summaryrefslogtreecommitdiff
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2010-03-07 15:56:25 -0800
committerLinus Torvalds <torvalds@linux-foundation.org>2010-03-07 15:56:25 -0800
commitdd04265b028c00c365a78f9ff78a05e217f98656 (patch)
tree4df2ce8ca3a2b8fcf5742718ecb90abe68666ffb /drivers/i2c/busses
parent6dc3eb5c1f96641cda7056aa34393e317076d6cf (diff)
parent3f4ae8605261e6f71e721e026bc18cb1851a7276 (diff)
Merge branch 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux
* 'for-linus/i2c' of git://git.fluff.org/bjdooks/linux: i2c: Add support for Xilinx XPS IIC Bus Interface i2c: omap: Add support for 16-bit registers i2c-pnx: fix setting start/stop condition powerpc: doc/dts-bindings: update doc of FSL I2C bindings i2c-mpc: add support for the MPC512x processors from Freescale i2c-mpc: rename "setclock" initialization functions to "setup" i2c-mpc: use __devinit[data] for initialization functions and data i2c/imx: don't add probe function to the driver struct i2c: Add support for Ux500/Nomadik I2C controller
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig24
-rw-r--r--drivers/i2c/busses/Makefile2
-rw-r--r--drivers/i2c/busses/i2c-imx.c1
-rw-r--r--drivers/i2c/busses/i2c-mpc.c194
-rw-r--r--drivers/i2c/busses/i2c-nomadik.c959
-rw-r--r--drivers/i2c/busses/i2c-omap.c44
-rw-r--r--drivers/i2c/busses/i2c-pnx.c11
-rw-r--r--drivers/i2c/busses/i2c-xiic.c824
8 files changed, 1951 insertions, 108 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 4cd1ff77ceda..9c6170cd9aac 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -421,13 +421,12 @@ config I2C_IXP2000
instead.
config I2C_MPC
- tristate "MPC107/824x/85xx/52xx/86xx"
+ tristate "MPC107/824x/85xx/512x/52xx/83xx/86xx"
depends on PPC32
help
If you say yes to this option, support will be included for the
- built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and
- MPC85xx/MPC8641 family processors. The driver may also work on 52xx
- family processors, though interrupts are known not to work.
+ built-in I2C interface on the MPC107, Tsi107, MPC512x, MPC52xx,
+ MPC8240, MPC8245, MPC83xx, MPC85xx and MPC8641 family processors.
This driver can also be built as a module. If so, the module
will be called i2c-mpc.
@@ -442,6 +441,13 @@ config I2C_MV64XXX
This driver can also be built as a module. If so, the module
will be called i2c-mv64xxx.
+config I2C_NOMADIK
+ tristate "ST-Ericsson Nomadik/Ux500 I2C Controller"
+ depends on PLAT_NOMADIK
+ help
+ If you say yes to this option, support will be included for the
+ I2C interface from ST-Ericsson's Nomadik and Ux500 architectures.
+
config I2C_OCORES
tristate "OpenCores I2C Controller"
depends on EXPERIMENTAL
@@ -577,6 +583,16 @@ config I2C_OCTEON
This driver can also be built as a module. If so, the module
will be called i2c-octeon.
+config I2C_XILINX
+ tristate "Xilinx I2C Controller"
+ depends on EXPERIMENTAL && HAS_IOMEM
+ help
+ If you say yes to this option, support will be included for the
+ Xilinx I2C controller.
+
+ This driver can also be built as a module. If so, the module
+ will be called xilinx_i2c.
+
comment "External I2C/SMBus adapter drivers"
config I2C_PARPORT
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index c2c4ea1908d8..097236f631e8 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -42,6 +42,7 @@ obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_MPC) += i2c-mpc.o
obj-$(CONFIG_I2C_MV64XXX) += i2c-mv64xxx.o
+obj-$(CONFIG_I2C_NOMADIK) += i2c-nomadik.o
obj-$(CONFIG_I2C_OCORES) += i2c-ocores.o
obj-$(CONFIG_I2C_OMAP) += i2c-omap.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
@@ -55,6 +56,7 @@ obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o
obj-$(CONFIG_I2C_STU300) += i2c-stu300.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o
+obj-$(CONFIG_I2C_XILINX) += i2c-xiic.o
# External I2C/SMBus adapter drivers
obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o
diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c
index 75bf820e7ccb..32375bddae7d 100644
--- a/drivers/i2c/busses/i2c-imx.c
+++ b/drivers/i2c/busses/i2c-imx.c
@@ -627,7 +627,6 @@ static int __exit i2c_imx_remove(struct platform_device *pdev)
}
static struct platform_driver i2c_imx_driver = {
- .probe = i2c_imx_probe,
.remove = __exit_p(i2c_imx_remove),
.driver = {
.name = DRIVER_NAME,
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index f627001108b8..78a15af32942 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -31,6 +31,9 @@
#define DRV_NAME "mpc-i2c"
+#define MPC_I2C_CLOCK_LEGACY 0
+#define MPC_I2C_CLOCK_PRESERVE (~0U)
+
#define MPC_I2C_FDR 0x04
#define MPC_I2C_CR 0x08
#define MPC_I2C_SR 0x0c
@@ -66,10 +69,9 @@ struct mpc_i2c_divider {
u16 fdr; /* including dfsrr */
};
-struct mpc_i2c_match_data {
- void (*setclock)(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler);
+struct mpc_i2c_data {
+ void (*setup)(struct device_node *node, struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler);
u32 prescaler;
};
@@ -164,8 +166,8 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
-#ifdef CONFIG_PPC_MPC52xx
-static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
+#if defined(CONFIG_PPC_MPC52xx) || defined(CONFIG_PPC_MPC512x)
+static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] __devinitconst = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
{36, 0x26}, {40, 0x27}, {44, 0x04}, {48, 0x28},
@@ -186,14 +188,15 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{10240, 0x9d}, {12288, 0x9e}, {15360, 0x9f}
};
-int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
+static int __devinit mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock,
+ int prescaler)
{
const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
u32 divider;
int i;
- if (!clock)
+ if (clock == MPC_I2C_CLOCK_LEGACY)
return -EINVAL;
/* Determine divider value */
@@ -215,12 +218,18 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
return div ? (int)div->fdr : -EINVAL;
}
-static void mpc_i2c_setclock_52xx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
int ret, fdr;
+ if (clock == MPC_I2C_CLOCK_PRESERVE) {
+ dev_dbg(i2c->dev, "using fdr %d\n",
+ readb(i2c->base + MPC_I2C_FDR));
+ return;
+ }
+
ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
@@ -229,16 +238,52 @@ static void mpc_i2c_setclock_52xx(struct device_node *node,
if (ret >= 0)
dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
-#else /* !CONFIG_PPC_MPC52xx */
-static void mpc_i2c_setclock_52xx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+#else /* !(CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x) */
+static void __devinit mpc_i2c_setup_52xx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+}
+#endif /* CONFIG_PPC_MPC52xx || CONFIG_PPC_MPC512x */
+
+#ifdef CONFIG_PPC_MPC512x
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
+{
+ struct device_node *node_ctrl;
+ void __iomem *ctrl;
+ const u32 *pval;
+ u32 idx;
+
+ /* Enable I2C interrupts for mpc5121 */
+ node_ctrl = of_find_compatible_node(NULL, NULL,
+ "fsl,mpc5121-i2c-ctrl");
+ if (node_ctrl) {
+ ctrl = of_iomap(node_ctrl, 0);
+ if (ctrl) {
+ /* Interrupt enable bits for i2c-0/1/2: bit 24/26/28 */
+ pval = of_get_property(node, "reg", NULL);
+ idx = (*pval & 0xff) / 0x20;
+ setbits32(ctrl, 1 << (24 + idx * 2));
+ iounmap(ctrl);
+ }
+ of_node_put(node_ctrl);
+ }
+
+ /* The clock setup for the 52xx works also fine for the 512x */
+ mpc_i2c_setup_52xx(node, i2c, clock, prescaler);
+}
+#else /* CONFIG_PPC_MPC512x */
+static void __devinit mpc_i2c_setup_512x(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
}
-#endif /* CONFIG_PPC_MPC52xx*/
+#endif /* CONFIG_PPC_MPC512x */
#ifdef CONFIG_FSL_SOC
-static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
+static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] __devinitconst = {
{160, 0x0120}, {192, 0x0121}, {224, 0x0122}, {256, 0x0123},
{288, 0x0100}, {320, 0x0101}, {352, 0x0601}, {384, 0x0102},
{416, 0x0602}, {448, 0x0126}, {480, 0x0103}, {512, 0x0127},
@@ -258,7 +303,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
{49152, 0x011e}, {61440, 0x011f}
};
-u32 mpc_i2c_get_sec_cfg_8xxx(void)
+static u32 __devinit mpc_i2c_get_sec_cfg_8xxx(void)
{
struct device_node *node = NULL;
u32 __iomem *reg;
@@ -287,13 +332,14 @@ u32 mpc_i2c_get_sec_cfg_8xxx(void)
return val;
}
-int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
+static int __devinit mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock,
+ u32 prescaler)
{
const struct mpc_i2c_divider *div = NULL;
u32 divider;
int i;
- if (!clock)
+ if (clock == MPC_I2C_CLOCK_LEGACY)
return -EINVAL;
/* Determine proper divider value */
@@ -320,12 +366,19 @@ int mpc_i2c_get_fdr_8xxx(struct device_node *node, u32 clock, u32 prescaler)
return div ? (int)div->fdr : -EINVAL;
}
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
int ret, fdr;
+ if (clock == MPC_I2C_CLOCK_PRESERVE) {
+ dev_dbg(i2c->dev, "using dfsrr %d, fdr %d\n",
+ readb(i2c->base + MPC_I2C_DFSRR),
+ readb(i2c->base + MPC_I2C_FDR));
+ return;
+ }
+
ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
@@ -338,9 +391,9 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node,
}
#else /* !CONFIG_FSL_SOC */
-static void mpc_i2c_setclock_8xxx(struct device_node *node,
- struct mpc_i2c *i2c,
- u32 clock, u32 prescaler)
+static void __devinit mpc_i2c_setup_8xxx(struct device_node *node,
+ struct mpc_i2c *i2c,
+ u32 clock, u32 prescaler)
{
}
#endif /* CONFIG_FSL_SOC */
@@ -494,7 +547,7 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
{
struct mpc_i2c *i2c;
const u32 *prop;
- u32 clock = 0;
+ u32 clock = MPC_I2C_CLOCK_LEGACY;
int result = 0;
int plen;
@@ -523,21 +576,21 @@ static int __devinit fsl_i2c_probe(struct of_device *op,
}
}
- if (!of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+ if (of_get_property(op->node, "fsl,preserve-clocking", NULL)) {
+ clock = MPC_I2C_CLOCK_PRESERVE;
+ } else {
prop = of_get_property(op->node, "clock-frequency", &plen);
if (prop && plen == sizeof(u32))
clock = *prop;
+ }
- if (match->data) {
- struct mpc_i2c_match_data *data =
- (struct mpc_i2c_match_data *)match->data;
- data->setclock(op->node, i2c, clock, data->prescaler);
- } else {
- /* Backwards compatibility */
- if (of_get_property(op->node, "dfsrr", NULL))
- mpc_i2c_setclock_8xxx(op->node, i2c,
- clock, 0);
- }
+ if (match->data) {
+ struct mpc_i2c_data *data = match->data;
+ data->setup(op->node, i2c, clock, data->prescaler);
+ } else {
+ /* Backwards compatibility */
+ if (of_get_property(op->node, "dfsrr", NULL))
+ mpc_i2c_setup_8xxx(op->node, i2c, clock, 0);
}
dev_set_drvdata(&op->dev, i2c);
@@ -582,47 +635,42 @@ static int __devexit fsl_i2c_remove(struct of_device *op)
return 0;
};
+static struct mpc_i2c_data mpc_i2c_data_512x __devinitdata = {
+ .setup = mpc_i2c_setup_512x,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_52xx __devinitdata = {
+ .setup = mpc_i2c_setup_52xx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8313 __devinitdata = {
+ .setup = mpc_i2c_setup_8xxx,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8543 __devinitdata = {
+ .setup = mpc_i2c_setup_8xxx,
+ .prescaler = 2,
+};
+
+static struct mpc_i2c_data mpc_i2c_data_8544 __devinitdata = {
+ .setup = mpc_i2c_setup_8xxx,
+ .prescaler = 3,
+};
+
static const struct of_device_id mpc_i2c_of_match[] = {
- {.compatible = "mpc5200-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_52xx,
- },
- },
- {.compatible = "fsl,mpc5200b-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_52xx,
- },
- },
- {.compatible = "fsl,mpc5200-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_52xx,
- },
- },
- {.compatible = "fsl,mpc8313-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_8xxx,
- },
- },
- {.compatible = "fsl,mpc8543-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_8xxx,
- .prescaler = 2,
- },
- },
- {.compatible = "fsl,mpc8544-i2c",
- .data = &(struct mpc_i2c_match_data) {
- .setclock = mpc_i2c_setclock_8xxx,
- .prescaler = 3,
- },
+ {.compatible = "mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5200b-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5200-i2c", .data = &mpc_i2c_data_52xx, },
+ {.compatible = "fsl,mpc5121-i2c", .data = &mpc_i2c_data_512x, },
+ {.compatible = "fsl,mpc8313-i2c", .data = &mpc_i2c_data_8313, },
+ {.compatible = "fsl,mpc8543-i2c", .data = &mpc_i2c_data_8543, },
+ {.compatible = "fsl,mpc8544-i2c", .data = &mpc_i2c_data_8544, },
/* Backward compatibility */
- },
{.compatible = "fsl-i2c", },
{},
};
-
MODULE_DEVICE_TABLE(of, mpc_i2c_of_match);
-
/* Structure for a device driver */
static struct of_platform_driver mpc_i2c_driver = {
.match_table = mpc_i2c_of_match,
@@ -655,5 +703,5 @@ module_exit(fsl_i2c_exit);
MODULE_AUTHOR("Adrian Cox <adrian@humboldt.co.uk>");
MODULE_DESCRIPTION("I2C-Bus adapter for MPC107 bridge and "
- "MPC824x/85xx/52xx processors");
+ "MPC824x/83xx/85xx/86xx/512x/52xx processors");
MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-nomadik.c b/drivers/i2c/busses/i2c-nomadik.c
new file mode 100644
index 000000000000..a15f731fa451
--- /dev/null
+++ b/drivers/i2c/busses/i2c-nomadik.c
@@ -0,0 +1,959 @@
+/*
+ * Copyright (C) 2009 ST-Ericsson
+ * Copyright (C) 2009 STMicroelectronics
+ *
+ * I2C master mode controller driver, used in Nomadik 8815
+ * and Ux500 platforms.
+ *
+ * Author: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com>
+ * Author: Sachin Verma <sachin.verma@st.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2, as
+ * published by the Free Software Foundation.
+ */
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/i2c.h>
+
+#define DRIVER_NAME "nmk-i2c"
+
+/* I2C Controller register offsets */
+#define I2C_CR (0x000)
+#define I2C_SCR (0x004)
+#define I2C_HSMCR (0x008)
+#define I2C_MCR (0x00C)
+#define I2C_TFR (0x010)
+#define I2C_SR (0x014)
+#define I2C_RFR (0x018)
+#define I2C_TFTR (0x01C)
+#define I2C_RFTR (0x020)
+#define I2C_DMAR (0x024)
+#define I2C_BRCR (0x028)
+#define I2C_IMSCR (0x02C)
+#define I2C_RISR (0x030)
+#define I2C_MISR (0x034)
+#define I2C_ICR (0x038)
+
+/* Control registers */
+#define I2C_CR_PE (0x1 << 0) /* Peripheral Enable */
+#define I2C_CR_OM (0x3 << 1) /* Operating mode */
+#define I2C_CR_SAM (0x1 << 3) /* Slave addressing mode */
+#define I2C_CR_SM (0x3 << 4) /* Speed mode */
+#define I2C_CR_SGCM (0x1 << 6) /* Slave general call mode */
+#define I2C_CR_FTX (0x1 << 7) /* Flush Transmit */
+#define I2C_CR_FRX (0x1 << 8) /* Flush Receive */
+#define I2C_CR_DMA_TX_EN (0x1 << 9) /* DMA Tx enable */
+#define I2C_CR_DMA_RX_EN (0x1 << 10) /* DMA Rx Enable */
+#define I2C_CR_DMA_SLE (0x1 << 11) /* DMA sync. logic enable */
+#define I2C_CR_LM (0x1 << 12) /* Loopback mode */
+#define I2C_CR_FON (0x3 << 13) /* Filtering on */
+#define I2C_CR_FS (0x3 << 15) /* Force stop enable */
+
+/* Master controller (MCR) register */
+#define I2C_MCR_OP (0x1 << 0) /* Operation */
+#define I2C_MCR_A7 (0x7f << 1) /* 7-bit address */
+#define I2C_MCR_EA10 (0x7 << 8) /* 10-bit Extended address */
+#define I2C_MCR_SB (0x1 << 11) /* Extended address */
+#define I2C_MCR_AM (0x3 << 12) /* Address type */
+#define I2C_MCR_STOP (0x1 << 14) /* Stop condition */
+#define I2C_MCR_LENGTH (0x7ff << 15) /* Transaction length */
+
+/* Status register (SR) */
+#define I2C_SR_OP (0x3 << 0) /* Operation */
+#define I2C_SR_STATUS (0x3 << 2) /* controller status */
+#define I2C_SR_CAUSE (0x7 << 4) /* Abort cause */
+#define I2C_SR_TYPE (0x3 << 7) /* Receive type */
+#define I2C_SR_LENGTH (0x7ff << 9) /* Transfer length */
+
+/* Interrupt mask set/clear (IMSCR) bits */
+#define I2C_IT_TXFE (0x1 << 0)
+#define I2C_IT_TXFNE (0x1 << 1)
+#define I2C_IT_TXFF (0x1 << 2)
+#define I2C_IT_TXFOVR (0x1 << 3)
+#define I2C_IT_RXFE (0x1 << 4)
+#define I2C_IT_RXFNF (0x1 << 5)
+#define I2C_IT_RXFF (0x1 << 6)
+#define I2C_IT_RFSR (0x1 << 16)
+#define I2C_IT_RFSE (0x1 << 17)
+#define I2C_IT_WTSR (0x1 << 18)
+#define I2C_IT_MTD (0x1 << 19)
+#define I2C_IT_STD (0x1 << 20)
+#define I2C_IT_MAL (0x1 << 24)
+#define I2C_IT_BERR (0x1 << 25)
+#define I2C_IT_MTDWS (0x1 << 28)
+
+#define GEN_MASK(val, mask, sb) (((val) << (sb)) & (mask))
+
+/* some bits in ICR are reserved */
+#define I2C_CLEAR_ALL_INTS 0x131f007f
+
+/* first three msb bits are reserved */
+#define IRQ_MASK(mask) (mask & 0x1fffffff)
+
+/* maximum threshold value */
+#define MAX_I2C_FIFO_THRESHOLD 15
+
+enum i2c_status {
+ I2C_NOP,
+ I2C_ON_GOING,
+ I2C_OK,
+ I2C_ABORT
+};
+
+/* operation */
+enum i2c_operation {
+ I2C_NO_OPERATION = 0xff,
+ I2C_WRITE = 0x00,
+ I2C_READ = 0x01
+};
+
+/* controller response timeout in ms */
+#define I2C_TIMEOUT_MS 500
+
+/**
+ * struct i2c_nmk_client - client specific data
+ * @slave_adr: 7-bit slave address
+ * @count: no. bytes to be transfered
+ * @buffer: client data buffer
+ * @xfer_bytes: bytes transfered till now
+ * @operation: current I2C operation
+ */
+struct i2c_nmk_client {
+ unsigned short slave_adr;
+ unsigned long count;
+ unsigned char *buffer;
+ unsigned long xfer_bytes;
+ enum i2c_operation operation;
+};
+
+/**
+ * struct nmk_i2c_dev - private data structure of the controller
+ * @pdev: parent platform device
+ * @adap: corresponding I2C adapter
+ * @irq: interrupt line for the controller
+ * @virtbase: virtual io memory area
+ * @clk: hardware i2c block clock
+ * @cfg: machine provided controller configuration
+ * @cli: holder of client specific data
+ * @stop: stop condition
+ * @xfer_complete: acknowledge completion for a I2C message
+ * @result: controller propogated result
+ */
+struct nmk_i2c_dev {
+ struct platform_device *pdev;
+ struct i2c_adapter adap;
+ int irq;
+ void __iomem *virtbase;
+ struct clk *clk;
+ struct nmk_i2c_controller cfg;
+ struct i2c_nmk_client cli;
+ int stop;
+ struct completion xfer_complete;
+ int result;
+};
+
+/* controller's abort causes */
+static const char *abort_causes[] = {
+ "no ack received after address transmission",
+ "no ack received during data phase",
+ "ack received after xmission of master code",
+ "master lost arbitration",
+ "slave restarts",
+ "slave reset",
+ "overflow, maxsize is 2047 bytes",
+};
+
+static inline void i2c_set_bit(void __iomem *reg, u32 mask)
+{
+ writel(readl(reg) | mask, reg);
+}
+
+static inline void i2c_clr_bit(void __iomem *reg, u32 mask)
+{
+ writel(readl(reg) & ~mask, reg);
+}
+
+/**
+ * flush_i2c_fifo() - This function flushes the I2C FIFO
+ * @dev: private data of I2C Driver
+ *
+ * This function flushes the I2C Tx and Rx FIFOs. It returns
+ * 0 on successful flushing of FIFO
+ */
+static int flush_i2c_fifo(struct nmk_i2c_dev *dev)
+{
+#define LOOP_ATTEMPTS 10
+ int i;
+ unsigned long timeout;
+
+ /*
+ * flush the transmit and receive FIFO. The flushing
+ * operation takes several cycles before to be completed.
+ * On the completion, the I2C internal logic clears these
+ * bits, until then no one must access Tx, Rx FIFO and
+ * should poll on these bits waiting for the completion.
+ */
+ writel((I2C_CR_FTX | I2C_CR_FRX), dev->virtbase + I2C_CR);
+
+ for (i = 0; i < LOOP_ATTEMPTS; i++) {
+ timeout = jiffies + msecs_to_jiffies(I2C_TIMEOUT_MS);
+
+ while (!time_after(jiffies, timeout)) {
+ if ((readl(dev->virtbase + I2C_CR) &
+ (I2C_CR_FTX | I2C_CR_FRX)) == 0)
+ return 0;
+ }
+ }
+
+ dev_err(&dev->pdev->dev, "flushing operation timed out "
+ "giving up after %d attempts", LOOP_ATTEMPTS);
+
+ return -ETIMEDOUT;
+}
+
+/**
+ * disable_all_interrupts() - Disable all interrupts of this I2c Bus
+ * @dev: private data of I2C Driver
+ */
+static void disable_all_interrupts(struct nmk_i2c_dev *dev)
+{
+ u32 mask = IRQ_MASK(0);
+ writel(mask, dev->virtbase + I2C_IMSCR);
+}
+
+/**
+ * clear_all_interrupts() - Clear all interrupts of I2C Controller
+ * @dev: private data of I2C Driver
+ */
+static void clear_all_interrupts(struct nmk_i2c_dev *dev)
+{
+ u32 mask;
+ mask = IRQ_MASK(I2C_CLEAR_ALL_INTS);
+ writel(mask, dev->virtbase + I2C_ICR);
+}
+
+/**
+ * init_hw() - initialize the I2C hardware
+ * @dev: private data of I2C Driver
+ */
+static int init_hw(struct nmk_i2c_dev *dev)
+{
+ int stat;
+
+ stat = flush_i2c_fifo(dev);
+ if (stat)
+ return stat;
+
+ /* disable the controller */
+ i2c_clr_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
+
+ disable_all_interrupts(dev);
+
+ clear_all_interrupts(dev);
+
+ dev->cli.operation = I2C_NO_OPERATION;
+
+ return 0;
+}
+
+/* enable peripheral, master mode operation */
+#define DEFAULT_I2C_REG_CR ((1 << 1) | I2C_CR_PE)
+
+/**
+ * load_i2c_mcr_reg() - load the MCR register
+ * @dev: private data of controller
+ */
+static u32 load_i2c_mcr_reg(struct nmk_i2c_dev *dev)
+{
+ u32 mcr = 0;
+
+ /* 7-bit address transaction */
+ mcr |= GEN_MASK(1, I2C_MCR_AM, 12);
+ mcr |= GEN_MASK(dev->cli.slave_adr, I2C_MCR_A7, 1);
+
+ /* start byte procedure not applied */
+ mcr |= GEN_MASK(0, I2C_MCR_SB, 11);
+
+ /* check the operation, master read/write? */
+ if (dev->cli.operation == I2C_WRITE)
+ mcr |= GEN_MASK(I2C_WRITE, I2C_MCR_OP, 0);
+ else
+ mcr |= GEN_MASK(I2C_READ, I2C_MCR_OP, 0);
+
+ /* stop or repeated start? */
+ if (dev->stop)
+ mcr |= GEN_MASK(1, I2C_MCR_STOP, 14);
+ else
+ mcr &= ~(GEN_MASK(1, I2C_MCR_STOP, 14));
+
+ mcr |= GEN_MASK(dev->cli.count, I2C_MCR_LENGTH, 15);
+
+ return mcr;
+}
+
+/**
+ * setup_i2c_controller() - setup the controller
+ * @dev: private data of controller
+ */
+static void setup_i2c_controller(struct nmk_i2c_dev *dev)
+{
+ u32 brcr1, brcr2;
+ u32 i2c_clk, div;
+
+ writel(0x0, dev->virtbase + I2C_CR);
+ writel(0x0, dev->virtbase + I2C_HSMCR);
+ writel(0x0, dev->virtbase + I2C_TFTR);
+ writel(0x0, dev->virtbase + I2C_RFTR);
+ writel(0x0, dev->virtbase + I2C_DMAR);
+
+ /*
+ * set the slsu:
+ *
+ * slsu defines the data setup time after SCL clock
+ * stretching in terms of i2c clk cycles. The
+ * needed setup time for the three modes are 250ns,
+ * 100ns, 10ns repectively thus leading to the values
+ * of 14, 6, 2 for a 48 MHz i2c clk.
+ */
+ writel(dev->cfg.slsu << 16, dev->virtbase + I2C_SCR);
+
+ i2c_clk = clk_get_rate(dev->clk);
+
+ /* fallback to std. mode if machine has not provided it */
+ if (dev->cfg.clk_freq == 0)
+ dev->cfg.clk_freq = 100000;
+
+ /*
+ * The spec says, in case of std. mode the divider is
+ * 2 whereas it is 3 for fast and fastplus mode of
+ * operation. TODO - high speed support.
+ */
+ div = (dev->cfg.clk_freq > 100000) ? 3 : 2;
+
+ /*
+ * generate the mask for baud rate counters. The controller
+ * has two baud rate counters. One is used for High speed
+ * operation, and the other is for std, fast mode, fast mode
+ * plus operation. Currently we do not supprt high speed mode
+ * so set brcr1 to 0.
+ */
+ brcr1 = 0 << 16;
+ brcr2 = (i2c_clk/(dev->cfg.clk_freq * div)) & 0xffff;
+
+ /* set the baud rate counter register */
+ writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
+
+ /*
+ * set the speed mode. Currently we support
+ * only standard and fast mode of operation
+ * TODO - support for fast mode plus (upto 1Mb/s)
+ * and high speed (up to 3.4 Mb/s)
+ */
+ if (dev->cfg.sm > I2C_FREQ_MODE_FAST) {
+ dev_err(&dev->pdev->dev, "do not support this mode "
+ "defaulting to std. mode\n");
+ brcr2 = i2c_clk/(100000 * 2) & 0xffff;
+ writel((brcr1 | brcr2), dev->virtbase + I2C_BRCR);
+ writel(I2C_FREQ_MODE_STANDARD << 4,
+ dev->virtbase + I2C_CR);
+ }
+ writel(dev->cfg.sm << 4, dev->virtbase + I2C_CR);
+
+ /* set the Tx and Rx FIFO threshold */
+ writel(dev->cfg.tft, dev->virtbase + I2C_TFTR);
+ writel(dev->cfg.rft, dev->virtbase + I2C_RFTR);
+}
+
+/**
+ * read_i2c() - Read from I2C client device
+ * @dev: private data of I2C Driver
+ *
+ * This function reads from i2c client device when controller is in
+ * master mode. There is a completion timeout. If there is no transfer
+ * before timeout error is returned.
+ */
+static int read_i2c(struct nmk_i2c_dev *dev)
+{
+ u32 status = 0;
+ u32 mcr;
+ u32 irq_mask = 0;
+ int timeout;
+
+ mcr = load_i2c_mcr_reg(dev);
+ writel(mcr, dev->virtbase + I2C_MCR);
+
+ /* load the current CR value */
+ writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+ dev->virtbase + I2C_CR);
+
+ /* enable the controller */
+ i2c_set_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+
+ init_completion(&dev->xfer_complete);
+
+ /* enable interrupts by setting the mask */
+ irq_mask = (I2C_IT_RXFNF | I2C_IT_RXFF |
+ I2C_IT_MAL | I2C_IT_BERR);
+
+ if (dev->stop)
+ irq_mask |= I2C_IT_MTD;
+ else
+ irq_mask |= I2C_IT_MTDWS;
+
+ irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
+
+ writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
+ dev->virtbase + I2C_IMSCR);
+
+ timeout = wait_for_completion_interruptible_timeout(
+ &dev->xfer_complete, msecs_to_jiffies(I2C_TIMEOUT_MS));
+
+ if (timeout < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait_for_completion_interruptible_timeout"
+ "returned %d waiting for event\n", timeout);
+ status = timeout;
+ }
+
+ if (timeout == 0) {
+ /* controler has timedout, re-init the h/w */
+ dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
+ (void) init_hw(dev);
+ status = -ETIMEDOUT;
+ }
+
+ return status;
+}
+
+/**
+ * write_i2c() - Write data to I2C client.
+ * @dev: private data of I2C Driver
+ *
+ * This function writes data to I2C client
+ */
+static int write_i2c(struct nmk_i2c_dev *dev)
+{
+ u32 status = 0;
+ u32 mcr;
+ u32 irq_mask = 0;
+ int timeout;
+
+ mcr = load_i2c_mcr_reg(dev);
+
+ writel(mcr, dev->virtbase + I2C_MCR);
+
+ /* load the current CR value */
+ writel(readl(dev->virtbase + I2C_CR) | DEFAULT_I2C_REG_CR,
+ dev->virtbase + I2C_CR);
+
+ /* enable the controller */
+ i2c_set_bit(dev->virtbase + I2C_CR , I2C_CR_PE);
+
+ init_completion(&dev->xfer_complete);
+
+ /* enable interrupts by settings the masks */
+ irq_mask = (I2C_IT_TXFNE | I2C_IT_TXFOVR |
+ I2C_IT_MAL | I2C_IT_BERR);
+
+ /*
+ * check if we want to transfer a single or multiple bytes, if so
+ * set the MTDWS bit (Master Transaction Done Without Stop)
+ * to start repeated start operation
+ */
+ if (dev->stop)
+ irq_mask |= I2C_IT_MTD;
+ else
+ irq_mask |= I2C_IT_MTDWS;
+
+ irq_mask = I2C_CLEAR_ALL_INTS & IRQ_MASK(irq_mask);
+
+ writel(readl(dev->virtbase + I2C_IMSCR) | irq_mask,
+ dev->virtbase + I2C_IMSCR);
+
+ timeout = wait_for_completion_interruptible_timeout(
+ &dev->xfer_complete, msecs_to_jiffies(I2C_TIMEOUT_MS));
+
+ if (timeout < 0) {
+ dev_err(&dev->pdev->dev,
+ "wait_for_completion_interruptible_timeout"
+ "returned %d waiting for event\n", timeout);
+ status = timeout;
+ }
+
+ if (timeout == 0) {
+ /* controler has timedout, re-init the h/w */
+ dev_err(&dev->pdev->dev, "controller timed out, re-init h/w\n");
+ (void) init_hw(dev);
+ status = -ETIMEDOUT;
+ }
+
+ return status;
+}
+
+/**
+ * nmk_i2c_xfer() - I2C transfer function used by kernel framework
+ * @i2c_adap - Adapter pointer to the controller
+ * @msgs[] - Pointer to data to be written.
+ * @num_msgs - Number of messages to be executed
+ *
+ * This is the function called by the generic kernel i2c_transfer()
+ * or i2c_smbus...() API calls. Note that this code is protected by the
+ * semaphore set in the kernel i2c_transfer() function.
+ *
+ * NOTE:
+ * READ TRANSFER : We impose a restriction of the first message to be the
+ * index message for any read transaction.
+ * - a no index is coded as '0',
+ * - 2byte big endian index is coded as '3'
+ * !!! msg[0].buf holds the actual index.
+ * This is compatible with generic messages of smbus emulator
+ * that send a one byte index.
+ * eg. a I2C transation to read 2 bytes from index 0
+ * idx = 0;
+ * msg[0].addr = client->addr;
+ * msg[0].flags = 0x0;
+ * msg[0].len = 1;
+ * msg[0].buf = &idx;
+ *
+ * msg[1].addr = client->addr;
+ * msg[1].flags = I2C_M_RD;
+ * msg[1].len = 2;
+ * msg[1].buf = rd_buff
+ * i2c_transfer(adap, msg, 2);
+ *
+ * WRITE TRANSFER : The I2C standard interface interprets all data as payload.
+ * If you want to emulate an SMBUS write transaction put the
+ * index as first byte(or first and second) in the payload.
+ * eg. a I2C transation to write 2 bytes from index 1
+ * wr_buff[0] = 0x1;
+ * wr_buff[1] = 0x23;
+ * wr_buff[2] = 0x46;
+ * msg[0].flags = 0x0;
+ * msg[0].len = 3;
+ * msg[0].buf = wr_buff;
+ * i2c_transfer(adap, msg, 1);
+ *
+ * To read or write a block of data (multiple bytes) using SMBUS emulation
+ * please use the i2c_smbus_read_i2c_block_data()
+ * or i2c_smbus_write_i2c_block_data() API
+ */
+static int nmk_i2c_xfer(struct i2c_adapter *i2c_adap,
+ struct i2c_msg msgs[], int num_msgs)
+{
+ int status;
+ int i;
+ u32 cause;
+ struct nmk_i2c_dev *dev = i2c_get_adapdata(i2c_adap);
+
+ status = init_hw(dev);
+ if (status)
+ return status;
+
+ /* setup the i2c controller */
+ setup_i2c_controller(dev);
+
+ for (i = 0; i < num_msgs; i++) {
+ if (unlikely(msgs[i].flags & I2C_M_TEN)) {
+ dev_err(&dev->pdev->dev, "10 bit addressing"
+ "not supported\n");
+ return -EINVAL;
+ }
+ dev->cli.slave_adr = msgs[i].addr;
+ dev->cli.buffer = msgs[i].buf;
+ dev->cli.count = msgs[i].len;
+ dev->stop = (i < (num_msgs - 1)) ? 0 : 1;
+ dev->result = 0;
+
+ if (msgs[i].flags & I2C_M_RD) {
+ /* it is a read operation */
+ dev->cli.operation = I2C_READ;
+ status = read_i2c(dev);
+ } else {
+ /* write operation */
+ dev->cli.operation = I2C_WRITE;
+ status = write_i2c(dev);
+ }
+ if (status || (dev->result)) {
+ /* get the abort cause */
+ cause = (readl(dev->virtbase + I2C_SR) >> 4) & 0x7;
+ dev_err(&dev->pdev->dev, "error during I2C"
+ "message xfer: %d\n", cause);
+ dev_err(&dev->pdev->dev, "%s\n",
+ cause >= ARRAY_SIZE(abort_causes)
+ ? "unknown reason" : abort_causes[cause]);
+ return status;
+ }
+ mdelay(1);
+ }
+ /* return the no. messages processed */
+ if (status)
+ return status;
+ else
+ return num_msgs;
+}
+
+/**
+ * disable_interrupts() - disable the interrupts
+ * @dev: private data of controller
+ */
+static int disable_interrupts(struct nmk_i2c_dev *dev, u32 irq)
+{
+ irq = IRQ_MASK(irq);
+ writel(readl(dev->virtbase + I2C_IMSCR) & ~(I2C_CLEAR_ALL_INTS & irq),
+ dev->virtbase + I2C_IMSCR);
+ return 0;
+}
+
+/**
+ * i2c_irq_handler() - interrupt routine
+ * @irq: interrupt number
+ * @arg: data passed to the handler
+ *
+ * This is the interrupt handler for the i2c driver. Currently
+ * it handles the major interrupts like Rx & Tx FIFO management
+ * interrupts, master transaction interrupts, arbitration and
+ * bus error interrupts. The rest of the interrupts are treated as
+ * unhandled.
+ */
+static irqreturn_t i2c_irq_handler(int irq, void *arg)
+{
+ struct nmk_i2c_dev *dev = arg;
+ u32 tft, rft;
+ u32 count;
+ u32 misr;
+ u32 src = 0;
+
+ /* load Tx FIFO and Rx FIFO threshold values */
+ tft = readl(dev->virtbase + I2C_TFTR);
+ rft = readl(dev->virtbase + I2C_RFTR);
+
+ /* read interrupt status register */
+ misr = readl(dev->virtbase + I2C_MISR);
+
+ src = __ffs(misr);
+ switch ((1 << src)) {
+
+ /* Transmit FIFO nearly empty interrupt */
+ case I2C_IT_TXFNE:
+ {
+ if (dev->cli.operation == I2C_READ) {
+ /*
+ * in read operation why do we care for writing?
+ * so disable the Transmit FIFO interrupt
+ */
+ disable_interrupts(dev, I2C_IT_TXFNE);
+ } else {
+ for (count = (MAX_I2C_FIFO_THRESHOLD - tft - 2);
+ (count > 0) &&
+ (dev->cli.count != 0);
+ count--) {
+ /* write to the Tx FIFO */
+ writeb(*dev->cli.buffer,
+ dev->virtbase + I2C_TFR);
+ dev->cli.buffer++;
+ dev->cli.count--;
+ dev->cli.xfer_bytes++;
+ }
+ /*
+ * if done, close the transfer by disabling the
+ * corresponding TXFNE interrupt
+ */
+ if (dev->cli.count == 0)
+ disable_interrupts(dev, I2C_IT_TXFNE);
+ }
+ }
+ break;
+
+ /*
+ * Rx FIFO nearly full interrupt.
+ * This is set when the numer of entries in Rx FIFO is
+ * greater or equal than the threshold value programmed
+ * in RFT
+ */
+ case I2C_IT_RXFNF:
+ for (count = rft; count > 0; count--) {
+ /* Read the Rx FIFO */
+ *dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
+ dev->cli.buffer++;
+ }
+ dev->cli.count -= rft;
+ dev->cli.xfer_bytes += rft;
+ break;
+
+ /* Rx FIFO full */
+ case I2C_IT_RXFF:
+ for (count = MAX_I2C_FIFO_THRESHOLD; count > 0; count--) {
+ *dev->cli.buffer = readb(dev->virtbase + I2C_RFR);
+ dev->cli.buffer++;
+ }
+ dev->cli.count -= MAX_I2C_FIFO_THRESHOLD;
+ dev->cli.xfer_bytes += MAX_I2C_FIFO_THRESHOLD;
+ break;
+
+ /* Master Transaction Done with/without stop */
+ case I2C_IT_MTD:
+ case I2C_IT_MTDWS:
+ if (dev->cli.operation == I2C_READ) {
+ while (!readl(dev->virtbase + I2C_RISR) & I2C_IT_RXFE) {
+ if (dev->cli.count == 0)
+ break;
+ *dev->cli.buffer =
+ readb(dev->virtbase + I2C_RFR);
+ dev->cli.buffer++;
+ dev->cli.count--;
+ dev->cli.xfer_bytes++;
+ }
+ }
+
+ i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTD);
+ i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MTDWS);
+
+ disable_interrupts(dev,
+ (I2C_IT_TXFNE | I2C_IT_TXFE | I2C_IT_TXFF
+ | I2C_IT_TXFOVR | I2C_IT_RXFNF
+ | I2C_IT_RXFF | I2C_IT_RXFE));
+
+ if (dev->cli.count) {
+ dev->result = -1;
+ dev_err(&dev->pdev->dev, "%lu bytes still remain to be"
+ "xfered\n", dev->cli.count);
+ (void) init_hw(dev);
+ }
+ complete(&dev->xfer_complete);
+
+ break;
+
+ /* Master Arbitration lost interrupt */
+ case I2C_IT_MAL:
+ dev->result = -1;
+ (void) init_hw(dev);
+
+ i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_MAL);
+ complete(&dev->xfer_complete);
+
+ break;
+
+ /*
+ * Bus Error interrupt.
+ * This happens when an unexpected start/stop condition occurs
+ * during the transaction.
+ */
+ case I2C_IT_BERR:
+ dev->result = -1;
+ /* get the status */
+ if (((readl(dev->virtbase + I2C_SR) >> 2) & 0x3) == I2C_ABORT)
+ (void) init_hw(dev);
+
+ i2c_set_bit(dev->virtbase + I2C_ICR, I2C_IT_BERR);
+ complete(&dev->xfer_complete);
+
+ break;
+
+ /*
+ * Tx FIFO overrun interrupt.
+ * This is set when a write operation in Tx FIFO is performed and
+ * the Tx FIFO is full.
+ */
+ case I2C_IT_TXFOVR:
+ dev->result = -1;
+ (void) init_hw(dev);
+
+ dev_err(&dev->pdev->dev, "Tx Fifo Over run\n");
+ complete(&dev->xfer_complete);
+
+ break;
+
+ /* unhandled interrupts by this driver - TODO*/
+ case I2C_IT_TXFE:
+ case I2C_IT_TXFF:
+ case I2C_IT_RXFE:
+ case I2C_IT_RFSR:
+ case I2C_IT_RFSE:
+ case I2C_IT_WTSR:
+ case I2C_IT_STD:
+ dev_err(&dev->pdev->dev, "unhandled Interrupt\n");
+ break;
+ default:
+ dev_err(&dev->pdev->dev, "spurious Interrupt..\n");
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int nmk_i2c_functionality(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C
+ | I2C_FUNC_SMBUS_BYTE_DATA
+ | I2C_FUNC_SMBUS_WORD_DATA
+ | I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static const struct i2c_algorithm nmk_i2c_algo = {
+ .master_xfer = nmk_i2c_xfer,
+ .functionality = nmk_i2c_functionality
+};
+
+static int __devinit nmk_i2c_probe(struct platform_device *pdev)
+{
+ int ret = 0;
+ struct resource *res;
+ struct nmk_i2c_controller *pdata =
+ pdev->dev.platform_data;
+ struct nmk_i2c_dev *dev;
+ struct i2c_adapter *adap;
+
+ dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
+ if (!dev) {
+ dev_err(&pdev->dev, "cannot allocate memory\n");
+ ret = -ENOMEM;
+ goto err_no_mem;
+ }
+
+ dev->pdev = pdev;
+ platform_set_drvdata(pdev, dev);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ ret = -ENOENT;
+ goto err_no_resource;
+ }
+
+ if (request_mem_region(res->start, resource_size(res),
+ DRIVER_NAME "I/O region") == NULL) {
+ ret = -EBUSY;
+ goto err_no_region;
+ }
+
+ dev->virtbase = ioremap(res->start, resource_size(res));
+ if (!dev->virtbase) {
+ ret = -ENOMEM;
+ goto err_no_ioremap;
+ }
+
+ dev->irq = platform_get_irq(pdev, 0);
+ ret = request_irq(dev->irq, i2c_irq_handler, IRQF_DISABLED,
+ DRIVER_NAME, dev);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot claim the irq %d\n", dev->irq);
+ goto err_irq;
+ }
+
+ dev->clk = clk_get(&pdev->dev, NULL);
+ if (IS_ERR(dev->clk)) {
+ dev_err(&pdev->dev, "could not get i2c clock\n");
+ ret = PTR_ERR(dev->clk);
+ goto err_no_clk;
+ }
+
+ clk_enable(dev->clk);
+
+ adap = &dev->adap;
+ adap->dev.parent = &pdev->dev;
+ adap->owner = THIS_MODULE;
+ adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD;
+ adap->algo = &nmk_i2c_algo;
+
+ /* fetch the controller id */
+ adap->nr = pdev->id;
+
+ /* fetch the controller configuration from machine */
+ dev->cfg.clk_freq = pdata->clk_freq;
+ dev->cfg.slsu = pdata->slsu;
+ dev->cfg.tft = pdata->tft;
+ dev->cfg.rft = pdata->rft;
+ dev->cfg.sm = pdata->sm;
+
+ i2c_set_adapdata(adap, dev);
+
+ ret = init_hw(dev);
+ if (ret != 0) {
+ dev_err(&pdev->dev, "error in initializing i2c hardware\n");
+ goto err_init_hw;
+ }
+
+ dev_dbg(&pdev->dev, "initialize I2C%d bus on virtual "
+ "base %p\n", pdev->id, dev->virtbase);
+
+ ret = i2c_add_numbered_adapter(adap);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add adapter\n");
+ goto err_add_adap;
+ }
+
+ return 0;
+
+ err_init_hw:
+ clk_disable(dev->clk);
+ err_add_adap:
+ clk_put(dev->clk);
+ err_no_clk:
+ free_irq(dev->irq, dev);
+ err_irq:
+ iounmap(dev->virtbase);
+ err_no_ioremap:
+ release_mem_region(res->start, resource_size(res));
+ err_no_region:
+ platform_set_drvdata(pdev, NULL);
+ err_no_resource:
+ kfree(dev);
+ err_no_mem:
+
+ return ret;
+}
+
+static int __devexit nmk_i2c_remove(struct platform_device *pdev)
+{
+ struct nmk_i2c_dev *dev = platform_get_drvdata(pdev);
+
+ i2c_del_adapter(&dev->adap);
+ flush_i2c_fifo(dev);
+ disable_all_interrupts(dev);
+ clear_all_interrupts(dev);
+ /* disable the controller */
+ i2c_clr_bit(dev->virtbase + I2C_CR, I2C_CR_PE);
+ free_irq(dev->irq, dev);
+ iounmap(dev->virtbase);
+ clk_disable(dev->clk);
+ clk_put(dev->clk);
+ platform_set_drvdata(pdev, NULL);
+ kfree(dev);
+
+ return 0;
+}
+
+static struct platform_driver nmk_i2c_driver = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+ .probe = nmk_i2c_probe,
+ .remove = __devexit_p(nmk_i2c_remove),
+};
+
+static int __init nmk_i2c_init(void)
+{
+ return platform_driver_register(&nmk_i2c_driver);
+}
+
+static void __exit nmk_i2c_exit(void)
+{
+ platform_driver_unregister(&nmk_i2c_driver);
+}
+
+subsys_initcall(nmk_i2c_init);
+module_exit(nmk_i2c_exit);
+
+MODULE_AUTHOR("Sachin Verma, Srinidhi KASAGAR");
+MODULE_DESCRIPTION("Nomadik/Ux500 I2C driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:" DRIVER_NAME);
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 0037e31076ba..913abd7c172f 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -49,24 +49,24 @@
#define OMAP_I2C_TIMEOUT (msecs_to_jiffies(1000))
#define OMAP_I2C_REV_REG 0x00
-#define OMAP_I2C_IE_REG 0x04
-#define OMAP_I2C_STAT_REG 0x08
-#define OMAP_I2C_IV_REG 0x0c
+#define OMAP_I2C_IE_REG 0x01
+#define OMAP_I2C_STAT_REG 0x02
+#define OMAP_I2C_IV_REG 0x03
/* For OMAP3 I2C_IV has changed to I2C_WE (wakeup enable) */
-#define OMAP_I2C_WE_REG 0x0c
-#define OMAP_I2C_SYSS_REG 0x10
-#define OMAP_I2C_BUF_REG 0x14
-#define OMAP_I2C_CNT_REG 0x18
-#define OMAP_I2C_DATA_REG 0x1c
-#define OMAP_I2C_SYSC_REG 0x20
-#define OMAP_I2C_CON_REG 0x24
-#define OMAP_I2C_OA_REG 0x28
-#define OMAP_I2C_SA_REG 0x2c
-#define OMAP_I2C_PSC_REG 0x30
-#define OMAP_I2C_SCLL_REG 0x34
-#define OMAP_I2C_SCLH_REG 0x38
-#define OMAP_I2C_SYSTEST_REG 0x3c
-#define OMAP_I2C_BUFSTAT_REG 0x40
+#define OMAP_I2C_WE_REG 0x03
+#define OMAP_I2C_SYSS_REG 0x04
+#define OMAP_I2C_BUF_REG 0x05
+#define OMAP_I2C_CNT_REG 0x06
+#define OMAP_I2C_DATA_REG 0x07
+#define OMAP_I2C_SYSC_REG 0x08
+#define OMAP_I2C_CON_REG 0x09
+#define OMAP_I2C_OA_REG 0x0a
+#define OMAP_I2C_SA_REG 0x0b
+#define OMAP_I2C_PSC_REG 0x0c
+#define OMAP_I2C_SCLL_REG 0x0d
+#define OMAP_I2C_SCLH_REG 0x0e
+#define OMAP_I2C_SYSTEST_REG 0x0f
+#define OMAP_I2C_BUFSTAT_REG 0x10
/* I2C Interrupt Enable Register (OMAP_I2C_IE): */
#define OMAP_I2C_IE_XDR (1 << 14) /* TX Buffer drain int enable */
@@ -161,6 +161,7 @@ struct omap_i2c_dev {
struct device *dev;
void __iomem *base; /* virtual */
int irq;
+ int reg_shift; /* bit shift for I2C register addresses */
struct clk *iclk; /* Interface clock */
struct clk *fclk; /* Functional clock */
struct completion cmd_complete;
@@ -189,12 +190,12 @@ struct omap_i2c_dev {
static inline void omap_i2c_write_reg(struct omap_i2c_dev *i2c_dev,
int reg, u16 val)
{
- __raw_writew(val, i2c_dev->base + reg);
+ __raw_writew(val, i2c_dev->base + (reg << i2c_dev->reg_shift));
}
static inline u16 omap_i2c_read_reg(struct omap_i2c_dev *i2c_dev, int reg)
{
- return __raw_readw(i2c_dev->base + reg);
+ return __raw_readw(i2c_dev->base + (reg << i2c_dev->reg_shift));
}
static int __init omap_i2c_get_clocks(struct omap_i2c_dev *dev)
@@ -924,6 +925,11 @@ omap_i2c_probe(struct platform_device *pdev)
dev->b_hw = 1; /* Enable hardware fixes */
}
+ if (cpu_is_omap7xx())
+ dev->reg_shift = 1;
+ else
+ dev->reg_shift = 2;
+
/* reset ASAP, clearing any IRQs */
omap_i2c_init(dev);
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 2b0bd0b042d6..9532dee6b580 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -172,12 +172,6 @@ static int i2c_pnx_master_xmit(struct i2c_pnx_algo_data *alg_data)
/* We still have something to talk about... */
val = *alg_data->mif.buf++;
- if (alg_data->mif.len == 1) {
- val |= stop_bit;
- if (!alg_data->last)
- val |= start_bit;
- }
-
alg_data->mif.len--;
iowrite32(val, I2C_REG_TX(alg_data));
@@ -251,11 +245,6 @@ static int i2c_pnx_master_rcv(struct i2c_pnx_algo_data *alg_data)
__func__);
if (alg_data->mif.len == 1) {
- /* Last byte, do not acknowledge next rcv. */
- val |= stop_bit;
- if (!alg_data->last)
- val |= start_bit;
-
/*
* Enable interrupt RFDAIE (data in Rx fifo),
* and disable DRMIE (need data for Tx)
diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c
new file mode 100644
index 000000000000..eece39a5a30e
--- /dev/null
+++ b/drivers/i2c/busses/i2c-xiic.c
@@ -0,0 +1,824 @@
+/*
+ * i2c-xiic.c
+ * Copyright (c) 2002-2007 Xilinx Inc.
+ * Copyright (c) 2009-2010 Intel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ * This code was implemented by Mocean Laboratories AB when porting linux
+ * to the automotive development board Russellville. The copyright holder
+ * as seen in the header is Intel corporation.
+ * Mocean Laboratories forked off the GNU/Linux platform work into a
+ * separate company called Pelagicore AB, which commited the code to the
+ * kernel.
+ */
+
+/* Supports:
+ * Xilinx IIC
+ */
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/errno.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/wait.h>
+#include <linux/i2c-xiic.h>
+#include <linux/io.h>
+
+#define DRIVER_NAME "xiic-i2c"
+
+enum xilinx_i2c_state {
+ STATE_DONE,
+ STATE_ERROR,
+ STATE_START
+};
+
+/**
+ * struct xiic_i2c - Internal representation of the XIIC I2C bus
+ * @base: Memory base of the HW registers
+ * @wait: Wait queue for callers
+ * @adap: Kernel adapter representation
+ * @tx_msg: Messages from above to be sent
+ * @lock: Mutual exclusion
+ * @tx_pos: Current pos in TX message
+ * @nmsgs: Number of messages in tx_msg
+ * @state: See STATE_
+ * @rx_msg: Current RX message
+ * @rx_pos: Position within current RX message
+ */
+struct xiic_i2c {
+ void __iomem *base;
+ wait_queue_head_t wait;
+ struct i2c_adapter adap;
+ struct i2c_msg *tx_msg;
+ spinlock_t lock;
+ unsigned int tx_pos;
+ unsigned int nmsgs;
+ enum xilinx_i2c_state state;
+ struct i2c_msg *rx_msg;
+ int rx_pos;
+};
+
+
+#define XIIC_MSB_OFFSET 0
+#define XIIC_REG_OFFSET (0x100+XIIC_MSB_OFFSET)
+
+/*
+ * Register offsets in bytes from RegisterBase. Three is added to the
+ * base offset to access LSB (IBM style) of the word
+ */
+#define XIIC_CR_REG_OFFSET (0x00+XIIC_REG_OFFSET) /* Control Register */
+#define XIIC_SR_REG_OFFSET (0x04+XIIC_REG_OFFSET) /* Status Register */
+#define XIIC_DTR_REG_OFFSET (0x08+XIIC_REG_OFFSET) /* Data Tx Register */
+#define XIIC_DRR_REG_OFFSET (0x0C+XIIC_REG_OFFSET) /* Data Rx Register */
+#define XIIC_ADR_REG_OFFSET (0x10+XIIC_REG_OFFSET) /* Address Register */
+#define XIIC_TFO_REG_OFFSET (0x14+XIIC_REG_OFFSET) /* Tx FIFO Occupancy */
+#define XIIC_RFO_REG_OFFSET (0x18+XIIC_REG_OFFSET) /* Rx FIFO Occupancy */
+#define XIIC_TBA_REG_OFFSET (0x1C+XIIC_REG_OFFSET) /* 10 Bit Address reg */
+#define XIIC_RFD_REG_OFFSET (0x20+XIIC_REG_OFFSET) /* Rx FIFO Depth reg */
+#define XIIC_GPO_REG_OFFSET (0x24+XIIC_REG_OFFSET) /* Output Register */
+
+/* Control Register masks */
+#define XIIC_CR_ENABLE_DEVICE_MASK 0x01 /* Device enable = 1 */
+#define XIIC_CR_TX_FIFO_RESET_MASK 0x02 /* Transmit FIFO reset=1 */
+#define XIIC_CR_MSMS_MASK 0x04 /* Master starts Txing=1 */
+#define XIIC_CR_DIR_IS_TX_MASK 0x08 /* Dir of tx. Txing=1 */
+#define XIIC_CR_NO_ACK_MASK 0x10 /* Tx Ack. NO ack = 1 */
+#define XIIC_CR_REPEATED_START_MASK 0x20 /* Repeated start = 1 */
+#define XIIC_CR_GENERAL_CALL_MASK 0x40 /* Gen Call enabled = 1 */
+
+/* Status Register masks */
+#define XIIC_SR_GEN_CALL_MASK 0x01 /* 1=a mstr issued a GC */
+#define XIIC_SR_ADDR_AS_SLAVE_MASK 0x02 /* 1=when addr as slave */
+#define XIIC_SR_BUS_BUSY_MASK 0x04 /* 1 = bus is busy */
+#define XIIC_SR_MSTR_RDING_SLAVE_MASK 0x08 /* 1=Dir: mstr <-- slave */
+#define XIIC_SR_TX_FIFO_FULL_MASK 0x10 /* 1 = Tx FIFO full */
+#define XIIC_SR_RX_FIFO_FULL_MASK 0x20 /* 1 = Rx FIFO full */
+#define XIIC_SR_RX_FIFO_EMPTY_MASK 0x40 /* 1 = Rx FIFO empty */
+#define XIIC_SR_TX_FIFO_EMPTY_MASK 0x80 /* 1 = Tx FIFO empty */
+
+/* Interrupt Status Register masks Interrupt occurs when... */
+#define XIIC_INTR_ARB_LOST_MASK 0x01 /* 1 = arbitration lost */
+#define XIIC_INTR_TX_ERROR_MASK 0x02 /* 1=Tx error/msg complete */
+#define XIIC_INTR_TX_EMPTY_MASK 0x04 /* 1 = Tx FIFO/reg empty */
+#define XIIC_INTR_RX_FULL_MASK 0x08 /* 1=Rx FIFO/reg=OCY level */
+#define XIIC_INTR_BNB_MASK 0x10 /* 1 = Bus not busy */
+#define XIIC_INTR_AAS_MASK 0x20 /* 1 = when addr as slave */
+#define XIIC_INTR_NAAS_MASK 0x40 /* 1 = not addr as slave */
+#define XIIC_INTR_TX_HALF_MASK 0x80 /* 1 = TX FIFO half empty */
+
+/* The following constants specify the depth of the FIFOs */
+#define IIC_RX_FIFO_DEPTH 16 /* Rx fifo capacity */
+#define IIC_TX_FIFO_DEPTH 16 /* Tx fifo capacity */
+
+/* The following constants specify groups of interrupts that are typically
+ * enabled or disables at the same time
+ */
+#define XIIC_TX_INTERRUPTS \
+(XIIC_INTR_TX_ERROR_MASK | XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)
+
+#define XIIC_TX_RX_INTERRUPTS (XIIC_INTR_RX_FULL_MASK | XIIC_TX_INTERRUPTS)
+
+/* The following constants are used with the following macros to specify the
+ * operation, a read or write operation.
+ */
+#define XIIC_READ_OPERATION 1
+#define XIIC_WRITE_OPERATION 0
+
+/*
+ * Tx Fifo upper bit masks.
+ */
+#define XIIC_TX_DYN_START_MASK 0x0100 /* 1 = Set dynamic start */
+#define XIIC_TX_DYN_STOP_MASK 0x0200 /* 1 = Set dynamic stop */
+
+/*
+ * The following constants define the register offsets for the Interrupt
+ * registers. There are some holes in the memory map for reserved addresses
+ * to allow other registers to be added and still match the memory map of the
+ * interrupt controller registers
+ */
+#define XIIC_DGIER_OFFSET 0x1C /* Device Global Interrupt Enable Register */
+#define XIIC_IISR_OFFSET 0x20 /* Interrupt Status Register */
+#define XIIC_IIER_OFFSET 0x28 /* Interrupt Enable Register */
+#define XIIC_RESETR_OFFSET 0x40 /* Reset Register */
+
+#define XIIC_RESET_MASK 0xAUL
+
+/*
+ * The following constant is used for the device global interrupt enable
+ * register, to enable all interrupts for the device, this is the only bit
+ * in the register
+ */
+#define XIIC_GINTR_ENABLE_MASK 0x80000000UL
+
+#define xiic_tx_space(i2c) ((i2c)->tx_msg->len - (i2c)->tx_pos)
+#define xiic_rx_space(i2c) ((i2c)->rx_msg->len - (i2c)->rx_pos)
+
+static void xiic_start_xfer(struct xiic_i2c *i2c);
+static void __xiic_start_xfer(struct xiic_i2c *i2c);
+
+static inline void xiic_setreg8(struct xiic_i2c *i2c, int reg, u8 value)
+{
+ iowrite8(value, i2c->base + reg);
+}
+
+static inline u8 xiic_getreg8(struct xiic_i2c *i2c, int reg)
+{
+ return ioread8(i2c->base + reg);
+}
+
+static inline void xiic_setreg16(struct xiic_i2c *i2c, int reg, u16 value)
+{
+ iowrite16(value, i2c->base + reg);
+}
+
+static inline void xiic_setreg32(struct xiic_i2c *i2c, int reg, int value)
+{
+ iowrite32(value, i2c->base + reg);
+}
+
+static inline int xiic_getreg32(struct xiic_i2c *i2c, int reg)
+{
+ return ioread32(i2c->base + reg);
+}
+
+static inline void xiic_irq_dis(struct xiic_i2c *i2c, u32 mask)
+{
+ u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+ xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier & ~mask);
+}
+
+static inline void xiic_irq_en(struct xiic_i2c *i2c, u32 mask)
+{
+ u32 ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+ xiic_setreg32(i2c, XIIC_IIER_OFFSET, ier | mask);
+}
+
+static inline void xiic_irq_clr(struct xiic_i2c *i2c, u32 mask)
+{
+ u32 isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+ xiic_setreg32(i2c, XIIC_IISR_OFFSET, isr & mask);
+}
+
+static inline void xiic_irq_clr_en(struct xiic_i2c *i2c, u32 mask)
+{
+ xiic_irq_clr(i2c, mask);
+ xiic_irq_en(i2c, mask);
+}
+
+static void xiic_clear_rx_fifo(struct xiic_i2c *i2c)
+{
+ u8 sr;
+ for (sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
+ !(sr & XIIC_SR_RX_FIFO_EMPTY_MASK);
+ sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET))
+ xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
+}
+
+static void xiic_reinit(struct xiic_i2c *i2c)
+{
+ xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
+
+ /* Set receive Fifo depth to maximum (zero based). */
+ xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, IIC_RX_FIFO_DEPTH - 1);
+
+ /* Reset Tx Fifo. */
+ xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_TX_FIFO_RESET_MASK);
+
+ /* Enable IIC Device, remove Tx Fifo reset & disable general call. */
+ xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, XIIC_CR_ENABLE_DEVICE_MASK);
+
+ /* make sure RX fifo is empty */
+ xiic_clear_rx_fifo(i2c);
+
+ /* Enable interrupts */
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
+
+ xiic_irq_clr_en(i2c, XIIC_INTR_AAS_MASK | XIIC_INTR_ARB_LOST_MASK);
+}
+
+static void xiic_deinit(struct xiic_i2c *i2c)
+{
+ u8 cr;
+
+ xiic_setreg32(i2c, XIIC_RESETR_OFFSET, XIIC_RESET_MASK);
+
+ /* Disable IIC Device. */
+ cr = xiic_getreg8(i2c, XIIC_CR_REG_OFFSET);
+ xiic_setreg8(i2c, XIIC_CR_REG_OFFSET, cr & ~XIIC_CR_ENABLE_DEVICE_MASK);
+}
+
+static void xiic_read_rx(struct xiic_i2c *i2c)
+{
+ u8 bytes_in_fifo;
+ int i;
+
+ bytes_in_fifo = xiic_getreg8(i2c, XIIC_RFO_REG_OFFSET) + 1;
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, bytes in fifo: %d, msg: %d"
+ ", SR: 0x%x, CR: 0x%x\n",
+ __func__, bytes_in_fifo, xiic_rx_space(i2c),
+ xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
+ xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
+
+ if (bytes_in_fifo > xiic_rx_space(i2c))
+ bytes_in_fifo = xiic_rx_space(i2c);
+
+ for (i = 0; i < bytes_in_fifo; i++)
+ i2c->rx_msg->buf[i2c->rx_pos++] =
+ xiic_getreg8(i2c, XIIC_DRR_REG_OFFSET);
+
+ xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET,
+ (xiic_rx_space(i2c) > IIC_RX_FIFO_DEPTH) ?
+ IIC_RX_FIFO_DEPTH - 1 : xiic_rx_space(i2c) - 1);
+}
+
+static int xiic_tx_fifo_space(struct xiic_i2c *i2c)
+{
+ /* return the actual space left in the FIFO */
+ return IIC_TX_FIFO_DEPTH - xiic_getreg8(i2c, XIIC_TFO_REG_OFFSET) - 1;
+}
+
+static void xiic_fill_tx_fifo(struct xiic_i2c *i2c)
+{
+ u8 fifo_space = xiic_tx_fifo_space(i2c);
+ int len = xiic_tx_space(i2c);
+
+ len = (len > fifo_space) ? fifo_space : len;
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, len: %d, fifo space: %d\n",
+ __func__, len, fifo_space);
+
+ while (len--) {
+ u16 data = i2c->tx_msg->buf[i2c->tx_pos++];
+ if ((xiic_tx_space(i2c) == 0) && (i2c->nmsgs == 1)) {
+ /* last message in transfer -> STOP */
+ data |= XIIC_TX_DYN_STOP_MASK;
+ dev_dbg(i2c->adap.dev.parent, "%s TX STOP\n", __func__);
+
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
+ } else
+ xiic_setreg8(i2c, XIIC_DTR_REG_OFFSET, data);
+ }
+}
+
+static void xiic_wakeup(struct xiic_i2c *i2c, int code)
+{
+ i2c->tx_msg = NULL;
+ i2c->rx_msg = NULL;
+ i2c->nmsgs = 0;
+ i2c->state = code;
+ wake_up(&i2c->wait);
+}
+
+static void xiic_process(struct xiic_i2c *i2c)
+{
+ u32 pend, isr, ier;
+ u32 clr = 0;
+
+ /* Get the interrupt Status from the IPIF. There is no clearing of
+ * interrupts in the IPIF. Interrupts must be cleared at the source.
+ * To find which interrupts are pending; AND interrupts pending with
+ * interrupts masked.
+ */
+ isr = xiic_getreg32(i2c, XIIC_IISR_OFFSET);
+ ier = xiic_getreg32(i2c, XIIC_IIER_OFFSET);
+ pend = isr & ier;
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, IER: 0x%x, ISR: 0x%x, "
+ "pend: 0x%x, SR: 0x%x, msg: %p, nmsgs: %d\n",
+ __func__, ier, isr, pend, xiic_getreg8(i2c, XIIC_SR_REG_OFFSET),
+ i2c->tx_msg, i2c->nmsgs);
+
+ /* Do not processes a devices interrupts if the device has no
+ * interrupts pending
+ */
+ if (!pend)
+ return;
+
+ /* Service requesting interrupt */
+ if ((pend & XIIC_INTR_ARB_LOST_MASK) ||
+ ((pend & XIIC_INTR_TX_ERROR_MASK) &&
+ !(pend & XIIC_INTR_RX_FULL_MASK))) {
+ /* bus arbritration lost, or...
+ * Transmit error _OR_ RX completed
+ * if this happens when RX_FULL is not set
+ * this is probably a TX error
+ */
+
+ dev_dbg(i2c->adap.dev.parent, "%s error\n", __func__);
+
+ /* dynamic mode seem to suffer from problems if we just flushes
+ * fifos and the next message is a TX with len 0 (only addr)
+ * reset the IP instead of just flush fifos
+ */
+ xiic_reinit(i2c);
+
+ if (i2c->tx_msg)
+ xiic_wakeup(i2c, STATE_ERROR);
+
+ } else if (pend & XIIC_INTR_RX_FULL_MASK) {
+ /* Receive register/FIFO is full */
+
+ clr = XIIC_INTR_RX_FULL_MASK;
+ if (!i2c->rx_msg) {
+ dev_dbg(i2c->adap.dev.parent,
+ "%s unexpexted RX IRQ\n", __func__);
+ xiic_clear_rx_fifo(i2c);
+ goto out;
+ }
+
+ xiic_read_rx(i2c);
+ if (xiic_rx_space(i2c) == 0) {
+ /* this is the last part of the message */
+ i2c->rx_msg = NULL;
+
+ /* also clear TX error if there (RX complete) */
+ clr |= (isr & XIIC_INTR_TX_ERROR_MASK);
+
+ dev_dbg(i2c->adap.dev.parent,
+ "%s end of message, nmsgs: %d\n",
+ __func__, i2c->nmsgs);
+
+ /* send next message if this wasn't the last,
+ * otherwise the transfer will be finialise when
+ * receiving the bus not busy interrupt
+ */
+ if (i2c->nmsgs > 1) {
+ i2c->nmsgs--;
+ i2c->tx_msg++;
+ dev_dbg(i2c->adap.dev.parent,
+ "%s will start next...\n", __func__);
+
+ __xiic_start_xfer(i2c);
+ }
+ }
+ } else if (pend & XIIC_INTR_BNB_MASK) {
+ /* IIC bus has transitioned to not busy */
+ clr = XIIC_INTR_BNB_MASK;
+
+ /* The bus is not busy, disable BusNotBusy interrupt */
+ xiic_irq_dis(i2c, XIIC_INTR_BNB_MASK);
+
+ if (!i2c->tx_msg)
+ goto out;
+
+ if ((i2c->nmsgs == 1) && !i2c->rx_msg &&
+ xiic_tx_space(i2c) == 0)
+ xiic_wakeup(i2c, STATE_DONE);
+ else
+ xiic_wakeup(i2c, STATE_ERROR);
+
+ } else if (pend & (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK)) {
+ /* Transmit register/FIFO is empty or ½ empty */
+
+ clr = pend &
+ (XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_HALF_MASK);
+
+ if (!i2c->tx_msg) {
+ dev_dbg(i2c->adap.dev.parent,
+ "%s unexpexted TX IRQ\n", __func__);
+ goto out;
+ }
+
+ xiic_fill_tx_fifo(i2c);
+
+ /* current message sent and there is space in the fifo */
+ if (!xiic_tx_space(i2c) && xiic_tx_fifo_space(i2c) >= 2) {
+ dev_dbg(i2c->adap.dev.parent,
+ "%s end of message sent, nmsgs: %d\n",
+ __func__, i2c->nmsgs);
+ if (i2c->nmsgs > 1) {
+ i2c->nmsgs--;
+ i2c->tx_msg++;
+ __xiic_start_xfer(i2c);
+ } else {
+ xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
+
+ dev_dbg(i2c->adap.dev.parent,
+ "%s Got TX IRQ but no more to do...\n",
+ __func__);
+ }
+ } else if (!xiic_tx_space(i2c) && (i2c->nmsgs == 1))
+ /* current frame is sent and is last,
+ * make sure to disable tx half
+ */
+ xiic_irq_dis(i2c, XIIC_INTR_TX_HALF_MASK);
+ } else {
+ /* got IRQ which is not acked */
+ dev_err(i2c->adap.dev.parent, "%s Got unexpected IRQ\n",
+ __func__);
+ clr = pend;
+ }
+out:
+ dev_dbg(i2c->adap.dev.parent, "%s clr: 0x%x\n", __func__, clr);
+
+ xiic_setreg32(i2c, XIIC_IISR_OFFSET, clr);
+}
+
+static int xiic_bus_busy(struct xiic_i2c *i2c)
+{
+ u8 sr = xiic_getreg8(i2c, XIIC_SR_REG_OFFSET);
+
+ return (sr & XIIC_SR_BUS_BUSY_MASK) ? -EBUSY : 0;
+}
+
+static int xiic_busy(struct xiic_i2c *i2c)
+{
+ int tries = 3;
+ int err;
+
+ if (i2c->tx_msg)
+ return -EBUSY;
+
+ /* for instance if previous transfer was terminated due to TX error
+ * it might be that the bus is on it's way to become available
+ * give it at most 3 ms to wake
+ */
+ err = xiic_bus_busy(i2c);
+ while (err && tries--) {
+ mdelay(1);
+ err = xiic_bus_busy(i2c);
+ }
+
+ return err;
+}
+
+static void xiic_start_recv(struct xiic_i2c *i2c)
+{
+ u8 rx_watermark;
+ struct i2c_msg *msg = i2c->rx_msg = i2c->tx_msg;
+
+ /* Clear and enable Rx full interrupt. */
+ xiic_irq_clr_en(i2c, XIIC_INTR_RX_FULL_MASK | XIIC_INTR_TX_ERROR_MASK);
+
+ /* we want to get all but last byte, because the TX_ERROR IRQ is used
+ * to inidicate error ACK on the address, and negative ack on the last
+ * received byte, so to not mix them receive all but last.
+ * In the case where there is only one byte to receive
+ * we can check if ERROR and RX full is set at the same time
+ */
+ rx_watermark = msg->len;
+ if (rx_watermark > IIC_RX_FIFO_DEPTH)
+ rx_watermark = IIC_RX_FIFO_DEPTH;
+ xiic_setreg8(i2c, XIIC_RFD_REG_OFFSET, rx_watermark - 1);
+
+ if (!(msg->flags & I2C_M_NOSTART))
+ /* write the address */
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
+ (msg->addr << 1) | XIIC_READ_OPERATION |
+ XIIC_TX_DYN_START_MASK);
+
+ xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
+
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET,
+ msg->len | ((i2c->nmsgs == 1) ? XIIC_TX_DYN_STOP_MASK : 0));
+ if (i2c->nmsgs == 1)
+ /* very last, enable bus not busy as well */
+ xiic_irq_clr_en(i2c, XIIC_INTR_BNB_MASK);
+
+ /* the message is tx:ed */
+ i2c->tx_pos = msg->len;
+}
+
+static void xiic_start_send(struct xiic_i2c *i2c)
+{
+ struct i2c_msg *msg = i2c->tx_msg;
+
+ xiic_irq_clr(i2c, XIIC_INTR_TX_ERROR_MASK);
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, len: %d, "
+ "ISR: 0x%x, CR: 0x%x\n",
+ __func__, msg, msg->len, xiic_getreg32(i2c, XIIC_IISR_OFFSET),
+ xiic_getreg8(i2c, XIIC_CR_REG_OFFSET));
+
+ if (!(msg->flags & I2C_M_NOSTART)) {
+ /* write the address */
+ u16 data = ((msg->addr << 1) & 0xfe) | XIIC_WRITE_OPERATION |
+ XIIC_TX_DYN_START_MASK;
+ if ((i2c->nmsgs == 1) && msg->len == 0)
+ /* no data and last message -> add STOP */
+ data |= XIIC_TX_DYN_STOP_MASK;
+
+ xiic_setreg16(i2c, XIIC_DTR_REG_OFFSET, data);
+ }
+
+ xiic_fill_tx_fifo(i2c);
+
+ /* Clear any pending Tx empty, Tx Error and then enable them. */
+ xiic_irq_clr_en(i2c, XIIC_INTR_TX_EMPTY_MASK | XIIC_INTR_TX_ERROR_MASK |
+ XIIC_INTR_BNB_MASK);
+}
+
+static irqreturn_t xiic_isr(int irq, void *dev_id)
+{
+ struct xiic_i2c *i2c = dev_id;
+
+ spin_lock(&i2c->lock);
+ /* disable interrupts globally */
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0);
+
+ dev_dbg(i2c->adap.dev.parent, "%s entry\n", __func__);
+
+ xiic_process(i2c);
+
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
+ spin_unlock(&i2c->lock);
+
+ return IRQ_HANDLED;
+}
+
+static void __xiic_start_xfer(struct xiic_i2c *i2c)
+{
+ int first = 1;
+ int fifo_space = xiic_tx_fifo_space(i2c);
+ dev_dbg(i2c->adap.dev.parent, "%s entry, msg: %p, fifos space: %d\n",
+ __func__, i2c->tx_msg, fifo_space);
+
+ if (!i2c->tx_msg)
+ return;
+
+ i2c->rx_pos = 0;
+ i2c->tx_pos = 0;
+ i2c->state = STATE_START;
+ while ((fifo_space >= 2) && (first || (i2c->nmsgs > 1))) {
+ if (!first) {
+ i2c->nmsgs--;
+ i2c->tx_msg++;
+ i2c->tx_pos = 0;
+ } else
+ first = 0;
+
+ if (i2c->tx_msg->flags & I2C_M_RD) {
+ /* we dont date putting several reads in the FIFO */
+ xiic_start_recv(i2c);
+ return;
+ } else {
+ xiic_start_send(i2c);
+ if (xiic_tx_space(i2c) != 0) {
+ /* the message could not be completely sent */
+ break;
+ }
+ }
+
+ fifo_space = xiic_tx_fifo_space(i2c);
+ }
+
+ /* there are more messages or the current one could not be completely
+ * put into the FIFO, also enable the half empty interrupt
+ */
+ if (i2c->nmsgs > 1 || xiic_tx_space(i2c))
+ xiic_irq_clr_en(i2c, XIIC_INTR_TX_HALF_MASK);
+
+}
+
+static void xiic_start_xfer(struct xiic_i2c *i2c)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&i2c->lock, flags);
+ xiic_reinit(i2c);
+ /* disable interrupts globally */
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, 0);
+ spin_unlock_irqrestore(&i2c->lock, flags);
+
+ __xiic_start_xfer(i2c);
+ xiic_setreg32(i2c, XIIC_DGIER_OFFSET, XIIC_GINTR_ENABLE_MASK);
+}
+
+static int xiic_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
+{
+ struct xiic_i2c *i2c = i2c_get_adapdata(adap);
+ int err;
+
+ dev_dbg(adap->dev.parent, "%s entry SR: 0x%x\n", __func__,
+ xiic_getreg8(i2c, XIIC_SR_REG_OFFSET));
+
+ err = xiic_busy(i2c);
+ if (err)
+ return err;
+
+ i2c->tx_msg = msgs;
+ i2c->nmsgs = num;
+
+ xiic_start_xfer(i2c);
+
+ if (wait_event_timeout(i2c->wait, (i2c->state == STATE_ERROR) ||
+ (i2c->state == STATE_DONE), HZ))
+ return (i2c->state == STATE_DONE) ? num : -EIO;
+ else {
+ i2c->tx_msg = NULL;
+ i2c->rx_msg = NULL;
+ i2c->nmsgs = 0;
+ return -ETIMEDOUT;
+ }
+}
+
+static u32 xiic_func(struct i2c_adapter *adap)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL;
+}
+
+static const struct i2c_algorithm xiic_algorithm = {
+ .master_xfer = xiic_xfer,
+ .functionality = xiic_func,
+};
+
+static struct i2c_adapter xiic_adapter = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ .class = I2C_CLASS_HWMON | I2C_CLASS_SPD,
+ .algo = &xiic_algorithm,
+};
+
+
+static int __devinit xiic_i2c_probe(struct platform_device *pdev)
+{
+ struct xiic_i2c *i2c;
+ struct xiic_i2c_platform_data *pdata;
+ struct resource *res;
+ int ret, irq;
+ u8 i;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res)
+ goto resource_missing;
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0)
+ goto resource_missing;
+
+ pdata = (struct xiic_i2c_platform_data *) pdev->dev.platform_data;
+ if (!pdata)
+ return -EINVAL;
+
+ i2c = kzalloc(sizeof(*i2c), GFP_KERNEL);
+ if (!i2c)
+ return -ENOMEM;
+
+ if (!request_mem_region(res->start, resource_size(res), pdev->name)) {
+ dev_err(&pdev->dev, "Memory region busy\n");
+ ret = -EBUSY;
+ goto request_mem_failed;
+ }
+
+ i2c->base = ioremap(res->start, resource_size(res));
+ if (!i2c->base) {
+ dev_err(&pdev->dev, "Unable to map registers\n");
+ ret = -EIO;
+ goto map_failed;
+ }
+
+ /* hook up driver to tree */
+ platform_set_drvdata(pdev, i2c);
+ i2c->adap = xiic_adapter;
+ i2c_set_adapdata(&i2c->adap, i2c);
+ i2c->adap.dev.parent = &pdev->dev;
+
+ xiic_reinit(i2c);
+
+ spin_lock_init(&i2c->lock);
+ init_waitqueue_head(&i2c->wait);
+ ret = request_irq(irq, xiic_isr, 0, pdev->name, i2c);
+ if (ret) {
+ dev_err(&pdev->dev, "Cannot claim IRQ\n");
+ goto request_irq_failed;
+ }
+
+ /* add i2c adapter to i2c tree */
+ ret = i2c_add_adapter(&i2c->adap);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add adapter\n");
+ goto add_adapter_failed;
+ }
+
+ /* add in known devices to the bus */
+ for (i = 0; i < pdata->num_devices; i++)
+ i2c_new_device(&i2c->adap, pdata->devices + i);
+
+ return 0;
+
+add_adapter_failed:
+ free_irq(irq, i2c);
+request_irq_failed:
+ xiic_deinit(i2c);
+ iounmap(i2c->base);
+map_failed:
+ release_mem_region(res->start, resource_size(res));
+request_mem_failed:
+ kfree(i2c);
+
+ return ret;
+resource_missing:
+ dev_err(&pdev->dev, "IRQ or Memory resource is missing\n");
+ return -ENOENT;
+}
+
+static int __devexit xiic_i2c_remove(struct platform_device* pdev)
+{
+ struct xiic_i2c *i2c = platform_get_drvdata(pdev);
+ struct resource *res;
+
+ /* remove adapter & data */
+ i2c_del_adapter(&i2c->adap);
+
+ xiic_deinit(i2c);
+
+ platform_set_drvdata(pdev, NULL);
+
+ free_irq(platform_get_irq(pdev, 0), i2c);
+
+ iounmap(i2c->base);
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (res)
+ release_mem_region(res->start, resource_size(res));
+
+ kfree(i2c);
+
+ return 0;
+}
+
+
+/* work with hotplug and coldplug */
+MODULE_ALIAS("platform:"DRIVER_NAME);
+
+static struct platform_driver xiic_i2c_driver = {
+ .probe = xiic_i2c_probe,
+ .remove = __devexit_p(xiic_i2c_remove),
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = DRIVER_NAME,
+ },
+};
+
+static int __init xiic_i2c_init(void)
+{
+ return platform_driver_register(&xiic_i2c_driver);
+}
+
+static void __exit xiic_i2c_exit(void)
+{
+ platform_driver_unregister(&xiic_i2c_driver);
+}
+
+module_init(xiic_i2c_init);
+module_exit(xiic_i2c_exit);
+
+MODULE_AUTHOR("info@mocean-labs.com");
+MODULE_DESCRIPTION("Xilinx I2C bus driver");
+MODULE_LICENSE("GPL v2");