Merge tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc

Pull MMC updates from Chris Ball:
 "MMC highlights for 3.15:

  Core:
   - CONFIG_MMC_UNSAFE_RESUME=y is now default behavior
   - DT bindings for SDHCI UHS, eMMC HS200, high-speed DDR, at 1.8/1.2V
   - Add GPIO descriptor based slot-gpio card detect API

  Drivers:
   - dw_mmc: Refactor SOCFPGA support as a variant inside dw_mmc-pltfm.c
   - mmci: Support HW busy detection on ux500
   - omap: Support MMC_ERASE
   - omap_hsmmc: Support MMC_PM_KEEP_POWER, MMC_PM_WAKE_SDIO_IRQ, (a)cmd23
   - rtsx: Support pre-req/post-req async
   - sdhci: Add support for Realtek RTS5250 controllers
   - sdhci-acpi: Add support for 80860F16, fix 80860F14/SDIO card detect
   - sdhci-msm: Add new driver for Qualcomm SDHCI chipset support
   - sdhci-pxav3: Add support for Marvell Armada 380 and 385 SoCs"

* tag 'mmc-updates-for-3.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (102 commits)
  mmc: sdhci-acpi: Intel SDIO has broken card detect
  mmc: sdhci-pxav3: add support for the Armada 38x SDHCI controller
  mmc: sdhci-msm: Add platform_execute_tuning implementation
  mmc: sdhci-msm: Initial support for Qualcomm chipsets
  mmc: sdhci-msm: Qualcomm SDHCI binding documentation
  sdhci: only reprogram retuning timer when flag is set
  mmc: rename ARCH_BCM to ARCH_BCM_MOBILE
  mmc: sdhci: Allow for irq being shared
  mmc: sdhci-acpi: Add device id 80860F16
  mmc: sdhci-acpi: Fix broken card detect for ACPI HID 80860F14
  mmc: slot-gpio: Add GPIO descriptor based CD GPIO API
  mmc: slot-gpio: Split out CD IRQ request into a separate function
  mmc: slot-gpio: Record GPIO descriptors instead of GPIO numbers
  Revert "dts: socfpga: Add support for SD/MMC on the SOCFPGA platform"
  mmc: sdhci-spear: use generic card detection gpio support
  mmc: sdhci-spear: remove support for power gpio
  mmc: sdhci-spear: simplify resource handling
  mmc: sdhci-spear: fix platform_data usage
  mmc: sdhci-spear: fix error handling paths for DT
  mmc: sdhci-bcm-kona: fix build errors when built-in
  ...

6 files changed, 108 insertions, 0 deletions

diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index 9e3caf3d19fb..1c0f8e1893ae 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -154,6 +154,22 @@
 			ti,hwmods = "counter_32k";
 		};
 
+		dra7_ctrl_general: tisyscon@4a002e00 {
+			compatible = "syscon";
+			reg = <0x4a002e00 0x7c>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0 0x4>;
+			syscon = <&dra7_ctrl_general>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		dra7_pmx_core: pinmux@4a003400 {
 			compatible = "pinctrl-single";
 			reg = <0x4a003400 0x0464>;
@@ -543,6 +559,7 @@
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
 			status = "disabled";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap2430.dtsi b/arch/arm/boot/dts/omap2430.dtsi
index 9d2f028fd687..d09697dab55e 100644
--- a/arch/arm/boot/dts/omap2430.dtsi
+++ b/arch/arm/boot/dts/omap2430.dtsi
@@ -29,6 +29,22 @@
 			pinctrl-single,function-mask = <0x3f>;
 		};
 
+		omap2_scm_general: tisyscon@49002270 {
+			compatible = "syscon";
+			reg = <0x49002270 0x240>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x230 0x4>;
+			syscon = <&omap2_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		gpio1: gpio@4900c000 {
 			compatible = "ti,omap2-gpio";
 			reg = <0x4900c000 0x200>;
@@ -188,6 +204,7 @@
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap3-ldp.dts b/arch/arm/boot/dts/omap3-ldp.dts
index ddce0d807f70..0abe986a4ecc 100644
--- a/arch/arm/boot/dts/omap3-ldp.dts
+++ b/arch/arm/boot/dts/omap3-ldp.dts
@@ -174,8 +174,20 @@
 };
 
 &mmc1 {
+	/* See 35xx errata 2.1.1.128 in SPRZ278F */
+	compatible = "ti,omap3-pre-es3-hsmmc";
 	vmmc-supply = <&vmmc1>;
 	bus-width = <4>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+};
+
+&mmc2 {
+	status="disabled";
+};
+
+&mmc3 {
+	status="disabled";
 };
 
 &omap3_pmx_core {
@@ -209,6 +221,17 @@
 			0x174 (PIN_OUTPUT | MUX_MODE0)	/* hsusb0_stp.hsusb0_stp */
 		>;
 	};
+
+	mmc1_pins: pinmux_mmc1_pins {
+		pinctrl-single,pins = <
+			OMAP3_CORE1_IOPAD(0x2144, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_clk.mmc1_clk */
+			OMAP3_CORE1_IOPAD(0x2146, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_cmd.mmc1_cmd */
+			OMAP3_CORE1_IOPAD(0x2148, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat0.mmc1_dat0 */
+			OMAP3_CORE1_IOPAD(0x214A, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat1.mmc1_dat1 */
+			OMAP3_CORE1_IOPAD(0x214C, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat2.mmc1_dat2 */
+			OMAP3_CORE1_IOPAD(0x214e, PIN_INPUT_PULLUP | MUX_MODE0)	/* mmc1_dat3.mmc1_dat3 */
+		>;
+	};
 };
 
 &usb_otg_hs {
diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi
index 3d05eff67e25..5e5790f631eb 100644
--- a/arch/arm/boot/dts/omap3.dtsi
+++ b/arch/arm/boot/dts/omap3.dtsi
@@ -181,6 +181,22 @@
 			pinctrl-single,function-mask = <0xff1f>;
 		};
 
+		omap3_scm_general: tisyscon@48002270 {
+			compatible = "syscon";
+			reg = <0x48002270 0x2f0>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x2b0 0x4>;
+			syscon = <&omap3_scm_general>;
+			pbias_mmc_reg: pbias_mmc_omap2430 {
+				regulator-name = "pbias_mmc_omap2430";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		gpio1: gpio@48310000 {
 			compatible = "ti,omap3-gpio";
 			reg = <0x48310000 0x200>;
@@ -395,6 +411,7 @@
 			ti,dual-volt;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 2b4c1cbbce33..27fcac874742 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -191,6 +191,22 @@
 			pinctrl-single,function-mask = <0x7fff>;
 		};
 
+		omap4_padconf_global: tisyscon@4a1005a0 {
+			compatible = "syscon";
+			reg = <0x4a1005a0 0x170>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap4_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap4 {
+				regulator-name = "pbias_mmc_omap4";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -427,6 +443,7 @@
 			ti,needs-special-reset;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {
diff --git a/arch/arm/boot/dts/omap5.dtsi b/arch/arm/boot/dts/omap5.dtsi
index 19155bb84835..6f3de22fb266 100644
--- a/arch/arm/boot/dts/omap5.dtsi
+++ b/arch/arm/boot/dts/omap5.dtsi
@@ -198,6 +198,22 @@
 			pinctrl-single,function-mask = <0x7fff>;
 		};
 
+		omap5_padconf_global: tisyscon@4a002da0 {
+			compatible = "syscon";
+			reg = <0x4A002da0 0xec>;
+		};
+
+		pbias_regulator: pbias_regulator {
+			compatible = "ti,pbias-omap";
+			reg = <0x60 0x4>;
+			syscon = <&omap5_padconf_global>;
+			pbias_mmc_reg: pbias_mmc_omap5 {
+				regulator-name = "pbias_mmc_omap5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3000000>;
+			};
+		};
+
 		sdma: dma-controller@4a056000 {
 			compatible = "ti,omap4430-sdma";
 			reg = <0x4a056000 0x1000>;
@@ -480,6 +496,7 @@
 			ti,needs-special-reset;
 			dmas = <&sdma 61>, <&sdma 62>;
 			dma-names = "tx", "rx";
+			pbias-supply = <&pbias_mmc_reg>;
 		};
 
 		mmc2: mmc@480b4000 {