OMAP2+: VC: support PMICs with separate voltage and command registers

The VC layer can support PMICs with separate voltage and command
registers by putting the different registers in the PRM_VC_SMPS_VOL_RA
and PRCM_VC_SMPS_CMD_RA registers respectively.

The PMIC data must supply at least a voltage register address
(volt_reg_addr).  The command register address (cmd_reg_addr) is
optional.  If the PMIC data does not supply a separate command
register address, the VC will use the voltage register address for both.

Signed-off-by: Kevin Hilman <khilman@ti.com>

3 files changed, 11 insertions, 8 deletions

diff --git a/arch/arm/mach-omap2/omap_twl.c b/arch/arm/mach-omap2/omap_twl.c
index 760487bcfca6..3249fe3c3c1d 100644
--- a/arch/arm/mach-omap2/omap_twl.c
+++ b/arch/arm/mach-omap2/omap_twl.c
@@ -158,7 +158,7 @@ static struct omap_volt_pmic_info omap3_mpu_volt_info = {
 	.vp_vddmax		= OMAP3430_VP1_VLIMITTO_VDDMAX,
 	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
-	.pmic_reg		= OMAP3_VDD_MPU_SR_CONTROL_REG,
+	.volt_reg_addr		= OMAP3_VDD_MPU_SR_CONTROL_REG,
 	.vsel_to_uv		= twl4030_vsel_to_uv,
 	.uv_to_vsel		= twl4030_uv_to_vsel,
 };
@@ -178,7 +178,7 @@ static struct omap_volt_pmic_info omap3_core_volt_info = {
 	.vp_vddmax		= OMAP3430_VP2_VLIMITTO_VDDMAX,
 	.vp_timeout_us		= OMAP3_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP3_SRI2C_SLAVE_ADDR,
-	.pmic_reg		= OMAP3_VDD_CORE_SR_CONTROL_REG,
+	.volt_reg_addr		= OMAP3_VDD_CORE_SR_CONTROL_REG,
 	.vsel_to_uv		= twl4030_vsel_to_uv,
 	.uv_to_vsel		= twl4030_uv_to_vsel,
 };
@@ -198,7 +198,7 @@ static struct omap_volt_pmic_info omap4_mpu_volt_info = {
 	.vp_vddmax		= OMAP4_VP_MPU_VLIMITTO_VDDMAX,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
-	.pmic_reg		= OMAP4_VDD_MPU_SR_VOLT_REG,
+	.volt_reg_addr		= OMAP4_VDD_MPU_SR_VOLT_REG,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -218,7 +218,7 @@ static struct omap_volt_pmic_info omap4_iva_volt_info = {
 	.vp_vddmax		= OMAP4_VP_IVA_VLIMITTO_VDDMAX,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
-	.pmic_reg		= OMAP4_VDD_IVA_SR_VOLT_REG,
+	.volt_reg_addr		= OMAP4_VDD_IVA_SR_VOLT_REG,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
@@ -238,7 +238,7 @@ static struct omap_volt_pmic_info omap4_core_volt_info = {
 	.vp_vddmax		= OMAP4_VP_CORE_VLIMITTO_VDDMAX,
 	.vp_timeout_us		= OMAP4_VP_VLIMITTO_TIMEOUT_US,
 	.i2c_slave_addr		= OMAP4_SRI2C_SLAVE_ADDR,
-	.pmic_reg		= OMAP4_VDD_CORE_SR_VOLT_REG,
+	.volt_reg_addr		= OMAP4_VDD_CORE_SR_VOLT_REG,
 	.vsel_to_uv		= twl6030_vsel_to_uv,
 	.uv_to_vsel		= twl6030_uv_to_vsel,
 };
diff --git a/arch/arm/mach-omap2/vc.c b/arch/arm/mach-omap2/vc.c
index b62363d9d2b7..1bdbe7c15612 100644
--- a/arch/arm/mach-omap2/vc.c
+++ b/arch/arm/mach-omap2/vc.c
@@ -115,7 +115,7 @@ int omap_vc_bypass_scale(struct voltagedomain *voltdm,
 	vc_valid = vc->common->valid;
 	vc_bypass_val_reg = vc->common->bypass_val_reg;
 	vc_bypass_value = (target_vsel << vc->common->data_shift) |
-			(vdd->pmic_info->pmic_reg <<
+			(vdd->pmic_info->volt_reg_addr <<
 			vc->common->regaddr_shift) |
 			(vdd->pmic_info->i2c_slave_addr <<
 			vc->common->slaveaddr_shift);
@@ -264,7 +264,7 @@ void __init omap_vc_init_channel(struct voltagedomain *voltdm)
 	vc_val = vdd->read_reg(vc->common->prm_mod,
 			       vc->common->smps_volra_reg);
 	vc_val &= ~vc->smps_volra_mask;
-	vc_val |= vdd->pmic_info->pmic_reg << vc->smps_volra_shift;
+	vc_val |= vdd->pmic_info->volt_reg_addr << vc->smps_volra_shift;
 	vdd->write_reg(vc_val, vc->common->prm_mod,
 		       vc->common->smps_volra_reg);
 
diff --git a/arch/arm/mach-omap2/voltage.h b/arch/arm/mach-omap2/voltage.h
index ea6bb98c63f8..5ca30fca114d 100644
--- a/arch/arm/mach-omap2/voltage.h
+++ b/arch/arm/mach-omap2/voltage.h
@@ -96,6 +96,8 @@ struct omap_volt_data {
  * @step_size:	PMIC voltage step size (in uv)
  * @vsel_to_uv:	PMIC API to convert vsel value to actual voltage in uV.
  * @uv_to_vsel:	PMIC API to convert voltage in uV to vsel value.
+ * @volt_reg_addr: voltage configuration register address
+ * @cmd_reg_addr: command (on, on-LP, ret, off) configuration register address
  */
 struct omap_volt_pmic_info {
 	int slew_rate;
@@ -112,7 +114,8 @@ struct omap_volt_pmic_info {
 	u8 vp_vddmax;
 	u8 vp_timeout_us;
 	u8 i2c_slave_addr;
-	u8 pmic_reg;
+	u8 volt_reg_addr;
+	u8 cmd_reg_addr;
 	unsigned long (*vsel_to_uv) (const u8 vsel);
 	u8 (*uv_to_vsel) (unsigned long uV);
 };