summaryrefslogtreecommitdiff
path: root/drivers/ide/pci/cs5520.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/ide/pci/cs5520.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/ide/pci/cs5520.c')
-rw-r--r--drivers/ide/pci/cs5520.c274
1 files changed, 274 insertions, 0 deletions
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
new file mode 100644
index 000000000000..7dc24682d197
--- /dev/null
+++ b/drivers/ide/pci/cs5520.c
@@ -0,0 +1,274 @@
+/*
+ * IDE tuning and bus mastering support for the CS5510/CS5520
+ * chipsets
+ *
+ * The CS5510/CS5520 are slightly unusual devices. Unlike the
+ * typical IDE controllers they do bus mastering with the drive in
+ * PIO mode and smarter silicon.
+ *
+ * The practical upshot of this is that we must always tune the
+ * drive for the right PIO mode. We must also ignore all the blacklists
+ * and the drive bus mastering DMA information.
+ *
+ * *** This driver is strictly experimental ***
+ *
+ * (c) Copyright Red Hat Inc 2002
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * For the avoidance of doubt the "preferred form" of this code is one which
+ * is in an open non patent encumbered format. Where cryptographic key signing
+ * forms part of the process of creating an executable the information
+ * including keys needed to generate an equivalently functional executable
+ * are deemed to be part of the source code.
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/timer.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/blkdev.h>
+#include <linux/hdreg.h>
+
+#include <linux/interrupt.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/ide.h>
+#include <linux/dma-mapping.h>
+
+#include <asm/io.h>
+#include <asm/irq.h>
+
+struct pio_clocks
+{
+ int address;
+ int assert;
+ int recovery;
+};
+
+static struct pio_clocks cs5520_pio_clocks[]={
+ {3, 6, 11},
+ {2, 5, 6},
+ {1, 4, 3},
+ {1, 3, 2},
+ {1, 2, 1}
+};
+
+static int cs5520_tune_chipset(ide_drive_t *drive, u8 xferspeed)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+ struct pci_dev *pdev = hwif->pci_dev;
+ u8 speed = min((u8)XFER_PIO_4, xferspeed);
+ int pio = speed;
+ u8 reg;
+ int controller = drive->dn > 1 ? 1 : 0;
+ int error;
+
+ switch(speed)
+ {
+ case XFER_PIO_4:
+ case XFER_PIO_3:
+ case XFER_PIO_2:
+ case XFER_PIO_1:
+ case XFER_PIO_0:
+ pio -= XFER_PIO_0;
+ break;
+ default:
+ pio = 0;
+ printk(KERN_ERR "cs55x0: bad ide timing.\n");
+ }
+
+ printk("PIO clocking = %d\n", pio);
+
+ /* FIXME: if DMA = 1 do we need to set the DMA bit here ? */
+
+ /* 8bit CAT/CRT - 8bit command timing for channel */
+ pci_write_config_byte(pdev, 0x62 + controller,
+ (cs5520_pio_clocks[pio].recovery << 4) |
+ (cs5520_pio_clocks[pio].assert));
+
+ /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
+
+ /* FIXME: should these use address ? */
+ /* Data read timing */
+ pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
+ (cs5520_pio_clocks[pio].recovery << 4) |
+ (cs5520_pio_clocks[pio].assert));
+ /* Write command timing */
+ pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
+ (cs5520_pio_clocks[pio].recovery << 4) |
+ (cs5520_pio_clocks[pio].assert));
+
+ /* Set the DMA enable/disable flag */
+ reg = inb(hwif->dma_base + 0x02 + 8*controller);
+ reg |= 1<<((drive->dn&1)+5);
+ outb(reg, hwif->dma_base + 0x02 + 8*controller);
+
+ error = ide_config_drive_speed(drive, speed);
+ /* ATAPI is harder so leave it for now */
+ if(!error && drive->media == ide_disk)
+ error = hwif->ide_dma_on(drive);
+
+ return error;
+}
+
+static void cs5520_tune_drive(ide_drive_t *drive, u8 pio)
+{
+ pio = ide_get_best_pio_mode(drive, pio, 4, NULL);
+ cs5520_tune_chipset(drive, (XFER_PIO_0 + pio));
+}
+
+static int cs5520_config_drive_xfer_rate(ide_drive_t *drive)
+{
+ ide_hwif_t *hwif = HWIF(drive);
+
+ /* Tune the drive for PIO modes up to PIO 4 */
+ cs5520_tune_drive(drive, 4);
+ /* Then tell the core to use DMA operations */
+ return hwif->ide_dma_on(drive);
+}
+
+/*
+ * We provide a callback for our nonstandard DMA location
+ */
+
+static void __devinit cs5520_init_setup_dma(struct pci_dev *dev, ide_pci_device_t *d, ide_hwif_t *hwif)
+{
+ unsigned long bmide = pci_resource_start(dev, 2); /* Not the usual 4 */
+ if(hwif->mate && hwif->mate->dma_base) /* Second channel at primary + 8 */
+ bmide += 8;
+ ide_setup_dma(hwif, bmide, 8);
+}
+
+/*
+ * We wrap the DMA activate to set the vdma flag. This is needed
+ * so that the IDE DMA layer issues PIO not DMA commands over the
+ * DMA channel
+ */
+
+static int cs5520_dma_on(ide_drive_t *drive)
+{
+ drive->vdma = 1;
+ return 0;
+}
+
+static void __devinit init_hwif_cs5520(ide_hwif_t *hwif)
+{
+ hwif->tuneproc = &cs5520_tune_drive;
+ hwif->speedproc = &cs5520_tune_chipset;
+ hwif->ide_dma_check = &cs5520_config_drive_xfer_rate;
+ hwif->ide_dma_on = &cs5520_dma_on;
+
+ if(!noautodma)
+ hwif->autodma = 1;
+
+ if(!hwif->dma_base)
+ {
+ hwif->drives[0].autotune = 1;
+ hwif->drives[1].autotune = 1;
+ return;
+ }
+
+ hwif->atapi_dma = 0;
+ hwif->ultra_mask = 0;
+ hwif->swdma_mask = 0;
+ hwif->mwdma_mask = 0;
+
+ hwif->drives[0].autodma = hwif->autodma;
+ hwif->drives[1].autodma = hwif->autodma;
+}
+
+#define DECLARE_CS_DEV(name_str) \
+ { \
+ .name = name_str, \
+ .init_setup_dma = cs5520_init_setup_dma, \
+ .init_hwif = init_hwif_cs5520, \
+ .channels = 2, \
+ .autodma = AUTODMA, \
+ .bootable = ON_BOARD, \
+ .flags = IDEPCI_FLAG_ISA_PORTS, \
+ }
+
+static ide_pci_device_t cyrix_chipsets[] __devinitdata = {
+ /* 0 */ DECLARE_CS_DEV("Cyrix 5510"),
+ /* 1 */ DECLARE_CS_DEV("Cyrix 5520")
+};
+
+/*
+ * The 5510/5520 are a bit weird. They don't quite set up the way
+ * the PCI helper layer expects so we must do much of the set up
+ * work longhand.
+ */
+
+static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
+{
+ ata_index_t index;
+ ide_pci_device_t *d = &cyrix_chipsets[id->driver_data];
+
+ ide_setup_pci_noise(dev, d);
+
+ /* We must not grab the entire device, it has 'ISA' space in its
+ BARS too and we will freak out other bits of the kernel */
+ if(pci_enable_device_bars(dev, 1<<2))
+ {
+ printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
+ return 1;
+ }
+ pci_set_master(dev);
+ if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
+ printk(KERN_WARNING "cs5520: No suitable DMA available.\n");
+ return -ENODEV;
+ }
+
+ index.all = 0xf0f0;
+
+ /*
+ * Now the chipset is configured we can let the core
+ * do all the device setup for us
+ */
+
+ ide_pci_setup_ports(dev, d, 14, &index);
+
+ if((index.b.low & 0xf0) != 0xf0)
+ probe_hwif_init(&ide_hwifs[index.b.low]);
+ if((index.b.high & 0xf0) != 0xf0)
+ probe_hwif_init(&ide_hwifs[index.b.high]);
+ return 0;
+}
+
+static struct pci_device_id cs5520_pci_tbl[] = {
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5510, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
+ { PCI_VENDOR_ID_CYRIX, PCI_DEVICE_ID_CYRIX_5520, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1},
+ { 0, },
+};
+MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
+
+static struct pci_driver driver = {
+ .name = "Cyrix_IDE",
+ .id_table = cs5520_pci_tbl,
+ .probe = cs5520_init_one,
+};
+
+static int cs5520_ide_init(void)
+{
+ return ide_pci_register_driver(&driver);
+}
+
+module_init(cs5520_ide_init);
+
+MODULE_AUTHOR("Alan Cox");
+MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
+MODULE_LICENSE("GPL");