diff options
| author | Andrew Lunn <andrew@lunn.ch> | 2017-03-08 03:50:12 +0100 |
|---|---|---|
| committer | Shawn Guo <shawnguo@kernel.org> | 2017-04-10 16:16:05 +0800 |
| commit | 51dab7d9a28809c7d1ae6897e16c4cbb71a81fde (patch) | |
| tree | 401c9c4f83526b734dd5d8554c9f2e8ba5548132 /arch/arm | |
| parent | e3abb14e81cfabdb3820557e1b4a478e1bafdce9 (diff) | |
ARM: dts: vf610-zii-dev: Wire up devel C switch interrupts
The devel B and devel C board use the same GPIO lines for interrupts
from the two switches. Move the pinmux nodes from devel B into the
shared .dtsi file, and wire up the interrupts on devel C.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Diffstat (limited to 'arch/arm')
| -rw-r--r-- | arch/arm/boot/dts/vf610-zii-dev-rev-b.dts | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/vf610-zii-dev-rev-c.dts | 12 | ||||
| -rw-r--r-- | arch/arm/boot/dts/vf610-zii-dev.dtsi | 12 |
3 files changed, 24 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts index 7940408838df..dd2f2b9907ff 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-b.dts @@ -459,18 +459,6 @@ >; }; - pinctrl_gpio_switch0: pinctrl-gpio-switch0 { - fsl,pins = < - VF610_PAD_PTB5__GPIO_27 0x219d - >; - }; - - pinctrl_gpio_switch1: pinctrl-gpio-switch1 { - fsl,pins = < - VF610_PAD_PTB4__GPIO_26 0x219d - >; - }; - pinctrl_mdio_mux: pinctrl-mdio-mux { fsl,pins = < VF610_PAD_PTA18__GPIO_8 0x31c2 diff --git a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts index 6a45bd24ffe6..352ecec64bb7 100644 --- a/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts +++ b/arch/arm/boot/dts/vf610-zii-dev-rev-c.dts @@ -67,11 +67,17 @@ switch0: switch@0 { compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch0>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 0>; eeprom-length = <512>; + interrupt-parent = <&gpio0>; + interrupts = <27 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; @@ -125,11 +131,17 @@ switch1: switch@0 { compatible = "marvell,mv88e6190"; + pinctrl-0 = <&pinctrl_gpio_switch1>; + pinctrl-names = "default"; #address-cells = <1>; #size-cells = <0>; reg = <0>; dsa,member = <0 1>; eeprom-length = <512>; + interrupt-parent = <&gpio0>; + interrupts = <26 IRQ_TYPE_LEVEL_LOW>; + interrupt-controller; + #interrupt-cells = <2>; ports { #address-cells = <1>; diff --git a/arch/arm/boot/dts/vf610-zii-dev.dtsi b/arch/arm/boot/dts/vf610-zii-dev.dtsi index ca9e1bc35e45..6b58d3a97992 100644 --- a/arch/arm/boot/dts/vf610-zii-dev.dtsi +++ b/arch/arm/boot/dts/vf610-zii-dev.dtsi @@ -296,6 +296,18 @@ >; }; + pinctrl_gpio_switch0: pinctrl-gpio-switch0 { + fsl,pins = < + VF610_PAD_PTB5__GPIO_27 0x219d + >; + }; + + pinctrl_gpio_switch1: pinctrl-gpio-switch1 { + fsl,pins = < + VF610_PAD_PTB4__GPIO_26 0x219d + >; + }; + pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset { fsl,pins = < VF610_PAD_PTE14__GPIO_119 0x31c2 |