summaryrefslogtreecommitdiff
path: root/arch/s390
diff options
context:
space:
mode:
authorHeiko Carstens <heiko.carstens@de.ibm.com>2015-11-13 14:17:14 +0100
committerMartin Schwidefsky <schwidefsky@de.ibm.com>2015-11-16 12:51:11 +0100
commitf52c74fee95f1f4dd2bc1c75e016d849150eb2de (patch)
tree3f3a690b00106163205d70921b9fc2ab1cb5f4a6 /arch/s390
parent932f608193cdbd3a275a4aefb94760dfd4a1f736 (diff)
s390: remove SALIPL loader
There is no known user, therefore remove the code. Acked-by: Rob Van Der Heij <robvdheij@nl.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
Diffstat (limited to 'arch/s390')
-rw-r--r--arch/s390/kernel/head.S87
1 files changed, 8 insertions, 79 deletions
diff --git a/arch/s390/kernel/head.S b/arch/s390/kernel/head.S
index 1b0f624cebd7..301ee9c70688 100644
--- a/arch/s390/kernel/head.S
+++ b/arch/s390/kernel/head.S
@@ -60,19 +60,6 @@ __HEAD
.long 0x020006e0,0x20000050
.org 0x200
-#
-# subroutine to set architecture mode
-#
-.Lsetmode:
- mvi __LC_AR_MODE_ID,1 # set esame flag
- slr %r0,%r0 # set cpuid to zero
- lhi %r1,2 # mode 2 = esame (dump)
- sigp %r1,%r0,0x12 # switch to esame mode
- bras %r13,0f
- .fill 16,4,0x0
-0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
- sam31 # switch to 31 bit addressing mode
- br %r14
#
# subroutine to wait for end I/O
@@ -160,7 +147,14 @@ __HEAD
.long 0x02200050,0x00000000
iplstart:
- bas %r14,.Lsetmode # Immediately switch to 64 bit mode
+ mvi __LC_AR_MODE_ID,1 # set esame flag
+ slr %r0,%r0 # set cpuid to zero
+ lhi %r1,2 # mode 2 = esame (dump)
+ sigp %r1,%r0,0x12 # switch to esame mode
+ bras %r13,0f
+ .fill 16,4,0x0
+0: lmh %r0,%r15,0(%r13) # clear high-order half of gprs
+ sam31 # switch to 31 bit addressing mode
lh %r1,0xb8 # test if subchannel number
bct %r1,.Lnoload # is valid
l %r1,0xb8 # load ipl subchannel number
@@ -270,71 +264,6 @@ iplstart:
.Lcpuid:.fill 8,1,0
#
-# SALIPL loader support. Based on a patch by Rob van der Heij.
-# This entry point is called directly from the SALIPL loader and
-# doesn't need a builtin ipl record.
-#
- .org 0x800
-ENTRY(start)
- stm %r0,%r15,0x07b0 # store registers
- bas %r14,.Lsetmode # Immediately switch to 64 bit mode
- basr %r12,%r0
-.base:
- l %r11,.parm
- l %r8,.cmd # pointer to command buffer
-
- ltr %r9,%r9 # do we have SALIPL parameters?
- bp .sk8x8
-
- mvc 0(64,%r8),0x00b0 # copy saved registers
- xc 64(240-64,%r8),0(%r8) # remainder of buffer
- tr 0(64,%r8),.lowcase
- b .gotr
-.sk8x8:
- mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
-.gotr:
- slr %r0,%r0
- st %r0,INITRD_SIZE+ARCH_OFFSET-PARMAREA(%r11)
- st %r0,INITRD_START+ARCH_OFFSET-PARMAREA(%r11)
- j startup # continue with startup
-.cmd: .long COMMAND_LINE # address of command line buffer
-.parm: .long PARMAREA
-.lowcase:
- .byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
- .byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
- .byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
- .byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
- .byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
- .byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
- .byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
- .byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
- .byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
- .byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
- .byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
- .byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
- .byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
- .byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
- .byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
- .byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
-
- .byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
- .byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
- .byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
- .byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
- .byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
- .byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
- .byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
- .byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
- .byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
- .byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi
- .byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
- .byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr
- .byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx
- .byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz
- .byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
- .byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
-
-#
# startup-code at 0x10000, running in absolute addressing mode
# this is called either by the ipl loader or directly by PSW restart
# or linload or SALIPL