summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorRanjani Vaidyanathan <ra5478@freescale.com>2012-07-27 16:41:58 -0500
committerRanjani Vaidyanathan <ra5478@freescale.com>2012-07-30 20:13:33 -0500
commit51e5dcf9e8b61a0af97852769c4b7ae1c01951d3 (patch)
tree0003418ed696f7b0e61509b43cb930bcace2c2da /arch
parentba0ad582e921bb4208b75289f3ecc22f773feb6e (diff)
ENGR00218747 - MX6Q/MX6DL: WAIT mode support for MX6QTO1.2/MX6DLTO1.1
Add the new WAIT mode workaround added for MX6Q1.2 and MX6DLTO1.1. A new bit is added to CCM_CGPR (bit 17). This bit needs to be enabled for the WAIT mode fix to be active and needs to be disabled before the system enters STOP mode with power gating enabled. Fix WAIT mode bug when system is in low power IDLE mode: In low power IDLE mode (AHB @ 24MHz), switch ARM to run from 24MHz on MX6QTO1.1 and MX6DLTO1.0 chips when ARM core enters WAIT mode. We still need to use the ARM:IPG_CLK ratio of 12:5. Since IPG_CLK is at 12MHz, we need to run ARM below 28.8MHz. Signed-off-by: Ranjani Vaidyanathan <ra5478@freescale.com>
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/mach-mx6/bus_freq.c12
-rw-r--r--arch/arm/mach-mx6/clock.c19
-rwxr-xr-xarch/arm/mach-mx6/clock_mx6sl.c13
-rw-r--r--arch/arm/mach-mx6/cpu.c8
-rw-r--r--arch/arm/mach-mx6/crm_regs.h1
-rw-r--r--arch/arm/mach-mx6/mx6_wfi.S22
-rw-r--r--arch/arm/mach-mx6/system.c154
-rwxr-xr-xarch/arm/plat-mxc/cpufreq.c6
8 files changed, 155 insertions, 80 deletions
diff --git a/arch/arm/mach-mx6/bus_freq.c b/arch/arm/mach-mx6/bus_freq.c
index b1a0af0f3d35..12dea1474d9a 100644
--- a/arch/arm/mach-mx6/bus_freq.c
+++ b/arch/arm/mach-mx6/bus_freq.c
@@ -78,6 +78,8 @@ void set_ddr_freq(int ddr_freq);
extern int init_mmdc_settings(void);
extern struct cpu_op *(*get_cpu_op)(int *op);
extern int update_ddr_freq(int ddr_rate);
+extern int chip_rev;
+extern bool arm_mem_clked_in_wait;
struct mutex bus_freq_mutex;
@@ -128,7 +130,6 @@ static void reduce_bus_freq_handler(struct work_struct *work)
if (!cpu_is_mx6sl()) {
clk_enable(pll3);
-
if (lp_audio_freq) {
/* Need to ensure that PLL2_PFD_400M is kept ON. */
clk_enable(pll2_400);
@@ -149,6 +150,7 @@ static void reduce_bus_freq_handler(struct work_struct *work)
if (med_bus_freq_mode)
clk_disable(pll2_400);
+
clk_disable(pll3);
} else {
/* Set VDDSOC_CAP to 1.1V */
@@ -162,6 +164,8 @@ static void reduce_bus_freq_handler(struct work_struct *work)
udelay(150);
+ arm_mem_clked_in_wait = true;
+
/* Set periph_clk to be sourced from OSC_CLK */
/* Set MMDC clk to 25MHz. */
/* First need to set the divider before changing the parent */
@@ -305,6 +309,12 @@ int set_high_bus_freq(int high_bus_freq)
low_bus_freq_mode = 0;
audio_bus_freq_mode = 0;
+
+ /* Ensure that WAIT mode can be entered in high bus freq mode. */
+
+ if (cpu_is_mx6sl())
+ arm_mem_clked_in_wait = false;
+
mutex_unlock(&bus_freq_mutex);
return 0;
diff --git a/arch/arm/mach-mx6/clock.c b/arch/arm/mach-mx6/clock.c
index 0f87ce4d4ae1..34c26d4d3bc0 100644
--- a/arch/arm/mach-mx6/clock.c
+++ b/arch/arm/mach-mx6/clock.c
@@ -50,8 +50,6 @@ extern int lp_med_freq;
extern int wait_mode_arm_podf;
extern int lp_audio_freq;
extern int cur_arm_podf;
-extern bool arm_mem_clked_in_wait;
-extern bool enable_wait_mode;
void __iomem *apll_base;
@@ -1295,23 +1293,6 @@ static int _clk_arm_set_rate(struct clk *clk, unsigned long rate)
ipg_clk_rate = clk_get_rate(&ipg_clk);
max_arm_wait_clk = (12 * ipg_clk_rate) / 5;
wait_mode_arm_podf = parent_rate / max_arm_wait_clk;
- if (wait_mode_arm_podf > 7) {
- /* IPG_CLK is too low and we cannot get a ARM_CLK
- * that will satisfy the 12:5 ratio.
- * Use the mem_ipg_stop_mask bit to ensure clocks to ARM
- * memories are not gated during WAIT mode.
- * This bit is NOT available on MX6DQ TO1.1/TO1.0 and
- * MX6DL TO1.0.
- * Else disable entry to WAIT mode.
- */
- if ((mx6q_revision() > IMX_CHIP_REVISION_1_1) ||
- (mx6dl_revision() > IMX_CHIP_REVISION_1_0))
- arm_mem_clked_in_wait = true;
- else {
- enable_wait_mode = false;
- pr_info("wait mode is disabled due to ipg clock is too low\n");
- }
- }
if (div == 0)
div = 1;
diff --git a/arch/arm/mach-mx6/clock_mx6sl.c b/arch/arm/mach-mx6/clock_mx6sl.c
index 577a52277d68..887e6ad6fa96 100755
--- a/arch/arm/mach-mx6/clock_mx6sl.c
+++ b/arch/arm/mach-mx6/clock_mx6sl.c
@@ -52,7 +52,6 @@ extern int lp_high_freq;
extern int lp_med_freq;
extern int wait_mode_arm_podf;
extern int mx6q_revision(void);
-extern bool arm_mem_clked_in_wait;
extern int cur_arm_podf;
static void __iomem *apll_base;
@@ -1180,16 +1179,6 @@ static int _clk_arm_set_rate(struct clk *clk, unsigned long rate)
ipg_clk_rate = clk_get_rate(&ipg_clk);
max_arm_wait_clk = (12 * ipg_clk_rate) / 5;
wait_mode_arm_podf = parent_rate / max_arm_wait_clk;
- if (wait_mode_arm_podf > 7)
- /* IPG_CLK is too low and we cannot get a ARM_CLK
- * that will satisfy the 12:5 ratio.
- * Use the mem_ipg_stop_mask bit to ensure clocks
- * to ARM memories are not gated during WAIT mode.
- * Else disable entry to WAIT mode.
- */
- arm_mem_clked_in_wait = true;
- else
- arm_mem_clked_in_wait = false;
if (div == 0)
div = 1;
@@ -3964,7 +3953,7 @@ int __init mx6sl_clocks_init(unsigned long ckil, unsigned long osc,
/* keep correct count. */
clk_enable(&cpu_clk);
clk_enable(&periph_clk);
- clk_enable(&mmdc_ch1_axi_clk);
+ clk_enable(&mmdc_ch1_axi_clk[0]);
clk_tree_init();
diff --git a/arch/arm/mach-mx6/cpu.c b/arch/arm/mach-mx6/cpu.c
index 5d9749653988..9a60d9817ec3 100644
--- a/arch/arm/mach-mx6/cpu.c
+++ b/arch/arm/mach-mx6/cpu.c
@@ -35,6 +35,7 @@ struct cpu_op *(*get_cpu_op)(int *op);
bool enable_wait_mode = true;
u32 arm_max_freq = CPU_AT_1GHz;
bool mem_clk_on_in_wait;
+int chip_rev;
void __iomem *gpc_base;
void __iomem *ccm_base;
@@ -197,6 +198,13 @@ static int __init post_cpu_init(void)
(mx6dl_revision() < IMX_CHIP_REVISION_1_1))
mem_clk_on_in_wait = false;
+ if (cpu_is_mx6q())
+ chip_rev = mx6q_revision();
+ else if (cpu_is_mx6dl())
+ chip_rev = mx6dl_revision;
+ else
+ chip_rev = mx6sl_revision;
+
return 0;
}
postcore_initcall(post_cpu_init);
diff --git a/arch/arm/mach-mx6/crm_regs.h b/arch/arm/mach-mx6/crm_regs.h
index 2e1f3e4a32c4..5e03312b7fce 100644
--- a/arch/arm/mach-mx6/crm_regs.h
+++ b/arch/arm/mach-mx6/crm_regs.h
@@ -498,6 +498,7 @@
#define MXC_CCM_CGPR_MMDC_EXT_CLK_DIS (1 << 2)
#define MXC_CCM_CGPR_PMIC_DELAY_SCALER (1)
#define MXC_CCM_CGPR_MEM_IPG_STOP_MASK (1 << 1)
+#define MXC_CCM_CGPR_WAIT_MODE_FIX (1 << 17)
/* Define the bits in registers CCGRx */
#define MXC_CCM_CCGRx_CG_MASK 0x3
diff --git a/arch/arm/mach-mx6/mx6_wfi.S b/arch/arm/mach-mx6/mx6_wfi.S
index a616dabc4a80..afe7b9a3f6cd 100644
--- a/arch/arm/mach-mx6/mx6_wfi.S
+++ b/arch/arm/mach-mx6/mx6_wfi.S
@@ -28,7 +28,7 @@
*/
ENTRY(mx6_wait)
- push {r4, r5, r6, r7, r8}
+ push {r4, r5, r6, r7, r8, r9}
mov r7, r2 /* Store the arm_podf to be used. */
mov r6, r3
@@ -69,8 +69,11 @@ ENTRY(mx6_wait)
/* Check to see if we need to switch to 24MHz */
cmp r7, #0
bne use_podf
- ldr r6, =(1 << 16)
- str r6, [r2, #0x04]
+ /* Switch ARM to PLL1 output. */
+ /* PLL1 should already be in bypass state. */
+ ldr r6, [r8, #0x0C]
+ bic r6, r6, #0x04
+ str r6, [r8, #0x0C]
b cont
use_podf:
@@ -100,7 +103,9 @@ cont:
/* Switch to 24MHz or use ARM_PODF. */
cmp r7, #0x0
bne use_podf1
- str r6, [r2, #0x08]
+ /* Set pll1_sw_clk to run from STEP_CLK. */
+ orr r6, r6, #0x04
+ str r6, [r8, #0x0C]
b DO_WFI
use_podf1:
str r6, [r8, #0x10]
@@ -124,8 +129,11 @@ DO_WFI:
mov r4, #0x0
cmp r7, #0x0
bne use_podf2
- ldr r6, =(1 << 16)
- str r6, [r2, #0x08]
+ /* Set pll1_sw_clk to run from STEP_CLK. */
+ ldr r6, [r8, #0x0C]
+ orr r6, r6, #0x04
+ str r6, [r8, #0x0C]
+
b cont1
use_podf2:
@@ -137,7 +145,7 @@ cont1:
DONE:
- pop {r4,r5, r6, r7, r8}
+ pop {r4,r5, r6, r7, r8, r9}
/* Restore registers */
mov pc, lr
diff --git a/arch/arm/mach-mx6/system.c b/arch/arm/mach-mx6/system.c
index b9efbb64c8f9..ebc1ca1ee3cc 100644
--- a/arch/arm/mach-mx6/system.c
+++ b/arch/arm/mach-mx6/system.c
@@ -57,6 +57,7 @@ volatile unsigned int num_cpu_idle_lock = 0x0;
int wait_mode_arm_podf;
int cur_arm_podf;
bool arm_mem_clked_in_wait;
+void arch_idle_with_workaround(int cpu);
extern void mx6_wait(void *num_cpu_idle_lock, void *num_cpu_idle, \
int wait_arm_podf, int cur_arm_podf);
@@ -64,6 +65,7 @@ extern bool enable_wait_mode;
extern int low_bus_freq_mode;
extern int audio_bus_freq_mode;
extern bool mem_clk_on_in_wait;
+extern int chip_rev;
void gpc_set_wakeup(unsigned int irq[4])
{
@@ -201,6 +203,14 @@ void mxc_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
*/
reg = __raw_readl(MXC_CCM_CGPR);
reg |= MXC_CCM_CGPR_MEM_IPG_STOP_MASK;
+ if (!cpu_is_mx6sl()) {
+ /*
+ * For MX6QTO1.2 or later and MX6DLTO1.1 or later,
+ * ensure that the CCM_CGPR bit 17 is cleared before
+ * dormant mode is entered.
+ */
+ reg &= ~MXC_CCM_CGPR_WAIT_MODE_FIX;
+ }
__raw_writel(reg, MXC_CCM_CGPR);
}
}
@@ -209,56 +219,122 @@ void mxc_cpu_lp_set(enum mxc_cpu_pwr_mode mode)
extern int tick_broadcast_oneshot_active(void);
- void arch_idle(void)
+void arch_idle_single_core(void)
{
- if (enable_wait_mode) {
- u32 reg;
- int cpu = smp_processor_id();
- *((char *)(&num_cpu_idle_lock) + (char)cpu) = 0x0;
- mxc_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
- if (arm_mem_clked_in_wait || mem_clk_on_in_wait) {
+ u32 reg;
+
+ if (cpu_is_mx6dl() && chip_rev > IMX_CHIP_REVISION_1_0) {
+ /*
+ * MX6DLS TO1.1 has the HW fix for the WAIT mode issue.
+ * Ensure that the CGPR bit 17 is set to enable the fix.
+ */
+ reg = __raw_readl(MXC_CCM_CGPR);
+ reg |= MXC_CCM_CGPR_WAIT_MODE_FIX;
+ __raw_writel(reg, MXC_CCM_CGPR);
+
+ cpu_do_idle();
+ } else {
+ /*
+ * Implement the 12:5 ARM:IPG_CLK ratio
+ * workaround for the WAIT mode issue.
+ * We can directly use the divider to drop the ARM
+ * core freq in a single core environment.
+ * Set the ARM_PODF to get the max freq possible
+ * to avoid the WAIT mode issue when IPG is at 66MHz.
+ */
+ if (cpu_is_mx6sl()) {
reg = __raw_readl(MXC_CCM_CGPR);
- reg &= ~MXC_CCM_CGPR_MEM_IPG_STOP_MASK;
+ reg |= MXC_CCM_CGPR_MEM_IPG_STOP_MASK;
__raw_writel(reg, MXC_CCM_CGPR);
+ }
+ __raw_writel(wait_mode_arm_podf, MXC_CCM_CACRR);
+ while (__raw_readl(MXC_CCM_CDHIPR))
+ ;
+ cpu_do_idle();
- cpu_do_idle();
- } else if (num_possible_cpus() == 1) {
- /* We can directly use the divider to drop the ARM
- * core freq in a single core environment.
- */
- u32 podf = wait_mode_arm_podf;
- /* Set the ARM_PODF to get the max freq possible
- * to avoid the WAIT mode issue when IPG is at 66MHz.
- */
- if (low_bus_freq_mode)
- podf = 7;
+ __raw_writel(cur_arm_podf - 1, MXC_CCM_CACRR);
+ }
+}
- __raw_writel(podf, MXC_CCM_CACRR);
- while (__raw_readl(MXC_CCM_CDHIPR))
- ;
- cpu_do_idle();
+void arch_idle_with_workaround(cpu)
+{
+ u32 reg;
+ u32 podf = wait_mode_arm_podf;
+
+ *((char *)(&num_cpu_idle_lock) + (char)cpu) = 0x0;
+
+ if (low_bus_freq_mode || audio_bus_freq_mode)
+ /* In case when IPG is at 12MHz, we need to ensure that
+ * ARM is at 24MHz, as the max freq ARM can run at is
+ *~28.8MHz.
+ */
+ podf = 0;
+
+ mx6_wait((void *)&num_cpu_idle_lock,
+ (void *)&num_cpu_idle,
+ podf, cur_arm_podf - 1);
+
+}
+
+void arch_idle_multi_core(void)
+{
+ u32 reg;
+ int cpu = smp_processor_id();
- __raw_writel(cur_arm_podf - 1, MXC_CCM_CACRR);
- } else {
#ifdef CONFIG_LOCAL_TIMERS
- if (!tick_broadcast_oneshot_active()
- || !tick_oneshot_mode_active())
- return;
+ if (!tick_broadcast_oneshot_active()
+ || !tick_oneshot_mode_active())
+ return;
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_ENTER, &cpu);
#endif
- if (low_bus_freq_mode || audio_bus_freq_mode)
- mx6_wait((void *)&num_cpu_idle_lock,
- (void *)&num_cpu_idle,
- 7, cur_arm_podf - 1);
- else
- mx6_wait((void *)&num_cpu_idle_lock,
- (void *)&num_cpu_idle,
- wait_mode_arm_podf, cur_arm_podf - 1);
+ /* iMX6Q and iMX6DL */
+ if ((cpu_is_mx6q() && chip_rev >= IMX_CHIP_REVISION_1_2) ||
+ (cpu_is_mx6dl() && chip_rev >= IMX_CHIP_REVISION_1_1)) {
+ /*
+ * This code should only be executed on MX6QTO1.2 or later
+ * and MX6DL TO1.1 or later.
+ * These chips have the HW fix for the WAIT mode issue.
+ * Ensure that the CGPR bit 17 is set to enable the fix.
+ */
+
+ reg = __raw_readl(MXC_CCM_CGPR);
+ reg |= MXC_CCM_CGPR_WAIT_MODE_FIX;
+ __raw_writel(reg, MXC_CCM_CGPR);
+
+ cpu_do_idle();
+ } else
+ arch_idle_with_workaround(cpu);
#ifdef CONFIG_LOCAL_TIMERS
- clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
+ clockevents_notify(CLOCK_EVT_NOTIFY_BROADCAST_EXIT, &cpu);
#endif
- }
+
+}
+
+void arch_idle(void)
+{
+ if (enable_wait_mode) {
+ mxc_cpu_lp_set(WAIT_UNCLOCKED_POWER_OFF);
+ if ((mem_clk_on_in_wait || arm_mem_clked_in_wait)) {
+ u32 reg;
+ /*
+ * MX6SL, MX6Q (TO1.2 or later) and
+ * MX6DL (TO1.1 or later) have a bit in CCM_CGPR that
+ * when cleared keeps the clocks to memories ON
+ * when ARM is in WFI. This mode can be used when
+ * IPG clock is very low (12MHz) and the ARM:IPG ratio
+ * perhaps cannot be maintained.
+ */
+ reg = __raw_readl(MXC_CCM_CGPR);
+ reg &= ~MXC_CCM_CGPR_MEM_IPG_STOP_MASK;
+ __raw_writel(reg, MXC_CCM_CGPR);
+
+ cpu_do_idle();
+ } else if (num_possible_cpus() == 1)
+ /* iMX6SL or iMX6DLS */
+ arch_idle_single_core();
+ else
+ arch_idle_multi_core();
} else {
mxc_cpu_lp_set(WAIT_CLOCKED);
cpu_do_idle();
diff --git a/arch/arm/plat-mxc/cpufreq.c b/arch/arm/plat-mxc/cpufreq.c
index b31970c667d2..765f05e23712 100755
--- a/arch/arm/plat-mxc/cpufreq.c
+++ b/arch/arm/plat-mxc/cpufreq.c
@@ -56,6 +56,7 @@ extern struct regulator *cpu_regulator;
extern int dvfs_core_is_active;
extern struct cpu_op *(*get_cpu_op)(int *op);
extern int low_bus_freq_mode;
+extern int audio_bus_freq_mode;
extern int high_bus_freq_mode;
extern int set_low_bus_freq(void);
extern int set_high_bus_freq(int high_bus_speed);
@@ -85,7 +86,7 @@ int set_cpu_freq(int freq)
#endif
/*Set the voltage for the GP domain. */
if (freq > org_cpu_rate) {
- if (low_bus_freq_mode)
+ if (low_bus_freq_mode || audio_bus_freq_mode)
set_high_bus_freq(0);
ret = regulator_set_voltage(cpu_regulator, gp_volt,
gp_volt);
@@ -108,7 +109,8 @@ int set_cpu_freq(int freq)
printk(KERN_DEBUG "COULD NOT SET GP VOLTAGE!!!!\n");
return ret;
}
- if (low_freq_bus_used() && !low_bus_freq_mode)
+ if (low_freq_bus_used() &&
+ !(low_bus_freq_mode || audio_bus_freq_mode))
set_low_bus_freq();
}