diff options
author | Philippe Schenker <philippe.schenker@toradex.com> | 2021-12-23 11:06:15 +0100 |
---|---|---|
committer | Marcel Ziswiler <marcel.ziswiler@toradex.com> | 2022-01-03 16:45:59 +0100 |
commit | aaa25d77e389781a512898130b3c90fdb0b66a0f (patch) | |
tree | e557fb8d28bdd28f4702c932baa9ec094645ef90 /arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | |
parent | c6cd9677dbcd514ff4d4c3ecbcf10ea91eaaefae (diff) |
arm64: dts: imx8x-colibri: mark usdhc2 with no-1-8-v
The original Colibri family module standard never supported switching
the SD card interface to 1.8 volt signalling. And as all former carrier
boards do have 3.3 volt pull-up resistors on the command- and data-lines
of SD-signals this is also not compatible with all UHS modes. Mark this
module as not compatible with 1.8 volt signalling with the no-1-8-v tag.
Should you be lucky and have a custom carrier board or Iris v2 which
does not have such 3.3 volt pull-ups (or you removed yours) one may
explicitly delete this property again.
While at it also alphabetically re-order them usdhc2 properties.
Signed-off-by: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Diffstat (limited to 'arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi')
-rw-r--r-- | arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi index 5e5e057ab4c2..c479f219e712 100644 --- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi +++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi @@ -1431,12 +1431,13 @@ &usdhc2 { bus-width = <4>; cd-gpios = <&lsio_gpio3 9 GPIO_ACTIVE_LOW>; + disable-wp; + no-1-8-v; pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep"; pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>; pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>; pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>; pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>; - disable-wp; vmmc-supply = <®_module_3v3>; }; |