summaryrefslogtreecommitdiff
path: root/drivers/i2c
diff options
context:
space:
mode:
authorRudolf Marek <r.marek@assembler.cz>2013-07-14 23:17:26 +0200
committerWolfram Sang <wsa@the-dreams.de>2013-08-15 15:17:31 +0200
commita94dd00f2e1c20deacffadaaa6eebf73b217c907 (patch)
tree904a001e72ac288a1b109c58c95f055c08b68cd5 /drivers/i2c
parentd63a9e851c2c007d9129b8dbfc1af24722bd18bd (diff)
i2c: piix4: Add support for secondary SMBus on AMD SB800 and AMD FCH chipsets
Add support for the secondary SMBus controller on the AMD SB800 and AMD FCH chipsets. Signed-off-by: Rudolf Marek <r.marek@assembler.cz> Tested-by: Paul Menzel <paulepanter@users.sourceforge.net> Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-piix4.c41
1 files changed, 31 insertions, 10 deletions
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index d05ad590af29..a028617b8f13 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -231,11 +231,11 @@ static int piix4_setup(struct pci_dev *PIIX4_dev,
}
static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
- const struct pci_device_id *id)
+ const struct pci_device_id *id, u8 aux)
{
unsigned short piix4_smba;
unsigned short smba_idx = 0xcd6;
- u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
+ u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en;
/* SB800 and later SMBus does not support forcing address */
if (force || force_addr) {
@@ -245,6 +245,8 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
}
/* Determine the address of the SMBus areas */
+ smb_en = (aux) ? 0x28 : 0x2c;
+
if (!request_region(smba_idx, 2, "smba_idx")) {
dev_err(&PIIX4_dev->dev, "SMBus base address index region "
"0x%x already in use!\n", smba_idx);
@@ -272,6 +274,13 @@ static int piix4_setup_sb800(struct pci_dev *PIIX4_dev,
return -EBUSY;
}
+ /* Aux SMBus does not support IRQ information */
+ if (aux) {
+ dev_info(&PIIX4_dev->dev,
+ "SMBus Host Controller at 0x%x\n", piix4_smba);
+ return piix4_smba;
+ }
+
/* Request the SMBus I2C bus config region */
if (!request_region(piix4_smba + i2ccfg_offset, 1, "i2ccfg")) {
dev_err(&PIIX4_dev->dev, "SMBus I2C bus config region "
@@ -597,7 +606,7 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
dev->revision >= 0x40) ||
dev->vendor == PCI_VENDOR_ID_AMD)
/* base address location etc changed in SB800 */
- retval = piix4_setup_sb800(dev, id);
+ retval = piix4_setup_sb800(dev, id, 0);
else
retval = piix4_setup(dev, id);
@@ -611,17 +620,29 @@ static int piix4_probe(struct pci_dev *dev, const struct pci_device_id *id)
return retval;
/* Check for auxiliary SMBus on some AMD chipsets */
+ retval = -ENODEV;
+
if (dev->vendor == PCI_VENDOR_ID_ATI &&
- dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS &&
- dev->revision < 0x40) {
- retval = piix4_setup_aux(dev, id, 0x58);
- if (retval > 0) {
- /* Try to add the aux adapter if it exists,
- * piix4_add_adapter will clean up if this fails */
- piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+ dev->device == PCI_DEVICE_ID_ATI_SBX00_SMBUS) {
+ if (dev->revision < 0x40) {
+ retval = piix4_setup_aux(dev, id, 0x58);
+ } else {
+ /* SB800 added aux bus too */
+ retval = piix4_setup_sb800(dev, id, 1);
}
}
+ if (dev->vendor == PCI_VENDOR_ID_AMD &&
+ dev->device == PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) {
+ retval = piix4_setup_sb800(dev, id, 1);
+ }
+
+ if (retval > 0) {
+ /* Try to add the aux adapter if it exists,
+ * piix4_add_adapter will clean up if this fails */
+ piix4_add_adapter(dev, retval, &piix4_aux_adapter);
+ }
+
return 0;
}