ARM: pm: convert samsung platforms to generic suspend/resume support

Tested-by: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

5 files changed, 14 insertions, 239 deletions

diff --git a/arch/arm/mach-s3c64xx/sleep.S b/arch/arm/mach-s3c64xx/sleep.S
index b2ef44317368..afe5a762f46e 100644
--- a/arch/arm/mach-s3c64xx/sleep.S
+++ b/arch/arm/mach-s3c64xx/sleep.S
@@ -32,25 +32,13 @@
 	 * code after resume.
 	 *
 	 * entry:
-	 *	r0 = pointer to the save block
+	 *	r1 = v:p offset
 	*/
 
 ENTRY(s3c_cpu_save)
 	stmfd	sp!, { r4 - r12, lr }
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-
-	stmia	r0, { r4 - r13 }	@ Save CP registers and SP
-
-	@@ save our state to ram
-	bl	s3c_pm_cb_flushcache
+	ldr	r3, =resume_with_mmu
+	bl	cpu_suspend
 
 	@@ call final suspend code
 	ldr	r0, =pm_cpu_sleep
@@ -61,18 +49,6 @@ ENTRY(s3c_cpu_save)
 resume_with_mmu:
 	ldmfd	sp!, { r4 - r12, pc }	@ return, from sp from s3c_cpu_save
 
-	.data
-
-	/* the next bit is code, but it requires easy access to the
-	 * s3c_sleep_save_phys data before the MMU is switched on, so
-	 * we store the code that needs this variable in the .data where
-	 * the value can be written to (the .text segment is RO).
-	*/
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
 	/* Sleep magic, the word before the resume entry point so that the
 	 * bootloader can check for a resumeable image. */
 
@@ -110,35 +86,4 @@ ENTRY(s3c_cpu_resume)
 	orr	r0, r0, #1 << 15			@ GPN15
 	str	r0, [ r3, #S3C64XX_GPNDAT ]
 #endif
-
-	/* __v6_setup from arch/arm/mm/proc-v6.S, ensure that the caches
-	 * are thoroughly cleaned just in case the bootloader didn't do it
-	 * for us. */
-	mov	r0, #0
-	mcr	p15, 0, r0, c7, c14, 0		@ clean+invalidate D cache
-	mcr	p15, 0, r0, c7, c5, 0		@ invalidate I cache
-	mcr	p15, 0, r0, c7, c15, 0		@ clean+invalidate cache
-	mcr	p15, 0, r0, c7, c10, 4		@ drain write buffer
-	@@mcr	p15, 0, r0, c8, c7, 0		@ invalidate I + D TLBs
-	@@mcr	p15, 0, r0, c7, c7, 0		@ Invalidate I + D caches
-
-	ldr	r0, s3c_sleep_save_phys
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mcr	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mcr	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mcr	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mcr	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mcr	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-
-	mov	r0, #0			@ restore copro access controls
-	mcr	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-	mcr 	p15, 0, r0, c7, c5, 4
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		/* turn mmu back on */
-	nop
-	mov	pc, r2				/* jump back */
-
-	.end
+	b	cpu_resume
diff --git a/arch/arm/mach-s5pv210/sleep.S b/arch/arm/mach-s5pv210/sleep.S
index d4d222b716b4..a3d649466fb1 100644
--- a/arch/arm/mach-s5pv210/sleep.S
+++ b/arch/arm/mach-s5pv210/sleep.S
@@ -35,50 +35,24 @@
 	/* s3c_cpu_save
 	 *
 	 * entry:
-	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
+	 *	r1 = v:p offset
 	*/
 
 ENTRY(s3c_cpu_save)
 
 	stmfd	sp!, { r3 - r12, lr }
-
-	mrc	p15, 0, r4, c13, c0, 0	@ FCSE/PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ Translation Table BASE0
-	mrc	p15, 0, r7, c2, c0, 1	@ Translation Table BASE1
-	mrc	p15, 0, r8, c2, c0, 2	@ Translation Table Control
-	mrc	p15, 0, r9, c1, c0, 0	@ Control register
-	mrc	p15, 0, r10, c1, c0, 1	@ Auxiliary control register
-	mrc	p15, 0, r11, c1, c0, 2	@ Co-processor access controls
-	mrc	p15, 0, r12, c10, c2, 0	@ Read PRRR
-	mrc	p15, 0, r3, c10, c2, 1	@ READ NMRR
-
-	stmia	r0, { r3 - r13 }
-
-	bl	s3c_pm_cb_flushcache
+	ldr	r3, =resume_with_mmu
+	bl	cpu_suspend
 
 	ldr	r0, =pm_cpu_sleep
 	ldr	r0, [ r0 ]
 	mov	pc, r0
 
 resume_with_mmu:
-	/*
-	 * After MMU is turned on, restore the previous MMU table.
-	 */
-	ldr	r9 , =(PAGE_OFFSET - PHYS_OFFSET)
-	add	r4, r4, r9
-	str	r12, [r4]
-
 	ldmfd	sp!, { r3 - r12, pc }
 
 	.ltorg
 
-	.data
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
 	/* sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
 	 * s3c_cpu_resume entry.
@@ -96,75 +70,4 @@ s3c_sleep_save_phys:
 	*/
 
 ENTRY(s3c_cpu_resume)
-	mov	r0, #PSR_I_BIT | PSR_F_BIT | SVC_MODE
-	msr	cpsr_c, r0
-
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@ invalidate TLBs
-	mcr	p15, 0, r1, c7, c5, 0		@ invalidate I Cache
-
-	ldr	r0, s3c_sleep_save_phys		@ address of restore block
-	ldmia	r0, { r3 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0		@ FCSE/PID
-	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
-
-	mcr	p15, 0, r8, c2, c0, 2		@ Translation Table Control
-	mcr	p15, 0, r7, c2, c0, 1		@ Translation Table BASE1
-	mcr	p15, 0, r6, c2, c0, 0		@ Translation Table BASE0
-
-	mcr	p15, 0, r10, c1, c0, 1		@ Auxiliary control register
-
-	mov	r0, #0
-	mcr	p15, 0, r0, c8, c7, 0		@ Invalidate I & D TLB
-
-	mov	r0, #0				@ restore copro access
-	mcr	p15, 0, r11, c1, c0, 2		@ Co-processor access
-	mcr 	p15, 0, r0, c7, c5, 4
-
-	mcr	p15, 0, r12, c10, c2, 0		@ write PRRR
-	mcr	p15, 0, r3, c10, c2, 1		@ write NMRR
-
-	/*
-	 * In Cortex-A8, when MMU is turned on, the pipeline is flushed.
-	 * And there are no valid entries in the MMU table at this point.
-	 * So before turning on the MMU, the MMU entry for the DRAM address
-	 * range is added. After the MMU is turned on, the other entries
-	 * in the MMU table will be restored.
-	*/
-
-	/* r6 = Translation Table BASE0 */
-	mov	r4, r6
-	mov	r4, r4, LSR #14
-	mov	r4, r4, LSL #14
-
-	/* Load address for adding to MMU table list */
-	ldr	r11, =0xE010F000		@ INFORM0 reg.
-	ldr	r10, [r11, #0]
-	mov	r10, r10, LSR #18
-	bic	r10, r10, #0x3
-	orr	r4, r4, r10
-
-	/* Calculate MMU table entry */
-	mov 	r10, r10, LSL #18
-	ldr	r5, =0x40E
-	orr	r10, r10, r5
-
-	/* Back up originally data */
-	ldr	r12, [r4]
-
-	/* Add calculated MMU table entry into MMU table list */
-	str	r10, [r4]
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r9, c1, c0, 0		@ turn on MMU, etc
-
-	nop
-	nop
-	nop
-	nop
-	nop					@ second-to-last before mmu
-
-	mov	pc, r2				@ go back to virtual address
-
-	.ltorg
+	b	cpu_resume
diff --git a/arch/arm/plat-s3c24xx/sleep.S b/arch/arm/plat-s3c24xx/sleep.S
index e73e3b6e88d2..fd7032f84ae7 100644
--- a/arch/arm/plat-s3c24xx/sleep.S
+++ b/arch/arm/plat-s3c24xx/sleep.S
@@ -44,23 +44,13 @@
 	/* s3c_cpu_save
 	 *
 	 * entry:
-	 *	r0 = save address (virtual addr of s3c_sleep_save_phys)
+	 *	r1 = v:p offset
 	*/
 
 ENTRY(s3c_cpu_save)
 	stmfd	sp!, { r4 - r12, lr }
-
-	@@ store co-processor registers
-
-	mrc	p15, 0, r4, c13, c0, 0	@ PID
-	mrc	p15, 0, r5, c3, c0, 0	@ Domain ID
-	mrc	p15, 0, r6, c2, c0, 0	@ translation table base address
-	mrc	p15, 0, r7, c1, c0, 0	@ control register
-
-	stmia	r0, { r4 - r13 }
-
-	@@ write our state back to RAM
-	bl	s3c_pm_cb_flushcache
+	ldr	r3, =resume_with_mmu
+	bl	cpu_suspend
 
 	@@ jump to final code to send system to sleep
 	ldr	r0, =pm_cpu_sleep
@@ -76,20 +66,6 @@ resume_with_mmu:
 
 	.ltorg
 
-	@@ the next bits sit in the .data segment, even though they
-	@@ happen to be code... the s3c_sleep_save_phys needs to be
-	@@ accessed by the resume code before it can restore the MMU.
-	@@ This means that the variable has to be close enough for the
-	@@ code to read it... since the .text segment needs to be RO,
-	@@ the data segment can be the only place to put this code.
-
-	.data
-
-	.global	s3c_sleep_save_phys
-s3c_sleep_save_phys:
-	.word	0
-
-
 	/* sleep magic, to allow the bootloader to check for an valid
 	 * image to resume to. Must be the first word before the
 	 * s3c_cpu_resume entry.
@@ -100,10 +76,6 @@ s3c_sleep_save_phys:
 	/* s3c_cpu_resume
 	 *
 	 * resume code entry for bootloader to call
-	 *
-	 * we must put this code here in the data segment as we have no
-	 * other way of restoring the stack pointer after sleep, and we
-	 * must not write to the code segment (code is read-only)
 	*/
 
 ENTRY(s3c_cpu_resume)
@@ -134,25 +106,4 @@ ENTRY(s3c_cpu_resume)
 	beq	1001b
 #endif /* CONFIG_DEBUG_RESUME */
 
-	mov	r1, #0
-	mcr	p15, 0, r1, c8, c7, 0		@@ invalidate I & D TLBs
-	mcr	p15, 0, r1, c7, c7, 0		@@ invalidate I & D caches
-
-	ldr	r0, s3c_sleep_save_phys		@ address of restore block
-	ldmia	r0, { r4 - r13 }
-
-	mcr	p15, 0, r4, c13, c0, 0		@ PID
-	mcr	p15, 0, r5, c3, c0, 0		@ Domain ID
-	mcr	p15, 0, r6, c2, c0, 0		@ translation table base
-
-#ifdef CONFIG_DEBUG_RESUME
-	mov	r3, #'R'
-	strb	r3, [ r2, #S3C2410_UTXH ]
-#endif
-
-	ldr	r2, =resume_with_mmu
-	mcr	p15, 0, r7, c1, c0, 0		@ turn on MMU, etc
-	nop					@ second-to-last before mmu
-	mov	pc, r2				@ go back to virtual address
-
-	.ltorg
+	b	cpu_resume
diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h
index d9025e377675..4aa697dfe13f 100644
--- a/arch/arm/plat-samsung/include/plat/pm.h
+++ b/arch/arm/plat-samsung/include/plat/pm.h
@@ -50,13 +50,11 @@ extern unsigned char pm_uart_udivslot;  /* true to save UART UDIVSLOT */
 
 /* from sleep.S */
 
-extern int  s3c_cpu_save(unsigned long *saveblk);
+extern int  s3c_cpu_save(unsigned long *saveblk, long);
 extern void s3c_cpu_resume(void);
 
 extern void s3c2410_cpu_suspend(void);
 
-extern unsigned long s3c_sleep_save_phys;
-
 /* sleep save info */
 
 /**
@@ -179,13 +177,5 @@ extern void s3c_pm_restore_gpios(void);
  */
 extern void s3c_pm_save_gpios(void);
 
-/**
- * s3c_pm_cb_flushcache - callback for assembly code
- *
- * Callback to issue flush_cache_all() as this call is
- * not a directly callable object.
- */
-extern void s3c_pm_cb_flushcache(void);
-
 extern void s3c_pm_save_core(void);
 extern void s3c_pm_restore_core(void);
diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c
index 02d531fb3f81..d5b58d31903c 100644
--- a/arch/arm/plat-samsung/pm.c
+++ b/arch/arm/plat-samsung/pm.c
@@ -241,8 +241,6 @@ void (*pm_cpu_sleep)(void);
 
 static int s3c_pm_enter(suspend_state_t state)
 {
-	static unsigned long regs_save[16];
-
 	/* ensure the debug is initialised (if enabled) */
 
 	s3c_pm_debug_init();
@@ -266,12 +264,6 @@ static int s3c_pm_enter(suspend_state_t state)
 		return -EINVAL;
 	}
 
-	/* store the physical address of the register recovery block */
-
-	s3c_sleep_save_phys = virt_to_phys(regs_save);
-
-	S3C_PMDBG("s3c_sleep_save_phys=0x%08lx\n", s3c_sleep_save_phys);
-
 	/* save all necessary core registers not covered by the drivers */
 
 	s3c_pm_save_gpios();
@@ -305,7 +297,7 @@ static int s3c_pm_enter(suspend_state_t state)
 	 * we resume as it saves its own register state and restores it
 	 * during the resume.  */
 
-	s3c_cpu_save(regs_save);
+	s3c_cpu_save(0, PLAT_PHYS_OFFSET - PAGE_OFFSET);
 
 	/* restore the cpu state using the kernel's cpu init code. */
 
@@ -336,12 +328,6 @@ static int s3c_pm_enter(suspend_state_t state)
 	return 0;
 }
 
-/* callback from assembly code */
-void s3c_pm_cb_flushcache(void)
-{
-	flush_cache_all();
-}
-
 static int s3c_pm_prepare(void)
 {
 	/* prepare check area if configured */