summaryrefslogtreecommitdiff
path: root/arch/powerpc/platforms/powermac/time.c
diff options
context:
space:
mode:
authorPaul Mackerras <paulus@samba.org>2005-10-10 22:13:53 +1000
committerPaul Mackerras <paulus@samba.org>2005-10-10 22:13:53 +1000
commitf6d57916db2009bd7e220472200cd131fc010d64 (patch)
tree2a8fc645864920c45e2cd12dc5cf88a09da6aebb /arch/powerpc/platforms/powermac/time.c
parentc17e3325ba603642922219b19623764ba5280ad4 (diff)
powerpc: rename powermac files to remove pmac_ prefix
Since the files are now in arch/powerpc/platforms/powermac, the pmac_ prefix that they had is redundant. Signed-off-by: Paul Mackerras <paulus@samba.org>
Diffstat (limited to 'arch/powerpc/platforms/powermac/time.c')
-rw-r--r--arch/powerpc/platforms/powermac/time.c291
1 files changed, 291 insertions, 0 deletions
diff --git a/arch/powerpc/platforms/powermac/time.c b/arch/powerpc/platforms/powermac/time.c
new file mode 100644
index 000000000000..ff6adff36cb8
--- /dev/null
+++ b/arch/powerpc/platforms/powermac/time.c
@@ -0,0 +1,291 @@
+/*
+ * Support for periodic interrupts (100 per second) and for getting
+ * the current time from the RTC on Power Macintoshes.
+ *
+ * We use the decrementer register for our periodic interrupts.
+ *
+ * Paul Mackerras August 1996.
+ * Copyright (C) 1996 Paul Mackerras.
+ */
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/param.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/init.h>
+#include <linux/time.h>
+#include <linux/adb.h>
+#include <linux/cuda.h>
+#include <linux/pmu.h>
+#include <linux/hardirq.h>
+
+#include <asm/sections.h>
+#include <asm/prom.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/machdep.h>
+#include <asm/time.h>
+#include <asm/nvram.h>
+
+/* Apparently the RTC stores seconds since 1 Jan 1904 */
+#define RTC_OFFSET 2082844800
+
+/*
+ * Calibrate the decrementer frequency with the VIA timer 1.
+ */
+#define VIA_TIMER_FREQ_6 4700000 /* time 1 frequency * 6 */
+
+/* VIA registers */
+#define RS 0x200 /* skip between registers */
+#define T1CL (4*RS) /* Timer 1 ctr/latch (low 8 bits) */
+#define T1CH (5*RS) /* Timer 1 counter (high 8 bits) */
+#define T1LL (6*RS) /* Timer 1 latch (low 8 bits) */
+#define T1LH (7*RS) /* Timer 1 latch (high 8 bits) */
+#define ACR (11*RS) /* Auxiliary control register */
+#define IFR (13*RS) /* Interrupt flag register */
+
+/* Bits in ACR */
+#define T1MODE 0xc0 /* Timer 1 mode */
+#define T1MODE_CONT 0x40 /* continuous interrupts */
+
+/* Bits in IFR and IER */
+#define T1_INT 0x40 /* Timer 1 interrupt */
+
+extern struct timezone sys_tz;
+
+long __init
+pmac_time_init(void)
+{
+#ifdef CONFIG_NVRAM
+ s32 delta = 0;
+ int dst;
+
+ delta = ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x9)) << 16;
+ delta |= ((s32)pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xa)) << 8;
+ delta |= pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0xb);
+ if (delta & 0x00800000UL)
+ delta |= 0xFF000000UL;
+ dst = ((pmac_xpram_read(PMAC_XPRAM_MACHINE_LOC + 0x8) & 0x80) != 0);
+ printk("GMT Delta read from XPRAM: %d minutes, DST: %s\n", delta/60,
+ dst ? "on" : "off");
+ return delta;
+#else
+ return 0;
+#endif
+}
+
+unsigned long
+pmac_get_rtc_time(void)
+{
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
+ struct adb_request req;
+ unsigned long now;
+#endif
+
+ /* Get the time from the RTC */
+ switch (sys_ctrler) {
+#ifdef CONFIG_ADB_CUDA
+ case SYS_CTRLER_CUDA:
+ if (cuda_request(&req, NULL, 2, CUDA_PACKET, CUDA_GET_TIME) < 0)
+ return 0;
+ while (!req.complete)
+ cuda_poll();
+ if (req.reply_len != 7)
+ printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ now = (req.reply[3] << 24) + (req.reply[4] << 16)
+ + (req.reply[5] << 8) + req.reply[6];
+ return now - RTC_OFFSET;
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_ADB_PMU
+ case SYS_CTRLER_PMU:
+ if (pmu_request(&req, NULL, 1, PMU_READ_RTC) < 0)
+ return 0;
+ while (!req.complete)
+ pmu_poll();
+ if (req.reply_len != 4)
+ printk(KERN_ERR "pmac_get_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ now = (req.reply[0] << 24) + (req.reply[1] << 16)
+ + (req.reply[2] << 8) + req.reply[3];
+ return now - RTC_OFFSET;
+#endif /* CONFIG_ADB_PMU */
+ default: ;
+ }
+ return 0;
+}
+
+int
+pmac_set_rtc_time(unsigned long nowtime)
+{
+#if defined(CONFIG_ADB_CUDA) || defined(CONFIG_ADB_PMU)
+ struct adb_request req;
+#endif
+
+ nowtime += RTC_OFFSET;
+
+ switch (sys_ctrler) {
+#ifdef CONFIG_ADB_CUDA
+ case SYS_CTRLER_CUDA:
+ if (cuda_request(&req, NULL, 6, CUDA_PACKET, CUDA_SET_TIME,
+ nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0)
+ return 0;
+ while (!req.complete)
+ cuda_poll();
+ if ((req.reply_len != 3) && (req.reply_len != 7))
+ printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ return 1;
+#endif /* CONFIG_ADB_CUDA */
+#ifdef CONFIG_ADB_PMU
+ case SYS_CTRLER_PMU:
+ if (pmu_request(&req, NULL, 5, PMU_SET_RTC,
+ nowtime >> 24, nowtime >> 16, nowtime >> 8, nowtime) < 0)
+ return 0;
+ while (!req.complete)
+ pmu_poll();
+ if (req.reply_len != 0)
+ printk(KERN_ERR "pmac_set_rtc_time: got %d byte reply\n",
+ req.reply_len);
+ return 1;
+#endif /* CONFIG_ADB_PMU */
+ default:
+ return 0;
+ }
+}
+
+/*
+ * Calibrate the decrementer register using VIA timer 1.
+ * This is used both on powermacs and CHRP machines.
+ */
+int __init
+via_calibrate_decr(void)
+{
+ struct device_node *vias;
+ volatile unsigned char __iomem *via;
+ int count = VIA_TIMER_FREQ_6 / 100;
+ unsigned int dstart, dend;
+
+ vias = find_devices("via-cuda");
+ if (vias == 0)
+ vias = find_devices("via-pmu");
+ if (vias == 0)
+ vias = find_devices("via");
+ if (vias == 0 || vias->n_addrs == 0)
+ return 0;
+ via = ioremap(vias->addrs[0].address, vias->addrs[0].size);
+
+ /* set timer 1 for continuous interrupts */
+ out_8(&via[ACR], (via[ACR] & ~T1MODE) | T1MODE_CONT);
+ /* set the counter to a small value */
+ out_8(&via[T1CH], 2);
+ /* set the latch to `count' */
+ out_8(&via[T1LL], count);
+ out_8(&via[T1LH], count >> 8);
+ /* wait until it hits 0 */
+ while ((in_8(&via[IFR]) & T1_INT) == 0)
+ ;
+ dstart = get_dec();
+ /* clear the interrupt & wait until it hits 0 again */
+ in_8(&via[T1CL]);
+ while ((in_8(&via[IFR]) & T1_INT) == 0)
+ ;
+ dend = get_dec();
+
+ tb_ticks_per_jiffy = (dstart - dend) / (6 * (HZ/100));
+ tb_to_us = mulhwu_scale_factor(dstart - dend, 60000);
+
+ printk(KERN_INFO "via_calibrate_decr: ticks per jiffy = %u (%u ticks)\n",
+ tb_ticks_per_jiffy, dstart - dend);
+
+ iounmap(via);
+
+ return 1;
+}
+
+#ifdef CONFIG_PM
+/*
+ * Reset the time after a sleep.
+ */
+static int
+time_sleep_notify(struct pmu_sleep_notifier *self, int when)
+{
+ static unsigned long time_diff;
+ unsigned long flags;
+ unsigned long seq;
+
+ switch (when) {
+ case PBOOK_SLEEP_NOW:
+ do {
+ seq = read_seqbegin_irqsave(&xtime_lock, flags);
+ time_diff = xtime.tv_sec - pmac_get_rtc_time();
+ } while (read_seqretry_irqrestore(&xtime_lock, seq, flags));
+ break;
+ case PBOOK_WAKE:
+ write_seqlock_irqsave(&xtime_lock, flags);
+ xtime.tv_sec = pmac_get_rtc_time() + time_diff;
+ xtime.tv_nsec = 0;
+ last_rtc_update = xtime.tv_sec;
+ write_sequnlock_irqrestore(&xtime_lock, flags);
+ break;
+ }
+ return PBOOK_SLEEP_OK;
+}
+
+static struct pmu_sleep_notifier time_sleep_notifier = {
+ time_sleep_notify, SLEEP_LEVEL_MISC,
+};
+#endif /* CONFIG_PM */
+
+/*
+ * Query the OF and get the decr frequency.
+ * This was taken from the pmac time_init() when merging the prep/pmac
+ * time functions.
+ */
+void __init
+pmac_calibrate_decr(void)
+{
+ struct device_node *cpu;
+ unsigned int freq, *fp;
+
+#ifdef CONFIG_PM
+ pmu_register_sleep_notifier(&time_sleep_notifier);
+#endif /* CONFIG_PM */
+
+ /* We assume MacRISC2 machines have correct device-tree
+ * calibration. That's better since the VIA itself seems
+ * to be slightly off. --BenH
+ */
+ if (!machine_is_compatible("MacRISC2") &&
+ !machine_is_compatible("MacRISC3") &&
+ !machine_is_compatible("MacRISC4"))
+ if (via_calibrate_decr())
+ return;
+
+ /* Special case: QuickSilver G4s seem to have a badly calibrated
+ * timebase-frequency in OF, VIA is much better on these. We should
+ * probably implement calibration based on the KL timer on these
+ * machines anyway... -BenH
+ */
+ if (machine_is_compatible("PowerMac3,5"))
+ if (via_calibrate_decr())
+ return;
+ /*
+ * The cpu node should have a timebase-frequency property
+ * to tell us the rate at which the decrementer counts.
+ */
+ cpu = find_type_devices("cpu");
+ if (cpu == 0)
+ panic("can't find cpu node in time_init");
+ fp = (unsigned int *) get_property(cpu, "timebase-frequency", NULL);
+ if (fp == 0)
+ panic("can't get cpu timebase frequency");
+ freq = *fp;
+ printk("time_init: decrementer frequency = %u.%.6u MHz\n",
+ freq/1000000, freq%1000000);
+ tb_ticks_per_jiffy = freq / HZ;
+ tb_to_us = mulhwu_scale_factor(freq, 1000000);
+}