MN10300: And Panasonic AM34 subarch and implement SMP

Implement the Panasonic MN10300 AM34 CPU subarch and implement SMP support for
MN10300.  Also implement support for the MN2WS0060 processor and the ASB2364
evaluation board which are AM34 based.

Signed-off-by: Akira Takeuchi <takeuchi.akr@jp.panasonic.com>
Signed-off-by: Kiyoshi Owada <owada.kiyoshi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>

1 files changed, 181 insertions, 29 deletions

diff --git a/arch/mn10300/kernel/mn10300-serial.c b/arch/mn10300/kernel/mn10300-serial.c
index db509dd80565..996384dba45d 100644
--- a/arch/mn10300/kernel/mn10300-serial.c
+++ b/arch/mn10300/kernel/mn10300-serial.c
@@ -44,6 +44,11 @@ static const char serial_revdate[] = "2007-11-06";
 #include <unit/timex.h>
 #include "mn10300-serial.h"
 
+#ifdef CONFIG_SMP
+#undef  GxICR
+#define GxICR(X) CROSS_GxICR(X, 0)
+#endif /* CONFIG_SMP */
+
 #define kenter(FMT, ...) \
 	printk(KERN_DEBUG "-->%s(" FMT ")\n", __func__, ##__VA_ARGS__)
 #define _enter(FMT, ...) \
@@ -57,6 +62,11 @@ static const char serial_revdate[] = "2007-11-06";
 #define _proto(FMT, ...) \
 	no_printk(KERN_DEBUG "### MNSERIAL " FMT " ###\n", ##__VA_ARGS__)
 
+#ifndef CODMSB
+/* c_cflag bit meaning */
+#define CODMSB	004000000000	/* change Transfer bit-order */
+#endif
+
 #define NR_UARTS 3
 
 #ifdef CONFIG_MN10300_TTYSM_CONSOLE
@@ -152,26 +162,35 @@ struct mn10300_serial_port mn10300_serial_port_sif0 = {
 	.name		= "ttySM0",
 	._iobase	= &SC0CTR,
 	._control	= &SC0CTR,
-	._status	= (volatile u8 *) &SC0STR,
+	._status	= (volatile u8 *)&SC0STR,
 	._intr		= &SC0ICR,
 	._rxb		= &SC0RXB,
 	._txb		= &SC0TXB,
 	.rx_name	= "ttySM0:Rx",
 	.tx_name	= "ttySM0:Tx",
-#ifdef CONFIG_MN10300_TTYSM0_TIMER8
+#if defined(CONFIG_MN10300_TTYSM0_TIMER8)
 	.tm_name	= "ttySM0:Timer8",
 	._tmxmd		= &TM8MD,
 	._tmxbr		= &TM8BR,
 	._tmicr		= &TM8ICR,
 	.tm_irq		= TM8IRQ,
 	.div_timer	= MNSCx_DIV_TIMER_16BIT,
-#else /* CONFIG_MN10300_TTYSM0_TIMER2 */
+#elif defined(CONFIG_MN10300_TTYSM0_TIMER0)
+	.tm_name	= "ttySM0:Timer0",
+	._tmxmd		= &TM0MD,
+	._tmxbr		= (volatile u16 *)&TM0BR,
+	._tmicr		= &TM0ICR,
+	.tm_irq		= TM0IRQ,
+	.div_timer	= MNSCx_DIV_TIMER_8BIT,
+#elif defined(CONFIG_MN10300_TTYSM0_TIMER2)
 	.tm_name	= "ttySM0:Timer2",
 	._tmxmd		= &TM2MD,
-	._tmxbr		= (volatile u16 *) &TM2BR,
+	._tmxbr		= (volatile u16 *)&TM2BR,
 	._tmicr		= &TM2ICR,
 	.tm_irq		= TM2IRQ,
 	.div_timer	= MNSCx_DIV_TIMER_8BIT,
+#else
+#error "Unknown config for ttySM0"
 #endif
 	.rx_irq		= SC0RXIRQ,
 	.tx_irq		= SC0TXIRQ,
@@ -205,26 +224,35 @@ struct mn10300_serial_port mn10300_serial_port_sif1 = {
 	.name		= "ttySM1",
 	._iobase	= &SC1CTR,
 	._control	= &SC1CTR,
-	._status	= (volatile u8 *) &SC1STR,
+	._status	= (volatile u8 *)&SC1STR,
 	._intr		= &SC1ICR,
 	._rxb		= &SC1RXB,
 	._txb		= &SC1TXB,
 	.rx_name	= "ttySM1:Rx",
 	.tx_name	= "ttySM1:Tx",
-#ifdef CONFIG_MN10300_TTYSM1_TIMER9
+#if defined(CONFIG_MN10300_TTYSM1_TIMER9)
 	.tm_name	= "ttySM1:Timer9",
 	._tmxmd		= &TM9MD,
 	._tmxbr		= &TM9BR,
 	._tmicr		= &TM9ICR,
 	.tm_irq		= TM9IRQ,
 	.div_timer	= MNSCx_DIV_TIMER_16BIT,
-#else /* CONFIG_MN10300_TTYSM1_TIMER3 */
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
 	.tm_name	= "ttySM1:Timer3",
 	._tmxmd		= &TM3MD,
-	._tmxbr		= (volatile u16 *) &TM3BR,
+	._tmxbr		= (volatile u16 *)&TM3BR,
 	._tmicr		= &TM3ICR,
 	.tm_irq		= TM3IRQ,
 	.div_timer	= MNSCx_DIV_TIMER_8BIT,
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER12)
+	.tm_name	= "ttySM1/Timer12",
+	._tmxmd		= &TM12MD,
+	._tmxbr		= &TM12BR,
+	._tmicr		= &TM12ICR,
+	.tm_irq		= TM12IRQ,
+	.div_timer	= MNSCx_DIV_TIMER_16BIT,
+#else
+#error "Unknown config for ttySM1"
 #endif
 	.rx_irq		= SC1RXIRQ,
 	.tx_irq		= SC1TXIRQ,
@@ -260,20 +288,45 @@ struct mn10300_serial_port mn10300_serial_port_sif2 = {
 	.uart.lock	=
 	__SPIN_LOCK_UNLOCKED(mn10300_serial_port_sif2.uart.lock),
 	.name		= "ttySM2",
-	.rx_name	= "ttySM2:Rx",
-	.tx_name	= "ttySM2:Tx",
-	.tm_name	= "ttySM2:Timer10",
 	._iobase	= &SC2CTR,
 	._control	= &SC2CTR,
-	._status	= &SC2STR,
+	._status	= (volatile u8 *)&SC2STR,
 	._intr		= &SC2ICR,
 	._rxb		= &SC2RXB,
 	._txb		= &SC2TXB,
+	.rx_name	= "ttySM2:Rx",
+	.tx_name	= "ttySM2:Tx",
+#if defined(CONFIG_MN10300_TTYSM2_TIMER10)
+	.tm_name	= "ttySM2/Timer10",
 	._tmxmd		= &TM10MD,
 	._tmxbr		= &TM10BR,
 	._tmicr		= &TM10ICR,
 	.tm_irq		= TM10IRQ,
 	.div_timer	= MNSCx_DIV_TIMER_16BIT,
+#elif defined(CONFIG_MN10300_TTYSM2_TIMER9)
+	.tm_name	= "ttySM2/Timer9",
+	._tmxmd		= &TM9MD,
+	._tmxbr		= &TM9BR,
+	._tmicr		= &TM9ICR,
+	.tm_irq		= TM9IRQ,
+	.div_timer	= MNSCx_DIV_TIMER_16BIT,
+#elif defined(CONFIG_MN10300_TTYSM2_TIMER1)
+	.tm_name	= "ttySM2/Timer1",
+	._tmxmd		= &TM1MD,
+	._tmxbr		= (volatile u16 *)&TM1BR,
+	._tmicr		= &TM1ICR,
+	.tm_irq		= TM1IRQ,
+	.div_timer	= MNSCx_DIV_TIMER_8BIT,
+#elif defined(CONFIG_MN10300_TTYSM2_TIMER3)
+	.tm_name	= "ttySM2/Timer3",
+	._tmxmd		= &TM3MD,
+	._tmxbr		= (volatile u16 *)&TM3BR,
+	._tmicr		= &TM3ICR,
+	.tm_irq		= TM3IRQ,
+	.div_timer	= MNSCx_DIV_TIMER_8BIT,
+#else
+#error "Unknown config for ttySM2"
+#endif
 	.rx_irq		= SC2RXIRQ,
 	.tx_irq		= SC2TXIRQ,
 	.rx_icr		= &GxICR(SC2RXIRQ),
@@ -322,9 +375,13 @@ struct mn10300_serial_port *mn10300_serial_ports[NR_UARTS + 1] = {
  */
 static void mn10300_serial_mask_ack(unsigned int irq)
 {
+	unsigned long flags;
 	u16 tmp;
+
+	flags = arch_local_cli_save();
 	GxICR(irq) = GxICR_LEVEL_6;
 	tmp = GxICR(irq); /* flush write buffer */
+	arch_local_irq_restore(flags);
 }
 
 static void mn10300_serial_nop(unsigned int irq)
@@ -348,23 +405,36 @@ struct mn10300_serial_int mn10300_serial_int_tbl[NR_IRQS];
 
 static void mn10300_serial_dis_tx_intr(struct mn10300_serial_port *port)
 {
+	unsigned long flags;
 	u16 x;
-	*port->tx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+
+	flags = arch_local_cli_save();
+	*port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
 	x = *port->tx_icr;
+	arch_local_irq_restore(flags);
 }
 
 static void mn10300_serial_en_tx_intr(struct mn10300_serial_port *port)
 {
+	unsigned long flags;
 	u16 x;
-	*port->tx_icr = GxICR_LEVEL_1 | GxICR_ENABLE;
+
+	flags = arch_local_cli_save();
+	*port->tx_icr =
+		NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL) | GxICR_ENABLE;
 	x = *port->tx_icr;
+	arch_local_irq_restore(flags);
 }
 
 static void mn10300_serial_dis_rx_intr(struct mn10300_serial_port *port)
 {
+	unsigned long flags;
 	u16 x;
-	*port->rx_icr = GxICR_LEVEL_1 | GxICR_DETECT;
+
+	flags = arch_local_cli_save();
+	*port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
 	x = *port->rx_icr;
+	arch_local_irq_restore(flags);
 }
 
 /*
@@ -650,7 +720,7 @@ static unsigned int mn10300_serial_tx_empty(struct uart_port *_port)
 static void mn10300_serial_set_mctrl(struct uart_port *_port,
 				     unsigned int mctrl)
 {
-	struct mn10300_serial_port *port =
+	struct mn10300_serial_port *port __attribute__ ((unused)) =
 		container_of(_port, struct mn10300_serial_port, uart);
 
 	_enter("%s,%x", port->name, mctrl);
@@ -706,6 +776,7 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
 			UART_XMIT_SIZE));
 
 	/* kick the virtual DMA controller */
+	arch_local_cli();
 	x = *port->tx_icr;
 	x |= GxICR_ENABLE;
 
@@ -716,10 +787,14 @@ static void mn10300_serial_start_tx(struct uart_port *_port)
 
 	_debug("CTR=%04hx ICR=%02hx STR=%04x TMD=%02hx TBR=%04hx ICR=%04hx",
 	       *port->_control, *port->_intr, *port->_status,
-	       *port->_tmxmd, *port->_tmxbr, *port->tx_icr);
+	       *port->_tmxmd,
+	       (port->div_timer == MNSCx_DIV_TIMER_8BIT) ?
+	           *(volatile u8 *)port->_tmxbr : *port->_tmxbr,
+	       *port->tx_icr);
 
 	*port->tx_icr = x;
 	x = *port->tx_icr;
+	arch_local_sti();
 }
 
 /*
@@ -842,8 +917,10 @@ static int mn10300_serial_startup(struct uart_port *_port)
 	pint->port = port;
 	pint->vdma = mn10300_serial_vdma_tx_handler;
 
-	set_intr_level(port->rx_irq, GxICR_LEVEL_1);
-	set_intr_level(port->tx_irq, GxICR_LEVEL_1);
+	set_intr_level(port->rx_irq,
+		NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
+	set_intr_level(port->tx_irq,
+		NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL));
 	set_irq_chip(port->tm_irq, &mn10300_serial_pic);
 
 	if (request_irq(port->rx_irq, mn10300_serial_interrupt,
@@ -876,6 +953,7 @@ error:
  */
 static void mn10300_serial_shutdown(struct uart_port *_port)
 {
+	u16 x;
 	struct mn10300_serial_port *port =
 		container_of(_port, struct mn10300_serial_port, uart);
 
@@ -897,8 +975,12 @@ static void mn10300_serial_shutdown(struct uart_port *_port)
 	free_irq(port->rx_irq, port);
 	free_irq(port->tx_irq, port);
 
-	*port->rx_icr = GxICR_LEVEL_1;
-	*port->tx_icr = GxICR_LEVEL_1;
+	arch_local_cli();
+	*port->rx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
+	x = *port->rx_icr;
+	*port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
+	x = *port->tx_icr;
+	arch_local_sti();
 }
 
 /*
@@ -947,11 +1029,66 @@ static void mn10300_serial_change_speed(struct mn10300_serial_port *port,
 	/* Determine divisor based on baud rate */
 	battempt = 0;
 
-	if (div_timer == MNSCx_DIV_TIMER_16BIT)
-		scxctr |= SC0CTR_CK_TM8UFLOW_8; /* ( == SC1CTR_CK_TM9UFLOW_8
-						 *   == SC2CTR_CK_TM10UFLOW) */
-	else if (div_timer == MNSCx_DIV_TIMER_8BIT)
+	switch (port->uart.line) {
+#ifdef CONFIG_MN10300_TTYSM0
+	case 0: /* ttySM0 */
+#if   defined(CONFIG_MN10300_TTYSM0_TIMER8)
+		scxctr |= SC0CTR_CK_TM8UFLOW_8;
+#elif defined(CONFIG_MN10300_TTYSM0_TIMER0)
+		scxctr |= SC0CTR_CK_TM0UFLOW_8;
+#elif defined(CONFIG_MN10300_TTYSM0_TIMER2)
 		scxctr |= SC0CTR_CK_TM2UFLOW_8;
+#else
+#error "Unknown config for ttySM0"
+#endif
+		break;
+#endif /* CONFIG_MN10300_TTYSM0 */
+
+#ifdef CONFIG_MN10300_TTYSM1
+	case 1: /* ttySM1 */
+#if defined(CONFIG_AM33_2) || defined(CONFIG_AM33_3)
+#if   defined(CONFIG_MN10300_TTYSM1_TIMER9)
+		scxctr |= SC1CTR_CK_TM9UFLOW_8;
+#elif defined(CONFIG_MN10300_TTYSM1_TIMER3)
+		scxctr |= SC1CTR_CK_TM3UFLOW_8;
+#else
+#error "Unknown config for ttySM1"
+#endif
+#else /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+#if defined(CONFIG_MN10300_TTYSM1_TIMER12)
+		scxctr |= SC1CTR_CK_TM12UFLOW_8;
+#else
+#error "Unknown config for ttySM1"
+#endif
+#endif /* CONFIG_AM33_2 || CONFIG_AM33_3 */
+		break;
+#endif /* CONFIG_MN10300_TTYSM1 */
+
+#ifdef CONFIG_MN10300_TTYSM2
+	case 2: /* ttySM2 */
+#if defined(CONFIG_AM33_2)
+#if   defined(CONFIG_MN10300_TTYSM2_TIMER10)
+		scxctr |= SC2CTR_CK_TM10UFLOW;
+#else
+#error "Unknown config for ttySM2"
+#endif
+#else /* CONFIG_AM33_2 */
+#if   defined(CONFIG_MN10300_TTYSM2_TIMER9)
+		scxctr |= SC2CTR_CK_TM9UFLOW_8;
+#elif defined(CONFIG_MN10300_TTYSM2_TIMER1)
+		scxctr |= SC2CTR_CK_TM1UFLOW_8;
+#elif defined(CONFIG_MN10300_TTYSM2_TIMER3)
+		scxctr |= SC2CTR_CK_TM3UFLOW_8;
+#else
+#error "Unknown config for ttySM2"
+#endif
+#endif /* CONFIG_AM33_2 */
+		break;
+#endif /* CONFIG_MN10300_TTYSM2 */
+
+	default:
+		break;
+	}
 
 try_alternative:
 	baud = uart_get_baud_rate(&port->uart, new, old, 0,
@@ -1195,6 +1332,12 @@ static void mn10300_serial_set_termios(struct uart_port *_port,
 		ctr &= ~SC2CTR_TWE;
 		*port->_control = ctr;
 	}
+
+	/* change Transfer bit-order (LSB/MSB) */
+	if (new->c_cflag & CODMSB)
+		*port->_control |= SC01CTR_OD_MSBFIRST; /* MSB MODE */
+	else
+		*port->_control &= ~SC01CTR_OD_MSBFIRST; /* LSB MODE */
 }
 
 /*
@@ -1302,11 +1445,16 @@ static int __init mn10300_serial_init(void)
 	printk(KERN_INFO "%s version %s (%s)\n",
 	       serial_name, serial_version, serial_revdate);
 
-#ifdef CONFIG_MN10300_TTYSM2
-	SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
+#if defined(CONFIG_MN10300_TTYSM2) && defined(CONFIG_AM33_2)
+	{
+		int tmp;
+		SC2TIM = 8; /* make the baud base of timer 2 IOCLK/8 */
+		tmp = SC2TIM;
+	}
 #endif
 
-	set_intr_stub(EXCEP_IRQ_LEVEL1, mn10300_serial_vdma_interrupt);
+	set_intr_stub(NUM2EXCEP_IRQ_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL),
+		mn10300_serial_vdma_interrupt);
 
 	ret = uart_register_driver(&mn10300_serial_driver);
 	if (!ret) {
@@ -1366,9 +1514,11 @@ static void mn10300_serial_console_write(struct console *co,
 	port = mn10300_serial_ports[co->index];
 
 	/* firstly hijack the serial port from the "virtual DMA" controller */
+	arch_local_cli();
 	txicr = *port->tx_icr;
-	*port->tx_icr = GxICR_LEVEL_1;
+	*port->tx_icr = NUM2GxICR_LEVEL(CONFIG_MN10300_SERIAL_IRQ_LEVEL);
 	tmp = *port->tx_icr;
+	arch_local_sti();
 
 	/* the transmitter may be disabled */
 	scxctr = *port->_control;
@@ -1422,8 +1572,10 @@ static void mn10300_serial_console_write(struct console *co,
 	if (!(scxctr & SC01CTR_TXE))
 		*port->_control = scxctr;
 
+	arch_local_cli();
 	*port->tx_icr = txicr;
 	tmp = *port->tx_icr;
+	arch_local_sti();
 }
 
 /*