summaryrefslogtreecommitdiff
path: root/arch/arm/mach-mx5/board-ccwmx51.h
diff options
context:
space:
mode:
authorIan Wisbon <ian.wisbon@timesys.com>2011-02-10 17:15:15 -0500
committerIan Wisbon <ian.wisbon@timesys.com>2011-02-10 17:15:15 -0500
commita9d2ba1444b0af6c2d8534f0b306660ffc045bc6 (patch)
tree79b396bf70ae3795e6ee9a3b645e64f7e29474e7 /arch/arm/mach-mx5/board-ccwmx51.h
parenteffff5718c380983788fe6c380671c18e15ac7c2 (diff)
Linux 2.6.31 Release for Digi ConnectCore Wi-i.MX boards2.6.31-digi-201102101717
Diffstat (limited to 'arch/arm/mach-mx5/board-ccwmx51.h')
-rw-r--r--arch/arm/mach-mx5/board-ccwmx51.h77
1 files changed, 70 insertions, 7 deletions
diff --git a/arch/arm/mach-mx5/board-ccwmx51.h b/arch/arm/mach-mx5/board-ccwmx51.h
index 6696c27c5c36..54376d190e82 100644
--- a/arch/arm/mach-mx5/board-ccwmx51.h
+++ b/arch/arm/mach-mx5/board-ccwmx51.h
@@ -20,8 +20,14 @@
#else
#define UART1_ENABLED 0
#endif
-#define UART1_MODE MODE_DCE
+#if defined CONFIG_UART1_IRDA_ENABLED
+#define UART1_IR IRDA
+#else
#define UART1_IR NO_IRDA
+#endif
+#define UART1_MODE MODE_DCE
+#define UART1_DMA_ENABLED 0
+
/* UART 2 configuration */
#if defined CONFIG_UART2_ENABLED
@@ -29,8 +35,13 @@
#else
#define UART2_ENABLED 0
#endif
-#define UART2_MODE MODE_DCE
+#if defined CONFIG_UART2_IRDA_ENABLED
+#define UART2_IR IRDA
+#else
#define UART2_IR NO_IRDA
+#endif
+#define UART2_MODE MODE_DCE
+#define UART2_DMA_ENABLED 0
/* UART 3 configuration */
#if defined CONFIG_UART3_ENABLED
@@ -38,19 +49,71 @@
#else
#define UART3_ENABLED 0
#endif
-#define UART3_MODE MODE_DCE
+#if defined CONFIG_UART3_IRDA_ENABLED
+#define UART3_IR IRDA
+#else
#define UART3_IR NO_IRDA
+#endif
+#define UART3_MODE MODE_DCE
+#define UART3_DMA_ENABLED 0
/*!
* Specifies if the Irda transmit path is inverting
*/
#define MXC_IRDA_TX_INV 0
-/*!
- * Specifies if the Irda receive path is inverting
- */
-#define MXC_IRDA_RX_INV 0
#define MXC_LL_UART_PADDR UART1_BASE_ADDR
#define MXC_LL_UART_VADDR AIPS1_IO_ADDRESS(UART1_BASE_ADDR)
+/* Second touch interface configuration */
+#ifdef CONFIG_CCWMX51_SECOND_TOUCH
+#ifdef CONFIG_JSCCWMX51_V1
+/* Settings for the JSCCWMX51 Board RevA, for the DISP0 */
+#elif defined(CONFIG_JSCCWMX51_V2)
+/* Settings for the JSCCWMX51 Board RevB, for the DISP0/DISP1 */
+#endif /* CONFIG_JSCCWMX51_VX */
+#endif /* CONFIG_CCWMX51_SECOND_TOUCH */
+
+/* AD9389 interrupt */
+#ifdef CONFIG_JSCCWMX51_V1
+#define AD9389_GPIO_IRQ MX51_PIN_GPIO1_4
+#elif defined(CONFIG_JSCCWMX51_V2)
+#define AD9389_GPIO_IRQ MX51_PIN_GPIO1_0
+#endif
+
+
+/* Set Base board revision */
+#ifdef CONFIG_JSCCWMX51_V1
+/* Board revision and mach name postfix */
+#define BASE_BOARD_REV 1
+#define BOARD_NAME " on a EAK board"
+/* SD1 card detect irq */
+#define CCWMX51_SD1_CD_IRQ IOMUX_TO_IRQ(MX51_PIN_GPIO1_0)
+/* Second touch settings */
+#define SECOND_TS_IRQ_PIN MX51_PIN_DI1_D0_CS
+#define SECOND_TS_SPI_SS_PIN MX51_PIN_DI1_D1_CS
+#elif defined(CONFIG_JSCCWMX51_V2)
+/* Board revision */
+#define BASE_BOARD_REV 2
+#define BOARD_NAME " on a JSK board"
+/* SD1 card detect irq, not present CD line... */
+#define CCWMX51_SD1_CD_IRQ 0
+/* Second touch settings */
+#define SECOND_TS_IRQ_PIN MX51_PIN_DI1_D0_CS
+#define SECOND_TS_SPI_SS_PIN MX51_PIN_CSPI1_RDY
+#else
+#define BASE_BOARD_REV 0
+#define BOARD_NAME " on an undefined board"
+#endif
+
+/* framebuffer settings */
+#if defined(CONFIG_CCWMX51_DISP1) && defined(CONFIG_CCWMX51_DISP2)
+#define FB_MEM_SIZE SZ_32M
+#else
+#define FB_MEM_SIZE SZ_16M
+#endif
+
+void ccwmx51_2nd_touch_gpio_init(void);
+void ccwmx51_init_2nd_touch(void);
+
#endif /* __ASM_ARCH_MXC_BOARD_CCWMX51_H__ */