diff options
| author | Chen-Yu Tsai <wens@csie.org> | 2015-03-10 19:59:24 +0800 |
|---|---|---|
| committer | Maxime Ripard <maxime.ripard@free-electrons.com> | 2015-04-27 08:20:29 +0200 |
| commit | b5c26d66a4bba25b3a7f1c6ff599975f448e54bd (patch) | |
| tree | a839971da2016db4536ac35466798bc094d9615b /arch/arm/boot/dts/sun6i-a31-hummingbird.dts | |
| parent | 878c4ded1f15e6c2231b5d05bc8f21920f8a777f (diff) | |
ARM: dts: sun6i: hummingbird: Enable the onboard WiFi module
The Hummingbird A31 has an AMPAK AP6210 WiFi+Bluetooth module. The
WiFi part is a BCM43362 IC connected to MMC1 in the A31 SoC via SDIO.
The IC also takes a power enable signal via GPIO. This is supported
with the new power sequencing bindings.
The WiFi module supports out-of-band interrupt signaling via GPIO,
but this is not enabled yet.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch/arm/boot/dts/sun6i-a31-hummingbird.dts')
| -rw-r--r-- | arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index d13c88c6509a..25a3ef49bb71 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -61,6 +61,11 @@ chosen { bootargs = "earlyprintk console=ttyS0,115200"; }; + + wifi_pwrseq: wifi_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ + }; }; &ehci0 { @@ -127,6 +132,16 @@ allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; +&mmc1 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc1_pins_a>, <&wifi_reset_pin_hummingbird>; + vmmc-supply = <&vcc_wifi>; + mmc-pwrseq = <&wifi_pwrseq>; + bus-width = <4>; + non-removable; + status = "okay"; +}; + &ohci0 { status = "okay"; }; @@ -138,6 +153,13 @@ allwinner,drive = <SUN4I_PINCTRL_10_MA>; allwinner,pull = <SUN4I_PINCTRL_PULL_UP>; }; + + wifi_reset_pin_hummingbird: wifi_reset_pin@0 { + allwinner,pins = "PG10"; + allwinner,function = "gpio_out"; + allwinner,drive = <SUN4I_PINCTRL_10_MA>; + allwinner,pull = <SUN4I_PINCTRL_NO_PULL>; + }; }; &p2wi { |