ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 424 deletions

diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c
deleted file mode 100644
index 122ed3c072fd..000000000000
--- a/drivers/ide/arm/palm_bk3710.c
+++ /dev/null
@@ -1,424 +0,0 @@
-/*
- * Palmchip bk3710 IDE controller
- *
- * Copyright (C) 2006 Texas Instruments.
- * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com>
- *
- * ----------------------------------------------------------------------------
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- *  You should have received a copy of the GNU General Public License
- *  along with this program; if not, write to the Free Software
- *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
- * ----------------------------------------------------------------------------
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/ide.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/clk.h>
-#include <linux/platform_device.h>
-
-/* Offset of the primary interface registers */
-#define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0
-
-/* Primary Control Offset */
-#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6
-
-/*
- * PalmChip 3710 IDE Controller UDMA timing structure Definition
- */
-struct palm_bk3710_udmatiming {
-	unsigned int rptime;	/* Ready to pause time  */
-	unsigned int cycletime;	/* Cycle Time           */
-};
-
-#define BK3710_BMICP		0x00
-#define BK3710_BMISP		0x02
-#define BK3710_BMIDTP		0x04
-#define BK3710_BMICS		0x08
-#define BK3710_BMISS		0x0A
-#define BK3710_BMIDTS		0x0C
-#define BK3710_IDETIMP		0x40
-#define BK3710_IDETIMS		0x42
-#define BK3710_SIDETIM		0x44
-#define BK3710_SLEWCTL		0x45
-#define BK3710_IDESTATUS	0x47
-#define BK3710_UDMACTL		0x48
-#define BK3710_UDMATIM		0x4A
-#define BK3710_MISCCTL		0x50
-#define BK3710_REGSTB		0x54
-#define BK3710_REGRCVR		0x58
-#define BK3710_DATSTB		0x5C
-#define BK3710_DATRCVR		0x60
-#define BK3710_DMASTB		0x64
-#define BK3710_DMARCVR		0x68
-#define BK3710_UDMASTB		0x6C
-#define BK3710_UDMATRP		0x70
-#define BK3710_UDMAENV		0x74
-#define BK3710_IORDYTMP		0x78
-#define BK3710_IORDYTMS		0x7C
-
-static unsigned ideclk_period; /* in nanoseconds */
-
-static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = {
-	{160, 240},		/* UDMA Mode 0 */
-	{125, 160},		/* UDMA Mode 1 */
-	{100, 120},		/* UDMA Mode 2 */
-	{100, 90},		/* UDMA Mode 3 */
-	{100, 60},		/* UDMA Mode 4 */
-	{85,  40},		/* UDMA Mode 5 */
-};
-
-static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev,
-				    unsigned int mode)
-{
-	u8 tenv, trp, t0;
-	u32 val32;
-	u16 val16;
-
-	/* DMA Data Setup */
-	t0 = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].cycletime,
-			  ideclk_period) - 1;
-	tenv = DIV_ROUND_UP(20, ideclk_period) - 1;
-	trp = DIV_ROUND_UP(palm_bk3710_udmatimings[mode].rptime,
-			   ideclk_period) - 1;
-
-	/* udmatim Register */
-	val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0);
-	val16 |= (mode << (dev ? 4 : 0));
-	writew(val16, base + BK3710_UDMATIM);
-
-	/* udmastb Ultra DMA Access Strobe Width */
-	val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8));
-	val32 |= (t0 << (dev ? 8 : 0));
-	writel(val32, base + BK3710_UDMASTB);
-
-	/* udmatrp Ultra DMA Ready to Pause Time */
-	val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8));
-	val32 |= (trp << (dev ? 8 : 0));
-	writel(val32, base + BK3710_UDMATRP);
-
-	/* udmaenv Ultra DMA envelop Time */
-	val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8));
-	val32 |= (tenv << (dev ? 8 : 0));
-	writel(val32, base + BK3710_UDMAENV);
-
-	/* Enable UDMA for Device */
-	val16 = readw(base + BK3710_UDMACTL) | (1 << dev);
-	writew(val16, base + BK3710_UDMACTL);
-}
-
-static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev,
-				   unsigned short min_cycle,
-				   unsigned int mode)
-{
-	u8 td, tkw, t0;
-	u32 val32;
-	u16 val16;
-	struct ide_timing *t;
-	int cycletime;
-
-	t = ide_timing_find_mode(mode);
-	cycletime = max_t(int, t->cycle, min_cycle);
-
-	/* DMA Data Setup */
-	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
-	td = DIV_ROUND_UP(t->active, ideclk_period);
-	tkw = t0 - td - 1;
-	td -= 1;
-
-	val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8));
-	val32 |= (td << (dev ? 8 : 0));
-	writel(val32, base + BK3710_DMASTB);
-
-	val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8));
-	val32 |= (tkw << (dev ? 8 : 0));
-	writel(val32, base + BK3710_DMARCVR);
-
-	/* Disable UDMA for Device */
-	val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev);
-	writew(val16, base + BK3710_UDMACTL);
-}
-
-static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate,
-				   unsigned int dev, unsigned int cycletime,
-				   unsigned int mode)
-{
-	u8 t2, t2i, t0;
-	u32 val32;
-	struct ide_timing *t;
-
-	/* PIO Data Setup */
-	t0 = DIV_ROUND_UP(cycletime, ideclk_period);
-	t2 = DIV_ROUND_UP(ide_timing_find_mode(XFER_PIO_0 + mode)->active,
-			  ideclk_period);
-
-	t2i = t0 - t2 - 1;
-	t2 -= 1;
-
-	val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8));
-	val32 |= (t2 << (dev ? 8 : 0));
-	writel(val32, base + BK3710_DATSTB);
-
-	val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8));
-	val32 |= (t2i << (dev ? 8 : 0));
-	writel(val32, base + BK3710_DATRCVR);
-
-	if (mate) {
-		u8 mode2 = ide_get_best_pio_mode(mate, 255, 4);
-
-		if (mode2 < mode)
-			mode = mode2;
-	}
-
-	/* TASKFILE Setup */
-	t = ide_timing_find_mode(XFER_PIO_0 + mode);
-	t0 = DIV_ROUND_UP(t->cyc8b, ideclk_period);
-	t2 = DIV_ROUND_UP(t->act8b, ideclk_period);
-
-	t2i = t0 - t2 - 1;
-	t2 -= 1;
-
-	val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8));
-	val32 |= (t2 << (dev ? 8 : 0));
-	writel(val32, base + BK3710_REGSTB);
-
-	val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8));
-	val32 |= (t2i << (dev ? 8 : 0));
-	writel(val32, base + BK3710_REGRCVR);
-}
-
-static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed)
-{
-	int is_slave = drive->dn & 1;
-	void __iomem *base = (void *)drive->hwif->dma_base;
-
-	if (xferspeed >= XFER_UDMA_0) {
-		palm_bk3710_setudmamode(base, is_slave,
-					xferspeed - XFER_UDMA_0);
-	} else {
-		palm_bk3710_setdmamode(base, is_slave,
-				       drive->id[ATA_ID_EIDE_DMA_MIN],
-				       xferspeed);
-	}
-}
-
-static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio)
-{
-	unsigned int cycle_time;
-	int is_slave = drive->dn & 1;
-	ide_drive_t *mate;
-	void __iomem *base = (void *)drive->hwif->dma_base;
-
-	/*
-	 * Obtain the drive PIO data for tuning the Palm Chip registers
-	 */
-	cycle_time = ide_pio_cycle_time(drive, pio);
-	mate = ide_get_pair_dev(drive);
-	palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio);
-}
-
-static void __devinit palm_bk3710_chipinit(void __iomem *base)
-{
-	/*
-	 * enable the reset_en of ATA controller so that when ata signals
-	 * are brought out, by writing into device config. at that
-	 * time por_n signal should not be 'Z' and have a stable value.
-	 */
-	writel(0x0300, base + BK3710_MISCCTL);
-
-	/* wait for some time and deassert the reset of ATA Device. */
-	mdelay(100);
-
-	/* Deassert the Reset */
-	writel(0x0200, base + BK3710_MISCCTL);
-
-	/*
-	 * Program the IDETIMP Register Value based on the following assumptions
-	 *
-	 * (ATA_IDETIMP_IDEEN		, ENABLE ) |
-	 * (ATA_IDETIMP_SLVTIMEN	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSMPL		, 70NS)    |
-	 * (ATA_IDETIMP_RDYRCVRY	, 50NS)    |
-	 * (ATA_IDETIMP_DMAFTIM1	, PIOCOMP) |
-	 * (ATA_IDETIMP_PREPOST1	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSEN1		, DISABLE) |
-	 * (ATA_IDETIMP_PIOFTIM1	, DISABLE) |
-	 * (ATA_IDETIMP_DMAFTIM0	, PIOCOMP) |
-	 * (ATA_IDETIMP_PREPOST0	, DISABLE) |
-	 * (ATA_IDETIMP_RDYSEN0		, DISABLE) |
-	 * (ATA_IDETIMP_PIOFTIM0	, DISABLE)
-	 */
-	writew(0xB388, base + BK3710_IDETIMP);
-
-	/*
-	 * Configure  SIDETIM  Register
-	 * (ATA_SIDETIM_RDYSMPS1	,120NS ) |
-	 * (ATA_SIDETIM_RDYRCYS1	,120NS )
-	 */
-	writeb(0, base + BK3710_SIDETIM);
-
-	/*
-	 * UDMACTL Ultra-ATA DMA Control
-	 * (ATA_UDMACTL_UDMAP1	, 0 ) |
-	 * (ATA_UDMACTL_UDMAP0	, 0 )
-	 *
-	 */
-	writew(0, base + BK3710_UDMACTL);
-
-	/*
-	 * MISCCTL Miscellaneous Conrol Register
-	 * (ATA_MISCCTL_RSTMODEP	, 1) |
-	 * (ATA_MISCCTL_RESETP		, 0) |
-	 * (ATA_MISCCTL_TIMORIDE	, 1)
-	 */
-	writel(0x201, base + BK3710_MISCCTL);
-
-	/*
-	 * IORDYTMP IORDY Timer for Primary Register
-	 * (ATA_IORDYTMP_IORDYTMP     , 0xffff  )
-	 */
-	writel(0xFFFF, base + BK3710_IORDYTMP);
-
-	/*
-	 * Configure BMISP Register
-	 * (ATA_BMISP_DMAEN1	, DISABLE )	|
-	 * (ATA_BMISP_DMAEN0	, DISABLE )	|
-	 * (ATA_BMISP_IORDYINT	, CLEAR)	|
-	 * (ATA_BMISP_INTRSTAT	, CLEAR)	|
-	 * (ATA_BMISP_DMAERROR	, CLEAR)
-	 */
-	writew(0, base + BK3710_BMISP);
-
-	palm_bk3710_setpiomode(base, NULL, 0, 600, 0);
-	palm_bk3710_setpiomode(base, NULL, 1, 600, 0);
-}
-
-static u8 palm_bk3710_cable_detect(ide_hwif_t *hwif)
-{
-	return ATA_CBL_PATA80;
-}
-
-static int __devinit palm_bk3710_init_dma(ide_hwif_t *hwif,
-					  const struct ide_port_info *d)
-{
-	printk(KERN_INFO "    %s: MMIO-DMA\n", hwif->name);
-
-	if (ide_allocate_dma_engine(hwif))
-		return -1;
-
-	hwif->dma_base = hwif->io_ports.data_addr - IDE_PALM_ATA_PRI_REG_OFFSET;
-
-	hwif->dma_ops = &sff_dma_ops;
-
-	return 0;
-}
-
-static const struct ide_port_ops palm_bk3710_ports_ops = {
-	.set_pio_mode		= palm_bk3710_set_pio_mode,
-	.set_dma_mode		= palm_bk3710_set_dma_mode,
-	.cable_detect		= palm_bk3710_cable_detect,
-};
-
-static struct ide_port_info __devinitdata palm_bk3710_port_info = {
-	.init_dma		= palm_bk3710_init_dma,
-	.port_ops		= &palm_bk3710_ports_ops,
-	.host_flags		= IDE_HFLAG_MMIO,
-	.pio_mask		= ATA_PIO4,
-	.mwdma_mask		= ATA_MWDMA2,
-};
-
-static int __init palm_bk3710_probe(struct platform_device *pdev)
-{
-	struct clk *clk;
-	struct resource *mem, *irq;
-	unsigned long base, rate;
-	int i, rc;
-	hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
-	clk = clk_get(&pdev->dev, "IDECLK");
-	if (IS_ERR(clk))
-		return -ENODEV;
-
-	clk_enable(clk);
-	rate = clk_get_rate(clk);
-	ideclk_period = 1000000000UL / rate;
-
-	/* Register the IDE interface with Linux ATA Interface */
-	memset(&hw, 0, sizeof(hw));
-
-	mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	if (mem == NULL) {
-		printk(KERN_ERR "failed to get memory region resource\n");
-		return -ENODEV;
-	}
-
-	irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
-	if (irq == NULL) {
-		printk(KERN_ERR "failed to get IRQ resource\n");
-		return -ENODEV;
-	}
-
-	if (request_mem_region(mem->start, mem->end - mem->start + 1,
-			       "palm_bk3710") == NULL) {
-		printk(KERN_ERR "failed to request memory region\n");
-		return -EBUSY;
-	}
-
-	base = IO_ADDRESS(mem->start);
-
-	/* Configure the Palm Chip controller */
-	palm_bk3710_chipinit((void __iomem *)base);
-
-	for (i = 0; i < IDE_NR_PORTS - 2; i++)
-		hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i;
-	hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET;
-	hw.irq = irq->start;
-	hw.dev = &pdev->dev;
-	hw.chipset = ide_palm3710;
-
-	palm_bk3710_port_info.udma_mask = rate < 100000000 ? ATA_UDMA4 :
-							     ATA_UDMA5;
-
-	rc = ide_host_add(&palm_bk3710_port_info, hws, NULL);
-	if (rc)
-		goto out;
-
-	return 0;
-out:
-	printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n");
-	return rc;
-}
-
-/* work with hotplug and coldplug */
-MODULE_ALIAS("platform:palm_bk3710");
-
-static struct platform_driver platform_bk_driver = {
-	.driver = {
-		.name = "palm_bk3710",
-		.owner = THIS_MODULE,
-	},
-};
-
-static int __init palm_bk3710_init(void)
-{
-	return platform_driver_probe(&platform_bk_driver, palm_bk3710_probe);
-}
-
-module_init(palm_bk3710_init);
-MODULE_LICENSE("GPL");