Merge branch 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Daniel writes:
Highlights of this -next round:
- ivb fdi B/C fixes
- hsw sprite/plane offset fixes from Damien
- unified dp/hdmi encoder for hsw, finally external dp support on hsw
  (Paulo)
- kill-agp and some other prep work in the gtt code from Ben
- some fb handling fixes from Ville
- massive pile of patches to align hsw VGA with the spec and make it
  actually work (Paulo)
- pile of workarounds from Jesse, mostly for vlv, but also some other
  related platforms
- start of a dev_priv reorg, that thing grew out of bounds and chaotic
- small bits&pieces all over the place, down to better error handling for
  load-detect on gen2 (Chris, Jani, Mika, Zhenyu, ...)

On top of the previous pile (just copypasta):
- tons of hsw dp prep patches form Paulo
- round scheduled work items and timers to nearest second (Chris)
- some hw workarounds (Jesse&Damien)
- vlv dp support and related fixups (Vijay et al.)
- basic haswell dp support, not yet wired up for external ports (Paulo)
- edp support (Paulo)
- tons of refactorings to prepare for the above (Paulo)
- panel rework, unifiying code between lvds and edp panels (Jani)
- panel fitter scaling modes (Jani + Yuly Novikov)
- panel power improvements, should now work without the BIOS setting it up
- extracting some dp helpers from radeon/i915 and move them to
  drm_dp_helper.c
- randome pile of workarounds (Damien, Ben, ...)
- some cleanups for the register restore code for suspend/resume
- secure batchbuffer support, should enable tear-free blits on gen6+
  Chris)
- random smaller fixlets and cleanups.

* 'for-airlied' of git://people.freedesktop.org/~danvet/drm-intel: (231 commits)
  drm/i915: Restore physical HWS_PGA after resume
  drm/i915: Report amount of usable graphics memory in MiB
  drm/i915/i2c: Track users of GMBUS force-bit
  drm/i915: Allocate the proper size for contexts.
  drm/i915: Update load-detect failure paths for modeset-rework
  drm/i915: Clear unused fields of mode for framebuffer creation
  drm/i915: Always calculate 8xx WM values based on a 32-bpp framebuffer
  drm/i915: Fix sparse warnings in from AGP kill code
  drm/i915: Missed lock change with rps lock
  drm/i915: Move the remaining gtt code
  drm/i915: flush system agent TLBs on SNB
  drm/i915: Kill off now unused gen6+ AGP code
  drm/i915: Calculate correct stolen size for GEN7+
  drm/i915: Stop using AGP layer for GEN6+
  drm/i915: drop the double-OP_STOREDW usage in blt_ring_flush
  drm/i915: don't rewrite the GTT on resume v4
  drm/i915: protect RPS/RC6 related accesses (including PCU) with a new mutex
  drm/i915: put ring frequency and turbo setup into a work queue v5
  drm/i915: don't block resume on fb console resume v2
  drm/i915: extract l3_parity substruct from dev_priv
  ...

1 files changed, 30 insertions, 17 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index b726b478a4f5..62a5b1154762 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -221,14 +221,20 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 	struct drm_i915_private *dev_priv = dev->dev_private;
 	u32 adpa;
 
-	adpa = ADPA_HOTPLUG_BITS;
+	if (HAS_PCH_SPLIT(dev))
+		adpa = ADPA_HOTPLUG_BITS;
+	else
+		adpa = 0;
+
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PHSYNC)
 		adpa |= ADPA_HSYNC_ACTIVE_HIGH;
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 
 	/* For CPT allow 3 pipe config, for others just use A or B */
-	if (HAS_PCH_CPT(dev))
+	if (HAS_PCH_LPT(dev))
+		; /* Those bits don't exist here */
+	else if (HAS_PCH_CPT(dev))
 		adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
 	else if (intel_crtc->pipe == 0)
 		adpa |= ADPA_PIPE_A_SELECT;
@@ -401,12 +407,16 @@ static int intel_crt_ddc_get_modes(struct drm_connector *connector,
 				struct i2c_adapter *adapter)
 {
 	struct edid *edid;
+	int ret;
 
 	edid = intel_crt_get_edid(connector, adapter);
 	if (!edid)
 		return 0;
 
-	return intel_connector_update_modes(connector, edid);
+	ret = intel_connector_update_modes(connector, edid);
+	kfree(edid);
+
+	return ret;
 }
 
 static bool intel_crt_detect_ddc(struct drm_connector *connector)
@@ -644,10 +654,22 @@ static int intel_crt_set_property(struct drm_connector *connector,
 static void intel_crt_reset(struct drm_connector *connector)
 {
 	struct drm_device *dev = connector->dev;
+	struct drm_i915_private *dev_priv = dev->dev_private;
 	struct intel_crt *crt = intel_attached_crt(connector);
 
-	if (HAS_PCH_SPLIT(dev))
+	if (HAS_PCH_SPLIT(dev)) {
+		u32 adpa;
+
+		adpa = I915_READ(PCH_ADPA);
+		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
+		adpa |= ADPA_HOTPLUG_BITS;
+		I915_WRITE(PCH_ADPA, adpa);
+		POSTING_READ(PCH_ADPA);
+
+		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
 		crt->force_hotplug_required = 1;
+	}
+
 }
 
 /*
@@ -749,7 +771,10 @@ void intel_crt_init(struct drm_device *dev)
 
 	crt->base.disable = intel_disable_crt;
 	crt->base.enable = intel_enable_crt;
-	crt->base.get_hw_state = intel_crt_get_hw_state;
+	if (IS_HASWELL(dev))
+		crt->base.get_hw_state = intel_ddi_get_hw_state;
+	else
+		crt->base.get_hw_state = intel_crt_get_hw_state;
 	intel_connector->get_hw_state = intel_connector_get_hw_state;
 
 	drm_encoder_helper_add(&crt->base.base, &crt_encoder_funcs);
@@ -766,18 +791,6 @@ void intel_crt_init(struct drm_device *dev)
 	 * Configure the automatic hotplug detection stuff
 	 */
 	crt->force_hotplug_required = 0;
-	if (HAS_PCH_SPLIT(dev)) {
-		u32 adpa;
-
-		adpa = I915_READ(PCH_ADPA);
-		adpa &= ~ADPA_CRT_HOTPLUG_MASK;
-		adpa |= ADPA_HOTPLUG_BITS;
-		I915_WRITE(PCH_ADPA, adpa);
-		POSTING_READ(PCH_ADPA);
-
-		DRM_DEBUG_KMS("pch crt adpa set to 0x%x\n", adpa);
-		crt->force_hotplug_required = 1;
-	}
 
 	dev_priv->hotplug_supported_mask |= CRT_HOTPLUG_INT_STATUS;
 }