summaryrefslogtreecommitdiff
path: root/arch/arm/plat-omap/fb.c
diff options
context:
space:
mode:
authorImre Deak <imre.deak@solidboot.com>2007-03-06 03:16:36 -0800
committerRussell King <rmk+kernel@arm.linux.org.uk>2007-05-09 10:39:14 +0100
commitb7cc6d46b4f8157bfc58a6ed143ffa83575e236a (patch)
tree107a080740734d99d32ee92372fd7a9c6de538f6 /arch/arm/plat-omap/fb.c
parentb01d96d653b1387ee0a91094ee54a8c523c3be09 (diff)
ARM: OMAP: FB sync with N800 tree (support for dynamic SRAM allocations)
- in addition to fixed FB regions - as passed by the bootloader - allow dynamic allocations - do some more checking against overlapping / reserved regions - move the FB specific parts out from sram.c to fb.c Signed-off-by: Imre Deak <imre.deak@solidboot.com> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/plat-omap/fb.c')
-rw-r--r--arch/arm/plat-omap/fb.c277
1 files changed, 247 insertions, 30 deletions
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index a302d9194f57..469f580ca057 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -39,6 +39,8 @@
#if defined(CONFIG_FB_OMAP) || defined(CONFIG_FB_OMAP_MODULE)
static struct omapfb_platform_data omapfb_config;
+static int config_invalid;
+static int configured_regions;
static u64 omap_fb_dma_mask = ~(u32)0;
@@ -53,46 +55,246 @@ static struct platform_device omap_fb_device = {
.num_resources = 0,
};
-/* called from map_io */
-void omapfb_reserve_mem(void)
+static inline int ranges_overlap(unsigned long start1, unsigned long size1,
+ unsigned long start2, unsigned long size2)
{
- const struct omap_fbmem_config *fbmem_conf;
- unsigned long total_size;
+ return (start1 >= start2 && start1 < start2 + size2) ||
+ (start2 >= start1 && start2 < start1 + size1);
+}
+
+static inline int range_included(unsigned long start1, unsigned long size1,
+ unsigned long start2, unsigned long size2)
+{
+ return start1 >= start2 && start1 + size1 <= start2 + size2;
+}
+
+
+/* Check if there is an overlapping region. */
+static int fbmem_region_reserved(unsigned long start, size_t size)
+{
+ struct omapfb_mem_region *rg;
int i;
- if (!omap_fb_sram_valid) {
- /* FBMEM SRAM configuration was already found to be invalid.
- * Ignore the whole configuration block. */
- omapfb_config.mem_desc.region_cnt = 0;
- return;
+ rg = &omapfb_config.mem_desc.region[0];
+ for (i = 0; i < OMAPFB_PLANE_NUM; i++, rg++) {
+ if (!rg->paddr)
+ /* Empty slot. */
+ continue;
+ if (ranges_overlap(start, size, rg->paddr, rg->size))
+ return 1;
}
+ return 0;
+}
- i = 0;
- total_size = 0;
- while ((fbmem_conf = omap_get_nr_config(OMAP_TAG_FBMEM,
- struct omap_fbmem_config, i)) != NULL) {
- unsigned long start;
- unsigned long size;
+/*
+ * Get the region_idx`th region from board config/ATAG and convert it to
+ * our internal format.
+ */
+static int get_fbmem_region(int region_idx, struct omapfb_mem_region *rg)
+{
+ const struct omap_fbmem_config *conf;
+ u32 paddr;
- if (i == OMAPFB_PLANE_NUM) {
- printk(KERN_ERR "ignoring extra plane info\n");
+ conf = omap_get_nr_config(OMAP_TAG_FBMEM,
+ struct omap_fbmem_config, region_idx);
+ if (conf == NULL)
+ return -ENOENT;
+
+ paddr = conf->start;
+ /*
+ * Low bits encode the page allocation mode, if high bits
+ * are zero. Otherwise we need a page aligned fixed
+ * address.
+ */
+ memset(rg, 0, sizeof(*rg));
+ rg->type = paddr & ~PAGE_MASK;
+ rg->paddr = paddr & PAGE_MASK;
+ rg->size = PAGE_ALIGN(conf->size);
+ return 0;
+}
+
+static int set_fbmem_region_type(struct omapfb_mem_region *rg, int mem_type,
+ unsigned long mem_start,
+ unsigned long mem_size)
+{
+ /*
+ * Check if the configuration specifies the type explicitly.
+ * type = 0 && paddr = 0, a default don't care case maps to
+ * the SDRAM type.
+ */
+ if (rg->type || (!rg->type && !rg->paddr))
+ return 0;
+ if (ranges_overlap(rg->paddr, rg->size, mem_start, mem_size)) {
+ rg->type = mem_type;
+ return 0;
+ }
+ /* Can't determine it. */
+ return -1;
+}
+
+static int check_fbmem_region(int region_idx, struct omapfb_mem_region *rg,
+ unsigned long start_avail, unsigned size_avail)
+{
+ unsigned long paddr = rg->paddr;
+ size_t size = rg->size;
+
+ if (rg->type > OMAPFB_MEMTYPE_MAX) {
+ printk(KERN_ERR
+ "Invalid start address for FB region %d\n", region_idx);
+ return -EINVAL;
+ }
+
+ if (!rg->size) {
+ printk(KERN_ERR "Zero size for FB region %d\n", region_idx);
+ return -EINVAL;
+ }
+
+ if (!paddr)
+ /* Allocate this dynamically, leave paddr 0 for now. */
+ return 0;
+
+ /*
+ * Fixed region for the given RAM range. Check if it's already
+ * reserved by the FB code or someone else.
+ */
+ if (fbmem_region_reserved(paddr, size) ||
+ !range_included(paddr, size, start_avail, size_avail)) {
+ printk(KERN_ERR "Trying to use reserved memory "
+ "for FB region %d\n", region_idx);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+/*
+ * Called from map_io. We need to call to this early enough so that we
+ * can reserve the fixed SDRAM regions before VM could get hold of them.
+ */
+void omapfb_reserve_sdram(void)
+{
+ struct bootmem_data *bdata;
+ unsigned long sdram_start, sdram_size;
+ unsigned long reserved;
+ int i;
+
+ if (config_invalid)
+ return;
+
+ bdata = NODE_DATA(0)->bdata;
+ sdram_start = bdata->node_boot_start;
+ sdram_size = (bdata->node_low_pfn << PAGE_SHIFT) - sdram_start;
+ reserved = 0;
+ for (i = 0; ; i++) {
+ struct omapfb_mem_region rg;
+
+ if (get_fbmem_region(i, &rg) < 0)
break;
+ if (i == OMAPFB_PLANE_NUM) {
+ printk(KERN_ERR
+ "Extraneous FB mem configuration entries\n");
+ config_invalid = 1;
+ return;
}
- start = fbmem_conf->start;
- size = fbmem_conf->size;
- omapfb_config.mem_desc.region[i].paddr = start;
- omapfb_config.mem_desc.region[i].size = size;
- if (omap_fb_sram_plane != i && start) {
- reserve_bootmem(start, size);
- total_size += size;
+ /* Check if it's our memory type. */
+ if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SDRAM,
+ sdram_start, sdram_size) < 0 ||
+ (rg.type != OMAPFB_MEMTYPE_SDRAM))
+ continue;
+ BUG_ON(omapfb_config.mem_desc.region[i].size);
+ if (check_fbmem_region(i, &rg, sdram_start, sdram_size) < 0) {
+ config_invalid = 1;
+ return;
}
- i++;
+ if (rg.paddr)
+ reserve_bootmem(rg.paddr, rg.size);
+ reserved += rg.size;
+ omapfb_config.mem_desc.region[i] = rg;
+ configured_regions++;
}
omapfb_config.mem_desc.region_cnt = i;
- if (total_size)
+ if (reserved)
pr_info("Reserving %lu bytes SDRAM for frame buffer\n",
- total_size);
+ reserved);
+}
+
+/*
+ * Called at sram init time, before anything is pushed to the SRAM stack.
+ * Because of the stack scheme, we will allocate everything from the
+ * start of the lowest address region to the end of SRAM. This will also
+ * include padding for page alignment and possible holes between regions.
+ *
+ * As opposed to the SDRAM case, we'll also do any dynamic allocations at
+ * this point, since the driver built as a module would have problem with
+ * freeing / reallocating the regions.
+ */
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+ unsigned long sram_vstart,
+ unsigned long sram_size,
+ unsigned long pstart_avail,
+ unsigned long size_avail)
+{
+ struct omapfb_mem_region rg;
+ unsigned long pend_avail;
+ unsigned long reserved;
+ int i;
+
+ if (config_invalid)
+ return 0;
+
+ reserved = 0;
+ pend_avail = pstart_avail + size_avail;
+ for (i = 0; ; i++) {
+ if (get_fbmem_region(i, &rg) < 0)
+ break;
+ if (i == OMAPFB_PLANE_NUM) {
+ printk(KERN_ERR
+ "Extraneous FB mem configuration entries\n");
+ config_invalid = 1;
+ return 0;
+ }
+ /* Check if it's our memory type. */
+ if (set_fbmem_region_type(&rg, OMAPFB_MEMTYPE_SRAM,
+ sram_pstart, sram_size) < 0 ||
+ (rg.type != OMAPFB_MEMTYPE_SRAM))
+ continue;
+ BUG_ON(omapfb_config.mem_desc.region[i].size);
+
+ if (check_fbmem_region(i, &rg, pstart_avail, size_avail) < 0) {
+ config_invalid = 1;
+ return 0;
+ }
+
+ if (!rg.paddr) {
+ /* Dynamic allocation */
+ if ((size_avail & PAGE_MASK) < rg.size) {
+ printk("Not enough SRAM for FB region %d\n",
+ i);
+ config_invalid = 1;
+ return 0;
+ }
+ size_avail = (size_avail - rg.size) & PAGE_MASK;
+ rg.paddr = pstart_avail + size_avail;
+ }
+ /* Reserve everything above the start of the region. */
+ if (pend_avail - rg.paddr > reserved)
+ reserved = pend_avail - rg.paddr;
+ size_avail = pend_avail - reserved - pstart_avail;
+
+ /*
+ * We have a kernel mapping for this already, so the
+ * driver won't have to make one.
+ */
+ rg.vaddr = (void *)(sram_vstart + rg.paddr - sram_pstart);
+ omapfb_config.mem_desc.region[i] = rg;
+ configured_regions++;
+ }
+ omapfb_config.mem_desc.region_cnt = i;
+ if (reserved)
+ pr_info("Reserving %lu bytes SRAM for frame buffer\n",
+ reserved);
+ return reserved;
}
void omapfb_set_ctrl_platform_data(void *data)
@@ -104,10 +306,19 @@ static inline int omap_init_fb(void)
{
const struct omap_lcd_config *conf;
+ if (config_invalid)
+ return 0;
+ if (configured_regions != omapfb_config.mem_desc.region_cnt) {
+ printk(KERN_ERR "Invalid FB mem configuration entries\n");
+ return 0;
+ }
conf = omap_get_config(OMAP_TAG_LCD, struct omap_lcd_config);
- if (conf == NULL)
+ if (conf == NULL) {
+ if (configured_regions)
+ /* FB mem config, but no LCD config? */
+ printk(KERN_ERR "Missing LCD configuration\n");
return 0;
-
+ }
omapfb_config.lcd = *conf;
return platform_device_register(&omap_fb_device);
@@ -117,7 +328,13 @@ arch_initcall(omap_init_fb);
#else
-void omapfb_reserve_mem(void) {}
+void omapfb_reserve_sdram(void) {}
+unsigned long omapfb_reserve_sram(unsigned long sram_pstart,
+ unsigned long sram_vstart,
+ unsigned long sram_size,
+ unsigned long start_avail,
+ unsigned long size_avail) {}
+
#endif