summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_lvds.c
diff options
context:
space:
mode:
authorDaniel Vetter <daniel.vetter@ffwll.ch>2013-04-25 17:54:44 +0200
committerDaniel Vetter <daniel.vetter@ffwll.ch>2013-04-25 21:21:49 +0200
commitd8b322474941fa565ba5c58292ccc54be92cca41 (patch)
treedebd7ae36b9de06b0b93e6f23a524afe1aa702d0 /drivers/gpu/drm/i915/intel_lvds.c
parentc6bb353815c30c3f8a33b436314926706f4b6360 (diff)
drm/i915: use pipe_config for lvds dithering
Up to now we've relied on the bios to get this right for us. Let's try out whether our code has improved a bit, since we should dither always when the output bpp doesn't match the plane bpp. - gen5+ should be fine, since we only use the bios hint as an upgrade. - gen4 changes, since here dithering is still controlled in the lvds register. - gen2/3 has implicit dithering depeding upon whether you use 2 or 3 lvds pairs (which makes sense, since it only supports 8bpc pipe outpu configurations). - hsw doesn't support lvds. v2: Remove redudant dither setting. v3: Completly drop reliance on dev_priv->lvds_dither. v4: Enable dithering on gen2/3 only when we have a 18bpp panel, since up-dithering to a 24bpp panel is not supported by the hw. Spotted by Ville. v5: Also only enable lvds port dithering on gen4 for 18bpp modes. In practice this only excludes dithering a 10bpc plane down for a 24bpp lvds panel. Not something we truly care about. Again noticed by Ville. v6: Actually git add. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Diffstat (limited to 'drivers/gpu/drm/i915/intel_lvds.c')
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c15
1 files changed, 10 insertions, 5 deletions
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 563f5052fcfc..84085454b104 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -136,7 +136,10 @@ static void intel_pre_pll_enable_lvds(struct intel_encoder *encoder)
* special lvds dither control bit on pch-split platforms, dithering is
* only controlled through the PIPECONF reg. */
if (INTEL_INFO(dev)->gen == 4) {
- if (dev_priv->lvds_dither)
+ /* Bspec wording suggests that LVDS port dithering only exists
+ * for 18bpp panels. */
+ if (intel_crtc->config.dither &&
+ intel_crtc->config.pipe_bpp == 18)
temp |= LVDS_ENABLE_DITHER;
else
temp &= ~LVDS_ENABLE_DITHER;
@@ -335,7 +338,13 @@ static bool intel_lvds_compute_config(struct intel_encoder *intel_encoder,
DRM_DEBUG_KMS("forcing display bpp (was %d) to LVDS (%d)\n",
pipe_config->pipe_bpp, lvds_bpp);
pipe_config->pipe_bpp = lvds_bpp;
+
+ /* Make sure pre-965 set dither correctly for 18bpp panels. */
+ if (INTEL_INFO(dev)->gen < 4 && lvds_bpp == 18)
+ pfit_control |= PANEL_8TO6_DITHER_ENABLE;
+
}
+
/*
* We have timings from the BIOS for the panel, put them in
* to the adjusted mode. The CRTC will be set up for this mode,
@@ -470,10 +479,6 @@ out:
pfit_pgm_ratios = 0;
}
- /* Make sure pre-965 set dither correctly */
- if (INTEL_INFO(dev)->gen < 4 && dev_priv->lvds_dither)
- pfit_control |= PANEL_8TO6_DITHER_ENABLE;
-
if (pfit_control != lvds_encoder->pfit_control ||
pfit_pgm_ratios != lvds_encoder->pfit_pgm_ratios) {
lvds_encoder->pfit_control = pfit_control;