diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2014-09-30 12:16:25 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2014-10-20 09:08:26 +0200 |
| commit | 1637d480f873ca305f7f090e3b3bc92430b5892f (patch) | |
| tree | c254049d778fe41f11b35623561173873c6a1177 /arch/arm/boot/dts/ste-href-tvk1281618.dtsi | |
| parent | 51d39936acba666774b596829277db3e13e5e970 (diff) | |
pinctrl: nomadik: force-convert to generic config bindings
This converts the Nomadik pin controller and all associated device
trees to use the standard, generic config bindings for pin controllers.
There are no such device trees deployed in the wild so this is
safe to do to set a good example.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'arch/arm/boot/dts/ste-href-tvk1281618.dtsi')
| -rw-r--r-- | arch/arm/boot/dts/ste-href-tvk1281618.dtsi | 12 |
1 files changed, 6 insertions, 6 deletions
diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 18b65d1b14f2..062c6aae3afa 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -130,7 +130,7 @@ tc35893 { tc35893_tvk_mode: tc35893_tvk { tvk_cfg { - ste,pins = "GPIO218_AH11"; + pins = "GPIO218_AH11"; ste,config = <&gpio_in_pu>; }; }; @@ -138,7 +138,7 @@ prox { prox_tvk_mode: prox_tvk { tvk_cfg { - ste,pins = "GPIO217_AH12"; + pins = "GPIO217_AH12"; ste,config = <&gpio_in_pu>; }; }; @@ -146,7 +146,7 @@ hall { hall_tvk_mode: hall_tvk { tvk_cfg { - ste,pins = "GPIO145_C13"; + pins = "GPIO145_C13"; ste,config = <&gpio_in_pu>; }; }; @@ -155,7 +155,7 @@ accel_tvk_mode: accel_tvk { /* Accelerometer interrupt lines 1 & 2 */ tvk_cfg { - ste,pins = "GPIO82_C1", "GPIO83_D3"; + pins = "GPIO82_C1", "GPIO83_D3"; ste,config = <&gpio_in_pu>; }; }; @@ -164,11 +164,11 @@ magneto_tvk_mode: magneto_tvk { /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ tvk_cfg1 { - ste,pins = "GPIO31_V3"; + pins = "GPIO31_V3"; ste,config = <&gpio_in_pu>; }; tvk_cfg2 { - ste,pins = "GPIO32_V2"; + pins = "GPIO32_V2"; ste,config = <&gpio_in_pd>; }; }; |