ide: remove useless subdirs from drivers/ide/

Suggested-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

1 files changed, 0 insertions, 602 deletions

diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
deleted file mode 100644
index daf9dce39e52..000000000000
--- a/drivers/ide/pci/alim15x3.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/*
- *  Copyright (C) 1998-2000 Michel Aubry, Maintainer
- *  Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
- *  Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
- *
- *  Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
- *  May be copied or modified under the terms of the GNU General Public License
- *  Copyright (C) 2002 Alan Cox <alan@redhat.com>
- *  ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
- *  Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- *  Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
- *
- *  (U)DMA capable version of ali 1533/1543(C), 1535(D)
- *
- **********************************************************************
- *  9/7/99 --Parts from the above author are included and need to be
- *  converted into standard interface, once I finish the thought.
- *
- *  Recent changes
- *	Don't use LBA48 mode on ALi <= 0xC4
- *	Don't poke 0x79 with a non ALi northbridge
- *	Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang)
- *	Allow UDMA6 on revisions > 0xC4
- *
- *  Documentation
- *	Chipset documentation available under NDA only
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "alim15x3"
-
-/*
- * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
- * (this is DANGEROUS and could result in data corruption).
- */
-static int wdc_udma;
-
-module_param(wdc_udma, bool, 0);
-MODULE_PARM_DESC(wdc_udma,
-		 "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
-
-/*
- *	ALi devices are not plug in. Otherwise these static values would
- *	need to go. They ought to go away anyway
- */
- 
-static u8 m5229_revision;
-static u8 chip_is_1543c_e;
-static struct pci_dev *isa_dev;
-
-/**
- *	ali_set_pio_mode	-	set host controller for PIO mode
- *	@drive: drive
- *	@pio: PIO mode number
- *
- *	Program the controller for the given PIO mode.
- */
-
-static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-	ide_hwif_t *hwif = HWIF(drive);
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
-	int s_time = t->setup, a_time = t->active, c_time = t->cycle;
-	u8 s_clc, a_clc, r_clc;
-	unsigned long flags;
-	int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-	int port = hwif->channel ? 0x5c : 0x58;
-	int portFIFO = hwif->channel ? 0x55 : 0x54;
-	u8 cd_dma_fifo = 0, unit = drive->dn & 1;
-
-	if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
-		s_clc = 0;
-	if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8)
-		a_clc = 0;
-
-	if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
-		r_clc = 1;
-	} else {
-		if (r_clc >= 16)
-			r_clc = 0;
-	}
-	local_irq_save(flags);
-	
-	/* 
-	 * PIO mode => ATA FIFO on, ATAPI FIFO off
-	 */
-	pci_read_config_byte(dev, portFIFO, &cd_dma_fifo);
-	if (drive->media==ide_disk) {
-		if (unit) {
-			pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
-		} else {
-			pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
-		}
-	} else {
-		if (unit) {
-			pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
-		} else {
-			pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
-		}
-	}
-	
-	pci_write_config_byte(dev, port, s_clc);
-	pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
-	local_irq_restore(flags);
-}
-
-/**
- *	ali_udma_filter		-	compute UDMA mask
- *	@drive: IDE device
- *
- *	Return available UDMA modes.
- *
- *	The actual rules for the ALi are:
- *		No UDMA on revisions <= 0x20
- *		Disk only for revisions < 0xC2
- *		Not WDC drives on M1543C-E (?)
- */
-
-static u8 ali_udma_filter(ide_drive_t *drive)
-{
-	if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
-		if (drive->media != ide_disk)
-			return 0;
-		if (wdc_udma == 0 && chip_is_1543c_e &&
-		    strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
-			return 0;
-	}
-
-	return drive->hwif->ultra_mask;
-}
-
-/**
- *	ali_set_dma_mode	-	set host controller for DMA mode
- *	@drive: drive
- *	@speed: DMA mode
- *
- *	Configure the hardware for the desired IDE transfer mode.
- */
-
-static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-	ide_hwif_t *hwif	= HWIF(drive);
-	struct pci_dev *dev	= to_pci_dev(hwif->dev);
-	u8 speed1		= speed;
-	u8 unit			= drive->dn & 1;
-	u8 tmpbyte		= 0x00;
-	int m5229_udma		= (hwif->channel) ? 0x57 : 0x56;
-
-	if (speed == XFER_UDMA_6)
-		speed1 = 0x47;
-
-	if (speed < XFER_UDMA_0) {
-		u8 ultra_enable	= (unit) ? 0x7f : 0xf7;
-		/*
-		 * clear "ultra enable" bit
-		 */
-		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
-		tmpbyte &= ultra_enable;
-		pci_write_config_byte(dev, m5229_udma, tmpbyte);
-
-		/*
-		 * FIXME: Oh, my... DMA timings are never set.
-		 */
-	} else {
-		pci_read_config_byte(dev, m5229_udma, &tmpbyte);
-		tmpbyte &= (0x0f << ((1-unit) << 2));
-		/*
-		 * enable ultra dma and set timing
-		 */
-		tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
-		pci_write_config_byte(dev, m5229_udma, tmpbyte);
-		if (speed >= XFER_UDMA_3) {
-			pci_read_config_byte(dev, 0x4b, &tmpbyte);
-			tmpbyte |= 1;
-			pci_write_config_byte(dev, 0x4b, tmpbyte);
-		}
-	}
-}
-
-/**
- *	ali15x3_dma_setup	-	begin a DMA phase
- *	@drive:	target device
- *
- *	Returns 1 if the DMA cannot be performed, zero on success.
- */
-
-static int ali15x3_dma_setup(ide_drive_t *drive)
-{
-	if (m5229_revision < 0xC2 && drive->media != ide_disk) {
-		if (rq_data_dir(drive->hwif->hwgroup->rq))
-			return 1;	/* try PIO instead of DMA */
-	}
-	return ide_dma_setup(drive);
-}
-
-/**
- *	init_chipset_ali15x3	-	Initialise an ALi IDE controller
- *	@dev: PCI device
- *
- *	This function initializes the ALI IDE controller and where 
- *	appropriate also sets up the 1533 southbridge.
- */
-
-static unsigned int init_chipset_ali15x3(struct pci_dev *dev)
-{
-	unsigned long flags;
-	u8 tmpbyte;
-	struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
-
-	m5229_revision = dev->revision;
-
-	isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
-	local_irq_save(flags);
-
-	if (m5229_revision < 0xC2) {
-		/*
-		 * revision 0x20 (1543-E, 1543-F)
-		 * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E)
-		 * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7
-		 */
-		pci_read_config_byte(dev, 0x4b, &tmpbyte);
-		/*
-		 * clear bit 7
-		 */
-		pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
-		/*
-		 * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
-		 */
-		if (m5229_revision >= 0x20 && isa_dev) {
-			pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
-			chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
-		}
-		goto out;
-	}
-
-	/*
-	 * 1543C-B?, 1535, 1535D, 1553
-	 * Note 1: not all "motherboard" support this detection
-	 * Note 2: if no udma 66 device, the detection may "error".
-	 *         but in this case, we will not set the device to
-	 *         ultra 66, the detection result is not important
-	 */
-
-	/*
-	 * enable "Cable Detection", m5229, 0x4b, bit3
-	 */
-	pci_read_config_byte(dev, 0x4b, &tmpbyte);
-	pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08);
-
-	/*
-	 * We should only tune the 1533 enable if we are using an ALi
-	 * North bridge. We might have no north found on some zany
-	 * box without a device at 0:0.0. The ALi bridge will be at
-	 * 0:0.0 so if we didn't find one we know what is cooking.
-	 */
-	if (north && north->vendor != PCI_VENDOR_ID_AL)
-		goto out;
-
-	if (m5229_revision < 0xC5 && isa_dev)
-	{	
-		/*
-		 * set south-bridge's enable bit, m1533, 0x79
-		 */
-
-		pci_read_config_byte(isa_dev, 0x79, &tmpbyte);
-		if (m5229_revision == 0xC2) {
-			/*
-			 * 1543C-B0 (m1533, 0x79, bit 2)
-			 */
-			pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04);
-		} else if (m5229_revision >= 0xC3) {
-			/*
-			 * 1553/1535 (m1533, 0x79, bit 1)
-			 */
-			pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
-		}
-	}
-
-out:
-	/*
-	 * CD_ROM DMA on (m5229, 0x53, bit0)
-	 *      Enable this bit even if we want to use PIO.
-	 * PIO FIFO off (m5229, 0x53, bit1)
-	 *      The hardware will use 0x54h and 0x55h to control PIO FIFO.
-	 *	(Not on later devices it seems)
-	 *
-	 *	0x53 changes meaning on later revs - we must no touch
-	 *	bit 1 on them.  Need to check if 0x20 is the right break.
-	 */
-	if (m5229_revision >= 0x20) {
-		pci_read_config_byte(dev, 0x53, &tmpbyte);
-
-		if (m5229_revision <= 0x20)
-			tmpbyte = (tmpbyte & (~0x02)) | 0x01;
-		else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
-			tmpbyte |= 0x03;
-		else
-			tmpbyte |= 0x01;
-
-		pci_write_config_byte(dev, 0x53, tmpbyte);
-	}
-	pci_dev_put(north);
-	pci_dev_put(isa_dev);
-	local_irq_restore(flags);
-	return 0;
-}
-
-/*
- *	Cable special cases
- */
-
-static const struct dmi_system_id cable_dmi_table[] = {
-	{
-		.ident = "HP Pavilion N5430",
-		.matches = {
-			DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
-			DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
-		},
-	},
-	{
-		.ident = "Toshiba Satellite S1800-814",
-		.matches = {
-			DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
-			DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
-		},
-	},
-	{ }
-};
-
-static int ali_cable_override(struct pci_dev *pdev)
-{
-	/* Fujitsu P2000 */
-	if (pdev->subsystem_vendor == 0x10CF &&
-	    pdev->subsystem_device == 0x10AF)
-		return 1;
-
-	/* Mitac 8317 (Winbook-A) and relatives */
-	if (pdev->subsystem_vendor == 0x1071 &&
-	    pdev->subsystem_device == 0x8317)
-		return 1;
-
-	/* Systems by DMI */
-	if (dmi_check_system(cable_dmi_table))
-		return 1;
-
-	return 0;
-}
-
-/**
- *	ali_cable_detect	-	cable detection
- *	@hwif: IDE interface
- *
- *	This checks if the controller and the cable are capable
- *	of UDMA66 transfers. It doesn't check the drives.
- *	But see note 2 below!
- *
- *	FIXME: frobs bits that are not defined on newer ALi devicea
- */
-
-static u8 ali_cable_detect(ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long flags;
-	u8 cbl = ATA_CBL_PATA40, tmpbyte;
-
-	local_irq_save(flags);
-
-	if (m5229_revision >= 0xC2) {
-		/*
-		 * m5229 80-pin cable detection (from Host View)
-		 *
-		 * 0x4a bit0 is 0 => primary channel has 80-pin
-		 * 0x4a bit1 is 0 => secondary channel has 80-pin
-		 *
-		 * Certain laptops use short but suitable cables
-		 * and don't implement the detect logic.
-		 */
-		if (ali_cable_override(dev))
-			cbl = ATA_CBL_PATA40_SHORT;
-		else {
-			pci_read_config_byte(dev, 0x4a, &tmpbyte);
-			if ((tmpbyte & (1 << hwif->channel)) == 0)
-				cbl = ATA_CBL_PATA80;
-		}
-	}
-
-	local_irq_restore(flags);
-
-	return cbl;
-}
-
-#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
-/**
- *	init_hwif_ali15x3	-	Initialize the ALI IDE x86 stuff
- *	@hwif: interface to configure
- *
- *	Obtain the IRQ tables for an ALi based IDE solution on the PC
- *	class platforms. This part of the code isn't applicable to the
- *	Sparc and PowerPC systems.
- */
-
-static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	u8 ideic, inmir;
-	s8 irq_routing_table[] = { -1,  9, 3, 10, 4,  5, 7,  6,
-				      1, 11, 0, 12, 0, 14, 0, 15 };
-	int irq = -1;
-
-	if (dev->device == PCI_DEVICE_ID_AL_M5229)
-		hwif->irq = hwif->channel ? 15 : 14;
-
-	if (isa_dev) {
-		/*
-		 * read IDE interface control
-		 */
-		pci_read_config_byte(isa_dev, 0x58, &ideic);
-
-		/* bit0, bit1 */
-		ideic = ideic & 0x03;
-
-		/* get IRQ for IDE Controller */
-		if ((hwif->channel && ideic == 0x03) ||
-		    (!hwif->channel && !ideic)) {
-			/*
-			 * get SIRQ1 routing table
-			 */
-			pci_read_config_byte(isa_dev, 0x44, &inmir);
-			inmir = inmir & 0x0f;
-			irq = irq_routing_table[inmir];
-		} else if (hwif->channel && !(ideic & 0x01)) {
-			/*
-			 * get SIRQ2 routing table
-			 */
-			pci_read_config_byte(isa_dev, 0x75, &inmir);
-			inmir = inmir & 0x0f;
-			irq = irq_routing_table[inmir];
-		}
-		if(irq >= 0)
-			hwif->irq = irq;
-	}
-}
-#else
-#define init_hwif_ali15x3 NULL
-#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
-
-/**
- *	init_dma_ali15x3	-	set up DMA on ALi15x3
- *	@hwif: IDE interface
- *	@d: IDE port info
- *
- *	Set up the DMA functionality on the ALi 15x3.
- */
-
-static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
-				      const struct ide_port_info *d)
-{
-	struct pci_dev *dev = to_pci_dev(hwif->dev);
-	unsigned long base = ide_pci_dma_base(hwif, d);
-
-	if (base == 0)
-		return -1;
-
-	hwif->dma_base = base;
-
-	if (ide_pci_check_simplex(hwif, d) < 0)
-		return -1;
-
-	if (ide_pci_set_master(dev, d->name) < 0)
-		return -1;
-
-	if (!hwif->channel)
-		outb(inb(base + 2) & 0x60, base + 2);
-
-	printk(KERN_INFO "    %s: BM-DMA at 0x%04lx-0x%04lx\n",
-			 hwif->name, base, base + 7);
-
-	if (ide_allocate_dma_engine(hwif))
-		return -1;
-
-	hwif->dma_ops = &sff_dma_ops;
-
-	return 0;
-}
-
-static const struct ide_port_ops ali_port_ops = {
-	.set_pio_mode		= ali_set_pio_mode,
-	.set_dma_mode		= ali_set_dma_mode,
-	.udma_filter		= ali_udma_filter,
-	.cable_detect		= ali_cable_detect,
-};
-
-static const struct ide_dma_ops ali_dma_ops = {
-	.dma_host_set		= ide_dma_host_set,
-	.dma_setup		= ali15x3_dma_setup,
-	.dma_exec_cmd		= ide_dma_exec_cmd,
-	.dma_start		= ide_dma_start,
-	.dma_end		= ide_dma_end,
-	.dma_test_irq		= ide_dma_test_irq,
-	.dma_lost_irq		= ide_dma_lost_irq,
-	.dma_timeout		= ide_dma_timeout,
-};
-
-static const struct ide_port_info ali15x3_chipset __devinitdata = {
-	.name		= DRV_NAME,
-	.init_chipset	= init_chipset_ali15x3,
-	.init_hwif	= init_hwif_ali15x3,
-	.init_dma	= init_dma_ali15x3,
-	.port_ops	= &ali_port_ops,
-	.pio_mask	= ATA_PIO5,
-	.swdma_mask	= ATA_SWDMA2,
-	.mwdma_mask	= ATA_MWDMA2,
-};
-
-/**
- *	alim15x3_init_one	-	set up an ALi15x3 IDE controller
- *	@dev: PCI device to set up
- *
- *	Perform the actual set up for an ALi15x3 that has been found by the
- *	hot plug layer.
- */
- 
-static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
-	struct ide_port_info d = ali15x3_chipset;
-	u8 rev = dev->revision, idx = id->driver_data;
-
-	/* don't use LBA48 DMA on ALi devices before rev 0xC5 */
-	if (rev <= 0xC4)
-		d.host_flags |= IDE_HFLAG_NO_LBA48_DMA;
-
-	if (rev >= 0x20) {
-		if (rev == 0x20)
-			d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-
-		if (rev < 0xC2)
-			d.udma_mask = ATA_UDMA2;
-		else if (rev == 0xC2 || rev == 0xC3)
-			d.udma_mask = ATA_UDMA4;
-		else if (rev == 0xC4)
-			d.udma_mask = ATA_UDMA5;
-		else
-			d.udma_mask = ATA_UDMA6;
-
-		d.dma_ops = &ali_dma_ops;
-	} else {
-		d.host_flags |= IDE_HFLAG_NO_DMA;
-
-		d.mwdma_mask = d.swdma_mask = 0;
-	}
-
-	if (idx == 0)
-		d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
-
-	return ide_pci_init_one(dev, &d, NULL);
-}
-
-
-static const struct pci_device_id alim15x3_pci_tbl[] = {
-	{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
-	{ PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
-	{ 0, },
-};
-MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
-
-static struct pci_driver alim15x3_pci_driver = {
-	.name		= "ALI15x3_IDE",
-	.id_table	= alim15x3_pci_tbl,
-	.probe		= alim15x3_init_one,
-	.remove		= ide_pci_remove,
-	.suspend	= ide_pci_suspend,
-	.resume		= ide_pci_resume,
-};
-
-static int __init ali15x3_ide_init(void)
-{
-	return ide_pci_register_driver(&alim15x3_pci_driver);
-}
-
-static void __exit ali15x3_ide_exit(void)
-{
-	return pci_unregister_driver(&alim15x3_pci_driver);
-}
-
-module_init(ali15x3_ide_init);
-module_exit(ali15x3_ide_exit);
-
-MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
-MODULE_LICENSE("GPL");