summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorMaxime Ripard <maxime.ripard@free-electrons.com>2015-01-31 12:11:54 +0100
committerMaxime Ripard <maxime.ripard@free-electrons.com>2015-04-27 08:20:20 +0200
commita86d26c85a414d4ec69ff1b1fb66b14d5c3046bd (patch)
tree44907397d980a8d8c3d2acba9b1fa157345f4865 /arch
parentc2e046419f47d10fcd1c427fc45ce6a19c7119ae (diff)
ARM: sun4i: olinuxino lime: Convert to DT label based syntax
In order to lessen the amount of duplication of the DT tree, ease the new and follow the trend that prefers to use label based references when overriding DTSI nodes, convert the board to this syntax Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts213
1 files changed, 104 insertions, 109 deletions
diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
index 75742f8f96f3..03350dff42b1 100644
--- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts
@@ -56,136 +56,131 @@
model = "Olimex A10-OLinuXino-LIME";
compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10";
- cpus {
- cpu0: cpu@0 {
- /*
- * The A10-Lime is known to be unstable
- * when running at 1008 MHz
- */
- operating-points = <
- /* kHz uV */
- 912000 1350000
- 864000 1300000
- 624000 1250000
- >;
- cooling-max-level = <2>;
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_pins_olinuxinolime>;
+
+ green {
+ label = "a10-olinuxino-lime:green:usr";
+ gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
};
};
+};
- soc@01c00000 {
- emac: ethernet@01c0b000 {
- pinctrl-names = "default";
- pinctrl-0 = <&emac_pins_a>;
- phy = <&phy1>;
- status = "okay";
- };
+&ahci {
+ target-supply = <&reg_ahci_5v>;
+ status = "okay";
+};
- mdio@01c0b080 {
- status = "okay";
+&cpu0 {
+ /*
+ * The A10-Lime is known to be unstable when running at 1008 MHz
+ */
+ operating-points = <
+ /* kHz uV */
+ 912000 1350000
+ 864000 1300000
+ 624000 1250000
+ >;
+ cooling-max-level = <2>;
+};
- phy1: ethernet-phy@1 {
- reg = <1>;
- };
- };
+&ehci0 {
+ status = "okay";
+};
- mmc0: mmc@01c0f000 {
- pinctrl-names = "default";
- pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
- vmmc-supply = <&reg_vcc3v3>;
- bus-width = <4>;
- cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
- cd-inverted;
- status = "okay";
- };
+&ehci1 {
+ status = "okay";
+};
- usbphy: phy@01c13400 {
- usb1_vbus-supply = <&reg_usb1_vbus>;
- usb2_vbus-supply = <&reg_usb2_vbus>;
- status = "okay";
- };
+&emac {
+ pinctrl-names = "default";
+ pinctrl-0 = <&emac_pins_a>;
+ phy = <&phy1>;
+ status = "okay";
+};
- ehci0: usb@01c14000 {
- status = "okay";
- };
+&i2c0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c0_pins_a>;
+ status = "okay";
- ohci0: usb@01c14400 {
- status = "okay";
- };
+ axp209: pmic@34 {
+ compatible = "x-powers,axp209";
+ reg = <0x34>;
+ interrupts = <0>;
- ahci: sata@01c18000 {
- target-supply = <&reg_ahci_5v>;
- status = "okay";
- };
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ };
+};
- ehci1: usb@01c1c000 {
- status = "okay";
- };
+&mdio {
+ status = "okay";
- ohci1: usb@01c1c400 {
- status = "okay";
- };
+ phy1: ethernet-phy@1 {
+ reg = <1>;
+ };
+};
- pinctrl@01c20800 {
- ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
- allwinner,pins = "PC3";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_10_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
-
- led_pins_olinuxinolime: led_pins@0 {
- allwinner,pins = "PH2";
- allwinner,function = "gpio_out";
- allwinner,drive = <SUN4I_PINCTRL_20_MA>;
- allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
- };
- };
+&mmc0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>;
+ vmmc-supply = <&reg_vcc3v3>;
+ bus-width = <4>;
+ cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
+ cd-inverted;
+ status = "okay";
+};
- uart0: serial@01c28000 {
- pinctrl-names = "default";
- pinctrl-0 = <&uart0_pins_a>;
- status = "okay";
- };
+&ohci0 {
+ status = "okay";
+};
- i2c0: i2c@01c2ac00 {
- pinctrl-names = "default";
- pinctrl-0 = <&i2c0_pins_a>;
- status = "okay";
+&ohci1 {
+ status = "okay";
+};
- axp209: pmic@34 {
- compatible = "x-powers,axp209";
- reg = <0x34>;
- interrupts = <0>;
+&pio {
+ ahci_pwr_pin_olinuxinolime: ahci_pwr_pin@1 {
+ allwinner,pins = "PC3";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+ };
- interrupt-controller;
- #interrupt-cells = <1>;
- };
- };
+ led_pins_olinuxinolime: led_pins@0 {
+ allwinner,pins = "PH2";
+ allwinner,function = "gpio_out";
+ allwinner,drive = <SUN4I_PINCTRL_20_MA>;
+ allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
};
+};
- leds {
- compatible = "gpio-leds";
- pinctrl-names = "default";
- pinctrl-0 = <&led_pins_olinuxinolime>;
+&reg_ahci_5v {
+ pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
+ gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
- green {
- label = "a10-olinuxino-lime:green:usr";
- gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>;
- default-state = "on";
- };
- };
+&reg_usb1_vbus {
+ status = "okay";
+};
- reg_ahci_5v: ahci-5v {
- pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>;
- gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>;
- status = "okay";
- };
+&reg_usb2_vbus {
+ status = "okay";
+};
- reg_usb1_vbus: usb1-vbus {
- status = "okay";
- };
+&uart0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&uart0_pins_a>;
+ status = "okay";
+};
- reg_usb2_vbus: usb2-vbus {
- status = "okay";
- };
+&usbphy {
+ usb1_vbus-supply = <&reg_usb1_vbus>;
+ usb2_vbus-supply = <&reg_usb2_vbus>;
+ status = "okay";
};