summaryrefslogtreecommitdiff
path: root/arch
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2016-01-08 16:11:05 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2016-01-08 16:11:05 -0800
commit44d8a7d5c1b4f9e99c5601217ce03a48412f9aac (patch)
tree2bfa80eb54b83faf163ca9f0bad576bd2bb22dba /arch
parent516c50cde604e93f094bb4c42a2cf81411c7a78d (diff)
parent841bcd2e5014f83ed99e88bd550645d8848ce19a (diff)
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann: "This is the final small set of ARM SoC bug fixes for linux-4.4, almost all regressions: OMAP: - data corruption on the Nokia N900 flash Allwinner: - Two defconfig change to get USB working again ARM Versatile: - Interrupt numbers gone bad after an older bug fix Nomadik: - Crashes from incorrect L2 cache settings VIA vt8500: - SD/MMC support on WM8650 never worked" * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: dts: vt8500: Add SDHC node to DTS file for WM8650 ARM: Fix broken USB support in multi_v7_defconfig for sunxi devices ARM: versatile: fix MMC/SD interrupt assignment ARM: nomadik: set latencies to 8 cycles ARM: OMAP2+: Fix onenand rate detection to avoid filesystem corruption ARM: Fix broken USB support in sunxi_defconfig
Diffstat (limited to 'arch')
-rw-r--r--arch/arm/boot/dts/ste-nomadik-stn8815.dtsi6
-rw-r--r--arch/arm/boot/dts/versatile-ab.dts10
-rw-r--r--arch/arm/boot/dts/versatile-pb.dts20
-rw-r--r--arch/arm/boot/dts/wm8650.dtsi9
-rw-r--r--arch/arm/configs/multi_v7_defconfig1
-rw-r--r--arch/arm/configs/sunxi_defconfig1
-rw-r--r--arch/arm/mach-omap2/gpmc-onenand.c14
7 files changed, 49 insertions, 12 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
index 314f59c12162..d0c743853318 100644
--- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
+++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi
@@ -25,9 +25,9 @@
cache-sets = <512>;
cache-line-size = <32>;
/* At full speed latency must be >=2 */
- arm,tag-latency = <2>;
- arm,data-latency = <2 2>;
- arm,dirty-latency = <2>;
+ arm,tag-latency = <8>;
+ arm,data-latency = <8 8>;
+ arm,dirty-latency = <8>;
};
mtu0: mtu@101e2000 {
diff --git a/arch/arm/boot/dts/versatile-ab.dts b/arch/arm/boot/dts/versatile-ab.dts
index 01f40197ea13..3279bf1a17a1 100644
--- a/arch/arm/boot/dts/versatile-ab.dts
+++ b/arch/arm/boot/dts/versatile-ab.dts
@@ -110,7 +110,11 @@
interrupt-parent = <&vic>;
interrupts = <31>; /* Cascaded to vic */
clear-mask = <0xffffffff>;
- valid-mask = <0xffc203f8>;
+ /*
+ * Valid interrupt lines mask according to
+ * table 4-36 page 4-50 of ARM DUI 0225D
+ */
+ valid-mask = <0x0760031b>;
};
dma@10130000 {
@@ -266,8 +270,8 @@
};
mmc@5000 {
compatible = "arm,pl180", "arm,primecell";
- reg = < 0x5000 0x1000>;
- interrupts-extended = <&vic 22 &sic 2>;
+ reg = <0x5000 0x1000>;
+ interrupts-extended = <&vic 22 &sic 1>;
clocks = <&xtal24mhz>, <&pclk>;
clock-names = "mclk", "apb_pclk";
};
diff --git a/arch/arm/boot/dts/versatile-pb.dts b/arch/arm/boot/dts/versatile-pb.dts
index b83137f66034..33a8eb28374e 100644
--- a/arch/arm/boot/dts/versatile-pb.dts
+++ b/arch/arm/boot/dts/versatile-pb.dts
@@ -5,6 +5,16 @@
compatible = "arm,versatile-pb";
amba {
+ /* The Versatile PB is using more SIC IRQ lines than the AB */
+ sic: intc@10003000 {
+ clear-mask = <0xffffffff>;
+ /*
+ * Valid interrupt lines mask according to
+ * figure 3-30 page 3-74 of ARM DUI 0224B
+ */
+ valid-mask = <0x7fe003ff>;
+ };
+
gpio2: gpio@101e6000 {
compatible = "arm,pl061", "arm,primecell";
reg = <0x101e6000 0x1000>;
@@ -67,6 +77,13 @@
};
fpga {
+ mmc@5000 {
+ /*
+ * Overrides the interrupt assignment from
+ * the Versatile AB board file.
+ */
+ interrupts-extended = <&sic 22 &sic 23>;
+ };
uart@9000 {
compatible = "arm,pl011", "arm,primecell";
reg = <0x9000 0x1000>;
@@ -86,7 +103,8 @@
mmc@b000 {
compatible = "arm,pl180", "arm,primecell";
reg = <0xb000 0x1000>;
- interrupts-extended = <&vic 23 &sic 2>;
+ interrupt-parent = <&sic>;
+ interrupts = <1>, <2>;
clocks = <&xtal24mhz>, <&pclk>;
clock-names = "mclk", "apb_pclk";
};
diff --git a/arch/arm/boot/dts/wm8650.dtsi b/arch/arm/boot/dts/wm8650.dtsi
index b1c59a766a13..e12213d16693 100644
--- a/arch/arm/boot/dts/wm8650.dtsi
+++ b/arch/arm/boot/dts/wm8650.dtsi
@@ -187,6 +187,15 @@
interrupts = <43>;
};
+ sdhc@d800a000 {
+ compatible = "wm,wm8505-sdhc";
+ reg = <0xd800a000 0x400>;
+ interrupts = <20>, <21>;
+ clocks = <&clksdhc>;
+ bus-width = <4>;
+ sdon-inverted;
+ };
+
fb: fb@d8050800 {
compatible = "wm,wm8505-fb";
reg = <0xd8050800 0x200>;
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 69a22fdb52a5..cd7b198fc79e 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -366,6 +366,7 @@ CONFIG_BATTERY_MAX17042=m
CONFIG_CHARGER_MAX14577=m
CONFIG_CHARGER_MAX77693=m
CONFIG_CHARGER_TPS65090=y
+CONFIG_AXP20X_POWER=m
CONFIG_POWER_RESET_AS3722=y
CONFIG_POWER_RESET_GPIO=y
CONFIG_POWER_RESET_GPIO_RESTART=y
diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig
index 3c36e16fcacf..b503a89441bf 100644
--- a/arch/arm/configs/sunxi_defconfig
+++ b/arch/arm/configs/sunxi_defconfig
@@ -84,6 +84,7 @@ CONFIG_SPI_SUN4I=y
CONFIG_SPI_SUN6I=y
CONFIG_GPIO_SYSFS=y
CONFIG_POWER_SUPPLY=y
+CONFIG_AXP20X_POWER=y
CONFIG_THERMAL=y
CONFIG_CPU_THERMAL=y
CONFIG_WATCHDOG=y
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
index 17a6f752a436..7b76ce01c21d 100644
--- a/arch/arm/mach-omap2/gpmc-onenand.c
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -149,8 +149,8 @@ static int omap2_onenand_get_freq(struct omap_onenand_platform_data *cfg,
freq = 104;
break;
default:
- freq = 54;
- break;
+ pr_err("onenand rate not detected, bad GPMC async timings?\n");
+ freq = 0;
}
return freq;
@@ -271,6 +271,11 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
struct gpmc_timings t;
int ret;
+ /*
+ * Note that we need to keep sync_write set for the call to
+ * omap2_onenand_set_async_mode() to work to detect the onenand
+ * supported clock rate for the sync timings.
+ */
if (gpmc_onenand_data->of_node) {
gpmc_read_settings_dt(gpmc_onenand_data->of_node,
&onenand_async);
@@ -281,12 +286,9 @@ static int omap2_onenand_setup_async(void __iomem *onenand_base)
else
gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
onenand_async.sync_read = false;
- onenand_async.sync_write = false;
}
}
- omap2_onenand_set_async_mode(onenand_base);
-
omap2_onenand_calc_async_timings(&t);
ret = gpmc_cs_program_settings(gpmc_onenand_data->cs, &onenand_async);
@@ -310,6 +312,8 @@ static int omap2_onenand_setup_sync(void __iomem *onenand_base, int *freq_ptr)
if (!freq) {
/* Very first call freq is not known */
freq = omap2_onenand_get_freq(gpmc_onenand_data, onenand_base);
+ if (!freq)
+ return -ENODEV;
set_onenand_cfg(onenand_base);
}