summaryrefslogtreecommitdiff
path: root/drivers/ide/Kconfig
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/Kconfig
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/ide/Kconfig')
-rw-r--r--drivers/ide/Kconfig1056
1 files changed, 1056 insertions, 0 deletions
diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig
new file mode 100644
index 000000000000..3ac0a535b4aa
--- /dev/null
+++ b/drivers/ide/Kconfig
@@ -0,0 +1,1056 @@
+#
+# IDE ATA ATAPI Block device driver configuration
+#
+# Andre Hedrick <andre@linux-ide.org>
+#
+
+menu "ATA/ATAPI/MFM/RLL support"
+
+config IDE
+ tristate "ATA/ATAPI/MFM/RLL support"
+ ---help---
+ If you say Y here, your kernel will be able to manage low cost mass
+ storage units such as ATA/(E)IDE and ATAPI units. The most common
+ cases are IDE hard drives and ATAPI CD-ROM drives.
+
+ If your system is pure SCSI and doesn't use these interfaces, you
+ can say N here.
+
+ Integrated Disk Electronics (IDE aka ATA-1) is a connecting standard
+ for mass storage units such as hard disks. It was designed by
+ Western Digital and Compaq Computer in 1984. It was then named
+ ST506. Quite a number of disks use the IDE interface.
+
+ AT Attachment (ATA) is the superset of the IDE specifications.
+ ST506 was also called ATA-1.
+
+ Fast-IDE is ATA-2 (also named Fast ATA), Enhanced IDE (EIDE) is
+ ATA-3. It provides support for larger disks (up to 8.4GB by means of
+ the LBA standard), more disks (4 instead of 2) and for other mass
+ storage units such as tapes and cdrom. UDMA/33 (aka UltraDMA/33) is
+ ATA-4 and provides faster (and more CPU friendly) transfer modes
+ than previous PIO (Programmed processor Input/Output) from previous
+ ATA/IDE standards by means of fast DMA controllers.
+
+ ATA Packet Interface (ATAPI) is a protocol used by EIDE tape and
+ CD-ROM drives, similar in many respects to the SCSI protocol.
+
+ SMART IDE (Self Monitoring, Analysis and Reporting Technology) was
+ designed in order to prevent data corruption and disk crash by
+ detecting pre hardware failure conditions (heat, access time, and
+ the like...). Disks built since June 1995 may follow this standard.
+ The kernel itself doesn't manage this; however there are quite a
+ number of user programs such as smart that can query the status of
+ SMART parameters from disk drives.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ide.
+
+ For further information, please read <file:Documentation/ide.txt>.
+
+ If unsure, say Y.
+
+if IDE
+
+config IDE_MAX_HWIFS
+ int "Max IDE interfaces"
+ depends on ALPHA || SUPERH
+ default 4
+ help
+ This is the maximum number of IDE hardware interfaces that will
+ be supported by the driver. Make sure it is at least as high as
+ the number of IDE interfaces in your system.
+
+config BLK_DEV_IDE
+ tristate "Enhanced IDE/MFM/RLL disk/cdrom/tape/floppy support"
+ ---help---
+ If you say Y here, you will use the full-featured IDE driver to
+ control up to ten ATA/IDE interfaces, each being able to serve a
+ "master" and a "slave" device, for a total of up to twenty ATA/IDE
+ disk/cdrom/tape/floppy drives.
+
+ Useful information about large (>540 MB) IDE disks, multiple
+ interfaces, what to do if ATA/IDE devices are not automatically
+ detected, sound card ATA/IDE ports, module support, and other
+ topics, is contained in <file:Documentation/ide.txt>. For detailed
+ information about hard drives, consult the Disk-HOWTO and the
+ Multi-Disk-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To fine-tune ATA/IDE drive/interface parameters for improved
+ performance, look for the hdparm package at
+ <ftp://ibiblio.org/pub/Linux/system/hardware/>.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/ide.txt>. The module will be called ide-mod.
+ Do not compile this driver as a module if your root file system (the
+ one containing the directory /) is located on an IDE device.
+
+ If you have one or more IDE drives, say Y or M here. If your system
+ has no IDE drives, or if memory requirements are really tight, you
+ could say N here, and select the "Old hard disk driver" below
+ instead to save about 13 KB of memory in the kernel.
+
+if BLK_DEV_IDE
+
+comment "Please see Documentation/ide.txt for help/info on IDE drives"
+
+config BLK_DEV_IDE_SATA
+ bool "Support for SATA (deprecated; conflicts with libata SATA driver)"
+ default n
+ ---help---
+ There are two drivers for Serial ATA controllers.
+
+ The main driver, "libata", exists inside the SCSI subsystem
+ and supports most modern SATA controllers.
+
+ The IDE driver (which you are currently configuring) supports
+ a few first-generation SATA controllers.
+
+ In order to eliminate conflicts between the two subsystems,
+ this config option enables the IDE driver's SATA support.
+ Normally this is disabled, as it is preferred that libata
+ supports SATA controllers, and this (IDE) driver supports
+ PATA controllers.
+
+ If unsure, say N.
+
+config BLK_DEV_HD_IDE
+ bool "Use old disk-only driver on primary interface"
+ depends on (X86 || SH_MPC1211)
+ ---help---
+ There are two drivers for MFM/RLL/IDE disks. Most people use just
+ the new enhanced driver by itself. This option however installs the
+ old hard disk driver to control the primary IDE/disk interface in
+ the system, leaving the new enhanced IDE driver to take care of only
+ the 2nd/3rd/4th IDE interfaces. Doing this will prevent you from
+ having an IDE/ATAPI CD-ROM or tape drive connected to the primary
+ IDE interface. Choosing this option may be useful for older systems
+ which have MFM/RLL/ESDI controller+drives at the primary port
+ address (0x1f0), along with IDE drives at the secondary/3rd/4th port
+ addresses.
+
+ Normally, just say N here; you will then use the new driver for all
+ 4 interfaces.
+
+config BLK_DEV_IDEDISK
+ tristate "Include IDE/ATA-2 DISK support"
+ ---help---
+ This will include enhanced support for MFM/RLL/IDE hard disks. If
+ you have a MFM/RLL/IDE disk, and there is no special reason to use
+ the old hard disk driver instead, say Y. If you have an SCSI-only
+ system, you can say N here.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ide-disk.
+ Do not compile this driver as a module if your root file system
+ (the one containing the directory /) is located on the IDE disk.
+
+ If unsure, say Y.
+
+config IDEDISK_MULTI_MODE
+ bool "Use multi-mode by default"
+ help
+ If you get this error, try to say Y here:
+
+ hda: set_multmode: status=0x51 { DriveReady SeekComplete Error }
+ hda: set_multmode: error=0x04 { DriveStatusError }
+
+ If in doubt, say N.
+
+config BLK_DEV_IDECS
+ tristate "PCMCIA IDE support"
+ depends on PCMCIA
+ help
+ Support for outboard IDE disks, tape drives, and CD-ROM drives
+ connected through a PCMCIA card.
+
+config BLK_DEV_IDECD
+ tristate "Include IDE/ATAPI CDROM support"
+ ---help---
+ If you have a CD-ROM drive using the ATAPI protocol, say Y. ATAPI is
+ a newer protocol used by IDE CD-ROM and TAPE drives, similar to the
+ SCSI protocol. Most new CD-ROM drives use ATAPI, including the
+ NEC-260, Mitsumi FX400, Sony 55E, and just about all non-SCSI
+ double(2X) or better speed drives.
+
+ If you say Y here, the CD-ROM drive will be identified at boot time
+ along with other IDE devices, as "hdb" or "hdc", or something
+ similar (check the boot messages with dmesg). If this is your only
+ CD-ROM drive, you can say N to all other CD-ROM options, but be sure
+ to say Y or M to "ISO 9660 CD-ROM file system support".
+
+ Note that older versions of LILO (LInux LOader) cannot properly deal
+ with IDE/ATAPI CD-ROMs, so install LILO 16 or higher, available from
+ <http://lilo.go.dyndns.org/>.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ide-cd.
+
+config BLK_DEV_IDETAPE
+ tristate "Include IDE/ATAPI TAPE support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ If you have an IDE tape drive using the ATAPI protocol, say Y.
+ ATAPI is a newer protocol used by IDE tape and CD-ROM drives,
+ similar to the SCSI protocol. If you have an SCSI tape drive
+ however, you can say N here.
+
+ You should also say Y if you have an OnStream DI-30 tape drive; this
+ will not work with the SCSI protocol, until there is support for the
+ SC-30 and SC-50 versions.
+
+ If you say Y here, the tape drive will be identified at boot time
+ along with other IDE devices, as "hdb" or "hdc", or something
+ similar, and will be mapped to a character device such as "ht0"
+ (check the boot messages with dmesg). Be sure to consult the
+ <file:drivers/ide/ide-tape.c> and <file:Documentation/ide.txt> files
+ for usage information.
+
+ To compile this driver as a module, choose M here: the
+ module will be called ide-tape.
+
+config BLK_DEV_IDEFLOPPY
+ tristate "Include IDE/ATAPI FLOPPY support"
+ ---help---
+ If you have an IDE floppy drive which uses the ATAPI protocol,
+ answer Y. ATAPI is a newer protocol used by IDE CD-ROM/tape/floppy
+ drives, similar to the SCSI protocol.
+
+ The LS-120 and the IDE/ATAPI Iomega ZIP drive are also supported by
+ this driver. For information about jumper settings and the question
+ of when a ZIP drive uses a partition table, see
+ <http://www.win.tue.nl/~aeb/linux/zip/zip-1.html>.
+ (ATAPI PD-CD/CDR drives are not supported by this driver; support
+ for PD-CD/CDR drives is available if you answer Y to
+ "SCSI emulation support", below).
+
+ If you say Y here, the FLOPPY drive will be identified along with
+ other IDE devices, as "hdb" or "hdc", or something similar (check
+ the boot messages with dmesg).
+
+ To compile this driver as a module, choose M here: the
+ module will be called ide-floppy.
+
+config BLK_DEV_IDESCSI
+ tristate "SCSI emulation support"
+ depends on SCSI
+ ---help---
+ WARNING: ide-scsi is no longer needed for cd writing applications!
+ The 2.6 kernel supports direct writing to ide-cd, which eliminates
+ the need for ide-scsi + the entire scsi stack just for writing a
+ cd. The new method is more efficient in every way.
+
+ This will provide SCSI host adapter emulation for IDE ATAPI devices,
+ and will allow you to use a SCSI device driver instead of a native
+ ATAPI driver.
+
+ This is useful if you have an ATAPI device for which no native
+ driver has been written (for example, an ATAPI PD-CD drive);
+ you can then use this emulation together with an appropriate SCSI
+ device driver. In order to do this, say Y here and to "SCSI support"
+ and "SCSI generic support", below. You must then provide the kernel
+ command line "hdx=ide-scsi" (try "man bootparam" or see the
+ documentation of your boot loader (lilo or loadlin) about how to
+ pass options to the kernel at boot time) for devices if you want the
+ native EIDE sub-drivers to skip over the native support, so that
+ this SCSI emulation can be used instead.
+
+ Note that this option does NOT allow you to attach SCSI devices to a
+ box that doesn't have a SCSI host adapter installed.
+
+ If both this SCSI emulation and native ATAPI support are compiled
+ into the kernel, the native support will be used.
+
+config IDE_TASK_IOCTL
+ bool "IDE Taskfile Access"
+ help
+ This is a direct raw access to the media. It is a complex but
+ elegant solution to test and validate the domain of the hardware and
+ perform below the driver data recover if needed. This is the most
+ basic form of media-forensics.
+
+ If you are unsure, say N here.
+
+comment "IDE chipset support/bugfixes"
+
+config IDE_GENERIC
+ tristate "generic/default IDE chipset support"
+ default y
+ help
+ If unsure, say Y.
+
+config BLK_DEV_CMD640
+ bool "CMD640 chipset bugfix/support"
+ depends on X86
+ ---help---
+ The CMD-Technologies CMD640 IDE chip is used on many common 486 and
+ Pentium motherboards, usually in combination with a "Neptune" or
+ "SiS" chipset. Unfortunately, it has a number of rather nasty
+ design flaws that can cause severe data corruption under many common
+ conditions. Say Y here to include code which tries to automatically
+ detect and correct the problems under Linux. This option also
+ enables access to the secondary IDE ports in some CMD640 based
+ systems.
+
+ This driver will work automatically in PCI based systems (most new
+ systems have PCI slots). But if your system uses VESA local bus
+ (VLB) instead of PCI, you must also supply a kernel boot parameter
+ to enable the CMD640 bugfix/support: "ide0=cmd640_vlb". (Try "man
+ bootparam" or see the documentation of your boot loader about how to
+ pass options to the kernel.)
+
+ The CMD640 chip is also used on add-in cards by Acculogic, and on
+ the "CSA-6400E PCI to IDE controller" that some people have. For
+ details, read <file:Documentation/ide.txt>.
+
+config BLK_DEV_CMD640_ENHANCED
+ bool "CMD640 enhanced support"
+ depends on BLK_DEV_CMD640
+ help
+ This option includes support for setting/autotuning PIO modes and
+ prefetch on CMD640 IDE interfaces. For details, read
+ <file:Documentation/ide.txt>. If you have a CMD640 IDE interface
+ and your BIOS does not already do this for you, then say Y here.
+ Otherwise say N.
+
+config BLK_DEV_IDEPNP
+ bool "PNP EIDE support"
+ depends on PNP
+ help
+ If you have a PnP (Plug and Play) compatible EIDE card and
+ would like the kernel to automatically detect and activate
+ it, say Y here.
+
+config BLK_DEV_IDEPCI
+ bool "PCI IDE chipset support" if PCI
+ default BLK_DEV_IDEDMA_PMAC if PPC_PMAC && BLK_DEV_IDEDMA_PMAC
+ help
+ Say Y here for PCI systems which use IDE drive(s).
+ This option helps the IDE driver to automatically detect and
+ configure all PCI-based IDE interfaces in your system.
+
+config IDEPCI_SHARE_IRQ
+ bool "Sharing PCI IDE interrupts support"
+ depends on PCI && BLK_DEV_IDEPCI
+ help
+ Some ATA/IDE chipsets have hardware support which allows for
+ sharing a single IRQ with other cards. To enable support for
+ this in the ATA/IDE driver, say Y here.
+
+ It is safe to say Y to this question, in most cases.
+ If unsure, say N.
+
+config BLK_DEV_OFFBOARD
+ bool "Boot off-board chipsets first support"
+ depends on PCI && BLK_DEV_IDEPCI
+ help
+ Normally, IDE controllers built into the motherboard (on-board
+ controllers) are assigned to ide0 and ide1 while those on add-in PCI
+ cards (off-board controllers) are relegated to ide2 and ide3.
+ Answering Y here will allow you to reverse the situation, with
+ off-board controllers on ide0/1 and on-board controllers on ide2/3.
+ This can improve the usability of some boot managers such as lilo
+ when booting from a drive on an off-board controller.
+
+ If you say Y here, and you actually want to reverse the device scan
+ order as explained above, you also need to issue the kernel command
+ line option "ide=reverse". (Try "man bootparam" or see the
+ documentation of your boot loader (lilo or loadlin) about how to
+ pass options to the kernel at boot time.)
+
+ Note that, if you do this, the order of the hd* devices will be
+ rearranged which may require modification of fstab and other files.
+
+ If in doubt, say N.
+
+config BLK_DEV_GENERIC
+ tristate "Generic PCI IDE Chipset Support"
+ depends on BLK_DEV_IDEPCI
+
+config BLK_DEV_OPTI621
+ tristate "OPTi 82C621 chipset enhanced support (EXPERIMENTAL)"
+ depends on PCI && BLK_DEV_IDEPCI && EXPERIMENTAL
+ help
+ This is a driver for the OPTi 82C621 EIDE controller.
+ Please read the comments at the top of <file:drivers/ide/pci/opti621.c>.
+
+config BLK_DEV_RZ1000
+ tristate "RZ1000 chipset bugfix/support"
+ depends on PCI && BLK_DEV_IDEPCI && X86
+ help
+ The PC-Technologies RZ1000 IDE chip is used on many common 486 and
+ Pentium motherboards, usually along with the "Neptune" chipset.
+ Unfortunately, it has a rather nasty design flaw that can cause
+ severe data corruption under many conditions. Say Y here to include
+ code which automatically detects and corrects the problem under
+ Linux. This may slow disk throughput by a few percent, but at least
+ things will operate 100% reliably.
+
+config BLK_DEV_SL82C105
+ tristate "Winbond SL82c105 support"
+ depends on PCI && (PPC || ARM) && BLK_DEV_IDEPCI
+ help
+ If you have a Winbond SL82c105 IDE controller, say Y here to enable
+ special configuration for this chip. This is common on various CHRP
+ motherboards, but could be used elsewhere. If in doubt, say Y.
+
+config BLK_DEV_IDEDMA_PCI
+ bool "Generic PCI bus-master DMA support"
+ depends on PCI && BLK_DEV_IDEPCI
+ ---help---
+ If your PCI system uses IDE drive(s) (as opposed to SCSI, say) and
+ is capable of bus-master DMA operation (most Pentium PCI systems),
+ you will want to say Y here to reduce CPU overhead. You can then use
+ the "hdparm" utility to enable DMA for drives for which it was not
+ enabled automatically. By default, DMA is not enabled automatically
+ for these drives, but you can change that by saying Y to the
+ following question "Use DMA by default when available". You can get
+ the latest version of the hdparm utility from
+ <ftp://ibiblio.org/pub/Linux/system/hardware/>.
+
+ Read the comments at the beginning of <file:drivers/ide/ide-dma.c>
+ and the file <file:Documentation/ide.txt> for more information.
+
+ It is safe to say Y to this question.
+
+if BLK_DEV_IDEDMA_PCI
+
+config BLK_DEV_IDEDMA_FORCED
+ bool "Force enable legacy 2.0.X HOSTS to use DMA"
+ help
+ This is an old piece of lost code from Linux 2.0 Kernels.
+
+ Generally say N here.
+
+config IDEDMA_PCI_AUTO
+ bool "Use PCI DMA by default when available"
+ ---help---
+ Prior to kernel version 2.1.112, Linux used to automatically use
+ DMA for IDE drives and chipsets which support it. Due to concerns
+ about a couple of cases where buggy hardware may have caused damage,
+ the default is now to NOT use DMA automatically. To revert to the
+ previous behaviour, say Y to this question.
+
+ If you suspect your hardware is at all flakey, say N here.
+ Do NOT email the IDE kernel people regarding this issue!
+
+ It is normally safe to answer Y to this question unless your
+ motherboard uses a VIA VP2 chipset, in which case you should say N.
+
+config IDEDMA_ONLYDISK
+ bool "Enable DMA only for disks "
+ depends on IDEDMA_PCI_AUTO
+ help
+ This is used if you know your ATAPI Devices are going to fail DMA
+ Transfers.
+
+ Generally say N here.
+
+config BLK_DEV_AEC62XX
+ tristate "AEC62XX chipset support"
+ help
+ This driver adds explicit support for Acard AEC62xx (Artop ATP8xx)
+ IDE controllers. This allows the kernel to change PIO, DMA and UDMA
+ speeds and to configure the chip to optimum performance.
+
+config BLK_DEV_ALI15X3
+ tristate "ALI M15x3 chipset support"
+ help
+ This driver ensures (U)DMA support for ALI 1533, 1543 and 1543C
+ onboard chipsets. It also tests for Simplex mode and enables
+ normal dual channel support.
+
+ If you say Y here, you also need to say Y to "Use DMA by default
+ when available", above. Please read the comments at the top of
+ <file:drivers/ide/pci/alim15x3.c>.
+
+ If unsure, say N.
+
+config WDC_ALI15X3
+ bool "ALI M15x3 WDC support (DANGEROUS)"
+ depends on BLK_DEV_ALI15X3
+ ---help---
+ This allows for UltraDMA support for WDC drives that ignore CRC
+ checking. You are a fool for enabling this option, but there have
+ been requests. DO NOT COMPLAIN IF YOUR DRIVE HAS FS CORRUPTION, IF
+ YOU ENABLE THIS! No one will listen, just laugh for ignoring this
+ SERIOUS WARNING.
+
+ Using this option can allow WDC drives to run at ATA-4/5 transfer
+ rates with only an ATA-2 support structure.
+
+ SAY N!
+
+config BLK_DEV_AMD74XX
+ tristate "AMD and nVidia IDE support"
+ help
+ This driver adds explicit support for AMD-7xx and AMD-8111 chips
+ and also for the nVidia nForce chip. This allows the kernel to
+ change PIO, DMA and UDMA speeds and to configure the chip to
+ optimum performance.
+
+config BLK_DEV_ATIIXP
+ tristate "ATI IXP chipset IDE support"
+ depends on X86
+ help
+ This driver adds explicit support for ATI IXP chipset.
+ This allows the kernel to change PIO, DMA and UDMA speeds
+ and to configure the chip to optimum performance.
+
+ Say Y here if you have an ATI IXP chipset IDE controller.
+
+config BLK_DEV_CMD64X
+ tristate "CMD64{3|6|8|9} chipset support"
+ help
+ Say Y here if you have an IDE controller which uses any of these
+ chipsets: CMD643, CMD646, or CMD648.
+
+config BLK_DEV_TRIFLEX
+ tristate "Compaq Triflex IDE support"
+ help
+ Say Y here if you have a Compaq Triflex IDE controller, such
+ as those commonly found on Compaq Pentium-Pro systems
+
+config BLK_DEV_CY82C693
+ tristate "CY82C693 chipset support"
+ help
+ This driver adds detection and support for the CY82C693 chipset
+ used on Digital's PC-Alpha 164SX boards.
+
+ If you say Y here, you need to say Y to "Use DMA by default
+ when available" as well.
+
+config BLK_DEV_CS5520
+ tristate "Cyrix CS5510/20 MediaGX chipset support (VERY EXPERIMENTAL)"
+ depends on EXPERIMENTAL
+ help
+ Include support for PIO tuning an virtual DMA on the Cyrix MediaGX
+ 5510/5520 chipset. This will automatically be detected and
+ configured if found.
+
+ It is safe to say Y to this question.
+
+config BLK_DEV_CS5530
+ tristate "Cyrix/National Semiconductor CS5530 MediaGX chipset support"
+ help
+ Include support for UDMA on the Cyrix MediaGX 5530 chipset. This
+ will automatically be detected and configured if found.
+
+ It is safe to say Y to this question.
+
+config BLK_DEV_HPT34X
+ tristate "HPT34X chipset support"
+ help
+ This driver adds up to 4 more EIDE devices sharing a single
+ interrupt. The HPT343 chipset in its current form is a non-bootable
+ controller; the HPT345/HPT363 chipset is a bootable (needs BIOS FIX)
+ PCI UDMA controllers. This driver requires dynamic tuning of the
+ chipset during the ide-probe at boot time. It is reported to support
+ DVD II drives, by the manufacturer.
+
+config HPT34X_AUTODMA
+ bool "HPT34X AUTODMA support (EXPERIMENTAL)"
+ depends on BLK_DEV_HPT34X && EXPERIMENTAL
+ help
+ This is a dangerous thing to attempt currently! Please read the
+ comments at the top of <file:drivers/ide/pci/hpt34x.c>. If you say Y
+ here, then say Y to "Use DMA by default when available" as well.
+
+ If unsure, say N.
+
+config BLK_DEV_HPT366
+ tristate "HPT36X/37X chipset support"
+ ---help---
+ HPT366 is an Ultra DMA chipset for ATA-66.
+ HPT368 is an Ultra DMA chipset for ATA-66 RAID Based.
+ HPT370 is an Ultra DMA chipset for ATA-100.
+ HPT372 is an Ultra DMA chipset for ATA-100.
+ HPT374 is an Ultra DMA chipset for ATA-100.
+
+ This driver adds up to 4 more EIDE devices sharing a single
+ interrupt.
+
+ The HPT366 chipset in its current form is bootable. One solution
+ for this problem are special LILO commands for redirecting the
+ reference to device 0x80. The other solution is to say Y to "Boot
+ off-board chipsets first support" (CONFIG_BLK_DEV_OFFBOARD) unless
+ your mother board has the chipset natively mounted. Regardless one
+ should use the fore mentioned option and call at LILO or include
+ "ide=reverse" in LILO's append-line.
+
+ This driver requires dynamic tuning of the chipset during the
+ ide-probe at boot. It is reported to support DVD II drives, by the
+ manufacturer.
+
+config BLK_DEV_SC1200
+ tristate "National SCx200 chipset support"
+ help
+ This driver adds support for the built in IDE on the National
+ SCx200 series of embedded x86 "Geode" systems
+
+config BLK_DEV_PIIX
+ tristate "Intel PIIXn chipsets support"
+ help
+ This driver adds explicit support for Intel PIIX and ICH chips
+ and also for the Efar Victory66 (slc90e66) chip. This allows
+ the kernel to change PIO, DMA and UDMA speeds and to configure
+ the chip to optimum performance.
+
+config BLK_DEV_IT8172
+ bool "IT8172 IDE support"
+ depends on (MIPS_ITE8172 || MIPS_IVR)
+ help
+ Say Y here to support the on-board IDE controller on the Integrated
+ Technology Express, Inc. ITE8172 SBC. Vendor page at
+ <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
+ board at <http://www.mvista.com/partners/semiconductor/ite.html>.
+
+config BLK_DEV_NS87415
+ tristate "NS87415 chipset support"
+ help
+ This driver adds detection and support for the NS87415 chip
+ (used in SPARC64, among others).
+
+ Please read the comments at the top of <file:drivers/ide/pci/ns87415.c>.
+
+config BLK_DEV_PDC202XX_OLD
+ tristate "PROMISE PDC202{46|62|65|67} support"
+ help
+ Promise Ultra33 or PDC20246
+ Promise Ultra66 or PDC20262
+ Promise Ultra100 or PDC20265/PDC20267/PDC20268
+
+ This driver adds up to 4 more EIDE devices sharing a single
+ interrupt. This add-on card is a bootable PCI UDMA controller. Since
+ multiple cards can be installed and there are BIOS ROM problems that
+ happen if the BIOS revisions of all installed cards (three-max) do
+ not match, the driver attempts to do dynamic tuning of the chipset
+ at boot-time for max-speed. Ultra33 BIOS 1.25 or newer is required
+ for more than one card. This card may require that you say Y to
+ "Special UDMA Feature".
+
+ If you say Y here, you need to say Y to "Use DMA by default when
+ available" as well.
+
+ Please read the comments at the top of
+ <file:drivers/ide/pci/pdc202xx_old.c>.
+
+ If unsure, say N.
+
+config PDC202XX_BURST
+ bool "Special UDMA Feature"
+ depends on BLK_DEV_PDC202XX_OLD
+ help
+ This option causes the pdc202xx driver to enable UDMA modes on the
+ PDC202xx even when the PDC202xx BIOS has not done so.
+
+ It was originally designed for the PDC20246/Ultra33, whose BIOS will
+ only setup UDMA on the first two PDC20246 cards. It has also been
+ used succesfully on a PDC20265/Ultra100, allowing use of UDMA modes
+ when the PDC20265 BIOS has been disabled (for faster boot up).
+
+ Please read the comments at the top of
+ <file:drivers/ide/pci/pdc202xx_old.c>.
+
+ If unsure, say N.
+
+config BLK_DEV_PDC202XX_NEW
+ tristate "PROMISE PDC202{68|69|70|71|75|76|77} support"
+
+# FIXME - probably wants to be one for old and for new
+config PDC202XX_FORCE
+ bool "Enable controller even if disabled by BIOS"
+ depends on BLK_DEV_PDC202XX_NEW
+ help
+ Enable the PDC202xx controller even if it has been disabled in the BIOS setup.
+
+config BLK_DEV_SVWKS
+ tristate "ServerWorks OSB4/CSB5/CSB6 chipsets support"
+ help
+ This driver adds PIO/(U)DMA support for the ServerWorks OSB4/CSB5
+ chipsets.
+
+config BLK_DEV_SGIIOC4
+ tristate "Silicon Graphics IOC4 chipset support"
+ depends on IA64_SGI_SN2 || IA64_GENERIC
+ help
+ This driver adds PIO & MultiMode DMA-2 support for the SGI IOC4
+ chipset, which has one channel and can support two devices.
+ Please say Y here if you have an Altix System from SGI.
+
+config BLK_DEV_SIIMAGE
+ tristate "Silicon Image chipset support"
+ help
+ This driver adds PIO/(U)DMA support for the SI CMD680 and SII
+ 3112 (Serial ATA) chips.
+
+config BLK_DEV_SIS5513
+ tristate "SiS5513 chipset support"
+ depends on X86
+ ---help---
+ This driver ensures (U)DMA support for SIS5513 chipset family based
+ mainboards.
+
+ The following chipsets are supported:
+ ATA16: SiS5511, SiS5513
+ ATA33: SiS5591, SiS5597, SiS5598, SiS5600
+ ATA66: SiS530, SiS540, SiS620, SiS630, SiS640
+ ATA100: SiS635, SiS645, SiS650, SiS730, SiS735, SiS740,
+ SiS745, SiS750
+
+ If you say Y here, you need to say Y to "Use DMA by default when
+ available" as well.
+
+ Please read the comments at the top of <file:drivers/ide/pci/sis5513.c>.
+
+config BLK_DEV_SLC90E66
+ tristate "SLC90E66 chipset support"
+ help
+ This driver ensures (U)DMA support for Victroy66 SouthBridges for
+ SMsC with Intel NorthBridges. This is an Ultra66 based chipset.
+ The nice thing about it is that you can mix Ultra/DMA/PIO devices
+ and it will handle timing cycles. Since this is an improved
+ look-a-like to the PIIX4 it should be a nice addition.
+
+ If you say Y here, you need to say Y to "Use DMA by default when
+ available" as well.
+
+ Please read the comments at the top of
+ <file:drivers/ide/pci/slc90e66.c>.
+
+config BLK_DEV_TRM290
+ tristate "Tekram TRM290 chipset support"
+ help
+ This driver adds support for bus master DMA transfers
+ using the Tekram TRM290 PCI IDE chip. Volunteers are
+ needed for further tweaking and development.
+ Please read the comments at the top of <file:drivers/ide/pci/trm290.c>.
+
+config BLK_DEV_VIA82CXXX
+ tristate "VIA82CXXX chipset support"
+ help
+ This driver adds explicit support for VIA BusMastering IDE chips.
+ This allows the kernel to change PIO, DMA and UDMA speeds and to
+ configure the chip to optimum performance.
+
+endif
+
+config BLK_DEV_IDE_PMAC
+ bool "Builtin PowerMac IDE support"
+ depends on PPC_PMAC && IDE=y
+ help
+ This driver provides support for the built-in IDE controller on
+ most of the recent Apple Power Macintoshes and PowerBooks.
+ If unsure, say Y.
+
+config BLK_DEV_IDE_PMAC_ATA100FIRST
+ bool "Probe internal ATA/100 (Kauai) first"
+ depends on BLK_DEV_IDE_PMAC
+ help
+ This option will cause the ATA/100 controller found in UniNorth2
+ based machines (Windtunnel PowerMac, Aluminium PowerBooks, ...)
+ to be probed before the ATA/66 and ATA/33 controllers. Without
+ these, those machine used to have the hard disk on hdc and the
+ CD-ROM on hda. This option changes this to more natural hda for
+ hard disk and hdc for CD-ROM.
+
+config BLK_DEV_IDEDMA_PMAC
+ bool "PowerMac IDE DMA support"
+ depends on BLK_DEV_IDE_PMAC
+ help
+ This option allows the driver for the built-in IDE controller on
+ Power Macintoshes and PowerBooks to use DMA (direct memory access)
+ to transfer data to and from memory. Saying Y is safe and improves
+ performance.
+
+config BLK_DEV_IDE_PMAC_BLINK
+ bool "Blink laptop LED on drive activity"
+ depends on BLK_DEV_IDE_PMAC && ADB_PMU
+ help
+ This option enables the use of the sleep LED as a hard drive
+ activity LED.
+
+config IDE_ARM
+ def_bool ARM && (ARCH_A5K || ARCH_CLPS7500 || ARCH_RPC || ARCH_SHARK)
+
+config BLK_DEV_IDE_ICSIDE
+ tristate "ICS IDE interface support"
+ depends on ARM && ARCH_ACORN
+ help
+ On Acorn systems, say Y here if you wish to use the ICS IDE
+ interface card. This is not required for ICS partition support.
+ If you are unsure, say N to this.
+
+config BLK_DEV_IDEDMA_ICS
+ bool "ICS DMA support"
+ depends on BLK_DEV_IDE_ICSIDE
+ help
+ Say Y here if you want to add DMA (Direct Memory Access) support to
+ the ICS IDE driver.
+
+config IDEDMA_ICS_AUTO
+ bool "Use ICS DMA by default"
+ depends on BLK_DEV_IDEDMA_ICS
+ help
+ Prior to kernel version 2.1.112, Linux used to automatically use
+ DMA for IDE drives and chipsets which support it. Due to concerns
+ about a couple of cases where buggy hardware may have caused damage,
+ the default is now to NOT use DMA automatically. To revert to the
+ previous behaviour, say Y to this question.
+
+ If you suspect your hardware is at all flakey, say N here.
+ Do NOT email the IDE kernel people regarding this issue!
+
+config BLK_DEV_IDE_RAPIDE
+ tristate "RapIDE interface support"
+ depends on ARM && ARCH_ACORN
+ help
+ Say Y here if you want to support the Yellowstone RapIDE controller
+ manufactured for use with Acorn computers.
+
+config BLK_DEV_IDE_BAST
+ tristate "Simtec BAST / Thorcom VR1000 IDE support"
+ depends on ARM && (ARCH_BAST || MACH_VR1000)
+ help
+ Say Y here if you want to support the onboard IDE channels on the
+ Simtec BAST or the Thorcom VR1000
+
+config BLK_DEV_GAYLE
+ bool "Amiga Gayle IDE interface support"
+ depends on AMIGA
+ help
+ This is the IDE driver for the Amiga Gayle IDE interface. It supports
+ both the `A1200 style' and `A4000 style' of the Gayle IDE interface,
+ This includes builtin IDE interfaces on some Amiga models (A600,
+ A1200, A4000, and A4000T), and IDE interfaces on the Zorro expansion
+ bus (M-Tech E-Matrix 530 expansion card).
+ Say Y if you have an Amiga with a Gayle IDE interface and want to use
+ IDE devices (hard disks, CD-ROM drives, etc.) that are connected to
+ it.
+ Note that you also have to enable Zorro bus support if you want to
+ use Gayle IDE interfaces on the Zorro expansion bus.
+
+config BLK_DEV_IDEDOUBLER
+ bool "Amiga IDE Doubler support (EXPERIMENTAL)"
+ depends on BLK_DEV_GAYLE && EXPERIMENTAL
+ ---help---
+ This driver provides support for the so-called `IDE doublers' (made
+ by various manufacturers, e.g. Eyetech) that can be connected to the
+ builtin IDE interface of some Amiga models. Using such an IDE
+ doubler, you can connect up to four instead of two IDE devices on
+ the Amiga's builtin IDE interface.
+
+ Note that the normal Amiga Gayle IDE driver may not work correctly
+ if you have an IDE doubler and don't enable this driver!
+
+ Say Y if you have an IDE doubler. The driver is enabled at kernel
+ runtime using the "ide=doubler" kernel boot parameter.
+
+config BLK_DEV_BUDDHA
+ bool "Buddha/Catweasel/X-Surf IDE interface support (EXPERIMENTAL)"
+ depends on ZORRO && EXPERIMENTAL
+ help
+ This is the IDE driver for the IDE interfaces on the Buddha,
+ Catweasel and X-Surf expansion boards. It supports up to two interfaces
+ on the Buddha, three on the Catweasel and two on the X-Surf.
+
+ Say Y if you have a Buddha or Catweasel expansion board and want to
+ use IDE devices (hard disks, CD-ROM drives, etc.) that are connected
+ to one of its IDE interfaces.
+
+config BLK_DEV_FALCON_IDE
+ bool "Falcon IDE interface support"
+ depends on ATARI
+ help
+ This is the IDE driver for the builtin IDE interface on the Atari
+ Falcon. Say Y if you have a Falcon and want to use IDE devices (hard
+ disks, CD-ROM drives, etc.) that are connected to the builtin IDE
+ interface.
+
+config BLK_DEV_MAC_IDE
+ bool "Macintosh Quadra/Powerbook IDE interface support"
+ depends on MAC
+ help
+ This is the IDE driver for the builtin IDE interface on some m68k
+ Macintosh models. It supports both the `Quadra style' (used in
+ Quadra/ Centris 630 and Performa 588 models) and `Powerbook style'
+ (used in the Powerbook 150 and 190 models) IDE interface.
+
+ Say Y if you have such an Macintosh model and want to use IDE
+ devices (hard disks, CD-ROM drives, etc.) that are connected to the
+ builtin IDE interface.
+
+config BLK_DEV_Q40IDE
+ bool "Q40/Q60 IDE interface support"
+ depends on Q40
+ help
+ Enable the on-board IDE controller in the Q40/Q60. This should
+ normally be on; disable it only if you are running a custom hard
+ drive subsystem through an expansion card.
+
+config BLK_DEV_MPC8xx_IDE
+ bool "MPC8xx IDE support"
+ depends on 8xx
+ help
+ This option provides support for IDE on Motorola MPC8xx Systems.
+ Please see 'Type of MPC8xx IDE interface' for details.
+
+ If unsure, say N.
+
+choice
+ prompt "Type of MPC8xx IDE interface"
+ depends on BLK_DEV_MPC8xx_IDE
+ default IDE_8xx_PCCARD
+
+config IDE_8xx_PCCARD
+ bool "8xx_PCCARD"
+ ---help---
+ Select how the IDE devices are connected to the MPC8xx system:
+
+ 8xx_PCCARD uses the 8xx internal PCMCIA interface in combination
+ with a PC Card (e.g. ARGOSY portable Hard Disk Adapter),
+ ATA PC Card HDDs or ATA PC Flash Cards (example: TQM8xxL
+ systems)
+
+ 8xx_DIRECT is used for directly connected IDE devices using the 8xx
+ internal PCMCIA interface (example: IVMS8 systems)
+
+ EXT_DIRECT is used for IDE devices directly connected to the 8xx
+ bus using some glue logic, but _not_ the 8xx internal
+ PCMCIA interface (example: IDIF860 systems)
+
+config IDE_8xx_DIRECT
+ bool "8xx_DIRECT"
+
+config IDE_EXT_DIRECT
+ bool "EXT_DIRECT"
+
+endchoice
+
+# no isa -> no vlb
+config IDE_CHIPSETS
+ bool "Other IDE chipset support"
+ depends on ISA
+ ---help---
+ Say Y here if you want to include enhanced support for various IDE
+ interface chipsets used on motherboards and add-on cards. You can
+ then pick your particular IDE chip from among the following options.
+ This enhanced support may be necessary for Linux to be able to
+ access the 3rd/4th drives in some systems. It may also enable
+ setting of higher speed I/O rates to improve system performance with
+ these chipsets. Most of these also require special kernel boot
+ parameters to actually turn on the support at runtime; you can find
+ a list of these in the file <file:Documentation/ide.txt>.
+
+ People with SCSI-only systems can say N here.
+
+if IDE_CHIPSETS
+
+comment "Note: most of these also require special kernel boot parameters"
+
+config BLK_DEV_4DRIVES
+ bool "Generic 4 drives/port support"
+ help
+ Certain older chipsets, including the Tekram 690CD, use a single set
+ of I/O ports at 0x1f0 to control up to four drives, instead of the
+ customary two drives per port. Support for this can be enabled at
+ runtime using the "ide0=four" kernel boot parameter if you say Y
+ here.
+
+config BLK_DEV_ALI14XX
+ tristate "ALI M14xx support"
+ help
+ This driver is enabled at runtime using the "ide0=ali14xx" kernel
+ boot parameter. It enables support for the secondary IDE interface
+ of the ALI M1439/1443/1445/1487/1489 chipsets, and permits faster
+ I/O speeds to be set as well. See the files
+ <file:Documentation/ide.txt> and <file:drivers/ide/legacy/ali14xx.c> for
+ more info.
+
+config BLK_DEV_DTC2278
+ tristate "DTC-2278 support"
+ help
+ This driver is enabled at runtime using the "ide0=dtc2278" kernel
+ boot parameter. It enables support for the secondary IDE interface
+ of the DTC-2278 card, and permits faster I/O speeds to be set as
+ well. See the <file:Documentation/ide.txt> and
+ <file:drivers/ide/legacy/dtc2278.c> files for more info.
+
+config BLK_DEV_HT6560B
+ tristate "Holtek HT6560B support"
+ help
+ This driver is enabled at runtime using the "ide0=ht6560b" kernel
+ boot parameter. It enables support for the secondary IDE interface
+ of the Holtek card, and permits faster I/O speeds to be set as well.
+ See the <file:Documentation/ide.txt> and
+ <file:drivers/ide/legacy/ht6560b.c> files for more info.
+
+config BLK_DEV_QD65XX
+ tristate "QDI QD65xx support"
+ help
+ This driver is enabled at runtime using the "ide0=qd65xx" kernel
+ boot parameter. It permits faster I/O speeds to be set. See the
+ <file:Documentation/ide.txt> and <file:drivers/ide/legacy/qd65xx.c> for
+ more info.
+
+config BLK_DEV_UMC8672
+ tristate "UMC-8672 support"
+ help
+ This driver is enabled at runtime using the "ide0=umc8672" kernel
+ boot parameter. It enables support for the secondary IDE interface
+ of the UMC-8672, and permits faster I/O speeds to be set as well.
+ See the files <file:Documentation/ide.txt> and
+ <file:drivers/ide/legacy/umc8672.c> for more info.
+
+endif
+
+config BLK_DEV_IDEDMA
+ def_bool BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS
+
+config IDEDMA_IVB
+ bool "IGNORE word93 Validation BITS"
+ depends on BLK_DEV_IDEDMA_PCI || BLK_DEV_IDEDMA_PMAC || BLK_DEV_IDEDMA_ICS
+ ---help---
+ There are unclear terms in ATA-4 and ATA-5 standards how certain
+ hardware (an 80c ribbon) should be detected. Different interpretations
+ of the standards have been released in hardware. This causes problems:
+ for example, a host with Ultra Mode 4 (or higher) will not run
+ in that mode with an 80c ribbon.
+
+ If you are experiencing compatibility or performance problems, you
+ MAY try to answering Y here. However, it does not necessarily solve
+ any of your problems, it could even cause more of them.
+
+ It is normally safe to answer Y; however, the default is N.
+
+config IDEDMA_AUTO
+ def_bool IDEDMA_PCI_AUTO || IDEDMA_ICS_AUTO
+
+endif
+
+config BLK_DEV_HD_ONLY
+ bool "Old hard disk (MFM/RLL/IDE) driver"
+ depends on BLK_DEV_IDE=n
+ help
+ There are two drivers for MFM/RLL/IDE hard disks. Most people use
+ the newer enhanced driver, but this old one is still around for two
+ reasons. Some older systems have strange timing problems and seem to
+ work only with the old driver (which itself does not work with some
+ newer systems). The other reason is that the old driver is smaller,
+ since it lacks the enhanced functionality of the new one. This makes
+ it a good choice for systems with very tight memory restrictions, or
+ for systems with only older MFM/RLL/ESDI drives. Choosing the old
+ driver can save 13 KB or so of kernel memory.
+
+ If you are unsure, then just choose the Enhanced IDE/MFM/RLL driver
+ instead of this one. For more detailed information, read the
+ Disk-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+config BLK_DEV_HD
+ def_bool BLK_DEV_HD_IDE || BLK_DEV_HD_ONLY
+
+endif
+
+endmenu