summaryrefslogtreecommitdiff
path: root/arch/arm/mach-nomadik
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2013-02-21 15:38:49 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2013-02-21 15:38:49 -0800
commita8f3740feb12928be1aad19659bf3527ea8d6d96 (patch)
treef455479d5b9edd38ed2ca2ab878d2217025960db /arch/arm/mach-nomadik
parent6c5096e5538b455bc3bea2b02588c380f070d8c6 (diff)
parent89dfe564b5926297ee29b973fe75e25c83c5e615 (diff)
Merge tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC device tree conversions from Arnd Bergmann: "These are device tree conversions for a number of platforms, with the intention of turning code from board files into device tree descriptions. Notable changes are: - davinci bindings for pinctrl, MTD, RTC, watchdog and i2c - nomadik bindings for all devices, removing the board files - bcm2835 bindings for mmc and i2c - tegra bindings for hdmi, keyboard, audio, as well as some updates - at91 bindings for hardware ecc and for devices on RM9200 - mxs bindings for cfa100xx - sunxi support for Miniand Hackberry board" * tag 'dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (72 commits) Revert "sunxi: a10-cubieboard: Add user LEDs to the device tree" Revert "sunxi: a13-olinuxino: Add user LED to the device tree" clk: tegra: initialise parent of uart clocks ARM: tegra: remove clock-frequency properties from serial nodes clk: tegra: fix driver to match DT binding clk: tegra: local arrays should be static clk: tegra: Add missing spinlock for hclk and pclk clk: tegra: Implement locking for super clock clk: tegra: fix wrong clock index between se to sata_cold sunxi: a13-olinuxino: Add user LED to the device tree ARM: davinci: da850 DT: add support for machine reboot ARM: davinci: da850: add wdt DT node ARM: davinci: da850: add DT node for I2C0 ARM: at91: at91sam9n12: add DT parameters to enable PMECC ARM: at91: at91sam9x5: add DT parameters to enable PMECC ARM: at91: add EMAC bindings to RM9200 DT ARM: at91: add SSC bindings to RM9200 DT ARM: at91: add MMC bindings to RM9200 DT ARM: at91: Animeo IP: enable watchdog support ARM: nomadik: fix OF compilation regression ...
Diffstat (limited to 'arch/arm/mach-nomadik')
-rw-r--r--arch/arm/mach-nomadik/Kconfig10
-rw-r--r--arch/arm/mach-nomadik/Makefile6
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c353
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.c358
-rw-r--r--arch/arm/mach-nomadik/cpu-8815.h4
-rw-r--r--arch/arm/mach-nomadik/i2c-8815nhk.c88
-rw-r--r--arch/arm/mach-nomadik/include/mach/hardware.h90
-rw-r--r--arch/arm/mach-nomadik/include/mach/irqs.h2
-rw-r--r--arch/arm/mach-nomadik/include/mach/uncompress.h1
9 files changed, 266 insertions, 646 deletions
diff --git a/arch/arm/mach-nomadik/Kconfig b/arch/arm/mach-nomadik/Kconfig
index 706dc5727bbe..82226a5d60ef 100644
--- a/arch/arm/mach-nomadik/Kconfig
+++ b/arch/arm/mach-nomadik/Kconfig
@@ -4,19 +4,13 @@ menu "Nomadik boards"
config MACH_NOMADIK_8815NHK
bool "ST 8815 Nomadik Hardware Kit (evaluation board)"
- select CLKSRC_NOMADIK_MTU
select NOMADIK_8815
+ select I2C
+ select I2C_ALGOBIT
endmenu
config NOMADIK_8815
bool
-config I2C_BITBANG_8815NHK
- tristate "Driver for bit-bang busses found on the 8815 NHK"
- depends on I2C && MACH_NOMADIK_8815NHK
- depends on PINCTRL_NOMADIK
- default y
- select I2C_ALGOBIT
-
endif
diff --git a/arch/arm/mach-nomadik/Makefile b/arch/arm/mach-nomadik/Makefile
index a42c9a33d3bf..1071c3b04d1a 100644
--- a/arch/arm/mach-nomadik/Makefile
+++ b/arch/arm/mach-nomadik/Makefile
@@ -9,9 +9,3 @@
# Cpu revision
obj-$(CONFIG_NOMADIK_8815) += cpu-8815.o
-
-# Specific board support
-obj-$(CONFIG_MACH_NOMADIK_8815NHK) += board-nhk8815.o
-
-# Nomadik extra devices
-obj-$(CONFIG_I2C_BITBANG_8815NHK) += i2c-8815nhk.o
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
deleted file mode 100644
index aaed48d94374..000000000000
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ /dev/null
@@ -1,353 +0,0 @@
-/*
- * linux/arch/arm/mach-nomadik/board-8815nhk.c
- *
- * Copyright (C) STMicroelectronics
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2, as
- * published by the Free Software Foundation.
- *
- * NHK15 board specifc driver definition
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/amba/bus.h>
-#include <linux/amba/mmci.h>
-#include <linux/interrupt.h>
-#include <linux/gpio.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/fsmc.h>
-#include <linux/mtd/onenand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/i2c.h>
-#include <linux/io.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-#include <linux/platform_data/clocksource-nomadik-mtu.h>
-#include <asm/sizes.h>
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/flash.h>
-#include <asm/mach/time.h>
-#include <mach/irqs.h>
-
-#include "cpu-8815.h"
-
-/* Initial value for SRC control register: all timers use MXTAL/8 source */
-#define SRC_CR_INIT_MASK 0x00007fff
-#define SRC_CR_INIT_VAL 0x2aaa8000
-
-#define ALE_OFF 0x1000000
-#define CLE_OFF 0x800000
-
-/* These addresses span 16MB, so use three individual pages */
-static struct resource nhk8815_nand_resources[] = {
- {
- .name = "nand_data",
- .start = 0x40000000,
- .end = 0x40000000 + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "nand_addr",
- .start = 0x40000000 + ALE_OFF,
- .end = 0x40000000 +ALE_OFF + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "nand_cmd",
- .start = 0x40000000 + CLE_OFF,
- .end = 0x40000000 + CLE_OFF + SZ_16K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "fsmc_regs",
- .start = NOMADIK_FSMC_BASE,
- .end = NOMADIK_FSMC_BASE + SZ_4K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-/*
- * These partitions are the same as those used in the 2.6.20 release
- * shipped by the vendor; the first two partitions are mandated
- * by the boot ROM, and the bootloader area is somehow oversized...
- */
-static struct mtd_partition nhk8815_partitions[] = {
- {
- .name = "X-Loader(NAND)",
- .offset = 0,
- .size = SZ_256K,
- }, {
- .name = "MemInit(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- }, {
- .name = "BootLoader(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M,
- }, {
- .name = "Kernel zImage(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 3 * SZ_1M,
- }, {
- .name = "Root Filesystem(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 22 * SZ_1M,
- }, {
- .name = "User Filesystem(NAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct fsmc_nand_timings nhk8815_nand_timings = {
- .thiz = 0,
- .thold = 0x10,
- .twait = 0x0A,
- .tset = 0,
-};
-
-static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
- .nand_timings = &nhk8815_nand_timings,
- .partitions = nhk8815_partitions,
- .nr_partitions = ARRAY_SIZE(nhk8815_partitions),
- .width = FSMC_NAND_BW8,
-};
-
-static struct platform_device nhk8815_nand_device = {
- .name = "fsmc-nand",
- .id = -1,
- .resource = nhk8815_nand_resources,
- .num_resources = ARRAY_SIZE(nhk8815_nand_resources),
- .dev = {
- .platform_data = &nhk8815_nand_platform_data,
- },
-};
-
-/* These are the partitions for the OneNand device, different from above */
-static struct mtd_partition nhk8815_onenand_partitions[] = {
- {
- .name = "X-Loader(OneNAND)",
- .offset = 0,
- .size = SZ_256K,
- }, {
- .name = "MemInit(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_256K,
- }, {
- .name = "BootLoader(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = SZ_2M-SZ_256K,
- }, {
- .name = "SysImage(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 4 * SZ_1M,
- }, {
- .name = "Root Filesystem(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = 22 * SZ_1M,
- }, {
- .name = "User Filesystem(OneNAND)",
- .offset = MTDPART_OFS_APPEND,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct onenand_platform_data nhk8815_onenand_data = {
- .parts = nhk8815_onenand_partitions,
- .nr_parts = ARRAY_SIZE(nhk8815_onenand_partitions),
-};
-
-static struct resource nhk8815_onenand_resource[] = {
- {
- .start = 0x30000000,
- .end = 0x30000000 + SZ_128K - 1,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device nhk8815_onenand_device = {
- .name = "onenand-flash",
- .id = -1,
- .dev = {
- .platform_data = &nhk8815_onenand_data,
- },
- .resource = nhk8815_onenand_resource,
- .num_resources = ARRAY_SIZE(nhk8815_onenand_resource),
-};
-
-/* bus control reg. and bus timing reg. for CS0..CS3 */
-#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
-#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)
-
-static void __init nhk8815_onenand_init(void)
-{
-#ifdef CONFIG_MTD_ONENAND
- /* Set up SMCS0 for OneNand */
- writel(0x000030db, FSMC_BCR(0));
- writel(0x02100551, FSMC_BTR(0));
-#endif
-}
-
-static struct mmci_platform_data mmcsd_plat_data = {
- .ocr_mask = MMC_VDD_29_30,
- .f_max = 48000000,
- .gpio_wp = -1,
- .gpio_cd = 111,
- .cd_invert = true,
- .capabilities = MMC_CAP_MMC_HIGHSPEED |
- MMC_CAP_SD_HIGHSPEED | MMC_CAP_4_BIT_DATA,
-};
-
-static int __init nhk8815_mmcsd_init(void)
-{
- int ret;
-
- ret = gpio_request(112, "card detect bias");
- if (ret)
- return ret;
- gpio_direction_output(112, 0);
- amba_apb_device_add(NULL, "mmci", NOMADIK_SDI_BASE, SZ_4K, IRQ_SDMMC, 0, &mmcsd_plat_data, 0x10180180);
- return 0;
-}
-module_init(nhk8815_mmcsd_init);
-
-static struct resource nhk8815_eth_resources[] = {
- {
- .name = "smc91x-regs",
- .start = 0x34000000 + 0x300,
- .end = 0x34000000 + SZ_64K - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .start = NOMADIK_GPIO_TO_IRQ(115),
- .end = NOMADIK_GPIO_TO_IRQ(115),
- .flags = IORESOURCE_IRQ | IRQF_TRIGGER_RISING,
- }
-};
-
-static struct platform_device nhk8815_eth_device = {
- .name = "smc91x",
- .resource = nhk8815_eth_resources,
- .num_resources = ARRAY_SIZE(nhk8815_eth_resources),
-};
-
-static int __init nhk8815_eth_init(void)
-{
- int gpio_nr = 115; /* hardwired in the board */
- int err;
-
- err = gpio_request(gpio_nr, "eth_irq");
- if (!err) err = nmk_gpio_set_mode(gpio_nr, NMK_GPIO_ALT_GPIO);
- if (!err) err = gpio_direction_input(gpio_nr);
- if (err)
- pr_err("Error %i in %s\n", err, __func__);
- return err;
-}
-device_initcall(nhk8815_eth_init);
-
-static struct platform_device *nhk8815_platform_devices[] __initdata = {
- &nhk8815_nand_device,
- &nhk8815_onenand_device,
- &nhk8815_eth_device,
- /* will add more devices */
-};
-
-static void __init nomadik_timer_init(void)
-{
- u32 src_cr;
-
- /* Configure timer sources in "system reset controller" ctrl reg */
- src_cr = readl(io_p2v(NOMADIK_SRC_BASE));
- src_cr &= SRC_CR_INIT_MASK;
- src_cr |= SRC_CR_INIT_VAL;
- writel(src_cr, io_p2v(NOMADIK_SRC_BASE));
-
- nmdk_timer_init(io_p2v(NOMADIK_MTU0_BASE), IRQ_MTU0);
-}
-
-static struct i2c_board_info __initdata nhk8815_i2c0_devices[] = {
- {
- I2C_BOARD_INFO("stw4811", 0x2d),
- },
-};
-
-static struct i2c_board_info __initdata nhk8815_i2c1_devices[] = {
- {
- I2C_BOARD_INFO("camera", 0x10),
- },
- {
- I2C_BOARD_INFO("stw5095", 0x1a),
- },
- {
- I2C_BOARD_INFO("lis3lv02dl", 0x1d),
- },
-};
-
-static struct i2c_board_info __initdata nhk8815_i2c2_devices[] = {
- {
- I2C_BOARD_INFO("stw4811-usb", 0x2d),
- },
-};
-
-static unsigned long out_low[] = { PIN_OUTPUT_LOW };
-static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
-static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
-static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
-
-static struct pinctrl_map __initdata nhk8815_pinmap[] = {
- PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
- PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
- /* Hog in MMC/SD card mux */
- PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
- /* MCCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
- /* MCCMD */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
- /* MCCMDDIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
- /* MCDAT3-0 */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
- /* MCDAT0DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
- /* MCDAT31DIR */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
- /* MCMSFBCLK */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
- /* CD input GPIO */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
- /* CD bias drive */
- PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
-};
-
-static void __init nhk8815_platform_init(void)
-{
- pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
- cpu8815_platform_init();
- nhk8815_onenand_init();
- platform_add_devices(nhk8815_platform_devices,
- ARRAY_SIZE(nhk8815_platform_devices));
-
- amba_apb_device_add(NULL, "uart0", NOMADIK_UART0_BASE, SZ_4K, IRQ_UART0, 0, NULL, 0);
- amba_apb_device_add(NULL, "uart1", NOMADIK_UART1_BASE, SZ_4K, IRQ_UART1, 0, NULL, 0);
-
- i2c_register_board_info(0, nhk8815_i2c0_devices,
- ARRAY_SIZE(nhk8815_i2c0_devices));
- i2c_register_board_info(1, nhk8815_i2c1_devices,
- ARRAY_SIZE(nhk8815_i2c1_devices));
- i2c_register_board_info(2, nhk8815_i2c2_devices,
- ARRAY_SIZE(nhk8815_i2c2_devices));
-}
-
-MACHINE_START(NOMADIK, "NHK8815")
- /* Maintainer: ST MicroElectronics */
- .atag_offset = 0x100,
- .map_io = cpu8815_map_io,
- .init_irq = cpu8815_init_irq,
- .init_time = nomadik_timer_init,
- .init_machine = nhk8815_platform_init,
- .restart = cpu8815_restart,
-MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c
index 351404673f6c..21c1aa512640 100644
--- a/arch/arm/mach-nomadik/cpu-8815.c
+++ b/arch/arm/mach-nomadik/cpu-8815.c
@@ -25,138 +25,308 @@
#include <linux/slab.h>
#include <linux/irq.h>
#include <linux/dma-mapping.h>
-#include <linux/irqchip/arm-vic.h>
+#include <linux/irqchip.h>
#include <linux/platform_data/clk-nomadik.h>
#include <linux/platform_data/pinctrl-nomadik.h>
+#include <linux/pinctrl/machine.h>
+#include <linux/platform_data/clocksource-nomadik-mtu.h>
+#include <linux/of_irq.h>
+#include <linux/of_gpio.h>
+#include <linux/of_address.h>
+#include <linux/of_platform.h>
+#include <linux/mtd/fsmc.h>
+#include <linux/gpio.h>
+#include <linux/amba/mmci.h>
-#include <mach/hardware.h>
#include <mach/irqs.h>
+#include <asm/mach/arch.h>
#include <asm/mach/map.h>
+#include <asm/mach/time.h>
+#include <asm/mach-types.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
-#include "cpu-8815.h"
+/*
+ * These are the only hard-coded address offsets we still have to use.
+ */
+#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
+#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
+#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
+#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
+#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
+#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
+#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
+#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
+#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
+#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
+#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
+#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
+#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
+#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
+#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
+#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
+#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
+#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
+#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
+#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
+#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
+#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
+#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
+#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
+#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
+#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
+#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
+#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
+#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
+#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
+#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
+#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
+#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
+#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
+#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
+#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
+#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
+#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
+#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
+#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
+#define NOMADIK_UART1_VBASE 0xF01FB000
-/* The 8815 has 4 GPIO blocks, let's register them immediately */
-static resource_size_t __initdata cpu8815_gpio_base[] = {
- NOMADIK_GPIO0_BASE,
- NOMADIK_GPIO1_BASE,
- NOMADIK_GPIO2_BASE,
- NOMADIK_GPIO3_BASE,
+static unsigned long out_low[] = { PIN_OUTPUT_LOW };
+static unsigned long out_high[] = { PIN_OUTPUT_HIGH };
+static unsigned long in_nopull[] = { PIN_INPUT_NOPULL };
+static unsigned long in_pullup[] = { PIN_INPUT_PULLUP };
+
+static struct pinctrl_map __initdata nhk8815_pinmap[] = {
+ PIN_MAP_MUX_GROUP_DEFAULT("uart0", "pinctrl-stn8815", "u0_a_1", "u0"),
+ PIN_MAP_MUX_GROUP_DEFAULT("uart1", "pinctrl-stn8815", "u1_a_1", "u1"),
+ /* Hog in MMC/SD card mux */
+ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-stn8815", "mmcsd_a_1", "mmcsd"),
+ /* MCCLK */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO8_B10", out_low),
+ /* MCCMD */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO9_A10", in_pullup),
+ /* MCCMDDIR */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO10_C11", out_high),
+ /* MCDAT3-0 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO11_B11", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO12_A11", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO13_C12", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO14_B12", in_pullup),
+ /* MCDAT0DIR */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO15_A12", out_high),
+ /* MCDAT31DIR */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO16_C13", out_high),
+ /* MCMSFBCLK */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO24_C15", in_pullup),
+ /* CD input GPIO */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO111_H21", in_nopull),
+ /* CD bias drive */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO112_J21", out_low),
+ /* I2C0 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO62_D3", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO63_D2", in_pullup),
+ /* I2C1 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO53_L4", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO54_L3", in_pullup),
+ /* I2C2 */
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO73_C21", in_pullup),
+ PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-stn8815", "GPIO74_C20", in_pullup),
};
-static struct platform_device *
-cpu8815_add_gpio(int id, resource_size_t addr, int irq,
- struct nmk_gpio_platform_data *pdata)
+/* This is needed for LL-debug/earlyprintk/debug-macro.S */
+static struct map_desc cpu8815_io_desc[] __initdata = {
+ {
+ .virtual = NOMADIK_UART1_VBASE,
+ .pfn = __phys_to_pfn(NOMADIK_UART1_BASE),
+ .length = SZ_4K,
+ .type = MT_DEVICE,
+ },
+};
+
+static void __init cpu8815_map_io(void)
{
- struct resource resources[] = {
- {
- .start = addr,
- .end = addr + 127,
- .flags = IORESOURCE_MEM,
- },
- {
- .start = irq,
- .end = irq,
- .flags = IORESOURCE_IRQ,
- }
- };
-
- return platform_device_register_resndata(NULL, "gpio", id,
- resources, ARRAY_SIZE(resources),
- pdata, sizeof(*pdata));
+ iotable_init(cpu8815_io_desc, ARRAY_SIZE(cpu8815_io_desc));
}
-void cpu8815_add_gpios(resource_size_t *base, int num, int irq,
- struct nmk_gpio_platform_data *pdata)
+static void cpu8815_restart(char mode, const char *cmd)
{
- int first = 0;
- int i;
+ void __iomem *srcbase = ioremap(NOMADIK_SRC_BASE, SZ_4K);
- for (i = 0; i < num; i++, first += 32, irq++) {
- pdata->first_gpio = first;
- pdata->first_irq = NOMADIK_GPIO_TO_IRQ(first);
- pdata->num_gpio = 32;
+ /* FIXME: use egpio when implemented */
- cpu8815_add_gpio(i, base[i], irq, pdata);
- }
+ /* Write anything to Reset status register */
+ writel(1, srcbase + 0x18);
}
-static inline void
-cpu8815_add_pinctrl(struct device *parent, const char *name)
+/* Initial value for SRC control register: all timers use MXTAL/8 source */
+#define SRC_CR_INIT_MASK 0x00007fff
+#define SRC_CR_INIT_VAL 0x2aaa8000
+
+static void __init cpu8815_timer_init_of(void)
{
- struct platform_device_info pdevinfo = {
- .parent = parent,
- .name = name,
- .id = -1,
- };
+ struct device_node *mtu;
+ void __iomem *base;
+ int irq;
+ u32 src_cr;
+
+ /* We need this to be up now */
+ nomadik_clk_init();
+
+ mtu = of_find_node_by_path("/mtu0");
+ if (!mtu)
+ return;
+ base = of_iomap(mtu, 0);
+ if (WARN_ON(!base))
+ return;
+ irq = irq_of_parse_and_map(mtu, 0);
- platform_device_register_full(&pdevinfo);
+ pr_info("Remapped MTU @ %p, irq: %d\n", base, irq);
+
+ /* Configure timer sources in "system reset controller" ctrl reg */
+ src_cr = readl(base);
+ src_cr &= SRC_CR_INIT_MASK;
+ src_cr |= SRC_CR_INIT_VAL;
+ writel(src_cr, base);
+
+ nmdk_timer_init(base, irq);
}
-static int __init cpu8815_init(void)
+static struct fsmc_nand_timings cpu8815_nand_timings = {
+ .thiz = 0,
+ .thold = 0x10,
+ .twait = 0x0A,
+ .tset = 0,
+};
+
+static struct fsmc_nand_platform_data cpu8815_nand_data = {
+ .nand_timings = &cpu8815_nand_timings,
+};
+
+/*
+ * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects
+ * to simply request an IRQ passed as a resource. So the GPIO pin needs
+ * to be requested by this hog and set as input.
+ */
+static int __init cpu8815_eth_init(void)
{
- struct nmk_gpio_platform_data pdata = {
- /* No custom data yet */
- };
-
- cpu8815_add_gpios(cpu8815_gpio_base, ARRAY_SIZE(cpu8815_gpio_base),
- IRQ_GPIO0, &pdata);
- cpu8815_add_pinctrl(NULL, "pinctrl-stn8815");
- amba_apb_device_add(NULL, "rng", NOMADIK_RNG_BASE, SZ_4K, 0, 0, NULL, 0);
- amba_apb_device_add(NULL, "rtc-pl031", NOMADIK_RTC_BASE, SZ_4K, IRQ_RTC_RTT, 0, NULL, 0);
+ struct device_node *eth;
+ int gpio, irq, err;
+
+ eth = of_find_node_by_path("/usb-s8815/ethernet-gpio");
+ if (!eth) {
+ pr_info("could not find any ethernet GPIO\n");
+ return 0;
+ }
+ gpio = of_get_gpio(eth, 0);
+ err = gpio_request(gpio, "eth_irq");
+ if (err) {
+ pr_info("failed to request ethernet GPIO\n");
+ return -ENODEV;
+ }
+ err = gpio_direction_input(gpio);
+ if (err) {
+ pr_info("failed to set ethernet GPIO as input\n");
+ return -ENODEV;
+ }
+ irq = gpio_to_irq(gpio);
+ pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq);
return 0;
}
-arch_initcall(cpu8815_init);
+device_initcall(cpu8815_eth_init);
-/* All SoC devices live in the same area (see hardware.h) */
-static struct map_desc nomadik_io_desc[] __initdata = {
- {
- .virtual = NOMADIK_IO_VIRTUAL,
- .pfn = __phys_to_pfn(NOMADIK_IO_PHYSICAL),
- .length = NOMADIK_IO_SIZE,
- .type = MT_DEVICE,
- }
- /* static ram and secured ram may be added later */
+/*
+ * TODO:
+ * cannot be set from device tree, convert to a proper DT
+ * binding.
+ */
+static struct mmci_platform_data mmcsd_plat_data = {
+ .ocr_mask = MMC_VDD_29_30,
};
-void __init cpu8815_map_io(void)
+/*
+ * This GPIO pin turns on a line that is used to detect card insertion
+ * on this board.
+ */
+static int __init cpu8815_mmcsd_init(void)
{
- iotable_init(nomadik_io_desc, ARRAY_SIZE(nomadik_io_desc));
-}
+ struct device_node *cdbias;
+ int gpio, err;
-void __init cpu8815_init_irq(void)
-{
- /* This modified VIC cell has two register blocks, at 0 and 0x20 */
- vic_init(io_p2v(NOMADIK_IC_BASE + 0x00), IRQ_VIC_START + 0, ~0, 0);
- vic_init(io_p2v(NOMADIK_IC_BASE + 0x20), IRQ_VIC_START + 32, ~0, 0);
-
- /*
- * Init clocks here so that they are available for system timer
- * initialization.
- */
- nomadik_clk_init();
+ cdbias = of_find_node_by_path("/usb-s8815/mmcsd-gpio");
+ if (!cdbias) {
+ pr_info("could not find MMC/SD card detect bias node\n");
+ return 0;
+ }
+ gpio = of_get_gpio(cdbias, 0);
+ if (gpio < 0) {
+ pr_info("could not obtain MMC/SD card detect bias GPIO\n");
+ return 0;
+ }
+ err = gpio_request(gpio, "card detect bias");
+ if (err) {
+ pr_info("failed to request card detect bias GPIO %d\n", gpio);
+ return -ENODEV;
+ }
+ err = gpio_direction_output(gpio, 0);
+ if (err){
+ pr_info("failed to set GPIO %d as output, low\n", gpio);
+ return err;
+ }
+ pr_info("enabled USB-S8815 CD bias GPIO %d, low\n", gpio);
+ return 0;
}
+device_initcall(cpu8815_mmcsd_init);
-/*
- * This function is called from the board init ("init_machine").
- */
- void __init cpu8815_platform_init(void)
+
+/* These are mostly to get the right device names for the clock lookups */
+static struct of_dev_auxdata cpu8815_auxdata_lookup[] __initdata = {
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO0_BASE,
+ "gpio.0", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO1_BASE,
+ "gpio.1", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO2_BASE,
+ "gpio.2", NULL),
+ OF_DEV_AUXDATA("st,nomadik-gpio", NOMADIK_GPIO3_BASE,
+ "gpio.3", NULL),
+ OF_DEV_AUXDATA("stericsson,nmk-pinctrl-stn8815", 0,
+ "pinctrl-stn8815", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART0_BASE,
+ "uart0", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_UART1_BASE,
+ "uart1", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_RNG_BASE,
+ "rng", NULL),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_RTC_BASE,
+ "rtc-pl031", NULL),
+ OF_DEV_AUXDATA("stericsson,fsmc-nand", NOMADIK_FSMC_BASE,
+ "fsmc-nand", &cpu8815_nand_data),
+ OF_DEV_AUXDATA("arm,primecell", NOMADIK_SDI_BASE,
+ "mmci", &mmcsd_plat_data),
+ { /* sentinel */ },
+};
+
+static void __init cpu8815_init_of(void)
{
#ifdef CONFIG_CACHE_L2X0
/* At full speed latency must be >=2, so 0x249 in low bits */
- l2x0_init(io_p2v(NOMADIK_L2CC_BASE), 0x00730249, 0xfe000fff);
+ l2x0_of_init(0x00730249, 0xfe000fff);
#endif
- return;
+ pinctrl_register_mappings(nhk8815_pinmap, ARRAY_SIZE(nhk8815_pinmap));
+ of_platform_populate(NULL, of_default_bus_match_table,
+ cpu8815_auxdata_lookup, NULL);
}
-void cpu8815_restart(char mode, const char *cmd)
-{
- void __iomem *src_rstsr = io_p2v(NOMADIK_SRC_BASE + 0x18);
-
- /* FIXME: use egpio when implemented */
+static const char * cpu8815_board_compat[] = {
+ "calaosystems,usb-s8815",
+ NULL,
+};
- /* Write anything to Reset status register */
- writel(1, src_rstsr);
-}
+DT_MACHINE_START(NOMADIK_DT, "Nomadik STn8815")
+ .map_io = cpu8815_map_io,
+ .init_irq = irqchip_init,
+ .init_time = cpu8815_timer_init_of,
+ .init_machine = cpu8815_init_of,
+ .restart = cpu8815_restart,
+ .dt_compat = cpu8815_board_compat,
+MACHINE_END
diff --git a/arch/arm/mach-nomadik/cpu-8815.h b/arch/arm/mach-nomadik/cpu-8815.h
deleted file mode 100644
index 71c21e8a11dc..000000000000
--- a/arch/arm/mach-nomadik/cpu-8815.h
+++ /dev/null
@@ -1,4 +0,0 @@
-extern void cpu8815_map_io(void);
-extern void cpu8815_platform_init(void);
-extern void cpu8815_init_irq(void);
-extern void cpu8815_restart(char, const char *);
diff --git a/arch/arm/mach-nomadik/i2c-8815nhk.c b/arch/arm/mach-nomadik/i2c-8815nhk.c
deleted file mode 100644
index 0c2f6628299a..000000000000
--- a/arch/arm/mach-nomadik/i2c-8815nhk.c
+++ /dev/null
@@ -1,88 +0,0 @@
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-bit.h>
-#include <linux/i2c-gpio.h>
-#include <linux/platform_device.h>
-#include <linux/platform_data/pinctrl-nomadik.h>
-
-/*
- * There are two busses in the 8815NHK.
- * They could, in theory, be driven by the hardware component, but we
- * use bit-bang through GPIO by now, to keep things simple
- */
-
-/* I2C0 connected to the STw4811 power management chip */
-static struct i2c_gpio_platform_data nhk8815_i2c_data0 = {
- /* keep defaults for timeouts; pins are push-pull bidirectional */
- .scl_pin = 62,
- .sda_pin = 63,
-};
-
-/* I2C1 connected to various sensors */
-static struct i2c_gpio_platform_data nhk8815_i2c_data1 = {
- /* keep defaults for timeouts; pins are push-pull bidirectional */
- .scl_pin = 53,
- .sda_pin = 54,
-};
-
-/* I2C2 connected to the USB portions of the STw4811 only */
-static struct i2c_gpio_platform_data nhk8815_i2c_data2 = {
- /* keep defaults for timeouts; pins are push-pull bidirectional */
- .scl_pin = 73,
- .sda_pin = 74,
-};
-
-static struct platform_device nhk8815_i2c_dev0 = {
- .name = "i2c-gpio",
- .id = 0,
- .dev = {
- .platform_data = &nhk8815_i2c_data0,
- },
-};
-
-static struct platform_device nhk8815_i2c_dev1 = {
- .name = "i2c-gpio",
- .id = 1,
- .dev = {
- .platform_data = &nhk8815_i2c_data1,
- },
-};
-
-static struct platform_device nhk8815_i2c_dev2 = {
- .name = "i2c-gpio",
- .id = 2,
- .dev = {
- .platform_data = &nhk8815_i2c_data2,
- },
-};
-
-static pin_cfg_t cpu8815_pins_i2c[] = {
- PIN_CFG_INPUT(62, GPIO, PULLUP),
- PIN_CFG_INPUT(63, GPIO, PULLUP),
- PIN_CFG_INPUT(53, GPIO, PULLUP),
- PIN_CFG_INPUT(54, GPIO, PULLUP),
- PIN_CFG_INPUT(73, GPIO, PULLUP),
- PIN_CFG_INPUT(74, GPIO, PULLUP),
-};
-
-static int __init nhk8815_i2c_init(void)
-{
- nmk_config_pins(cpu8815_pins_i2c, ARRAY_SIZE(cpu8815_pins_i2c));
- platform_device_register(&nhk8815_i2c_dev0);
- platform_device_register(&nhk8815_i2c_dev1);
- platform_device_register(&nhk8815_i2c_dev2);
-
- return 0;
-}
-
-static void __exit nhk8815_i2c_exit(void)
-{
- platform_device_unregister(&nhk8815_i2c_dev0);
- platform_device_unregister(&nhk8815_i2c_dev1);
- platform_device_unregister(&nhk8815_i2c_dev2);
- return;
-}
-
-module_init(nhk8815_i2c_init);
-module_exit(nhk8815_i2c_exit);
diff --git a/arch/arm/mach-nomadik/include/mach/hardware.h b/arch/arm/mach-nomadik/include/mach/hardware.h
deleted file mode 100644
index 02035e459f50..000000000000
--- a/arch/arm/mach-nomadik/include/mach/hardware.h
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- * This file contains the hardware definitions of the Nomadik.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * YOU should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-/* Nomadik registers live from 0x1000.0000 to 0x1023.0000 -- currently */
-#define NOMADIK_IO_VIRTUAL 0xF0000000 /* VA of IO */
-#define NOMADIK_IO_PHYSICAL 0x10000000 /* PA of IO */
-#define NOMADIK_IO_SIZE 0x00300000 /* 3MB for all regs */
-
-/* used in C code, so cast to proper type */
-#define io_p2v(x) ((void __iomem *)(x) \
- - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-#define io_v2p(x) ((unsigned long)(x) \
- - NOMADIK_IO_VIRTUAL + NOMADIK_IO_PHYSICAL)
-
-/* used in asm code, so no casts */
-#define IO_ADDRESS(x) IOMEM((x) - NOMADIK_IO_PHYSICAL + NOMADIK_IO_VIRTUAL)
-
-/*
- * Base address defination for Nomadik Onchip Logic Block
- */
-#define NOMADIK_FSMC_BASE 0x10100000 /* FSMC registers */
-#define NOMADIK_SDRAMC_BASE 0x10110000 /* SDRAM Controller */
-#define NOMADIK_CLCDC_BASE 0x10120000 /* CLCD Controller */
-#define NOMADIK_MDIF_BASE 0x10120000 /* MDIF */
-#define NOMADIK_DMA0_BASE 0x10130000 /* DMA0 Controller */
-#define NOMADIK_IC_BASE 0x10140000 /* Vectored Irq Controller */
-#define NOMADIK_DMA1_BASE 0x10150000 /* DMA1 Controller */
-#define NOMADIK_USB_BASE 0x10170000 /* USB-OTG conf reg base */
-#define NOMADIK_CRYP_BASE 0x10180000 /* Crypto processor */
-#define NOMADIK_SHA1_BASE 0x10190000 /* SHA-1 Processor */
-#define NOMADIK_XTI_BASE 0x101A0000 /* XTI */
-#define NOMADIK_RNG_BASE 0x101B0000 /* Random number generator */
-#define NOMADIK_SRC_BASE 0x101E0000 /* SRC base */
-#define NOMADIK_WDOG_BASE 0x101E1000 /* Watchdog */
-#define NOMADIK_MTU0_BASE 0x101E2000 /* Multiple Timer 0 */
-#define NOMADIK_MTU1_BASE 0x101E3000 /* Multiple Timer 1 */
-#define NOMADIK_GPIO0_BASE 0x101E4000 /* GPIO0 */
-#define NOMADIK_GPIO1_BASE 0x101E5000 /* GPIO1 */
-#define NOMADIK_GPIO2_BASE 0x101E6000 /* GPIO2 */
-#define NOMADIK_GPIO3_BASE 0x101E7000 /* GPIO3 */
-#define NOMADIK_RTC_BASE 0x101E8000 /* Real Time Clock base */
-#define NOMADIK_PMU_BASE 0x101E9000 /* Power Management Unit */
-#define NOMADIK_OWM_BASE 0x101EA000 /* One wire master */
-#define NOMADIK_SCR_BASE 0x101EF000 /* Secure Control registers */
-#define NOMADIK_MSP2_BASE 0x101F0000 /* MSP 2 interface */
-#define NOMADIK_MSP1_BASE 0x101F1000 /* MSP 1 interface */
-#define NOMADIK_UART2_BASE 0x101F2000 /* UART 2 interface */
-#define NOMADIK_SSIRx_BASE 0x101F3000 /* SSI 8-ch rx interface */
-#define NOMADIK_SSITx_BASE 0x101F4000 /* SSI 8-ch tx interface */
-#define NOMADIK_MSHC_BASE 0x101F5000 /* Memory Stick(Pro) Host */
-#define NOMADIK_SDI_BASE 0x101F6000 /* SD-card/MM-Card */
-#define NOMADIK_I2C1_BASE 0x101F7000 /* I2C1 interface */
-#define NOMADIK_I2C0_BASE 0x101F8000 /* I2C0 interface */
-#define NOMADIK_MSP0_BASE 0x101F9000 /* MSP 0 interface */
-#define NOMADIK_FIRDA_BASE 0x101FA000 /* FIrDA interface */
-#define NOMADIK_UART1_BASE 0x101FB000 /* UART 1 interface */
-#define NOMADIK_SSP_BASE 0x101FC000 /* SSP interface */
-#define NOMADIK_UART0_BASE 0x101FD000 /* UART 0 interface */
-#define NOMADIK_SGA_BASE 0x101FE000 /* SGA interface */
-#define NOMADIK_L2CC_BASE 0x10210000 /* L2 Cache controller */
-
-/* Other ranges, not for p2v/v2p */
-#define NOMADIK_BACKUP_RAM 0x80010000
-#define NOMADIK_EBROM 0x80000000 /* Embedded boot ROM */
-#define NOMADIK_HAMACV_DMEM_BASE 0xA0100000 /* HAMACV Data Memory Start */
-#define NOMADIK_HAMACV_DMEM_END 0xA01FFFFF /* HAMACV Data Memory End */
-#define NOMADIK_HAMACA_DMEM 0xA0200000 /* HAMACA Data Memory Space */
-
-#define NOMADIK_FSMC_VA IO_ADDRESS(NOMADIK_FSMC_BASE)
-#define NOMADIK_MTU0_VA IO_ADDRESS(NOMADIK_MTU0_BASE)
-#define NOMADIK_MTU1_VA IO_ADDRESS(NOMADIK_MTU1_BASE)
-
-#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-nomadik/include/mach/irqs.h b/arch/arm/mach-nomadik/include/mach/irqs.h
index 215f8cdb4004..90ac965a92fe 100644
--- a/arch/arm/mach-nomadik/include/mach/irqs.h
+++ b/arch/arm/mach-nomadik/include/mach/irqs.h
@@ -20,8 +20,6 @@
#ifndef __ASM_ARCH_IRQS_H
#define __ASM_ARCH_IRQS_H
-#include <mach/hardware.h>
-
#define IRQ_VIC_START 32 /* first VIC interrupt is 1 */
/*
diff --git a/arch/arm/mach-nomadik/include/mach/uncompress.h b/arch/arm/mach-nomadik/include/mach/uncompress.h
index f527af6527c8..106fccca2021 100644
--- a/arch/arm/mach-nomadik/include/mach/uncompress.h
+++ b/arch/arm/mach-nomadik/include/mach/uncompress.h
@@ -21,7 +21,6 @@
#include <asm/setup.h>
#include <asm/io.h>
-#include <mach/hardware.h>
/* we need the constants in amba/serial.h, but it refers to amba_device */
struct amba_device;