Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm merge window pull request, changes all over the
  place, mostly normal levels of churn.

  Highlights:

  Core drm:
     More cleanups, fix race on connector/encoder naming, docs updates,
     object locking rework in prep for atomic modeset

  i915:
     mipi DSI support, valleyview power fixes, cursor size fixes,
     execlist refactoring, vblank improvements, userptr support, OOM
     handling improvements

  radeon:
     GPUVM tuning and large page size support, gart fixes, deep color
     HDMI support, HDMI audio cleanups

  nouveau:
     - displayport rework should fix lots of issues
     - initial gk20a support
     - gk110b support
     - gk208 fixes

  exynos:
     probe order fixes, HDMI changes, IPP consolidation

  msm:
     debugfs updates, misc fixes

  ast:
     ast2400 support, sync with UMS driver

  tegra:
     cleanups, hdmi + hw cursor for Tegra 124.

  panel:
     fixes existing panels add some new ones.

  ipuv3:
     moved from staging to drivers/gpu"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (761 commits)
  drm/nouveau/disp/dp: fix tmds passthrough on dp connector
  drm/nouveau/dp: probe dpcd to determine connectedness
  drm/nv50-: trigger update after all connectors disabled
  drm/nv50-: prepare for attaching a SOR to multiple heads
  drm/gf119-/disp: fix debug output on update failure
  drm/nouveau/disp/dp: make use of postcursor when its available
  drm/g94-/disp/dp: take max pullup value across all lanes
  drm/nouveau/bios/dp: parse lane postcursor data
  drm/nouveau/dp: fix support for dpms
  drm/nouveau: register a drm_dp_aux channel for each dp connector
  drm/g94-/disp: add method to power-off dp lanes
  drm/nouveau/disp/dp: maintain link in response to hpd signal
  drm/g94-/disp: bash and wait for something after changing lane power regs
  drm/nouveau/disp/dp: split link config/power into two steps
  drm/nv50/disp: train PIOR-attached DP from second supervisor
  drm/nouveau/disp/dp: make use of existing output data for link training
  drm/gf119/disp: start removing direct vbios parsing from supervisor
  drm/nv50/disp: start removing direct vbios parsing from supervisor
  drm/nouveau/disp/dp: maintain receiver caps in response to hpd signal
  drm/nouveau/disp/dp: create subclass for dp outputs
  ...

1 files changed, 10 insertions, 1 deletions

diff --git a/drivers/gpu/drm/radeon/radeon_i2c.c b/drivers/gpu/drm/radeon/radeon_i2c.c
index 7b944142a9fd..add622008407 100644
--- a/drivers/gpu/drm/radeon/radeon_i2c.c
+++ b/drivers/gpu/drm/radeon/radeon_i2c.c
@@ -94,6 +94,8 @@ static int pre_xfer(struct i2c_adapter *i2c_adap)
 	struct radeon_i2c_bus_rec *rec = &i2c->rec;
 	uint32_t temp;
 
+	mutex_lock(&i2c->mutex);
+
 	/* RV410 appears to have a bug where the hw i2c in reset
 	 * holds the i2c port in a bad state - switch hw i2c away before
 	 * doing DDC - do this for all r200s/r300s/r400s for safety sake
@@ -170,6 +172,8 @@ static void post_xfer(struct i2c_adapter *i2c_adap)
 	temp = RREG32(rec->mask_data_reg) & ~rec->mask_data_mask;
 	WREG32(rec->mask_data_reg, temp);
 	temp = RREG32(rec->mask_data_reg);
+
+	mutex_unlock(&i2c->mutex);
 }
 
 static int get_clock(void *i2c_priv)
@@ -813,6 +817,8 @@ static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
 	struct radeon_i2c_bus_rec *rec = &i2c->rec;
 	int ret = 0;
 
+	mutex_lock(&i2c->mutex);
+
 	switch (rdev->family) {
 	case CHIP_R100:
 	case CHIP_RV100:
@@ -879,6 +885,8 @@ static int radeon_hw_i2c_xfer(struct i2c_adapter *i2c_adap,
 		break;
 	}
 
+	mutex_unlock(&i2c->mutex);
+
 	return ret;
 }
 
@@ -919,6 +927,7 @@ struct radeon_i2c_chan *radeon_i2c_create(struct drm_device *dev,
 	i2c->adapter.dev.parent = &dev->pdev->dev;
 	i2c->dev = dev;
 	i2c_set_adapdata(&i2c->adapter, i2c);
+	mutex_init(&i2c->mutex);
 	if (rec->mm_i2c ||
 	    (rec->hw_capable &&
 	     radeon_hw_i2c &&
@@ -979,7 +988,7 @@ void radeon_i2c_destroy(struct radeon_i2c_chan *i2c)
 		return;
 	i2c_del_adapter(&i2c->adapter);
 	if (i2c->has_aux)
-		drm_dp_aux_unregister_i2c_bus(&i2c->aux);
+		drm_dp_aux_unregister(&i2c->aux);
 	kfree(i2c);
 }