diff options
| author | Lars-Peter Clausen <lars@metafoo.de> | 2011-03-07 08:42:00 +0100 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2011-03-07 12:23:22 -0800 |
| commit | e27c3c5c7e0fb107990c7f465a3525312f6d45aa (patch) | |
| tree | 697835d843f1310cc670511ad078e1ddd305f0ec /arch/arm/mach-s3c2440/mach-mini2440.c | |
| parent | a74022a55e44fe2044ac3660452cafecb300aece (diff) | |
ARM: s3c24xx: Switch to common GPIO controlled UDC pullup implementation
Currently all boards using the s3c2410_udc driver use a GPIO to control the
state of the pullup, as a result the same code is reimplemented in each board
This patch changes these boards to use the common implementation for GPIO
controlled pullup in the UDC driver.
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Acked-by: Vasily Khoruzhick <anarsoul@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'arch/arm/mach-s3c2440/mach-mini2440.c')
| -rw-r--r-- | arch/arm/mach-s3c2440/mach-mini2440.c | 24 |
1 files changed, 1 insertions, 23 deletions
diff --git a/arch/arm/mach-s3c2440/mach-mini2440.c b/arch/arm/mach-s3c2440/mach-mini2440.c index f62bb4c793bd..d80f129bca94 100644 --- a/arch/arm/mach-s3c2440/mach-mini2440.c +++ b/arch/arm/mach-s3c2440/mach-mini2440.c @@ -97,26 +97,8 @@ static struct s3c2410_uartcfg mini2440_uartcfgs[] __initdata = { /* USB device UDC support */ -static void mini2440_udc_pullup(enum s3c2410_udc_cmd_e cmd) -{ - pr_debug("udc: pullup(%d)\n", cmd); - - switch (cmd) { - case S3C2410_UDC_P_ENABLE : - gpio_set_value(S3C2410_GPC(5), 1); - break; - case S3C2410_UDC_P_DISABLE : - gpio_set_value(S3C2410_GPC(5), 0); - break; - case S3C2410_UDC_P_RESET : - break; - default: - break; - } -} - static struct s3c2410_udc_mach_info mini2440_udc_cfg __initdata = { - .udc_command = mini2440_udc_pullup, + .pullup_pin = S3C2410_GPC(5), }; @@ -644,10 +626,6 @@ static void __init mini2440_init(void) s3c2410_gpio_setpin(S3C2410_GPB(1), 0); s3c_gpio_cfgpin(S3C2410_GPB(1), S3C2410_GPIO_INPUT); - /* Make sure the D+ pullup pin is output */ - WARN_ON(gpio_request(S3C2410_GPC(5), "udc pup")); - gpio_direction_output(S3C2410_GPC(5), 0); - /* mark the key as input, without pullups (there is one on the board) */ for (i = 0; i < ARRAY_SIZE(mini2440_buttons); i++) { s3c_gpio_setpull(mini2440_buttons[i].gpio, S3C_GPIO_PULL_UP); |