summaryrefslogtreecommitdiff
path: root/drivers/hwmon
diff options
context:
space:
mode:
authorLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-30 22:57:33 -0300
committerLucas De Marchi <lucas.demarchi@profusion.mobi>2011-03-31 11:26:23 -0300
commit25985edcedea6396277003854657b5f3cb31a628 (patch)
treef026e810210a2ee7290caeb737c23cb6472b7c38 /drivers/hwmon
parent6aba74f2791287ec407e0f92487a725a25908067 (diff)
Fix common misspellings
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
Diffstat (limited to 'drivers/hwmon')
-rw-r--r--drivers/hwmon/abituguru.c2
-rw-r--r--drivers/hwmon/abituguru3.c2
-rw-r--r--drivers/hwmon/adm1026.c2
-rw-r--r--drivers/hwmon/lm85.c2
-rw-r--r--drivers/hwmon/lm90.c2
-rw-r--r--drivers/hwmon/sht15.c6
-rw-r--r--drivers/hwmon/tmp102.c2
-rw-r--r--drivers/hwmon/w83791d.c2
-rw-r--r--drivers/hwmon/w83792d.c2
-rw-r--r--drivers/hwmon/w83793.c2
10 files changed, 12 insertions, 12 deletions
diff --git a/drivers/hwmon/abituguru.c b/drivers/hwmon/abituguru.c
index 0e05aa179eaa..e7d4c4687f02 100644
--- a/drivers/hwmon/abituguru.c
+++ b/drivers/hwmon/abituguru.c
@@ -1422,7 +1422,7 @@ static int __init abituguru_detect(void)
at DATA and 0xAC, when this driver has already been loaded once
DATA will hold 0x08. For most uGuru's CMD will hold 0xAC in either
scenario but some will hold 0x00.
- Some uGuru's initally hold 0x09 at DATA and will only hold 0x08
+ Some uGuru's initially hold 0x09 at DATA and will only hold 0x08
after reading CMD first, so CMD must be read first! */
u8 cmd_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_CMD);
u8 data_val = inb_p(ABIT_UGURU_BASE + ABIT_UGURU_DATA);
diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c
index 034cebfcd273..e89d572e3320 100644
--- a/drivers/hwmon/abituguru3.c
+++ b/drivers/hwmon/abituguru3.c
@@ -151,7 +151,7 @@ struct abituguru3_data {
/* Pointer to the sensors info for the detected motherboard */
const struct abituguru3_sensor_info *sensors;
- /* The abituguru3 supports upto 48 sensors, and thus has registers
+ /* The abituguru3 supports up to 48 sensors, and thus has registers
sets for 48 sensors, for convienence reasons / simplicity of the
code we always read and store all registers for all 48 sensors */
diff --git a/drivers/hwmon/adm1026.c b/drivers/hwmon/adm1026.c
index be0fdd58aa29..0531867484f4 100644
--- a/drivers/hwmon/adm1026.c
+++ b/drivers/hwmon/adm1026.c
@@ -175,7 +175,7 @@ static u16 ADM1026_REG_TEMP_OFFSET[] = { 0x1e, 0x6e, 0x6f };
* these macros are called: arguments may be evaluated more than once.
*/
-/* IN are scaled acording to built-in resistors. These are the
+/* IN are scaled according to built-in resistors. These are the
* voltages corresponding to 3/4 of full scale (192 or 0xc0)
* NOTE: The -12V input needs an additional factor to account
* for the Vref pullup resistor.
diff --git a/drivers/hwmon/lm85.c b/drivers/hwmon/lm85.c
index cf47e6e476ed..250d099ca398 100644
--- a/drivers/hwmon/lm85.c
+++ b/drivers/hwmon/lm85.c
@@ -130,7 +130,7 @@ enum chips {
these macros are called: arguments may be evaluated more than once.
*/
-/* IN are scaled acording to built-in resistors */
+/* IN are scaled according to built-in resistors */
static const int lm85_scaling[] = { /* .001 Volts */
2500, 2250, 3300, 5000, 12000,
3300, 1500, 1800 /*EMC6D100*/
diff --git a/drivers/hwmon/lm90.c b/drivers/hwmon/lm90.c
index 812781c655a7..c43b4e9f96a9 100644
--- a/drivers/hwmon/lm90.c
+++ b/drivers/hwmon/lm90.c
@@ -356,7 +356,7 @@ static int lm90_read16(struct i2c_client *client, u8 regh, u8 regl, u16 *value)
/*
* There is a trick here. We have to read two registers to have the
* sensor temperature, but we have to beware a conversion could occur
- * inbetween the readings. The datasheet says we should either use
+ * between the readings. The datasheet says we should either use
* the one-shot conversion register, which we don't want to do
* (disables hardware monitoring) or monitor the busy bit, which is
* impossible (we can't read the values and monitor that bit at the
diff --git a/drivers/hwmon/sht15.c b/drivers/hwmon/sht15.c
index 1a9c32d6893a..f4e617adb220 100644
--- a/drivers/hwmon/sht15.c
+++ b/drivers/hwmon/sht15.c
@@ -52,7 +52,7 @@
#define SHT15_TSU 150 /* data setup time */
/**
- * struct sht15_temppair - elements of voltage dependant temp calc
+ * struct sht15_temppair - elements of voltage dependent temp calc
* @vdd: supply voltage in microvolts
* @d1: see data sheet
*/
@@ -251,7 +251,7 @@ static inline int sht15_update_single_val(struct sht15_data *data,
enable_irq(gpio_to_irq(data->pdata->gpio_data));
if (gpio_get_value(data->pdata->gpio_data) == 0) {
disable_irq_nosync(gpio_to_irq(data->pdata->gpio_data));
- /* Only relevant if the interrupt hasn't occured. */
+ /* Only relevant if the interrupt hasn't occurred. */
if (!atomic_read(&data->interrupt_handled))
schedule_work(&data->read_work);
}
@@ -452,7 +452,7 @@ static void sht15_bh_read_data(struct work_struct *work_s)
*/
atomic_set(&data->interrupt_handled, 0);
enable_irq(gpio_to_irq(data->pdata->gpio_data));
- /* If still not occured or another handler has been scheduled */
+ /* If still not occurred or another handler has been scheduled */
if (gpio_get_value(data->pdata->gpio_data)
|| atomic_read(&data->interrupt_handled))
return;
diff --git a/drivers/hwmon/tmp102.c b/drivers/hwmon/tmp102.c
index 93187c3cb5e7..5bd194968801 100644
--- a/drivers/hwmon/tmp102.c
+++ b/drivers/hwmon/tmp102.c
@@ -166,7 +166,7 @@ static int __devinit tmp102_probe(struct i2c_client *client,
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_WORD_DATA)) {
- dev_err(&client->dev, "adapter doesnt support SMBus word "
+ dev_err(&client->dev, "adapter doesn't support SMBus word "
"transactions\n");
return -ENODEV;
}
diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c
index 400a88bde278..17cf1ab95521 100644
--- a/drivers/hwmon/w83791d.c
+++ b/drivers/hwmon/w83791d.c
@@ -556,7 +556,7 @@ static ssize_t show_fan_div(struct device *dev, struct device_attribute *attr,
/* Note: we save and restore the fan minimum here, because its value is
determined in part by the fan divisor. This follows the principle of
- least suprise; the user doesn't expect the fan minimum to change just
+ least surprise; the user doesn't expect the fan minimum to change just
because the divisor changed. */
static ssize_t store_fan_div(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
diff --git a/drivers/hwmon/w83792d.c b/drivers/hwmon/w83792d.c
index 63841f8cec07..f3e7130c4cda 100644
--- a/drivers/hwmon/w83792d.c
+++ b/drivers/hwmon/w83792d.c
@@ -244,7 +244,7 @@ FAN_TO_REG(long rpm, int div)
#define TEMP1_TO_REG(val) (SENSORS_LIMIT(((val) < 0 ? (val)+0x100*1000 \
: (val)) / 1000, 0, 0xff))
#define TEMP1_FROM_REG(val) (((val) & 0x80 ? (val)-0x100 : (val)) * 1000)
-/* for temp2 and temp3, because they need addtional resolution */
+/* for temp2 and temp3, because they need additional resolution */
#define TEMP_ADD_FROM_REG(val1, val2) \
((((val1) & 0x80 ? (val1)-0x100 \
: (val1)) * 1000) + ((val2 & 0x80) ? 500 : 0))
diff --git a/drivers/hwmon/w83793.c b/drivers/hwmon/w83793.c
index e3bdedfb5347..854f9117f1aa 100644
--- a/drivers/hwmon/w83793.c
+++ b/drivers/hwmon/w83793.c
@@ -1921,7 +1921,7 @@ static void w83793_update_nonvolatile(struct device *dev)
struct w83793_data *data = i2c_get_clientdata(client);
int i, j;
/*
- They are somewhat "stable" registers, and to update them everytime
+ They are somewhat "stable" registers, and to update them every time
takes so much time, it's just not worthy. Update them in a long
interval to avoid exception.
*/