summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_sc1200.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2006-08-31 00:03:49 -0400
committerJeff Garzik <jeff@garzik.org>2006-08-31 00:03:49 -0400
commit85cd7251b9112e3dabeac9fd3b175601ca607241 (patch)
treeb33b80f54883e224a586661165bd0aee2c47ed39 /drivers/ata/pata_sc1200.c
parent481ff126e8d9be63809e7854badf815e54066eed (diff)
[libata #pata-drivers] Trim trailing whitespace.
Diffstat (limited to 'drivers/ata/pata_sc1200.c')
-rw-r--r--drivers/ata/pata_sc1200.c30
1 files changed, 15 insertions, 15 deletions
diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c
index 9b42b9a52423..4166c1a8a9e8 100644
--- a/drivers/ata/pata_sc1200.c
+++ b/drivers/ata/pata_sc1200.c
@@ -27,7 +27,7 @@
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
+ *
*/
#include <linux/kernel.h>
@@ -54,14 +54,14 @@
* Return the PCI bus clocking for the SC1200 chipset configuration
* in use. We return 0 for 33MHz 1 for 48MHz and 2 for 66Mhz
*/
-
+
static int sc1200_clock(void)
{
/* Magic registers that give us the chipset data */
u8 chip_id = inb(0x903C);
u8 silicon_rev = inb(0x903D);
u16 pci_clock;
-
+
if (chip_id == 0x04 && silicon_rev < SC1200_REV_B1)
return 0; /* 33 MHz mode */
@@ -83,7 +83,7 @@ static int sc1200_clock(void)
*
* Set our PIO requirements. This is fairly simple on the SC1200
*/
-
+
static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
static const u32 pio_timings[4][5] = {
@@ -97,11 +97,11 @@ static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
u32 format;
unsigned int reg = 0x40 + 0x10 * ap->port_no;
int mode = adev->pio_mode - XFER_PIO_0;
-
+
pci_read_config_dword(pdev, reg + 4, &format);
format >>= 31;
format += sc1200_clock();
- pci_write_config_dword(pdev, reg + 8 * adev->devno,
+ pci_write_config_dword(pdev, reg + 8 * adev->devno,
pio_timings[format][mode]);
}
@@ -113,7 +113,7 @@ static void sc1200_set_piomode(struct ata_port *ap, struct ata_device *adev)
* We cannot mix MWDMA and UDMA without reloading timings each switch
* master to slave.
*/
-
+
static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
static const u32 udma_timing[3][3] = {
@@ -121,13 +121,13 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{ 0x00932470, 0x00922260, 0x00922140 },
{ 0x009436A1, 0x00933481, 0x00923261 }
};
-
+
static const u32 mwdma_timing[3][3] = {
{ 0x00077771, 0x00012121, 0x00002020 },
{ 0x000BBBB2, 0x00024241, 0x00013131 },
{ 0x000FFFF3, 0x00035352, 0x00015151 }
};
-
+
int clock = sc1200_clock();
struct pci_dev *pdev = to_pci_dev(ap->host->dev);
unsigned int reg = 0x40 + 0x10 * ap->port_no;
@@ -138,10 +138,10 @@ static void sc1200_set_dmamode(struct ata_port *ap, struct ata_device *adev)
format = udma_timing[clock][mode - XFER_UDMA_0];
else
format = mwdma_timing[clock][mode - XFER_MW_DMA_0];
-
+
if (adev->devno == 0) {
u32 timings;
-
+
pci_read_config_dword(pdev, reg + 4, &timings);
timings &= 0x80000000UL;
timings |= format;
@@ -201,7 +201,7 @@ static struct ata_port_operations sc1200_port_ops = {
.set_piomode = sc1200_set_piomode,
.set_dmamode = sc1200_set_dmamode,
.mode_filter = ata_pci_default_filter,
-
+
.tf_load = ata_tf_load,
.tf_read = ata_tf_read,
.check_status = ata_check_status,
@@ -226,7 +226,7 @@ static struct ata_port_operations sc1200_port_ops = {
.port_start = ata_port_start,
.port_stop = ata_port_stop,
.host_stop = ata_host_stop
-};
+};
/**
* sc1200_init_one - Initialise an SC1200
@@ -236,7 +236,7 @@ static struct ata_port_operations sc1200_port_ops = {
* Just throw the needed data at the libata helper and it does all
* our work.
*/
-
+
static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
static struct ata_port_info info = {
@@ -248,7 +248,7 @@ static int sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
.port_ops = &sc1200_port_ops
};
static struct ata_port_info *port_info[2] = { &info, &info };
-
+
/* Can't enable port 2 yet, see top comments */
return ata_pci_init_one(dev, port_info, 1);
}