[POWERPC] Rename device_is_compatible to of_device_is_compatible

for consistency with other Open Firmware interfaces (and Sparc).

This is just a straight replacement.

This leaves the compatibility define in place.

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Paul Mackerras <paulus@samba.org>

7 files changed, 37 insertions, 37 deletions

diff --git a/arch/powerpc/platforms/powermac/feature.c b/arch/powerpc/platforms/powermac/feature.c
index 52cfdd86c928..f29705f8047d 100644
--- a/arch/powerpc/platforms/powermac/feature.c
+++ b/arch/powerpc/platforms/powermac/feature.c
@@ -1418,7 +1418,7 @@ static long g5_eth_phy_reset(struct device_node *node, long param, long value)
 	phy = of_get_next_child(node, NULL);
 	if (!phy)
 		return -ENODEV;
-	need_reset = device_is_compatible(phy, "B5221");
+	need_reset = of_device_is_compatible(phy, "B5221");
 	of_node_put(phy);
 	if (!need_reset)
 		return 0;
@@ -2624,7 +2624,7 @@ static void __init probe_one_macio(const char *name, const char *compat, int typ
 	for (node = NULL; (node = of_find_node_by_name(node, name)) != NULL;) {
 		if (!compat)
 			break;
-		if (device_is_compatible(node, compat))
+		if (of_device_is_compatible(node, compat))
 			break;
 	}
 	if (!node)
@@ -2728,7 +2728,7 @@ initial_serial_shutdown(struct device_node *np)
 	conn = of_get_property(np, "AAPL,connector", &len);
 	if (conn && (strcmp(conn, "infrared") == 0))
 		port_type = PMAC_SCC_IRDA;
-	else if (device_is_compatible(np, "cobalt"))
+	else if (of_device_is_compatible(np, "cobalt"))
 		modem = 1;
 	else if (slots && slots->count > 0) {
 		if (strcmp(slots->name, "IrDA") == 0)
@@ -2787,7 +2787,7 @@ set_initial_features(void)
 		 */
 		np = of_find_node_by_name(NULL, "ethernet");
 		while(np) {
-			if (device_is_compatible(np, "K2-GMAC"))
+			if (of_device_is_compatible(np, "K2-GMAC"))
 				g5_gmac_enable(np, 0, 1);
 			np = of_find_node_by_name(np, "ethernet");
 		}
@@ -2799,7 +2799,7 @@ set_initial_features(void)
 		 */
 		np = of_find_node_by_name(NULL, "firewire");
 		while(np) {
-			if (device_is_compatible(np, "pci106b,5811")) {
+			if (of_device_is_compatible(np, "pci106b,5811")) {
 				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
 				g5_fw_enable(np, 0, 1);
 			}
@@ -2817,8 +2817,8 @@ set_initial_features(void)
 		np = of_find_node_by_name(NULL, "ethernet");
 		while(np) {
 			if (np->parent
-			    && device_is_compatible(np->parent, "uni-north")
-			    && device_is_compatible(np, "gmac"))
+			    && of_device_is_compatible(np->parent, "uni-north")
+			    && of_device_is_compatible(np, "gmac"))
 				core99_gmac_enable(np, 0, 1);
 			np = of_find_node_by_name(np, "ethernet");
 		}
@@ -2831,10 +2831,10 @@ set_initial_features(void)
 		np = of_find_node_by_name(NULL, "firewire");
 		while(np) {
 			if (np->parent
-			    && device_is_compatible(np->parent, "uni-north")
-			    && (device_is_compatible(np, "pci106b,18") ||
-			        device_is_compatible(np, "pci106b,30") ||
-			        device_is_compatible(np, "pci11c1,5811"))) {
+			    && of_device_is_compatible(np->parent, "uni-north")
+			    && (of_device_is_compatible(np, "pci106b,18") ||
+			        of_device_is_compatible(np, "pci106b,30") ||
+			        of_device_is_compatible(np, "pci11c1,5811"))) {
 				macio_chips[0].flags |= MACIO_FLAG_FW_SUPPORTED;
 				core99_firewire_enable(np, 0, 1);
 			}
@@ -2845,8 +2845,8 @@ set_initial_features(void)
 		np = of_find_node_by_name(NULL, "ata-6");
 		while(np) {
 			if (np->parent
-			    && device_is_compatible(np->parent, "uni-north")
-			    && device_is_compatible(np, "kauai-ata")) {
+			    && of_device_is_compatible(np->parent, "uni-north")
+			    && of_device_is_compatible(np, "kauai-ata")) {
 				core99_ata100_enable(np, 1);
 			}
 			np = of_find_node_by_name(np, "ata-6");
diff --git a/arch/powerpc/platforms/powermac/low_i2c.c b/arch/powerpc/platforms/powermac/low_i2c.c
index 5430e146b3e9..3f507ab9c5e5 100644
--- a/arch/powerpc/platforms/powermac/low_i2c.c
+++ b/arch/powerpc/platforms/powermac/low_i2c.c
@@ -1207,7 +1207,7 @@ static void pmac_i2c_devscan(void (*callback)(struct device_node *dev,
 				if (strcmp(np->name, p->name))
 					continue;
 				if (p->compatible &&
-				    !device_is_compatible(np, p->compatible))
+				    !of_device_is_compatible(np, p->compatible))
 					continue;
 				if (p->quirks & pmac_i2c_quirk_skip)
 					break;
diff --git a/arch/powerpc/platforms/powermac/nvram.c b/arch/powerpc/platforms/powermac/nvram.c
index 692945c14919..c6f0f9e738e5 100644
--- a/arch/powerpc/platforms/powermac/nvram.c
+++ b/arch/powerpc/platforms/powermac/nvram.c
@@ -553,7 +553,7 @@ static int __init core99_nvram_setup(struct device_node *dp, unsigned long addr)
 	 * identify the chip using flash id commands and base ourselves on
 	 * a list of known chips IDs
 	 */
-	if (device_is_compatible(dp, "amd-0137")) {
+	if (of_device_is_compatible(dp, "amd-0137")) {
 		core99_erase_bank = amd_erase_bank;
 		core99_write_bank = amd_write_bank;
 	} else {
@@ -588,7 +588,7 @@ int __init pmac_nvram_init(void)
 		}
 	}
 
-	is_core_99 = device_is_compatible(dp, "nvram,flash");
+	is_core_99 = of_device_is_compatible(dp, "nvram,flash");
 	if (is_core_99) {
 		err = core99_nvram_setup(dp, r1.start);
 		goto bail;
diff --git a/arch/powerpc/platforms/powermac/pci.c b/arch/powerpc/platforms/powermac/pci.c
index 22c4ae4c6934..c4af9e21ac93 100644
--- a/arch/powerpc/platforms/powermac/pci.c
+++ b/arch/powerpc/platforms/powermac/pci.c
@@ -934,15 +934,15 @@ static int __init add_bridge(struct device_node *dev)
 
 	/* 64 bits only bridges */
 #ifdef CONFIG_PPC64
-	if (device_is_compatible(dev, "u3-agp")) {
+	if (of_device_is_compatible(dev, "u3-agp")) {
 		setup_u3_agp(hose);
 		disp_name = "U3-AGP";
 		primary = 0;
-	} else if (device_is_compatible(dev, "u3-ht")) {
+	} else if (of_device_is_compatible(dev, "u3-ht")) {
 		setup_u3_ht(hose);
 		disp_name = "U3-HT";
 		primary = 1;
-	} else if (device_is_compatible(dev, "u4-pcie")) {
+	} else if (of_device_is_compatible(dev, "u4-pcie")) {
 		setup_u4_pcie(hose);
 		disp_name = "U4-PCIE";
 		primary = 0;
@@ -953,7 +953,7 @@ static int __init add_bridge(struct device_node *dev)
 
 	/* 32 bits only bridges */
 #ifdef CONFIG_PPC32
-	if (device_is_compatible(dev, "uni-north")) {
+	if (of_device_is_compatible(dev, "uni-north")) {
 		primary = setup_uninorth(hose, &rsrc);
 		disp_name = "UniNorth";
 	} else if (strcmp(dev->name, "pci") == 0) {
@@ -1129,21 +1129,21 @@ pmac_pci_enable_device_hook(struct pci_dev *dev, int initial)
 		return 0;
 
 	uninorth_child = node->parent &&
-		device_is_compatible(node->parent, "uni-north");
+		of_device_is_compatible(node->parent, "uni-north");
 
 	/* Firewire & GMAC were disabled after PCI probe, the driver is
 	 * claiming them, we must re-enable them now.
 	 */
 	if (uninorth_child && !strcmp(node->name, "firewire") &&
-	    (device_is_compatible(node, "pci106b,18") ||
-	     device_is_compatible(node, "pci106b,30") ||
-	     device_is_compatible(node, "pci11c1,5811"))) {
+	    (of_device_is_compatible(node, "pci106b,18") ||
+	     of_device_is_compatible(node, "pci106b,30") ||
+	     of_device_is_compatible(node, "pci11c1,5811"))) {
 		pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, node, 0, 1);
 		pmac_call_feature(PMAC_FTR_1394_ENABLE, node, 0, 1);
 		updatecfg = 1;
 	}
 	if (uninorth_child && !strcmp(node->name, "ethernet") &&
-	    device_is_compatible(node, "gmac")) {
+	    of_device_is_compatible(node, "gmac")) {
 		pmac_call_feature(PMAC_FTR_GMAC_ENABLE, node, 0, 1);
 		updatecfg = 1;
 	}
@@ -1203,18 +1203,18 @@ void __init pmac_pcibios_after_init(void)
 #endif /* CONFIG_BLK_DEV_IDE */
 
 	for_each_node_by_name(nd, "firewire") {
-		if (nd->parent && (device_is_compatible(nd, "pci106b,18") ||
-				   device_is_compatible(nd, "pci106b,30") ||
-				   device_is_compatible(nd, "pci11c1,5811"))
-		    && device_is_compatible(nd->parent, "uni-north")) {
+		if (nd->parent && (of_device_is_compatible(nd, "pci106b,18") ||
+				   of_device_is_compatible(nd, "pci106b,30") ||
+				   of_device_is_compatible(nd, "pci11c1,5811"))
+		    && of_device_is_compatible(nd->parent, "uni-north")) {
 			pmac_call_feature(PMAC_FTR_1394_ENABLE, nd, 0, 0);
 			pmac_call_feature(PMAC_FTR_1394_CABLE_POWER, nd, 0, 0);
 		}
 	}
 	of_node_put(nd);
 	for_each_node_by_name(nd, "ethernet") {
-		if (nd->parent && device_is_compatible(nd, "gmac")
-		    && device_is_compatible(nd->parent, "uni-north"))
+		if (nd->parent && of_device_is_compatible(nd, "gmac")
+		    && of_device_is_compatible(nd->parent, "uni-north"))
 			pmac_call_feature(PMAC_FTR_GMAC_ENABLE, nd, 0, 0);
 	}
 	of_node_put(nd);
diff --git a/arch/powerpc/platforms/powermac/pic.c b/arch/powerpc/platforms/powermac/pic.c
index ae5097ac0378..87cd6805171a 100644
--- a/arch/powerpc/platforms/powermac/pic.c
+++ b/arch/powerpc/platforms/powermac/pic.c
@@ -364,7 +364,7 @@ static void __init pmac_pic_probe_oldstyle(void)
 		slave = of_find_node_by_name(master, "mac-io");
 
 		/* Check ordering of master & slave */
-		if (device_is_compatible(master, "gatwick")) {
+		if (of_device_is_compatible(master, "gatwick")) {
 			struct device_node *tmp;
 			BUG_ON(slave == NULL);
 			tmp = master;
diff --git a/arch/powerpc/platforms/powermac/setup.c b/arch/powerpc/platforms/powermac/setup.c
index e365bff74d83..a410bc76a8a8 100644
--- a/arch/powerpc/platforms/powermac/setup.c
+++ b/arch/powerpc/platforms/powermac/setup.c
@@ -659,8 +659,8 @@ static int pmac_pci_probe_mode(struct pci_bus *bus)
 	/* We need to use normal PCI probing for the AGP bus,
 	 * since the device for the AGP bridge isn't in the tree.
 	 */
-	if (bus->self == NULL && (device_is_compatible(node, "u3-agp") ||
-				  device_is_compatible(node, "u4-pcie")))
+	if (bus->self == NULL && (of_device_is_compatible(node, "u3-agp") ||
+				  of_device_is_compatible(node, "u4-pcie")))
 		return PCI_PROBE_NORMAL;
 	return PCI_PROBE_DEVTREE;
 }
diff --git a/arch/powerpc/platforms/powermac/smp.c b/arch/powerpc/platforms/powermac/smp.c
index 330354113186..84f1860493bb 100644
--- a/arch/powerpc/platforms/powermac/smp.c
+++ b/arch/powerpc/platforms/powermac/smp.c
@@ -562,7 +562,7 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
 	/* Look for the clock chip */
 	while ((cc = of_find_node_by_name(cc, "i2c-hwclock")) != NULL) {
 		p = of_get_parent(cc);
-		ok = p && device_is_compatible(p, "uni-n-i2c");
+		ok = p && of_device_is_compatible(p, "uni-n-i2c");
 		of_node_put(p);
 		if (!ok)
 			continue;
@@ -575,11 +575,11 @@ static void __init smp_core99_setup_i2c_hwsync(int ncpus)
 			continue;
 		switch (*reg) {
 		case 0xd2:
-			if (device_is_compatible(cc,"pulsar-legacy-slewing")) {
+			if (of_device_is_compatible(cc,"pulsar-legacy-slewing")) {
 				pmac_tb_freeze = smp_core99_pulsar_tb_freeze;
 				pmac_tb_pulsar_addr = 0xd2;
 				name = "Pulsar";
-			} else if (device_is_compatible(cc, "cy28508")) {
+			} else if (of_device_is_compatible(cc, "cy28508")) {
 				pmac_tb_freeze = smp_core99_cypress_tb_freeze;
 				name = "Cypress";
 			}