summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_scc.c
diff options
context:
space:
mode:
authorTejun Heo <htejun@gmail.com>2007-10-16 14:21:24 -0700
committerJeff Garzik <jeff@garzik.org>2007-10-29 06:15:27 -0400
commit88ff6eafbb2a1c55f0f0e2e16d72e7b10d8ae8a5 (patch)
treead6ab294a4f725540bfa24b7a451273b99fa71c1 /drivers/ata/pata_scc.c
parent054a5fbaceb2eb3a31ea843c1cf0b8e10b91478c (diff)
libata: implement ata_wait_after_reset()
On certain device/controller combination, 0xff status is asserted after reset and doesn't get cleared during 150ms post-reset wait. As 0xff status is interpreted as no device (for good reasons), this can lead to misdetection on such cases. This patch implements ata_wait_after_reset() which replaces the 150ms sleep and waits upto ATA_TMOUT_FF_WAIT if status is 0xff. ATA_TMOUT_FF_WAIT is currently 800ms which is enough for HHD424020F7SV00 to get detected but not enough for Quantum GoVault drive which is known to take upto 2s. Without parallel probing, spending 2s on 0xff port would incur too much delay on ata_piix's which use 0xff to indicate empty port and doesn't have SCR register, so GoVault needs to wait till parallel probing. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
Diffstat (limited to 'drivers/ata/pata_scc.c')
-rw-r--r--drivers/ata/pata_scc.c13
1 files changed, 2 insertions, 11 deletions
diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c
index 55576138faea..ea2ef9fc15be 100644
--- a/drivers/ata/pata_scc.c
+++ b/drivers/ata/pata_scc.c
@@ -570,17 +570,8 @@ static unsigned int scc_bus_softreset(struct ata_port *ap, unsigned int devmask,
udelay(20);
out_be32(ioaddr->ctl_addr, ap->ctl);
- /* spec mandates ">= 2ms" before checking status.
- * We wait 150ms, because that was the magic delay used for
- * ATAPI devices in Hale Landis's ATADRVR, for the period of time
- * between when the ATA command register is written, and then
- * status is checked. Because waiting for "a while" before
- * checking status is fine, post SRST, we perform this magic
- * delay here as well.
- *
- * Old drivers/ide uses the 2mS rule and then waits for ready
- */
- msleep(150);
+ /* wait a while before checking status */
+ ata_wait_after_reset(ap, deadline);
/* Before we perform post reset processing we want to see if
* the bus shows 0xFF because the odd clown forgets the D7