ENGR00143296-1 Add mc34708 PMIC support for mx53 Ripley Quick Start board.

Add mc34708 machine level driver support for mx53 Ripley Quick Start board.

Signed-off-by: Zou Weihua -wayne zou <b36644@freescale.com>

6 files changed, 409 insertions, 20 deletions

diff --git a/arch/arm/mach-mx5/Makefile b/arch/arm/mach-mx5/Makefile
index 784fb2632dbd..96da3738c1ca 100644
--- a/arch/arm/mach-mx5/Makefile
+++ b/arch/arm/mach-mx5/Makefile
@@ -15,7 +15,7 @@ obj-$(CONFIG_MACH_MX51_BABBAGE) += mx51_babbage.o mx51_babbage_pmic_mc13892.o
 obj-$(CONFIG_MACH_MX53_EVK) += mx53_evk.o mx53_evk_pmic_mc13892.o
 obj-$(CONFIG_MACH_MX53_ARD) += mx53_ard.o mx53_ard_pmic_ltc3589.o
 obj-$(CONFIG_MACH_MX53_SMD) += mx53_smd.o mx53_smd_pmic_da9053.o
-obj-$(CONFIG_MACH_MX53_LOCO) += mx53_loco.o mx53_loco_pmic_da9053.o
+obj-$(CONFIG_MACH_MX53_LOCO) += mx53_loco.o mx53_loco_pmic_mc34708.o mx53_loco_pmic_da9053.o
 obj-$(CONFIG_MACH_MX50_ARM2) += mx50_arm2.o mx50_arm2_pmic_mc13892.o
 obj-$(CONFIG_MACH_MX50_RDP) += mx50_rdp.o mx50_rdp_pmic_mc13892.o mx50_rdp_pmic_mc34708.o
 obj-$(CONFIG_MXC_BLUETOOTH_RFKILL) += mx53_smd_rfkill.o
diff --git a/arch/arm/mach-mx5/mx53_loco.c b/arch/arm/mach-mx5/mx53_loco.c
index 7efd817ea724..f92c65d4bc58 100644
--- a/arch/arm/mach-mx5/mx53_loco.c
+++ b/arch/arm/mach-mx5/mx53_loco.c
@@ -45,6 +45,7 @@
 #include <linux/mxcfb.h>
 #include <linux/pwm_backlight.h>
 #include <linux/fec.h>
+#include <linux/powerkey.h>
 #include <linux/ahci_platform.h>
 #include <linux/gpio_keys.h>
 #include <linux/mfd/da9052/da9052.h>
@@ -68,6 +69,7 @@
 #include "crm_regs.h"
 #include "devices.h"
 #include "usb.h"
+#include "pmic.h"
 
 /*!
  * @file mach-mx5/mx53_loco.c
@@ -105,8 +107,7 @@
 #define USER_LED_EN			(6*32 + 7)	/* GPIO_7_7 */
 #define USB_PWREN			(6*32 + 8)	/* GPIO_7_8 */
 #define NIRQ				(6*32 + 11)	/* GPIO7_11 */
-
-extern int __init mx53_loco_init_da9052(void);
+#define MX53_LOCO_MC34708_IRQ    (6*32 + 11)	/* GPIO7_11 */
 
 static iomux_v3_cfg_t mx53_loco_pads[] = {
 	/* FEC */
@@ -304,7 +305,6 @@ static struct fec_platform_data fec_data = {
 };
 
 static struct mxc_dvfs_platform_data dvfs_core_data = {
-	.reg_id = "DA9052_BUCK_CORE",
 	.clk1_id = "cpu_clk",
 	.clk2_id = "gpc_dvfs_clk",
 	.gpc_cntr_offset = MXC_GPC_CNTR_OFFSET,
@@ -327,13 +327,9 @@ static struct mxc_dvfs_platform_data dvfs_core_data = {
 	.delay_time = 30,
 };
 
-static struct mxc_bus_freq_platform_data bus_freq_data = {
-	.gp_reg_id = "DA9052_BUCK_CORE",
-	.lp_reg_id = "DA9052_BUCK_PRO",
-};
+static struct mxc_bus_freq_platform_data bus_freq_data;
 
 static struct tve_platform_data tve_data = {
-	.dac_reg = "DA9052_LDO7",
 	.boot_enable = MXC_TVE_VGA,
 };
 
@@ -735,6 +731,31 @@ static void __init loco_add_device_buttons(void)
 static void __init loco_add_device_buttons(void) {}
 #endif
 
+static void mxc_register_powerkey(pwrkey_callback pk_cb)
+{
+	pmic_event_callback_t power_key_event;
+
+	power_key_event.param = (void *)1;
+	power_key_event.func = (void *)pk_cb;
+	pmic_event_subscribe(EVENT_PWRONI, power_key_event);
+}
+
+static int mxc_pwrkey_getstatus(int id)
+{
+	int sense;
+
+	pmic_read_reg(REG_INT_SENSE1, &sense, 0xffffffff);
+	if (sense & (1 << 3))
+		return 0;
+
+	return 1;
+}
+
+static struct power_key_platform_data pwrkey_data = {
+	.key_value = KEY_F4,
+	.register_pwrkey = mxc_register_powerkey,
+	.get_key_status = mxc_pwrkey_getstatus,
+};
 
 /*!
  * Board specific fixup function. It is called by \b setup_arch() in
@@ -865,6 +886,9 @@ static void __init mx53_loco_io_init(void)
 	/* LCD panel power enable */
 	gpio_request(DISP0_POWER_EN, "disp0-power-en");
 	gpio_direction_output(DISP0_POWER_EN, 1);
+
+	gpio_request(MX53_LOCO_MC34708_IRQ, "pmic-int");
+	gpio_direction_input(MX53_LOCO_MC34708_IRQ);
 }
 
 /*!
@@ -890,7 +914,21 @@ static void __init mxc_board_init(void)
 	mxc_register_device(&mxci2c_devices[1], &mxci2c_data);
 	mxc_register_device(&mxci2c_devices[2], &mxci2c_data);
 
-	mx53_loco_init_da9052();
+    if (board_is_mx53_loco_mc34708()) {
+		mx53_loco_init_mc34708();
+		dvfs_core_data.reg_id = "SW1A";
+		tve_data.dac_reg = "VDAC";
+		bus_freq_data.gp_reg_id = "SW1A";
+		bus_freq_data.lp_reg_id = "SW2";
+		mxc_register_device(&mxc_powerkey_device, &pwrkey_data);
+	}
+    else {
+		mx53_loco_init_da9052();
+		dvfs_core_data.reg_id = "DA9052_BUCK_CORE";
+		tve_data.dac_reg = "DA9052_LDO7";
+		bus_freq_data.gp_reg_id = "DA9052_BUCK_CORE";
+		bus_freq_data.lp_reg_id = "DA9052_BUCK_PRO";
+	}
 
 	mxc_register_device(&mxc_rtc_device, NULL);
 	mxc_register_device(&mxc_ipu_device, &mxc_ipu_data);
diff --git a/arch/arm/mach-mx5/mx53_loco_pmic_da9053.c b/arch/arm/mach-mx5/mx53_loco_pmic_da9053.c
index ddb905452067..9df700006ed0 100644
--- a/arch/arm/mach-mx5/mx53_loco_pmic_da9053.c
+++ b/arch/arm/mach-mx5/mx53_loco_pmic_da9053.c
@@ -36,6 +36,7 @@
 #include <mach/irqs.h>
 #include <mach/iomux-mx53.h>
 #include <mach/gpio.h>
+#include "pmic.h"
 
 #define DA9052_LDO(max, min, rname, suspend_mv) \
 {\
diff --git a/arch/arm/mach-mx5/mx53_loco_pmic_mc34708.c b/arch/arm/mach-mx5/mx53_loco_pmic_mc34708.c
new file mode 100644
index 000000000000..d2571c247498
--- /dev/null
+++ b/arch/arm/mach-mx5/mx53_loco_pmic_mc34708.c
@@ -0,0 +1,327 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/err.h>
+#include <linux/pmic_external.h>
+#include <linux/regulator/machine.h>
+#include <linux/mfd/mc34708/core.h>
+#include <mach/irqs.h>
+#include <mach/iomux-mx53.h>
+#include <mach/gpio.h>
+#include "pmic.h"
+
+/*
+ * Convenience conversion.
+ * Here atm, maybe there is somewhere better for this.
+ */
+#define mV_to_uV(mV) (mV * 1000)
+#define uV_to_mV(uV) (uV / 1000)
+#define V_to_uV(V) (mV_to_uV(V * 1000))
+#define uV_to_V(uV) (uV_to_mV(uV) / 1000)
+
+/* regulator standby mask */
+#define GEN1_STBY_MASK		(1 << 1)
+#define GEN2_STBY_MASK		(1 << 13)
+#define PLL_STBY_MASK		(1 << 16)
+#define USB2_STBY_MASK		(1 << 19)
+#define USB_EN_MASK			(1 << 3)
+
+#define REG_MODE_0_ALL_MASK	(GEN1_STBY_MASK)
+
+#define SW1A_MODE_MASK		(0xf << 0)
+#define SW2_MODE_MASK		(0xf << 14)
+#define SW1A_MODE_VALUE		(0xc << 0)
+#define SW2_MODE_VALUE		(0xc << 14)
+
+#define REG_SW_1_2_MASK	(SW1A_MODE_MASK | SW2_MODE_MASK)
+#define REG_SW_1_2_VALUE	(SW1A_MODE_VALUE | SW2_MODE_VALUE)
+
+#define SW3_MODE_MASK		(0xf << 0)
+#define SW4A_MODE_MASK		(0xf << 6)
+#define SW4B_MODE_MASK		(0xf << 12)
+#define SW5_MODE_MASK		(0xf << 18)
+
+#define SW3_MODE_VALUE		(0x0 << 0)
+#define SW4A_MODE_VALUE		(0xc << 6)
+#define SW4B_MODE_VALUE		(0xc << 12)
+#define SW5_MODE_VALUE		(0xc << 18)
+
+#define REG_SW_3_4_5_MASK	(SW3_MODE_MASK | SW4A_MODE_MASK\
+				| SW4B_MODE_MASK | SW5_MODE_MASK)
+#define REG_SW_3_4_5_VALUE	(SW3_MODE_VALUE | SW4A_MODE_VALUE\
+					| SW4B_MODE_VALUE | SW5_MODE_VALUE)
+
+#define SWBST_MODE_MASK		(0x3 << 5)
+#define SWBST_MODE_VALUE	(0x0 << 5)
+
+#define REG_SWBST_MODE_MASK	(SWBST_MODE_MASK)
+#define REG_SWBST_MODE_VALUE	(SWBST_MODE_VALUE)
+
+#define SWHOLD_MASK		(0x1 << 12)
+
+#define MC34708_I2C_DEVICE_NAME  "mc34708"
+/* 7-bit I2C bus slave address */
+#define MC34708_I2C_ADDR         (0x08)
+#define MX53_LOCO_MC34708_IRQ    (6*32 + 11)	/* GPIO7_11 */
+
+struct mc34708;
+
+static struct regulator_init_data sw1a_init = {
+	.constraints = {
+		.name = "SW1",
+		.min_uV = 650000,
+		.max_uV = 1437500,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.valid_modes_mask = 0,
+		.always_on = 1,
+		.boot_on = 1,
+		.initial_state = PM_SUSPEND_MEM,
+		.state_mem = {
+			.uV = 850000,
+			.mode = REGULATOR_MODE_NORMAL,
+			.enabled = 1,
+		},
+	},
+};
+
+static struct regulator_init_data sw1b_init = {
+	.constraints = {
+		.name = "SW1B",
+		.min_uV = 650000,
+		.max_uV = 1437500,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.valid_modes_mask = 0,
+		.always_on = 1,
+		.boot_on = 1,
+	},
+};
+
+static struct regulator_init_data sw2_init = {
+	.constraints = {
+		.name = "SW2",
+		.min_uV = 650000,
+		.max_uV = 1437500,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.boot_on = 1,
+		.initial_state = PM_SUSPEND_MEM,
+		.state_mem = {
+			.uV = 950000,
+			.mode = REGULATOR_MODE_NORMAL,
+			.enabled = 1,
+		},
+	}
+};
+
+static struct regulator_init_data sw3_init = {
+	.constraints = {
+		.name = "SW3",
+		.min_uV = 650000,
+		.max_uV = 1425000,
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw4a_init = {
+	.constraints = {
+		.name = "SW4A",
+		.min_uV = mV_to_uV(1200),
+		.max_uV = mV_to_uV(3300),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw4b_init = {
+	.constraints = {
+		.name = "SW4B",
+		.min_uV = mV_to_uV(1200),
+		.max_uV = mV_to_uV(3300),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data sw5_init = {
+	.constraints = {
+		.name = "SW5",
+		.min_uV = mV_to_uV(1200),
+		.max_uV = mV_to_uV(1975),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vrefddr_init = {
+	.constraints = {
+		.name = "VREFDDR",
+		.always_on = 1,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb_init = {
+	.constraints = {
+		.name = "VUSB",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data swbst_init = {
+	.constraints = {
+		.name = "SWBST",
+		.valid_ops_mask = REGULATOR_CHANGE_STATUS,
+		.boot_on = 1,
+	}
+};
+
+static struct regulator_init_data vpll_init = {
+	.constraints = {
+		.name = "VPLL",
+		.min_uV = mV_to_uV(1200),
+		.max_uV = mV_to_uV(1800),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1,
+	},
+};
+
+static struct regulator_init_data vdac_init = {
+	.constraints = {
+		.name = "VDAC",
+		.min_uV = mV_to_uV(2500),
+		.max_uV = mV_to_uV(2775),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data vusb2_init = {
+	.constraints = {
+		.name = "VUSB2",
+		.min_uV = mV_to_uV(2500),
+		.max_uV = mV_to_uV(3000),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.boot_on = 1,
+		.always_on = 1,
+	}
+};
+
+static struct regulator_init_data vgen1_init = {
+	.constraints = {
+		.name = "VGEN1",
+		.min_uV = mV_to_uV(1200),
+		.max_uV = mV_to_uV(1550),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+		.initial_state = PM_SUSPEND_MEM,
+		.state_mem = {
+			.uV = 950000,
+			.mode = REGULATOR_MODE_NORMAL,
+			.enabled = 1,
+		},
+	}
+};
+
+static struct regulator_init_data vgen2_init = {
+	.constraints = {
+		.name = "VGEN2",
+		.min_uV = mV_to_uV(2500),
+		.max_uV = mV_to_uV(3300),
+		.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+		.always_on = 1,
+	}
+};
+
+static int mc34708_regulator_init(struct mc34708 *mc34708)
+{
+	unsigned int value;
+
+	pmic_read_reg(REG_MC34708_IDENTIFICATION, &value, 0xffffff);
+	pr_info("PMIC MC34708 ID:0x%x\n", value);
+
+	/* setting switch operating mode for SW1/2 regulators */
+	pmic_read_reg(REG_MC34708_SW_1_2_OP, &value, 0xffffff);
+	value &= ~REG_SW_1_2_MASK;
+	value |= REG_SW_1_2_VALUE;
+	pmic_write_reg(REG_MC34708_SW_1_2_OP, value, 0xffffff);
+
+	/* setting switch operating mode for SW3/4/5 regulators */
+	pmic_read_reg(REG_MC34708_SW_3_4_5_OP, &value, 0xffffff);
+	value &= ~REG_SW_3_4_5_MASK;
+	value |= REG_SW_3_4_5_VALUE;
+	pmic_write_reg(REG_MC34708_SW_3_4_5_OP, value, 0xffffff);
+
+	/* setting switch operating mode for SWBST regulators */
+	pmic_read_reg(REG_MC34708_SWBST, &value, 0xffffff);
+	value &= ~REG_SWBST_MODE_MASK;
+	value |= REG_SWBST_MODE_VALUE;
+	pmic_write_reg(REG_MC34708_SWBST, value, 0xffffff);
+
+	/* clear SWHOLD bit  to enable USB MUX */
+	pmic_read_reg(REG_MC34708_USB_CONTROL, &value, 0xffffff);
+	value &= ~SWHOLD_MASK;
+	pmic_write_reg(REG_MC34708_USB_CONTROL, value, 0xffffff);
+
+	mc34708_register_regulator(mc34708, MC34708_SW1A, &sw1a_init);
+	mc34708_register_regulator(mc34708, MC34708_SW1B, &sw1b_init);
+	mc34708_register_regulator(mc34708, MC34708_SW2, &sw2_init);
+	mc34708_register_regulator(mc34708, MC34708_SW3, &sw3_init);
+	mc34708_register_regulator(mc34708, MC34708_SW4A, &sw4a_init);
+	mc34708_register_regulator(mc34708, MC34708_SW4B, &sw4b_init);
+	mc34708_register_regulator(mc34708, MC34708_SW5, &sw5_init);
+	mc34708_register_regulator(mc34708, MC34708_SWBST, &swbst_init);
+	mc34708_register_regulator(mc34708, MC34708_VPLL, &vpll_init);
+	mc34708_register_regulator(mc34708, MC34708_VREFDDR, &vrefddr_init);
+	mc34708_register_regulator(mc34708, MC34708_VDAC, &vdac_init);
+	mc34708_register_regulator(mc34708, MC34708_VUSB, &vusb_init);
+	mc34708_register_regulator(mc34708, MC34708_VUSB2, &vusb2_init);
+	mc34708_register_regulator(mc34708, MC34708_VGEN1, &vgen1_init);
+	mc34708_register_regulator(mc34708, MC34708_VGEN2, &vgen2_init);
+
+	regulator_has_full_constraints();
+
+	return 0;
+}
+
+static struct mc34708_platform_data mc34708_plat = {
+	.init = mc34708_regulator_init,
+};
+
+static struct i2c_board_info __initdata mc34708_i2c_device = {
+	I2C_BOARD_INFO(MC34708_I2C_DEVICE_NAME, MC34708_I2C_ADDR),
+	.irq = gpio_to_irq(MX53_LOCO_MC34708_IRQ),
+	.platform_data = &mc34708_plat,
+};
+
+int __init mx53_loco_init_mc34708(void)
+{
+	return i2c_register_board_info(0, &mc34708_i2c_device, 1);
+}
diff --git a/arch/arm/mach-mx5/pm.c b/arch/arm/mach-mx5/pm.c
index 95cf4a2eb894..d2e2c892c7bb 100644
--- a/arch/arm/mach-mx5/pm.c
+++ b/arch/arm/mach-mx5/pm.c
@@ -24,7 +24,6 @@
 #include <linux/cpufreq.h>
 #include <linux/iram_alloc.h>
 #include <linux/fsl_devices.h>
-#include <linux/mfd/da9052/da9052.h>
 #include <asm/mach-types.h>
 #include <asm/cacheflush.h>
 #include <asm/tlb.h>
@@ -72,7 +71,7 @@ void __iomem *suspend_param1;
 #define TZIC_WAKEUP1_OFFSET            0x0E04
 #define TZIC_WAKEUP2_OFFSET            0x0E08
 #define TZIC_WAKEUP3_OFFSET            0x0E0C
-#define GPIO7_0_11_IRQ_BIT		(0x1<<11)
+#define GPIO7_0_11_IRQ_BIT			   (0x1<<11)
 
 static void mx53_smd_loco_irq_wake_fixup(void)
 {
@@ -116,18 +115,17 @@ static int mx5_suspend_enter(suspend_state_t state)
 		flush_cache_all();
 
 		if (cpu_is_mx51() || cpu_is_mx53()) {
-			if (machine_is_mx53_smd() ||
-				machine_is_mx53_loco()) {
+			if ((machine_is_mx53_smd() ||
+				machine_is_mx53_loco()) &&
+				(!board_is_mx53_loco_mc34708())) {
 				if (board_is_rev(BOARD_REV_4) ||
 					machine_is_mx53_loco()) {
 					mx53_smd_loco_irq_wake_fixup();
 					da9053_suspend_cmd_sw();
 				} else {
-		/* for new OTP DA9053 board, enable other irq for wakeup */
-		/* otherwise disable other wakeup sources */
-					if (da9053_get_chip_version() !=
-						DA9053_VERSION_BB)
-						mx53_smd_loco_irq_wake_fixup();
+			/* for new OTP DA9053 board, comment out next */
+			/* line to enable other irq for wakeup */
+					mx53_smd_loco_irq_wake_fixup();
 					da9053_suspend_cmd_hw();
 				}
 			}
@@ -275,7 +273,7 @@ static int __init pm_init(void)
 		suspend_param1 =
 			cpu_is_mx51() ? (void *)SUSPEND_ID_MX51:(void *)SUSPEND_ID_MX53;
 		/* for mx53 ARD, doesn't operate DDR in suspend */
-		if (machine_is_mx53_ard())
+		if (machine_is_mx53_ard() || board_is_mx53_loco_mc34708())
 			suspend_param1 = (void *)SUSPEND_ID_NONE;
 		memcpy(suspend_iram_base, cpu_do_suspend_workaround,
 				SZ_4K);
diff --git a/arch/arm/mach-mx5/pmic.h b/arch/arm/mach-mx5/pmic.h
new file mode 100644
index 000000000000..ab2c9e3cfda3
--- /dev/null
+++ b/arch/arm/mach-mx5/pmic.h
@@ -0,0 +1,25 @@
+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __ASM_ARCH_MACH_PMIC_H__
+#define __ASM_ARCH_MACH_PMIC_H__
+
+extern int __init mx53_loco_init_da9052(void);
+extern int __init mx53_loco_init_mc34708(void);
+
+#endif