diff options
| author | Robert Nelson <robertcnelson@gmail.com> | 2010-09-23 18:22:48 -0700 |
|---|---|---|
| committer | Tony Lindgren <tony@atomide.com> | 2010-09-23 18:22:48 -0700 |
| commit | e4916e117a4fcd001a1be777e406ec1f98b75de4 (patch) | |
| tree | fcc114930da122236100c656de2cad4f2e6571b4 /arch/arm/mach-omap2/board-omap3beagle.c | |
| parent | 954bed046fe57724851879a9db813eecb1d15f55 (diff) | |
omap: Beagle: only Cx boards use pin 23 for write protect
system_rev comes from u-boot and is a constant 0x20, so
Bx boards also fall in this 'if' and will get setup with the
wrong gpio_wp pin. Switch to using the Beagle revision routine
to correcly set pin 23 only for C1/2/3 and C4 Boards. Bx boards
will then use the correct default pin setting.
Signed-off-by: Robert Nelson <robertcnelson@gmail.com>
Acked-by: Jarkko Nikula <jhnikula@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Diffstat (limited to 'arch/arm/mach-omap2/board-omap3beagle.c')
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 1aebb3f4f20a..1908b338e8d2 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -272,7 +272,8 @@ static struct gpio_led gpio_leds[]; static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { - if (system_rev >= 0x20 && system_rev <= 0x34301000) { + if ((omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C1_3) || + (omap3_beagle_get_rev() == OMAP3BEAGLE_BOARD_C4)) { omap_mux_init_gpio(23, OMAP_PIN_INPUT); mmc[0].gpio_wp = 23; } else { |