drm/msm: Add SDM845 DPU support

SDM845 SoC includes the Mobile Display Sub System (MDSS) which is a
top level wrapper consisting of Display Processing Unit (DPU) and
display peripheral modules such as Display Serial Interface (DSI)
and DisplayPort (DP).

MDSS functions essentially as a back-end composition engine. It blends
video and graphic images stored in the frame buffers and scans out the
composed image to a display sink (over DSI/DP).

The following diagram represents hardware blocks for a simple pipeline
(two planes are present on a given crtc which is connected to a DSI
connector):

       MDSS
      +---------------------------------+
      | +-----------------------------+ |
      | | DPU                         | |
      | |  +--------+  +--------+     | |
      | |  |  SSPP  |  |  SSPP  |     | |
      | |  +----+---+  +----+---+     | |
      | |       |           |         | |
      | |  +----v-----------v---+     | |
      | |  |  Layer Mixer (LM)  |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |    PingPong (PP)   |     | |
      | |  +--------------------+     | |
      | |  +--------------------+     | |
      | |  |  INTERFACE (VIDEO) |     | |
      | |  +---+----------------+     | |
      | +------|----------------------+ |
      |        |                        |
      | +------|---------------------+  |
      | |      | DISPLAY PERIPHERALS |  |
      | |  +---v-+      +-----+      |  |
      | |  | DSI |      |  DP |      |  |
      | |  +-----+      +-----+      |  |
      | +----------------------------+  |
      +---------------------------------+

The number of DPU sub-blocks (i.e. SSPPs, LMs, PP blocks and INTFs)
depends on SoC capabilities.

Overview of DPU sub-blocks:
---------------------------
* Source Surface Processor (SSPP):
 Refers to any of hardware pipes like ViG, DMA etc. Only ViG pipes are
 capable of performing format conversion, scaling and quality improvement
 for source surfaces.

* Layer Mixer (LM):
 Blend source surfaces together (in requested zorder)

* PingPong (PP):
 This block controls frame done interrupt output, EOL and EOF generation,
 overflow/underflow control.

* Display interface (INTF):
 Timing generator and interface connecting the display peripherals.

DRM components mapping to DPU architecture:
------------------------------------------
PLANEs maps to SSPPs
CRTC maps to LMs
Encoder maps to PPs, INTFs

Data flow setup:
---------------
MDSS hardware can support various data flows (e.g.):
  - Dual pipe: Output from two LMs combined to single display.
  - Split display: Output from two LMs connected to two separate
                   interfaces.

The hardware capabilities determine the number of concurrent data paths
possible. Any control path (i.e. pipeline w/i DPU) can be routed to any
of the hardware data paths. A given control path can be triggered,
flushed and controlled independently.

Changes in v3:
- Move msm_media_info.h from uapi to dpu/ subdir
- Remove preclose callback dpu (it's handled in core)
- Fix kbuild warnings with parent_ops
- Remove unused functions from dpu_core_irq
- Rename mdss_phys to mdss
- Rename mdp_phys address space to mdp
- Drop _phys from vbif and regdma binding names

Signed-off-by: Abhinav Kumar <abhinavk@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Chandan Uddaraju <chandanu@codeaurora.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sravanthi Kollukuduru <skolluku@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
[robclark minor rebase]
Signed-off-by: Rob Clark <robdclark@gmail.com>

1 files changed, 153 insertions, 0 deletions

diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.h
new file mode 100644
index 000000000000..5e98bba46af5
--- /dev/null
+++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_core_irq.h
@@ -0,0 +1,153 @@
+/* Copyright (c) 2015-2018, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __DPU_CORE_IRQ_H__
+#define __DPU_CORE_IRQ_H__
+
+#include "dpu_kms.h"
+#include "dpu_hw_interrupts.h"
+
+/**
+ * dpu_core_irq_preinstall - perform pre-installation of core IRQ handler
+ * @dpu_kms:		DPU handle
+ * @return:		none
+ */
+void dpu_core_irq_preinstall(struct dpu_kms *dpu_kms);
+
+/**
+ * dpu_core_irq_postinstall - perform post-installation of core IRQ handler
+ * @dpu_kms:		DPU handle
+ * @return:		0 if success; error code otherwise
+ */
+int dpu_core_irq_postinstall(struct dpu_kms *dpu_kms);
+
+/**
+ * dpu_core_irq_uninstall - uninstall core IRQ handler
+ * @dpu_kms:		DPU handle
+ * @return:		none
+ */
+void dpu_core_irq_uninstall(struct dpu_kms *dpu_kms);
+
+/**
+ * dpu_core_irq - core IRQ handler
+ * @dpu_kms:		DPU handle
+ * @return:		interrupt handling status
+ */
+irqreturn_t dpu_core_irq(struct dpu_kms *dpu_kms);
+
+/**
+ * dpu_core_irq_idx_lookup - IRQ helper function for lookup irq_idx from HW
+ *                      interrupt mapping table.
+ * @dpu_kms:		DPU handle
+ * @intr_type:		DPU HW interrupt type for lookup
+ * @instance_idx:	DPU HW block instance defined in dpu_hw_mdss.h
+ * @return:		irq_idx or -EINVAL when fail to lookup
+ */
+int dpu_core_irq_idx_lookup(
+		struct dpu_kms *dpu_kms,
+		enum dpu_intr_type intr_type,
+		uint32_t instance_idx);
+
+/**
+ * dpu_core_irq_enable - IRQ helper function for enabling one or more IRQs
+ * @dpu_kms:		DPU handle
+ * @irq_idxs:		Array of irq index
+ * @irq_count:		Number of irq_idx provided in the array
+ * @return:		0 for success enabling IRQ, otherwise failure
+ *
+ * This function increments count on each enable and decrements on each
+ * disable.  Interrupts is enabled if count is 0 before increment.
+ */
+int dpu_core_irq_enable(
+		struct dpu_kms *dpu_kms,
+		int *irq_idxs,
+		uint32_t irq_count);
+
+/**
+ * dpu_core_irq_disable - IRQ helper function for disabling one of more IRQs
+ * @dpu_kms:		DPU handle
+ * @irq_idxs:		Array of irq index
+ * @irq_count:		Number of irq_idx provided in the array
+ * @return:		0 for success disabling IRQ, otherwise failure
+ *
+ * This function increments count on each enable and decrements on each
+ * disable.  Interrupts is disabled if count is 0 after decrement.
+ */
+int dpu_core_irq_disable(
+		struct dpu_kms *dpu_kms,
+		int *irq_idxs,
+		uint32_t irq_count);
+
+/**
+ * dpu_core_irq_read - IRQ helper function for reading IRQ status
+ * @dpu_kms:		DPU handle
+ * @irq_idx:		irq index
+ * @clear:		True to clear the irq after read
+ * @return:		non-zero if irq detected; otherwise no irq detected
+ */
+u32 dpu_core_irq_read(
+		struct dpu_kms *dpu_kms,
+		int irq_idx,
+		bool clear);
+
+/**
+ * dpu_core_irq_register_callback - For registering callback function on IRQ
+ *                             interrupt
+ * @dpu_kms:		DPU handle
+ * @irq_idx:		irq index
+ * @irq_cb:		IRQ callback structure, containing callback function
+ *			and argument. Passing NULL for irq_cb will unregister
+ *			the callback for the given irq_idx
+ *			This must exist until un-registration.
+ * @return:		0 for success registering callback, otherwise failure
+ *
+ * This function supports registration of multiple callbacks for each interrupt.
+ */
+int dpu_core_irq_register_callback(
+		struct dpu_kms *dpu_kms,
+		int irq_idx,
+		struct dpu_irq_callback *irq_cb);
+
+/**
+ * dpu_core_irq_unregister_callback - For unregistering callback function on IRQ
+ *                             interrupt
+ * @dpu_kms:		DPU handle
+ * @irq_idx:		irq index
+ * @irq_cb:		IRQ callback structure, containing callback function
+ *			and argument. Passing NULL for irq_cb will unregister
+ *			the callback for the given irq_idx
+ *			This must match with registration.
+ * @return:		0 for success registering callback, otherwise failure
+ *
+ * This function supports registration of multiple callbacks for each interrupt.
+ */
+int dpu_core_irq_unregister_callback(
+		struct dpu_kms *dpu_kms,
+		int irq_idx,
+		struct dpu_irq_callback *irq_cb);
+
+/**
+ * dpu_debugfs_core_irq_init - register core irq debugfs
+ * @dpu_kms: pointer to kms
+ * @parent: debugfs directory root
+ * @Return: 0 on success
+ */
+int dpu_debugfs_core_irq_init(struct dpu_kms *dpu_kms,
+		struct dentry *parent);
+
+/**
+ * dpu_debugfs_core_irq_destroy - deregister core irq debugfs
+ * @dpu_kms: pointer to kms
+ */
+void dpu_debugfs_core_irq_destroy(struct dpu_kms *dpu_kms);
+
+#endif /* __DPU_CORE_IRQ_H__ */