summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 11:00:07 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2014-04-01 11:00:07 -0700
commit1ead65812486cda65093683a99b8907a7242fa93 (patch)
tree094684870815537aae4aedb69c10d669ba29f0af /arch
parentb6d739e9581272f0bbbd6edd15340fb8e108df96 (diff)
parentb97f0291a2504291aef850077f98cab68a5a2f33 (diff)
Merge branch 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer changes from Thomas Gleixner: "This assorted collection provides: - A new timer based timer broadcast feature for systems which do not provide a global accessible timer device. That allows those systems to put CPUs into deep idle states where the per cpu timer device stops. - A few NOHZ_FULL related improvements to the timer wheel - The usual updates to timer devices found in ARM SoCs - Small improvements and updates all over the place" * 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits) tick: Remove code duplication in tick_handle_periodic() tick: Fix spelling mistake in tick_handle_periodic() x86: hpet: Use proper destructor for delayed work workqueue: Provide destroy_delayed_work_on_stack() clocksource: CMT, MTU2, TMU and STI should depend on GENERIC_CLOCKEVENTS timer: Remove code redundancy while calling get_nohz_timer_target() hrtimer: Rearrange comments in the order struct members are declared timer: Use variable head instead of &work_list in __run_timers() clocksource: exynos_mct: silence a static checker warning arm: zynq: Add support for cpufreq arm: zynq: Don't use arm_global_timer with cpufreq clocksource/cadence_ttc: Overhaul clocksource frequency adjustment clocksource/cadence_ttc: Call clockevents_update_freq() with IRQs enabled clocksource: Add Kconfig entries for CMT, MTU2, TMU and STI sh: Remove Kconfig entries for TMU, CMT and MTU2 ARM: shmobile: Remove CMT, TMU and STI Kconfig entries clocksource: armada-370-xp: Use atomic access for shared registers clocksource: orion: Use atomic access for shared registers clocksource: timer-keystone: Delete unnecessary variable clocksource: timer-keystone: introduce clocksource driver for Keystone ...
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/sun4i-a10.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-a10s.dtsi2
-rw-r--r--arch/arm/boot/dts/sun5i-a13.dtsi2
-rw-r--r--arch/arm/boot/dts/sun6i-a31.dtsi2
-rw-r--r--arch/arm/boot/dts/sun7i-a20.dtsi2
-rw-r--r--arch/arm/boot/dts/zynq-7000.dtsi6
-rw-r--r--arch/arm/mach-shmobile/Kconfig36
-rw-r--r--arch/arm/mach-u300/Makefile2
-rw-r--r--arch/arm/mach-u300/timer.c451
-rw-r--r--arch/arm/mach-zynq/Kconfig4
-rw-r--r--arch/arm/mach-zynq/common.c3
-rw-r--r--arch/sh/Kconfig76
-rw-r--r--arch/x86/kernel/hpet.c2
13 files changed, 60 insertions, 530 deletions
diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi
index d4d2763f4794..2ce61228d5f9 100644
--- a/arch/arm/boot/dts/sun4i-a10.dtsi
+++ b/arch/arm/boot/dts/sun4i-a10.dtsi
@@ -403,7 +403,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
index 79fd412005b0..29dd32d8e77e 100644
--- a/arch/arm/boot/dts/sun5i-a10s.dtsi
+++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
@@ -366,7 +366,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi
index c463fd730c91..e63bb383b43d 100644
--- a/arch/arm/boot/dts/sun5i-a13.dtsi
+++ b/arch/arm/boot/dts/sun5i-a13.dtsi
@@ -329,7 +329,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <22>;
clocks = <&osc24M>;
diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi
index 5256ad9be52c..996fff54c8a2 100644
--- a/arch/arm/boot/dts/sun6i-a31.dtsi
+++ b/arch/arm/boot/dts/sun6i-a31.dtsi
@@ -231,7 +231,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0xa0>;
interrupts = <0 18 4>,
<0 19 4>,
diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index 6f25cf559ad0..dddc8ac2d522 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -435,7 +435,7 @@
};
timer@01c20c00 {
- compatible = "allwinner,sun4i-timer";
+ compatible = "allwinner,sun4i-a10-timer";
reg = <0x01c20c00 0x90>;
interrupts = <0 22 4>,
<0 23 4>,
diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi
index 8b67b19392ec..789d0bacc110 100644
--- a/arch/arm/boot/dts/zynq-7000.dtsi
+++ b/arch/arm/boot/dts/zynq-7000.dtsi
@@ -24,6 +24,12 @@
device_type = "cpu";
reg = <0>;
clocks = <&clkc 3>;
+ operating-points = <
+ /* kHz uV */
+ 666667 1000000
+ 333334 1000000
+ 222223 1000000
+ >;
};
cpu@1 {
diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig
index 05fa505df585..f6db7dcae3f4 100644
--- a/arch/arm/mach-shmobile/Kconfig
+++ b/arch/arm/mach-shmobile/Kconfig
@@ -24,17 +24,21 @@ comment "Renesas ARM SoCs System Type"
config ARCH_EMEV2
bool "Emma Mobile EV2"
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
+ select SYS_SUPPORTS_SH_MTU2
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
comment "Renesas ARM SoCs Board Type"
@@ -68,6 +72,8 @@ config ARCH_SH7372
select ARM_CPU_SUSPEND if PM || CPU_IDLE
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_SH73A0
bool "SH-Mobile AG5 (R8A73A00)"
@@ -77,6 +83,8 @@ config ARCH_SH73A0
select I2C
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A73A4
bool "R-Mobile APE6 (R8A73A40)"
@@ -87,6 +95,8 @@ config ARCH_R8A73A4
select RENESAS_IRQC
select ARCH_HAS_CPUFREQ
select ARCH_HAS_OPP
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7740
bool "R-Mobile A1 (R8A77400)"
@@ -95,6 +105,8 @@ config ARCH_R8A7740
select CPU_V7
select SH_CLK_CPG
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7778
bool "R-Car M1A (R8A77781)"
@@ -104,6 +116,7 @@ config ARCH_R8A7778
select ARM_GIC
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7779
bool "R-Car H1 (R8A77790)"
@@ -114,6 +127,7 @@ config ARCH_R8A7779
select USB_ARCH_HAS_EHCI
select USB_ARCH_HAS_OHCI
select RENESAS_INTC_IRQPIN
+ select SYS_SUPPORTS_SH_TMU
config ARCH_R8A7790
bool "R-Car H2 (R8A77900)"
@@ -123,6 +137,7 @@ config ARCH_R8A7790
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_R8A7791
bool "R-Car M2 (R8A77910)"
@@ -132,6 +147,7 @@ config ARCH_R8A7791
select MIGHT_HAVE_PCI
select SH_CLK_CPG
select RENESAS_IRQC
+ select SYS_SUPPORTS_SH_CMT
config ARCH_EMEV2
bool "Emma Mobile EV2"
@@ -141,6 +157,7 @@ config ARCH_EMEV2
select MIGHT_HAVE_PCI
select USE_OF
select AUTO_ZRELADDR
+ select SYS_SUPPORTS_EM_STI
config ARCH_R7S72100
bool "RZ/A1H (R7S72100)"
@@ -148,6 +165,7 @@ config ARCH_R7S72100
select ARM_GIC
select CPU_V7
select SH_CLK_CPG
+ select SYS_SUPPORTS_SH_MTU2
comment "Renesas ARM SoCs Board Type"
@@ -321,24 +339,6 @@ config SHMOBILE_TIMER_HZ
want to select a HZ value such as 128 that can evenly divide RCLK.
A HZ value that does not divide evenly may cause timer drift.
-config SH_TIMER_CMT
- bool "CMT timer driver"
- default y
- help
- This enables build of the CMT timer driver.
-
-config SH_TIMER_TMU
- bool "TMU timer driver"
- default y
- help
- This enables build of the TMU timer driver.
-
-config EM_TIMER_STI
- bool "STI timer driver"
- default y
- help
- This enables build of the STI timer driver.
-
endmenu
endif
diff --git a/arch/arm/mach-u300/Makefile b/arch/arm/mach-u300/Makefile
index 0f362b64fb87..3ec74ac95bc1 100644
--- a/arch/arm/mach-u300/Makefile
+++ b/arch/arm/mach-u300/Makefile
@@ -2,7 +2,7 @@
# Makefile for the linux kernel, U300 machine.
#
-obj-y := core.o timer.o
+obj-y := core.o
obj-m :=
obj-n :=
obj- :=
diff --git a/arch/arm/mach-u300/timer.c b/arch/arm/mach-u300/timer.c
deleted file mode 100644
index fe08fd34c0ce..000000000000
--- a/arch/arm/mach-u300/timer.c
+++ /dev/null
@@ -1,451 +0,0 @@
-/*
- *
- * arch/arm/mach-u300/timer.c
- *
- *
- * Copyright (C) 2007-2009 ST-Ericsson AB
- * License terms: GNU General Public License (GPL) version 2
- * Timer COH 901 328, runs the OS timer interrupt.
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-#include <linux/interrupt.h>
-#include <linux/time.h>
-#include <linux/timex.h>
-#include <linux/clockchips.h>
-#include <linux/clocksource.h>
-#include <linux/types.h>
-#include <linux/io.h>
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/irq.h>
-#include <linux/delay.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/sched_clock.h>
-
-/* Generic stuff */
-#include <asm/mach/map.h>
-#include <asm/mach/time.h>
-
-/*
- * APP side special timer registers
- * This timer contains four timers which can fire an interrupt each.
- * OS (operating system) timer @ 32768 Hz
- * DD (device driver) timer @ 1 kHz
- * GP1 (general purpose 1) timer @ 1MHz
- * GP2 (general purpose 2) timer @ 1MHz
- */
-
-/* Reset OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_ROST (0x0000)
-#define U300_TIMER_APP_ROST_TIMER_RESET (0x00000000)
-/* Enable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_EOST (0x0004)
-#define U300_TIMER_APP_EOST_TIMER_ENABLE (0x00000000)
-/* Disable OS Timer 32bit (-/W) */
-#define U300_TIMER_APP_DOST (0x0008)
-#define U300_TIMER_APP_DOST_TIMER_DISABLE (0x00000000)
-/* OS Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SOSTM (0x000c)
-#define U300_TIMER_APP_SOSTM_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SOSTM_MODE_ONE_SHOT (0x00000001)
-/* OS Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTS (0x0010)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_OSTS_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_OSTS_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_OSTS_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_OSTS_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_OSTS_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_OSTS_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_OSTS_IRQ_PENDING_IND (0x00000080)
-/* OS Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_OSTCC (0x0014)
-/* OS Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_OSTTC (0x0018)
-/* OS Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIE (0x001c)
-#define U300_TIMER_APP_OSTIE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_OSTIE_IRQ_ENABLE (0x00000001)
-/* OS Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_OSTIA (0x0020)
-#define U300_TIMER_APP_OSTIA_IRQ_ACK (0x00000080)
-
-/* Reset DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_RDDT (0x0040)
-#define U300_TIMER_APP_RDDT_TIMER_RESET (0x00000000)
-/* Enable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_EDDT (0x0044)
-#define U300_TIMER_APP_EDDT_TIMER_ENABLE (0x00000000)
-/* Disable DD Timer 32bit (-/W) */
-#define U300_TIMER_APP_DDDT (0x0048)
-#define U300_TIMER_APP_DDDT_TIMER_DISABLE (0x00000000)
-/* DD Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SDDTM (0x004c)
-#define U300_TIMER_APP_SDDTM_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SDDTM_MODE_ONE_SHOT (0x00000001)
-/* DD Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTS (0x0050)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_DDTS_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_DDTS_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_DDTS_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_DDTS_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_DDTS_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_DDTS_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_DDTS_IRQ_PENDING_IND (0x00000080)
-/* DD Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_DDTCC (0x0054)
-/* DD Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_DDTTC (0x0058)
-/* DD Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIE (0x005c)
-#define U300_TIMER_APP_DDTIE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_DDTIE_IRQ_ENABLE (0x00000001)
-/* DD Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_DDTIA (0x0060)
-#define U300_TIMER_APP_DDTIA_IRQ_ACK (0x00000080)
-
-/* Reset GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT1 (0x0080)
-#define U300_TIMER_APP_RGPT1_TIMER_RESET (0x00000000)
-/* Enable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT1 (0x0084)
-#define U300_TIMER_APP_EGPT1_TIMER_ENABLE (0x00000000)
-/* Disable GP1 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT1 (0x0088)
-#define U300_TIMER_APP_DGPT1_TIMER_DISABLE (0x00000000)
-/* GP1 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT1M (0x008c)
-#define U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT (0x00000001)
-/* GP1 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1S (0x0090)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_GPT1S_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_GPT1S_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_GPT1S_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_GPT1S_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_GPT1S_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_GPT1S_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_GPT1S_IRQ_PENDING_IND (0x00000080)
-/* GP1 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT1CC (0x0094)
-/* GP1 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT1TC (0x0098)
-/* GP1 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IE (0x009c)
-#define U300_TIMER_APP_GPT1IE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_GPT1IE_IRQ_ENABLE (0x00000001)
-/* GP1 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT1IA (0x00a0)
-#define U300_TIMER_APP_GPT1IA_IRQ_ACK (0x00000080)
-
-/* Reset GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_RGPT2 (0x00c0)
-#define U300_TIMER_APP_RGPT2_TIMER_RESET (0x00000000)
-/* Enable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_EGPT2 (0x00c4)
-#define U300_TIMER_APP_EGPT2_TIMER_ENABLE (0x00000000)
-/* Disable GP2 Timer 32bit (-/W) */
-#define U300_TIMER_APP_DGPT2 (0x00c8)
-#define U300_TIMER_APP_DGPT2_TIMER_DISABLE (0x00000000)
-/* GP2 Timer Mode Register 32bit (-/W) */
-#define U300_TIMER_APP_SGPT2M (0x00cc)
-#define U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_SGPT2M_MODE_ONE_SHOT (0x00000001)
-/* GP2 Timer Status Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2S (0x00d0)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_MASK (0x0000000F)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_IDLE (0x00000001)
-#define U300_TIMER_APP_GPT2S_TIMER_STATE_ACTIVE (0x00000002)
-#define U300_TIMER_APP_GPT2S_ENABLE_IND (0x00000010)
-#define U300_TIMER_APP_GPT2S_MODE_MASK (0x00000020)
-#define U300_TIMER_APP_GPT2S_MODE_CONTINUOUS (0x00000000)
-#define U300_TIMER_APP_GPT2S_MODE_ONE_SHOT (0x00000020)
-#define U300_TIMER_APP_GPT2S_IRQ_ENABLED_IND (0x00000040)
-#define U300_TIMER_APP_GPT2S_IRQ_PENDING_IND (0x00000080)
-/* GP2 Timer Current Count Register 32bit (R/-) */
-#define U300_TIMER_APP_GPT2CC (0x00d4)
-/* GP2 Timer Terminal Count Register 32bit (R/W) */
-#define U300_TIMER_APP_GPT2TC (0x00d8)
-/* GP2 Timer Interrupt Enable Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IE (0x00dc)
-#define U300_TIMER_APP_GPT2IE_IRQ_DISABLE (0x00000000)
-#define U300_TIMER_APP_GPT2IE_IRQ_ENABLE (0x00000001)
-/* GP2 Timer Interrupt Acknowledge Register 32bit (-/W) */
-#define U300_TIMER_APP_GPT2IA (0x00e0)
-#define U300_TIMER_APP_GPT2IA_IRQ_ACK (0x00000080)
-
-/* Clock request control register - all four timers */
-#define U300_TIMER_APP_CRC (0x100)
-#define U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE (0x00000001)
-
-static void __iomem *u300_timer_base;
-
-struct u300_clockevent_data {
- struct clock_event_device cevd;
- unsigned ticks_per_jiffy;
-};
-
-/*
- * The u300_set_mode() function is always called first, if we
- * have oneshot timer active, the oneshot scheduling function
- * u300_set_next_event() is called immediately after.
- */
-static void u300_set_mode(enum clock_event_mode mode,
- struct clock_event_device *evt)
-{
- struct u300_clockevent_data *cevdata =
- container_of(evt, struct u300_clockevent_data, cevd);
-
- switch (mode) {
- case CLOCK_EVT_MODE_PERIODIC:
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /*
- * Set the periodic mode to a certain number of ticks per
- * jiffy.
- */
- writel(cevdata->ticks_per_jiffy,
- u300_timer_base + U300_TIMER_APP_GPT1TC);
- /*
- * Set continuous mode, so the timer keeps triggering
- * interrupts.
- */
- writel(U300_TIMER_APP_SGPT1M_MODE_CONTINUOUS,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable timer interrupts */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Then enable the OS timer again */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- break;
- case CLOCK_EVT_MODE_ONESHOT:
- /* Just break; here? */
- /*
- * The actual event will be programmed by the next event hook,
- * so we just set a dummy value somewhere at the end of the
- * universe here.
- */
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /*
- * Expire far in the future, u300_set_next_event() will be
- * called soon...
- */
- writel(0xFFFFFFFF, u300_timer_base + U300_TIMER_APP_GPT1TC);
- /* We run one shot per tick here! */
- writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable interrupts for this timer */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Enable timer */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- break;
- case CLOCK_EVT_MODE_UNUSED:
- case CLOCK_EVT_MODE_SHUTDOWN:
- /* Disable interrupts on GP1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- break;
- case CLOCK_EVT_MODE_RESUME:
- /* Ignore this call */
- break;
- }
-}
-
-/*
- * The app timer in one shot mode obviously has to be reprogrammed
- * in EXACTLY this sequence to work properly. Do NOT try to e.g. replace
- * the interrupt disable + timer disable commands with a reset command,
- * it will fail miserably. Apparently (and I found this the hard way)
- * the timer is very sensitive to the instruction order, though you don't
- * get that impression from the data sheet.
- */
-static int u300_set_next_event(unsigned long cycles,
- struct clock_event_device *evt)
-
-{
- /* Disable interrupts on GPT1 */
- writel(U300_TIMER_APP_GPT1IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Disable GP1 while we're reprogramming it. */
- writel(U300_TIMER_APP_DGPT1_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DGPT1);
- /* Reset the General Purpose timer 1. */
- writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RGPT1);
- /* IRQ in n * cycles */
- writel(cycles, u300_timer_base + U300_TIMER_APP_GPT1TC);
- /*
- * We run one shot per tick here! (This is necessary to reconfigure,
- * the timer will tilt if you don't!)
- */
- writel(U300_TIMER_APP_SGPT1M_MODE_ONE_SHOT,
- u300_timer_base + U300_TIMER_APP_SGPT1M);
- /* Enable timer interrupts */
- writel(U300_TIMER_APP_GPT1IE_IRQ_ENABLE,
- u300_timer_base + U300_TIMER_APP_GPT1IE);
- /* Then enable the OS timer again */
- writel(U300_TIMER_APP_EGPT1_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT1);
- return 0;
-}
-
-static struct u300_clockevent_data u300_clockevent_data = {
- /* Use general purpose timer 1 as clock event */
- .cevd = {
- .name = "GPT1",
- /* Reasonably fast and accurate clock event */
- .rating = 300,
- .features = CLOCK_EVT_FEAT_PERIODIC |
- CLOCK_EVT_FEAT_ONESHOT,
- .set_next_event = u300_set_next_event,
- .set_mode = u300_set_mode,
- },
-};
-
-/* Clock event timer interrupt handler */
-static irqreturn_t u300_timer_interrupt(int irq, void *dev_id)
-{
- struct clock_event_device *evt = &u300_clockevent_data.cevd;
- /* ACK/Clear timer IRQ for the APP GPT1 Timer */
-
- writel(U300_TIMER_APP_GPT1IA_IRQ_ACK,
- u300_timer_base + U300_TIMER_APP_GPT1IA);
- evt->event_handler(evt);
- return IRQ_HANDLED;
-}
-
-static struct irqaction u300_timer_irq = {
- .name = "U300 Timer Tick",
- .flags = IRQF_DISABLED | IRQF_TIMER | IRQF_IRQPOLL,
- .handler = u300_timer_interrupt,
-};
-
-/*
- * Override the global weak sched_clock symbol with this
- * local implementation which uses the clocksource to get some
- * better resolution when scheduling the kernel. We accept that
- * this wraps around for now, since it is just a relative time
- * stamp. (Inspired by OMAP implementation.)
- */
-
-static u64 notrace u300_read_sched_clock(void)
-{
- return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static unsigned long u300_read_current_timer(void)
-{
- return readl(u300_timer_base + U300_TIMER_APP_GPT2CC);
-}
-
-static struct delay_timer u300_delay_timer;
-
-/*
- * This sets up the system timers, clock source and clock event.
- */
-static void __init u300_timer_init_of(struct device_node *np)
-{
- unsigned int irq;
- struct clk *clk;
- unsigned long rate;
-
- u300_timer_base = of_iomap(np, 0);
- if (!u300_timer_base)
- panic("could not ioremap system timer\n");
-
- /* Get the IRQ for the GP1 timer */
- irq = irq_of_parse_and_map(np, 2);
- if (!irq)
- panic("no IRQ for system timer\n");
-
- pr_info("U300 GP1 timer @ base: %p, IRQ: %u\n", u300_timer_base, irq);
-
- /* Clock the interrupt controller */
- clk = of_clk_get(np, 0);
- BUG_ON(IS_ERR(clk));
- clk_prepare_enable(clk);
- rate = clk_get_rate(clk);
-
- u300_clockevent_data.ticks_per_jiffy = DIV_ROUND_CLOSEST(rate, HZ);
-
- sched_clock_register(u300_read_sched_clock, 32, rate);
-
- u300_delay_timer.read_current_timer = &u300_read_current_timer;
- u300_delay_timer.freq = rate;
- register_current_timer_delay(&u300_delay_timer);
-
- /*
- * Disable the "OS" and "DD" timers - these are designed for Symbian!
- * Example usage in cnh1601578 cpu subsystem pd_timer_app.c
- */
- writel(U300_TIMER_APP_CRC_CLOCK_REQUEST_ENABLE,
- u300_timer_base + U300_TIMER_APP_CRC);
- writel(U300_TIMER_APP_ROST_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_ROST);
- writel(U300_TIMER_APP_DOST_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DOST);
- writel(U300_TIMER_APP_RDDT_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RDDT);
- writel(U300_TIMER_APP_DDDT_TIMER_DISABLE,
- u300_timer_base + U300_TIMER_APP_DDDT);
-
- /* Reset the General Purpose timer 1. */
- writel(U300_TIMER_APP_RGPT1_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RGPT1);
-
- /* Set up the IRQ handler */
- setup_irq(irq, &u300_timer_irq);
-
- /* Reset the General Purpose timer 2 */
- writel(U300_TIMER_APP_RGPT2_TIMER_RESET,
- u300_timer_base + U300_TIMER_APP_RGPT2);
- /* Set this timer to run around forever */
- writel(0xFFFFFFFFU, u300_timer_base + U300_TIMER_APP_GPT2TC);
- /* Set continuous mode so it wraps around */
- writel(U300_TIMER_APP_SGPT2M_MODE_CONTINUOUS,
- u300_timer_base + U300_TIMER_APP_SGPT2M);
- /* Disable timer interrupts */
- writel(U300_TIMER_APP_GPT2IE_IRQ_DISABLE,
- u300_timer_base + U300_TIMER_APP_GPT2IE);
- /* Then enable the GP2 timer to use as a free running us counter */
- writel(U300_TIMER_APP_EGPT2_TIMER_ENABLE,
- u300_timer_base + U300_TIMER_APP_EGPT2);
-
- /* Use general purpose timer 2 as clock source */
- if (clocksource_mmio_init(u300_timer_base + U300_TIMER_APP_GPT2CC,
- "GPT2", rate, 300, 32, clocksource_mmio_readl_up))
- pr_err("timer: failed to initialize U300 clock source\n");
-
- /* Configure and register the clockevent */
- clockevents_config_and_register(&u300_clockevent_data.cevd, rate,
- 1, 0xffffffff);
-
- /*
- * TODO: init and register the rest of the timers too, they can be
- * used by hrtimers!
- */
-}
-
-CLOCKSOURCE_OF_DECLARE(u300_timer, "stericsson,u300-apptimer",
- u300_timer_init_of);
diff --git a/arch/arm/mach-zynq/Kconfig b/arch/arm/mach-zynq/Kconfig
index 6b04260aa142..f03e75bd0b2b 100644
--- a/arch/arm/mach-zynq/Kconfig
+++ b/arch/arm/mach-zynq/Kconfig
@@ -2,6 +2,8 @@ config ARCH_ZYNQ
bool "Xilinx Zynq ARM Cortex A9 Platform" if ARCH_MULTI_V7
select ARM_AMBA
select ARM_GIC
+ select ARCH_HAS_CPUFREQ
+ select ARCH_HAS_OPP
select COMMON_CLK
select CPU_V7
select GENERIC_CLOCKEVENTS
@@ -13,6 +15,6 @@ config ARCH_ZYNQ
select HAVE_SMP
select SPARSE_IRQ
select CADENCE_TTC_TIMER
- select ARM_GLOBAL_TIMER
+ select ARM_GLOBAL_TIMER if !CPU_FREQ
help
Support for Xilinx Zynq ARM Cortex A9 Platform
diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c
index 8c09a8393fb6..a39be8e80856 100644
--- a/arch/arm/mach-zynq/common.c
+++ b/arch/arm/mach-zynq/common.c
@@ -64,6 +64,8 @@ static struct platform_device zynq_cpuidle_device = {
*/
static void __init zynq_init_machine(void)
{
+ struct platform_device_info devinfo = { .name = "cpufreq-cpu0", };
+
/*
* 64KB way size, 8-way associativity, parity disabled
*/
@@ -72,6 +74,7 @@ static void __init zynq_init_machine(void)
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
platform_device_register(&zynq_cpuidle_device);
+ platform_device_register_full(&devinfo);
}
static void __init zynq_timer_init(void)
diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig
index 6357710753d5..364d204298fa 100644
--- a/arch/sh/Kconfig
+++ b/arch/sh/Kconfig
@@ -123,15 +123,6 @@ config SYS_SUPPORTS_NUMA
config SYS_SUPPORTS_PCI
bool
-config SYS_SUPPORTS_CMT
- bool
-
-config SYS_SUPPORTS_MTU2
- bool
-
-config SYS_SUPPORTS_TMU
- bool
-
config STACKTRACE_SUPPORT
def_bool y
@@ -191,14 +182,14 @@ config CPU_SH3
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
config CPU_SH4
bool
select CPU_HAS_INTEVT
select CPU_HAS_SR_RB
select CPU_HAS_FPU if !CPU_SH4AL_DSP
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SH4A
@@ -213,7 +204,7 @@ config CPU_SH4AL_DSP
config CPU_SH5
bool
select CPU_HAS_FPU
- select SYS_SUPPORTS_TMU
+ select SYS_SUPPORTS_SH_TMU
select SYS_SUPPORTS_HUGETLBFS if MMU
config CPU_SHX2
@@ -250,7 +241,7 @@ choice
config CPU_SUBTYPE_SH7619
bool "Support SH7619 processor"
select CPU_SH2
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
# SH-2A Processor Support
@@ -258,50 +249,50 @@ config CPU_SUBTYPE_SH7201
bool "Support SH7201 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_MTU2
config CPU_SUBTYPE_SH7203
bool "Support SH7203 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
config CPU_SUBTYPE_SH7206
bool "Support SH7206 processor"
select CPU_SH2A
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
config CPU_SUBTYPE_SH7263
bool "Support SH7263 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
config CPU_SUBTYPE_SH7264
bool "Support SH7264 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select PINCTRL
config CPU_SUBTYPE_SH7269
bool "Support SH7269 processor"
select CPU_SH2A
select CPU_HAS_FPU
- select SYS_SUPPORTS_CMT
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_CMT
+ select SYS_SUPPORTS_SH_MTU2
select PINCTRL
config CPU_SUBTYPE_MXG
bool "Support MX-G processor"
select CPU_SH2A
- select SYS_SUPPORTS_MTU2
+ select SYS_SUPPORTS_SH_MTU2
help
Select MX-G if running on an R8A03022BG part.
@@ -354,7 +345,7 @@ config CPU_SUBTYPE_SH7720
bool "Support SH7720 processor"
select CPU_SH3
select CPU_HAS_DSP
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select USB_ARCH_HAS_OHCI
select USB_OHCI_SH if USB_OHCI_HCD
@@ -366,7 +357,7 @@ config CPU_SUBTYPE_SH7721
bool "Support SH7721 processor"
select CPU_SH3
select CPU_HAS_DSP
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select USB_ARCH_HAS_OHCI
select USB_OHCI_SH if USB_OHCI_HCD
help
@@ -422,7 +413,7 @@ config CPU_SUBTYPE_SH7723
select CPU_SHX2
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
@@ -434,7 +425,7 @@ config CPU_SUBTYPE_SH7724
select CPU_SHX2
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
help
@@ -514,7 +505,7 @@ config CPU_SUBTYPE_SH7343
bool "Support SH7343 processor"
select CPU_SH4AL_DSP
select ARCH_SHMOBILE
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
config CPU_SUBTYPE_SH7722
bool "Support SH7722 processor"
@@ -523,7 +514,7 @@ config CPU_SUBTYPE_SH7722
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
select ARCH_WANT_OPTIONAL_GPIOLIB
select PINCTRL
@@ -534,7 +525,7 @@ config CPU_SUBTYPE_SH7366
select ARCH_SHMOBILE
select ARCH_SPARSEMEM_ENABLE
select SYS_SUPPORTS_NUMA
- select SYS_SUPPORTS_CMT
+ select SYS_SUPPORTS_SH_CMT
endchoice
@@ -567,27 +558,6 @@ source "arch/sh/boards/Kconfig"
menu "Timer and clock configuration"
-config SH_TIMER_TMU
- bool "TMU timer driver"
- depends on SYS_SUPPORTS_TMU
- default y
- help
- This enables the build of the TMU timer driver.
-
-config SH_TIMER_CMT
- bool "CMT timer driver"
- depends on SYS_SUPPORTS_CMT
- default y
- help
- This enables build of the CMT timer driver.
-
-config SH_TIMER_MTU2
- bool "MTU2 timer driver"
- depends on SYS_SUPPORTS_MTU2
- default y
- help
- This enables build of the MTU2 timer driver.
-
config SH_PCLK_FREQ
int "Peripheral clock frequency (in Hz)"
depends on SH_CLK_CPG_LEGACY
diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c
index da85a8e830a1..b91abfdd4931 100644
--- a/arch/x86/kernel/hpet.c
+++ b/arch/x86/kernel/hpet.c
@@ -699,7 +699,7 @@ static int hpet_cpuhp_notify(struct notifier_block *n,
/* FIXME: add schedule_work_on() */
schedule_delayed_work_on(cpu, &work.work, 0);
wait_for_completion(&work.complete);
- destroy_timer_on_stack(&work.work.timer);
+ destroy_delayed_work_on_stack(&work.work);
break;
case CPU_DEAD:
if (hdev) {