summaryrefslogtreecommitdiff
path: root/drivers/ide/pci
diff options
context:
space:
mode:
authorBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
committerBartlomiej Zolnierkiewicz <bzolnier@gmail.com>2008-10-21 20:57:23 +0200
commit2bfba3c444fe8b2ab1c38112a89d8f03b61136ca (patch)
tree17580eee63d868c9d6b97a6bc956a08f25631532 /drivers/ide/pci
parent2515ddc6db8eb49a79f0fe5e67ff09ac7c81eab4 (diff)
ide: remove useless subdirs from drivers/ide/
Suggested-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Diffstat (limited to 'drivers/ide/pci')
-rw-r--r--drivers/ide/pci/Makefile43
-rw-r--r--drivers/ide/pci/aec62xx.c329
-rw-r--r--drivers/ide/pci/alim15x3.c602
-rw-r--r--drivers/ide/pci/amd74xx.c346
-rw-r--r--drivers/ide/pci/atiixp.c209
-rw-r--r--drivers/ide/pci/cmd640.c836
-rw-r--r--drivers/ide/pci/cmd64x.c532
-rw-r--r--drivers/ide/pci/cs5520.c165
-rw-r--r--drivers/ide/pci/cs5530.c294
-rw-r--r--drivers/ide/pci/cs5535.c219
-rw-r--r--drivers/ide/pci/cy82c693.c358
-rw-r--r--drivers/ide/pci/delkin_cb.c192
-rw-r--r--drivers/ide/pci/generic.c193
-rw-r--r--drivers/ide/pci/hpt366.c1643
-rw-r--r--drivers/ide/pci/it8213.c216
-rw-r--r--drivers/ide/pci/it821x.c706
-rw-r--r--drivers/ide/pci/jmicron.c176
-rw-r--r--drivers/ide/pci/ns87415.c366
-rw-r--r--drivers/ide/pci/opti621.c247
-rw-r--r--drivers/ide/pci/pdc202xx_new.c588
-rw-r--r--drivers/ide/pci/pdc202xx_old.c453
-rw-r--r--drivers/ide/pci/piix.c480
-rw-r--r--drivers/ide/pci/rz1000.c85
-rw-r--r--drivers/ide/pci/sc1200.c357
-rw-r--r--drivers/ide/pci/scc_pata.c966
-rw-r--r--drivers/ide/pci/serverworks.c470
-rw-r--r--drivers/ide/pci/sgiioc4.c674
-rw-r--r--drivers/ide/pci/siimage.c857
-rw-r--r--drivers/ide/pci/sis5513.c641
-rw-r--r--drivers/ide/pci/sl82c105.c371
-rw-r--r--drivers/ide/pci/slc90e66.c181
-rw-r--r--drivers/ide/pci/tc86c001.c270
-rw-r--r--drivers/ide/pci/triflex.c142
-rw-r--r--drivers/ide/pci/trm290.c375
-rw-r--r--drivers/ide/pci/via82cxxx.c514
35 files changed, 0 insertions, 15096 deletions
diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile
deleted file mode 100644
index ab44a1f5f5a9..000000000000
--- a/drivers/ide/pci/Makefile
+++ /dev/null
@@ -1,43 +0,0 @@
-
-obj-$(CONFIG_BLK_DEV_AEC62XX) += aec62xx.o
-obj-$(CONFIG_BLK_DEV_ALI15X3) += alim15x3.o
-obj-$(CONFIG_BLK_DEV_AMD74XX) += amd74xx.o
-obj-$(CONFIG_BLK_DEV_ATIIXP) += atiixp.o
-obj-$(CONFIG_BLK_DEV_CELLEB) += scc_pata.o
-obj-$(CONFIG_BLK_DEV_CMD64X) += cmd64x.o
-obj-$(CONFIG_BLK_DEV_CS5520) += cs5520.o
-obj-$(CONFIG_BLK_DEV_CS5530) += cs5530.o
-obj-$(CONFIG_BLK_DEV_CS5535) += cs5535.o
-obj-$(CONFIG_BLK_DEV_SC1200) += sc1200.o
-obj-$(CONFIG_BLK_DEV_CY82C693) += cy82c693.o
-obj-$(CONFIG_BLK_DEV_DELKIN) += delkin_cb.o
-obj-$(CONFIG_BLK_DEV_HPT366) += hpt366.o
-obj-$(CONFIG_BLK_DEV_IT8213) += it8213.o
-obj-$(CONFIG_BLK_DEV_IT821X) += it821x.o
-obj-$(CONFIG_BLK_DEV_JMICRON) += jmicron.o
-obj-$(CONFIG_BLK_DEV_NS87415) += ns87415.o
-obj-$(CONFIG_BLK_DEV_OPTI621) += opti621.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_OLD) += pdc202xx_old.o
-obj-$(CONFIG_BLK_DEV_PDC202XX_NEW) += pdc202xx_new.o
-obj-$(CONFIG_BLK_DEV_PIIX) += piix.o
-obj-$(CONFIG_BLK_DEV_RZ1000) += rz1000.o
-obj-$(CONFIG_BLK_DEV_SVWKS) += serverworks.o
-obj-$(CONFIG_BLK_DEV_SGIIOC4) += sgiioc4.o
-obj-$(CONFIG_BLK_DEV_SIIMAGE) += siimage.o
-obj-$(CONFIG_BLK_DEV_SIS5513) += sis5513.o
-obj-$(CONFIG_BLK_DEV_SL82C105) += sl82c105.o
-obj-$(CONFIG_BLK_DEV_SLC90E66) += slc90e66.o
-obj-$(CONFIG_BLK_DEV_TC86C001) += tc86c001.o
-obj-$(CONFIG_BLK_DEV_TRIFLEX) += triflex.o
-obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o
-obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o
-
-# Must appear at the end of the block
-obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o
-ide-pci-generic-y += generic.o
-
-ifeq ($(CONFIG_BLK_DEV_CMD640), m)
- obj-m += cmd640.o
-endif
-
-EXTRA_CFLAGS := -Idrivers/ide
diff --git a/drivers/ide/pci/aec62xx.c b/drivers/ide/pci/aec62xx.c
deleted file mode 100644
index 4142c698e0d3..000000000000
--- a/drivers/ide/pci/aec62xx.c
+++ /dev/null
@@ -1,329 +0,0 @@
-/*
- * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "aec62xx"
-
-struct chipset_bus_clock_list_entry {
- u8 xfer_speed;
- u8 chipset_settings;
- u8 ultra_settings;
-};
-
-static const struct chipset_bus_clock_list_entry aec6xxx_33_base [] = {
- { XFER_UDMA_6, 0x31, 0x07 },
- { XFER_UDMA_5, 0x31, 0x06 },
- { XFER_UDMA_4, 0x31, 0x05 },
- { XFER_UDMA_3, 0x31, 0x04 },
- { XFER_UDMA_2, 0x31, 0x03 },
- { XFER_UDMA_1, 0x31, 0x02 },
- { XFER_UDMA_0, 0x31, 0x01 },
-
- { XFER_MW_DMA_2, 0x31, 0x00 },
- { XFER_MW_DMA_1, 0x31, 0x00 },
- { XFER_MW_DMA_0, 0x0a, 0x00 },
- { XFER_PIO_4, 0x31, 0x00 },
- { XFER_PIO_3, 0x33, 0x00 },
- { XFER_PIO_2, 0x08, 0x00 },
- { XFER_PIO_1, 0x0a, 0x00 },
- { XFER_PIO_0, 0x00, 0x00 },
- { 0, 0x00, 0x00 }
-};
-
-static const struct chipset_bus_clock_list_entry aec6xxx_34_base [] = {
- { XFER_UDMA_6, 0x41, 0x06 },
- { XFER_UDMA_5, 0x41, 0x05 },
- { XFER_UDMA_4, 0x41, 0x04 },
- { XFER_UDMA_3, 0x41, 0x03 },
- { XFER_UDMA_2, 0x41, 0x02 },
- { XFER_UDMA_1, 0x41, 0x01 },
- { XFER_UDMA_0, 0x41, 0x01 },
-
- { XFER_MW_DMA_2, 0x41, 0x00 },
- { XFER_MW_DMA_1, 0x42, 0x00 },
- { XFER_MW_DMA_0, 0x7a, 0x00 },
- { XFER_PIO_4, 0x41, 0x00 },
- { XFER_PIO_3, 0x43, 0x00 },
- { XFER_PIO_2, 0x78, 0x00 },
- { XFER_PIO_1, 0x7a, 0x00 },
- { XFER_PIO_0, 0x70, 0x00 },
- { 0, 0x00, 0x00 }
-};
-
-/*
- * TO DO: active tuning and correction of cards without a bios.
- */
-static u8 pci_bus_clock_list (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
-{
- for ( ; chipset_table->xfer_speed ; chipset_table++)
- if (chipset_table->xfer_speed == speed) {
- return chipset_table->chipset_settings;
- }
- return chipset_table->chipset_settings;
-}
-
-static u8 pci_bus_clock_list_ultra (u8 speed, struct chipset_bus_clock_list_entry * chipset_table)
-{
- for ( ; chipset_table->xfer_speed ; chipset_table++)
- if (chipset_table->xfer_speed == speed) {
- return chipset_table->ultra_settings;
- }
- return chipset_table->ultra_settings;
-}
-
-static void aec6210_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
- u16 d_conf = 0;
- u8 ultra = 0, ultra_conf = 0;
- u8 tmp0 = 0, tmp1 = 0, tmp2 = 0;
- unsigned long flags;
-
- local_irq_save(flags);
- /* 0x40|(2*drive->dn): Active, 0x41|(2*drive->dn): Recovery */
- pci_read_config_word(dev, 0x40|(2*drive->dn), &d_conf);
- tmp0 = pci_bus_clock_list(speed, bus_clock);
- d_conf = ((tmp0 & 0xf0) << 4) | (tmp0 & 0xf);
- pci_write_config_word(dev, 0x40|(2*drive->dn), d_conf);
-
- tmp1 = 0x00;
- tmp2 = 0x00;
- pci_read_config_byte(dev, 0x54, &ultra);
- tmp1 = ((0x00 << (2*drive->dn)) | (ultra & ~(3 << (2*drive->dn))));
- ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
- tmp2 = ((ultra_conf << (2*drive->dn)) | (tmp1 & ~(3 << (2*drive->dn))));
- pci_write_config_byte(dev, 0x54, tmp2);
- local_irq_restore(flags);
-}
-
-static void aec6260_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct chipset_bus_clock_list_entry *bus_clock = host->host_priv;
- u8 unit = drive->dn & 1;
- u8 tmp1 = 0, tmp2 = 0;
- u8 ultra = 0, drive_conf = 0, ultra_conf = 0;
- unsigned long flags;
-
- local_irq_save(flags);
- /* high 4-bits: Active, low 4-bits: Recovery */
- pci_read_config_byte(dev, 0x40|drive->dn, &drive_conf);
- drive_conf = pci_bus_clock_list(speed, bus_clock);
- pci_write_config_byte(dev, 0x40|drive->dn, drive_conf);
-
- pci_read_config_byte(dev, (0x44|hwif->channel), &ultra);
- tmp1 = ((0x00 << (4*unit)) | (ultra & ~(7 << (4*unit))));
- ultra_conf = pci_bus_clock_list_ultra(speed, bus_clock);
- tmp2 = ((ultra_conf << (4*unit)) | (tmp1 & ~(7 << (4*unit))));
- pci_write_config_byte(dev, (0x44|hwif->channel), tmp2);
- local_irq_restore(flags);
-}
-
-static void aec_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- drive->hwif->port_ops->set_dma_mode(drive, pio + XFER_PIO_0);
-}
-
-static unsigned int init_chipset_aec62xx(struct pci_dev *dev)
-{
- /* These are necessary to get AEC6280 Macintosh cards to work */
- if ((dev->device == PCI_DEVICE_ID_ARTOP_ATP865) ||
- (dev->device == PCI_DEVICE_ID_ARTOP_ATP865R)) {
- u8 reg49h = 0, reg4ah = 0;
- /* Clear reset and test bits. */
- pci_read_config_byte(dev, 0x49, &reg49h);
- pci_write_config_byte(dev, 0x49, reg49h & ~0x30);
- /* Enable chip interrupt output. */
- pci_read_config_byte(dev, 0x4a, &reg4ah);
- pci_write_config_byte(dev, 0x4a, reg4ah & ~0x01);
- /* Enable burst mode. */
- pci_read_config_byte(dev, 0x4a, &reg4ah);
- pci_write_config_byte(dev, 0x4a, reg4ah | 0x80);
- }
-
- return dev->irq;
-}
-
-static u8 atp86x_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 ata66 = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x49, &ata66);
-
- return (ata66 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static const struct ide_port_ops atp850_port_ops = {
- .set_pio_mode = aec_set_pio_mode,
- .set_dma_mode = aec6210_set_mode,
-};
-
-static const struct ide_port_ops atp86x_port_ops = {
- .set_pio_mode = aec_set_pio_mode,
- .set_dma_mode = aec6260_set_mode,
- .cable_detect = atp86x_cable_detect,
-};
-
-static const struct ide_port_info aec62xx_chipsets[] __devinitdata = {
- { /* 0: AEC6210 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .port_ops = &atp850_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_NO_DSC |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
- },
- { /* 1: AEC6260 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA | IDE_HFLAG_NO_AUTODMA |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
- },
- { /* 2: AEC6260R */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_NON_BOOTABLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
- },
- { /* 3: AEC6280 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 4: AEC6280R */
- .name = DRV_NAME,
- .init_chipset = init_chipset_aec62xx,
- .enablebits = {{0x4a,0x02,0x02}, {0x4a,0x04,0x04}},
- .port_ops = &atp86x_port_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
- IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- }
-};
-
-/**
- * aec62xx_init_one - called when a AEC is found
- * @dev: the aec62xx device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- *
- * NOTE: since we're going to modify the 'name' field for AEC-6[26]80[R]
- * chips, pass a local copy of 'struct ide_port_info' down the call chain.
- */
-
-static int __devinit aec62xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct chipset_bus_clock_list_entry *bus_clock;
- struct ide_port_info d;
- u8 idx = id->driver_data;
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- int err;
-
- if (bus_speed <= 33)
- bus_clock = aec6xxx_33_base;
- else
- bus_clock = aec6xxx_34_base;
-
- err = pci_enable_device(dev);
- if (err)
- return err;
-
- d = aec62xx_chipsets[idx];
-
- if (idx == 3 || idx == 4) {
- unsigned long dma_base = pci_resource_start(dev, 4);
-
- if (inb(dma_base + 2) & 0x10) {
- printk(KERN_INFO DRV_NAME " %s: AEC6880%s card detected"
- "\n", pci_name(dev), (idx == 4) ? "R" : "");
- d.udma_mask = ATA_UDMA6;
- }
- }
-
- err = ide_pci_init_one(dev, &d, (void *)bus_clock);
- if (err)
- pci_disable_device(dev);
-
- return err;
-}
-
-static void __devexit aec62xx_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id aec62xx_pci_tbl[] = {
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP850UF), 0 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860), 1 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP860R), 2 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865), 3 },
- { PCI_VDEVICE(ARTOP, PCI_DEVICE_ID_ARTOP_ATP865R), 4 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, aec62xx_pci_tbl);
-
-static struct pci_driver aec62xx_pci_driver = {
- .name = "AEC62xx_IDE",
- .id_table = aec62xx_pci_tbl,
- .probe = aec62xx_init_one,
- .remove = __devexit_p(aec62xx_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init aec62xx_ide_init(void)
-{
- return ide_pci_register_driver(&aec62xx_pci_driver);
-}
-
-static void __exit aec62xx_ide_exit(void)
-{
- pci_unregister_driver(&aec62xx_pci_driver);
-}
-
-module_init(aec62xx_ide_init);
-module_exit(aec62xx_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for ARTOP AEC62xx IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/alim15x3.c b/drivers/ide/pci/alim15x3.c
deleted file mode 100644
index daf9dce39e52..000000000000
--- a/drivers/ide/pci/alim15x3.c
+++ /dev/null
@@ -1,602 +0,0 @@
-/*
- * Copyright (C) 1998-2000 Michel Aubry, Maintainer
- * Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
- * Copyright (C) 1999-2000 CJ, cjtsai@ali.com.tw, Maintainer
- *
- * Copyright (C) 1998-2000 Andre Hedrick (andre@linux-ide.org)
- * May be copied or modified under the terms of the GNU General Public License
- * Copyright (C) 2002 Alan Cox <alan@redhat.com>
- * ALi (now ULi M5228) support by Clear Zhang <Clear.Zhang@ali.com.tw>
- * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
- *
- * (U)DMA capable version of ali 1533/1543(C), 1535(D)
- *
- **********************************************************************
- * 9/7/99 --Parts from the above author are included and need to be
- * converted into standard interface, once I finish the thought.
- *
- * Recent changes
- * Don't use LBA48 mode on ALi <= 0xC4
- * Don't poke 0x79 with a non ALi northbridge
- * Don't flip undefined bits on newer chipsets (fix Fujitsu laptop hang)
- * Allow UDMA6 on revisions > 0xC4
- *
- * Documentation
- * Chipset documentation available under NDA only
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/dmi.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "alim15x3"
-
-/*
- * Allow UDMA on M1543C-E chipset for WDC disks that ignore CRC checking
- * (this is DANGEROUS and could result in data corruption).
- */
-static int wdc_udma;
-
-module_param(wdc_udma, bool, 0);
-MODULE_PARM_DESC(wdc_udma,
- "allow UDMA on M1543C-E chipset for WDC disks (DANGEROUS)");
-
-/*
- * ALi devices are not plug in. Otherwise these static values would
- * need to go. They ought to go away anyway
- */
-
-static u8 m5229_revision;
-static u8 chip_is_1543c_e;
-static struct pci_dev *isa_dev;
-
-/**
- * ali_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Program the controller for the given PIO mode.
- */
-
-static void ali_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- int s_time = t->setup, a_time = t->active, c_time = t->cycle;
- u8 s_clc, a_clc, r_clc;
- unsigned long flags;
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
- int port = hwif->channel ? 0x5c : 0x58;
- int portFIFO = hwif->channel ? 0x55 : 0x54;
- u8 cd_dma_fifo = 0, unit = drive->dn & 1;
-
- if ((s_clc = (s_time * bus_speed + 999) / 1000) >= 8)
- s_clc = 0;
- if ((a_clc = (a_time * bus_speed + 999) / 1000) >= 8)
- a_clc = 0;
-
- if (!(r_clc = (c_time * bus_speed + 999) / 1000 - a_clc - s_clc)) {
- r_clc = 1;
- } else {
- if (r_clc >= 16)
- r_clc = 0;
- }
- local_irq_save(flags);
-
- /*
- * PIO mode => ATA FIFO on, ATAPI FIFO off
- */
- pci_read_config_byte(dev, portFIFO, &cd_dma_fifo);
- if (drive->media==ide_disk) {
- if (unit) {
- pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0x0F) | 0x50);
- } else {
- pci_write_config_byte(dev, portFIFO, (cd_dma_fifo & 0xF0) | 0x05);
- }
- } else {
- if (unit) {
- pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0x0F);
- } else {
- pci_write_config_byte(dev, portFIFO, cd_dma_fifo & 0xF0);
- }
- }
-
- pci_write_config_byte(dev, port, s_clc);
- pci_write_config_byte(dev, port + unit + 2, (a_clc << 4) | r_clc);
- local_irq_restore(flags);
-}
-
-/**
- * ali_udma_filter - compute UDMA mask
- * @drive: IDE device
- *
- * Return available UDMA modes.
- *
- * The actual rules for the ALi are:
- * No UDMA on revisions <= 0x20
- * Disk only for revisions < 0xC2
- * Not WDC drives on M1543C-E (?)
- */
-
-static u8 ali_udma_filter(ide_drive_t *drive)
-{
- if (m5229_revision > 0x20 && m5229_revision < 0xC2) {
- if (drive->media != ide_disk)
- return 0;
- if (wdc_udma == 0 && chip_is_1543c_e &&
- strstr((char *)&drive->id[ATA_ID_PROD], "WDC "))
- return 0;
- }
-
- return drive->hwif->ultra_mask;
-}
-
-/**
- * ali_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Configure the hardware for the desired IDE transfer mode.
- */
-
-static void ali_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 speed1 = speed;
- u8 unit = drive->dn & 1;
- u8 tmpbyte = 0x00;
- int m5229_udma = (hwif->channel) ? 0x57 : 0x56;
-
- if (speed == XFER_UDMA_6)
- speed1 = 0x47;
-
- if (speed < XFER_UDMA_0) {
- u8 ultra_enable = (unit) ? 0x7f : 0xf7;
- /*
- * clear "ultra enable" bit
- */
- pci_read_config_byte(dev, m5229_udma, &tmpbyte);
- tmpbyte &= ultra_enable;
- pci_write_config_byte(dev, m5229_udma, tmpbyte);
-
- /*
- * FIXME: Oh, my... DMA timings are never set.
- */
- } else {
- pci_read_config_byte(dev, m5229_udma, &tmpbyte);
- tmpbyte &= (0x0f << ((1-unit) << 2));
- /*
- * enable ultra dma and set timing
- */
- tmpbyte |= ((0x08 | ((4-speed1)&0x07)) << (unit << 2));
- pci_write_config_byte(dev, m5229_udma, tmpbyte);
- if (speed >= XFER_UDMA_3) {
- pci_read_config_byte(dev, 0x4b, &tmpbyte);
- tmpbyte |= 1;
- pci_write_config_byte(dev, 0x4b, tmpbyte);
- }
- }
-}
-
-/**
- * ali15x3_dma_setup - begin a DMA phase
- * @drive: target device
- *
- * Returns 1 if the DMA cannot be performed, zero on success.
- */
-
-static int ali15x3_dma_setup(ide_drive_t *drive)
-{
- if (m5229_revision < 0xC2 && drive->media != ide_disk) {
- if (rq_data_dir(drive->hwif->hwgroup->rq))
- return 1; /* try PIO instead of DMA */
- }
- return ide_dma_setup(drive);
-}
-
-/**
- * init_chipset_ali15x3 - Initialise an ALi IDE controller
- * @dev: PCI device
- *
- * This function initializes the ALI IDE controller and where
- * appropriate also sets up the 1533 southbridge.
- */
-
-static unsigned int init_chipset_ali15x3(struct pci_dev *dev)
-{
- unsigned long flags;
- u8 tmpbyte;
- struct pci_dev *north = pci_get_slot(dev->bus, PCI_DEVFN(0,0));
-
- m5229_revision = dev->revision;
-
- isa_dev = pci_get_device(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1533, NULL);
-
- local_irq_save(flags);
-
- if (m5229_revision < 0xC2) {
- /*
- * revision 0x20 (1543-E, 1543-F)
- * revision 0xC0, 0xC1 (1543C-C, 1543C-D, 1543C-E)
- * clear CD-ROM DMA write bit, m5229, 0x4b, bit 7
- */
- pci_read_config_byte(dev, 0x4b, &tmpbyte);
- /*
- * clear bit 7
- */
- pci_write_config_byte(dev, 0x4b, tmpbyte & 0x7F);
- /*
- * check m1533, 0x5e, bit 1~4 == 1001 => & 00011110 = 00010010
- */
- if (m5229_revision >= 0x20 && isa_dev) {
- pci_read_config_byte(isa_dev, 0x5e, &tmpbyte);
- chip_is_1543c_e = ((tmpbyte & 0x1e) == 0x12) ? 1: 0;
- }
- goto out;
- }
-
- /*
- * 1543C-B?, 1535, 1535D, 1553
- * Note 1: not all "motherboard" support this detection
- * Note 2: if no udma 66 device, the detection may "error".
- * but in this case, we will not set the device to
- * ultra 66, the detection result is not important
- */
-
- /*
- * enable "Cable Detection", m5229, 0x4b, bit3
- */
- pci_read_config_byte(dev, 0x4b, &tmpbyte);
- pci_write_config_byte(dev, 0x4b, tmpbyte | 0x08);
-
- /*
- * We should only tune the 1533 enable if we are using an ALi
- * North bridge. We might have no north found on some zany
- * box without a device at 0:0.0. The ALi bridge will be at
- * 0:0.0 so if we didn't find one we know what is cooking.
- */
- if (north && north->vendor != PCI_VENDOR_ID_AL)
- goto out;
-
- if (m5229_revision < 0xC5 && isa_dev)
- {
- /*
- * set south-bridge's enable bit, m1533, 0x79
- */
-
- pci_read_config_byte(isa_dev, 0x79, &tmpbyte);
- if (m5229_revision == 0xC2) {
- /*
- * 1543C-B0 (m1533, 0x79, bit 2)
- */
- pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x04);
- } else if (m5229_revision >= 0xC3) {
- /*
- * 1553/1535 (m1533, 0x79, bit 1)
- */
- pci_write_config_byte(isa_dev, 0x79, tmpbyte | 0x02);
- }
- }
-
-out:
- /*
- * CD_ROM DMA on (m5229, 0x53, bit0)
- * Enable this bit even if we want to use PIO.
- * PIO FIFO off (m5229, 0x53, bit1)
- * The hardware will use 0x54h and 0x55h to control PIO FIFO.
- * (Not on later devices it seems)
- *
- * 0x53 changes meaning on later revs - we must no touch
- * bit 1 on them. Need to check if 0x20 is the right break.
- */
- if (m5229_revision >= 0x20) {
- pci_read_config_byte(dev, 0x53, &tmpbyte);
-
- if (m5229_revision <= 0x20)
- tmpbyte = (tmpbyte & (~0x02)) | 0x01;
- else if (m5229_revision == 0xc7 || m5229_revision == 0xc8)
- tmpbyte |= 0x03;
- else
- tmpbyte |= 0x01;
-
- pci_write_config_byte(dev, 0x53, tmpbyte);
- }
- pci_dev_put(north);
- pci_dev_put(isa_dev);
- local_irq_restore(flags);
- return 0;
-}
-
-/*
- * Cable special cases
- */
-
-static const struct dmi_system_id cable_dmi_table[] = {
- {
- .ident = "HP Pavilion N5430",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Hewlett-Packard"),
- DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"),
- },
- },
- {
- .ident = "Toshiba Satellite S1800-814",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
- DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"),
- },
- },
- { }
-};
-
-static int ali_cable_override(struct pci_dev *pdev)
-{
- /* Fujitsu P2000 */
- if (pdev->subsystem_vendor == 0x10CF &&
- pdev->subsystem_device == 0x10AF)
- return 1;
-
- /* Mitac 8317 (Winbook-A) and relatives */
- if (pdev->subsystem_vendor == 0x1071 &&
- pdev->subsystem_device == 0x8317)
- return 1;
-
- /* Systems by DMI */
- if (dmi_check_system(cable_dmi_table))
- return 1;
-
- return 0;
-}
-
-/**
- * ali_cable_detect - cable detection
- * @hwif: IDE interface
- *
- * This checks if the controller and the cable are capable
- * of UDMA66 transfers. It doesn't check the drives.
- * But see note 2 below!
- *
- * FIXME: frobs bits that are not defined on newer ALi devicea
- */
-
-static u8 ali_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags;
- u8 cbl = ATA_CBL_PATA40, tmpbyte;
-
- local_irq_save(flags);
-
- if (m5229_revision >= 0xC2) {
- /*
- * m5229 80-pin cable detection (from Host View)
- *
- * 0x4a bit0 is 0 => primary channel has 80-pin
- * 0x4a bit1 is 0 => secondary channel has 80-pin
- *
- * Certain laptops use short but suitable cables
- * and don't implement the detect logic.
- */
- if (ali_cable_override(dev))
- cbl = ATA_CBL_PATA40_SHORT;
- else {
- pci_read_config_byte(dev, 0x4a, &tmpbyte);
- if ((tmpbyte & (1 << hwif->channel)) == 0)
- cbl = ATA_CBL_PATA80;
- }
- }
-
- local_irq_restore(flags);
-
- return cbl;
-}
-
-#if !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC)
-/**
- * init_hwif_ali15x3 - Initialize the ALI IDE x86 stuff
- * @hwif: interface to configure
- *
- * Obtain the IRQ tables for an ALi based IDE solution on the PC
- * class platforms. This part of the code isn't applicable to the
- * Sparc and PowerPC systems.
- */
-
-static void __devinit init_hwif_ali15x3 (ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 ideic, inmir;
- s8 irq_routing_table[] = { -1, 9, 3, 10, 4, 5, 7, 6,
- 1, 11, 0, 12, 0, 14, 0, 15 };
- int irq = -1;
-
- if (dev->device == PCI_DEVICE_ID_AL_M5229)
- hwif->irq = hwif->channel ? 15 : 14;
-
- if (isa_dev) {
- /*
- * read IDE interface control
- */
- pci_read_config_byte(isa_dev, 0x58, &ideic);
-
- /* bit0, bit1 */
- ideic = ideic & 0x03;
-
- /* get IRQ for IDE Controller */
- if ((hwif->channel && ideic == 0x03) ||
- (!hwif->channel && !ideic)) {
- /*
- * get SIRQ1 routing table
- */
- pci_read_config_byte(isa_dev, 0x44, &inmir);
- inmir = inmir & 0x0f;
- irq = irq_routing_table[inmir];
- } else if (hwif->channel && !(ideic & 0x01)) {
- /*
- * get SIRQ2 routing table
- */
- pci_read_config_byte(isa_dev, 0x75, &inmir);
- inmir = inmir & 0x0f;
- irq = irq_routing_table[inmir];
- }
- if(irq >= 0)
- hwif->irq = irq;
- }
-}
-#else
-#define init_hwif_ali15x3 NULL
-#endif /* !defined(CONFIG_SPARC64) && !defined(CONFIG_PPC) */
-
-/**
- * init_dma_ali15x3 - set up DMA on ALi15x3
- * @hwif: IDE interface
- * @d: IDE port info
- *
- * Set up the DMA functionality on the ALi 15x3.
- */
-
-static int __devinit init_dma_ali15x3(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = ide_pci_dma_base(hwif, d);
-
- if (base == 0)
- return -1;
-
- hwif->dma_base = base;
-
- if (ide_pci_check_simplex(hwif, d) < 0)
- return -1;
-
- if (ide_pci_set_master(dev, d->name) < 0)
- return -1;
-
- if (!hwif->channel)
- outb(inb(base + 2) & 0x60, base + 2);
-
- printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
- hwif->name, base, base + 7);
-
- if (ide_allocate_dma_engine(hwif))
- return -1;
-
- hwif->dma_ops = &sff_dma_ops;
-
- return 0;
-}
-
-static const struct ide_port_ops ali_port_ops = {
- .set_pio_mode = ali_set_pio_mode,
- .set_dma_mode = ali_set_dma_mode,
- .udma_filter = ali_udma_filter,
- .cable_detect = ali_cable_detect,
-};
-
-static const struct ide_dma_ops ali_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ali15x3_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info ali15x3_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_ali15x3,
- .init_hwif = init_hwif_ali15x3,
- .init_dma = init_dma_ali15x3,
- .port_ops = &ali_port_ops,
- .pio_mask = ATA_PIO5,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-/**
- * alim15x3_init_one - set up an ALi15x3 IDE controller
- * @dev: PCI device to set up
- *
- * Perform the actual set up for an ALi15x3 that has been found by the
- * hot plug layer.
- */
-
-static int __devinit alim15x3_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = ali15x3_chipset;
- u8 rev = dev->revision, idx = id->driver_data;
-
- /* don't use LBA48 DMA on ALi devices before rev 0xC5 */
- if (rev <= 0xC4)
- d.host_flags |= IDE_HFLAG_NO_LBA48_DMA;
-
- if (rev >= 0x20) {
- if (rev == 0x20)
- d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
-
- if (rev < 0xC2)
- d.udma_mask = ATA_UDMA2;
- else if (rev == 0xC2 || rev == 0xC3)
- d.udma_mask = ATA_UDMA4;
- else if (rev == 0xC4)
- d.udma_mask = ATA_UDMA5;
- else
- d.udma_mask = ATA_UDMA6;
-
- d.dma_ops = &ali_dma_ops;
- } else {
- d.host_flags |= IDE_HFLAG_NO_DMA;
-
- d.mwdma_mask = d.swdma_mask = 0;
- }
-
- if (idx == 0)
- d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-
-static const struct pci_device_id alim15x3_pci_tbl[] = {
- { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5229), 0 },
- { PCI_VDEVICE(AL, PCI_DEVICE_ID_AL_M5228), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, alim15x3_pci_tbl);
-
-static struct pci_driver alim15x3_pci_driver = {
- .name = "ALI15x3_IDE",
- .id_table = alim15x3_pci_tbl,
- .probe = alim15x3_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init ali15x3_ide_init(void)
-{
- return ide_pci_register_driver(&alim15x3_pci_driver);
-}
-
-static void __exit ali15x3_ide_exit(void)
-{
- return pci_unregister_driver(&alim15x3_pci_driver);
-}
-
-module_init(ali15x3_ide_init);
-module_exit(ali15x3_ide_exit);
-
-MODULE_AUTHOR("Michael Aubry, Andrzej Krzysztofowicz, CJ, Andre Hedrick, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for ALi 15x3 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/amd74xx.c b/drivers/ide/pci/amd74xx.c
deleted file mode 100644
index 81ec73134eda..000000000000
--- a/drivers/ide/pci/amd74xx.c
+++ /dev/null
@@ -1,346 +0,0 @@
-/*
- * AMD 755/756/766/8111 and nVidia nForce/2/2s/3/3s/CK804/MCP04
- * IDE driver for Linux.
- *
- * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
- *
- * Based on the work of:
- * Andre Hedrick
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "amd74xx"
-
-enum {
- AMD_IDE_CONFIG = 0x41,
- AMD_CABLE_DETECT = 0x42,
- AMD_DRIVE_TIMING = 0x48,
- AMD_8BIT_TIMING = 0x4e,
- AMD_ADDRESS_SETUP = 0x4c,
- AMD_UDMA_TIMING = 0x50,
-};
-
-static unsigned int amd_80w;
-static unsigned int amd_clock;
-
-static char *amd_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
-static unsigned char amd_cyc2udma[] = { 6, 6, 5, 4, 0, 1, 1, 2, 2, 3, 3, 3, 3, 3, 3, 7 };
-
-static inline u8 amd_offset(struct pci_dev *dev)
-{
- return (dev->vendor == PCI_VENDOR_ID_NVIDIA) ? 0x10 : 0;
-}
-
-/*
- * amd_set_speed() writes timing values to the chipset registers
- */
-
-static void amd_set_speed(struct pci_dev *dev, u8 dn, u8 udma_mask,
- struct ide_timing *timing)
-{
- u8 t = 0, offset = amd_offset(dev);
-
- pci_read_config_byte(dev, AMD_ADDRESS_SETUP + offset, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
- pci_write_config_byte(dev, AMD_ADDRESS_SETUP + offset, t);
-
- pci_write_config_byte(dev, AMD_8BIT_TIMING + offset + (1 - (dn >> 1)),
- ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
-
- pci_write_config_byte(dev, AMD_DRIVE_TIMING + offset + (3 - dn),
- ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
-
- switch (udma_mask) {
- case ATA_UDMA2: t = timing->udma ? (0xc0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
- case ATA_UDMA4: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 2, 10)]) : 0x03; break;
- case ATA_UDMA5: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 10)]) : 0x03; break;
- case ATA_UDMA6: t = timing->udma ? (0xc0 | amd_cyc2udma[clamp_val(timing->udma, 1, 15)]) : 0x03; break;
- default: return;
- }
-
- pci_write_config_byte(dev, AMD_UDMA_TIMING + offset + (3 - dn), t);
-}
-
-/*
- * amd_set_drive() computes timing values and configures the chipset
- * to a desired transfer mode. It also can be called by upper layers.
- */
-
-static void amd_set_drive(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- ide_drive_t *peer = hwif->drives + (~drive->dn & 1);
- struct ide_timing t, p;
- int T, UT;
- u8 udma_mask = hwif->ultra_mask;
-
- T = 1000000000 / amd_clock;
- UT = (udma_mask == ATA_UDMA2) ? T : (T / 2);
-
- ide_timing_compute(drive, speed, &t, T, UT);
-
- if (peer->dev_flags & IDE_DFLAG_PRESENT) {
- ide_timing_compute(peer, peer->current_speed, &p, T, UT);
- ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
- }
-
- if (speed == XFER_UDMA_5 && amd_clock <= 33333) t.udma = 1;
- if (speed == XFER_UDMA_6 && amd_clock <= 33333) t.udma = 15;
-
- amd_set_speed(dev, drive->dn, udma_mask, &t);
-}
-
-/*
- * amd_set_pio_mode() is a callback from upper layers for PIO-only tuning.
- */
-
-static void amd_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- amd_set_drive(drive, XFER_PIO_0 + pio);
-}
-
-static void amd7409_cable_detect(struct pci_dev *dev)
-{
- /* no host side cable detection */
- amd_80w = 0x03;
-}
-
-static void amd7411_cable_detect(struct pci_dev *dev)
-{
- int i;
- u32 u = 0;
- u8 t = 0, offset = amd_offset(dev);
-
- pci_read_config_byte(dev, AMD_CABLE_DETECT + offset, &t);
- pci_read_config_dword(dev, AMD_UDMA_TIMING + offset, &u);
- amd_80w = ((t & 0x3) ? 1 : 0) | ((t & 0xc) ? 2 : 0);
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 4) && !(amd_80w & (1 << (1 - (i >> 4))))) {
- printk(KERN_WARNING DRV_NAME " %s: BIOS didn't set "
- "cable bits correctly. Enabling workaround.\n",
- pci_name(dev));
- amd_80w |= (1 << (1 - (i >> 4)));
- }
-}
-
-/*
- * The initialization callback. Initialize drive independent registers.
- */
-
-static unsigned int init_chipset_amd74xx(struct pci_dev *dev)
-{
- u8 t = 0, offset = amd_offset(dev);
-
-/*
- * Check 80-wire cable presence.
- */
-
- if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->device == PCI_DEVICE_ID_AMD_COBRA_7401)
- ; /* no UDMA > 2 */
- else if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->device == PCI_DEVICE_ID_AMD_VIPER_7409)
- amd7409_cable_detect(dev);
- else
- amd7411_cable_detect(dev);
-
-/*
- * Take care of prefetch & postwrite.
- */
-
- pci_read_config_byte(dev, AMD_IDE_CONFIG + offset, &t);
- /*
- * Check for broken FIFO support.
- */
- if (dev->vendor == PCI_VENDOR_ID_AMD &&
- dev->vendor == PCI_DEVICE_ID_AMD_VIPER_7411)
- t &= 0x0f;
- else
- t |= 0xf0;
- pci_write_config_byte(dev, AMD_IDE_CONFIG + offset, t);
-
- return dev->irq;
-}
-
-static u8 amd_cable_detect(ide_hwif_t *hwif)
-{
- if ((amd_80w >> hwif->channel) & 1)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static void __devinit init_hwif_amd74xx(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (hwif->irq == 0) /* 0 is bogus but will do for now */
- hwif->irq = pci_get_legacy_ide_irq(dev, hwif->channel);
-}
-
-static const struct ide_port_ops amd_port_ops = {
- .set_pio_mode = amd_set_pio_mode,
- .set_dma_mode = amd_set_drive,
- .cable_detect = amd_cable_detect,
-};
-
-#define IDE_HFLAGS_AMD \
- (IDE_HFLAG_PIO_NO_BLACKLIST | \
- IDE_HFLAG_POST_SET_MODE | \
- IDE_HFLAG_IO_32BIT | \
- IDE_HFLAG_UNMASK_IRQS)
-
-#define DECLARE_AMD_DEV(swdma, udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_amd74xx, \
- .init_hwif = init_hwif_amd74xx, \
- .enablebits = {{0x40,0x02,0x02}, {0x40,0x01,0x01}}, \
- .port_ops = &amd_port_ops, \
- .host_flags = IDE_HFLAGS_AMD, \
- .pio_mask = ATA_PIO5, \
- .swdma_mask = swdma, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- }
-
-#define DECLARE_NV_DEV(udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_amd74xx, \
- .init_hwif = init_hwif_amd74xx, \
- .enablebits = {{0x50,0x02,0x02}, {0x50,0x01,0x01}}, \
- .port_ops = &amd_port_ops, \
- .host_flags = IDE_HFLAGS_AMD, \
- .pio_mask = ATA_PIO5, \
- .swdma_mask = ATA_SWDMA2, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- }
-
-static const struct ide_port_info amd74xx_chipsets[] __devinitdata = {
- /* 0: AMD7401 */ DECLARE_AMD_DEV(0x00, ATA_UDMA2),
- /* 1: AMD7409 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA4),
- /* 2: AMD7411/7441 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
- /* 3: AMD8111 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA6),
-
- /* 4: NFORCE */ DECLARE_NV_DEV(ATA_UDMA5),
- /* 5: >= NFORCE2 */ DECLARE_NV_DEV(ATA_UDMA6),
-
- /* 6: AMD5536 */ DECLARE_AMD_DEV(ATA_SWDMA2, ATA_UDMA5),
-};
-
-static int __devinit amd74xx_probe(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d;
- u8 idx = id->driver_data;
-
- d = amd74xx_chipsets[idx];
-
- /*
- * Check for bad SWDMA and incorrectly wired Serenade mainboards.
- */
- if (idx == 1) {
- if (dev->revision <= 7)
- d.swdma_mask = 0;
- d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
- } else if (idx == 3) {
- if (dev->subsystem_vendor == PCI_VENDOR_ID_AMD &&
- dev->subsystem_device == PCI_DEVICE_ID_AMD_SERENADE)
- d.udma_mask = ATA_UDMA5;
- }
-
- printk(KERN_INFO "%s %s: UDMA%s controller\n",
- d.name, pci_name(dev), amd_dma[fls(d.udma_mask) - 1]);
-
- /*
- * Determine the system bus clock.
- */
- amd_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
- switch (amd_clock) {
- case 33000: amd_clock = 33333; break;
- case 37000: amd_clock = 37500; break;
- case 41000: amd_clock = 41666; break;
- }
-
- if (amd_clock < 20000 || amd_clock > 50000) {
- printk(KERN_WARNING "%s: User given PCI clock speed impossible"
- " (%d), using 33 MHz instead.\n",
- d.name, amd_clock);
- amd_clock = 33333;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id amd74xx_pci_tbl[] = {
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_COBRA_7401), 0 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7409), 1 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_VIPER_7411), 2 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_OPUS_7441), 2 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_8111_IDE), 3 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_IDE), 4 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE), 5 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA), 5 },
-#endif
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE), 5 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2), 5 },
-#endif
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP65_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP67_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP73_IDE), 5 },
- { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP77_IDE), 5 },
- { PCI_VDEVICE(AMD, PCI_DEVICE_ID_AMD_CS5536_IDE), 6 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, amd74xx_pci_tbl);
-
-static struct pci_driver amd74xx_pci_driver = {
- .name = "AMD_IDE",
- .id_table = amd74xx_pci_tbl,
- .probe = amd74xx_probe,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init amd74xx_ide_init(void)
-{
- return ide_pci_register_driver(&amd74xx_pci_driver);
-}
-
-static void __exit amd74xx_ide_exit(void)
-{
- pci_unregister_driver(&amd74xx_pci_driver);
-}
-
-module_init(amd74xx_ide_init);
-module_exit(amd74xx_ide_exit);
-
-MODULE_AUTHOR("Vojtech Pavlik");
-MODULE_DESCRIPTION("AMD PCI IDE driver");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/atiixp.c b/drivers/ide/pci/atiixp.c
deleted file mode 100644
index b2735d28f5cc..000000000000
--- a/drivers/ide/pci/atiixp.c
+++ /dev/null
@@ -1,209 +0,0 @@
-/*
- * Copyright (C) 2003 ATI Inc. <hyu@ati.com>
- * Copyright (C) 2004,2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "atiixp"
-
-#define ATIIXP_IDE_PIO_TIMING 0x40
-#define ATIIXP_IDE_MDMA_TIMING 0x44
-#define ATIIXP_IDE_PIO_CONTROL 0x48
-#define ATIIXP_IDE_PIO_MODE 0x4a
-#define ATIIXP_IDE_UDMA_CONTROL 0x54
-#define ATIIXP_IDE_UDMA_MODE 0x56
-
-typedef struct {
- u8 command_width;
- u8 recover_width;
-} atiixp_ide_timing;
-
-static atiixp_ide_timing pio_timing[] = {
- { 0x05, 0x0d },
- { 0x04, 0x07 },
- { 0x03, 0x04 },
- { 0x02, 0x02 },
- { 0x02, 0x00 },
-};
-
-static atiixp_ide_timing mdma_timing[] = {
- { 0x07, 0x07 },
- { 0x02, 0x01 },
- { 0x02, 0x00 },
-};
-
-static DEFINE_SPINLOCK(atiixp_lock);
-
-/**
- * atiixp_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Set the interface PIO mode.
- */
-
-static void atiixp_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
- u32 pio_timing_data;
- u16 pio_mode_data;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_PIO_MODE, &pio_mode_data);
- pio_mode_data &= ~(0x07 << (drive->dn * 4));
- pio_mode_data |= (pio << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_PIO_MODE, pio_mode_data);
-
- pci_read_config_dword(dev, ATIIXP_IDE_PIO_TIMING, &pio_timing_data);
- pio_timing_data &= ~(0xff << timing_shift);
- pio_timing_data |= (pio_timing[pio].recover_width << timing_shift) |
- (pio_timing[pio].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_PIO_TIMING, pio_timing_data);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-/**
- * atiixp_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Set a ATIIXP host controller to the desired DMA mode. This involves
- * programming the right timing data into the PCI configuration space.
- */
-
-static void atiixp_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- unsigned long flags;
- int timing_shift = (drive->dn & 2) ? 16 : 0 + (drive->dn & 1) ? 0 : 8;
- u32 tmp32;
- u16 tmp16;
- u16 udma_ctl = 0;
-
- spin_lock_irqsave(&atiixp_lock, flags);
-
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, &udma_ctl);
-
- if (speed >= XFER_UDMA_0) {
- pci_read_config_word(dev, ATIIXP_IDE_UDMA_MODE, &tmp16);
- tmp16 &= ~(0x07 << (drive->dn * 4));
- tmp16 |= ((speed & 0x07) << (drive->dn * 4));
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_MODE, tmp16);
-
- udma_ctl |= (1 << drive->dn);
- } else if (speed >= XFER_MW_DMA_0) {
- u8 i = speed & 0x03;
-
- pci_read_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, &tmp32);
- tmp32 &= ~(0xff << timing_shift);
- tmp32 |= (mdma_timing[i].recover_width << timing_shift) |
- (mdma_timing[i].command_width << (timing_shift + 4));
- pci_write_config_dword(dev, ATIIXP_IDE_MDMA_TIMING, tmp32);
-
- udma_ctl &= ~(1 << drive->dn);
- }
-
- pci_write_config_word(dev, ATIIXP_IDE_UDMA_CONTROL, udma_ctl);
-
- spin_unlock_irqrestore(&atiixp_lock, flags);
-}
-
-static u8 atiixp_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u8 udma_mode = 0, ch = hwif->channel;
-
- pci_read_config_byte(pdev, ATIIXP_IDE_UDMA_MODE + ch, &udma_mode);
-
- if ((udma_mode & 0x07) >= 0x04 || (udma_mode & 0x70) >= 0x40)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops atiixp_port_ops = {
- .set_pio_mode = atiixp_set_pio_mode,
- .set_dma_mode = atiixp_set_dma_mode,
- .cable_detect = atiixp_cable_detect,
-};
-
-static const struct ide_port_info atiixp_pci_info[] __devinitdata = {
- { /* 0: IXP200/300/400/700 */
- .name = DRV_NAME,
- .enablebits = {{0x48,0x01,0x00}, {0x48,0x08,0x00}},
- .port_ops = &atiixp_port_ops,
- .host_flags = IDE_HFLAG_LEGACY_IRQS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 1: IXP600 */
- .name = DRV_NAME,
- .enablebits = {{0x48,0x01,0x00}, {0x00,0x00,0x00}},
- .port_ops = &atiixp_port_ops,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_LEGACY_IRQS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
-};
-
-/**
- * atiixp_init_one - called when a ATIIXP is found
- * @dev: the atiixp device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int __devinit atiixp_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &atiixp_pci_info[id->driver_data], NULL);
-}
-
-static const struct pci_device_id atiixp_pci_tbl[] = {
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP200_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP300_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP400_IDE), 0 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP600_IDE), 1 },
- { PCI_VDEVICE(ATI, PCI_DEVICE_ID_ATI_IXP700_IDE), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, atiixp_pci_tbl);
-
-static struct pci_driver atiixp_pci_driver = {
- .name = "ATIIXP_IDE",
- .id_table = atiixp_pci_tbl,
- .probe = atiixp_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init atiixp_ide_init(void)
-{
- return ide_pci_register_driver(&atiixp_pci_driver);
-}
-
-static void __exit atiixp_ide_exit(void)
-{
- pci_unregister_driver(&atiixp_pci_driver);
-}
-
-module_init(atiixp_ide_init);
-module_exit(atiixp_ide_exit);
-
-MODULE_AUTHOR("HUI YU");
-MODULE_DESCRIPTION("PCI driver module for ATI IXP IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
deleted file mode 100644
index e4306647d00d..000000000000
--- a/drivers/ide/pci/cmd640.c
+++ /dev/null
@@ -1,836 +0,0 @@
-/*
- * Copyright (C) 1995-1996 Linus Torvalds & authors (see below)
- */
-
-/*
- * Original authors: abramov@cecmow.enet.dec.com (Igor Abramov)
- * mlord@pobox.com (Mark Lord)
- *
- * See linux/MAINTAINERS for address of current maintainer.
- *
- * This file provides support for the advanced features and bugs
- * of IDE interfaces using the CMD Technologies 0640 IDE interface chip.
- *
- * These chips are basically fucked by design, and getting this driver
- * to work on every motherboard design that uses this screwed chip seems
- * bloody well impossible. However, we're still trying.
- *
- * Version 0.97 worked for everybody.
- *
- * User feedback is essential. Many thanks to the beta test team:
- *
- * A.Hartgers@stud.tue.nl, JZDQC@CUNYVM.CUNY.edu, abramov@cecmow.enet.dec.com,
- * bardj@utopia.ppp.sn.no, bart@gaga.tue.nl, bbol001@cs.auckland.ac.nz,
- * chrisc@dbass.demon.co.uk, dalecki@namu26.Num.Math.Uni-Goettingen.de,
- * derekn@vw.ece.cmu.edu, florian@btp2x3.phy.uni-bayreuth.de,
- * flynn@dei.unipd.it, gadio@netvision.net.il, godzilla@futuris.net,
- * j@pobox.com, jkemp1@mises.uni-paderborn.de, jtoppe@hiwaay.net,
- * kerouac@ssnet.com, meskes@informatik.rwth-aachen.de, hzoli@cs.elte.hu,
- * peter@udgaard.isgtec.com, phil@tazenda.demon.co.uk, roadcapw@cfw.com,
- * s0033las@sun10.vsz.bme.hu, schaffer@tam.cornell.edu, sjd@slip.net,
- * steve@ei.org, ulrpeg@bigcomm.gun.de, ism@tardis.ed.ac.uk, mack@cray.com
- * liug@mama.indstate.edu, and others.
- *
- * Version 0.01 Initial version, hacked out of ide.c,
- * and #include'd rather than compiled separately.
- * This will get cleaned up in a subsequent release.
- *
- * Version 0.02 Fixes for vlb initialization code, enable prefetch
- * for versions 'B' and 'C' of chip by default,
- * some code cleanup.
- *
- * Version 0.03 Added reset of secondary interface,
- * and black list for devices which are not compatible
- * with prefetch mode. Separate function for setting
- * prefetch is added, possibly it will be called some
- * day from ioctl processing code.
- *
- * Version 0.04 Now configs/compiles separate from ide.c
- *
- * Version 0.05 Major rewrite of interface timing code.
- * Added new function cmd640_set_mode to set PIO mode
- * from ioctl call. New drives added to black list.
- *
- * Version 0.06 More code cleanup. Prefetch is enabled only for
- * detected hard drives, not included in prefetch
- * black list.
- *
- * Version 0.07 Changed to more conservative drive tuning policy.
- * Unknown drives, which report PIO < 4 are set to
- * (reported_PIO - 1) if it is supported, or to PIO0.
- * List of known drives extended by info provided by
- * CMD at their ftp site.
- *
- * Version 0.08 Added autotune/noautotune support.
- *
- * Version 0.09 Try to be smarter about 2nd port enabling.
- * Version 0.10 Be nice and don't reset 2nd port.
- * Version 0.11 Try to handle more weird situations.
- *
- * Version 0.12 Lots of bug fixes from Laszlo Peter
- * irq unmasking disabled for reliability.
- * try to be even smarter about the second port.
- * tidy up source code formatting.
- * Version 0.13 permit irq unmasking again.
- * Version 0.90 massive code cleanup, some bugs fixed.
- * defaults all drives to PIO mode0, prefetch off.
- * autotune is OFF by default, with compile time flag.
- * prefetch can be turned OFF/ON using "hdparm -p8/-p9"
- * (requires hdparm-3.1 or newer)
- * Version 0.91 first release to linux-kernel list.
- * Version 0.92 move initial reg dump to separate callable function
- * change "readahead" to "prefetch" to avoid confusion
- * Version 0.95 respect original BIOS timings unless autotuning.
- * tons of code cleanup and rearrangement.
- * added CONFIG_BLK_DEV_CMD640_ENHANCED option
- * prevent use of unmask when prefetch is on
- * Version 0.96 prevent use of io_32bit when prefetch is off
- * Version 0.97 fix VLB secondary interface for sjd@slip.net
- * other minor tune-ups: 0.96 was very good.
- * Version 0.98 ignore PCI version when disabled by BIOS
- * Version 0.99 display setup/active/recovery clocks with PIO mode
- * Version 1.00 Mmm.. cannot depend on PCMD_ENA in all systems
- * Version 1.01 slow/fast devsel can be selected with "hdparm -p6/-p7"
- * ("fast" is necessary for 32bit I/O in some systems)
- * Version 1.02 fix bug that resulted in slow "setup times"
- * (patch courtesy of Zoltan Hidvegi)
- */
-
-#define CMD640_PREFETCH_MASKS 1
-
-/*#define CMD640_DUMP_REGS */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cmd640"
-
-static int cmd640_vlb;
-
-/*
- * CMD640 specific registers definition.
- */
-
-#define VID 0x00
-#define DID 0x02
-#define PCMD 0x04
-#define PCMD_ENA 0x01
-#define PSTTS 0x06
-#define REVID 0x08
-#define PROGIF 0x09
-#define SUBCL 0x0a
-#define BASCL 0x0b
-#define BaseA0 0x10
-#define BaseA1 0x14
-#define BaseA2 0x18
-#define BaseA3 0x1c
-#define INTLINE 0x3c
-#define INPINE 0x3d
-
-#define CFR 0x50
-#define CFR_DEVREV 0x03
-#define CFR_IDE01INTR 0x04
-#define CFR_DEVID 0x18
-#define CFR_AT_VESA_078h 0x20
-#define CFR_DSA1 0x40
-#define CFR_DSA0 0x80
-
-#define CNTRL 0x51
-#define CNTRL_DIS_RA0 0x40
-#define CNTRL_DIS_RA1 0x80
-#define CNTRL_ENA_2ND 0x08
-
-#define CMDTIM 0x52
-#define ARTTIM0 0x53
-#define DRWTIM0 0x54
-#define ARTTIM1 0x55
-#define DRWTIM1 0x56
-#define ARTTIM23 0x57
-#define ARTTIM23_DIS_RA2 0x04
-#define ARTTIM23_DIS_RA3 0x08
-#define DRWTIM23 0x58
-#define BRST 0x59
-
-/*
- * Registers and masks for easy access by drive index:
- */
-static u8 prefetch_regs[4] = {CNTRL, CNTRL, ARTTIM23, ARTTIM23};
-static u8 prefetch_masks[4] = {CNTRL_DIS_RA0, CNTRL_DIS_RA1, ARTTIM23_DIS_RA2, ARTTIM23_DIS_RA3};
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
-
-static u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-static u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM23, DRWTIM23};
-
-/*
- * Current cmd640 timing values for each drive.
- * The defaults for each are the slowest possible timings.
- */
-static u8 setup_counts[4] = {4, 4, 4, 4}; /* Address setup count (in clocks) */
-static u8 active_counts[4] = {16, 16, 16, 16}; /* Active count (encoded) */
-static u8 recovery_counts[4] = {16, 16, 16, 16}; /* Recovery count (encoded) */
-
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static DEFINE_SPINLOCK(cmd640_lock);
-
-/*
- * Interface to access cmd640x registers
- */
-static unsigned int cmd640_key;
-static void (*__put_cmd640_reg)(u16 reg, u8 val);
-static u8 (*__get_cmd640_reg)(u16 reg);
-
-/*
- * This is read from the CFR reg, and is used in several places.
- */
-static unsigned int cmd640_chip_version;
-
-/*
- * The CMD640x chip does not support DWORD config write cycles, but some
- * of the BIOSes use them to implement the config services.
- * Therefore, we must use direct IO instead.
- */
-
-/* PCI method 1 access */
-
-static void put_cmd640_reg_pci1(u16 reg, u8 val)
-{
- outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
- outb_p(val, (reg & 3) | 0xcfc);
-}
-
-static u8 get_cmd640_reg_pci1(u16 reg)
-{
- outl_p((reg & 0xfc) | cmd640_key, 0xcf8);
- return inb_p((reg & 3) | 0xcfc);
-}
-
-/* PCI method 2 access (from CMD datasheet) */
-
-static void put_cmd640_reg_pci2(u16 reg, u8 val)
-{
- outb_p(0x10, 0xcf8);
- outb_p(val, cmd640_key + reg);
- outb_p(0, 0xcf8);
-}
-
-static u8 get_cmd640_reg_pci2(u16 reg)
-{
- u8 b;
-
- outb_p(0x10, 0xcf8);
- b = inb_p(cmd640_key + reg);
- outb_p(0, 0xcf8);
- return b;
-}
-
-/* VLB access */
-
-static void put_cmd640_reg_vlb(u16 reg, u8 val)
-{
- outb_p(reg, cmd640_key);
- outb_p(val, cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg_vlb(u16 reg)
-{
- outb_p(reg, cmd640_key);
- return inb_p(cmd640_key + 4);
-}
-
-static u8 get_cmd640_reg(u16 reg)
-{
- unsigned long flags;
- u8 b;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- b = __get_cmd640_reg(reg);
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return b;
-}
-
-static void put_cmd640_reg(u16 reg, u8 val)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- __put_cmd640_reg(reg, val);
- spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-static int __init match_pci_cmd640_device(void)
-{
- const u8 ven_dev[4] = {0x95, 0x10, 0x40, 0x06};
- unsigned int i;
- for (i = 0; i < 4; i++) {
- if (get_cmd640_reg(i) != ven_dev[i])
- return 0;
- }
-#ifdef STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT
- if ((get_cmd640_reg(PCMD) & PCMD_ENA) == 0) {
- printk("ide: cmd640 on PCI disabled by BIOS\n");
- return 0;
- }
-#endif /* STUPIDLY_TRUST_BROKEN_PCMD_ENA_BIT */
- return 1; /* success */
-}
-
-/*
- * Probe for CMD640x -- pci method 1
- */
-static int __init probe_for_cmd640_pci1(void)
-{
- __get_cmd640_reg = get_cmd640_reg_pci1;
- __put_cmd640_reg = put_cmd640_reg_pci1;
- for (cmd640_key = 0x80000000;
- cmd640_key <= 0x8000f800;
- cmd640_key += 0x800) {
- if (match_pci_cmd640_device())
- return 1; /* success */
- }
- return 0;
-}
-
-/*
- * Probe for CMD640x -- pci method 2
- */
-static int __init probe_for_cmd640_pci2(void)
-{
- __get_cmd640_reg = get_cmd640_reg_pci2;
- __put_cmd640_reg = put_cmd640_reg_pci2;
- for (cmd640_key = 0xc000; cmd640_key <= 0xcf00; cmd640_key += 0x100) {
- if (match_pci_cmd640_device())
- return 1; /* success */
- }
- return 0;
-}
-
-/*
- * Probe for CMD640x -- vlb
- */
-static int __init probe_for_cmd640_vlb(void)
-{
- u8 b;
-
- __get_cmd640_reg = get_cmd640_reg_vlb;
- __put_cmd640_reg = put_cmd640_reg_vlb;
- cmd640_key = 0x178;
- b = get_cmd640_reg(CFR);
- if (b == 0xff || b == 0x00 || (b & CFR_AT_VESA_078h)) {
- cmd640_key = 0x78;
- b = get_cmd640_reg(CFR);
- if (b == 0xff || b == 0x00 || !(b & CFR_AT_VESA_078h))
- return 0;
- }
- return 1; /* success */
-}
-
-/*
- * Returns 1 if an IDE interface/drive exists at 0x170,
- * Returns 0 otherwise.
- */
-static int __init secondary_port_responding(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cmd640_lock, flags);
-
- outb_p(0x0a, 0x176); /* select drive0 */
- udelay(100);
- if ((inb_p(0x176) & 0x1f) != 0x0a) {
- outb_p(0x1a, 0x176); /* select drive1 */
- udelay(100);
- if ((inb_p(0x176) & 0x1f) != 0x1a) {
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 0; /* nothing responded */
- }
- }
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 1; /* success */
-}
-
-#ifdef CMD640_DUMP_REGS
-/*
- * Dump out all cmd640 registers. May be called from ide.c
- */
-static void cmd640_dump_regs(void)
-{
- unsigned int reg = cmd640_vlb ? 0x50 : 0x00;
-
- /* Dump current state of chip registers */
- printk("ide: cmd640 internal register dump:");
- for (; reg <= 0x59; reg++) {
- if (!(reg & 0x0f))
- printk("\n%04x:", reg);
- printk(" %02x", get_cmd640_reg(reg));
- }
- printk("\n");
-}
-#endif
-
-static void __set_prefetch_mode(ide_drive_t *drive, int mode)
-{
- if (mode) { /* want prefetch on? */
-#if CMD640_PREFETCH_MASKS
- drive->dev_flags |= IDE_DFLAG_NO_UNMASK;
- drive->dev_flags &= ~IDE_DFLAG_UNMASK;
-#endif
- drive->dev_flags &= ~IDE_DFLAG_NO_IO_32BIT;
- } else {
- drive->dev_flags &= ~IDE_DFLAG_NO_UNMASK;
- drive->dev_flags |= IDE_DFLAG_NO_IO_32BIT;
- drive->io_32bit = 0;
- }
-}
-
-#ifndef CONFIG_BLK_DEV_CMD640_ENHANCED
-/*
- * Check whether prefetch is on for a drive,
- * and initialize the unmask flags for safe operation.
- */
-static void __init check_prefetch(ide_drive_t *drive, unsigned int index)
-{
- u8 b = get_cmd640_reg(prefetch_regs[index]);
-
- __set_prefetch_mode(drive, (b & prefetch_masks[index]) ? 0 : 1);
-}
-#else
-
-/*
- * Sets prefetch mode for a drive.
- */
-static void set_prefetch_mode(ide_drive_t *drive, unsigned int index, int mode)
-{
- unsigned long flags;
- int reg = prefetch_regs[index];
- u8 b;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- b = __get_cmd640_reg(reg);
- __set_prefetch_mode(drive, mode);
- if (mode)
- b &= ~prefetch_masks[index]; /* enable prefetch */
- else
- b |= prefetch_masks[index]; /* disable prefetch */
- __put_cmd640_reg(reg, b);
- spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-/*
- * Dump out current drive clocks settings
- */
-static void display_clocks(unsigned int index)
-{
- u8 active_count, recovery_count;
-
- active_count = active_counts[index];
- if (active_count == 1)
- ++active_count;
- recovery_count = recovery_counts[index];
- if (active_count > 3 && recovery_count == 1)
- ++recovery_count;
- if (cmd640_chip_version > 1)
- recovery_count += 1; /* cmd640b uses (count + 1)*/
- printk(", clocks=%d/%d/%d\n", setup_counts[index], active_count, recovery_count);
-}
-
-/*
- * Pack active and recovery counts into single byte representation
- * used by controller
- */
-static inline u8 pack_nibbles(u8 upper, u8 lower)
-{
- return ((upper & 0x0f) << 4) | (lower & 0x0f);
-}
-
-/*
- * This routine writes the prepared setup/active/recovery counts
- * for a drive into the cmd640 chipset registers to active them.
- */
-static void program_drive_counts(ide_drive_t *drive, unsigned int index)
-{
- unsigned long flags;
- u8 setup_count = setup_counts[index];
- u8 active_count = active_counts[index];
- u8 recovery_count = recovery_counts[index];
-
- /*
- * Set up address setup count and drive read/write timing registers.
- * Primary interface has individual count/timing registers for
- * each drive. Secondary interface has one common set of registers,
- * so we merge the timings, using the slowest value for each timing.
- */
- if (index > 1) {
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *peer = &hwif->drives[!(drive->dn & 1)];
- unsigned int mate = index ^ 1;
-
- if (peer->dev_flags & IDE_DFLAG_PRESENT) {
- if (setup_count < setup_counts[mate])
- setup_count = setup_counts[mate];
- if (active_count < active_counts[mate])
- active_count = active_counts[mate];
- if (recovery_count < recovery_counts[mate])
- recovery_count = recovery_counts[mate];
- }
- }
-
- /*
- * Convert setup_count to internal chipset representation
- */
- switch (setup_count) {
- case 4: setup_count = 0x00; break;
- case 3: setup_count = 0x80; break;
- case 1:
- case 2: setup_count = 0x40; break;
- default: setup_count = 0xc0; /* case 5 */
- }
-
- /*
- * Now that everything is ready, program the new timings
- */
- spin_lock_irqsave(&cmd640_lock, flags);
- /*
- * Program the address_setup clocks into ARTTIM reg,
- * and then the active/recovery counts into the DRWTIM reg
- * (this converts counts of 16 into counts of zero -- okay).
- */
- setup_count |= __get_cmd640_reg(arttim_regs[index]) & 0x3f;
- __put_cmd640_reg(arttim_regs[index], setup_count);
- __put_cmd640_reg(drwtim_regs[index], pack_nibbles(active_count, recovery_count));
- spin_unlock_irqrestore(&cmd640_lock, flags);
-}
-
-/*
- * Set a specific pio_mode for a drive
- */
-static void cmd640_set_mode(ide_drive_t *drive, unsigned int index,
- u8 pio_mode, unsigned int cycle_time)
-{
- struct ide_timing *t;
- int setup_time, active_time, recovery_time, clock_time;
- u8 setup_count, active_count, recovery_count, recovery_count2, cycle_count;
- int bus_speed;
-
- if (cmd640_vlb)
- bus_speed = ide_vlb_clk ? ide_vlb_clk : 50;
- else
- bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-
- if (pio_mode > 5)
- pio_mode = 5;
-
- t = ide_timing_find_mode(XFER_PIO_0 + pio_mode);
- setup_time = t->setup;
- active_time = t->active;
-
- recovery_time = cycle_time - (setup_time + active_time);
- clock_time = 1000 / bus_speed;
- cycle_count = DIV_ROUND_UP(cycle_time, clock_time);
-
- setup_count = DIV_ROUND_UP(setup_time, clock_time);
-
- active_count = DIV_ROUND_UP(active_time, clock_time);
- if (active_count < 2)
- active_count = 2; /* minimum allowed by cmd640 */
-
- recovery_count = DIV_ROUND_UP(recovery_time, clock_time);
- recovery_count2 = cycle_count - (setup_count + active_count);
- if (recovery_count2 > recovery_count)
- recovery_count = recovery_count2;
- if (recovery_count < 2)
- recovery_count = 2; /* minimum allowed by cmd640 */
- if (recovery_count > 17) {
- active_count += recovery_count - 17;
- recovery_count = 17;
- }
- if (active_count > 16)
- active_count = 16; /* maximum allowed by cmd640 */
- if (cmd640_chip_version > 1)
- recovery_count -= 1; /* cmd640b uses (count + 1)*/
- if (recovery_count > 16)
- recovery_count = 16; /* maximum allowed by cmd640 */
-
- setup_counts[index] = setup_count;
- active_counts[index] = active_count;
- recovery_counts[index] = recovery_count;
-
- /*
- * In a perfect world, we might set the drive pio mode here
- * (using WIN_SETFEATURE) before continuing.
- *
- * But we do not, because:
- * 1) this is the wrong place to do it (proper is do_special() in ide.c)
- * 2) in practice this is rarely, if ever, necessary
- */
- program_drive_counts(drive, index);
-}
-
-static void cmd640_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- unsigned int index = 0, cycle_time;
- u8 b;
-
- switch (pio) {
- case 6: /* set fast-devsel off */
- case 7: /* set fast-devsel on */
- b = get_cmd640_reg(CNTRL) & ~0x27;
- if (pio & 1)
- b |= 0x27;
- put_cmd640_reg(CNTRL, b);
- printk("%s: %sabled cmd640 fast host timing (devsel)\n",
- drive->name, (pio & 1) ? "en" : "dis");
- return;
- case 8: /* set prefetch off */
- case 9: /* set prefetch on */
- set_prefetch_mode(drive, index, pio & 1);
- printk("%s: %sabled cmd640 prefetch\n",
- drive->name, (pio & 1) ? "en" : "dis");
- return;
- }
-
- cycle_time = ide_pio_cycle_time(drive, pio);
- cmd640_set_mode(drive, index, pio, cycle_time);
-
- printk("%s: selected cmd640 PIO mode%d (%dns)",
- drive->name, pio, cycle_time);
-
- display_clocks(index);
-}
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-
-static void cmd640_init_dev(ide_drive_t *drive)
-{
- unsigned int i = drive->hwif->channel * 2 + (drive->dn & 1);
-
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- /*
- * Reset timing to the slowest speed and turn off prefetch.
- * This way, the drive identify code has a better chance.
- */
- setup_counts[i] = 4; /* max possible */
- active_counts[i] = 16; /* max possible */
- recovery_counts[i] = 16; /* max possible */
- program_drive_counts(drive, i);
- set_prefetch_mode(drive, i, 0);
- printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch cleared\n", i);
-#else
- /*
- * Set the drive unmask flags to match the prefetch setting.
- */
- check_prefetch(drive, i);
- printk(KERN_INFO DRV_NAME ": drive%d timings/prefetch(%s) preserved\n",
- i, (drive->dev_flags & IDE_DFLAG_NO_IO_32BIT) ? "off" : "on");
-#endif /* CONFIG_BLK_DEV_CMD640_ENHANCED */
-}
-
-
-static const struct ide_port_ops cmd640_port_ops = {
- .init_dev = cmd640_init_dev,
-#ifdef CONFIG_BLK_DEV_CMD640_ENHANCED
- .set_pio_mode = cmd640_set_pio_mode,
-#endif
-};
-
-static int pci_conf1(void)
-{
- unsigned long flags;
- u32 tmp;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- outb(0x01, 0xCFB);
- tmp = inl(0xCF8);
- outl(0x80000000, 0xCF8);
- if (inl(0xCF8) == 0x80000000) {
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 1;
- }
- outl(tmp, 0xCF8);
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 0;
-}
-
-static int pci_conf2(void)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&cmd640_lock, flags);
- outb(0x00, 0xCFB);
- outb(0x00, 0xCF8);
- outb(0x00, 0xCFA);
- if (inb(0xCF8) == 0x00 && inb(0xCF8) == 0x00) {
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 1;
- }
- spin_unlock_irqrestore(&cmd640_lock, flags);
- return 0;
-}
-
-static const struct ide_port_info cmd640_port_info __initdata = {
- .chipset = ide_cmd640,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_NO_DMA |
- IDE_HFLAG_ABUSE_PREFETCH |
- IDE_HFLAG_ABUSE_FAST_DEVSEL,
- .port_ops = &cmd640_port_ops,
- .pio_mask = ATA_PIO5,
-};
-
-static int cmd640x_init_one(unsigned long base, unsigned long ctl)
-{
- if (!request_region(base, 8, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX-0x%lX not free.\n",
- DRV_NAME, base, base + 7);
- return -EBUSY;
- }
-
- if (!request_region(ctl, 1, DRV_NAME)) {
- printk(KERN_ERR "%s: I/O resource 0x%lX not free.\n",
- DRV_NAME, ctl);
- release_region(base, 8);
- return -EBUSY;
- }
-
- return 0;
-}
-
-/*
- * Probe for a cmd640 chipset, and initialize it if found.
- */
-static int __init cmd640x_init(void)
-{
- int second_port_cmd640 = 0, rc;
- const char *bus_type, *port2;
- u8 b, cfr;
- hw_regs_t hw[2], *hws[] = { NULL, NULL, NULL, NULL };
-
- if (cmd640_vlb && probe_for_cmd640_vlb()) {
- bus_type = "VLB";
- } else {
- cmd640_vlb = 0;
- /* Find out what kind of PCI probing is supported otherwise
- Justin Gibbs will sulk.. */
- if (pci_conf1() && probe_for_cmd640_pci1())
- bus_type = "PCI (type1)";
- else if (pci_conf2() && probe_for_cmd640_pci2())
- bus_type = "PCI (type2)";
- else
- return 0;
- }
- /*
- * Undocumented magic (there is no 0x5b reg in specs)
- */
- put_cmd640_reg(0x5b, 0xbd);
- if (get_cmd640_reg(0x5b) != 0xbd) {
- printk(KERN_ERR "ide: cmd640 init failed: wrong value in reg 0x5b\n");
- return 0;
- }
- put_cmd640_reg(0x5b, 0);
-
-#ifdef CMD640_DUMP_REGS
- cmd640_dump_regs();
-#endif
-
- /*
- * Documented magic begins here
- */
- cfr = get_cmd640_reg(CFR);
- cmd640_chip_version = cfr & CFR_DEVREV;
- if (cmd640_chip_version == 0) {
- printk("ide: bad cmd640 revision: %d\n", cmd640_chip_version);
- return 0;
- }
-
- rc = cmd640x_init_one(0x1f0, 0x3f6);
- if (rc)
- return rc;
-
- rc = cmd640x_init_one(0x170, 0x376);
- if (rc) {
- release_region(0x3f6, 1);
- release_region(0x1f0, 8);
- return rc;
- }
-
- memset(&hw, 0, sizeof(hw));
-
- ide_std_init_ports(&hw[0], 0x1f0, 0x3f6);
- hw[0].irq = 14;
- hw[0].chipset = ide_cmd640;
-
- ide_std_init_ports(&hw[1], 0x170, 0x376);
- hw[1].irq = 15;
- hw[1].chipset = ide_cmd640;
-
- printk(KERN_INFO "cmd640: buggy cmd640%c interface on %s, config=0x%02x"
- "\n", 'a' + cmd640_chip_version - 1, bus_type, cfr);
-
- /*
- * Initialize data for primary port
- */
- hws[0] = &hw[0];
-
- /*
- * Ensure compatibility by always using the slowest timings
- * for access to the drive's command register block,
- * and reset the prefetch burstsize to default (512 bytes).
- *
- * Maybe we need a way to NOT do these on *some* systems?
- */
- put_cmd640_reg(CMDTIM, 0);
- put_cmd640_reg(BRST, 0x40);
-
- b = get_cmd640_reg(CNTRL);
-
- /*
- * Try to enable the secondary interface, if not already enabled
- */
- if (secondary_port_responding()) {
- if ((b & CNTRL_ENA_2ND)) {
- second_port_cmd640 = 1;
- port2 = "okay";
- } else if (cmd640_vlb) {
- second_port_cmd640 = 1;
- port2 = "alive";
- } else
- port2 = "not cmd640";
- } else {
- put_cmd640_reg(CNTRL, b ^ CNTRL_ENA_2ND); /* toggle the bit */
- if (secondary_port_responding()) {
- second_port_cmd640 = 1;
- port2 = "enabled";
- } else {
- put_cmd640_reg(CNTRL, b); /* restore original setting */
- port2 = "not responding";
- }
- }
-
- /*
- * Initialize data for secondary cmd640 port, if enabled
- */
- if (second_port_cmd640)
- hws[1] = &hw[1];
-
- printk(KERN_INFO "cmd640: %sserialized, secondary interface %s\n",
- second_port_cmd640 ? "" : "not ", port2);
-
-#ifdef CMD640_DUMP_REGS
- cmd640_dump_regs();
-#endif
-
- return ide_host_add(&cmd640_port_info, hws, NULL);
-}
-
-module_param_named(probe_vlb, cmd640_vlb, bool, 0);
-MODULE_PARM_DESC(probe_vlb, "probe for VLB version of CMD640 chipset");
-
-module_init(cmd640x_init);
-
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cmd64x.c b/drivers/ide/pci/cmd64x.c
deleted file mode 100644
index 935385c77e06..000000000000
--- a/drivers/ide/pci/cmd64x.c
+++ /dev/null
@@ -1,532 +0,0 @@
-/*
- * cmd64x.c: Enable interrupts at initialization time on Ultra/PCI machines.
- * Due to massive hardware bugs, UltraDMA is only supported
- * on the 646U2 and not on the 646U.
- *
- * Copyright (C) 1998 Eddie C. Dost (ecd@skynet.be)
- * Copyright (C) 1998 David S. Miller (davem@redhat.com)
- *
- * Copyright (C) 1999-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007 MontaVista Software, Inc. <source@mvista.com>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cmd64x"
-
-#define CMD_DEBUG 0
-
-#if CMD_DEBUG
-#define cmdprintk(x...) printk(x)
-#else
-#define cmdprintk(x...)
-#endif
-
-/*
- * CMD64x specific registers definition.
- */
-#define CFR 0x50
-#define CFR_INTR_CH0 0x04
-
-#define CMDTIM 0x52
-#define ARTTIM0 0x53
-#define DRWTIM0 0x54
-#define ARTTIM1 0x55
-#define DRWTIM1 0x56
-#define ARTTIM23 0x57
-#define ARTTIM23_DIS_RA2 0x04
-#define ARTTIM23_DIS_RA3 0x08
-#define ARTTIM23_INTR_CH1 0x10
-#define DRWTIM2 0x58
-#define BRST 0x59
-#define DRWTIM3 0x5b
-
-#define BMIDECR0 0x70
-#define MRDMODE 0x71
-#define MRDMODE_INTR_CH0 0x04
-#define MRDMODE_INTR_CH1 0x08
-#define UDIDETCR0 0x73
-#define DTPR0 0x74
-#define BMIDECR1 0x78
-#define BMIDECSR 0x79
-#define UDIDETCR1 0x7B
-#define DTPR1 0x7C
-
-static u8 quantize_timing(int timing, int quant)
-{
- return (timing + quant - 1) / quant;
-}
-
-/*
- * This routine calculates active/recovery counts and then writes them into
- * the chipset registers.
- */
-static void program_cycle_times (ide_drive_t *drive, int cycle_time, int active_time)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- int clock_time = 1000 / (ide_pci_clk ? ide_pci_clk : 33);
- u8 cycle_count, active_count, recovery_count, drwtim;
- static const u8 recovery_values[] =
- {15, 15, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, 0};
- static const u8 drwtim_regs[4] = {DRWTIM0, DRWTIM1, DRWTIM2, DRWTIM3};
-
- cmdprintk("program_cycle_times parameters: total=%d, active=%d\n",
- cycle_time, active_time);
-
- cycle_count = quantize_timing( cycle_time, clock_time);
- active_count = quantize_timing(active_time, clock_time);
- recovery_count = cycle_count - active_count;
-
- /*
- * In case we've got too long recovery phase, try to lengthen
- * the active phase
- */
- if (recovery_count > 16) {
- active_count += recovery_count - 16;
- recovery_count = 16;
- }
- if (active_count > 16) /* shouldn't actually happen... */
- active_count = 16;
-
- cmdprintk("Final counts: total=%d, active=%d, recovery=%d\n",
- cycle_count, active_count, recovery_count);
-
- /*
- * Convert values to internal chipset representation
- */
- recovery_count = recovery_values[recovery_count];
- active_count &= 0x0f;
-
- /* Program the active/recovery counts into the DRWTIM register */
- drwtim = (active_count << 4) | recovery_count;
- (void) pci_write_config_byte(dev, drwtim_regs[drive->dn], drwtim);
- cmdprintk("Write 0x%02x to reg 0x%x\n", drwtim, drwtim_regs[drive->dn]);
-}
-
-/*
- * This routine writes into the chipset registers
- * PIO setup/active/recovery timings.
- */
-static void cmd64x_tune_pio(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- unsigned int cycle_time;
- u8 setup_count, arttim = 0;
-
- static const u8 setup_values[] = {0x40, 0x40, 0x40, 0x80, 0, 0xc0};
- static const u8 arttim_regs[4] = {ARTTIM0, ARTTIM1, ARTTIM23, ARTTIM23};
-
- cycle_time = ide_pio_cycle_time(drive, pio);
-
- program_cycle_times(drive, cycle_time, t->active);
-
- setup_count = quantize_timing(t->setup,
- 1000 / (ide_pci_clk ? ide_pci_clk : 33));
-
- /*
- * The primary channel has individual address setup timing registers
- * for each drive and the hardware selects the slowest timing itself.
- * The secondary channel has one common register and we have to select
- * the slowest address setup timing ourselves.
- */
- if (hwif->channel) {
- ide_drive_t *drives = hwif->drives;
-
- drive->drive_data = setup_count;
- setup_count = max(drives[0].drive_data, drives[1].drive_data);
- }
-
- if (setup_count > 5) /* shouldn't actually happen... */
- setup_count = 5;
- cmdprintk("Final address setup count: %d\n", setup_count);
-
- /*
- * Program the address setup clocks into the ARTTIM registers.
- * Avoid clearing the secondary channel's interrupt bit.
- */
- (void) pci_read_config_byte (dev, arttim_regs[drive->dn], &arttim);
- if (hwif->channel)
- arttim &= ~ARTTIM23_INTR_CH1;
- arttim &= ~0xc0;
- arttim |= setup_values[setup_count];
- (void) pci_write_config_byte(dev, arttim_regs[drive->dn], arttim);
- cmdprintk("Write 0x%02x to reg 0x%x\n", arttim, arttim_regs[drive->dn]);
-}
-
-/*
- * Attempts to set drive's PIO mode.
- * Special cases are 8: prefetch off, 9: prefetch on (both never worked)
- */
-
-static void cmd64x_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- /*
- * Filter out the prefetch control values
- * to prevent PIO5 from being programmed
- */
- if (pio == 8 || pio == 9)
- return;
-
- cmd64x_tune_pio(drive, pio);
-}
-
-static void cmd64x_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 unit = drive->dn & 0x01;
- u8 regU = 0, pciU = hwif->channel ? UDIDETCR1 : UDIDETCR0;
-
- if (speed >= XFER_SW_DMA_0) {
- (void) pci_read_config_byte(dev, pciU, &regU);
- regU &= ~(unit ? 0xCA : 0x35);
- }
-
- switch(speed) {
- case XFER_UDMA_5:
- regU |= unit ? 0x0A : 0x05;
- break;
- case XFER_UDMA_4:
- regU |= unit ? 0x4A : 0x15;
- break;
- case XFER_UDMA_3:
- regU |= unit ? 0x8A : 0x25;
- break;
- case XFER_UDMA_2:
- regU |= unit ? 0x42 : 0x11;
- break;
- case XFER_UDMA_1:
- regU |= unit ? 0x82 : 0x21;
- break;
- case XFER_UDMA_0:
- regU |= unit ? 0xC2 : 0x31;
- break;
- case XFER_MW_DMA_2:
- program_cycle_times(drive, 120, 70);
- break;
- case XFER_MW_DMA_1:
- program_cycle_times(drive, 150, 80);
- break;
- case XFER_MW_DMA_0:
- program_cycle_times(drive, 480, 215);
- break;
- }
-
- if (speed >= XFER_SW_DMA_0)
- (void) pci_write_config_byte(dev, pciU, regU);
-}
-
-static int cmd648_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long base = hwif->dma_base - (hwif->channel * 8);
- int err = ide_dma_end(drive);
- u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
- MRDMODE_INTR_CH0;
- u8 mrdmode = inb(base + 1);
-
- /* clear the interrupt bit */
- outb((mrdmode & ~(MRDMODE_INTR_CH0 | MRDMODE_INTR_CH1)) | irq_mask,
- base + 1);
-
- return err;
-}
-
-static int cmd64x_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int irq_reg = hwif->channel ? ARTTIM23 : CFR;
- u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
- CFR_INTR_CH0;
- u8 irq_stat = 0;
- int err = ide_dma_end(drive);
-
- (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
- /* clear the interrupt bit */
- (void) pci_write_config_byte(dev, irq_reg, irq_stat | irq_mask);
-
- return err;
-}
-
-static int cmd648_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long base = hwif->dma_base - (hwif->channel * 8);
- u8 irq_mask = hwif->channel ? MRDMODE_INTR_CH1 :
- MRDMODE_INTR_CH0;
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- u8 mrdmode = inb(base + 1);
-
-#ifdef DEBUG
- printk("%s: dma_stat: 0x%02x mrdmode: 0x%02x irq_mask: 0x%02x\n",
- drive->name, dma_stat, mrdmode, irq_mask);
-#endif
- if (!(mrdmode & irq_mask))
- return 0;
-
- /* return 1 if INTR asserted */
- if (dma_stat & 4)
- return 1;
-
- return 0;
-}
-
-static int cmd64x_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int irq_reg = hwif->channel ? ARTTIM23 : CFR;
- u8 irq_mask = hwif->channel ? ARTTIM23_INTR_CH1 :
- CFR_INTR_CH0;
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- u8 irq_stat = 0;
-
- (void) pci_read_config_byte(dev, irq_reg, &irq_stat);
-
-#ifdef DEBUG
- printk("%s: dma_stat: 0x%02x irq_stat: 0x%02x irq_mask: 0x%02x\n",
- drive->name, dma_stat, irq_stat, irq_mask);
-#endif
- if (!(irq_stat & irq_mask))
- return 0;
-
- /* return 1 if INTR asserted */
- if (dma_stat & 4)
- return 1;
-
- return 0;
-}
-
-/*
- * ASUS P55T2P4D with CMD646 chipset revision 0x01 requires the old
- * event order for DMA transfers.
- */
-
-static int cmd646_1_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = 0, dma_cmd = 0;
-
- drive->waiting_for_dma = 0;
- /* get DMA status */
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- /* read DMA command state */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- /* stop DMA */
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- /* clear the INTR & ERROR bits */
- outb(dma_stat | 6, hwif->dma_base + ATA_DMA_STATUS);
- /* and free any DMA resources */
- ide_destroy_dmatable(drive);
- /* verify good DMA status */
- return (dma_stat & 7) != 4;
-}
-
-static unsigned int init_chipset_cmd64x(struct pci_dev *dev)
-{
- u8 mrdmode = 0;
-
- /* Set a good latency timer and cache line size value. */
- (void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
- /* FIXME: pci_set_master() to ensure a good latency timer value */
-
- /*
- * Enable interrupts, select MEMORY READ LINE for reads.
- *
- * NOTE: although not mentioned in the PCI0646U specs,
- * bits 0-1 are write only and won't be read back as
- * set or not -- PCI0646U2 specs clarify this point.
- */
- (void) pci_read_config_byte (dev, MRDMODE, &mrdmode);
- mrdmode &= ~0x30;
- (void) pci_write_config_byte(dev, MRDMODE, (mrdmode | 0x02));
-
- return 0;
-}
-
-static u8 cmd64x_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 bmidecsr = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- switch (dev->device) {
- case PCI_DEVICE_ID_CMD_648:
- case PCI_DEVICE_ID_CMD_649:
- pci_read_config_byte(dev, BMIDECSR, &bmidecsr);
- return (bmidecsr & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- default:
- return ATA_CBL_PATA40;
- }
-}
-
-static const struct ide_port_ops cmd64x_port_ops = {
- .set_pio_mode = cmd64x_set_pio_mode,
- .set_dma_mode = cmd64x_set_dma_mode,
- .cable_detect = cmd64x_cable_detect,
-};
-
-static const struct ide_dma_ops cmd64x_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = cmd64x_dma_end,
- .dma_test_irq = cmd64x_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_dma_ops cmd646_rev1_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = cmd646_1_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_dma_ops cmd648_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = cmd648_dma_end,
- .dma_test_irq = cmd648_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info cmd64x_chipsets[] __devinitdata = {
- { /* 0: CMD643 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x00,0x00,0x00}, {0x51,0x08,0x08}},
- .port_ops = &cmd64x_port_ops,
- .dma_ops = &cmd64x_dma_ops,
- .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
- IDE_HFLAG_ABUSE_PREFETCH,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = 0x00, /* no udma */
- },
- { /* 1: CMD646 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
- .chipset = ide_cmd646,
- .port_ops = &cmd64x_port_ops,
- .dma_ops = &cmd648_dma_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
- },
- { /* 2: CMD648 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
- .port_ops = &cmd64x_port_ops,
- .dma_ops = &cmd648_dma_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
- },
- { /* 3: CMD649 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_cmd64x,
- .enablebits = {{0x51,0x04,0x04}, {0x51,0x08,0x08}},
- .port_ops = &cmd64x_port_ops,
- .dma_ops = &cmd648_dma_ops,
- .host_flags = IDE_HFLAG_ABUSE_PREFETCH,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- }
-};
-
-static int __devinit cmd64x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d;
- u8 idx = id->driver_data;
-
- d = cmd64x_chipsets[idx];
-
- if (idx == 1) {
- /*
- * UltraDMA only supported on PCI646U and PCI646U2, which
- * correspond to revisions 0x03, 0x05 and 0x07 respectively.
- * Actually, although the CMD tech support people won't
- * tell me the details, the 0x03 revision cannot support
- * UDMA correctly without hardware modifications, and even
- * then it only works with Quantum disks due to some
- * hold time assumptions in the 646U part which are fixed
- * in the 646U2.
- *
- * So we only do UltraDMA on revision 0x05 and 0x07 chipsets.
- */
- if (dev->revision < 5) {
- d.udma_mask = 0x00;
- /*
- * The original PCI0646 didn't have the primary
- * channel enable bit, it appeared starting with
- * PCI0646U (i.e. revision ID 3).
- */
- if (dev->revision < 3) {
- d.enablebits[0].reg = 0;
- if (dev->revision == 1)
- d.dma_ops = &cmd646_rev1_dma_ops;
- else
- d.dma_ops = &cmd64x_dma_ops;
- }
- }
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id cmd64x_pci_tbl[] = {
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_643), 0 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_646), 1 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_648), 2 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_CMD_649), 3 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cmd64x_pci_tbl);
-
-static struct pci_driver cmd64x_pci_driver = {
- .name = "CMD64x_IDE",
- .id_table = cmd64x_pci_tbl,
- .probe = cmd64x_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cmd64x_ide_init(void)
-{
- return ide_pci_register_driver(&cmd64x_pci_driver);
-}
-
-static void __exit cmd64x_ide_exit(void)
-{
- pci_unregister_driver(&cmd64x_pci_driver);
-}
-
-module_init(cmd64x_ide_init);
-module_exit(cmd64x_ide_exit);
-
-MODULE_AUTHOR("Eddie Dost, David Miller, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for CMD64x IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cs5520.c b/drivers/ide/pci/cs5520.c
deleted file mode 100644
index 5efb467f8fa0..000000000000
--- a/drivers/ide/pci/cs5520.c
+++ /dev/null
@@ -1,165 +0,0 @@
-/*
- * IDE tuning and bus mastering support for the CS5510/CS5520
- * chipsets
- *
- * The CS5510/CS5520 are slightly unusual devices. Unlike the
- * typical IDE controllers they do bus mastering with the drive in
- * PIO mode and smarter silicon.
- *
- * The practical upshot of this is that we must always tune the
- * drive for the right PIO mode. We must also ignore all the blacklists
- * and the drive bus mastering DMA information.
- *
- * *** This driver is strictly experimental ***
- *
- * (c) Copyright Red Hat Inc 2002
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * For the avoidance of doubt the "preferred form" of this code is one which
- * is in an open non patent encumbered format. Where cryptographic key signing
- * forms part of the process of creating an executable the information
- * including keys needed to generate an equivalently functional executable
- * are deemed to be part of the source code.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/dma-mapping.h>
-
-#define DRV_NAME "cs5520"
-
-struct pio_clocks
-{
- int address;
- int assert;
- int recovery;
-};
-
-static struct pio_clocks cs5520_pio_clocks[]={
- {3, 6, 11},
- {2, 5, 6},
- {1, 4, 3},
- {1, 3, 2},
- {1, 2, 1}
-};
-
-static void cs5520_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- int controller = drive->dn > 1 ? 1 : 0;
-
- /* 8bit CAT/CRT - 8bit command timing for channel */
- pci_write_config_byte(pdev, 0x62 + controller,
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
-
- /* 0x64 - 16bit Primary, 0x68 - 16bit Secondary */
-
- /* FIXME: should these use address ? */
- /* Data read timing */
- pci_write_config_byte(pdev, 0x64 + 4*controller + (drive->dn&1),
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
- /* Write command timing */
- pci_write_config_byte(pdev, 0x66 + 4*controller + (drive->dn&1),
- (cs5520_pio_clocks[pio].recovery << 4) |
- (cs5520_pio_clocks[pio].assert));
-}
-
-static void cs5520_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- printk(KERN_ERR "cs55x0: bad ide timing.\n");
-
- cs5520_set_pio_mode(drive, 0);
-}
-
-static const struct ide_port_ops cs5520_port_ops = {
- .set_pio_mode = cs5520_set_pio_mode,
- .set_dma_mode = cs5520_set_dma_mode,
-};
-
-static const struct ide_port_info cyrix_chipset __devinitdata = {
- .name = DRV_NAME,
- .enablebits = { { 0x60, 0x01, 0x01 }, { 0x60, 0x02, 0x02 } },
- .port_ops = &cs5520_port_ops,
- .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_CS5520,
- .pio_mask = ATA_PIO4,
-};
-
-/*
- * The 5510/5520 are a bit weird. They don't quite set up the way
- * the PCI helper layer expects so we must do much of the set up
- * work longhand.
- */
-
-static int __devinit cs5520_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d = &cyrix_chipset;
- hw_regs_t hw[4], *hws[] = { NULL, NULL, NULL, NULL };
-
- ide_setup_pci_noise(dev, d);
-
- /* We must not grab the entire device, it has 'ISA' space in its
- * BARS too and we will freak out other bits of the kernel
- */
- if (pci_enable_device_io(dev)) {
- printk(KERN_WARNING "%s: Unable to enable 55x0.\n", d->name);
- return -ENODEV;
- }
- pci_set_master(dev);
- if (pci_set_dma_mask(dev, DMA_32BIT_MASK)) {
- printk(KERN_WARNING "%s: No suitable DMA available.\n",
- d->name);
- return -ENODEV;
- }
-
- /*
- * Now the chipset is configured we can let the core
- * do all the device setup for us
- */
-
- ide_pci_setup_ports(dev, d, 14, &hw[0], &hws[0]);
-
- return ide_host_add(d, hws, NULL);
-}
-
-static const struct pci_device_id cs5520_pci_tbl[] = {
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5510), 0 },
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5520), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cs5520_pci_tbl);
-
-static struct pci_driver cs5520_pci_driver = {
- .name = "Cyrix_IDE",
- .id_table = cs5520_pci_tbl,
- .probe = cs5520_init_one,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cs5520_ide_init(void)
-{
- return ide_pci_register_driver(&cs5520_pci_driver);
-}
-
-module_init(cs5520_ide_init);
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for Cyrix 5510/5520 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cs5530.c b/drivers/ide/pci/cs5530.c
deleted file mode 100644
index 53f079cc00af..000000000000
--- a/drivers/ide/pci/cs5530.c
+++ /dev/null
@@ -1,294 +0,0 @@
-/*
- * Copyright (C) 2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2000 Mark Lord <mlord@pobox.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Development of this chipset driver was funded
- * by the nice folks at National Semiconductor.
- *
- * Documentation:
- * CS5530 documentation available from National Semiconductor.
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cs5530"
-
-/*
- * Here are the standard PIO mode 0-4 timings for each "format".
- * Format-0 uses fast data reg timings, with slower command reg timings.
- * Format-1 uses fast timings for all registers, but won't work with all drives.
- */
-static unsigned int cs5530_pio_timings[2][5] = {
- {0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010},
- {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}
-};
-
-/*
- * After chip reset, the PIO timings are set to 0x0000e132, which is not valid.
- */
-#define CS5530_BAD_PIO(timings) (((timings)&~0x80000000)==0x0000e132)
-#define CS5530_BASEREG(hwif) (((hwif)->dma_base & ~0xf) + ((hwif)->channel ? 0x30 : 0x20))
-
-/**
- * cs5530_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Handles setting of PIO mode for the chipset.
- *
- * The init_hwif_cs5530() routine guarantees that all drives
- * will have valid default PIO timings set up before we get here.
- */
-
-static void cs5530_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- unsigned long basereg = CS5530_BASEREG(drive->hwif);
- unsigned int format = (inl(basereg + 4) >> 31) & 1;
-
- outl(cs5530_pio_timings[format][pio], basereg + ((drive->dn & 1)<<3));
-}
-
-/**
- * cs5530_udma_filter - UDMA filter
- * @drive: drive
- *
- * cs5530_udma_filter() does UDMA mask filtering for the given drive
- * taking into the consideration capabilities of the mate device.
- *
- * The CS5530 specifies that two drives sharing a cable cannot mix
- * UDMA/MDMA. It has to be one or the other, for the pair, though
- * different timings can still be chosen for each drive. We could
- * set the appropriate timing bits on the fly, but that might be
- * a bit confusing. So, for now we statically handle this requirement
- * by looking at our mate drive to see what it is capable of, before
- * choosing a mode for our own drive.
- *
- * Note: This relies on the fact we never fail from UDMA to MWDMA2
- * but instead drop to PIO.
- */
-
-static u8 cs5530_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid = mate->id;
- u8 mask = hwif->ultra_mask;
-
- if (mate == NULL)
- goto out;
-
- if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
- if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
- (mateid[ATA_ID_UDMA_MODES] & 7))
- goto out;
- if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
- (mateid[ATA_ID_MWDMA_MODES] & 7))
- mask = 0;
- }
-out:
- return mask;
-}
-
-static void cs5530_set_dma_mode(ide_drive_t *drive, const u8 mode)
-{
- unsigned long basereg;
- unsigned int reg, timings = 0;
-
- switch (mode) {
- case XFER_UDMA_0: timings = 0x00921250; break;
- case XFER_UDMA_1: timings = 0x00911140; break;
- case XFER_UDMA_2: timings = 0x00911030; break;
- case XFER_MW_DMA_0: timings = 0x00077771; break;
- case XFER_MW_DMA_1: timings = 0x00012121; break;
- case XFER_MW_DMA_2: timings = 0x00002020; break;
- }
- basereg = CS5530_BASEREG(drive->hwif);
- reg = inl(basereg + 4); /* get drive0 config register */
- timings |= reg & 0x80000000; /* preserve PIO format bit */
- if ((drive-> dn & 1) == 0) { /* are we configuring drive0? */
- outl(timings, basereg + 4); /* write drive0 config register */
- } else {
- if (timings & 0x00100000)
- reg |= 0x00100000; /* enable UDMA timings for both drives */
- else
- reg &= ~0x00100000; /* disable UDMA timings for both drives */
- outl(reg, basereg + 4); /* write drive0 config register */
- outl(timings, basereg + 12); /* write drive1 config register */
- }
-}
-
-/**
- * init_chipset_5530 - set up 5530 bridge
- * @dev: PCI device
- *
- * Initialize the cs5530 bridge for reliable IDE DMA operation.
- */
-
-static unsigned int init_chipset_cs5530(struct pci_dev *dev)
-{
- struct pci_dev *master_0 = NULL, *cs5530_0 = NULL;
-
- if (pci_resource_start(dev, 4) == 0)
- return -EFAULT;
-
- dev = NULL;
- while ((dev = pci_get_device(PCI_VENDOR_ID_CYRIX, PCI_ANY_ID, dev)) != NULL) {
- switch (dev->device) {
- case PCI_DEVICE_ID_CYRIX_PCI_MASTER:
- master_0 = pci_dev_get(dev);
- break;
- case PCI_DEVICE_ID_CYRIX_5530_LEGACY:
- cs5530_0 = pci_dev_get(dev);
- break;
- }
- }
- if (!master_0) {
- printk(KERN_ERR DRV_NAME ": unable to locate PCI MASTER function\n");
- goto out;
- }
- if (!cs5530_0) {
- printk(KERN_ERR DRV_NAME ": unable to locate CS5530 LEGACY function\n");
- goto out;
- }
-
- /*
- * Enable BusMaster and MemoryWriteAndInvalidate for the cs5530:
- * --> OR 0x14 into 16-bit PCI COMMAND reg of function 0 of the cs5530
- */
-
- pci_set_master(cs5530_0);
- pci_try_set_mwi(cs5530_0);
-
- /*
- * Set PCI CacheLineSize to 16-bytes:
- * --> Write 0x04 into 8-bit PCI CACHELINESIZE reg of function 0 of the cs5530
- */
-
- pci_write_config_byte(cs5530_0, PCI_CACHE_LINE_SIZE, 0x04);
-
- /*
- * Disable trapping of UDMA register accesses (Win98 hack):
- * --> Write 0x5006 into 16-bit reg at offset 0xd0 of function 0 of the cs5530
- */
-
- pci_write_config_word(cs5530_0, 0xd0, 0x5006);
-
- /*
- * Bit-1 at 0x40 enables MemoryWriteAndInvalidate on internal X-bus:
- * The other settings are what is necessary to get the register
- * into a sane state for IDE DMA operation.
- */
-
- pci_write_config_byte(master_0, 0x40, 0x1e);
-
- /*
- * Set max PCI burst size (16-bytes seems to work best):
- * 16bytes: set bit-1 at 0x41 (reg value of 0x16)
- * all others: clear bit-1 at 0x41, and do:
- * 128bytes: OR 0x00 at 0x41
- * 256bytes: OR 0x04 at 0x41
- * 512bytes: OR 0x08 at 0x41
- * 1024bytes: OR 0x0c at 0x41
- */
-
- pci_write_config_byte(master_0, 0x41, 0x14);
-
- /*
- * These settings are necessary to get the chip
- * into a sane state for IDE DMA operation.
- */
-
- pci_write_config_byte(master_0, 0x42, 0x00);
- pci_write_config_byte(master_0, 0x43, 0xc1);
-
-out:
- pci_dev_put(master_0);
- pci_dev_put(cs5530_0);
- return 0;
-}
-
-/**
- * init_hwif_cs5530 - initialise an IDE channel
- * @hwif: IDE to initialize
- *
- * This gets invoked by the IDE driver once for each channel. It
- * performs channel-specific pre-initialization before drive probing.
- */
-
-static void __devinit init_hwif_cs5530 (ide_hwif_t *hwif)
-{
- unsigned long basereg;
- u32 d0_timings;
-
- basereg = CS5530_BASEREG(hwif);
- d0_timings = inl(basereg + 0);
- if (CS5530_BAD_PIO(d0_timings))
- outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 0);
- if (CS5530_BAD_PIO(inl(basereg + 8)))
- outl(cs5530_pio_timings[(d0_timings >> 31) & 1][0], basereg + 8);
-}
-
-static const struct ide_port_ops cs5530_port_ops = {
- .set_pio_mode = cs5530_set_pio_mode,
- .set_dma_mode = cs5530_set_dma_mode,
- .udma_filter = cs5530_udma_filter,
-};
-
-static const struct ide_port_info cs5530_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_cs5530,
- .init_hwif = init_hwif_cs5530,
- .port_ops = &cs5530_port_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_POST_SET_MODE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
-};
-
-static int __devinit cs5530_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &cs5530_chipset, NULL);
-}
-
-static const struct pci_device_id cs5530_pci_tbl[] = {
- { PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_IDE), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cs5530_pci_tbl);
-
-static struct pci_driver cs5530_pci_driver = {
- .name = "CS5530 IDE",
- .id_table = cs5530_pci_tbl,
- .probe = cs5530_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cs5530_ide_init(void)
-{
- return ide_pci_register_driver(&cs5530_pci_driver);
-}
-
-static void __exit cs5530_ide_exit(void)
-{
- pci_unregister_driver(&cs5530_pci_driver);
-}
-
-module_init(cs5530_ide_init);
-module_exit(cs5530_ide_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for Cyrix/NS 5530 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cs5535.c b/drivers/ide/pci/cs5535.c
deleted file mode 100644
index 983d957a0189..000000000000
--- a/drivers/ide/pci/cs5535.c
+++ /dev/null
@@ -1,219 +0,0 @@
-/*
- * Copyright (C) 2004-2005 Advanced Micro Devices, Inc.
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * History:
- * 09/20/2005 - Jaya Kumar <jayakumar.ide@gmail.com>
- * - Reworked tuneproc, set_drive, misc mods to prep for mainline
- * - Work was sponsored by CIS (M) Sdn Bhd.
- * Ported to Kernel 2.6.11 on June 26, 2005 by
- * Wolfgang Zuleger <wolfgang.zuleger@gmx.de>
- * Alexander Kiausch <alex.kiausch@t-online.de>
- * Originally developed by AMD for 2.4/2.6
- *
- * Development of this chipset driver was funded
- * by the nice folks at National Semiconductor/AMD.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- *
- * Documentation:
- * CS5535 documentation available from AMD
- */
-
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "cs5535"
-
-#define MSR_ATAC_BASE 0x51300000
-#define ATAC_GLD_MSR_CAP (MSR_ATAC_BASE+0)
-#define ATAC_GLD_MSR_CONFIG (MSR_ATAC_BASE+0x01)
-#define ATAC_GLD_MSR_SMI (MSR_ATAC_BASE+0x02)
-#define ATAC_GLD_MSR_ERROR (MSR_ATAC_BASE+0x03)
-#define ATAC_GLD_MSR_PM (MSR_ATAC_BASE+0x04)
-#define ATAC_GLD_MSR_DIAG (MSR_ATAC_BASE+0x05)
-#define ATAC_IO_BAR (MSR_ATAC_BASE+0x08)
-#define ATAC_RESET (MSR_ATAC_BASE+0x10)
-#define ATAC_CH0D0_PIO (MSR_ATAC_BASE+0x20)
-#define ATAC_CH0D0_DMA (MSR_ATAC_BASE+0x21)
-#define ATAC_CH0D1_PIO (MSR_ATAC_BASE+0x22)
-#define ATAC_CH0D1_DMA (MSR_ATAC_BASE+0x23)
-#define ATAC_PCI_ABRTERR (MSR_ATAC_BASE+0x24)
-#define ATAC_BM0_CMD_PRIM 0x00
-#define ATAC_BM0_STS_PRIM 0x02
-#define ATAC_BM0_PRD 0x04
-#define CS5535_CABLE_DETECT 0x48
-
-/* Format I PIO settings. We separate out cmd and data for safer timings */
-
-static unsigned int cs5535_pio_cmd_timings[5] =
-{ 0xF7F4, 0x53F3, 0x13F1, 0x5131, 0x1131 };
-static unsigned int cs5535_pio_dta_timings[5] =
-{ 0xF7F4, 0xF173, 0x8141, 0x5131, 0x1131 };
-
-static unsigned int cs5535_mwdma_timings[3] =
-{ 0x7F0FFFF3, 0x7F035352, 0x7f024241 };
-
-static unsigned int cs5535_udma_timings[5] =
-{ 0x7F7436A1, 0x7F733481, 0x7F723261, 0x7F713161, 0x7F703061 };
-
-/* Macros to check if the register is the reset value - reset value is an
- invalid timing and indicates the register has not been set previously */
-
-#define CS5535_BAD_PIO(timings) ( (timings&~0x80000000UL) == 0x00009172 )
-#define CS5535_BAD_DMA(timings) ( (timings & 0x000FFFFF) == 0x00077771 )
-
-/****
- * cs5535_set_speed - Configure the chipset to the new speed
- * @drive: Drive to set up
- * @speed: desired speed
- *
- * cs5535_set_speed() configures the chipset to a new speed.
- */
-static void cs5535_set_speed(ide_drive_t *drive, const u8 speed)
-{
- u32 reg = 0, dummy;
- u8 unit = drive->dn & 1;
-
- /* Set the PIO timings */
- if (speed < XFER_SW_DMA_0) {
- ide_drive_t *pair = ide_get_pair_dev(drive);
- u8 cmd, pioa;
-
- cmd = pioa = speed - XFER_PIO_0;
-
- if (pair) {
- u8 piob = ide_get_best_pio_mode(pair, 255, 4);
-
- if (piob < cmd)
- cmd = piob;
- }
-
- /* Write the speed of the current drive */
- reg = (cs5535_pio_cmd_timings[cmd] << 16) |
- cs5535_pio_dta_timings[pioa];
- wrmsr(unit ? ATAC_CH0D1_PIO : ATAC_CH0D0_PIO, reg, 0);
-
- /* And if nessesary - change the speed of the other drive */
- rdmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, dummy);
-
- if (((reg >> 16) & cs5535_pio_cmd_timings[cmd]) !=
- cs5535_pio_cmd_timings[cmd]) {
- reg &= 0x0000FFFF;
- reg |= cs5535_pio_cmd_timings[cmd] << 16;
- wrmsr(unit ? ATAC_CH0D0_PIO : ATAC_CH0D1_PIO, reg, 0);
- }
-
- /* Set bit 31 of the DMA register for PIO format 1 timings */
- rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
- wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA,
- reg | 0x80000000UL, 0);
- } else {
- rdmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, dummy);
-
- reg &= 0x80000000UL; /* Preserve the PIO format bit */
-
- if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_4)
- reg |= cs5535_udma_timings[speed - XFER_UDMA_0];
- else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- reg |= cs5535_mwdma_timings[speed - XFER_MW_DMA_0];
- else
- return;
-
- wrmsr(unit ? ATAC_CH0D1_DMA : ATAC_CH0D0_DMA, reg, 0);
- }
-}
-
-/**
- * cs5535_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Programs the chipset for DMA mode.
- */
-
-static void cs5535_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- cs5535_set_speed(drive, speed);
-}
-
-/**
- * cs5535_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * A callback from the upper layers for PIO-only tuning.
- */
-
-static void cs5535_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- cs5535_set_speed(drive, XFER_PIO_0 + pio);
-}
-
-static u8 cs5535_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 bit;
-
- /* if a 80 wire cable was detected */
- pci_read_config_byte(dev, CS5535_CABLE_DETECT, &bit);
-
- return (bit & 1) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops cs5535_port_ops = {
- .set_pio_mode = cs5535_set_pio_mode,
- .set_dma_mode = cs5535_set_dma_mode,
- .cable_detect = cs5535_cable_detect,
-};
-
-static const struct ide_port_info cs5535_chipset __devinitdata = {
- .name = DRV_NAME,
- .port_ops = &cs5535_port_ops,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_POST_SET_MODE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
-};
-
-static int __devinit cs5535_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &cs5535_chipset, NULL);
-}
-
-static const struct pci_device_id cs5535_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_CS5535_IDE), 0 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, cs5535_pci_tbl);
-
-static struct pci_driver cs5535_pci_driver = {
- .name = "CS5535_IDE",
- .id_table = cs5535_pci_tbl,
- .probe = cs5535_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cs5535_ide_init(void)
-{
- return ide_pci_register_driver(&cs5535_pci_driver);
-}
-
-static void __exit cs5535_ide_exit(void)
-{
- pci_unregister_driver(&cs5535_pci_driver);
-}
-
-module_init(cs5535_ide_init);
-module_exit(cs5535_ide_exit);
-
-MODULE_AUTHOR("AMD");
-MODULE_DESCRIPTION("PCI driver module for AMD/NS CS5535 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/cy82c693.c b/drivers/ide/pci/cy82c693.c
deleted file mode 100644
index 5297f07d2933..000000000000
--- a/drivers/ide/pci/cy82c693.c
+++ /dev/null
@@ -1,358 +0,0 @@
-/*
- * Copyright (C) 1998-2000 Andreas S. Krebs (akrebs@altavista.net), Maintainer
- * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>, Integrator
- *
- * CYPRESS CY82C693 chipset IDE controller
- *
- * The CY82C693 chipset is used on Digital's PC-Alpha 164SX boards.
- * Writing the driver was quite simple, since most of the job is
- * done by the generic pci-ide support.
- * The hard part was finding the CY82C693's datasheet on Cypress's
- * web page :-(. But Altavista solved this problem :-).
- *
- *
- * Notes:
- * - I recently got a 16.8G IBM DTTA, so I was able to test it with
- * a large and fast disk - the results look great, so I'd say the
- * driver is working fine :-)
- * hdparm -t reports 8.17 MB/sec at about 6% CPU usage for the DTTA
- * - this is my first linux driver, so there's probably a lot of room
- * for optimizations and bug fixing, so feel free to do it.
- * - if using PIO mode it's a good idea to set the PIO mode and
- * 32-bit I/O support (if possible), e.g. hdparm -p2 -c1 /dev/hda
- * - I had some problems with my IBM DHEA with PIO modes < 2
- * (lost interrupts) ?????
- * - first tests with DMA look okay, they seem to work, but there is a
- * problem with sound - the BusMaster IDE TimeOut should fixed this
- *
- * Ancient History:
- * AMH@1999-08-24: v0.34 init_cy82c693_chip moved to pci_init_cy82c693
- * ASK@1999-01-23: v0.33 made a few minor code clean ups
- * removed DMA clock speed setting by default
- * added boot message
- * ASK@1998-11-01: v0.32 added support to set BusMaster IDE TimeOut
- * added support to set DMA Controller Clock Speed
- * ASK@1998-10-31: v0.31 fixed problem with setting to high DMA modes
- * on some drives.
- * ASK@1998-10-29: v0.3 added support to set DMA modes
- * ASK@1998-10-28: v0.2 added support to set PIO modes
- * ASK@1998-10-27: v0.1 first version - chipset detection
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "cy82c693"
-
-/*
- * The following are used to debug the driver.
- */
-#define CY82C693_DEBUG_INFO 0
-
-/*
- * NOTE: the value for busmaster timeout is tricky and I got it by
- * trial and error! By using a to low value will cause DMA timeouts
- * and drop IDE performance, and by using a to high value will cause
- * audio playback to scatter.
- * If you know a better value or how to calc it, please let me know.
- */
-
-/* twice the value written in cy82c693ub datasheet */
-#define BUSMASTER_TIMEOUT 0x50
-/*
- * the value above was tested on my machine and it seems to work okay
- */
-
-/* here are the offset definitions for the registers */
-#define CY82_IDE_CMDREG 0x04
-#define CY82_IDE_ADDRSETUP 0x48
-#define CY82_IDE_MASTER_IOR 0x4C
-#define CY82_IDE_MASTER_IOW 0x4D
-#define CY82_IDE_SLAVE_IOR 0x4E
-#define CY82_IDE_SLAVE_IOW 0x4F
-#define CY82_IDE_MASTER_8BIT 0x50
-#define CY82_IDE_SLAVE_8BIT 0x51
-
-#define CY82_INDEX_PORT 0x22
-#define CY82_DATA_PORT 0x23
-
-#define CY82_INDEX_CHANNEL0 0x30
-#define CY82_INDEX_CHANNEL1 0x31
-#define CY82_INDEX_TIMEOUT 0x32
-
-/* the min and max PCI bus speed in MHz - from datasheet */
-#define CY82C963_MIN_BUS_SPEED 25
-#define CY82C963_MAX_BUS_SPEED 33
-
-/* the struct for the PIO mode timings */
-typedef struct pio_clocks_s {
- u8 address_time; /* Address setup (clocks) */
- u8 time_16r; /* clocks for 16bit IOR (0xF0=Active/data, 0x0F=Recovery) */
- u8 time_16w; /* clocks for 16bit IOW (0xF0=Active/data, 0x0F=Recovery) */
- u8 time_8; /* clocks for 8bit (0xF0=Active/data, 0x0F=Recovery) */
-} pio_clocks_t;
-
-/*
- * calc clocks using bus_speed
- * returns (rounded up) time in bus clocks for time in ns
- */
-static int calc_clk(int time, int bus_speed)
-{
- int clocks;
-
- clocks = (time*bus_speed+999)/1000 - 1;
-
- if (clocks < 0)
- clocks = 0;
-
- if (clocks > 0x0F)
- clocks = 0x0F;
-
- return clocks;
-}
-
-/*
- * compute the values for the clock registers for PIO
- * mode and pci_clk [MHz] speed
- *
- * NOTE: for mode 0,1 and 2 drives 8-bit IDE command control registers are used
- * for mode 3 and 4 drives 8 and 16-bit timings are the same
- *
- */
-static void compute_clocks(u8 pio, pio_clocks_t *p_pclk)
-{
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- int clk1, clk2;
- int bus_speed = ide_pci_clk ? ide_pci_clk : 33;
-
- /* we don't check against CY82C693's min and max speed,
- * so you can play with the idebus=xx parameter
- */
-
- /* let's calc the address setup time clocks */
- p_pclk->address_time = (u8)calc_clk(t->setup, bus_speed);
-
- /* let's calc the active and recovery time clocks */
- clk1 = calc_clk(t->active, bus_speed);
-
- /* calc recovery timing */
- clk2 = t->cycle - t->active - t->setup;
-
- clk2 = calc_clk(clk2, bus_speed);
-
- clk1 = (clk1<<4)|clk2; /* combine active and recovery clocks */
-
- /* note: we use the same values for 16bit IOR and IOW
- * those are all the same, since I don't have other
- * timings than those from ide-lib.c
- */
-
- p_pclk->time_16r = (u8)clk1;
- p_pclk->time_16w = (u8)clk1;
-
- /* what are good values for 8bit ?? */
- p_pclk->time_8 = (u8)clk1;
-}
-
-/*
- * set DMA mode a specific channel for CY82C693
- */
-
-static void cy82c693_set_dma_mode(ide_drive_t *drive, const u8 mode)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 single = (mode & 0x10) >> 4, index = 0, data = 0;
-
- index = hwif->channel ? CY82_INDEX_CHANNEL1 : CY82_INDEX_CHANNEL0;
-
- data = (mode & 3) | (single << 2);
-
- outb(index, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s (ch=%d, dev=%d): set DMA mode to %d (single=%d)\n",
- drive->name, hwif->channel, drive->dn & 1, mode & 3, single);
-#endif /* CY82C693_DEBUG_INFO */
-
- /*
- * note: below we set the value for Bus Master IDE TimeOut Register
- * I'm not absolutly sure what this does, but it solved my problem
- * with IDE DMA and sound, so I now can play sound and work with
- * my IDE driver at the same time :-)
- *
- * If you know the correct (best) value for this register please
- * let me know - ASK
- */
-
- data = BUSMASTER_TIMEOUT;
- outb(CY82_INDEX_TIMEOUT, CY82_INDEX_PORT);
- outb(data, CY82_DATA_PORT);
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s: Set IDE Bus Master TimeOut Register to 0x%X\n",
- drive->name, data);
-#endif /* CY82C693_DEBUG_INFO */
-}
-
-static void cy82c693_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- pio_clocks_t pclk;
- unsigned int addrCtrl;
-
- /* select primary or secondary channel */
- if (hwif->index > 0) { /* drive is on the secondary channel */
- dev = pci_get_slot(dev->bus, dev->devfn+1);
- if (!dev) {
- printk(KERN_ERR "%s: tune_drive: "
- "Cannot find secondary interface!\n",
- drive->name);
- return;
- }
- }
-
- /* let's calc the values for this PIO mode */
- compute_clocks(pio, &pclk);
-
- /* now let's write the clocks registers */
- if ((drive->dn & 1) == 0) {
- /*
- * set master drive
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= (~0xF);
- addrCtrl |= (unsigned int)pclk.address_time;
- pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
- /* now let's set the remaining registers */
- pci_write_config_byte(dev, CY82_IDE_MASTER_IOR, pclk.time_16r);
- pci_write_config_byte(dev, CY82_IDE_MASTER_IOW, pclk.time_16w);
- pci_write_config_byte(dev, CY82_IDE_MASTER_8BIT, pclk.time_8);
-
- addrCtrl &= 0xF;
- } else {
- /*
- * set slave drive
- * address setup control register
- * is 32 bit !!!
- */
- pci_read_config_dword(dev, CY82_IDE_ADDRSETUP, &addrCtrl);
-
- addrCtrl &= (~0xF0);
- addrCtrl |= ((unsigned int)pclk.address_time<<4);
- pci_write_config_dword(dev, CY82_IDE_ADDRSETUP, addrCtrl);
-
- /* now let's set the remaining registers */
- pci_write_config_byte(dev, CY82_IDE_SLAVE_IOR, pclk.time_16r);
- pci_write_config_byte(dev, CY82_IDE_SLAVE_IOW, pclk.time_16w);
- pci_write_config_byte(dev, CY82_IDE_SLAVE_8BIT, pclk.time_8);
-
- addrCtrl >>= 4;
- addrCtrl &= 0xF;
- }
-
-#if CY82C693_DEBUG_INFO
- printk(KERN_INFO "%s (ch=%d, dev=%d): set PIO timing to "
- "(addr=0x%X, ior=0x%X, iow=0x%X, 8bit=0x%X)\n",
- drive->name, hwif->channel, drive->dn & 1,
- addrCtrl, pclk.time_16r, pclk.time_16w, pclk.time_8);
-#endif /* CY82C693_DEBUG_INFO */
-}
-
-static void __devinit init_iops_cy82c693(ide_hwif_t *hwif)
-{
- static ide_hwif_t *primary;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (PCI_FUNC(dev->devfn) == 1)
- primary = hwif;
- else {
- hwif->mate = primary;
- hwif->channel = 1;
- }
-}
-
-static const struct ide_port_ops cy82c693_port_ops = {
- .set_pio_mode = cy82c693_set_pio_mode,
- .set_dma_mode = cy82c693_set_dma_mode,
-};
-
-static const struct ide_port_info cy82c693_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_iops = init_iops_cy82c693,
- .port_ops = &cy82c693_port_ops,
- .chipset = ide_cy82c693,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int __devinit cy82c693_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct pci_dev *dev2;
- int ret = -ENODEV;
-
- /* CY82C693 is more than only a IDE controller.
- Function 1 is primary IDE channel, function 2 - secondary. */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE &&
- PCI_FUNC(dev->devfn) == 1) {
- dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
- ret = ide_pci_init_two(dev, dev2, &cy82c693_chipset, NULL);
- if (ret)
- pci_dev_put(dev2);
- }
- return ret;
-}
-
-static void __devexit cy82c693_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
- ide_pci_remove(dev);
- pci_dev_put(dev2);
-}
-
-static const struct pci_device_id cy82c693_pci_tbl[] = {
- { PCI_VDEVICE(CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, cy82c693_pci_tbl);
-
-static struct pci_driver cy82c693_pci_driver = {
- .name = "Cypress_IDE",
- .id_table = cy82c693_pci_tbl,
- .probe = cy82c693_init_one,
- .remove = __devexit_p(cy82c693_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init cy82c693_ide_init(void)
-{
- return ide_pci_register_driver(&cy82c693_pci_driver);
-}
-
-static void __exit cy82c693_ide_exit(void)
-{
- pci_unregister_driver(&cy82c693_pci_driver);
-}
-
-module_init(cy82c693_ide_init);
-module_exit(cy82c693_ide_exit);
-
-MODULE_AUTHOR("Andreas Krebs, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for the Cypress CY82C693 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/delkin_cb.c b/drivers/ide/pci/delkin_cb.c
deleted file mode 100644
index 8f1b2d9f0513..000000000000
--- a/drivers/ide/pci/delkin_cb.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- * Created 20 Oct 2004 by Mark Lord
- *
- * Basic support for Delkin/ASKA/Workbit Cardbus CompactFlash adapter
- *
- * Modeled after the 16-bit PCMCIA driver: ide-cs.c
- *
- * This is slightly peculiar, in that it is a PCI driver,
- * but is NOT an IDE PCI driver -- the IDE layer does not directly
- * support hot insertion/removal of PCI interfaces, so this driver
- * is unable to use the IDE PCI interfaces. Instead, it uses the
- * same interfaces as the ide-cs (PCMCIA) driver uses.
- * On the plus side, the driver is also smaller/simpler this way.
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file COPYING in the main directory of this archive for
- * more details.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-
-#include <asm/io.h>
-
-/*
- * No chip documentation has yet been found,
- * so these configuration values were pulled from
- * a running Win98 system using "debug".
- * This gives around 3MByte/second read performance,
- * which is about 2/3 of what the chip is capable of.
- *
- * There is also a 4KByte mmio region on the card,
- * but its purpose has yet to be reverse-engineered.
- */
-static const u8 setup[] = {
- 0x00, 0x05, 0xbe, 0x01, 0x20, 0x8f, 0x00, 0x00,
- 0xa4, 0x1f, 0xb3, 0x1b, 0x00, 0x00, 0x00, 0x80,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0xa4, 0x83, 0x02, 0x13,
-};
-
-static const struct ide_port_ops delkin_cb_port_ops = {
- .quirkproc = ide_undecoded_slave,
-};
-
-static unsigned int delkin_cb_init_chipset(struct pci_dev *dev)
-{
- unsigned long base = pci_resource_start(dev, 0);
- int i;
-
- outb(0x02, base + 0x1e); /* set nIEN to block interrupts */
- inb(base + 0x17); /* read status to clear interrupts */
-
- for (i = 0; i < sizeof(setup); ++i) {
- if (setup[i])
- outb(setup[i], base + i);
- }
-
- return 0;
-}
-
-static const struct ide_port_info delkin_cb_port_info = {
- .port_ops = &delkin_cb_port_ops,
- .host_flags = IDE_HFLAG_IO_32BIT | IDE_HFLAG_UNMASK_IRQS |
- IDE_HFLAG_NO_DMA,
- .init_chipset = delkin_cb_init_chipset,
-};
-
-static int __devinit
-delkin_cb_probe (struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_host *host;
- unsigned long base;
- int rc;
- hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
-
- rc = pci_enable_device(dev);
- if (rc) {
- printk(KERN_ERR "delkin_cb: pci_enable_device failed (%d)\n", rc);
- return rc;
- }
- rc = pci_request_regions(dev, "delkin_cb");
- if (rc) {
- printk(KERN_ERR "delkin_cb: pci_request_regions failed (%d)\n", rc);
- pci_disable_device(dev);
- return rc;
- }
- base = pci_resource_start(dev, 0);
-
- delkin_cb_init_chipset(dev);
-
- memset(&hw, 0, sizeof(hw));
- ide_std_init_ports(&hw, base + 0x10, base + 0x1e);
- hw.irq = dev->irq;
- hw.dev = &dev->dev;
- hw.chipset = ide_pci; /* this enables IRQ sharing */
-
- rc = ide_host_add(&delkin_cb_port_info, hws, &host);
- if (rc)
- goto out_disable;
-
- pci_set_drvdata(dev, host);
-
- return 0;
-
-out_disable:
- pci_release_regions(dev);
- pci_disable_device(dev);
- return rc;
-}
-
-static void
-delkin_cb_remove (struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- ide_host_remove(host);
-
- pci_release_regions(dev);
- pci_disable_device(dev);
-}
-
-#ifdef CONFIG_PM
-static int delkin_cb_suspend(struct pci_dev *dev, pm_message_t state)
-{
- pci_save_state(dev);
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
-
- return 0;
-}
-
-static int delkin_cb_resume(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- int rc;
-
- pci_set_power_state(dev, PCI_D0);
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- pci_restore_state(dev);
- pci_set_master(dev);
-
- if (host->init_chipset)
- host->init_chipset(dev);
-
- return 0;
-}
-#else
-#define delkin_cb_suspend NULL
-#define delkin_cb_resume NULL
-#endif
-
-static struct pci_device_id delkin_cb_pci_tbl[] __devinitdata = {
- { 0x1145, 0xf021, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { 0x1145, 0xf024, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0},
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, delkin_cb_pci_tbl);
-
-static struct pci_driver delkin_cb_pci_driver = {
- .name = "Delkin-ASKA-Workbit Cardbus IDE",
- .id_table = delkin_cb_pci_tbl,
- .probe = delkin_cb_probe,
- .remove = delkin_cb_remove,
- .suspend = delkin_cb_suspend,
- .resume = delkin_cb_resume,
-};
-
-static int __init delkin_cb_init(void)
-{
- return pci_register_driver(&delkin_cb_pci_driver);
-}
-
-static void __exit delkin_cb_exit(void)
-{
- pci_unregister_driver(&delkin_cb_pci_driver);
-}
-
-module_init(delkin_cb_init);
-module_exit(delkin_cb_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("Basic support for Delkin/ASKA/Workbit Cardbus IDE");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c
deleted file mode 100644
index 474f96a7c076..000000000000
--- a/drivers/ide/pci/generic.c
+++ /dev/null
@@ -1,193 +0,0 @@
-/*
- * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
- * Portions (C) Copyright 2002 Red Hat Inc <alan@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * For the avoidance of doubt the "preferred form" of this code is one which
- * is in an open non patent encumbered format. Where cryptographic key signing
- * forms part of the process of creating an executable the information
- * including keys needed to generate an equivalently functional executable
- * are deemed to be part of the source code.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "ide_pci_generic"
-
-static int ide_generic_all; /* Set to claim all devices */
-
-module_param_named(all_generic_ide, ide_generic_all, bool, 0444);
-MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers.");
-
-#define IDE_HFLAGS_UMC (IDE_HFLAG_NO_DMA | IDE_HFLAG_FORCE_LEGACY_IRQS)
-
-#define DECLARE_GENERIC_PCI_DEV(extra_flags) \
- { \
- .name = DRV_NAME, \
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA | \
- extra_flags, \
- .swdma_mask = ATA_SWDMA2, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = ATA_UDMA6, \
- }
-
-static const struct ide_port_info generic_chipsets[] __devinitdata = {
- /* 0: Unknown */
- DECLARE_GENERIC_PCI_DEV(0),
-
- { /* 1: NS87410 */
- .name = DRV_NAME,
- .enablebits = { {0x43, 0x08, 0x08}, {0x47, 0x08, 0x08} },
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
- },
-
- /* 2: SAMURAI / HT6565 / HINT_IDE */
- DECLARE_GENERIC_PCI_DEV(0),
- /* 3: UM8673F / UM8886A / UM8886BF */
- DECLARE_GENERIC_PCI_DEV(IDE_HFLAGS_UMC),
- /* 4: VIA_IDE / OPTI621V / Piccolo010{2,3,5} */
- DECLARE_GENERIC_PCI_DEV(IDE_HFLAG_NO_AUTODMA),
-
- { /* 5: VIA8237SATA */
- .name = DRV_NAME,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
- IDE_HFLAG_OFF_BOARD,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
- },
-
- { /* 6: Revolution */
- .name = DRV_NAME,
- .host_flags = IDE_HFLAG_CLEAR_SIMPLEX |
- IDE_HFLAG_TRUST_BIOS_FOR_DMA |
- IDE_HFLAG_OFF_BOARD,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
- }
-};
-
-/**
- * generic_init_one - called when a PIIX is found
- * @dev: the generic device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int __devinit generic_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d = &generic_chipsets[id->driver_data];
- int ret = -ENODEV;
-
- /* Don't use the generic entry unless instructed to do so */
- if (id->driver_data == 0 && ide_generic_all == 0)
- goto out;
-
- switch (dev->vendor) {
- case PCI_VENDOR_ID_UMC:
- if (dev->device == PCI_DEVICE_ID_UMC_UM8886A &&
- !(PCI_FUNC(dev->devfn) & 1))
- goto out; /* UM8886A/BF pair */
- break;
- case PCI_VENDOR_ID_OPTI:
- if (dev->device == PCI_DEVICE_ID_OPTI_82C558 &&
- !(PCI_FUNC(dev->devfn) & 1))
- goto out;
- break;
- case PCI_VENDOR_ID_JMICRON:
- if (dev->device != PCI_DEVICE_ID_JMICRON_JMB368 &&
- PCI_FUNC(dev->devfn) != 1)
- goto out;
- break;
- case PCI_VENDOR_ID_NS:
- if (dev->device == PCI_DEVICE_ID_NS_87410 &&
- (dev->class >> 8) != PCI_CLASS_STORAGE_IDE)
- goto out;
- break;
- }
-
- if (dev->vendor != PCI_VENDOR_ID_JMICRON) {
- u16 command;
- pci_read_config_word(dev, PCI_COMMAND, &command);
- if (!(command & PCI_COMMAND_IO)) {
- printk(KERN_INFO "%s %s: skipping disabled "
- "controller\n", d->name, pci_name(dev));
- goto out;
- }
- }
- ret = ide_pci_init_one(dev, d, NULL);
-out:
- return ret;
-}
-
-static const struct pci_device_id generic_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87410), 1 },
- { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_SAMURAI_IDE), 2 },
- { PCI_VDEVICE(HOLTEK, PCI_DEVICE_ID_HOLTEK_6565), 2 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8673F), 3 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886A), 3 },
- { PCI_VDEVICE(UMC, PCI_DEVICE_ID_UMC_UM8886BF), 3 },
- { PCI_VDEVICE(HINT, PCI_DEVICE_ID_HINT_VXPROII_IDE), 2 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C561), 4 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C558), 4 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_8237_SATA), 5 },
-#endif
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO), 4 },
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_1), 4 },
- { PCI_VDEVICE(TOSHIBA, PCI_DEVICE_ID_TOSHIBA_PICCOLO_2), 4 },
- { PCI_VDEVICE(NETCELL, PCI_DEVICE_ID_REVOLUTION), 6 },
- /*
- * Must come last. If you add entries adjust
- * this table and generic_chipsets[] appropriately.
- */
- { PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID, PCI_CLASS_STORAGE_IDE << 8, 0xFFFFFF00UL, 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, generic_pci_tbl);
-
-static struct pci_driver generic_pci_driver = {
- .name = "PCI_IDE",
- .id_table = generic_pci_tbl,
- .probe = generic_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init generic_ide_init(void)
-{
- return ide_pci_register_driver(&generic_pci_driver);
-}
-
-static void __exit generic_ide_exit(void)
-{
- pci_unregister_driver(&generic_pci_driver);
-}
-
-module_init(generic_ide_init);
-module_exit(generic_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for generic PCI IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/hpt366.c b/drivers/ide/pci/hpt366.c
deleted file mode 100644
index a7909e9c720e..000000000000
--- a/drivers/ide/pci/hpt366.c
+++ /dev/null
@@ -1,1643 +0,0 @@
-/*
- * Copyright (C) 1999-2003 Andre Hedrick <andre@linux-ide.org>
- * Portions Copyright (C) 2001 Sun Microsystems, Inc.
- * Portions Copyright (C) 2003 Red Hat Inc
- * Portions Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- * Portions Copyright (C) 2005-2008 MontaVista Software, Inc.
- *
- * Thanks to HighPoint Technologies for their assistance, and hardware.
- * Special Thanks to Jon Burchmore in SanDiego for the deep pockets, his
- * donation of an ABit BP6 mainboard, processor, and memory acellerated
- * development and support.
- *
- *
- * HighPoint has its own drivers (open source except for the RAID part)
- * available from http://www.highpoint-tech.com/BIOS%20+%20Driver/.
- * This may be useful to anyone wanting to work on this driver, however do not
- * trust them too much since the code tends to become less and less meaningful
- * as the time passes... :-/
- *
- * Note that final HPT370 support was done by force extraction of GPL.
- *
- * - add function for getting/setting power status of drive
- * - the HPT370's state machine can get confused. reset it before each dma
- * xfer to prevent that from happening.
- * - reset state engine whenever we get an error.
- * - check for busmaster state at end of dma.
- * - use new highpoint timings.
- * - detect bus speed using highpoint register.
- * - use pll if we don't have a clock table. added a 66MHz table that's
- * just 2x the 33MHz table.
- * - removed turnaround. NOTE: we never want to switch between pll and
- * pci clocks as the chip can glitch in those cases. the highpoint
- * approved workaround slows everything down too much to be useful. in
- * addition, we would have to serialize access to each chip.
- * Adrian Sun <a.sun@sun.com>
- *
- * add drive timings for 66MHz PCI bus,
- * fix ATA Cable signal detection, fix incorrect /proc info
- * add /proc display for per-drive PIO/DMA/UDMA mode and
- * per-channel ATA-33/66 Cable detect.
- * Duncan Laurie <void@sun.com>
- *
- * fixup /proc output for multiple controllers
- * Tim Hockin <thockin@sun.com>
- *
- * On hpt366:
- * Reset the hpt366 on error, reset on dma
- * Fix disabling Fast Interrupt hpt366.
- * Mike Waychison <crlf@sun.com>
- *
- * Added support for 372N clocking and clock switching. The 372N needs
- * different clocks on read/write. This requires overloading rw_disk and
- * other deeply crazy things. Thanks to <http://www.hoerstreich.de> for
- * keeping me sane.
- * Alan Cox <alan@redhat.com>
- *
- * - fix the clock turnaround code: it was writing to the wrong ports when
- * called for the secondary channel, caching the current clock mode per-
- * channel caused the cached register value to get out of sync with the
- * actual one, the channels weren't serialized, the turnaround shouldn't
- * be done on 66 MHz PCI bus
- * - disable UltraATA/100 for HPT370 by default as the 33 MHz clock being used
- * does not allow for this speed anyway
- * - avoid touching disabled channels (e.g. HPT371/N are single channel chips,
- * their primary channel is kind of virtual, it isn't tied to any pins)
- * - fix/remove bad/unused timing tables and use one set of tables for the whole
- * HPT37x chip family; save space by introducing the separate transfer mode
- * table in which the mode lookup is done
- * - use f_CNT value saved by the HighPoint BIOS as reading it directly gives
- * the wrong PCI frequency since DPLL has already been calibrated by BIOS;
- * read it only from the function 0 of HPT374 chips
- * - fix the hotswap code: it caused RESET- to glitch when tristating the bus,
- * and for HPT36x the obsolete HDIO_TRISTATE_HWIF handler was called instead
- * - pass to init_chipset() handlers a copy of the IDE PCI device structure as
- * they tamper with its fields
- * - pass to the init_setup handlers a copy of the ide_pci_device_t structure
- * since they may tamper with its fields
- * - prefix the driver startup messages with the real chip name
- * - claim the extra 240 bytes of I/O space for all chips
- * - optimize the UltraDMA filtering and the drive list lookup code
- * - use pci_get_slot() to get to the function 1 of HPT36x/374
- * - cache offset of the channel's misc. control registers (MCRs) being used
- * throughout the driver
- * - only touch the relevant MCR when detecting the cable type on HPT374's
- * function 1
- * - rename all the register related variables consistently
- * - move all the interrupt twiddling code from the speedproc handlers into
- * init_hwif_hpt366(), also grouping all the DMA related code together there
- * - merge HPT36x/HPT37x speedproc handlers, fix PIO timing register mask and
- * separate the UltraDMA and MWDMA masks there to avoid changing PIO timings
- * when setting an UltraDMA mode
- * - fix hpt3xx_tune_drive() to set the PIO mode requested, not always select
- * the best possible one
- * - clean up DMA timeout handling for HPT370
- * - switch to using the enumeration type to differ between the numerous chip
- * variants, matching PCI device/revision ID with the chip type early, at the
- * init_setup stage
- * - extend the hpt_info structure to hold the DPLL and PCI clock frequencies,
- * stop duplicating it for each channel by storing the pointer in the pci_dev
- * structure: first, at the init_setup stage, point it to a static "template"
- * with only the chip type and its specific base DPLL frequency, the highest
- * UltraDMA mode, and the chip settings table pointer filled, then, at the
- * init_chipset stage, allocate per-chip instance and fill it with the rest
- * of the necessary information
- * - get rid of the constant thresholds in the HPT37x PCI clock detection code,
- * switch to calculating PCI clock frequency based on the chip's base DPLL
- * frequency
- * - switch to using the DPLL clock and enable UltraATA/133 mode by default on
- * anything newer than HPT370/A (except HPT374 that is not capable of this
- * mode according to the manual)
- * - fold PCI clock detection and DPLL setup code into init_chipset_hpt366(),
- * also fixing the interchanged 25/40 MHz PCI clock cases for HPT36x chips;
- * unify HPT36x/37x timing setup code and the speedproc handlers by joining
- * the register setting lists into the table indexed by the clock selected
- * - set the correct hwif->ultra_mask for each individual chip
- * - add Ultra and MW DMA mode filtering for the HPT37[24] based SATA cards
- * Sergei Shtylyov, <sshtylyov@ru.mvista.com> or <source@mvista.com>
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/blkdev.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-
-#define DRV_NAME "hpt366"
-
-/* various tuning parameters */
-#define HPT_RESET_STATE_ENGINE
-#undef HPT_DELAY_INTERRUPT
-#define HPT_SERIALIZE_IO 0
-
-static const char *quirk_drives[] = {
- "QUANTUM FIREBALLlct08 08",
- "QUANTUM FIREBALLP KA6.4",
- "QUANTUM FIREBALLP LM20.4",
- "QUANTUM FIREBALLP LM20.5",
- NULL
-};
-
-static const char *bad_ata100_5[] = {
- "IBM-DTLA-307075",
- "IBM-DTLA-307060",
- "IBM-DTLA-307045",
- "IBM-DTLA-307030",
- "IBM-DTLA-307020",
- "IBM-DTLA-307015",
- "IBM-DTLA-305040",
- "IBM-DTLA-305030",
- "IBM-DTLA-305020",
- "IC35L010AVER07-0",
- "IC35L020AVER07-0",
- "IC35L030AVER07-0",
- "IC35L040AVER07-0",
- "IC35L060AVER07-0",
- "WDC AC310200R",
- NULL
-};
-
-static const char *bad_ata66_4[] = {
- "IBM-DTLA-307075",
- "IBM-DTLA-307060",
- "IBM-DTLA-307045",
- "IBM-DTLA-307030",
- "IBM-DTLA-307020",
- "IBM-DTLA-307015",
- "IBM-DTLA-305040",
- "IBM-DTLA-305030",
- "IBM-DTLA-305020",
- "IC35L010AVER07-0",
- "IC35L020AVER07-0",
- "IC35L030AVER07-0",
- "IC35L040AVER07-0",
- "IC35L060AVER07-0",
- "WDC AC310200R",
- "MAXTOR STM3320620A",
- NULL
-};
-
-static const char *bad_ata66_3[] = {
- "WDC AC310200R",
- NULL
-};
-
-static const char *bad_ata33[] = {
- "Maxtor 92720U8", "Maxtor 92040U6", "Maxtor 91360U4", "Maxtor 91020U3", "Maxtor 90845U3", "Maxtor 90650U2",
- "Maxtor 91360D8", "Maxtor 91190D7", "Maxtor 91020D6", "Maxtor 90845D5", "Maxtor 90680D4", "Maxtor 90510D3", "Maxtor 90340D2",
- "Maxtor 91152D8", "Maxtor 91008D7", "Maxtor 90845D6", "Maxtor 90840D6", "Maxtor 90720D5", "Maxtor 90648D5", "Maxtor 90576D4",
- "Maxtor 90510D4",
- "Maxtor 90432D3", "Maxtor 90288D2", "Maxtor 90256D2",
- "Maxtor 91000D8", "Maxtor 90910D8", "Maxtor 90875D7", "Maxtor 90840D7", "Maxtor 90750D6", "Maxtor 90625D5", "Maxtor 90500D4",
- "Maxtor 91728D8", "Maxtor 91512D7", "Maxtor 91303D6", "Maxtor 91080D5", "Maxtor 90845D4", "Maxtor 90680D4", "Maxtor 90648D3", "Maxtor 90432D2",
- NULL
-};
-
-static u8 xfer_speeds[] = {
- XFER_UDMA_6,
- XFER_UDMA_5,
- XFER_UDMA_4,
- XFER_UDMA_3,
- XFER_UDMA_2,
- XFER_UDMA_1,
- XFER_UDMA_0,
-
- XFER_MW_DMA_2,
- XFER_MW_DMA_1,
- XFER_MW_DMA_0,
-
- XFER_PIO_4,
- XFER_PIO_3,
- XFER_PIO_2,
- XFER_PIO_1,
- XFER_PIO_0
-};
-
-/* Key for bus clock timings
- * 36x 37x
- * bits bits
- * 0:3 0:3 data_high_time. Inactive time of DIOW_/DIOR_ for PIO and MW DMA.
- * cycles = value + 1
- * 4:7 4:8 data_low_time. Active time of DIOW_/DIOR_ for PIO and MW DMA.
- * cycles = value + 1
- * 8:11 9:12 cmd_high_time. Inactive time of DIOW_/DIOR_ during task file
- * register access.
- * 12:15 13:17 cmd_low_time. Active time of DIOW_/DIOR_ during task file
- * register access.
- * 16:18 18:20 udma_cycle_time. Clock cycles for UDMA xfer.
- * - 21 CLK frequency: 0=ATA clock, 1=dual ATA clock.
- * 19:21 22:24 pre_high_time. Time to initialize the 1st cycle for PIO and
- * MW DMA xfer.
- * 22:24 25:27 cmd_pre_high_time. Time to initialize the 1st PIO cycle for
- * task file register access.
- * 28 28 UDMA enable.
- * 29 29 DMA enable.
- * 30 30 PIO MST enable. If set, the chip is in bus master mode during
- * PIO xfer.
- * 31 31 FIFO enable.
- */
-
-static u32 forty_base_hpt36x[] = {
- /* XFER_UDMA_6 */ 0x900fd943,
- /* XFER_UDMA_5 */ 0x900fd943,
- /* XFER_UDMA_4 */ 0x900fd943,
- /* XFER_UDMA_3 */ 0x900ad943,
- /* XFER_UDMA_2 */ 0x900bd943,
- /* XFER_UDMA_1 */ 0x9008d943,
- /* XFER_UDMA_0 */ 0x9008d943,
-
- /* XFER_MW_DMA_2 */ 0xa008d943,
- /* XFER_MW_DMA_1 */ 0xa010d955,
- /* XFER_MW_DMA_0 */ 0xa010d9fc,
-
- /* XFER_PIO_4 */ 0xc008d963,
- /* XFER_PIO_3 */ 0xc010d974,
- /* XFER_PIO_2 */ 0xc010d997,
- /* XFER_PIO_1 */ 0xc010d9c7,
- /* XFER_PIO_0 */ 0xc018d9d9
-};
-
-static u32 thirty_three_base_hpt36x[] = {
- /* XFER_UDMA_6 */ 0x90c9a731,
- /* XFER_UDMA_5 */ 0x90c9a731,
- /* XFER_UDMA_4 */ 0x90c9a731,
- /* XFER_UDMA_3 */ 0x90cfa731,
- /* XFER_UDMA_2 */ 0x90caa731,
- /* XFER_UDMA_1 */ 0x90cba731,
- /* XFER_UDMA_0 */ 0x90c8a731,
-
- /* XFER_MW_DMA_2 */ 0xa0c8a731,
- /* XFER_MW_DMA_1 */ 0xa0c8a732, /* 0xa0c8a733 */
- /* XFER_MW_DMA_0 */ 0xa0c8a797,
-
- /* XFER_PIO_4 */ 0xc0c8a731,
- /* XFER_PIO_3 */ 0xc0c8a742,
- /* XFER_PIO_2 */ 0xc0d0a753,
- /* XFER_PIO_1 */ 0xc0d0a7a3, /* 0xc0d0a793 */
- /* XFER_PIO_0 */ 0xc0d0a7aa /* 0xc0d0a7a7 */
-};
-
-static u32 twenty_five_base_hpt36x[] = {
- /* XFER_UDMA_6 */ 0x90c98521,
- /* XFER_UDMA_5 */ 0x90c98521,
- /* XFER_UDMA_4 */ 0x90c98521,
- /* XFER_UDMA_3 */ 0x90cf8521,
- /* XFER_UDMA_2 */ 0x90cf8521,
- /* XFER_UDMA_1 */ 0x90cb8521,
- /* XFER_UDMA_0 */ 0x90cb8521,
-
- /* XFER_MW_DMA_2 */ 0xa0ca8521,
- /* XFER_MW_DMA_1 */ 0xa0ca8532,
- /* XFER_MW_DMA_0 */ 0xa0ca8575,
-
- /* XFER_PIO_4 */ 0xc0ca8521,
- /* XFER_PIO_3 */ 0xc0ca8532,
- /* XFER_PIO_2 */ 0xc0ca8542,
- /* XFER_PIO_1 */ 0xc0d08572,
- /* XFER_PIO_0 */ 0xc0d08585
-};
-
-#if 0
-/* These are the timing tables from the HighPoint open source drivers... */
-static u32 thirty_three_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12446231, /* 0x12646231 ?? */
- /* XFER_UDMA_5 */ 0x12446231,
- /* XFER_UDMA_4 */ 0x12446231,
- /* XFER_UDMA_3 */ 0x126c6231,
- /* XFER_UDMA_2 */ 0x12486231,
- /* XFER_UDMA_1 */ 0x124c6233,
- /* XFER_UDMA_0 */ 0x12506297,
-
- /* XFER_MW_DMA_2 */ 0x22406c31,
- /* XFER_MW_DMA_1 */ 0x22406c33,
- /* XFER_MW_DMA_0 */ 0x22406c97,
-
- /* XFER_PIO_4 */ 0x06414e31,
- /* XFER_PIO_3 */ 0x06414e42,
- /* XFER_PIO_2 */ 0x06414e53,
- /* XFER_PIO_1 */ 0x06814e93,
- /* XFER_PIO_0 */ 0x06814ea7
-};
-
-static u32 fifty_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x12848242,
- /* XFER_UDMA_5 */ 0x12848242,
- /* XFER_UDMA_4 */ 0x12ac8242,
- /* XFER_UDMA_3 */ 0x128c8242,
- /* XFER_UDMA_2 */ 0x120c8242,
- /* XFER_UDMA_1 */ 0x12148254,
- /* XFER_UDMA_0 */ 0x121882ea,
-
- /* XFER_MW_DMA_2 */ 0x22808242,
- /* XFER_MW_DMA_1 */ 0x22808254,
- /* XFER_MW_DMA_0 */ 0x228082ea,
-
- /* XFER_PIO_4 */ 0x0a81f442,
- /* XFER_PIO_3 */ 0x0a81f443,
- /* XFER_PIO_2 */ 0x0a81f454,
- /* XFER_PIO_1 */ 0x0ac1f465,
- /* XFER_PIO_0 */ 0x0ac1f48a
-};
-
-static u32 sixty_six_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1c869c62,
- /* XFER_UDMA_5 */ 0x1cae9c62, /* 0x1c8a9c62 */
- /* XFER_UDMA_4 */ 0x1c8a9c62,
- /* XFER_UDMA_3 */ 0x1c8e9c62,
- /* XFER_UDMA_2 */ 0x1c929c62,
- /* XFER_UDMA_1 */ 0x1c9a9c62,
- /* XFER_UDMA_0 */ 0x1c829c62,
-
- /* XFER_MW_DMA_2 */ 0x2c829c62,
- /* XFER_MW_DMA_1 */ 0x2c829c66,
- /* XFER_MW_DMA_0 */ 0x2c829d2e,
-
- /* XFER_PIO_4 */ 0x0c829c62,
- /* XFER_PIO_3 */ 0x0c829c84,
- /* XFER_PIO_2 */ 0x0c829ca6,
- /* XFER_PIO_1 */ 0x0d029d26,
- /* XFER_PIO_0 */ 0x0d029d5e
-};
-#else
-/*
- * The following are the new timing tables with PIO mode data/taskfile transfer
- * overclocking fixed...
- */
-
-/* This table is taken from the HPT370 data manual rev. 1.02 */
-static u32 thirty_three_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x16455031, /* 0x16655031 ?? */
- /* XFER_UDMA_5 */ 0x16455031,
- /* XFER_UDMA_4 */ 0x16455031,
- /* XFER_UDMA_3 */ 0x166d5031,
- /* XFER_UDMA_2 */ 0x16495031,
- /* XFER_UDMA_1 */ 0x164d5033,
- /* XFER_UDMA_0 */ 0x16515097,
-
- /* XFER_MW_DMA_2 */ 0x26515031,
- /* XFER_MW_DMA_1 */ 0x26515033,
- /* XFER_MW_DMA_0 */ 0x26515097,
-
- /* XFER_PIO_4 */ 0x06515021,
- /* XFER_PIO_3 */ 0x06515022,
- /* XFER_PIO_2 */ 0x06515033,
- /* XFER_PIO_1 */ 0x06915065,
- /* XFER_PIO_0 */ 0x06d1508a
-};
-
-static u32 fifty_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1a861842,
- /* XFER_UDMA_5 */ 0x1a861842,
- /* XFER_UDMA_4 */ 0x1aae1842,
- /* XFER_UDMA_3 */ 0x1a8e1842,
- /* XFER_UDMA_2 */ 0x1a0e1842,
- /* XFER_UDMA_1 */ 0x1a161854,
- /* XFER_UDMA_0 */ 0x1a1a18ea,
-
- /* XFER_MW_DMA_2 */ 0x2a821842,
- /* XFER_MW_DMA_1 */ 0x2a821854,
- /* XFER_MW_DMA_0 */ 0x2a8218ea,
-
- /* XFER_PIO_4 */ 0x0a821842,
- /* XFER_PIO_3 */ 0x0a821843,
- /* XFER_PIO_2 */ 0x0a821855,
- /* XFER_PIO_1 */ 0x0ac218a8,
- /* XFER_PIO_0 */ 0x0b02190c
-};
-
-static u32 sixty_six_base_hpt37x[] = {
- /* XFER_UDMA_6 */ 0x1c86fe62,
- /* XFER_UDMA_5 */ 0x1caefe62, /* 0x1c8afe62 */
- /* XFER_UDMA_4 */ 0x1c8afe62,
- /* XFER_UDMA_3 */ 0x1c8efe62,
- /* XFER_UDMA_2 */ 0x1c92fe62,
- /* XFER_UDMA_1 */ 0x1c9afe62,
- /* XFER_UDMA_0 */ 0x1c82fe62,
-
- /* XFER_MW_DMA_2 */ 0x2c82fe62,
- /* XFER_MW_DMA_1 */ 0x2c82fe66,
- /* XFER_MW_DMA_0 */ 0x2c82ff2e,
-
- /* XFER_PIO_4 */ 0x0c82fe62,
- /* XFER_PIO_3 */ 0x0c82fe84,
- /* XFER_PIO_2 */ 0x0c82fea6,
- /* XFER_PIO_1 */ 0x0d02ff26,
- /* XFER_PIO_0 */ 0x0d42ff7f
-};
-#endif
-
-#define HPT366_DEBUG_DRIVE_INFO 0
-#define HPT371_ALLOW_ATA133_6 1
-#define HPT302_ALLOW_ATA133_6 1
-#define HPT372_ALLOW_ATA133_6 1
-#define HPT370_ALLOW_ATA100_5 0
-#define HPT366_ALLOW_ATA66_4 1
-#define HPT366_ALLOW_ATA66_3 1
-#define HPT366_MAX_DEVS 8
-
-/* Supported ATA clock frequencies */
-enum ata_clock {
- ATA_CLOCK_25MHZ,
- ATA_CLOCK_33MHZ,
- ATA_CLOCK_40MHZ,
- ATA_CLOCK_50MHZ,
- ATA_CLOCK_66MHZ,
- NUM_ATA_CLOCKS
-};
-
-struct hpt_timings {
- u32 pio_mask;
- u32 dma_mask;
- u32 ultra_mask;
- u32 *clock_table[NUM_ATA_CLOCKS];
-};
-
-/*
- * Hold all the HighPoint chip information in one place.
- */
-
-struct hpt_info {
- char *chip_name; /* Chip name */
- u8 chip_type; /* Chip type */
- u8 udma_mask; /* Allowed UltraDMA modes mask. */
- u8 dpll_clk; /* DPLL clock in MHz */
- u8 pci_clk; /* PCI clock in MHz */
- struct hpt_timings *timings; /* Chipset timing data */
- u8 clock; /* ATA clock selected */
-};
-
-/* Supported HighPoint chips */
-enum {
- HPT36x,
- HPT370,
- HPT370A,
- HPT374,
- HPT372,
- HPT372A,
- HPT302,
- HPT371,
- HPT372N,
- HPT302N,
- HPT371N
-};
-
-static struct hpt_timings hpt36x_timings = {
- .pio_mask = 0xc1f8ffff,
- .dma_mask = 0x303800ff,
- .ultra_mask = 0x30070000,
- .clock_table = {
- [ATA_CLOCK_25MHZ] = twenty_five_base_hpt36x,
- [ATA_CLOCK_33MHZ] = thirty_three_base_hpt36x,
- [ATA_CLOCK_40MHZ] = forty_base_hpt36x,
- [ATA_CLOCK_50MHZ] = NULL,
- [ATA_CLOCK_66MHZ] = NULL
- }
-};
-
-static struct hpt_timings hpt37x_timings = {
- .pio_mask = 0xcfc3ffff,
- .dma_mask = 0x31c001ff,
- .ultra_mask = 0x303c0000,
- .clock_table = {
- [ATA_CLOCK_25MHZ] = NULL,
- [ATA_CLOCK_33MHZ] = thirty_three_base_hpt37x,
- [ATA_CLOCK_40MHZ] = NULL,
- [ATA_CLOCK_50MHZ] = fifty_base_hpt37x,
- [ATA_CLOCK_66MHZ] = sixty_six_base_hpt37x
- }
-};
-
-static const struct hpt_info hpt36x __devinitdata = {
- .chip_name = "HPT36x",
- .chip_type = HPT36x,
- .udma_mask = HPT366_ALLOW_ATA66_3 ? (HPT366_ALLOW_ATA66_4 ? ATA_UDMA4 : ATA_UDMA3) : ATA_UDMA2,
- .dpll_clk = 0, /* no DPLL */
- .timings = &hpt36x_timings
-};
-
-static const struct hpt_info hpt370 __devinitdata = {
- .chip_name = "HPT370",
- .chip_type = HPT370,
- .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
- .dpll_clk = 48,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt370a __devinitdata = {
- .chip_name = "HPT370A",
- .chip_type = HPT370A,
- .udma_mask = HPT370_ALLOW_ATA100_5 ? ATA_UDMA5 : ATA_UDMA4,
- .dpll_clk = 48,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt374 __devinitdata = {
- .chip_name = "HPT374",
- .chip_type = HPT374,
- .udma_mask = ATA_UDMA5,
- .dpll_clk = 48,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt372 __devinitdata = {
- .chip_name = "HPT372",
- .chip_type = HPT372,
- .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 55,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt372a __devinitdata = {
- .chip_name = "HPT372A",
- .chip_type = HPT372A,
- .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 66,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt302 __devinitdata = {
- .chip_name = "HPT302",
- .chip_type = HPT302,
- .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 66,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt371 __devinitdata = {
- .chip_name = "HPT371",
- .chip_type = HPT371,
- .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 66,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt372n __devinitdata = {
- .chip_name = "HPT372N",
- .chip_type = HPT372N,
- .udma_mask = HPT372_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 77,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt302n __devinitdata = {
- .chip_name = "HPT302N",
- .chip_type = HPT302N,
- .udma_mask = HPT302_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 77,
- .timings = &hpt37x_timings
-};
-
-static const struct hpt_info hpt371n __devinitdata = {
- .chip_name = "HPT371N",
- .chip_type = HPT371N,
- .udma_mask = HPT371_ALLOW_ATA133_6 ? ATA_UDMA6 : ATA_UDMA5,
- .dpll_clk = 77,
- .timings = &hpt37x_timings
-};
-
-static int check_in_drive_list(ide_drive_t *drive, const char **list)
-{
- char *m = (char *)&drive->id[ATA_ID_PROD];
-
- while (*list)
- if (!strcmp(*list++, m))
- return 1;
- return 0;
-}
-
-static struct hpt_info *hpt3xx_get_info(struct device *dev)
-{
- struct ide_host *host = dev_get_drvdata(dev);
- struct hpt_info *info = (struct hpt_info *)host->host_priv;
-
- return dev == host->dev[1] ? info + 1 : info;
-}
-
-/*
- * The Marvell bridge chips used on the HighPoint SATA cards do not seem
- * to support the UltraDMA modes 1, 2, and 3 as well as any MWDMA modes...
- */
-
-static u8 hpt3xx_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- u8 mask = hwif->ultra_mask;
-
- switch (info->chip_type) {
- case HPT36x:
- if (!HPT366_ALLOW_ATA66_4 ||
- check_in_drive_list(drive, bad_ata66_4))
- mask = ATA_UDMA3;
-
- if (!HPT366_ALLOW_ATA66_3 ||
- check_in_drive_list(drive, bad_ata66_3))
- mask = ATA_UDMA2;
- break;
- case HPT370:
- if (!HPT370_ALLOW_ATA100_5 ||
- check_in_drive_list(drive, bad_ata100_5))
- mask = ATA_UDMA4;
- break;
- case HPT370A:
- if (!HPT370_ALLOW_ATA100_5 ||
- check_in_drive_list(drive, bad_ata100_5))
- return ATA_UDMA4;
- case HPT372 :
- case HPT372A:
- case HPT372N:
- case HPT374 :
- if (ata_id_is_sata(drive->id))
- mask &= ~0x0e;
- /* Fall thru */
- default:
- return mask;
- }
-
- return check_in_drive_list(drive, bad_ata33) ? 0x00 : mask;
-}
-
-static u8 hpt3xx_mdma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
-
- switch (info->chip_type) {
- case HPT372 :
- case HPT372A:
- case HPT372N:
- case HPT374 :
- if (ata_id_is_sata(drive->id))
- return 0x00;
- /* Fall thru */
- default:
- return 0x07;
- }
-}
-
-static u32 get_speed_setting(u8 speed, struct hpt_info *info)
-{
- int i;
-
- /*
- * Lookup the transfer mode table to get the index into
- * the timing table.
- *
- * NOTE: For XFER_PIO_SLOW, PIO mode 0 timings will be used.
- */
- for (i = 0; i < ARRAY_SIZE(xfer_speeds) - 1; i++)
- if (xfer_speeds[i] == speed)
- break;
-
- return info->timings->clock_table[info->clock][i];
-}
-
-static void hpt3xx_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- struct hpt_timings *t = info->timings;
- u8 itr_addr = 0x40 + (drive->dn * 4);
- u32 old_itr = 0;
- u32 new_itr = get_speed_setting(speed, info);
- u32 itr_mask = speed < XFER_MW_DMA_0 ? t->pio_mask :
- (speed < XFER_UDMA_0 ? t->dma_mask :
- t->ultra_mask);
-
- pci_read_config_dword(dev, itr_addr, &old_itr);
- new_itr = (old_itr & ~itr_mask) | (new_itr & itr_mask);
- /*
- * Disable on-chip PIO FIFO/buffer (and PIO MST mode as well)
- * to avoid problems handling I/O errors later
- */
- new_itr &= ~0xc0000000;
-
- pci_write_config_dword(dev, itr_addr, new_itr);
-}
-
-static void hpt3xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- hpt3xx_set_mode(drive, XFER_PIO_0 + pio);
-}
-
-static void hpt3xx_quirkproc(ide_drive_t *drive)
-{
- char *m = (char *)&drive->id[ATA_ID_PROD];
- const char **list = quirk_drives;
-
- while (*list)
- if (strstr(m, *list++)) {
- drive->quirk_list = 1;
- return;
- }
-
- drive->quirk_list = 0;
-}
-
-static void hpt3xx_maskproc(ide_drive_t *drive, int mask)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
-
- if (drive->quirk_list == 0)
- return;
-
- if (info->chip_type >= HPT370) {
- u8 scr1 = 0;
-
- pci_read_config_byte(dev, 0x5a, &scr1);
- if (((scr1 & 0x10) >> 4) != mask) {
- if (mask)
- scr1 |= 0x10;
- else
- scr1 &= ~0x10;
- pci_write_config_byte(dev, 0x5a, scr1);
- }
- } else if (mask)
- disable_irq(hwif->irq);
- else
- enable_irq(hwif->irq);
-}
-
-/*
- * This is specific to the HPT366 UDMA chipset
- * by HighPoint|Triones Technologies, Inc.
- */
-static void hpt366_dma_lost_irq(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 mcr1 = 0, mcr3 = 0, scr1 = 0;
-
- pci_read_config_byte(dev, 0x50, &mcr1);
- pci_read_config_byte(dev, 0x52, &mcr3);
- pci_read_config_byte(dev, 0x5a, &scr1);
- printk("%s: (%s) mcr1=0x%02x, mcr3=0x%02x, scr1=0x%02x\n",
- drive->name, __func__, mcr1, mcr3, scr1);
- if (scr1 & 0x10)
- pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
- ide_dma_lost_irq(drive);
-}
-
-static void hpt370_clear_engine(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- pci_write_config_byte(dev, hwif->select_data, 0x37);
- udelay(10);
-}
-
-static void hpt370_irq_timeout(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 bfifo = 0;
- u8 dma_cmd;
-
- pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
- printk(KERN_DEBUG "%s: %d bytes in FIFO\n", drive->name, bfifo & 0x1ff);
-
- /* get DMA command mode */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- /* stop DMA */
- outb(dma_cmd & ~0x1, hwif->dma_base + ATA_DMA_CMD);
- hpt370_clear_engine(drive);
-}
-
-static void hpt370_dma_start(ide_drive_t *drive)
-{
-#ifdef HPT_RESET_STATE_ENGINE
- hpt370_clear_engine(drive);
-#endif
- ide_dma_start(drive);
-}
-
-static int hpt370_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-
- if (dma_stat & 0x01) {
- /* wait a little */
- udelay(20);
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- if (dma_stat & 0x01)
- hpt370_irq_timeout(drive);
- }
- return ide_dma_end(drive);
-}
-
-static void hpt370_dma_timeout(ide_drive_t *drive)
-{
- hpt370_irq_timeout(drive);
- ide_dma_timeout(drive);
-}
-
-/* returns 1 if DMA IRQ issued, 0 otherwise */
-static int hpt374_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 bfifo = 0;
- u8 dma_stat;
-
- pci_read_config_word(dev, hwif->select_data + 2, &bfifo);
- if (bfifo & 0x1FF) {
-// printk("%s: %d bytes in FIFO\n", drive->name, bfifo);
- return 0;
- }
-
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- /* return 1 if INTR asserted */
- if (dma_stat & 4)
- return 1;
-
- return 0;
-}
-
-static int hpt374_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 mcr = 0, mcr_addr = hwif->select_data;
- u8 bwsr = 0, mask = hwif->channel ? 0x02 : 0x01;
-
- pci_read_config_byte(dev, 0x6a, &bwsr);
- pci_read_config_byte(dev, mcr_addr, &mcr);
- if (bwsr & mask)
- pci_write_config_byte(dev, mcr_addr, mcr | 0x30);
- return ide_dma_end(drive);
-}
-
-/**
- * hpt3xxn_set_clock - perform clock switching dance
- * @hwif: hwif to switch
- * @mode: clocking mode (0x21 for write, 0x23 otherwise)
- *
- * Switch the DPLL clock on the HPT3xxN devices. This is a right mess.
- */
-
-static void hpt3xxn_set_clock(ide_hwif_t *hwif, u8 mode)
-{
- unsigned long base = hwif->extra_base;
- u8 scr2 = inb(base + 0x6b);
-
- if ((scr2 & 0x7f) == mode)
- return;
-
- /* Tristate the bus */
- outb(0x80, base + 0x63);
- outb(0x80, base + 0x67);
-
- /* Switch clock and reset channels */
- outb(mode, base + 0x6b);
- outb(0xc0, base + 0x69);
-
- /*
- * Reset the state machines.
- * NOTE: avoid accidentally enabling the disabled channels.
- */
- outb(inb(base + 0x60) | 0x32, base + 0x60);
- outb(inb(base + 0x64) | 0x32, base + 0x64);
-
- /* Complete reset */
- outb(0x00, base + 0x69);
-
- /* Reconnect channels to bus */
- outb(0x00, base + 0x63);
- outb(0x00, base + 0x67);
-}
-
-/**
- * hpt3xxn_rw_disk - prepare for I/O
- * @drive: drive for command
- * @rq: block request structure
- *
- * This is called when a disk I/O is issued to HPT3xxN.
- * We need it because of the clock switching.
- */
-
-static void hpt3xxn_rw_disk(ide_drive_t *drive, struct request *rq)
-{
- hpt3xxn_set_clock(HWIF(drive), rq_data_dir(rq) ? 0x23 : 0x21);
-}
-
-/**
- * hpt37x_calibrate_dpll - calibrate the DPLL
- * @dev: PCI device
- *
- * Perform a calibration cycle on the DPLL.
- * Returns 1 if this succeeds
- */
-static int hpt37x_calibrate_dpll(struct pci_dev *dev, u16 f_low, u16 f_high)
-{
- u32 dpll = (f_high << 16) | f_low | 0x100;
- u8 scr2;
- int i;
-
- pci_write_config_dword(dev, 0x5c, dpll);
-
- /* Wait for oscillator ready */
- for(i = 0; i < 0x5000; ++i) {
- udelay(50);
- pci_read_config_byte(dev, 0x5b, &scr2);
- if (scr2 & 0x80)
- break;
- }
- /* See if it stays ready (we'll just bail out if it's not yet) */
- for(i = 0; i < 0x1000; ++i) {
- pci_read_config_byte(dev, 0x5b, &scr2);
- /* DPLL destabilized? */
- if(!(scr2 & 0x80))
- return 0;
- }
- /* Turn off tuning, we have the DPLL set */
- pci_read_config_dword (dev, 0x5c, &dpll);
- pci_write_config_dword(dev, 0x5c, (dpll & ~0x100));
- return 1;
-}
-
-static void hpt3xx_disable_fast_irq(struct pci_dev *dev, u8 mcr_addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct hpt_info *info = host->host_priv + (&dev->dev == host->dev[1]);
- u8 chip_type = info->chip_type;
- u8 new_mcr, old_mcr = 0;
-
- /*
- * Disable the "fast interrupt" prediction. Don't hold off
- * on interrupts. (== 0x01 despite what the docs say)
- */
- pci_read_config_byte(dev, mcr_addr + 1, &old_mcr);
-
- if (chip_type >= HPT374)
- new_mcr = old_mcr & ~0x07;
- else if (chip_type >= HPT370) {
- new_mcr = old_mcr;
- new_mcr &= ~0x02;
-#ifdef HPT_DELAY_INTERRUPT
- new_mcr &= ~0x01;
-#else
- new_mcr |= 0x01;
-#endif
- } else /* HPT366 and HPT368 */
- new_mcr = old_mcr & ~0x80;
-
- if (new_mcr != old_mcr)
- pci_write_config_byte(dev, mcr_addr + 1, new_mcr);
-}
-
-static unsigned int init_chipset_hpt366(struct pci_dev *dev)
-{
- unsigned long io_base = pci_resource_start(dev, 4);
- struct hpt_info *info = hpt3xx_get_info(&dev->dev);
- const char *name = DRV_NAME;
- u8 pci_clk, dpll_clk = 0; /* PCI and DPLL clock in MHz */
- u8 chip_type;
- enum ata_clock clock;
-
- chip_type = info->chip_type;
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, (L1_CACHE_BYTES / 4));
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x78);
- pci_write_config_byte(dev, PCI_MIN_GNT, 0x08);
- pci_write_config_byte(dev, PCI_MAX_LAT, 0x08);
-
- /*
- * First, try to estimate the PCI clock frequency...
- */
- if (chip_type >= HPT370) {
- u8 scr1 = 0;
- u16 f_cnt = 0;
- u32 temp = 0;
-
- /* Interrupt force enable. */
- pci_read_config_byte(dev, 0x5a, &scr1);
- if (scr1 & 0x10)
- pci_write_config_byte(dev, 0x5a, scr1 & ~0x10);
-
- /*
- * HighPoint does this for HPT372A.
- * NOTE: This register is only writeable via I/O space.
- */
- if (chip_type == HPT372A)
- outb(0x0e, io_base + 0x9c);
-
- /*
- * Default to PCI clock. Make sure MA15/16 are set to output
- * to prevent drives having problems with 40-pin cables.
- */
- pci_write_config_byte(dev, 0x5b, 0x23);
-
- /*
- * We'll have to read f_CNT value in order to determine
- * the PCI clock frequency according to the following ratio:
- *
- * f_CNT = Fpci * 192 / Fdpll
- *
- * First try reading the register in which the HighPoint BIOS
- * saves f_CNT value before reprogramming the DPLL from its
- * default setting (which differs for the various chips).
- *
- * NOTE: This register is only accessible via I/O space;
- * HPT374 BIOS only saves it for the function 0, so we have to
- * always read it from there -- no need to check the result of
- * pci_get_slot() for the function 0 as the whole device has
- * been already "pinned" (via function 1) in init_setup_hpt374()
- */
- if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
- struct pci_dev *dev1 = pci_get_slot(dev->bus,
- dev->devfn - 1);
- unsigned long io_base = pci_resource_start(dev1, 4);
-
- temp = inl(io_base + 0x90);
- pci_dev_put(dev1);
- } else
- temp = inl(io_base + 0x90);
-
- /*
- * In case the signature check fails, we'll have to
- * resort to reading the f_CNT register itself in hopes
- * that nobody has touched the DPLL yet...
- */
- if ((temp & 0xFFFFF000) != 0xABCDE000) {
- int i;
-
- printk(KERN_WARNING "%s %s: no clock data saved by "
- "BIOS\n", name, pci_name(dev));
-
- /* Calculate the average value of f_CNT. */
- for (temp = i = 0; i < 128; i++) {
- pci_read_config_word(dev, 0x78, &f_cnt);
- temp += f_cnt & 0x1ff;
- mdelay(1);
- }
- f_cnt = temp / 128;
- } else
- f_cnt = temp & 0x1ff;
-
- dpll_clk = info->dpll_clk;
- pci_clk = (f_cnt * dpll_clk) / 192;
-
- /* Clamp PCI clock to bands. */
- if (pci_clk < 40)
- pci_clk = 33;
- else if(pci_clk < 45)
- pci_clk = 40;
- else if(pci_clk < 55)
- pci_clk = 50;
- else
- pci_clk = 66;
-
- printk(KERN_INFO "%s %s: DPLL base: %d MHz, f_CNT: %d, "
- "assuming %d MHz PCI\n", name, pci_name(dev),
- dpll_clk, f_cnt, pci_clk);
- } else {
- u32 itr1 = 0;
-
- pci_read_config_dword(dev, 0x40, &itr1);
-
- /* Detect PCI clock by looking at cmd_high_time. */
- switch((itr1 >> 8) & 0x07) {
- case 0x09:
- pci_clk = 40;
- break;
- case 0x05:
- pci_clk = 25;
- break;
- case 0x07:
- default:
- pci_clk = 33;
- break;
- }
- }
-
- /* Let's assume we'll use PCI clock for the ATA clock... */
- switch (pci_clk) {
- case 25:
- clock = ATA_CLOCK_25MHZ;
- break;
- case 33:
- default:
- clock = ATA_CLOCK_33MHZ;
- break;
- case 40:
- clock = ATA_CLOCK_40MHZ;
- break;
- case 50:
- clock = ATA_CLOCK_50MHZ;
- break;
- case 66:
- clock = ATA_CLOCK_66MHZ;
- break;
- }
-
- /*
- * Only try the DPLL if we don't have a table for the PCI clock that
- * we are running at for HPT370/A, always use it for anything newer...
- *
- * NOTE: Using the internal DPLL results in slow reads on 33 MHz PCI.
- * We also don't like using the DPLL because this causes glitches
- * on PRST-/SRST- when the state engine gets reset...
- */
- if (chip_type >= HPT374 || info->timings->clock_table[clock] == NULL) {
- u16 f_low, delta = pci_clk < 50 ? 2 : 4;
- int adjust;
-
- /*
- * Select 66 MHz DPLL clock only if UltraATA/133 mode is
- * supported/enabled, use 50 MHz DPLL clock otherwise...
- */
- if (info->udma_mask == ATA_UDMA6) {
- dpll_clk = 66;
- clock = ATA_CLOCK_66MHZ;
- } else if (dpll_clk) { /* HPT36x chips don't have DPLL */
- dpll_clk = 50;
- clock = ATA_CLOCK_50MHZ;
- }
-
- if (info->timings->clock_table[clock] == NULL) {
- printk(KERN_ERR "%s %s: unknown bus timing!\n",
- name, pci_name(dev));
- return -EIO;
- }
-
- /* Select the DPLL clock. */
- pci_write_config_byte(dev, 0x5b, 0x21);
-
- /*
- * Adjust the DPLL based upon PCI clock, enable it,
- * and wait for stabilization...
- */
- f_low = (pci_clk * 48) / dpll_clk;
-
- for (adjust = 0; adjust < 8; adjust++) {
- if(hpt37x_calibrate_dpll(dev, f_low, f_low + delta))
- break;
-
- /*
- * See if it'll settle at a fractionally different clock
- */
- if (adjust & 1)
- f_low -= adjust >> 1;
- else
- f_low += adjust >> 1;
- }
- if (adjust == 8) {
- printk(KERN_ERR "%s %s: DPLL did not stabilize!\n",
- name, pci_name(dev));
- return -EIO;
- }
-
- printk(KERN_INFO "%s %s: using %d MHz DPLL clock\n",
- name, pci_name(dev), dpll_clk);
- } else {
- /* Mark the fact that we're not using the DPLL. */
- dpll_clk = 0;
-
- printk(KERN_INFO "%s %s: using %d MHz PCI clock\n",
- name, pci_name(dev), pci_clk);
- }
-
- /* Store the clock frequencies. */
- info->dpll_clk = dpll_clk;
- info->pci_clk = pci_clk;
- info->clock = clock;
-
- if (chip_type >= HPT370) {
- u8 mcr1, mcr4;
-
- /*
- * Reset the state engines.
- * NOTE: Avoid accidentally enabling the disabled channels.
- */
- pci_read_config_byte (dev, 0x50, &mcr1);
- pci_read_config_byte (dev, 0x54, &mcr4);
- pci_write_config_byte(dev, 0x50, (mcr1 | 0x32));
- pci_write_config_byte(dev, 0x54, (mcr4 | 0x32));
- udelay(100);
- }
-
- /*
- * On HPT371N, if ATA clock is 66 MHz we must set bit 2 in
- * the MISC. register to stretch the UltraDMA Tss timing.
- * NOTE: This register is only writeable via I/O space.
- */
- if (chip_type == HPT371N && clock == ATA_CLOCK_66MHZ)
- outb(inb(io_base + 0x9c) | 0x04, io_base + 0x9c);
-
- hpt3xx_disable_fast_irq(dev, 0x50);
- hpt3xx_disable_fast_irq(dev, 0x54);
-
- return dev->irq;
-}
-
-static u8 hpt3xx_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- u8 chip_type = info->chip_type;
- u8 scr1 = 0, ata66 = hwif->channel ? 0x01 : 0x02;
-
- /*
- * The HPT37x uses the CBLID pins as outputs for MA15/MA16
- * address lines to access an external EEPROM. To read valid
- * cable detect state the pins must be enabled as inputs.
- */
- if (chip_type == HPT374 && (PCI_FUNC(dev->devfn) & 1)) {
- /*
- * HPT374 PCI function 1
- * - set bit 15 of reg 0x52 to enable TCBLID as input
- * - set bit 15 of reg 0x56 to enable FCBLID as input
- */
- u8 mcr_addr = hwif->select_data + 2;
- u16 mcr;
-
- pci_read_config_word(dev, mcr_addr, &mcr);
- pci_write_config_word(dev, mcr_addr, (mcr | 0x8000));
- /* now read cable id register */
- pci_read_config_byte(dev, 0x5a, &scr1);
- pci_write_config_word(dev, mcr_addr, mcr);
- } else if (chip_type >= HPT370) {
- /*
- * HPT370/372 and 374 pcifn 0
- * - clear bit 0 of reg 0x5b to enable P/SCBLID as inputs
- */
- u8 scr2 = 0;
-
- pci_read_config_byte(dev, 0x5b, &scr2);
- pci_write_config_byte(dev, 0x5b, (scr2 & ~1));
- /* now read cable id register */
- pci_read_config_byte(dev, 0x5a, &scr1);
- pci_write_config_byte(dev, 0x5b, scr2);
- } else
- pci_read_config_byte(dev, 0x5a, &scr1);
-
- return (scr1 & ata66) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static void __devinit init_hwif_hpt366(ide_hwif_t *hwif)
-{
- struct hpt_info *info = hpt3xx_get_info(hwif->dev);
- int serialize = HPT_SERIALIZE_IO;
- u8 chip_type = info->chip_type;
-
- /* Cache the channel's MISC. control registers' offset */
- hwif->select_data = hwif->channel ? 0x54 : 0x50;
-
- /*
- * HPT3xxN chips have some complications:
- *
- * - on 33 MHz PCI we must clock switch
- * - on 66 MHz PCI we must NOT use the PCI clock
- */
- if (chip_type >= HPT372N && info->dpll_clk && info->pci_clk < 66) {
- /*
- * Clock is shared between the channels,
- * so we'll have to serialize them... :-(
- */
- serialize = 1;
- hwif->rw_disk = &hpt3xxn_rw_disk;
- }
-
- /* Serialize access to this device if needed */
- if (serialize && hwif->mate)
- hwif->serialized = hwif->mate->serialized = 1;
-}
-
-static int __devinit init_dma_hpt366(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long flags, base = ide_pci_dma_base(hwif, d);
- u8 dma_old, dma_new, masterdma = 0, slavedma = 0;
-
- if (base == 0)
- return -1;
-
- hwif->dma_base = base;
-
- if (ide_pci_check_simplex(hwif, d) < 0)
- return -1;
-
- if (ide_pci_set_master(dev, d->name) < 0)
- return -1;
-
- dma_old = inb(base + 2);
-
- local_irq_save(flags);
-
- dma_new = dma_old;
- pci_read_config_byte(dev, hwif->channel ? 0x4b : 0x43, &masterdma);
- pci_read_config_byte(dev, hwif->channel ? 0x4f : 0x47, &slavedma);
-
- if (masterdma & 0x30) dma_new |= 0x20;
- if ( slavedma & 0x30) dma_new |= 0x40;
- if (dma_new != dma_old)
- outb(dma_new, base + 2);
-
- local_irq_restore(flags);
-
- printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
- hwif->name, base, base + 7);
-
- hwif->extra_base = base + (hwif->channel ? 8 : 16);
-
- if (ide_allocate_dma_engine(hwif))
- return -1;
-
- hwif->dma_ops = &sff_dma_ops;
-
- return 0;
-}
-
-static void __devinit hpt374_init(struct pci_dev *dev, struct pci_dev *dev2)
-{
- if (dev2->irq != dev->irq) {
- /* FIXME: we need a core pci_set_interrupt() */
- dev2->irq = dev->irq;
- printk(KERN_INFO DRV_NAME " %s: PCI config space interrupt "
- "fixed\n", pci_name(dev2));
- }
-}
-
-static void __devinit hpt371_init(struct pci_dev *dev)
-{
- u8 mcr1 = 0;
-
- /*
- * HPT371 chips physically have only one channel, the secondary one,
- * but the primary channel registers do exist! Go figure...
- * So, we manually disable the non-existing channel here
- * (if the BIOS hasn't done this already).
- */
- pci_read_config_byte(dev, 0x50, &mcr1);
- if (mcr1 & 0x04)
- pci_write_config_byte(dev, 0x50, mcr1 & ~0x04);
-}
-
-static int __devinit hpt36x_init(struct pci_dev *dev, struct pci_dev *dev2)
-{
- u8 mcr1 = 0, pin1 = 0, pin2 = 0;
-
- /*
- * Now we'll have to force both channels enabled if
- * at least one of them has been enabled by BIOS...
- */
- pci_read_config_byte(dev, 0x50, &mcr1);
- if (mcr1 & 0x30)
- pci_write_config_byte(dev, 0x50, mcr1 | 0x30);
-
- pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin1);
- pci_read_config_byte(dev2, PCI_INTERRUPT_PIN, &pin2);
-
- if (pin1 != pin2 && dev->irq == dev2->irq) {
- printk(KERN_INFO DRV_NAME " %s: onboard version of chipset, "
- "pin1=%d pin2=%d\n", pci_name(dev), pin1, pin2);
- return 1;
- }
-
- return 0;
-}
-
-#define IDE_HFLAGS_HPT3XX \
- (IDE_HFLAG_NO_ATAPI_DMA | \
- IDE_HFLAG_OFF_BOARD)
-
-static const struct ide_port_ops hpt3xx_port_ops = {
- .set_pio_mode = hpt3xx_set_pio_mode,
- .set_dma_mode = hpt3xx_set_mode,
- .quirkproc = hpt3xx_quirkproc,
- .maskproc = hpt3xx_maskproc,
- .mdma_filter = hpt3xx_mdma_filter,
- .udma_filter = hpt3xx_udma_filter,
- .cable_detect = hpt3xx_cable_detect,
-};
-
-static const struct ide_dma_ops hpt37x_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = hpt374_dma_end,
- .dma_test_irq = hpt374_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_dma_ops hpt370_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = hpt370_dma_start,
- .dma_end = hpt370_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = hpt370_dma_timeout,
-};
-
-static const struct ide_dma_ops hpt36x_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = hpt366_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info hpt366_chipsets[] __devinitdata = {
- { /* 0: HPT36x */
- .name = DRV_NAME,
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- /*
- * HPT36x chips have one channel per function and have
- * both channel enable bits located differently and visible
- * to both functions -- really stupid design decision... :-(
- * Bit 4 is for the primary channel, bit 5 for the secondary.
- */
- .enablebits = {{0x50,0x10,0x10}, {0x54,0x04,0x04}},
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt36x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX | IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- },
- { /* 1: HPT3xx */
- .name = DRV_NAME,
- .init_chipset = init_chipset_hpt366,
- .init_hwif = init_hwif_hpt366,
- .init_dma = init_dma_hpt366,
- .enablebits = {{0x50,0x04,0x04}, {0x54,0x04,0x04}},
- .port_ops = &hpt3xx_port_ops,
- .dma_ops = &hpt37x_dma_ops,
- .host_flags = IDE_HFLAGS_HPT3XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- }
-};
-
-/**
- * hpt366_init_one - called when an HPT366 is found
- * @dev: the hpt366 device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-static int __devinit hpt366_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct hpt_info *info = NULL;
- struct hpt_info *dyn_info;
- struct pci_dev *dev2 = NULL;
- struct ide_port_info d;
- u8 idx = id->driver_data;
- u8 rev = dev->revision;
- int ret;
-
- if ((idx == 0 || idx == 4) && (PCI_FUNC(dev->devfn) & 1))
- return -ENODEV;
-
- switch (idx) {
- case 0:
- if (rev < 3)
- info = &hpt36x;
- else {
- switch (min_t(u8, rev, 6)) {
- case 3: info = &hpt370; break;
- case 4: info = &hpt370a; break;
- case 5: info = &hpt372; break;
- case 6: info = &hpt372n; break;
- }
- idx++;
- }
- break;
- case 1:
- info = (rev > 1) ? &hpt372n : &hpt372a;
- break;
- case 2:
- info = (rev > 1) ? &hpt302n : &hpt302;
- break;
- case 3:
- hpt371_init(dev);
- info = (rev > 1) ? &hpt371n : &hpt371;
- break;
- case 4:
- info = &hpt374;
- break;
- case 5:
- info = &hpt372n;
- break;
- }
-
- printk(KERN_INFO DRV_NAME ": %s chipset detected\n", info->chip_name);
-
- d = hpt366_chipsets[min_t(u8, idx, 1)];
-
- d.udma_mask = info->udma_mask;
-
- /* fixup ->dma_ops for HPT370/HPT370A */
- if (info == &hpt370 || info == &hpt370a)
- d.dma_ops = &hpt370_dma_ops;
-
- if (info == &hpt36x || info == &hpt374)
- dev2 = pci_get_slot(dev->bus, dev->devfn + 1);
-
- dyn_info = kzalloc(sizeof(*dyn_info) * (dev2 ? 2 : 1), GFP_KERNEL);
- if (dyn_info == NULL) {
- printk(KERN_ERR "%s %s: out of memory!\n",
- d.name, pci_name(dev));
- pci_dev_put(dev2);
- return -ENOMEM;
- }
-
- /*
- * Copy everything from a static "template" structure
- * to just allocated per-chip hpt_info structure.
- */
- memcpy(dyn_info, info, sizeof(*dyn_info));
-
- if (dev2) {
- memcpy(dyn_info + 1, info, sizeof(*dyn_info));
-
- if (info == &hpt374)
- hpt374_init(dev, dev2);
- else {
- if (hpt36x_init(dev, dev2))
- d.host_flags &= ~IDE_HFLAG_NON_BOOTABLE;
- }
-
- ret = ide_pci_init_two(dev, dev2, &d, dyn_info);
- if (ret < 0) {
- pci_dev_put(dev2);
- kfree(dyn_info);
- }
- return ret;
- }
-
- ret = ide_pci_init_one(dev, &d, dyn_info);
- if (ret < 0)
- kfree(dyn_info);
-
- return ret;
-}
-
-static void __devexit hpt366_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct ide_info *info = host->host_priv;
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
- ide_pci_remove(dev);
- pci_dev_put(dev2);
- kfree(info);
-}
-
-static const struct pci_device_id hpt366_pci_tbl[] __devinitconst = {
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT366), 0 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372), 1 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT302), 2 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT371), 3 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT374), 4 },
- { PCI_VDEVICE(TTI, PCI_DEVICE_ID_TTI_HPT372N), 5 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, hpt366_pci_tbl);
-
-static struct pci_driver hpt366_pci_driver = {
- .name = "HPT366_IDE",
- .id_table = hpt366_pci_tbl,
- .probe = hpt366_init_one,
- .remove = __devexit_p(hpt366_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init hpt366_ide_init(void)
-{
- return ide_pci_register_driver(&hpt366_pci_driver);
-}
-
-static void __exit hpt366_ide_exit(void)
-{
- pci_unregister_driver(&hpt366_pci_driver);
-}
-
-module_init(hpt366_ide_init);
-module_exit(hpt366_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for Highpoint HPT366 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/it8213.c b/drivers/ide/pci/it8213.c
deleted file mode 100644
index 7c2feeb3c5ec..000000000000
--- a/drivers/ide/pci/it8213.c
+++ /dev/null
@@ -1,216 +0,0 @@
-/*
- * ITE 8213 IDE driver
- *
- * Copyright (C) 2006 Jack Lee
- * Copyright (C) 2006 Alan Cox
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "it8213"
-
-/**
- * it8213_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Set the interface PIO mode.
- */
-
-static void it8213_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int is_slave = drive->dn & 1;
- int master_port = 0x40;
- int slave_port = 0x44;
- unsigned long flags;
- u16 master_data;
- u8 slave_data;
- static DEFINE_SPINLOCK(tune_lock);
- int control = 0;
-
- static const u8 timings[][2] = {
- { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- spin_lock_irqsave(&tune_lock, flags);
- pci_read_config_word(dev, master_port, &master_data);
-
- if (pio > 1)
- control |= 1; /* Programmable timing on */
- if (drive->media != ide_disk)
- control |= 4; /* ATAPI */
- if (pio > 2)
- control |= 2; /* IORDY */
- if (is_slave) {
- master_data |= 0x4000;
- master_data &= ~0x0070;
- if (pio > 1)
- master_data = master_data | (control << 4);
- pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data = slave_data & 0xf0;
- slave_data = slave_data | (timings[pio][0] << 2) | timings[pio][1];
- } else {
- master_data &= ~0x3307;
- if (pio > 1)
- master_data = master_data | control;
- master_data = master_data | (timings[pio][0] << 12) | (timings[pio][1] << 8);
- }
- pci_write_config_word(dev, master_port, master_data);
- if (is_slave)
- pci_write_config_byte(dev, slave_port, slave_data);
- spin_unlock_irqrestore(&tune_lock, flags);
-}
-
-/**
- * it8213_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Tune the ITE chipset for the DMA mode.
- */
-
-static void it8213_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 maslave = 0x40;
- int a_speed = 3 << (drive->dn * 4);
- int u_flag = 1 << drive->dn;
- int v_flag = 0x01 << drive->dn;
- int w_flag = 0x10 << drive->dn;
- int u_speed = 0;
- u16 reg4042, reg4a;
- u8 reg48, reg54, reg55;
-
- pci_read_config_word(dev, maslave, &reg4042);
- pci_read_config_byte(dev, 0x48, &reg48);
- pci_read_config_word(dev, 0x4a, &reg4a);
- pci_read_config_byte(dev, 0x54, &reg54);
- pci_read_config_byte(dev, 0x55, &reg55);
-
- if (speed >= XFER_UDMA_0) {
- u8 udma = speed - XFER_UDMA_0;
-
- u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
-
- if (!(reg48 & u_flag))
- pci_write_config_byte(dev, 0x48, reg48 | u_flag);
- if (speed >= XFER_UDMA_5)
- pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
- else
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-
- if ((reg4a & a_speed) != u_speed)
- pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
- if (speed > XFER_UDMA_2) {
- if (!(reg54 & v_flag))
- pci_write_config_byte(dev, 0x54, reg54 | v_flag);
- } else
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- } else {
- const u8 mwdma_to_pio[] = { 0, 3, 4 };
- u8 pio;
-
- if (reg48 & u_flag)
- pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
- if (reg4a & a_speed)
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
- if (reg54 & v_flag)
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- if (reg55 & w_flag)
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-
- if (speed >= XFER_MW_DMA_0)
- pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
- else
- pio = 2; /* only SWDMA2 is allowed */
-
- it8213_set_pio_mode(drive, pio);
- }
-}
-
-static u8 it8213_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg42h = 0;
-
- pci_read_config_byte(dev, 0x42, &reg42h);
-
- return (reg42h & 0x02) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static const struct ide_port_ops it8213_port_ops = {
- .set_pio_mode = it8213_set_pio_mode,
- .set_dma_mode = it8213_set_dma_mode,
- .cable_detect = it8213_cable_detect,
-};
-
-static const struct ide_port_info it8213_chipset __devinitdata = {
- .name = DRV_NAME,
- .enablebits = { {0x41, 0x80, 0x80} },
- .port_ops = &it8213_port_ops,
- .host_flags = IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2_ONLY,
- .mwdma_mask = ATA_MWDMA12_ONLY,
- .udma_mask = ATA_UDMA6,
-};
-
-/**
- * it8213_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an ITE8213 controller. As
- * this device follows the standard interfaces we can use the
- * standard helper functions to do almost all the work for us.
- */
-
-static int __devinit it8213_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &it8213_chipset, NULL);
-}
-
-static const struct pci_device_id it8213_pci_tbl[] = {
- { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8213), 0 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, it8213_pci_tbl);
-
-static struct pci_driver it8213_pci_driver = {
- .name = "ITE8213_IDE",
- .id_table = it8213_pci_tbl,
- .probe = it8213_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init it8213_ide_init(void)
-{
- return ide_pci_register_driver(&it8213_pci_driver);
-}
-
-static void __exit it8213_ide_exit(void)
-{
- pci_unregister_driver(&it8213_pci_driver);
-}
-
-module_init(it8213_ide_init);
-module_exit(it8213_ide_exit);
-
-MODULE_AUTHOR("Jack Lee, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for the ITE 8213");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/it821x.c b/drivers/ide/pci/it821x.c
deleted file mode 100644
index 995e18bb3139..000000000000
--- a/drivers/ide/pci/it821x.c
+++ /dev/null
@@ -1,706 +0,0 @@
-/*
- * Copyright (C) 2004 Red Hat <alan@redhat.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- * Based in part on the ITE vendor provided SCSI driver.
- *
- * Documentation available from
- * http://www.ite.com.tw/pc/IT8212F_V04.pdf
- * Some other documents are NDA.
- *
- * The ITE8212 isn't exactly a standard IDE controller. It has two
- * modes. In pass through mode then it is an IDE controller. In its smart
- * mode its actually quite a capable hardware raid controller disguised
- * as an IDE controller. Smart mode only understands DMA read/write and
- * identify, none of the fancier commands apply. The IT8211 is identical
- * in other respects but lacks the raid mode.
- *
- * Errata:
- * o Rev 0x10 also requires master/slave hold the same DMA timings and
- * cannot do ATAPI MWDMA.
- * o The identify data for raid volumes lacks CHS info (technically ok)
- * but also fails to set the LBA28 and other bits. We fix these in
- * the IDE probe quirk code.
- * o If you write LBA48 sized I/O's (ie > 256 sector) in smart mode
- * raid then the controller firmware dies
- * o Smart mode without RAID doesn't clear all the necessary identify
- * bits to reduce the command set to the one used
- *
- * This has a few impacts on the driver
- * - In pass through mode we do all the work you would expect
- * - In smart mode the clocking set up is done by the controller generally
- * but we must watch the other limits and filter.
- * - There are a few extra vendor commands that actually talk to the
- * controller but only work PIO with no IRQ.
- *
- * Vendor areas of the identify block in smart mode are used for the
- * timing and policy set up. Each HDD in raid mode also has a serial
- * block on the disk. The hardware extra commands are get/set chip status,
- * rebuild, get rebuild status.
- *
- * In Linux the driver supports pass through mode as if the device was
- * just another IDE controller. If the smart mode is running then
- * volumes are managed by the controller firmware and each IDE "disk"
- * is a raid volume. Even more cute - the controller can do automated
- * hotplug and rebuild.
- *
- * The pass through controller itself is a little demented. It has a
- * flaw that it has a single set of PIO/MWDMA timings per channel so
- * non UDMA devices restrict each others performance. It also has a
- * single clock source per channel so mixed UDMA100/133 performance
- * isn't perfect and we have to pick a clock. Thankfully none of this
- * matters in smart mode. ATAPI DMA is not currently supported.
- *
- * It seems the smart mode is a win for RAID1/RAID10 but otherwise not.
- *
- * TODO
- * - ATAPI UDMA is ok but not MWDMA it seems
- * - RAID configuration ioctls
- * - Move to libata once it grows up
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "it821x"
-
-struct it821x_dev
-{
- unsigned int smart:1, /* Are we in smart raid mode */
- timing10:1; /* Rev 0x10 */
- u8 clock_mode; /* 0, ATA_50 or ATA_66 */
- u8 want[2][2]; /* Mode/Pri log for master slave */
- /* We need these for switching the clock when DMA goes on/off
- The high byte is the 66Mhz timing */
- u16 pio[2]; /* Cached PIO values */
- u16 mwdma[2]; /* Cached MWDMA values */
- u16 udma[2]; /* Cached UDMA values (per drive) */
-};
-
-#define ATA_66 0
-#define ATA_50 1
-#define ATA_ANY 2
-
-#define UDMA_OFF 0
-#define MWDMA_OFF 0
-
-/*
- * We allow users to force the card into non raid mode without
- * flashing the alternative BIOS. This is also necessary right now
- * for embedded platforms that cannot run a PC BIOS but are using this
- * device.
- */
-
-static int it8212_noraid;
-
-/**
- * it821x_program - program the PIO/MWDMA registers
- * @drive: drive to tune
- * @timing: timing info
- *
- * Program the PIO/MWDMA timing for this channel according to the
- * current clock.
- */
-
-static void it821x_program(ide_drive_t *drive, u16 timing)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int channel = hwif->channel;
- u8 conf;
-
- /* Program PIO/MWDMA timing bits */
- if(itdev->clock_mode == ATA_66)
- conf = timing >> 8;
- else
- conf = timing & 0xFF;
-
- pci_write_config_byte(dev, 0x54 + 4 * channel, conf);
-}
-
-/**
- * it821x_program_udma - program the UDMA registers
- * @drive: drive to tune
- * @timing: timing info
- *
- * Program the UDMA timing for this drive according to the
- * current clock.
- */
-
-static void it821x_program_udma(ide_drive_t *drive, u16 timing)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int channel = hwif->channel;
- u8 unit = drive->dn & 1, conf;
-
- /* Program UDMA timing bits */
- if(itdev->clock_mode == ATA_66)
- conf = timing >> 8;
- else
- conf = timing & 0xFF;
-
- if (itdev->timing10 == 0)
- pci_write_config_byte(dev, 0x56 + 4 * channel + unit, conf);
- else {
- pci_write_config_byte(dev, 0x56 + 4 * channel, conf);
- pci_write_config_byte(dev, 0x56 + 4 * channel + 1, conf);
- }
-}
-
-/**
- * it821x_clock_strategy
- * @drive: drive to set up
- *
- * Select between the 50 and 66Mhz base clocks to get the best
- * results for this interface.
- */
-
-static void it821x_clock_strategy(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- ide_drive_t *pair;
- int clock, altclock, sel = 0;
- u8 unit = drive->dn & 1, v;
-
- pair = &hwif->drives[1 - unit];
-
- if(itdev->want[0][0] > itdev->want[1][0]) {
- clock = itdev->want[0][1];
- altclock = itdev->want[1][1];
- } else {
- clock = itdev->want[1][1];
- altclock = itdev->want[0][1];
- }
-
- /*
- * if both clocks can be used for the mode with the higher priority
- * use the clock needed by the mode with the lower priority
- */
- if (clock == ATA_ANY)
- clock = altclock;
-
- /* Nobody cares - keep the same clock */
- if(clock == ATA_ANY)
- return;
- /* No change */
- if(clock == itdev->clock_mode)
- return;
-
- /* Load this into the controller ? */
- if(clock == ATA_66)
- itdev->clock_mode = ATA_66;
- else {
- itdev->clock_mode = ATA_50;
- sel = 1;
- }
-
- pci_read_config_byte(dev, 0x50, &v);
- v &= ~(1 << (1 + hwif->channel));
- v |= sel << (1 + hwif->channel);
- pci_write_config_byte(dev, 0x50, v);
-
- /*
- * Reprogram the UDMA/PIO of the pair drive for the switch
- * MWDMA will be dealt with by the dma switcher
- */
- if(pair && itdev->udma[1-unit] != UDMA_OFF) {
- it821x_program_udma(pair, itdev->udma[1-unit]);
- it821x_program(pair, itdev->pio[1-unit]);
- }
- /*
- * Reprogram the UDMA/PIO of our drive for the switch.
- * MWDMA will be dealt with by the dma switcher
- */
- if(itdev->udma[unit] != UDMA_OFF) {
- it821x_program_udma(drive, itdev->udma[unit]);
- it821x_program(drive, itdev->pio[unit]);
- }
-}
-
-/**
- * it821x_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Tune the host to the desired PIO mode taking into the consideration
- * the maximum PIO mode supported by the other device on the cable.
- */
-
-static void it821x_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- ide_drive_t *pair;
- u8 unit = drive->dn & 1, set_pio = pio;
-
- /* Spec says 89 ref driver uses 88 */
- static u16 pio_timings[]= { 0xAA88, 0xA382, 0xA181, 0x3332, 0x3121 };
- static u8 pio_want[] = { ATA_66, ATA_66, ATA_66, ATA_66, ATA_ANY };
-
- pair = &hwif->drives[1 - unit];
-
- /*
- * Compute the best PIO mode we can for a given device. We must
- * pick a speed that does not cause problems with the other device
- * on the cable.
- */
- if (pair) {
- u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
- /* trim PIO to the slowest of the master/slave */
- if (pair_pio < set_pio)
- set_pio = pair_pio;
- }
-
- /* We prefer 66Mhz clock for PIO 0-3, don't care for PIO4 */
- itdev->want[unit][1] = pio_want[set_pio];
- itdev->want[unit][0] = 1; /* PIO is lowest priority */
- itdev->pio[unit] = pio_timings[set_pio];
- it821x_clock_strategy(drive);
- it821x_program(drive, itdev->pio[unit]);
-}
-
-/**
- * it821x_tune_mwdma - tune a channel for MWDMA
- * @drive: drive to set up
- * @mode_wanted: the target operating mode
- *
- * Load the timing settings for this device mode into the
- * controller when doing MWDMA in pass through mode. The caller
- * must manage the whole lack of per device MWDMA/PIO timings and
- * the shared MWDMA/PIO timing register.
- */
-
-static void it821x_tune_mwdma (ide_drive_t *drive, byte mode_wanted)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = (void *)ide_get_hwifdata(hwif);
- u8 unit = drive->dn & 1, channel = hwif->channel, conf;
-
- static u16 dma[] = { 0x8866, 0x3222, 0x3121 };
- static u8 mwdma_want[] = { ATA_ANY, ATA_66, ATA_ANY };
-
- itdev->want[unit][1] = mwdma_want[mode_wanted];
- itdev->want[unit][0] = 2; /* MWDMA is low priority */
- itdev->mwdma[unit] = dma[mode_wanted];
- itdev->udma[unit] = UDMA_OFF;
-
- /* UDMA bits off - Revision 0x10 do them in pairs */
- pci_read_config_byte(dev, 0x50, &conf);
- if (itdev->timing10)
- conf |= channel ? 0x60: 0x18;
- else
- conf |= 1 << (3 + 2 * channel + unit);
- pci_write_config_byte(dev, 0x50, conf);
-
- it821x_clock_strategy(drive);
- /* FIXME: do we need to program this ? */
- /* it821x_program(drive, itdev->mwdma[unit]); */
-}
-
-/**
- * it821x_tune_udma - tune a channel for UDMA
- * @drive: drive to set up
- * @mode_wanted: the target operating mode
- *
- * Load the timing settings for this device mode into the
- * controller when doing UDMA modes in pass through.
- */
-
-static void it821x_tune_udma (ide_drive_t *drive, byte mode_wanted)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- u8 unit = drive->dn & 1, channel = hwif->channel, conf;
-
- static u16 udma[] = { 0x4433, 0x4231, 0x3121, 0x2121, 0x1111, 0x2211, 0x1111 };
- static u8 udma_want[] = { ATA_ANY, ATA_50, ATA_ANY, ATA_66, ATA_66, ATA_50, ATA_66 };
-
- itdev->want[unit][1] = udma_want[mode_wanted];
- itdev->want[unit][0] = 3; /* UDMA is high priority */
- itdev->mwdma[unit] = MWDMA_OFF;
- itdev->udma[unit] = udma[mode_wanted];
- if(mode_wanted >= 5)
- itdev->udma[unit] |= 0x8080; /* UDMA 5/6 select on */
-
- /* UDMA on. Again revision 0x10 must do the pair */
- pci_read_config_byte(dev, 0x50, &conf);
- if (itdev->timing10)
- conf &= channel ? 0x9F: 0xE7;
- else
- conf &= ~ (1 << (3 + 2 * channel + unit));
- pci_write_config_byte(dev, 0x50, conf);
-
- it821x_clock_strategy(drive);
- it821x_program_udma(drive, itdev->udma[unit]);
-
-}
-
-/**
- * it821x_dma_read - DMA hook
- * @drive: drive for DMA
- *
- * The IT821x has a single timing register for MWDMA and for PIO
- * operations. As we flip back and forth we have to reload the
- * clock. In addition the rev 0x10 device only works if the same
- * timing value is loaded into the master and slave UDMA clock
- * so we must also reload that.
- *
- * FIXME: we could figure out in advance if we need to do reloads
- */
-
-static void it821x_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- u8 unit = drive->dn & 1;
-
- if(itdev->mwdma[unit] != MWDMA_OFF)
- it821x_program(drive, itdev->mwdma[unit]);
- else if(itdev->udma[unit] != UDMA_OFF && itdev->timing10)
- it821x_program_udma(drive, itdev->udma[unit]);
- ide_dma_start(drive);
-}
-
-/**
- * it821x_dma_write - DMA hook
- * @drive: drive for DMA stop
- *
- * The IT821x has a single timing register for MWDMA and for PIO
- * operations. As we flip back and forth we have to reload the
- * clock.
- */
-
-static int it821x_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct it821x_dev *itdev = ide_get_hwifdata(hwif);
- int ret = ide_dma_end(drive);
- u8 unit = drive->dn & 1;
-
- if(itdev->mwdma[unit] != MWDMA_OFF)
- it821x_program(drive, itdev->pio[unit]);
- return ret;
-}
-
-/**
- * it821x_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Tune the ITE chipset for the desired DMA mode.
- */
-
-static void it821x_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- /*
- * MWDMA tuning is really hard because our MWDMA and PIO
- * timings are kept in the same place. We can switch in the
- * host dma on/off callbacks.
- */
- if (speed >= XFER_UDMA_0 && speed <= XFER_UDMA_6)
- it821x_tune_udma(drive, speed - XFER_UDMA_0);
- else if (speed >= XFER_MW_DMA_0 && speed <= XFER_MW_DMA_2)
- it821x_tune_mwdma(drive, speed - XFER_MW_DMA_0);
-}
-
-/**
- * it821x_cable_detect - cable detection
- * @hwif: interface to check
- *
- * Check for the presence of an ATA66 capable cable on the
- * interface. Problematic as it seems some cards don't have
- * the needed logic onboard.
- */
-
-static u8 it821x_cable_detect(ide_hwif_t *hwif)
-{
- /* The reference driver also only does disk side */
- return ATA_CBL_PATA80;
-}
-
-/**
- * it821x_quirkproc - post init callback
- * @drive: drive
- *
- * This callback is run after the drive has been probed but
- * before anything gets attached. It allows drivers to do any
- * final tuning that is needed, or fixups to work around bugs.
- */
-
-static void it821x_quirkproc(ide_drive_t *drive)
-{
- struct it821x_dev *itdev = ide_get_hwifdata(drive->hwif);
- u16 *id = drive->id;
-
- if (!itdev->smart) {
- /*
- * If we are in pass through mode then not much
- * needs to be done, but we do bother to clear the
- * IRQ mask as we may well be in PIO (eg rev 0x10)
- * for now and we know unmasking is safe on this chipset.
- */
- drive->dev_flags |= IDE_DFLAG_UNMASK;
- } else {
- /*
- * Perform fixups on smart mode. We need to "lose" some
- * capabilities the firmware lacks but does not filter, and
- * also patch up some capability bits that it forgets to set
- * in RAID mode.
- */
-
- /* Check for RAID v native */
- if (strstr((char *)&id[ATA_ID_PROD],
- "Integrated Technology Express")) {
- /* In raid mode the ident block is slightly buggy
- We need to set the bits so that the IDE layer knows
- LBA28. LBA48 and DMA ar valid */
- id[ATA_ID_CAPABILITY] |= (3 << 8); /* LBA28, DMA */
- id[ATA_ID_COMMAND_SET_2] |= 0x0400; /* LBA48 valid */
- id[ATA_ID_CFS_ENABLE_2] |= 0x0400; /* LBA48 on */
- /* Reporting logic */
- printk(KERN_INFO "%s: IT8212 %sRAID %d volume",
- drive->name, id[147] ? "Bootable " : "",
- id[ATA_ID_CSFO]);
- if (id[ATA_ID_CSFO] != 1)
- printk(KERN_CONT "(%dK stripe)", id[146]);
- printk(KERN_CONT ".\n");
- } else {
- /* Non RAID volume. Fixups to stop the core code
- doing unsupported things */
- id[ATA_ID_FIELD_VALID] &= 3;
- id[ATA_ID_QUEUE_DEPTH] = 0;
- id[ATA_ID_COMMAND_SET_1] = 0;
- id[ATA_ID_COMMAND_SET_2] &= 0xC400;
- id[ATA_ID_CFSSE] &= 0xC000;
- id[ATA_ID_CFS_ENABLE_1] = 0;
- id[ATA_ID_CFS_ENABLE_2] &= 0xC400;
- id[ATA_ID_CSF_DEFAULT] &= 0xC000;
- id[127] = 0;
- id[ATA_ID_DLF] = 0;
- id[ATA_ID_CSFO] = 0;
- id[ATA_ID_CFA_POWER] = 0;
- printk(KERN_INFO "%s: Performing identify fixups.\n",
- drive->name);
- }
-
- /*
- * Set MWDMA0 mode as enabled/support - just to tell
- * IDE core that DMA is supported (it821x hardware
- * takes care of DMA mode programming).
- */
- if (ata_id_has_dma(id)) {
- id[ATA_ID_MWDMA_MODES] |= 0x0101;
- drive->current_speed = XFER_MW_DMA_0;
- }
- }
-
-}
-
-static struct ide_dma_ops it821x_pass_through_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = it821x_dma_start,
- .dma_end = it821x_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_timeout = ide_dma_timeout,
- .dma_lost_irq = ide_dma_lost_irq,
-};
-
-/**
- * init_hwif_it821x - set up hwif structs
- * @hwif: interface to set up
- *
- * We do the basic set up of the interface structure. The IT8212
- * requires several custom handlers so we override the default
- * ide DMA handlers appropriately
- */
-
-static void __devinit init_hwif_it821x(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct it821x_dev *itdevs = host->host_priv;
- struct it821x_dev *idev = itdevs + hwif->channel;
- u8 conf;
-
- ide_set_hwifdata(hwif, idev);
-
- pci_read_config_byte(dev, 0x50, &conf);
- if (conf & 1) {
- idev->smart = 1;
- hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- /* Long I/O's although allowed in LBA48 space cause the
- onboard firmware to enter the twighlight zone */
- hwif->rqsize = 256;
- }
-
- /* Pull the current clocks from 0x50 also */
- if (conf & (1 << (1 + hwif->channel)))
- idev->clock_mode = ATA_50;
- else
- idev->clock_mode = ATA_66;
-
- idev->want[0][1] = ATA_ANY;
- idev->want[1][1] = ATA_ANY;
-
- /*
- * Not in the docs but according to the reference driver
- * this is necessary.
- */
-
- pci_read_config_byte(dev, 0x08, &conf);
- if (conf == 0x10) {
- idev->timing10 = 1;
- hwif->host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- if (idev->smart == 0)
- printk(KERN_WARNING DRV_NAME " %s: revision 0x10, "
- "workarounds activated\n", pci_name(dev));
- }
-
- if (idev->smart == 0) {
- /* MWDMA/PIO clock switching for pass through mode */
- hwif->dma_ops = &it821x_pass_through_dma_ops;
- } else
- hwif->host_flags |= IDE_HFLAG_NO_SET_MODE;
-
- if (hwif->dma_base == 0)
- return;
-
- hwif->ultra_mask = ATA_UDMA6;
- hwif->mwdma_mask = ATA_MWDMA2;
-}
-
-static void it8212_disable_raid(struct pci_dev *dev)
-{
- /* Reset local CPU, and set BIOS not ready */
- pci_write_config_byte(dev, 0x5E, 0x01);
-
- /* Set to bypass mode, and reset PCI bus */
- pci_write_config_byte(dev, 0x50, 0x00);
- pci_write_config_word(dev, PCI_COMMAND,
- PCI_COMMAND_PARITY | PCI_COMMAND_IO |
- PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
- pci_write_config_word(dev, 0x40, 0xA0F3);
-
- pci_write_config_dword(dev,0x4C, 0x02040204);
- pci_write_config_byte(dev, 0x42, 0x36);
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x20);
-}
-
-static unsigned int init_chipset_it821x(struct pci_dev *dev)
-{
- u8 conf;
- static char *mode[2] = { "pass through", "smart" };
-
- /* Force the card into bypass mode if so requested */
- if (it8212_noraid) {
- printk(KERN_INFO DRV_NAME " %s: forcing bypass mode\n",
- pci_name(dev));
- it8212_disable_raid(dev);
- }
- pci_read_config_byte(dev, 0x50, &conf);
- printk(KERN_INFO DRV_NAME " %s: controller in %s mode\n",
- pci_name(dev), mode[conf & 1]);
- return 0;
-}
-
-static const struct ide_port_ops it821x_port_ops = {
- /* it821x_set_{pio,dma}_mode() are only used in pass-through mode */
- .set_pio_mode = it821x_set_pio_mode,
- .set_dma_mode = it821x_set_dma_mode,
- .quirkproc = it821x_quirkproc,
- .cable_detect = it821x_cable_detect,
-};
-
-static const struct ide_port_info it821x_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_it821x,
- .init_hwif = init_hwif_it821x,
- .port_ops = &it821x_port_ops,
- .pio_mask = ATA_PIO4,
-};
-
-/**
- * it821x_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an ITE821x controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit it821x_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct it821x_dev *itdevs;
- int rc;
-
- itdevs = kzalloc(2 * sizeof(*itdevs), GFP_KERNEL);
- if (itdevs == NULL) {
- printk(KERN_ERR DRV_NAME " %s: out of memory\n", pci_name(dev));
- return -ENOMEM;
- }
-
- rc = ide_pci_init_one(dev, &it821x_chipset, itdevs);
- if (rc)
- kfree(itdevs);
-
- return rc;
-}
-
-static void __devexit it821x_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct it821x_dev *itdevs = host->host_priv;
-
- ide_pci_remove(dev);
- kfree(itdevs);
-}
-
-static const struct pci_device_id it821x_pci_tbl[] = {
- { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8211), 0 },
- { PCI_VDEVICE(ITE, PCI_DEVICE_ID_ITE_8212), 0 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, it821x_pci_tbl);
-
-static struct pci_driver it821x_pci_driver = {
- .name = "ITE821x IDE",
- .id_table = it821x_pci_tbl,
- .probe = it821x_init_one,
- .remove = __devexit_p(it821x_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init it821x_ide_init(void)
-{
- return ide_pci_register_driver(&it821x_pci_driver);
-}
-
-static void __exit it821x_ide_exit(void)
-{
- pci_unregister_driver(&it821x_pci_driver);
-}
-
-module_init(it821x_ide_init);
-module_exit(it821x_ide_exit);
-
-module_param_named(noraid, it8212_noraid, int, S_IRUGO);
-MODULE_PARM_DESC(noraid, "Force card into bypass mode");
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for the ITE 821x");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/jmicron.c b/drivers/ide/pci/jmicron.c
deleted file mode 100644
index 9a68433cf46d..000000000000
--- a/drivers/ide/pci/jmicron.c
+++ /dev/null
@@ -1,176 +0,0 @@
-
-/*
- * Copyright (C) 2006 Red Hat <alan@redhat.com>
- *
- * May be copied or modified under the terms of the GNU General Public License
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "jmicron"
-
-typedef enum {
- PORT_PATA0 = 0,
- PORT_PATA1 = 1,
- PORT_SATA = 2,
-} port_type;
-
-/**
- * jmicron_cable_detect - cable detection
- * @hwif: IDE port
- *
- * Returns the cable type.
- */
-
-static u8 jmicron_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
-
- u32 control;
- u32 control5;
-
- int port = hwif->channel;
- port_type port_map[2];
-
- pci_read_config_dword(pdev, 0x40, &control);
-
- /* There are two basic mappings. One has the two SATA ports merged
- as master/slave and the secondary as PATA, the other has only the
- SATA port mapped */
- if (control & (1 << 23)) {
- port_map[0] = PORT_SATA;
- port_map[1] = PORT_PATA0;
- } else {
- port_map[0] = PORT_SATA;
- port_map[1] = PORT_SATA;
- }
-
- /* The 365/366 may have this bit set to map the second PATA port
- as the internal primary channel */
- pci_read_config_dword(pdev, 0x80, &control5);
- if (control5 & (1<<24))
- port_map[0] = PORT_PATA1;
-
- /* The two ports may then be logically swapped by the firmware */
- if (control & (1 << 22))
- port = port ^ 1;
-
- /*
- * Now we know which physical port we are talking about we can
- * actually do our cable checking etc. Thankfully we don't need
- * to do the plumbing for other cases.
- */
- switch (port_map[port]) {
- case PORT_PATA0:
- if (control & (1 << 3)) /* 40/80 pin primary */
- return ATA_CBL_PATA40;
- return ATA_CBL_PATA80;
- case PORT_PATA1:
- if (control5 & (1 << 19)) /* 40/80 pin secondary */
- return ATA_CBL_PATA40;
- return ATA_CBL_PATA80;
- case PORT_SATA:
- break;
- }
- /* Avoid bogus "control reaches end of non-void function" */
- return ATA_CBL_PATA80;
-}
-
-static void jmicron_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
-}
-
-/**
- * jmicron_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @mode: DMA mode
- *
- * As the JMicron snoops for timings we don't need to do anything here.
- */
-
-static void jmicron_set_dma_mode(ide_drive_t *drive, const u8 mode)
-{
-}
-
-static const struct ide_port_ops jmicron_port_ops = {
- .set_pio_mode = jmicron_set_pio_mode,
- .set_dma_mode = jmicron_set_dma_mode,
- .cable_detect = jmicron_cable_detect,
-};
-
-static const struct ide_port_info jmicron_chipset __devinitdata = {
- .name = DRV_NAME,
- .enablebits = { { 0x40, 0x01, 0x01 }, { 0x40, 0x10, 0x10 } },
- .port_ops = &jmicron_port_ops,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA6,
-};
-
-/**
- * jmicron_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds a Jmicron controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit jmicron_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &jmicron_chipset, NULL);
-}
-
-/* All JMB PATA controllers have and will continue to have the same
- * interface. Matching vendor and device class is enough for all
- * current and future controllers if the controller is programmed
- * properly.
- *
- * If libata is configured, jmicron PCI quirk programs the controller
- * into the correct mode. If libata isn't configured, match known
- * device IDs too to maintain backward compatibility.
- */
-static struct pci_device_id jmicron_pci_tbl[] = {
-#if !defined(CONFIG_ATA) && !defined(CONFIG_ATA_MODULE)
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB361) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB363) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB365) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB366) },
- { PCI_VDEVICE(JMICRON, PCI_DEVICE_ID_JMICRON_JMB368) },
-#endif
- { PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
- PCI_CLASS_STORAGE_IDE << 8, 0xffff00, 0 },
- { 0, },
-};
-
-MODULE_DEVICE_TABLE(pci, jmicron_pci_tbl);
-
-static struct pci_driver jmicron_pci_driver = {
- .name = "JMicron IDE",
- .id_table = jmicron_pci_tbl,
- .probe = jmicron_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init jmicron_ide_init(void)
-{
- return ide_pci_register_driver(&jmicron_pci_driver);
-}
-
-static void __exit jmicron_ide_exit(void)
-{
- pci_unregister_driver(&jmicron_pci_driver);
-}
-
-module_init(jmicron_ide_init);
-module_exit(jmicron_ide_exit);
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for the JMicron in legacy modes");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/ns87415.c b/drivers/ide/pci/ns87415.c
deleted file mode 100644
index 13789060f407..000000000000
--- a/drivers/ide/pci/ns87415.c
+++ /dev/null
@@ -1,366 +0,0 @@
-/*
- * Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
- * Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
- * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2004 Grant Grundler <grundler at parisc-linux.org>
- *
- * Inspired by an earlier effort from David S. Miller <davem@redhat.com>
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/interrupt.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "ns87415"
-
-#ifdef CONFIG_SUPERIO
-/* SUPERIO 87560 is a PoS chip that NatSem denies exists.
- * Unfortunately, it's built-in on all Astro-based PA-RISC workstations
- * which use the integrated NS87514 cell for CD-ROM support.
- * i.e we have to support for CD-ROM installs.
- * See drivers/parisc/superio.c for more gory details.
- */
-#include <asm/superio.h>
-
-#define SUPERIO_IDE_MAX_RETRIES 25
-
-/* Because of a defect in Super I/O, all reads of the PCI DMA status
- * registers, IDE status register and the IDE select register need to be
- * retried
- */
-static u8 superio_ide_inb (unsigned long port)
-{
- u8 tmp;
- int retries = SUPERIO_IDE_MAX_RETRIES;
-
- /* printk(" [ reading port 0x%x with retry ] ", port); */
-
- do {
- tmp = inb(port);
- if (tmp == 0)
- udelay(50);
- } while (tmp == 0 && retries-- > 0);
-
- return tmp;
-}
-
-static u8 superio_read_status(ide_hwif_t *hwif)
-{
- return superio_ide_inb(hwif->io_ports.status_addr);
-}
-
-static u8 superio_read_sff_dma_status(ide_hwif_t *hwif)
-{
- return superio_ide_inb(hwif->dma_base + ATA_DMA_STATUS);
-}
-
-static void superio_tf_read(ide_drive_t *drive, ide_task_t *task)
-{
- struct ide_io_ports *io_ports = &drive->hwif->io_ports;
- struct ide_taskfile *tf = &task->tf;
-
- if (task->tf_flags & IDE_TFLAG_IN_DATA) {
- u16 data = inw(io_ports->data_addr);
-
- tf->data = data & 0xff;
- tf->hob_data = (data >> 8) & 0xff;
- }
-
- /* be sure we're looking at the low order bits */
- outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
-
- if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
- tf->feature = inb(io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = inb(io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = inb(io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = inb(io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = inb(io_ports->lbah_addr);
- if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = superio_ide_inb(io_ports->device_addr);
-
- if (task->tf_flags & IDE_TFLAG_LBA48) {
- outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
-
- if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
- tf->hob_feature = inb(io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = inb(io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = inb(io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = inb(io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = inb(io_ports->lbah_addr);
- }
-}
-
-static const struct ide_tp_ops superio_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = superio_read_status,
- .read_altstatus = ide_read_altstatus,
- .read_sff_dma_status = superio_read_sff_dma_status,
-
- .set_irq = ide_set_irq,
-
- .tf_load = ide_tf_load,
- .tf_read = superio_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static void __devinit superio_init_iops(struct hwif_s *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- u32 dma_stat;
- u8 port = hwif->channel, tmp;
-
- dma_stat = (pci_resource_start(pdev, 4) & ~3) + (!port ? 2 : 0xa);
-
- /* Clear error/interrupt, enable dma */
- tmp = superio_ide_inb(dma_stat);
- outb(tmp | 0x66, dma_stat);
-}
-#endif
-
-static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
-
-/*
- * This routine either enables/disables (according to IDE_DFLAG_PRESENT)
- * the IRQ associated with the port (HWIF(drive)),
- * and selects either PIO or DMA handshaking for the next I/O operation.
- */
-static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
- unsigned long flags;
-
- local_irq_save(flags);
- new = *old;
-
- /* Adjust IRQ enable bit */
- bit = 1 << (8 + hwif->channel);
-
- if (drive->dev_flags & IDE_DFLAG_PRESENT)
- new &= ~bit;
- else
- new |= bit;
-
- /* Select PIO or DMA, DMA may only be selected for one drive/channel. */
- bit = 1 << (20 + (drive->dn & 1) + (hwif->channel << 1));
- other = 1 << (20 + (1 - (drive->dn & 1)) + (hwif->channel << 1));
- new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
-
- if (new != *old) {
- unsigned char stat;
-
- /*
- * Don't change DMA engine settings while Write Buffers
- * are busy.
- */
- (void) pci_read_config_byte(dev, 0x43, &stat);
- while (stat & 0x03) {
- udelay(1);
- (void) pci_read_config_byte(dev, 0x43, &stat);
- }
-
- *old = new;
- (void) pci_write_config_dword(dev, 0x40, new);
-
- /*
- * And let things settle...
- */
- udelay(10);
- }
-
- local_irq_restore(flags);
-}
-
-static void ns87415_selectproc (ide_drive_t *drive)
-{
- ns87415_prepare_drive(drive,
- !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
-}
-
-static int ns87415_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat = 0, dma_cmd = 0;
-
- drive->waiting_for_dma = 0;
- dma_stat = hwif->tp_ops->read_sff_dma_status(hwif);
- /* get DMA command mode */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- /* stop DMA */
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- /* from ERRATA: clear the INTR & ERROR bits */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- outb(dma_cmd | 6, hwif->dma_base + ATA_DMA_CMD);
- /* and free any DMA resources */
- ide_destroy_dmatable(drive);
- /* verify good DMA status */
- return (dma_stat & 7) != 4;
-}
-
-static int ns87415_dma_setup(ide_drive_t *drive)
-{
- /* select DMA xfer */
- ns87415_prepare_drive(drive, 1);
- if (!ide_dma_setup(drive))
- return 0;
- /* DMA failed: select PIO xfer */
- ns87415_prepare_drive(drive, 0);
- return 1;
-}
-
-static void __devinit init_hwif_ns87415 (ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int ctrl, using_inta;
- u8 progif;
-#ifdef __sparc_v9__
- int timeout;
- u8 stat;
-#endif
-
- /*
- * We cannot probe for IRQ: both ports share common IRQ on INTA.
- * Also, leave IRQ masked during drive probing, to prevent infinite
- * interrupts from a potentially floating INTA..
- *
- * IRQs get unmasked in selectproc when drive is first used.
- */
- (void) pci_read_config_dword(dev, 0x40, &ctrl);
- (void) pci_read_config_byte(dev, 0x09, &progif);
- /* is irq in "native" mode? */
- using_inta = progif & (1 << (hwif->channel << 1));
- if (!using_inta)
- using_inta = ctrl & (1 << (4 + hwif->channel));
- if (hwif->mate) {
- hwif->select_data = hwif->mate->select_data;
- } else {
- hwif->select_data = (unsigned long)
- &ns87415_control[ns87415_count++];
- ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
- if (using_inta)
- ctrl &= ~(1 << 6); /* unmask INTA */
- *((unsigned int *)hwif->select_data) = ctrl;
- (void) pci_write_config_dword(dev, 0x40, ctrl);
-
- /*
- * Set prefetch size to 512 bytes for both ports,
- * but don't turn on/off prefetching here.
- */
- pci_write_config_byte(dev, 0x55, 0xee);
-
-#ifdef __sparc_v9__
- /*
- * XXX: Reset the device, if we don't it will not respond to
- * SELECT_DRIVE() properly during first ide_probe_port().
- */
- timeout = 10000;
- outb(12, hwif->io_ports.ctl_addr);
- udelay(10);
- outb(8, hwif->io_ports.ctl_addr);
- do {
- udelay(50);
- stat = hwif->tp_ops->read_status(hwif);
- if (stat == 0xff)
- break;
- } while ((stat & ATA_BUSY) && --timeout);
-#endif
- }
-
- if (!using_inta)
- hwif->irq = __ide_default_irq(hwif->io_ports.data_addr);
- else if (!hwif->irq && hwif->mate && hwif->mate->irq)
- hwif->irq = hwif->mate->irq; /* share IRQ with mate */
-
- if (!hwif->dma_base)
- return;
-
- outb(0x60, hwif->dma_base + ATA_DMA_STATUS);
-}
-
-static const struct ide_port_ops ns87415_port_ops = {
- .selectproc = ns87415_selectproc,
-};
-
-static const struct ide_dma_ops ns87415_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ns87415_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = ns87415_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info ns87415_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_ns87415,
- .port_ops = &ns87415_port_ops,
- .dma_ops = &ns87415_dma_ops,
- .host_flags = IDE_HFLAG_TRUST_BIOS_FOR_DMA |
- IDE_HFLAG_NO_ATAPI_DMA,
-};
-
-static int __devinit ns87415_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = ns87415_chipset;
-
-#ifdef CONFIG_SUPERIO
- if (PCI_SLOT(dev->devfn) == 0xE) {
- /* Built-in - assume it's under superio. */
- d.init_iops = superio_init_iops;
- d.tp_ops = &superio_tp_ops;
- }
-#endif
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id ns87415_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_87415), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, ns87415_pci_tbl);
-
-static struct pci_driver ns87415_pci_driver = {
- .name = "NS87415_IDE",
- .id_table = ns87415_pci_tbl,
- .probe = ns87415_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init ns87415_ide_init(void)
-{
- return ide_pci_register_driver(&ns87415_pci_driver);
-}
-
-static void __exit ns87415_ide_exit(void)
-{
- pci_unregister_driver(&ns87415_pci_driver);
-}
-
-module_init(ns87415_ide_init);
-module_exit(ns87415_ide_exit);
-
-MODULE_AUTHOR("Mark Lord, Eddie Dost, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for NS87415 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/opti621.c b/drivers/ide/pci/opti621.c
deleted file mode 100644
index 6048eda3cd61..000000000000
--- a/drivers/ide/pci/opti621.c
+++ /dev/null
@@ -1,247 +0,0 @@
-/*
- * Copyright (C) 1996-1998 Linus Torvalds & authors (see below)
- */
-
-/*
- * Authors:
- * Jaromir Koutek <miri@punknet.cz>,
- * Jan Harkes <jaharkes@cwi.nl>,
- * Mark Lord <mlord@pobox.com>
- * Some parts of code are from ali14xx.c and from rz1000.c.
- *
- * OPTi is trademark of OPTi, Octek is trademark of Octek.
- *
- * I used docs from OPTi databook, from ftp.opti.com, file 9123-0002.ps
- * and disassembled/traced setupvic.exe (DOS program).
- * It increases kernel code about 2 kB.
- * I don't have this card no more, but I hope I can get some in case
- * of needed development.
- * My card is Octek PIDE 1.01 (on card) or OPTiViC (program).
- * It has a place for a secondary connector in circuit, but nothing
- * is there. Also BIOS says no address for
- * secondary controller (see bellow in ide_init_opti621).
- * I've only tested this on my system, which only has one disk.
- * It's Western Digital WDAC2850, with PIO mode 3. The PCI bus
- * is at 20 MHz (I have DX2/80, I tried PCI at 40, but I got random
- * lockups). I tried the OCTEK double speed CD-ROM and
- * it does not work! But I can't boot DOS also, so it's probably
- * hardware fault. I have connected Conner 80MB, the Seagate 850MB (no
- * problems) and Seagate 1GB (as slave, WD as master). My experiences
- * with the third, 1GB drive: I got 3MB/s (hdparm), but sometimes
- * it slows to about 100kB/s! I don't know why and I have
- * not this drive now, so I can't try it again.
- * I write this driver because I lost the paper ("manual") with
- * settings of jumpers on the card and I have to boot Linux with
- * Loadlin except LILO, cause I have to run the setupvic.exe program
- * already or I get disk errors (my test: rpm -Vf
- * /usr/X11R6/bin/XF86_SVGA - or any big file).
- * Some numbers from hdparm -t /dev/hda:
- * Timing buffer-cache reads: 32 MB in 3.02 seconds =10.60 MB/sec
- * Timing buffered disk reads: 16 MB in 5.52 seconds = 2.90 MB/sec
- * I have 4 Megs/s before, but I don't know why (maybe changes
- * in hdparm test).
- * After release of 0.1, I got some successful reports, so it might work.
- *
- * The main problem with OPTi is that some timings for master
- * and slave must be the same. For example, if you have master
- * PIO 3 and slave PIO 0, driver have to set some timings of
- * master for PIO 0. Second problem is that opti621_set_pio_mode
- * got only one drive to set, but have to set both drives.
- * This is solved in compute_pios. If you don't set
- * the second drive, compute_pios use ide_get_best_pio_mode
- * for autoselect mode (you can change it to PIO 0, if you want).
- * If you then set the second drive to another PIO, the old value
- * (automatically selected) will be overrided by yours.
- * There is a 25/33MHz switch in configuration
- * register, but driver is written for use at any frequency.
- *
- * Version 0.1, Nov 8, 1996
- * by Jaromir Koutek, for 2.1.8.
- * Initial version of driver.
- *
- * Version 0.2
- * Number 0.2 skipped.
- *
- * Version 0.3, Nov 29, 1997
- * by Mark Lord (probably), for 2.1.68
- * Updates for use with new IDE block driver.
- *
- * Version 0.4, Dec 14, 1997
- * by Jan Harkes
- * Fixed some errors and cleaned the code.
- *
- * Version 0.5, Jan 2, 1998
- * by Jaromir Koutek
- * Updates for use with (again) new IDE block driver.
- * Update of documentation.
- *
- * Version 0.6, Jan 2, 1999
- * by Jaromir Koutek
- * Reversed to version 0.3 of the driver, because
- * 0.5 doesn't work.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "opti621"
-
-#define READ_REG 0 /* index of Read cycle timing register */
-#define WRITE_REG 1 /* index of Write cycle timing register */
-#define CNTRL_REG 3 /* index of Control register */
-#define STRAP_REG 5 /* index of Strap register */
-#define MISC_REG 6 /* index of Miscellaneous register */
-
-static int reg_base;
-
-static DEFINE_SPINLOCK(opti621_lock);
-
-/* Write value to register reg, base of register
- * is at reg_base (0x1f0 primary, 0x170 secondary,
- * if not changed by PCI configuration).
- * This is from setupvic.exe program.
- */
-static void write_reg(u8 value, int reg)
-{
- inw(reg_base + 1);
- inw(reg_base + 1);
- outb(3, reg_base + 2);
- outb(value, reg_base + reg);
- outb(0x83, reg_base + 2);
-}
-
-/* Read value from register reg, base of register
- * is at reg_base (0x1f0 primary, 0x170 secondary,
- * if not changed by PCI configuration).
- * This is from setupvic.exe program.
- */
-static u8 read_reg(int reg)
-{
- u8 ret = 0;
-
- inw(reg_base + 1);
- inw(reg_base + 1);
- outb(3, reg_base + 2);
- ret = inb(reg_base + reg);
- outb(0x83, reg_base + 2);
-
- return ret;
-}
-
-static void opti621_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *pair = ide_get_pair_dev(drive);
- unsigned long flags;
- u8 tim, misc, addr_pio = pio, clk;
-
- /* DRDY is default 2 (by OPTi Databook) */
- static const u8 addr_timings[2][5] = {
- { 0x20, 0x10, 0x00, 0x00, 0x00 }, /* 33 MHz */
- { 0x10, 0x10, 0x00, 0x00, 0x00 }, /* 25 MHz */
- };
- static const u8 data_rec_timings[2][5] = {
- { 0x5b, 0x45, 0x32, 0x21, 0x20 }, /* 33 MHz */
- { 0x48, 0x34, 0x21, 0x10, 0x10 } /* 25 MHz */
- };
-
- drive->drive_data = XFER_PIO_0 + pio;
-
- if (pair) {
- if (pair->drive_data && pair->drive_data < drive->drive_data)
- addr_pio = pair->drive_data - XFER_PIO_0;
- }
-
- spin_lock_irqsave(&opti621_lock, flags);
-
- reg_base = hwif->io_ports.data_addr;
-
- /* allow Register-B */
- outb(0xc0, reg_base + CNTRL_REG);
- /* hmm, setupvic.exe does this ;-) */
- outb(0xff, reg_base + 5);
- /* if reads 0xff, adapter not exist? */
- (void)inb(reg_base + CNTRL_REG);
- /* if reads 0xc0, no interface exist? */
- read_reg(CNTRL_REG);
-
- /* check CLK speed */
- clk = read_reg(STRAP_REG) & 1;
-
- printk(KERN_INFO "%s: CLK = %d MHz\n", hwif->name, clk ? 25 : 33);
-
- tim = data_rec_timings[clk][pio];
- misc = addr_timings[clk][addr_pio];
-
- /* select Index-0/1 for Register-A/B */
- write_reg(drive->dn & 1, MISC_REG);
- /* set read cycle timings */
- write_reg(tim, READ_REG);
- /* set write cycle timings */
- write_reg(tim, WRITE_REG);
-
- /* use Register-A for drive 0 */
- /* use Register-B for drive 1 */
- write_reg(0x85, CNTRL_REG);
-
- /* set address setup, DRDY timings, */
- /* and read prefetch for both drives */
- write_reg(misc, MISC_REG);
-
- spin_unlock_irqrestore(&opti621_lock, flags);
-}
-
-static const struct ide_port_ops opti621_port_ops = {
- .set_pio_mode = opti621_set_pio_mode,
-};
-
-static const struct ide_port_info opti621_chipset __devinitdata = {
- .name = DRV_NAME,
- .enablebits = { {0x45, 0x80, 0x00}, {0x40, 0x08, 0x00} },
- .port_ops = &opti621_port_ops,
- .host_flags = IDE_HFLAG_NO_DMA,
- .pio_mask = ATA_PIO4,
-};
-
-static int __devinit opti621_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &opti621_chipset, NULL);
-}
-
-static const struct pci_device_id opti621_pci_tbl[] = {
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C621), 0 },
- { PCI_VDEVICE(OPTI, PCI_DEVICE_ID_OPTI_82C825), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, opti621_pci_tbl);
-
-static struct pci_driver opti621_pci_driver = {
- .name = "Opti621_IDE",
- .id_table = opti621_pci_tbl,
- .probe = opti621_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init opti621_ide_init(void)
-{
- return ide_pci_register_driver(&opti621_pci_driver);
-}
-
-static void __exit opti621_ide_exit(void)
-{
- pci_unregister_driver(&opti621_pci_driver);
-}
-
-module_init(opti621_ide_init);
-module_exit(opti621_ide_exit);
-
-MODULE_AUTHOR("Jaromir Koutek, Jan Harkes, Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for Opti621 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/pdc202xx_new.c b/drivers/ide/pci/pdc202xx_new.c
deleted file mode 100644
index 211ae46e3e0c..000000000000
--- a/drivers/ide/pci/pdc202xx_new.c
+++ /dev/null
@@ -1,588 +0,0 @@
-/*
- * Promise TX2/TX4/TX2000/133 IDE driver
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- * Split from:
- * linux/drivers/ide/pdc202xx.c Version 0.35 Mar. 30, 2002
- * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2005-2007 MontaVista Software, Inc.
- * Portions Copyright (C) 1999 Promise Technology, Inc.
- * Author: Frank Tiernan (frankt@promise.com)
- * Released under terms of General Public License
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#ifdef CONFIG_PPC_PMAC
-#include <asm/prom.h>
-#include <asm/pci-bridge.h>
-#endif
-
-#define DRV_NAME "pdc202xx_new"
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(fmt, args...) printk("%s: " fmt, __func__, ## args)
-#else
-#define DBG(fmt, args...)
-#endif
-
-static const char *pdc_quirk_drives[] = {
- "QUANTUM FIREBALLlct08 08",
- "QUANTUM FIREBALLP KA6.4",
- "QUANTUM FIREBALLP KA9.1",
- "QUANTUM FIREBALLP LM20.4",
- "QUANTUM FIREBALLP KX13.6",
- "QUANTUM FIREBALLP KX20.5",
- "QUANTUM FIREBALLP KX27.3",
- "QUANTUM FIREBALLP LM20.5",
- NULL
-};
-
-static u8 max_dma_rate(struct pci_dev *pdev)
-{
- u8 mode;
-
- switch(pdev->device) {
- case PCI_DEVICE_ID_PROMISE_20277:
- case PCI_DEVICE_ID_PROMISE_20276:
- case PCI_DEVICE_ID_PROMISE_20275:
- case PCI_DEVICE_ID_PROMISE_20271:
- case PCI_DEVICE_ID_PROMISE_20269:
- mode = 4;
- break;
- case PCI_DEVICE_ID_PROMISE_20270:
- case PCI_DEVICE_ID_PROMISE_20268:
- mode = 3;
- break;
- default:
- return 0;
- }
-
- return mode;
-}
-
-/**
- * get_indexed_reg - Get indexed register
- * @hwif: for the port address
- * @index: index of the indexed register
- */
-static u8 get_indexed_reg(ide_hwif_t *hwif, u8 index)
-{
- u8 value;
-
- outb(index, hwif->dma_base + 1);
- value = inb(hwif->dma_base + 3);
-
- DBG("index[%02X] value[%02X]\n", index, value);
- return value;
-}
-
-/**
- * set_indexed_reg - Set indexed register
- * @hwif: for the port address
- * @index: index of the indexed register
- */
-static void set_indexed_reg(ide_hwif_t *hwif, u8 index, u8 value)
-{
- outb(index, hwif->dma_base + 1);
- outb(value, hwif->dma_base + 3);
- DBG("index[%02X] value[%02X]\n", index, value);
-}
-
-/*
- * ATA Timing Tables based on 133 MHz PLL output clock.
- *
- * If the PLL outputs 100 MHz clock, the ASIC hardware will set
- * the timing registers automatically when "set features" command is
- * issued to the device. However, if the PLL output clock is 133 MHz,
- * the following tables must be used.
- */
-static struct pio_timing {
- u8 reg0c, reg0d, reg13;
-} pio_timings [] = {
- { 0xfb, 0x2b, 0xac }, /* PIO mode 0, IORDY off, Prefetch off */
- { 0x46, 0x29, 0xa4 }, /* PIO mode 1, IORDY off, Prefetch off */
- { 0x23, 0x26, 0x64 }, /* PIO mode 2, IORDY off, Prefetch off */
- { 0x27, 0x0d, 0x35 }, /* PIO mode 3, IORDY on, Prefetch off */
- { 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
-};
-
-static struct mwdma_timing {
- u8 reg0e, reg0f;
-} mwdma_timings [] = {
- { 0xdf, 0x5f }, /* MWDMA mode 0 */
- { 0x6b, 0x27 }, /* MWDMA mode 1 */
- { 0x69, 0x25 }, /* MWDMA mode 2 */
-};
-
-static struct udma_timing {
- u8 reg10, reg11, reg12;
-} udma_timings [] = {
- { 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
- { 0x3a, 0x0a, 0xd0 }, /* UDMA mode 1 */
- { 0x2a, 0x07, 0xcd }, /* UDMA mode 2 */
- { 0x1a, 0x05, 0xcd }, /* UDMA mode 3 */
- { 0x1a, 0x03, 0xcd }, /* UDMA mode 4 */
- { 0x1a, 0x02, 0xcb }, /* UDMA mode 5 */
- { 0x1a, 0x01, 0xcb }, /* UDMA mode 6 */
-};
-
-static void pdcnew_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
-
- /*
- * IDE core issues SETFEATURES_XFER to the drive first (thanks to
- * IDE_HFLAG_POST_SET_MODE in ->host_flags). PDC202xx hardware will
- * automatically set the timing registers based on 100 MHz PLL output.
- *
- * As we set up the PLL to output 133 MHz for UltraDMA/133 capable
- * chips, we must override the default register settings...
- */
- if (max_dma_rate(dev) == 4) {
- u8 mode = speed & 0x07;
-
- if (speed >= XFER_UDMA_0) {
- set_indexed_reg(hwif, 0x10 + adj,
- udma_timings[mode].reg10);
- set_indexed_reg(hwif, 0x11 + adj,
- udma_timings[mode].reg11);
- set_indexed_reg(hwif, 0x12 + adj,
- udma_timings[mode].reg12);
- } else {
- set_indexed_reg(hwif, 0x0e + adj,
- mwdma_timings[mode].reg0e);
- set_indexed_reg(hwif, 0x0f + adj,
- mwdma_timings[mode].reg0f);
- }
- } else if (speed == XFER_UDMA_2) {
- /* Set tHOLD bit to 0 if using UDMA mode 2 */
- u8 tmp = get_indexed_reg(hwif, 0x10 + adj);
-
- set_indexed_reg(hwif, 0x10 + adj, tmp & 0x7f);
- }
-}
-
-static void pdcnew_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 adj = (drive->dn & 1) ? 0x08 : 0x00;
-
- if (max_dma_rate(dev) == 4) {
- set_indexed_reg(hwif, 0x0c + adj, pio_timings[pio].reg0c);
- set_indexed_reg(hwif, 0x0d + adj, pio_timings[pio].reg0d);
- set_indexed_reg(hwif, 0x13 + adj, pio_timings[pio].reg13);
- }
-}
-
-static u8 pdcnew_cable_detect(ide_hwif_t *hwif)
-{
- if (get_indexed_reg(hwif, 0x0b) & 0x04)
- return ATA_CBL_PATA40;
- else
- return ATA_CBL_PATA80;
-}
-
-static void pdcnew_quirkproc(ide_drive_t *drive)
-{
- const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
- for (list = pdc_quirk_drives; *list != NULL; list++)
- if (strstr(m, *list) != NULL) {
- drive->quirk_list = 2;
- return;
- }
-
- drive->quirk_list = 0;
-}
-
-static void pdcnew_reset(ide_drive_t *drive)
-{
- /*
- * Deleted this because it is redundant from the caller.
- */
- printk(KERN_WARNING "pdc202xx_new: %s channel reset.\n",
- HWIF(drive)->channel ? "Secondary" : "Primary");
-}
-
-/**
- * read_counter - Read the byte count registers
- * @dma_base: for the port address
- */
-static long read_counter(u32 dma_base)
-{
- u32 pri_dma_base = dma_base, sec_dma_base = dma_base + 0x08;
- u8 cnt0, cnt1, cnt2, cnt3;
- long count = 0, last;
- int retry = 3;
-
- do {
- last = count;
-
- /* Read the current count */
- outb(0x20, pri_dma_base + 0x01);
- cnt0 = inb(pri_dma_base + 0x03);
- outb(0x21, pri_dma_base + 0x01);
- cnt1 = inb(pri_dma_base + 0x03);
- outb(0x20, sec_dma_base + 0x01);
- cnt2 = inb(sec_dma_base + 0x03);
- outb(0x21, sec_dma_base + 0x01);
- cnt3 = inb(sec_dma_base + 0x03);
-
- count = (cnt3 << 23) | (cnt2 << 15) | (cnt1 << 8) | cnt0;
-
- /*
- * The 30-bit decrementing counter is read in 4 pieces.
- * Incorrect value may be read when the most significant bytes
- * are changing...
- */
- } while (retry-- && (((last ^ count) & 0x3fff8000) || last < count));
-
- DBG("cnt0[%02X] cnt1[%02X] cnt2[%02X] cnt3[%02X]\n",
- cnt0, cnt1, cnt2, cnt3);
-
- return count;
-}
-
-/**
- * detect_pll_input_clock - Detect the PLL input clock in Hz.
- * @dma_base: for the port address
- * E.g. 16949000 on 33 MHz PCI bus, i.e. half of the PCI clock.
- */
-static long detect_pll_input_clock(unsigned long dma_base)
-{
- struct timeval start_time, end_time;
- long start_count, end_count;
- long pll_input, usec_elapsed;
- u8 scr1;
-
- start_count = read_counter(dma_base);
- do_gettimeofday(&start_time);
-
- /* Start the test mode */
- outb(0x01, dma_base + 0x01);
- scr1 = inb(dma_base + 0x03);
- DBG("scr1[%02X]\n", scr1);
- outb(scr1 | 0x40, dma_base + 0x03);
-
- /* Let the counter run for 10 ms. */
- mdelay(10);
-
- end_count = read_counter(dma_base);
- do_gettimeofday(&end_time);
-
- /* Stop the test mode */
- outb(0x01, dma_base + 0x01);
- scr1 = inb(dma_base + 0x03);
- DBG("scr1[%02X]\n", scr1);
- outb(scr1 & ~0x40, dma_base + 0x03);
-
- /*
- * Calculate the input clock in Hz
- * (the clock counter is 30 bit wide and counts down)
- */
- usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 +
- (end_time.tv_usec - start_time.tv_usec);
- pll_input = ((start_count - end_count) & 0x3fffffff) / 10 *
- (10000000 / usec_elapsed);
-
- DBG("start[%ld] end[%ld]\n", start_count, end_count);
-
- return pll_input;
-}
-
-#ifdef CONFIG_PPC_PMAC
-static void apple_kiwi_init(struct pci_dev *pdev)
-{
- struct device_node *np = pci_device_to_OF_node(pdev);
- u8 conf;
-
- if (np == NULL || !of_device_is_compatible(np, "kiwi-root"))
- return;
-
- if (pdev->revision >= 0x03) {
- /* Setup chip magic config stuff (from darwin) */
- pci_read_config_byte (pdev, 0x40, &conf);
- pci_write_config_byte(pdev, 0x40, (conf | 0x01));
- }
-}
-#endif /* CONFIG_PPC_PMAC */
-
-static unsigned int init_chipset_pdcnew(struct pci_dev *dev)
-{
- const char *name = DRV_NAME;
- unsigned long dma_base = pci_resource_start(dev, 4);
- unsigned long sec_dma_base = dma_base + 0x08;
- long pll_input, pll_output, ratio;
- int f, r;
- u8 pll_ctl0, pll_ctl1;
-
- if (dma_base == 0)
- return -EFAULT;
-
-#ifdef CONFIG_PPC_PMAC
- apple_kiwi_init(dev);
-#endif
-
- /* Calculate the required PLL output frequency */
- switch(max_dma_rate(dev)) {
- case 4: /* it's 133 MHz for Ultra133 chips */
- pll_output = 133333333;
- break;
- case 3: /* and 100 MHz for Ultra100 chips */
- default:
- pll_output = 100000000;
- break;
- }
-
- /*
- * Detect PLL input clock.
- * On some systems, where PCI bus is running at non-standard clock rate
- * (e.g. 25 or 40 MHz), we have to adjust the cycle time.
- * PDC20268 and newer chips employ PLL circuit to help correct timing
- * registers setting.
- */
- pll_input = detect_pll_input_clock(dma_base);
- printk(KERN_INFO "%s %s: PLL input clock is %ld kHz\n",
- name, pci_name(dev), pll_input / 1000);
-
- /* Sanity check */
- if (unlikely(pll_input < 5000000L || pll_input > 70000000L)) {
- printk(KERN_ERR "%s %s: Bad PLL input clock %ld Hz, giving up!"
- "\n", name, pci_name(dev), pll_input);
- goto out;
- }
-
-#ifdef DEBUG
- DBG("pll_output is %ld Hz\n", pll_output);
-
- /* Show the current clock value of PLL control register
- * (maybe already configured by the BIOS)
- */
- outb(0x02, sec_dma_base + 0x01);
- pll_ctl0 = inb(sec_dma_base + 0x03);
- outb(0x03, sec_dma_base + 0x01);
- pll_ctl1 = inb(sec_dma_base + 0x03);
-
- DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
-#endif
-
- /*
- * Calculate the ratio of F, R and NO
- * POUT = (F + 2) / (( R + 2) * NO)
- */
- ratio = pll_output / (pll_input / 1000);
- if (ratio < 8600L) { /* 8.6x */
- /* Using NO = 0x01, R = 0x0d */
- r = 0x0d;
- } else if (ratio < 12900L) { /* 12.9x */
- /* Using NO = 0x01, R = 0x08 */
- r = 0x08;
- } else if (ratio < 16100L) { /* 16.1x */
- /* Using NO = 0x01, R = 0x06 */
- r = 0x06;
- } else if (ratio < 64000L) { /* 64x */
- r = 0x00;
- } else {
- /* Invalid ratio */
- printk(KERN_ERR "%s %s: Bad ratio %ld, giving up!\n",
- name, pci_name(dev), ratio);
- goto out;
- }
-
- f = (ratio * (r + 2)) / 1000 - 2;
-
- DBG("F[%d] R[%d] ratio*1000[%ld]\n", f, r, ratio);
-
- if (unlikely(f < 0 || f > 127)) {
- /* Invalid F */
- printk(KERN_ERR "%s %s: F[%d] invalid!\n",
- name, pci_name(dev), f);
- goto out;
- }
-
- pll_ctl0 = (u8) f;
- pll_ctl1 = (u8) r;
-
- DBG("Writing pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
-
- outb(0x02, sec_dma_base + 0x01);
- outb(pll_ctl0, sec_dma_base + 0x03);
- outb(0x03, sec_dma_base + 0x01);
- outb(pll_ctl1, sec_dma_base + 0x03);
-
- /* Wait the PLL circuit to be stable */
- mdelay(30);
-
-#ifdef DEBUG
- /*
- * Show the current clock value of PLL control register
- */
- outb(0x02, sec_dma_base + 0x01);
- pll_ctl0 = inb(sec_dma_base + 0x03);
- outb(0x03, sec_dma_base + 0x01);
- pll_ctl1 = inb(sec_dma_base + 0x03);
-
- DBG("pll_ctl[%02X][%02X]\n", pll_ctl0, pll_ctl1);
-#endif
-
- out:
- return dev->irq;
-}
-
-static struct pci_dev * __devinit pdc20270_get_dev2(struct pci_dev *dev)
-{
- struct pci_dev *dev2;
-
- dev2 = pci_get_slot(dev->bus, PCI_DEVFN(PCI_SLOT(dev->devfn) + 1,
- PCI_FUNC(dev->devfn)));
-
- if (dev2 &&
- dev2->vendor == dev->vendor &&
- dev2->device == dev->device) {
-
- if (dev2->irq != dev->irq) {
- dev2->irq = dev->irq;
- printk(KERN_INFO DRV_NAME " %s: PCI config space "
- "interrupt fixed\n", pci_name(dev));
- }
-
- return dev2;
- }
-
- return NULL;
-}
-
-static const struct ide_port_ops pdcnew_port_ops = {
- .set_pio_mode = pdcnew_set_pio_mode,
- .set_dma_mode = pdcnew_set_dma_mode,
- .quirkproc = pdcnew_quirkproc,
- .resetproc = pdcnew_reset,
- .cable_detect = pdcnew_cable_detect,
-};
-
-#define DECLARE_PDCNEW_DEV(udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_pdcnew, \
- .port_ops = &pdcnew_port_ops, \
- .host_flags = IDE_HFLAG_POST_SET_MODE | \
- IDE_HFLAG_ERROR_STOPS_FIFO | \
- IDE_HFLAG_OFF_BOARD, \
- .pio_mask = ATA_PIO4, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- }
-
-static const struct ide_port_info pdcnew_chipsets[] __devinitdata = {
- /* 0: PDC202{68,70} */ DECLARE_PDCNEW_DEV(ATA_UDMA5),
- /* 1: PDC202{69,71,75,76,77} */ DECLARE_PDCNEW_DEV(ATA_UDMA6),
-};
-
-/**
- * pdc202new_init_one - called when a pdc202xx is found
- * @dev: the pdc202new device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int __devinit pdc202new_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d = &pdcnew_chipsets[id->driver_data];
- struct pci_dev *bridge = dev->bus->self;
-
- if (dev->device == PCI_DEVICE_ID_PROMISE_20270 && bridge &&
- bridge->vendor == PCI_VENDOR_ID_DEC &&
- bridge->device == PCI_DEVICE_ID_DEC_21150) {
- struct pci_dev *dev2;
-
- if (PCI_SLOT(dev->devfn) & 2)
- return -ENODEV;
-
- dev2 = pdc20270_get_dev2(dev);
-
- if (dev2) {
- int ret = ide_pci_init_two(dev, dev2, d, NULL);
- if (ret < 0)
- pci_dev_put(dev2);
- return ret;
- }
- }
-
- if (dev->device == PCI_DEVICE_ID_PROMISE_20276 && bridge &&
- bridge->vendor == PCI_VENDOR_ID_INTEL &&
- (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
- bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO DRV_NAME " %s: attached to I2O RAID controller,"
- " skipping\n", pci_name(dev));
- return -ENODEV;
- }
-
- return ide_pci_init_one(dev, d, NULL);
-}
-
-static void __devexit pdc202new_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct pci_dev *dev2 = host->dev[1] ? to_pci_dev(host->dev[1]) : NULL;
-
- ide_pci_remove(dev);
- pci_dev_put(dev2);
-}
-
-static const struct pci_device_id pdc202new_pci_tbl[] = {
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20268), 0 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20269), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20270), 0 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20271), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20275), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20276), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20277), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, pdc202new_pci_tbl);
-
-static struct pci_driver pdc202new_pci_driver = {
- .name = "Promise_IDE",
- .id_table = pdc202new_pci_tbl,
- .probe = pdc202new_init_one,
- .remove = __devexit_p(pdc202new_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init pdc202new_ide_init(void)
-{
- return ide_pci_register_driver(&pdc202new_pci_driver);
-}
-
-static void __exit pdc202new_ide_exit(void)
-{
- pci_unregister_driver(&pdc202new_pci_driver);
-}
-
-module_init(pdc202new_ide_init);
-module_exit(pdc202new_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
-MODULE_DESCRIPTION("PCI driver module for Promise PDC20268 and higher");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/pdc202xx_old.c b/drivers/ide/pci/pdc202xx_old.c
deleted file mode 100644
index 799557c25eef..000000000000
--- a/drivers/ide/pci/pdc202xx_old.c
+++ /dev/null
@@ -1,453 +0,0 @@
-/*
- * Copyright (C) 1998-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2006-2007 MontaVista Software, Inc.
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * Portions Copyright (C) 1999 Promise Technology, Inc.
- * Author: Frank Tiernan (frankt@promise.com)
- * Released under terms of General Public License
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/blkdev.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "pdc202xx_old"
-
-#define PDC202XX_DEBUG_DRIVE_INFO 0
-
-static const char *pdc_quirk_drives[] = {
- "QUANTUM FIREBALLlct08 08",
- "QUANTUM FIREBALLP KA6.4",
- "QUANTUM FIREBALLP KA9.1",
- "QUANTUM FIREBALLP LM20.4",
- "QUANTUM FIREBALLP KX13.6",
- "QUANTUM FIREBALLP KX20.5",
- "QUANTUM FIREBALLP KX27.3",
- "QUANTUM FIREBALLP LM20.5",
- NULL
-};
-
-static void pdc_old_disable_66MHz_clock(ide_hwif_t *);
-
-static void pdc202xx_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 drive_pci = 0x60 + (drive->dn << 2);
-
- u8 AP = 0, BP = 0, CP = 0;
- u8 TA = 0, TB = 0, TC = 0;
-
-#if PDC202XX_DEBUG_DRIVE_INFO
- u32 drive_conf = 0;
- pci_read_config_dword(dev, drive_pci, &drive_conf);
-#endif
-
- /*
- * TODO: do this once per channel
- */
- if (dev->device != PCI_DEVICE_ID_PROMISE_20246)
- pdc_old_disable_66MHz_clock(hwif);
-
- pci_read_config_byte(dev, drive_pci, &AP);
- pci_read_config_byte(dev, drive_pci + 1, &BP);
- pci_read_config_byte(dev, drive_pci + 2, &CP);
-
- switch(speed) {
- case XFER_UDMA_5:
- case XFER_UDMA_4: TB = 0x20; TC = 0x01; break;
- case XFER_UDMA_2: TB = 0x20; TC = 0x01; break;
- case XFER_UDMA_3:
- case XFER_UDMA_1: TB = 0x40; TC = 0x02; break;
- case XFER_UDMA_0:
- case XFER_MW_DMA_2: TB = 0x60; TC = 0x03; break;
- case XFER_MW_DMA_1: TB = 0x60; TC = 0x04; break;
- case XFER_MW_DMA_0: TB = 0xE0; TC = 0x0F; break;
- case XFER_PIO_4: TA = 0x01; TB = 0x04; break;
- case XFER_PIO_3: TA = 0x02; TB = 0x06; break;
- case XFER_PIO_2: TA = 0x03; TB = 0x08; break;
- case XFER_PIO_1: TA = 0x05; TB = 0x0C; break;
- case XFER_PIO_0:
- default: TA = 0x09; TB = 0x13; break;
- }
-
- if (speed < XFER_SW_DMA_0) {
- /*
- * preserve SYNC_INT / ERDDY_EN bits while clearing
- * Prefetch_EN / IORDY_EN / PA[3:0] bits of register A
- */
- AP &= ~0x3f;
- if (ata_id_iordy_disable(drive->id))
- AP |= 0x20; /* set IORDY_EN bit */
- if (drive->media == ide_disk)
- AP |= 0x10; /* set Prefetch_EN bit */
- /* clear PB[4:0] bits of register B */
- BP &= ~0x1f;
- pci_write_config_byte(dev, drive_pci, AP | TA);
- pci_write_config_byte(dev, drive_pci + 1, BP | TB);
- } else {
- /* clear MB[2:0] bits of register B */
- BP &= ~0xe0;
- /* clear MC[3:0] bits of register C */
- CP &= ~0x0f;
- pci_write_config_byte(dev, drive_pci + 1, BP | TB);
- pci_write_config_byte(dev, drive_pci + 2, CP | TC);
- }
-
-#if PDC202XX_DEBUG_DRIVE_INFO
- printk(KERN_DEBUG "%s: %s drive%d 0x%08x ",
- drive->name, ide_xfer_verbose(speed),
- drive->dn, drive_conf);
- pci_read_config_dword(dev, drive_pci, &drive_conf);
- printk("0x%08x\n", drive_conf);
-#endif
-}
-
-static void pdc202xx_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- pdc202xx_set_mode(drive, XFER_PIO_0 + pio);
-}
-
-static u8 pdc2026x_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 CIS, mask = hwif->channel ? (1 << 11) : (1 << 10);
-
- pci_read_config_word(dev, 0x50, &CIS);
-
- return (CIS & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-/*
- * Set the control register to use the 66MHz system
- * clock for UDMA 3/4/5 mode operation when necessary.
- *
- * FIXME: this register is shared by both channels, some locking is needed
- *
- * It may also be possible to leave the 66MHz clock on
- * and readjust the timing parameters.
- */
-static void pdc_old_enable_66MHz_clock(ide_hwif_t *hwif)
-{
- unsigned long clock_reg = hwif->extra_base + 0x01;
- u8 clock = inb(clock_reg);
-
- outb(clock | (hwif->channel ? 0x08 : 0x02), clock_reg);
-}
-
-static void pdc_old_disable_66MHz_clock(ide_hwif_t *hwif)
-{
- unsigned long clock_reg = hwif->extra_base + 0x01;
- u8 clock = inb(clock_reg);
-
- outb(clock & ~(hwif->channel ? 0x08 : 0x02), clock_reg);
-}
-
-static void pdc202xx_quirkproc(ide_drive_t *drive)
-{
- const char **list, *m = (char *)&drive->id[ATA_ID_PROD];
-
- for (list = pdc_quirk_drives; *list != NULL; list++)
- if (strstr(m, *list) != NULL) {
- drive->quirk_list = 2;
- return;
- }
-
- drive->quirk_list = 0;
-}
-
-static void pdc202xx_dma_start(ide_drive_t *drive)
-{
- if (drive->current_speed > XFER_UDMA_2)
- pdc_old_enable_66MHz_clock(drive->hwif);
- if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
- struct request *rq = HWGROUP(drive)->rq;
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->extra_base - 16;
- unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
- u32 word_count = 0;
- u8 clock = inb(high_16 + 0x11);
-
- outb(clock | (hwif->channel ? 0x08 : 0x02), high_16 + 0x11);
- word_count = (rq->nr_sectors << 8);
- word_count = (rq_data_dir(rq) == READ) ?
- word_count | 0x05000000 :
- word_count | 0x06000000;
- outl(word_count, atapi_reg);
- }
- ide_dma_start(drive);
-}
-
-static int pdc202xx_dma_end(ide_drive_t *drive)
-{
- if (drive->media != ide_disk || (drive->dev_flags & IDE_DFLAG_LBA48)) {
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->extra_base - 16;
- unsigned long atapi_reg = high_16 + (hwif->channel ? 0x24 : 0x20);
- u8 clock = 0;
-
- outl(0, atapi_reg); /* zero out extra */
- clock = inb(high_16 + 0x11);
- outb(clock & ~(hwif->channel ? 0x08:0x02), high_16 + 0x11);
- }
- if (drive->current_speed > XFER_UDMA_2)
- pdc_old_disable_66MHz_clock(drive->hwif);
- return ide_dma_end(drive);
-}
-
-static int pdc202xx_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long high_16 = hwif->extra_base - 16;
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- u8 sc1d = inb(high_16 + 0x001d);
-
- if (hwif->channel) {
- /* bit7: Error, bit6: Interrupting, bit5: FIFO Full, bit4: FIFO Empty */
- if ((sc1d & 0x50) == 0x50)
- goto somebody_else;
- else if ((sc1d & 0x40) == 0x40)
- return (dma_stat & 4) == 4;
- } else {
- /* bit3: Error, bit2: Interrupting, bit1: FIFO Full, bit0: FIFO Empty */
- if ((sc1d & 0x05) == 0x05)
- goto somebody_else;
- else if ((sc1d & 0x04) == 0x04)
- return (dma_stat & 4) == 4;
- }
-somebody_else:
- return (dma_stat & 4) == 4; /* return 1 if INTR asserted */
-}
-
-static void pdc202xx_reset_host (ide_hwif_t *hwif)
-{
- unsigned long high_16 = hwif->extra_base - 16;
- u8 udma_speed_flag = inb(high_16 | 0x001f);
-
- outb(udma_speed_flag | 0x10, high_16 | 0x001f);
- mdelay(100);
- outb(udma_speed_flag & ~0x10, high_16 | 0x001f);
- mdelay(2000); /* 2 seconds ?! */
-
- printk(KERN_WARNING "PDC202XX: %s channel reset.\n",
- hwif->channel ? "Secondary" : "Primary");
-}
-
-static void pdc202xx_reset (ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- ide_hwif_t *mate = hwif->mate;
-
- pdc202xx_reset_host(hwif);
- pdc202xx_reset_host(mate);
-
- ide_set_max_pio(drive);
-}
-
-static void pdc202xx_dma_lost_irq(ide_drive_t *drive)
-{
- pdc202xx_reset(drive);
- ide_dma_lost_irq(drive);
-}
-
-static void pdc202xx_dma_timeout(ide_drive_t *drive)
-{
- pdc202xx_reset(drive);
- ide_dma_timeout(drive);
-}
-
-static unsigned int init_chipset_pdc202xx(struct pci_dev *dev)
-{
- unsigned long dmabase = pci_resource_start(dev, 4);
- u8 udma_speed_flag = 0, primary_mode = 0, secondary_mode = 0;
-
- if (dmabase == 0)
- goto out;
-
- udma_speed_flag = inb(dmabase | 0x1f);
- primary_mode = inb(dmabase | 0x1a);
- secondary_mode = inb(dmabase | 0x1b);
- printk(KERN_INFO "%s: (U)DMA Burst Bit %sABLED " \
- "Primary %s Mode " \
- "Secondary %s Mode.\n", pci_name(dev),
- (udma_speed_flag & 1) ? "EN" : "DIS",
- (primary_mode & 1) ? "MASTER" : "PCI",
- (secondary_mode & 1) ? "MASTER" : "PCI" );
-
- if (!(udma_speed_flag & 1)) {
- printk(KERN_INFO "%s: FORCING BURST BIT 0x%02x->0x%02x ",
- pci_name(dev), udma_speed_flag,
- (udma_speed_flag|1));
- outb(udma_speed_flag | 1, dmabase | 0x1f);
- printk("%sACTIVE\n", (inb(dmabase | 0x1f) & 1) ? "" : "IN");
- }
-out:
- return dev->irq;
-}
-
-static void __devinit pdc202ata4_fixup_irq(struct pci_dev *dev,
- const char *name)
-{
- if ((dev->class >> 8) != PCI_CLASS_STORAGE_IDE) {
- u8 irq = 0, irq2 = 0;
- pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
- /* 0xbc */
- pci_read_config_byte(dev, (PCI_INTERRUPT_LINE)|0x80, &irq2);
- if (irq != irq2) {
- pci_write_config_byte(dev,
- (PCI_INTERRUPT_LINE)|0x80, irq); /* 0xbc */
- printk(KERN_INFO "%s %s: PCI config space interrupt "
- "mirror fixed\n", name, pci_name(dev));
- }
- }
-}
-
-#define IDE_HFLAGS_PDC202XX \
- (IDE_HFLAG_ERROR_STOPS_FIFO | \
- IDE_HFLAG_OFF_BOARD)
-
-static const struct ide_port_ops pdc20246_port_ops = {
- .set_pio_mode = pdc202xx_set_pio_mode,
- .set_dma_mode = pdc202xx_set_mode,
- .quirkproc = pdc202xx_quirkproc,
-};
-
-static const struct ide_port_ops pdc2026x_port_ops = {
- .set_pio_mode = pdc202xx_set_pio_mode,
- .set_dma_mode = pdc202xx_set_mode,
- .quirkproc = pdc202xx_quirkproc,
- .resetproc = pdc202xx_reset,
- .cable_detect = pdc2026x_cable_detect,
-};
-
-static const struct ide_dma_ops pdc20246_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = pdc202xx_dma_test_irq,
- .dma_lost_irq = pdc202xx_dma_lost_irq,
- .dma_timeout = pdc202xx_dma_timeout,
-};
-
-static const struct ide_dma_ops pdc2026x_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = pdc202xx_dma_start,
- .dma_end = pdc202xx_dma_end,
- .dma_test_irq = pdc202xx_dma_test_irq,
- .dma_lost_irq = pdc202xx_dma_lost_irq,
- .dma_timeout = pdc202xx_dma_timeout,
-};
-
-#define DECLARE_PDC2026X_DEV(udma, extra_flags) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_pdc202xx, \
- .port_ops = &pdc2026x_port_ops, \
- .dma_ops = &pdc2026x_dma_ops, \
- .host_flags = IDE_HFLAGS_PDC202XX | extra_flags, \
- .pio_mask = ATA_PIO4, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = udma, \
- }
-
-static const struct ide_port_info pdc202xx_chipsets[] __devinitdata = {
- { /* 0: PDC20246 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_pdc202xx,
- .port_ops = &pdc20246_port_ops,
- .dma_ops = &pdc20246_dma_ops,
- .host_flags = IDE_HFLAGS_PDC202XX,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
- },
-
- /* 1: PDC2026{2,3} */
- DECLARE_PDC2026X_DEV(ATA_UDMA4, 0),
- /* 2: PDC2026{5,7} */
- DECLARE_PDC2026X_DEV(ATA_UDMA5, IDE_HFLAG_RQSIZE_256),
-};
-
-/**
- * pdc202xx_init_one - called when a PDC202xx is found
- * @dev: the pdc202xx device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int __devinit pdc202xx_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- const struct ide_port_info *d;
- u8 idx = id->driver_data;
-
- d = &pdc202xx_chipsets[idx];
-
- if (idx < 2)
- pdc202ata4_fixup_irq(dev, d->name);
-
- if (dev->vendor == PCI_DEVICE_ID_PROMISE_20265) {
- struct pci_dev *bridge = dev->bus->self;
-
- if (bridge &&
- bridge->vendor == PCI_VENDOR_ID_INTEL &&
- (bridge->device == PCI_DEVICE_ID_INTEL_I960 ||
- bridge->device == PCI_DEVICE_ID_INTEL_I960RM)) {
- printk(KERN_INFO DRV_NAME " %s: skipping Promise "
- "PDC20265 attached to I2O RAID controller\n",
- pci_name(dev));
- return -ENODEV;
- }
- }
-
- return ide_pci_init_one(dev, d, NULL);
-}
-
-static const struct pci_device_id pdc202xx_pci_tbl[] = {
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20246), 0 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20262), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20263), 1 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20265), 2 },
- { PCI_VDEVICE(PROMISE, PCI_DEVICE_ID_PROMISE_20267), 2 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, pdc202xx_pci_tbl);
-
-static struct pci_driver pdc202xx_pci_driver = {
- .name = "Promise_Old_IDE",
- .id_table = pdc202xx_pci_tbl,
- .probe = pdc202xx_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init pdc202xx_ide_init(void)
-{
- return ide_pci_register_driver(&pdc202xx_pci_driver);
-}
-
-static void __exit pdc202xx_ide_exit(void)
-{
- pci_unregister_driver(&pdc202xx_pci_driver);
-}
-
-module_init(pdc202xx_ide_init);
-module_exit(pdc202xx_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Frank Tiernan");
-MODULE_DESCRIPTION("PCI driver module for older Promise IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/piix.c b/drivers/ide/pci/piix.c
deleted file mode 100644
index d63f9fdca76b..000000000000
--- a/drivers/ide/pci/piix.c
+++ /dev/null
@@ -1,480 +0,0 @@
-/*
- * Copyright (C) 1998-1999 Andrzej Krzysztofowicz, Author and Maintainer
- * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat Inc <alan@redhat.com>
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Documentation:
- *
- * Publically available from Intel web site. Errata documentation
- * is also publically available. As an aide to anyone hacking on this
- * driver the list of errata that are relevant is below.going back to
- * PIIX4. Older device documentation is now a bit tricky to find.
- *
- * Errata of note:
- *
- * Unfixable
- * PIIX4 errata #9 - Only on ultra obscure hw
- * ICH3 errata #13 - Not observed to affect real hw
- * by Intel
- *
- * Things we must deal with
- * PIIX4 errata #10 - BM IDE hang with non UDMA
- * (must stop/start dma to recover)
- * 440MX errata #15 - As PIIX4 errata #10
- * PIIX4 errata #15 - Must not read control registers
- * during a PIO transfer
- * 440MX errata #13 - As PIIX4 errata #15
- * ICH2 errata #21 - DMA mode 0 doesn't work right
- * ICH0/1 errata #55 - As ICH2 errata #21
- * ICH2 spec c #9 - Extra operations needed to handle
- * drive hotswap [NOT YET SUPPORTED]
- * ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
- * and must be dword aligned
- * ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
- *
- * Should have been BIOS fixed:
- * 450NX: errata #19 - DMA hangs on old 450NX
- * 450NX: errata #20 - DMA hangs on old 450NX
- * 450NX: errata #25 - Corruption with DMA on old 450NX
- * ICH3 errata #15 - IDE deadlock under high load
- * (BIOS must set dev 31 fn 0 bit 23)
- * ICH3 errata #18 - Don't use native mode
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "piix"
-
-static int no_piix_dma;
-
-/**
- * piix_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Set the interface PIO mode based upon the settings done by AMI BIOS.
- */
-
-static void piix_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int is_slave = drive->dn & 1;
- int master_port = hwif->channel ? 0x42 : 0x40;
- int slave_port = 0x44;
- unsigned long flags;
- u16 master_data;
- u8 slave_data;
- static DEFINE_SPINLOCK(tune_lock);
- int control = 0;
-
- /* ISP RTC */
- static const u8 timings[][2]= {
- { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- /*
- * Master vs slave is synchronized above us but the slave register is
- * shared by the two hwifs so the corner case of two slave timeouts in
- * parallel must be locked.
- */
- spin_lock_irqsave(&tune_lock, flags);
- pci_read_config_word(dev, master_port, &master_data);
-
- if (pio > 1)
- control |= 1; /* Programmable timing on */
- if (drive->media == ide_disk)
- control |= 4; /* Prefetch, post write */
- if (pio > 2)
- control |= 2; /* IORDY */
- if (is_slave) {
- master_data |= 0x4000;
- master_data &= ~0x0070;
- if (pio > 1) {
- /* Set PPE, IE and TIME */
- master_data |= control << 4;
- }
- pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data &= hwif->channel ? 0x0f : 0xf0;
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
- (hwif->channel ? 4 : 0);
- } else {
- master_data &= ~0x3307;
- if (pio > 1) {
- /* enable PPE, IE and TIME */
- master_data |= control;
- }
- master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
- }
- pci_write_config_word(dev, master_port, master_data);
- if (is_slave)
- pci_write_config_byte(dev, slave_port, slave_data);
- spin_unlock_irqrestore(&tune_lock, flags);
-}
-
-/**
- * piix_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Set a PIIX host controller to the desired DMA mode. This involves
- * programming the right timing data into the PCI configuration space.
- */
-
-static void piix_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 maslave = hwif->channel ? 0x42 : 0x40;
- int a_speed = 3 << (drive->dn * 4);
- int u_flag = 1 << drive->dn;
- int v_flag = 0x01 << drive->dn;
- int w_flag = 0x10 << drive->dn;
- int u_speed = 0;
- int sitre;
- u16 reg4042, reg4a;
- u8 reg48, reg54, reg55;
-
- pci_read_config_word(dev, maslave, &reg4042);
- sitre = (reg4042 & 0x4000) ? 1 : 0;
- pci_read_config_byte(dev, 0x48, &reg48);
- pci_read_config_word(dev, 0x4a, &reg4a);
- pci_read_config_byte(dev, 0x54, &reg54);
- pci_read_config_byte(dev, 0x55, &reg55);
-
- if (speed >= XFER_UDMA_0) {
- u8 udma = speed - XFER_UDMA_0;
-
- u_speed = min_t(u8, 2 - (udma & 1), udma) << (drive->dn * 4);
-
- if (!(reg48 & u_flag))
- pci_write_config_byte(dev, 0x48, reg48 | u_flag);
- if (speed == XFER_UDMA_5) {
- pci_write_config_byte(dev, 0x55, (u8) reg55|w_flag);
- } else {
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
- }
- if ((reg4a & a_speed) != u_speed)
- pci_write_config_word(dev, 0x4a, (reg4a & ~a_speed) | u_speed);
- if (speed > XFER_UDMA_2) {
- if (!(reg54 & v_flag))
- pci_write_config_byte(dev, 0x54, reg54 | v_flag);
- } else
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- } else {
- const u8 mwdma_to_pio[] = { 0, 3, 4 };
- u8 pio;
-
- if (reg48 & u_flag)
- pci_write_config_byte(dev, 0x48, reg48 & ~u_flag);
- if (reg4a & a_speed)
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
- if (reg54 & v_flag)
- pci_write_config_byte(dev, 0x54, reg54 & ~v_flag);
- if (reg55 & w_flag)
- pci_write_config_byte(dev, 0x55, (u8) reg55 & ~w_flag);
-
- if (speed >= XFER_MW_DMA_0)
- pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
- else
- pio = 2; /* only SWDMA2 is allowed */
-
- piix_set_pio_mode(drive, pio);
- }
-}
-
-/**
- * init_chipset_ich - set up the ICH chipset
- * @dev: PCI device to set up
- *
- * Initialize the PCI device as required. For the ICH this turns
- * out to be nice and simple.
- */
-
-static unsigned int init_chipset_ich(struct pci_dev *dev)
-{
- u32 extra = 0;
-
- pci_read_config_dword(dev, 0x54, &extra);
- pci_write_config_dword(dev, 0x54, extra | 0x400);
-
- return 0;
-}
-
-/**
- * ich_clear_irq - clear BMDMA status
- * @drive: IDE drive
- *
- * ICHx contollers set DMA INTR no matter DMA or PIO.
- * BMDMA status might need to be cleared even for
- * PIO interrupts to prevent spurious/lost IRQ.
- */
-static void ich_clear_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u8 dma_stat;
-
- /*
- * ide_dma_end() needs BMDMA status for error checking.
- * So, skip clearing BMDMA status here and leave it
- * to ide_dma_end() if this is DMA interrupt.
- */
- if (drive->waiting_for_dma || hwif->dma_base == 0)
- return;
-
- /* clear the INTR & ERROR bits */
- dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
- /* Should we force the bit as well ? */
- outb(dma_stat, hwif->dma_base + ATA_DMA_STATUS);
-}
-
-struct ich_laptop {
- u16 device;
- u16 subvendor;
- u16 subdevice;
-};
-
-/*
- * List of laptops that use short cables rather than 80 wire
- */
-
-static const struct ich_laptop ich_laptop[] = {
- /* devid, subvendor, subdev */
- { 0x27DF, 0x1025, 0x0102 }, /* ICH7 on Acer 5602aWLMi */
- { 0x27DF, 0x0005, 0x0280 }, /* ICH7 on Acer 5602WLMi */
- { 0x27DF, 0x1025, 0x0110 }, /* ICH7 on Acer 3682WLMi */
- { 0x27DF, 0x1043, 0x1267 }, /* ICH7 on Asus W5F */
- { 0x27DF, 0x103C, 0x30A1 }, /* ICH7 on HP Compaq nc2400 */
- { 0x27DF, 0x1071, 0xD221 }, /* ICH7 on Hercules EC-900 */
- { 0x24CA, 0x1025, 0x0061 }, /* ICH4 on Acer Aspire 2023WLMi */
- { 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
- /* end marker */
- { 0, }
-};
-
-static u8 piix_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- const struct ich_laptop *lap = &ich_laptop[0];
- u8 reg54h = 0, mask = hwif->channel ? 0xc0 : 0x30;
-
- /* check for specials */
- while (lap->device) {
- if (lap->device == pdev->device &&
- lap->subvendor == pdev->subsystem_vendor &&
- lap->subdevice == pdev->subsystem_device) {
- return ATA_CBL_PATA40_SHORT;
- }
- lap++;
- }
-
- pci_read_config_byte(pdev, 0x54, &reg54h);
-
- return (reg54h & mask) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-/**
- * init_hwif_piix - fill in the hwif for the PIIX
- * @hwif: IDE interface
- *
- * Set up the ide_hwif_t for the PIIX interface according to the
- * capabilities of the hardware.
- */
-
-static void __devinit init_hwif_piix(ide_hwif_t *hwif)
-{
- if (!hwif->dma_base)
- return;
-
- if (no_piix_dma)
- hwif->ultra_mask = hwif->mwdma_mask = hwif->swdma_mask = 0;
-}
-
-static const struct ide_port_ops piix_port_ops = {
- .set_pio_mode = piix_set_pio_mode,
- .set_dma_mode = piix_set_dma_mode,
- .cable_detect = piix_cable_detect,
-};
-
-static const struct ide_port_ops ich_port_ops = {
- .set_pio_mode = piix_set_pio_mode,
- .set_dma_mode = piix_set_dma_mode,
- .clear_irq = ich_clear_irq,
- .cable_detect = piix_cable_detect,
-};
-
-#ifndef CONFIG_IA64
- #define IDE_HFLAGS_PIIX IDE_HFLAG_LEGACY_IRQS
-#else
- #define IDE_HFLAGS_PIIX 0
-#endif
-
-#define DECLARE_PIIX_DEV(udma) \
- { \
- .name = DRV_NAME, \
- .init_hwif = init_hwif_piix, \
- .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .port_ops = &piix_port_ops, \
- .host_flags = IDE_HFLAGS_PIIX, \
- .pio_mask = ATA_PIO4, \
- .swdma_mask = ATA_SWDMA2_ONLY, \
- .mwdma_mask = ATA_MWDMA12_ONLY, \
- .udma_mask = udma, \
- }
-
-#define DECLARE_ICH_DEV(udma) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_ich, \
- .init_hwif = init_hwif_piix, \
- .enablebits = {{0x41,0x80,0x80}, {0x43,0x80,0x80}}, \
- .port_ops = &ich_port_ops, \
- .host_flags = IDE_HFLAGS_PIIX, \
- .pio_mask = ATA_PIO4, \
- .swdma_mask = ATA_SWDMA2_ONLY, \
- .mwdma_mask = ATA_MWDMA12_ONLY, \
- .udma_mask = udma, \
- }
-
-static const struct ide_port_info piix_pci_info[] __devinitdata = {
- /* 0: MPIIX */
- { /*
- * MPIIX actually has only a single IDE channel mapped to
- * the primary or secondary ports depending on the value
- * of the bit 14 of the IDETIM register at offset 0x6c
- */
- .name = DRV_NAME,
- .enablebits = {{0x6d,0xc0,0x80}, {0x6d,0xc0,0xc0}},
- .host_flags = IDE_HFLAG_ISA_PORTS | IDE_HFLAG_NO_DMA |
- IDE_HFLAGS_PIIX,
- .pio_mask = ATA_PIO4,
- /* This is a painful system best to let it self tune for now */
- },
- /* 1: PIIXa/PIIXb/PIIX3 */
- DECLARE_PIIX_DEV(0x00), /* no udma */
- /* 2: PIIX4 */
- DECLARE_PIIX_DEV(ATA_UDMA2),
- /* 3: ICH0 */
- DECLARE_ICH_DEV(ATA_UDMA2),
- /* 4: ICH */
- DECLARE_ICH_DEV(ATA_UDMA4),
- /* 5: PIIX4 */
- DECLARE_PIIX_DEV(ATA_UDMA4),
- /* 6: ICH[2-7]/ICH[2-3]M/C-ICH/ICH5-SATA/ESB2/ICH8M */
- DECLARE_ICH_DEV(ATA_UDMA5),
-};
-
-/**
- * piix_init_one - called when a PIIX is found
- * @dev: the piix device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int __devinit piix_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &piix_pci_info[id->driver_data], NULL);
-}
-
-/**
- * piix_check_450nx - Check for problem 450NX setup
- *
- * Check for the present of 450NX errata #19 and errata #25. If
- * they are found, disable use of DMA IDE
- */
-
-static void __devinit piix_check_450nx(void)
-{
- struct pci_dev *pdev = NULL;
- u16 cfg;
- while((pdev=pci_get_device(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82454NX, pdev))!=NULL)
- {
- /* Look for 450NX PXB. Check for problem configurations
- A PCI quirk checks bit 6 already */
- pci_read_config_word(pdev, 0x41, &cfg);
- /* Only on the original revision: IDE DMA can hang */
- if (pdev->revision == 0x00)
- no_piix_dma = 1;
- /* On all revisions below 5 PXB bus lock must be disabled for IDE */
- else if (cfg & (1<<14) && pdev->revision < 5)
- no_piix_dma = 2;
- }
- if(no_piix_dma)
- printk(KERN_WARNING DRV_NAME ": 450NX errata present, disabling IDE DMA.\n");
- if(no_piix_dma == 2)
- printk(KERN_WARNING DRV_NAME ": A BIOS update may resolve this.\n");
-}
-
-static const struct pci_device_id piix_pci_tbl[] = {
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_0), 1 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371FB_1), 1 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371MX), 0 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371SB_1), 1 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82371AB), 2 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AB_1), 3 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82443MX_1), 2 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801AA_1), 4 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82372FB_1), 5 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82451NX), 2 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_9), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801BA_8), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_10), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801CA_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801E_11), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_10), 6 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801EB_1), 6 },
-#endif
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB_2), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH6_19), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH7_21), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_82801DB_1), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ESB2_18), 6 },
- { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_INTEL_ICH8_6), 6 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, piix_pci_tbl);
-
-static struct pci_driver piix_pci_driver = {
- .name = "PIIX_IDE",
- .id_table = piix_pci_tbl,
- .probe = piix_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init piix_ide_init(void)
-{
- piix_check_450nx();
- return ide_pci_register_driver(&piix_pci_driver);
-}
-
-static void __exit piix_ide_exit(void)
-{
- pci_unregister_driver(&piix_pci_driver);
-}
-
-module_init(piix_ide_init);
-module_exit(piix_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Andrzej Krzysztofowicz");
-MODULE_DESCRIPTION("PCI driver module for Intel PIIX IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/rz1000.c b/drivers/ide/pci/rz1000.c
deleted file mode 100644
index 7daf0135cbac..000000000000
--- a/drivers/ide/pci/rz1000.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Copyright (C) 1995-1998 Linus Torvalds & author (see below)
- */
-
-/*
- * Principal Author: mlord@pobox.com (Mark Lord)
- *
- * See linux/MAINTAINERS for address of current maintainer.
- *
- * This file provides support for disabling the buggy read-ahead
- * mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
- *
- * Dunno if this fixes both ports, or only the primary port (?).
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "rz1000"
-
-static void __devinit init_hwif_rz1000 (ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u16 reg;
-
- if (!pci_read_config_word (dev, 0x40, &reg) &&
- !pci_write_config_word(dev, 0x40, reg & 0xdfff)) {
- printk(KERN_INFO "%s: disabled chipset read-ahead "
- "(buggy RZ1000/RZ1001)\n", hwif->name);
- } else {
- if (hwif->mate)
- hwif->mate->serialized = hwif->serialized = 1;
- hwif->host_flags |= IDE_HFLAG_NO_UNMASK_IRQS;
- printk(KERN_INFO "%s: serialized, disabled unmasking "
- "(buggy RZ1000/RZ1001)\n", hwif->name);
- }
-}
-
-static const struct ide_port_info rz1000_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_rz1000,
- .chipset = ide_rz1000,
- .host_flags = IDE_HFLAG_NO_DMA,
-};
-
-static int __devinit rz1000_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &rz1000_chipset, NULL);
-}
-
-static const struct pci_device_id rz1000_pci_tbl[] = {
- { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), 0 },
- { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, rz1000_pci_tbl);
-
-static struct pci_driver rz1000_pci_driver = {
- .name = "RZ1000_IDE",
- .id_table = rz1000_pci_tbl,
- .probe = rz1000_init_one,
- .remove = ide_pci_remove,
-};
-
-static int __init rz1000_ide_init(void)
-{
- return ide_pci_register_driver(&rz1000_pci_driver);
-}
-
-static void __exit rz1000_ide_exit(void)
-{
- pci_unregister_driver(&rz1000_pci_driver);
-}
-
-module_init(rz1000_ide_init);
-module_exit(rz1000_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for RZ1000 IDE");
-MODULE_LICENSE("GPL");
-
diff --git a/drivers/ide/pci/sc1200.c b/drivers/ide/pci/sc1200.c
deleted file mode 100644
index f1a8758e3a99..000000000000
--- a/drivers/ide/pci/sc1200.c
+++ /dev/null
@@ -1,357 +0,0 @@
-/*
- * Copyright (C) 2000-2002 Mark Lord <mlord@pobox.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Development of this chipset driver was funded
- * by the nice folks at National Semiconductor.
- *
- * Documentation:
- * Available from National Semiconductor
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/pm.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "sc1200"
-
-#define SC1200_REV_A 0x00
-#define SC1200_REV_B1 0x01
-#define SC1200_REV_B3 0x02
-#define SC1200_REV_C1 0x03
-#define SC1200_REV_D1 0x04
-
-#define PCI_CLK_33 0x00
-#define PCI_CLK_48 0x01
-#define PCI_CLK_66 0x02
-#define PCI_CLK_33A 0x03
-
-static unsigned short sc1200_get_pci_clock (void)
-{
- unsigned char chip_id, silicon_revision;
- unsigned int pci_clock;
- /*
- * Check the silicon revision, as not all versions of the chip
- * have the register with the fast PCI bus timings.
- */
- chip_id = inb (0x903c);
- silicon_revision = inb (0x903d);
-
- // Read the fast pci clock frequency
- if (chip_id == 0x04 && silicon_revision < SC1200_REV_B1) {
- pci_clock = PCI_CLK_33;
- } else {
- // check clock generator configuration (cfcc)
- // the clock is in bits 8 and 9 of this word
-
- pci_clock = inw (0x901e);
- pci_clock >>= 8;
- pci_clock &= 0x03;
- if (pci_clock == PCI_CLK_33A)
- pci_clock = PCI_CLK_33;
- }
- return pci_clock;
-}
-
-/*
- * Here are the standard PIO mode 0-4 timings for each "format".
- * Format-0 uses fast data reg timings, with slower command reg timings.
- * Format-1 uses fast timings for all registers, but won't work with all drives.
- */
-static const unsigned int sc1200_pio_timings[4][5] =
- {{0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010}, // format0 33Mhz
- {0xd1329172, 0x71212171, 0x30200080, 0x20102010, 0x00100010}, // format1, 33Mhz
- {0xfaa3f4f3, 0xc23232b2, 0x513101c1, 0x31213121, 0x10211021}, // format1, 48Mhz
- {0xfff4fff4, 0xf35353d3, 0x814102f1, 0x42314231, 0x11311131}}; // format1, 66Mhz
-
-/*
- * After chip reset, the PIO timings are set to 0x00009172, which is not valid.
- */
-//#define SC1200_BAD_PIO(timings) (((timings)&~0x80000000)==0x00009172)
-
-static void sc1200_tunepio(ide_drive_t *drive, u8 pio)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- unsigned int basereg = hwif->channel ? 0x50 : 0x40, format = 0;
-
- pci_read_config_dword(pdev, basereg + 4, &format);
- format = (format >> 31) & 1;
- if (format)
- format += sc1200_get_pci_clock();
- pci_write_config_dword(pdev, basereg + ((drive->dn & 1) << 3),
- sc1200_pio_timings[format][pio]);
-}
-
-/*
- * The SC1200 specifies that two drives sharing a cable cannot mix
- * UDMA/MDMA. It has to be one or the other, for the pair, though
- * different timings can still be chosen for each drive. We could
- * set the appropriate timing bits on the fly, but that might be
- * a bit confusing. So, for now we statically handle this requirement
- * by looking at our mate drive to see what it is capable of, before
- * choosing a mode for our own drive.
- */
-static u8 sc1200_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *mate = ide_get_pair_dev(drive);
- u16 *mateid = mate->id;
- u8 mask = hwif->ultra_mask;
-
- if (mate == NULL)
- goto out;
-
- if (ata_id_has_dma(mateid) && __ide_dma_bad_drive(mate) == 0) {
- if ((mateid[ATA_ID_FIELD_VALID] & 4) &&
- (mateid[ATA_ID_UDMA_MODES] & 7))
- goto out;
- if ((mateid[ATA_ID_FIELD_VALID] & 2) &&
- (mateid[ATA_ID_MWDMA_MODES] & 7))
- mask = 0;
- }
-out:
- return mask;
-}
-
-static void sc1200_set_dma_mode(ide_drive_t *drive, const u8 mode)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int reg, timings;
- unsigned short pci_clock;
- unsigned int basereg = hwif->channel ? 0x50 : 0x40;
-
- static const u32 udma_timing[3][3] = {
- { 0x00921250, 0x00911140, 0x00911030 },
- { 0x00932470, 0x00922260, 0x00922140 },
- { 0x009436a1, 0x00933481, 0x00923261 },
- };
-
- static const u32 mwdma_timing[3][3] = {
- { 0x00077771, 0x00012121, 0x00002020 },
- { 0x000bbbb2, 0x00024241, 0x00013131 },
- { 0x000ffff3, 0x00035352, 0x00015151 },
- };
-
- pci_clock = sc1200_get_pci_clock();
-
- /*
- * Note that each DMA mode has several timings associated with it.
- * The correct timing depends on the fast PCI clock freq.
- */
-
- if (mode >= XFER_UDMA_0)
- timings = udma_timing[pci_clock][mode - XFER_UDMA_0];
- else
- timings = mwdma_timing[pci_clock][mode - XFER_MW_DMA_0];
-
- if ((drive->dn & 1) == 0) {
- pci_read_config_dword(dev, basereg + 4, &reg);
- timings |= reg & 0x80000000; /* preserve PIO format bit */
- pci_write_config_dword(dev, basereg + 4, timings);
- } else
- pci_write_config_dword(dev, basereg + 12, timings);
-}
-
-/* Replacement for the standard ide_dma_end action in
- * dma_proc.
- *
- * returns 1 on error, 0 otherwise
- */
-static int sc1200_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long dma_base = hwif->dma_base;
- byte dma_stat;
-
- dma_stat = inb(dma_base+2); /* get DMA status */
-
- if (!(dma_stat & 4))
- printk(" ide_dma_end dma_stat=%0x err=%x newerr=%x\n",
- dma_stat, ((dma_stat&7)!=4), ((dma_stat&2)==2));
-
- outb(dma_stat|0x1b, dma_base+2); /* clear the INTR & ERROR bits */
- outb(inb(dma_base)&~1, dma_base); /* !! DO THIS HERE !! stop DMA */
-
- drive->waiting_for_dma = 0;
- ide_destroy_dmatable(drive); /* purge DMA mappings */
-
- return (dma_stat & 7) != 4; /* verify good DMA status */
-}
-
-/*
- * sc1200_set_pio_mode() handles setting of PIO modes
- * for both the chipset and drive.
- *
- * All existing BIOSs for this chipset guarantee that all drives
- * will have valid default PIO timings set up before we get here.
- */
-
-static void sc1200_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- int mode = -1;
-
- /*
- * bad abuse of ->set_pio_mode interface
- */
- switch (pio) {
- case 200: mode = XFER_UDMA_0; break;
- case 201: mode = XFER_UDMA_1; break;
- case 202: mode = XFER_UDMA_2; break;
- case 100: mode = XFER_MW_DMA_0; break;
- case 101: mode = XFER_MW_DMA_1; break;
- case 102: mode = XFER_MW_DMA_2; break;
- }
- if (mode != -1) {
- printk("SC1200: %s: changing (U)DMA mode\n", drive->name);
- ide_dma_off_quietly(drive);
- if (ide_set_dma_mode(drive, mode) == 0 &&
- (drive->dev_flags & IDE_DFLAG_USING_DMA))
- hwif->dma_ops->dma_host_set(drive, 1);
- return;
- }
-
- sc1200_tunepio(drive, pio);
-}
-
-#ifdef CONFIG_PM
-struct sc1200_saved_state {
- u32 regs[8];
-};
-
-static int sc1200_suspend (struct pci_dev *dev, pm_message_t state)
-{
- printk("SC1200: suspend(%u)\n", state.event);
-
- /*
- * we only save state when going from full power to less
- */
- if (state.event == PM_EVENT_ON) {
- struct ide_host *host = pci_get_drvdata(dev);
- struct sc1200_saved_state *ss = host->host_priv;
- unsigned int r;
-
- /*
- * save timing registers
- * (this may be unnecessary if BIOS also does it)
- */
- for (r = 0; r < 8; r++)
- pci_read_config_dword(dev, 0x40 + r * 4, &ss->regs[r]);
- }
-
- pci_disable_device(dev);
- pci_set_power_state(dev, pci_choose_state(dev, state));
- return 0;
-}
-
-static int sc1200_resume (struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct sc1200_saved_state *ss = host->host_priv;
- unsigned int r;
- int i;
-
- i = pci_enable_device(dev);
- if (i)
- return i;
-
- /*
- * restore timing registers
- * (this may be unnecessary if BIOS also does it)
- */
- for (r = 0; r < 8; r++)
- pci_write_config_dword(dev, 0x40 + r * 4, ss->regs[r]);
-
- return 0;
-}
-#endif
-
-static const struct ide_port_ops sc1200_port_ops = {
- .set_pio_mode = sc1200_set_pio_mode,
- .set_dma_mode = sc1200_set_dma_mode,
- .udma_filter = sc1200_udma_filter,
-};
-
-static const struct ide_dma_ops sc1200_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = sc1200_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info sc1200_chipset __devinitdata = {
- .name = DRV_NAME,
- .port_ops = &sc1200_port_ops,
- .dma_ops = &sc1200_dma_ops,
- .host_flags = IDE_HFLAG_SERIALIZE |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_ABUSE_DMA_MODES,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA2,
-};
-
-static int __devinit sc1200_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct sc1200_saved_state *ss = NULL;
- int rc;
-
-#ifdef CONFIG_PM
- ss = kmalloc(sizeof(*ss), GFP_KERNEL);
- if (ss == NULL)
- return -ENOMEM;
-#endif
- rc = ide_pci_init_one(dev, &sc1200_chipset, ss);
- if (rc)
- kfree(ss);
-
- return rc;
-}
-
-static const struct pci_device_id sc1200_pci_tbl[] = {
- { PCI_VDEVICE(NS, PCI_DEVICE_ID_NS_SCx200_IDE), 0},
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, sc1200_pci_tbl);
-
-static struct pci_driver sc1200_pci_driver = {
- .name = "SC1200_IDE",
- .id_table = sc1200_pci_tbl,
- .probe = sc1200_init_one,
- .remove = ide_pci_remove,
-#ifdef CONFIG_PM
- .suspend = sc1200_suspend,
- .resume = sc1200_resume,
-#endif
-};
-
-static int __init sc1200_ide_init(void)
-{
- return ide_pci_register_driver(&sc1200_pci_driver);
-}
-
-static void __exit sc1200_ide_exit(void)
-{
- pci_unregister_driver(&sc1200_pci_driver);
-}
-
-module_init(sc1200_ide_init);
-module_exit(sc1200_ide_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for NS SC1200 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/scc_pata.c b/drivers/ide/pci/scc_pata.c
deleted file mode 100644
index 49f163aa51e3..000000000000
--- a/drivers/ide/pci/scc_pata.c
+++ /dev/null
@@ -1,966 +0,0 @@
-/*
- * Support for IDE interfaces on Celleb platform
- *
- * (C) Copyright 2006 TOSHIBA CORPORATION
- *
- * This code is based on drivers/ide/pci/siimage.c:
- * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4
-
-#define SCC_PATA_NAME "scc IDE"
-
-#define TDVHSEL_MASTER 0x00000001
-#define TDVHSEL_SLAVE 0x00000004
-
-#define MODE_JCUSFEN 0x00000080
-
-#define CCKCTRL_ATARESET 0x00040000
-#define CCKCTRL_BUFCNT 0x00020000
-#define CCKCTRL_CRST 0x00010000
-#define CCKCTRL_OCLKEN 0x00000100
-#define CCKCTRL_ATACLKOEN 0x00000002
-#define CCKCTRL_LCLKEN 0x00000001
-
-#define QCHCD_IOS_SS 0x00000001
-
-#define QCHSD_STPDIAG 0x00020000
-
-#define INTMASK_MSK 0xD1000012
-#define INTSTS_SERROR 0x80000000
-#define INTSTS_PRERR 0x40000000
-#define INTSTS_RERR 0x10000000
-#define INTSTS_ICERR 0x01000000
-#define INTSTS_BMSINT 0x00000010
-#define INTSTS_BMHE 0x00000008
-#define INTSTS_IOIRQS 0x00000004
-#define INTSTS_INTRQ 0x00000002
-#define INTSTS_ACTEINT 0x00000001
-
-#define ECMODE_VALUE 0x01
-
-static struct scc_ports {
- unsigned long ctl, dma;
- struct ide_host *host; /* for removing port from system */
-} scc_ports[MAX_HWIFS];
-
-/* PIO transfer mode table */
-/* JCHST */
-static unsigned long JCHSTtbl[2][7] = {
- {0x0E, 0x05, 0x02, 0x03, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x07, 0x04, 0x04, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHHT */
-static unsigned long JCHHTtbl[2][7] = {
- {0x0E, 0x02, 0x02, 0x02, 0x02, 0x00, 0x00}, /* 100MHz */
- {0x13, 0x03, 0x03, 0x03, 0x03, 0x00, 0x00} /* 133MHz */
-};
-
-/* JCHCT */
-static unsigned long JCHCTtbl[2][7] = {
- {0x1D, 0x1D, 0x1C, 0x0B, 0x06, 0x00, 0x00}, /* 100MHz */
- {0x27, 0x26, 0x26, 0x0E, 0x09, 0x00, 0x00} /* 133MHz */
-};
-
-
-/* DMA transfer mode table */
-/* JCHDCTM/JCHDCTS */
-static unsigned long JCHDCTxtbl[2][7] = {
- {0x0A, 0x06, 0x04, 0x03, 0x01, 0x00, 0x00}, /* 100MHz */
- {0x0E, 0x09, 0x06, 0x04, 0x02, 0x01, 0x00} /* 133MHz */
-};
-
-/* JCSTWTM/JCSTWTS */
-static unsigned long JCSTWTxtbl[2][7] = {
- {0x06, 0x04, 0x03, 0x02, 0x02, 0x02, 0x00}, /* 100MHz */
- {0x09, 0x06, 0x04, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCTSS */
-static unsigned long JCTSStbl[2][7] = {
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x00}, /* 100MHz */
- {0x05, 0x05, 0x05, 0x05, 0x05, 0x05, 0x05} /* 133MHz */
-};
-
-/* JCENVT */
-static unsigned long JCENVTtbl[2][7] = {
- {0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x02, 0x02, 0x02, 0x02, 0x02, 0x02, 0x02} /* 133MHz */
-};
-
-/* JCACTSELS/JCACTSELM */
-static unsigned long JCACTSELtbl[2][7] = {
- {0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x00}, /* 100MHz */
- {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01} /* 133MHz */
-};
-
-
-static u8 scc_ide_inb(unsigned long port)
-{
- u32 data = in_be32((void*)port);
- return (u8)data;
-}
-
-static void scc_exec_command(ide_hwif_t *hwif, u8 cmd)
-{
- out_be32((void *)hwif->io_ports.command_addr, cmd);
- eieio();
- in_be32((void *)(hwif->dma_base + 0x01c));
- eieio();
-}
-
-static u8 scc_read_status(ide_hwif_t *hwif)
-{
- return (u8)in_be32((void *)hwif->io_ports.status_addr);
-}
-
-static u8 scc_read_altstatus(ide_hwif_t *hwif)
-{
- return (u8)in_be32((void *)hwif->io_ports.ctl_addr);
-}
-
-static u8 scc_read_sff_dma_status(ide_hwif_t *hwif)
-{
- return (u8)in_be32((void *)(hwif->dma_base + 4));
-}
-
-static void scc_set_irq(ide_hwif_t *hwif, int on)
-{
- u8 ctl = ATA_DEVCTL_OBS;
-
- if (on == 4) { /* hack for SRST */
- ctl |= 4;
- on &= ~4;
- }
-
- ctl |= on ? 0 : 2;
-
- out_be32((void *)hwif->io_ports.ctl_addr, ctl);
- eieio();
- in_be32((void *)(hwif->dma_base + 0x01c));
- eieio();
-}
-
-static void scc_ide_insw(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- }
-}
-
-static void scc_ide_insl(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- *ptr++ = le16_to_cpu(in_be32((void*)port));
- }
-}
-
-static void scc_ide_outb(u8 addr, unsigned long port)
-{
- out_be32((void*)port, addr);
-}
-
-static void
-scc_ide_outsw(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- out_be32((void*)port, cpu_to_le16(*ptr++));
- }
-}
-
-static void
-scc_ide_outsl(unsigned long port, void *addr, u32 count)
-{
- u16 *ptr = (u16 *)addr;
- while (count--) {
- out_be32((void*)port, cpu_to_le16(*ptr++));
- out_be32((void*)port, cpu_to_le16(*ptr++));
- }
-}
-
-/**
- * scc_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Load the timing settings for this device mode into the
- * controller.
- */
-
-static void scc_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct scc_ports *ports = ide_get_hwifdata(hwif);
- unsigned long ctl_base = ports->ctl;
- unsigned long cckctrl_port = ctl_base + 0xff0;
- unsigned long piosht_port = ctl_base + 0x000;
- unsigned long pioct_port = ctl_base + 0x004;
- unsigned long reg;
- int offset;
-
- reg = in_be32((void __iomem *)cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN) {
- offset = 1; /* 133MHz */
- } else {
- offset = 0; /* 100MHz */
- }
- reg = JCHSTtbl[offset][pio] << 16 | JCHHTtbl[offset][pio];
- out_be32((void __iomem *)piosht_port, reg);
- reg = JCHCTtbl[offset][pio];
- out_be32((void __iomem *)pioct_port, reg);
-}
-
-/**
- * scc_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Load the timing settings for this device mode into the
- * controller.
- */
-
-static void scc_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct scc_ports *ports = ide_get_hwifdata(hwif);
- unsigned long ctl_base = ports->ctl;
- unsigned long cckctrl_port = ctl_base + 0xff0;
- unsigned long mdmact_port = ctl_base + 0x008;
- unsigned long mcrcst_port = ctl_base + 0x00c;
- unsigned long sdmact_port = ctl_base + 0x010;
- unsigned long scrcst_port = ctl_base + 0x014;
- unsigned long udenvt_port = ctl_base + 0x018;
- unsigned long tdvhsel_port = ctl_base + 0x020;
- int is_slave = (&hwif->drives[1] == drive);
- int offset, idx;
- unsigned long reg;
- unsigned long jcactsel;
-
- reg = in_be32((void __iomem *)cckctrl_port);
- if (reg & CCKCTRL_ATACLKOEN) {
- offset = 1; /* 133MHz */
- } else {
- offset = 0; /* 100MHz */
- }
-
- idx = speed - XFER_UDMA_0;
-
- jcactsel = JCACTSELtbl[offset][idx];
- if (is_slave) {
- out_be32((void __iomem *)sdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32((void __iomem *)scrcst_port, JCSTWTxtbl[offset][idx]);
- jcactsel = jcactsel << 2;
- out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_SLAVE) | jcactsel);
- } else {
- out_be32((void __iomem *)mdmact_port, JCHDCTxtbl[offset][idx]);
- out_be32((void __iomem *)mcrcst_port, JCSTWTxtbl[offset][idx]);
- out_be32((void __iomem *)tdvhsel_port, (in_be32((void __iomem *)tdvhsel_port) & ~TDVHSEL_MASTER) | jcactsel);
- }
- reg = JCTSStbl[offset][idx] << 16 | JCENVTtbl[offset][idx];
- out_be32((void __iomem *)udenvt_port, reg);
-}
-
-static void scc_dma_host_set(ide_drive_t *drive, int on)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 unit = drive->dn & 1;
- u8 dma_stat = scc_ide_inb(hwif->dma_base + 4);
-
- if (on)
- dma_stat |= (1 << (5 + unit));
- else
- dma_stat &= ~(1 << (5 + unit));
-
- scc_ide_outb(dma_stat, hwif->dma_base + 4);
-}
-
-/**
- * scc_ide_dma_setup - begin a DMA phase
- * @drive: target device
- *
- * Build an IDE DMA PRD (IDE speak for scatter gather table)
- * and then set up the DMA transfer registers.
- *
- * Returns 0 on success. If a PIO fallback is required then 1
- * is returned.
- */
-
-static int scc_dma_setup(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = HWGROUP(drive)->rq;
- unsigned int reading;
- u8 dma_stat;
-
- if (rq_data_dir(rq))
- reading = 0;
- else
- reading = 1 << 3;
-
- /* fall back to pio! */
- if (!ide_build_dmatable(drive, rq)) {
- ide_map_sg(drive, rq);
- return 1;
- }
-
- /* PRD table */
- out_be32((void __iomem *)(hwif->dma_base + 8), hwif->dmatable_dma);
-
- /* specify r/w */
- out_be32((void __iomem *)hwif->dma_base, reading);
-
- /* read DMA status for INTR & ERROR flags */
- dma_stat = in_be32((void __iomem *)(hwif->dma_base + 4));
-
- /* clear INTR & ERROR flags */
- out_be32((void __iomem *)(hwif->dma_base + 4), dma_stat | 6);
- drive->waiting_for_dma = 1;
- return 0;
-}
-
-static void scc_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_cmd = scc_ide_inb(hwif->dma_base);
-
- /* start DMA */
- scc_ide_outb(dma_cmd | 1, hwif->dma_base);
- wmb();
-}
-
-static int __scc_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 dma_stat, dma_cmd;
-
- drive->waiting_for_dma = 0;
- /* get DMA command mode */
- dma_cmd = scc_ide_inb(hwif->dma_base);
- /* stop DMA */
- scc_ide_outb(dma_cmd & ~1, hwif->dma_base);
- /* get DMA status */
- dma_stat = scc_ide_inb(hwif->dma_base + 4);
- /* clear the INTR & ERROR bits */
- scc_ide_outb(dma_stat | 6, hwif->dma_base + 4);
- /* purge DMA mappings */
- ide_destroy_dmatable(drive);
- /* verify good DMA status */
- wmb();
- return (dma_stat & 7) != 4 ? (0x10 | dma_stat) : 0;
-}
-
-/**
- * scc_dma_end - Stop DMA
- * @drive: IDE drive
- *
- * Check and clear INT Status register.
- * Then call __scc_dma_end().
- */
-
-static int scc_dma_end(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- void __iomem *dma_base = (void __iomem *)hwif->dma_base;
- unsigned long intsts_port = hwif->dma_base + 0x014;
- u32 reg;
- int dma_stat, data_loss = 0;
- static int retry = 0;
-
- /* errata A308 workaround: Step5 (check data loss) */
- /* We don't check non ide_disk because it is limited to UDMA4 */
- if (!(in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ATA_ERR) &&
- drive->media == ide_disk && drive->current_speed > XFER_UDMA_4) {
- reg = in_be32((void __iomem *)intsts_port);
- if (!(reg & INTSTS_ACTEINT)) {
- printk(KERN_WARNING "%s: operation failed (transfer data loss)\n",
- drive->name);
- data_loss = 1;
- if (retry++) {
- struct request *rq = HWGROUP(drive)->rq;
- int unit;
- /* ERROR_RESET and drive->crc_count are needed
- * to reduce DMA transfer mode in retry process.
- */
- if (rq)
- rq->errors |= ERROR_RESET;
- for (unit = 0; unit < MAX_DRIVES; unit++) {
- ide_drive_t *drive = &hwif->drives[unit];
- drive->crc_count++;
- }
- }
- }
- }
-
- while (1) {
- reg = in_be32((void __iomem *)intsts_port);
-
- if (reg & INTSTS_SERROR) {
- printk(KERN_WARNING "%s: SERROR\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_SERROR|INTSTS_BMSINT);
-
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_PRERR) {
- u32 maea0, maec0;
- unsigned long ctl_base = hwif->config_data;
-
- maea0 = in_be32((void __iomem *)(ctl_base + 0xF50));
- maec0 = in_be32((void __iomem *)(ctl_base + 0xF54));
-
- printk(KERN_WARNING "%s: PRERR [addr:%x cmd:%x]\n", SCC_PATA_NAME, maea0, maec0);
-
- out_be32((void __iomem *)intsts_port, INTSTS_PRERR|INTSTS_BMSINT);
-
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_RERR) {
- printk(KERN_WARNING "%s: Response Error\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_RERR|INTSTS_BMSINT);
-
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
- continue;
- }
-
- if (reg & INTSTS_ICERR) {
- out_be32(dma_base, in_be32(dma_base) & ~QCHCD_IOS_SS);
-
- printk(KERN_WARNING "%s: Illegal Configuration\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_ICERR|INTSTS_BMSINT);
- continue;
- }
-
- if (reg & INTSTS_BMSINT) {
- printk(KERN_WARNING "%s: Internal Bus Error\n", SCC_PATA_NAME);
- out_be32((void __iomem *)intsts_port, INTSTS_BMSINT);
-
- ide_do_reset(drive);
- continue;
- }
-
- if (reg & INTSTS_BMHE) {
- out_be32((void __iomem *)intsts_port, INTSTS_BMHE);
- continue;
- }
-
- if (reg & INTSTS_ACTEINT) {
- out_be32((void __iomem *)intsts_port, INTSTS_ACTEINT);
- continue;
- }
-
- if (reg & INTSTS_IOIRQS) {
- out_be32((void __iomem *)intsts_port, INTSTS_IOIRQS);
- continue;
- }
- break;
- }
-
- dma_stat = __scc_dma_end(drive);
- if (data_loss)
- dma_stat |= 2; /* emulate DMA error (to retry command) */
- return dma_stat;
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int scc_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u32 int_stat = in_be32((void __iomem *)hwif->dma_base + 0x014);
-
- /* SCC errata A252,A308 workaround: Step4 */
- if ((in_be32((void __iomem *)hwif->io_ports.ctl_addr)
- & ATA_ERR) &&
- (int_stat & INTSTS_INTRQ))
- return 1;
-
- /* SCC errata A308 workaround: Step5 (polling IOIRQS) */
- if (int_stat & INTSTS_IOIRQS)
- return 1;
-
- return 0;
-}
-
-static u8 scc_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- u8 mask = hwif->ultra_mask;
-
- /* errata A308 workaround: limit non ide_disk drive to UDMA4 */
- if ((drive->media != ide_disk) && (mask & 0xE0)) {
- printk(KERN_INFO "%s: limit %s to UDMA4\n",
- SCC_PATA_NAME, drive->name);
- mask = ATA_UDMA4;
- }
-
- return mask;
-}
-
-/**
- * setup_mmio_scc - map CTRL/BMID region
- * @dev: PCI device we are configuring
- * @name: device name
- *
- */
-
-static int setup_mmio_scc (struct pci_dev *dev, const char *name)
-{
- unsigned long ctl_base = pci_resource_start(dev, 0);
- unsigned long dma_base = pci_resource_start(dev, 1);
- unsigned long ctl_size = pci_resource_len(dev, 0);
- unsigned long dma_size = pci_resource_len(dev, 1);
- void __iomem *ctl_addr;
- void __iomem *dma_addr;
- int i, ret;
-
- for (i = 0; i < MAX_HWIFS; i++) {
- if (scc_ports[i].ctl == 0)
- break;
- }
- if (i >= MAX_HWIFS)
- return -ENOMEM;
-
- ret = pci_request_selected_regions(dev, (1 << 2) - 1, name);
- if (ret < 0) {
- printk(KERN_ERR "%s: can't reserve resources\n", name);
- return ret;
- }
-
- if ((ctl_addr = ioremap(ctl_base, ctl_size)) == NULL)
- goto fail_0;
-
- if ((dma_addr = ioremap(dma_base, dma_size)) == NULL)
- goto fail_1;
-
- pci_set_master(dev);
- scc_ports[i].ctl = (unsigned long)ctl_addr;
- scc_ports[i].dma = (unsigned long)dma_addr;
- pci_set_drvdata(dev, (void *) &scc_ports[i]);
-
- return 1;
-
- fail_1:
- iounmap(ctl_addr);
- fail_0:
- return -ENOMEM;
-}
-
-static int scc_ide_setup_pci_device(struct pci_dev *dev,
- const struct ide_port_info *d)
-{
- struct scc_ports *ports = pci_get_drvdata(dev);
- struct ide_host *host;
- hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
- int i, rc;
-
- memset(&hw, 0, sizeof(hw));
- for (i = 0; i <= 8; i++)
- hw.io_ports_array[i] = ports->dma + 0x20 + i * 4;
- hw.irq = dev->irq;
- hw.dev = &dev->dev;
- hw.chipset = ide_pci;
-
- rc = ide_host_add(d, hws, &host);
- if (rc)
- return rc;
-
- ports->host = host;
-
- return 0;
-}
-
-/**
- * init_setup_scc - set up an SCC PATA Controller
- * @dev: PCI device
- * @d: IDE port info
- *
- * Perform the initial set up for this device.
- */
-
-static int __devinit init_setup_scc(struct pci_dev *dev,
- const struct ide_port_info *d)
-{
- unsigned long ctl_base;
- unsigned long dma_base;
- unsigned long cckctrl_port;
- unsigned long intmask_port;
- unsigned long mode_port;
- unsigned long ecmode_port;
- u32 reg = 0;
- struct scc_ports *ports;
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- goto end;
-
- rc = setup_mmio_scc(dev, d->name);
- if (rc < 0)
- goto end;
-
- ports = pci_get_drvdata(dev);
- ctl_base = ports->ctl;
- dma_base = ports->dma;
- cckctrl_port = ctl_base + 0xff0;
- intmask_port = dma_base + 0x010;
- mode_port = ctl_base + 0x024;
- ecmode_port = ctl_base + 0xf00;
-
- /* controller initialization */
- reg = 0;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_ATACLKOEN;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_LCLKEN | CCKCTRL_OCLKEN;
- out_be32((void*)cckctrl_port, reg);
- reg |= CCKCTRL_CRST;
- out_be32((void*)cckctrl_port, reg);
-
- for (;;) {
- reg = in_be32((void*)cckctrl_port);
- if (reg & CCKCTRL_CRST)
- break;
- udelay(5000);
- }
-
- reg |= CCKCTRL_ATARESET;
- out_be32((void*)cckctrl_port, reg);
-
- out_be32((void*)ecmode_port, ECMODE_VALUE);
- out_be32((void*)mode_port, MODE_JCUSFEN);
- out_be32((void*)intmask_port, INTMASK_MSK);
-
- rc = scc_ide_setup_pci_device(dev, d);
-
- end:
- return rc;
-}
-
-static void scc_tf_load(ide_drive_t *drive, ide_task_t *task)
-{
- struct ide_io_ports *io_ports = &drive->hwif->io_ports;
- struct ide_taskfile *tf = &task->tf;
- u8 HIHI = (task->tf_flags & IDE_TFLAG_LBA48) ? 0xE0 : 0xEF;
-
- if (task->tf_flags & IDE_TFLAG_FLAGGED)
- HIHI = 0xFF;
-
- if (task->tf_flags & IDE_TFLAG_OUT_DATA)
- out_be32((void *)io_ports->data_addr,
- (tf->hob_data << 8) | tf->data);
-
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_FEATURE)
- scc_ide_outb(tf->hob_feature, io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_NSECT)
- scc_ide_outb(tf->hob_nsect, io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAL)
- scc_ide_outb(tf->hob_lbal, io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAM)
- scc_ide_outb(tf->hob_lbam, io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_HOB_LBAH)
- scc_ide_outb(tf->hob_lbah, io_ports->lbah_addr);
-
- if (task->tf_flags & IDE_TFLAG_OUT_FEATURE)
- scc_ide_outb(tf->feature, io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_NSECT)
- scc_ide_outb(tf->nsect, io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_LBAL)
- scc_ide_outb(tf->lbal, io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_LBAM)
- scc_ide_outb(tf->lbam, io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_OUT_LBAH)
- scc_ide_outb(tf->lbah, io_ports->lbah_addr);
-
- if (task->tf_flags & IDE_TFLAG_OUT_DEVICE)
- scc_ide_outb((tf->device & HIHI) | drive->select,
- io_ports->device_addr);
-}
-
-static void scc_tf_read(ide_drive_t *drive, ide_task_t *task)
-{
- struct ide_io_ports *io_ports = &drive->hwif->io_ports;
- struct ide_taskfile *tf = &task->tf;
-
- if (task->tf_flags & IDE_TFLAG_IN_DATA) {
- u16 data = (u16)in_be32((void *)io_ports->data_addr);
-
- tf->data = data & 0xff;
- tf->hob_data = (data >> 8) & 0xff;
- }
-
- /* be sure we're looking at the low order bits */
- scc_ide_outb(ATA_DEVCTL_OBS & ~0x80, io_ports->ctl_addr);
-
- if (task->tf_flags & IDE_TFLAG_IN_FEATURE)
- tf->feature = scc_ide_inb(io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_IN_NSECT)
- tf->nsect = scc_ide_inb(io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAL)
- tf->lbal = scc_ide_inb(io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAM)
- tf->lbam = scc_ide_inb(io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_IN_LBAH)
- tf->lbah = scc_ide_inb(io_ports->lbah_addr);
- if (task->tf_flags & IDE_TFLAG_IN_DEVICE)
- tf->device = scc_ide_inb(io_ports->device_addr);
-
- if (task->tf_flags & IDE_TFLAG_LBA48) {
- scc_ide_outb(ATA_DEVCTL_OBS | 0x80, io_ports->ctl_addr);
-
- if (task->tf_flags & IDE_TFLAG_IN_HOB_FEATURE)
- tf->hob_feature = scc_ide_inb(io_ports->feature_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_NSECT)
- tf->hob_nsect = scc_ide_inb(io_ports->nsect_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAL)
- tf->hob_lbal = scc_ide_inb(io_ports->lbal_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAM)
- tf->hob_lbam = scc_ide_inb(io_ports->lbam_addr);
- if (task->tf_flags & IDE_TFLAG_IN_HOB_LBAH)
- tf->hob_lbah = scc_ide_inb(io_ports->lbah_addr);
- }
-}
-
-static void scc_input_data(ide_drive_t *drive, struct request *rq,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- len++;
-
- if (drive->io_32bit) {
- scc_ide_insl(data_addr, buf, len / 4);
-
- if ((len & 3) >= 2)
- scc_ide_insw(data_addr, (u8 *)buf + (len & ~3), 1);
- } else
- scc_ide_insw(data_addr, buf, len / 2);
-}
-
-static void scc_output_data(ide_drive_t *drive, struct request *rq,
- void *buf, unsigned int len)
-{
- unsigned long data_addr = drive->hwif->io_ports.data_addr;
-
- len++;
-
- if (drive->io_32bit) {
- scc_ide_outsl(data_addr, buf, len / 4);
-
- if ((len & 3) >= 2)
- scc_ide_outsw(data_addr, (u8 *)buf + (len & ~3), 1);
- } else
- scc_ide_outsw(data_addr, buf, len / 2);
-}
-
-/**
- * init_mmio_iops_scc - set up the iops for MMIO
- * @hwif: interface to set up
- *
- */
-
-static void __devinit init_mmio_iops_scc(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct scc_ports *ports = pci_get_drvdata(dev);
- unsigned long dma_base = ports->dma;
-
- ide_set_hwifdata(hwif, ports);
-
- hwif->dma_base = dma_base;
- hwif->config_data = ports->ctl;
-}
-
-/**
- * init_iops_scc - set up iops
- * @hwif: interface to set up
- *
- * Do the basic setup for the SCC hardware interface
- * and then do the MMIO setup.
- */
-
-static void __devinit init_iops_scc(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- hwif->hwif_data = NULL;
- if (pci_get_drvdata(dev) == NULL)
- return;
- init_mmio_iops_scc(hwif);
-}
-
-static int __devinit scc_init_dma(ide_hwif_t *hwif,
- const struct ide_port_info *d)
-{
- return ide_allocate_dma_engine(hwif);
-}
-
-static u8 scc_cable_detect(ide_hwif_t *hwif)
-{
- return ATA_CBL_PATA80;
-}
-
-/**
- * init_hwif_scc - set up hwif
- * @hwif: interface to set up
- *
- * We do the basic set up of the interface structure. The SCC
- * requires several custom handlers so we override the default
- * ide DMA handlers appropriately.
- */
-
-static void __devinit init_hwif_scc(ide_hwif_t *hwif)
-{
- /* PTERADD */
- out_be32((void __iomem *)(hwif->dma_base + 0x018), hwif->dmatable_dma);
-
- if (in_be32((void __iomem *)(hwif->config_data + 0xff0)) & CCKCTRL_ATACLKOEN)
- hwif->ultra_mask = ATA_UDMA6; /* 133MHz */
- else
- hwif->ultra_mask = ATA_UDMA5; /* 100MHz */
-}
-
-static const struct ide_tp_ops scc_tp_ops = {
- .exec_command = scc_exec_command,
- .read_status = scc_read_status,
- .read_altstatus = scc_read_altstatus,
- .read_sff_dma_status = scc_read_sff_dma_status,
-
- .set_irq = scc_set_irq,
-
- .tf_load = scc_tf_load,
- .tf_read = scc_tf_read,
-
- .input_data = scc_input_data,
- .output_data = scc_output_data,
-};
-
-static const struct ide_port_ops scc_port_ops = {
- .set_pio_mode = scc_set_pio_mode,
- .set_dma_mode = scc_set_dma_mode,
- .udma_filter = scc_udma_filter,
- .cable_detect = scc_cable_detect,
-};
-
-static const struct ide_dma_ops scc_dma_ops = {
- .dma_host_set = scc_dma_host_set,
- .dma_setup = scc_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = scc_dma_start,
- .dma_end = scc_dma_end,
- .dma_test_irq = scc_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-#define DECLARE_SCC_DEV(name_str) \
- { \
- .name = name_str, \
- .init_iops = init_iops_scc, \
- .init_dma = scc_init_dma, \
- .init_hwif = init_hwif_scc, \
- .tp_ops = &scc_tp_ops, \
- .port_ops = &scc_port_ops, \
- .dma_ops = &scc_dma_ops, \
- .host_flags = IDE_HFLAG_SINGLE, \
- .pio_mask = ATA_PIO4, \
- }
-
-static const struct ide_port_info scc_chipsets[] __devinitdata = {
- /* 0 */ DECLARE_SCC_DEV("sccIDE"),
-};
-
-/**
- * scc_init_one - pci layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an SCC PATA controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit scc_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return init_setup_scc(dev, &scc_chipsets[id->driver_data]);
-}
-
-/**
- * scc_remove - pci layer remove entry
- * @dev: PCI device
- *
- * Called by the PCI code when it removes an SCC PATA controller.
- */
-
-static void __devexit scc_remove(struct pci_dev *dev)
-{
- struct scc_ports *ports = pci_get_drvdata(dev);
- struct ide_host *host = ports->host;
-
- ide_host_remove(host);
-
- iounmap((void*)ports->dma);
- iounmap((void*)ports->ctl);
- pci_release_selected_regions(dev, (1 << 2) - 1);
- memset(ports, 0, sizeof(*ports));
-}
-
-static const struct pci_device_id scc_pci_tbl[] = {
- { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_SCC_ATA), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, scc_pci_tbl);
-
-static struct pci_driver scc_pci_driver = {
- .name = "SCC IDE",
- .id_table = scc_pci_tbl,
- .probe = scc_init_one,
- .remove = __devexit_p(scc_remove),
-};
-
-static int scc_ide_init(void)
-{
- return ide_pci_register_driver(&scc_pci_driver);
-}
-
-module_init(scc_ide_init);
-/* -- No exit code?
-static void scc_ide_exit(void)
-{
- ide_pci_unregister_driver(&scc_pci_driver);
-}
-module_exit(scc_ide_exit);
- */
-
-
-MODULE_DESCRIPTION("PCI driver module for Toshiba SCC IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/serverworks.c b/drivers/ide/pci/serverworks.c
deleted file mode 100644
index 437bc919dafd..000000000000
--- a/drivers/ide/pci/serverworks.c
+++ /dev/null
@@ -1,470 +0,0 @@
-/*
- * Copyright (C) 1998-2000 Michel Aubry
- * Copyright (C) 1998-2000 Andrzej Krzysztofowicz
- * Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- * Portions copyright (c) 2001 Sun Microsystems
- *
- *
- * RCC/ServerWorks IDE driver for Linux
- *
- * OSB4: `Open South Bridge' IDE Interface (fn 1)
- * supports UDMA mode 2 (33 MB/s)
- *
- * CSB5: `Champion South Bridge' IDE Interface (fn 1)
- * all revisions support UDMA mode 4 (66 MB/s)
- * revision A2.0 and up support UDMA mode 5 (100 MB/s)
- *
- * *** The CSB5 does not provide ANY register ***
- * *** to detect 80-conductor cable presence. ***
- *
- * CSB6: `Champion South Bridge' IDE Interface (optional: third channel)
- *
- * HT1000: AKA BCM5785 - Hypertransport Southbridge for Opteron systems. IDE
- * controller same as the CSB6. Single channel ATA100 only.
- *
- * Documentation:
- * Available under NDA only. Errata info very hard to get.
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "serverworks"
-
-#define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
-#define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */
-
-/* Seagate Barracuda ATA IV Family drives in UDMA mode 5
- * can overrun their FIFOs when used with the CSB5 */
-static const char *svwks_bad_ata100[] = {
- "ST320011A",
- "ST340016A",
- "ST360021A",
- "ST380021A",
- NULL
-};
-
-static struct pci_dev *isa_dev;
-
-static int check_in_drive_lists (ide_drive_t *drive, const char **list)
-{
- char *m = (char *)&drive->id[ATA_ID_PROD];
-
- while (*list)
- if (!strcmp(*list++, m))
- return 1;
- return 0;
-}
-
-static u8 svwks_udma_filter(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 mask = 0;
-
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE)
- return 0x1f;
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- u32 reg = 0;
- if (isa_dev)
- pci_read_config_dword(isa_dev, 0x64, &reg);
-
- /*
- * Don't enable UDMA on disk devices for the moment
- */
- if(drive->media == ide_disk)
- return 0;
- /* Check the OSB4 DMA33 enable bit */
- return ((reg & 0x00004000) == 0x00004000) ? 0x07 : 0;
- } else if (dev->revision < SVWKS_CSB5_REVISION_NEW) {
- return 0x07;
- } else if (dev->revision >= SVWKS_CSB5_REVISION_NEW) {
- u8 btr = 0, mode;
- pci_read_config_byte(dev, 0x5A, &btr);
- mode = btr & 0x3;
-
- /* If someone decides to do UDMA133 on CSB5 the same
- issue will bite so be inclusive */
- if (mode > 2 && check_in_drive_lists(drive, svwks_bad_ata100))
- mode = 2;
-
- switch(mode) {
- case 3: mask = 0x3f; break;
- case 2: mask = 0x1f; break;
- case 1: mask = 0x07; break;
- default: mask = 0x00; break;
- }
- }
- if (((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) &&
- (!(PCI_FUNC(dev->devfn) & 1)))
- mask = 0x1f;
-
- return mask;
-}
-
-static u8 svwks_csb_check (struct pci_dev *dev)
-{
- switch (dev->device) {
- case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE:
- case PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2:
- case PCI_DEVICE_ID_SERVERWORKS_HT1000IDE:
- return 1;
- default:
- break;
- }
- return 0;
-}
-
-static void svwks_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- static const u8 pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
- static const u8 drive_pci[] = { 0x41, 0x40, 0x43, 0x42 };
-
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-
- pci_write_config_byte(dev, drive_pci[drive->dn], pio_modes[pio]);
-
- if (svwks_csb_check(dev)) {
- u16 csb_pio = 0;
-
- pci_read_config_word(dev, 0x4a, &csb_pio);
-
- csb_pio &= ~(0x0f << (4 * drive->dn));
- csb_pio |= (pio << (4 * drive->dn));
-
- pci_write_config_word(dev, 0x4a, csb_pio);
- }
-}
-
-static void svwks_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- static const u8 udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
- static const u8 dma_modes[] = { 0x77, 0x21, 0x20 };
- static const u8 drive_pci2[] = { 0x45, 0x44, 0x47, 0x46 };
-
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 unit = drive->dn & 1;
-
- u8 ultra_enable = 0, ultra_timing = 0, dma_timing = 0;
-
- pci_read_config_byte(dev, (0x56|hwif->channel), &ultra_timing);
- pci_read_config_byte(dev, 0x54, &ultra_enable);
-
- ultra_timing &= ~(0x0F << (4*unit));
- ultra_enable &= ~(0x01 << drive->dn);
-
- if (speed >= XFER_UDMA_0) {
- dma_timing |= dma_modes[2];
- ultra_timing |= (udma_modes[speed - XFER_UDMA_0] << (4 * unit));
- ultra_enable |= (0x01 << drive->dn);
- } else if (speed >= XFER_MW_DMA_0)
- dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
-
- pci_write_config_byte(dev, drive_pci2[drive->dn], dma_timing);
- pci_write_config_byte(dev, (0x56|hwif->channel), ultra_timing);
- pci_write_config_byte(dev, 0x54, ultra_enable);
-}
-
-static unsigned int init_chipset_svwks(struct pci_dev *dev)
-{
- unsigned int reg;
- u8 btr;
-
- /* force Master Latency Timer value to 64 PCICLKs */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
-
- /* OSB4 : South Bridge and IDE */
- if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
- isa_dev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
- if (isa_dev) {
- pci_read_config_dword(isa_dev, 0x64, &reg);
- reg &= ~0x00002000; /* disable 600ns interrupt mask */
- if(!(reg & 0x00004000))
- printk(KERN_DEBUG DRV_NAME " %s: UDMA not BIOS "
- "enabled.\n", pci_name(dev));
- reg |= 0x00004000; /* enable UDMA/33 support */
- pci_write_config_dword(isa_dev, 0x64, reg);
- }
- }
-
- /* setup CSB5/CSB6 : South Bridge and IDE option RAID */
- else if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2)) {
-
- /* Third Channel Test */
- if (!(PCI_FUNC(dev->devfn) & 1)) {
- struct pci_dev * findev = NULL;
- u32 reg4c = 0;
- findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_CSB5, NULL);
- if (findev) {
- pci_read_config_dword(findev, 0x4C, &reg4c);
- reg4c &= ~0x000007FF;
- reg4c |= 0x00000040;
- reg4c |= 0x00000020;
- pci_write_config_dword(findev, 0x4C, reg4c);
- pci_dev_put(findev);
- }
- outb_p(0x06, 0x0c00);
- dev->irq = inb_p(0x0c01);
- } else {
- struct pci_dev * findev = NULL;
- u8 reg41 = 0;
-
- findev = pci_get_device(PCI_VENDOR_ID_SERVERWORKS,
- PCI_DEVICE_ID_SERVERWORKS_CSB6, NULL);
- if (findev) {
- pci_read_config_byte(findev, 0x41, &reg41);
- reg41 &= ~0x40;
- pci_write_config_byte(findev, 0x41, reg41);
- pci_dev_put(findev);
- }
- /*
- * This is a device pin issue on CSB6.
- * Since there will be a future raid mode,
- * early versions of the chipset require the
- * interrupt pin to be set, and it is a compatibility
- * mode issue.
- */
- if ((dev->class >> 8) == PCI_CLASS_STORAGE_IDE)
- dev->irq = 0;
- }
-// pci_read_config_dword(dev, 0x40, &pioreg)
-// pci_write_config_dword(dev, 0x40, 0x99999999);
-// pci_read_config_dword(dev, 0x44, &dmareg);
-// pci_write_config_dword(dev, 0x44, 0xFFFFFFFF);
- /* setup the UDMA Control register
- *
- * 1. clear bit 6 to enable DMA
- * 2. enable DMA modes with bits 0-1
- * 00 : legacy
- * 01 : udma2
- * 10 : udma2/udma4
- * 11 : udma2/udma4/udma5
- */
- pci_read_config_byte(dev, 0x5A, &btr);
- btr &= ~0x40;
- if (!(PCI_FUNC(dev->devfn) & 1))
- btr |= 0x2;
- else
- btr |= (dev->revision >= SVWKS_CSB5_REVISION_NEW) ? 0x3 : 0x2;
- pci_write_config_byte(dev, 0x5A, btr);
- }
- /* Setup HT1000 SouthBridge Controller - Single Channel Only */
- else if (dev->device == PCI_DEVICE_ID_SERVERWORKS_HT1000IDE) {
- pci_read_config_byte(dev, 0x5A, &btr);
- btr &= ~0x40;
- btr |= 0x3;
- pci_write_config_byte(dev, 0x5A, btr);
- }
-
- return dev->irq;
-}
-
-static u8 ata66_svwks_svwks(ide_hwif_t *hwif)
-{
- return ATA_CBL_PATA80;
-}
-
-/* On Dell PowerEdge servers with a CSB5/CSB6, the top two bits
- * of the subsystem device ID indicate presence of an 80-pin cable.
- * Bit 15 clear = secondary IDE channel does not have 80-pin cable.
- * Bit 15 set = secondary IDE channel has 80-pin cable.
- * Bit 14 clear = primary IDE channel does not have 80-pin cable.
- * Bit 14 set = primary IDE channel has 80-pin cable.
- */
-static u8 ata66_svwks_dell(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE ||
- dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE))
- return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- return ATA_CBL_PATA40;
-}
-
-/* Sun Cobalt Alpine hardware avoids the 80-pin cable
- * detect issue by attaching the drives directly to the board.
- * This check follows the Dell precedent (how scary is that?!)
- *
- * WARNING: this only works on Alpine hardware!
- */
-static u8 ata66_svwks_cobalt(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN &&
- dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
- dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
- return ((1 << (hwif->channel + 14)) &
- dev->subsystem_device) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
- return ATA_CBL_PATA40;
-}
-
-static u8 svwks_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
-
- /* Server Works */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SERVERWORKS)
- return ata66_svwks_svwks (hwif);
-
- /* Dell PowerEdge */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL)
- return ata66_svwks_dell (hwif);
-
- /* Cobalt Alpine */
- if (dev->subsystem_vendor == PCI_VENDOR_ID_SUN)
- return ata66_svwks_cobalt (hwif);
-
- /* Per Specified Design by OEM, and ASIC Architect */
- if ((dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE) ||
- (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2))
- return ATA_CBL_PATA80;
-
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops osb4_port_ops = {
- .set_pio_mode = svwks_set_pio_mode,
- .set_dma_mode = svwks_set_dma_mode,
- .udma_filter = svwks_udma_filter,
-};
-
-static const struct ide_port_ops svwks_port_ops = {
- .set_pio_mode = svwks_set_pio_mode,
- .set_dma_mode = svwks_set_dma_mode,
- .udma_filter = svwks_udma_filter,
- .cable_detect = svwks_cable_detect,
-};
-
-#define IDE_HFLAGS_SVWKS IDE_HFLAG_LEGACY_IRQS
-
-static const struct ide_port_info serverworks_chipsets[] __devinitdata = {
- { /* 0: OSB4 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &osb4_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = 0x00, /* UDMA is problematic on OSB4 */
- },
- { /* 1: CSB5 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 2: CSB6 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 3: CSB6-2 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- },
- { /* 4: HT1000 */
- .name = DRV_NAME,
- .init_chipset = init_chipset_svwks,
- .port_ops = &svwks_port_ops,
- .host_flags = IDE_HFLAGS_SVWKS | IDE_HFLAG_SINGLE,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA5,
- }
-};
-
-/**
- * svwks_init_one - called when a OSB/CSB is found
- * @dev: the svwks device
- * @id: the matching pci id
- *
- * Called when the PCI registration layer (or the IDE initialization)
- * finds a device matching our IDE device tables.
- */
-
-static int __devinit svwks_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d;
- u8 idx = id->driver_data;
-
- d = serverworks_chipsets[idx];
-
- if (idx == 1)
- d.host_flags |= IDE_HFLAG_CLEAR_SIMPLEX;
- else if (idx == 2 || idx == 3) {
- if ((PCI_FUNC(dev->devfn) & 1) == 0) {
- if (pci_resource_start(dev, 0) != 0x01f1)
- d.host_flags |= IDE_HFLAG_NON_BOOTABLE;
- d.host_flags |= IDE_HFLAG_SINGLE;
- } else
- d.host_flags &= ~IDE_HFLAG_SINGLE;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id svwks_pci_tbl[] = {
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4IDE), 0 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5IDE), 1 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE), 2 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2), 3 },
- { PCI_VDEVICE(SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000IDE), 4 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, svwks_pci_tbl);
-
-static struct pci_driver svwks_pci_driver = {
- .name = "Serverworks_IDE",
- .id_table = svwks_pci_tbl,
- .probe = svwks_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init svwks_ide_init(void)
-{
- return ide_pci_register_driver(&svwks_pci_driver);
-}
-
-static void __exit svwks_ide_exit(void)
-{
- pci_unregister_driver(&svwks_pci_driver);
-}
-
-module_init(svwks_ide_init);
-module_exit(svwks_ide_exit);
-
-MODULE_AUTHOR("Michael Aubry. Andrzej Krzysztofowicz, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for Serverworks OSB4/CSB5/CSB6 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/sgiioc4.c b/drivers/ide/pci/sgiioc4.c
deleted file mode 100644
index 8af9b23499fd..000000000000
--- a/drivers/ide/pci/sgiioc4.c
+++ /dev/null
@@ -1,674 +0,0 @@
-/*
- * Copyright (c) 2003-2006 Silicon Graphics, Inc. All Rights Reserved.
- * Copyright (C) 2008 MontaVista Software, Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of version 2 of the GNU General Public License
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it would be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
- *
- * You should have received a copy of the GNU General Public
- * License along with this program; if not, write the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * For further information regarding this notice, see:
- *
- * http://oss.sgi.com/projects/GenInfo/NoticeExplan
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <linux/scatterlist.h>
-#include <linux/ioc4.h>
-#include <asm/io.h>
-
-#include <linux/ide.h>
-
-#define DRV_NAME "SGIIOC4"
-
-/* IOC4 Specific Definitions */
-#define IOC4_CMD_OFFSET 0x100
-#define IOC4_CTRL_OFFSET 0x120
-#define IOC4_DMA_OFFSET 0x140
-#define IOC4_INTR_OFFSET 0x0
-
-#define IOC4_TIMING 0x00
-#define IOC4_DMA_PTR_L 0x01
-#define IOC4_DMA_PTR_H 0x02
-#define IOC4_DMA_ADDR_L 0x03
-#define IOC4_DMA_ADDR_H 0x04
-#define IOC4_BC_DEV 0x05
-#define IOC4_BC_MEM 0x06
-#define IOC4_DMA_CTRL 0x07
-#define IOC4_DMA_END_ADDR 0x08
-
-/* Bits in the IOC4 Control/Status Register */
-#define IOC4_S_DMA_START 0x01
-#define IOC4_S_DMA_STOP 0x02
-#define IOC4_S_DMA_DIR 0x04
-#define IOC4_S_DMA_ACTIVE 0x08
-#define IOC4_S_DMA_ERROR 0x10
-#define IOC4_ATA_MEMERR 0x02
-
-/* Read/Write Directions */
-#define IOC4_DMA_WRITE 0x04
-#define IOC4_DMA_READ 0x00
-
-/* Interrupt Register Offsets */
-#define IOC4_INTR_REG 0x03
-#define IOC4_INTR_SET 0x05
-#define IOC4_INTR_CLEAR 0x07
-
-#define IOC4_IDE_CACHELINE_SIZE 128
-#define IOC4_CMD_CTL_BLK_SIZE 0x20
-#define IOC4_SUPPORTED_FIRMWARE_REV 46
-
-typedef struct {
- u32 timing_reg0;
- u32 timing_reg1;
- u32 low_mem_ptr;
- u32 high_mem_ptr;
- u32 low_mem_addr;
- u32 high_mem_addr;
- u32 dev_byte_count;
- u32 mem_byte_count;
- u32 status;
-} ioc4_dma_regs_t;
-
-/* Each Physical Region Descriptor Entry size is 16 bytes (2 * 64 bits) */
-/* IOC4 has only 1 IDE channel */
-#define IOC4_PRD_BYTES 16
-#define IOC4_PRD_ENTRIES (PAGE_SIZE /(4*IOC4_PRD_BYTES))
-
-
-static void
-sgiioc4_init_hwif_ports(hw_regs_t * hw, unsigned long data_port,
- unsigned long ctrl_port, unsigned long irq_port)
-{
- unsigned long reg = data_port;
- int i;
-
- /* Registers are word (32 bit) aligned */
- for (i = 0; i <= 7; i++)
- hw->io_ports_array[i] = reg + i * 4;
-
- hw->io_ports.ctl_addr = ctrl_port;
- hw->io_ports.irq_addr = irq_port;
-}
-
-static int
-sgiioc4_checkirq(ide_hwif_t * hwif)
-{
- unsigned long intr_addr =
- hwif->io_ports.irq_addr + IOC4_INTR_REG * 4;
-
- if ((u8)readl((void __iomem *)intr_addr) & 0x03)
- return 1;
-
- return 0;
-}
-
-static u8 sgiioc4_read_status(ide_hwif_t *);
-
-static int
-sgiioc4_clearirq(ide_drive_t * drive)
-{
- u32 intr_reg;
- ide_hwif_t *hwif = HWIF(drive);
- struct ide_io_ports *io_ports = &hwif->io_ports;
- unsigned long other_ir = io_ports->irq_addr + (IOC4_INTR_REG << 2);
-
- /* Code to check for PCI error conditions */
- intr_reg = readl((void __iomem *)other_ir);
- if (intr_reg & 0x03) { /* Valid IOC4-IDE interrupt */
- /*
- * Using sgiioc4_read_status to read the Status register has a
- * side effect of clearing the interrupt. The first read should
- * clear it if it is set. The second read should return
- * a "clear" status if it got cleared. If not, then spin
- * for a bit trying to clear it.
- */
- u8 stat = sgiioc4_read_status(hwif);
- int count = 0;
-
- stat = sgiioc4_read_status(hwif);
- while ((stat & ATA_BUSY) && (count++ < 100)) {
- udelay(1);
- stat = sgiioc4_read_status(hwif);
- }
-
- if (intr_reg & 0x02) {
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- /* Error when transferring DMA data on PCI bus */
- u32 pci_err_addr_low, pci_err_addr_high,
- pci_stat_cmd_reg;
-
- pci_err_addr_low =
- readl((void __iomem *)io_ports->irq_addr);
- pci_err_addr_high =
- readl((void __iomem *)(io_ports->irq_addr + 4));
- pci_read_config_dword(dev, PCI_COMMAND,
- &pci_stat_cmd_reg);
- printk(KERN_ERR
- "%s(%s) : PCI Bus Error when doing DMA:"
- " status-cmd reg is 0x%x\n",
- __func__, drive->name, pci_stat_cmd_reg);
- printk(KERN_ERR
- "%s(%s) : PCI Error Address is 0x%x%x\n",
- __func__, drive->name,
- pci_err_addr_high, pci_err_addr_low);
- /* Clear the PCI Error indicator */
- pci_write_config_dword(dev, PCI_COMMAND, 0x00000146);
- }
-
- /* Clear the Interrupt, Error bits on the IOC4 */
- writel(0x03, (void __iomem *)other_ir);
-
- intr_reg = readl((void __iomem *)other_ir);
- }
-
- return intr_reg & 3;
-}
-
-static void sgiioc4_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long ioc4_dma_addr = hwif->dma_base + IOC4_DMA_CTRL * 4;
- unsigned int reg = readl((void __iomem *)ioc4_dma_addr);
- unsigned int temp_reg = reg | IOC4_S_DMA_START;
-
- writel(temp_reg, (void __iomem *)ioc4_dma_addr);
-}
-
-static u32
-sgiioc4_ide_dma_stop(ide_hwif_t *hwif, u64 dma_base)
-{
- unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
- u32 ioc4_dma;
- int count;
-
- count = 0;
- ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
- while ((ioc4_dma & IOC4_S_DMA_STOP) && (count++ < 200)) {
- udelay(1);
- ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
- }
- return ioc4_dma;
-}
-
-/* Stops the IOC4 DMA Engine */
-static int sgiioc4_dma_end(ide_drive_t *drive)
-{
- u32 ioc4_dma, bc_dev, bc_mem, num, valid = 0, cnt = 0;
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long dma_base = hwif->dma_base;
- int dma_stat = 0;
- unsigned long *ending_dma = ide_get_hwifdata(hwif);
-
- writel(IOC4_S_DMA_STOP, (void __iomem *)(dma_base + IOC4_DMA_CTRL * 4));
-
- ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
-
- if (ioc4_dma & IOC4_S_DMA_STOP) {
- printk(KERN_ERR
- "%s(%s): IOC4 DMA STOP bit is still 1 :"
- "ioc4_dma_reg 0x%x\n",
- __func__, drive->name, ioc4_dma);
- dma_stat = 1;
- }
-
- /*
- * The IOC4 will DMA 1's to the ending dma area to indicate that
- * previous data DMA is complete. This is necessary because of relaxed
- * ordering between register reads and DMA writes on the Altix.
- */
- while ((cnt++ < 200) && (!valid)) {
- for (num = 0; num < 16; num++) {
- if (ending_dma[num]) {
- valid = 1;
- break;
- }
- }
- udelay(1);
- }
- if (!valid) {
- printk(KERN_ERR "%s(%s) : DMA incomplete\n", __func__,
- drive->name);
- dma_stat = 1;
- }
-
- bc_dev = readl((void __iomem *)(dma_base + IOC4_BC_DEV * 4));
- bc_mem = readl((void __iomem *)(dma_base + IOC4_BC_MEM * 4));
-
- if ((bc_dev & 0x01FF) || (bc_mem & 0x1FF)) {
- if (bc_dev > bc_mem + 8) {
- printk(KERN_ERR
- "%s(%s): WARNING!! byte_count_dev %d "
- "!= byte_count_mem %d\n",
- __func__, drive->name, bc_dev, bc_mem);
- }
- }
-
- drive->waiting_for_dma = 0;
- ide_destroy_dmatable(drive);
-
- return dma_stat;
-}
-
-static void sgiioc4_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int sgiioc4_dma_test_irq(ide_drive_t *drive)
-{
- return sgiioc4_checkirq(HWIF(drive));
-}
-
-static void sgiioc4_dma_host_set(ide_drive_t *drive, int on)
-{
- if (!on)
- sgiioc4_clearirq(drive);
-}
-
-static void
-sgiioc4_resetproc(ide_drive_t * drive)
-{
- sgiioc4_dma_end(drive);
- sgiioc4_clearirq(drive);
-}
-
-static void
-sgiioc4_dma_lost_irq(ide_drive_t * drive)
-{
- sgiioc4_resetproc(drive);
-
- ide_dma_lost_irq(drive);
-}
-
-static u8 sgiioc4_read_status(ide_hwif_t *hwif)
-{
- unsigned long port = hwif->io_ports.status_addr;
- u8 reg = (u8) readb((void __iomem *) port);
-
- if (!(reg & ATA_BUSY)) { /* Not busy... check for interrupt */
- unsigned long other_ir = port - 0x110;
- unsigned int intr_reg = (u32) readl((void __iomem *) other_ir);
-
- /* Clear the Interrupt, Error bits on the IOC4 */
- if (intr_reg & 0x03) {
- writel(0x03, (void __iomem *) other_ir);
- intr_reg = (u32) readl((void __iomem *) other_ir);
- }
- }
-
- return reg;
-}
-
-/* Creates a dma map for the scatter-gather list entries */
-static int __devinit
-ide_dma_sgiioc4(ide_hwif_t *hwif, const struct ide_port_info *d)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long dma_base = pci_resource_start(dev, 0) + IOC4_DMA_OFFSET;
- int num_ports = sizeof (ioc4_dma_regs_t);
- void *pad;
-
- printk(KERN_INFO " %s: MMIO-DMA\n", hwif->name);
-
- if (request_mem_region(dma_base, num_ports, hwif->name) == NULL) {
- printk(KERN_ERR "%s(%s) -- ERROR: addresses 0x%08lx to 0x%08lx "
- "already in use\n", __func__, hwif->name,
- dma_base, dma_base + num_ports - 1);
- return -1;
- }
-
- hwif->dma_base = (unsigned long)hwif->io_ports.irq_addr +
- IOC4_DMA_OFFSET;
-
- hwif->sg_max_nents = IOC4_PRD_ENTRIES;
-
- hwif->prd_max_nents = IOC4_PRD_ENTRIES;
- hwif->prd_ent_size = IOC4_PRD_BYTES;
-
- if (ide_allocate_dma_engine(hwif))
- goto dma_pci_alloc_failure;
-
- pad = pci_alloc_consistent(dev, IOC4_IDE_CACHELINE_SIZE,
- (dma_addr_t *)&hwif->extra_base);
- if (pad) {
- ide_set_hwifdata(hwif, pad);
- return 0;
- }
-
- ide_release_dma_engine(hwif);
-
- printk(KERN_ERR "%s(%s) -- ERROR: Unable to allocate DMA maps\n",
- __func__, hwif->name);
- printk(KERN_INFO "%s: changing from DMA to PIO mode", hwif->name);
-
-dma_pci_alloc_failure:
- release_mem_region(dma_base, num_ports);
-
- return -1;
-}
-
-/* Initializes the IOC4 DMA Engine */
-static void
-sgiioc4_configure_for_dma(int dma_direction, ide_drive_t * drive)
-{
- u32 ioc4_dma;
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long dma_base = hwif->dma_base;
- unsigned long ioc4_dma_addr = dma_base + IOC4_DMA_CTRL * 4;
- u32 dma_addr, ending_dma_addr;
-
- ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
-
- if (ioc4_dma & IOC4_S_DMA_ACTIVE) {
- printk(KERN_WARNING
- "%s(%s):Warning!! DMA from previous transfer was still active\n",
- __func__, drive->name);
- writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
- ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
-
- if (ioc4_dma & IOC4_S_DMA_STOP)
- printk(KERN_ERR
- "%s(%s) : IOC4 Dma STOP bit is still 1\n",
- __func__, drive->name);
- }
-
- ioc4_dma = readl((void __iomem *)ioc4_dma_addr);
- if (ioc4_dma & IOC4_S_DMA_ERROR) {
- printk(KERN_WARNING
- "%s(%s) : Warning!! - DMA Error during Previous"
- " transfer | status 0x%x\n",
- __func__, drive->name, ioc4_dma);
- writel(IOC4_S_DMA_STOP, (void __iomem *)ioc4_dma_addr);
- ioc4_dma = sgiioc4_ide_dma_stop(hwif, dma_base);
-
- if (ioc4_dma & IOC4_S_DMA_STOP)
- printk(KERN_ERR
- "%s(%s) : IOC4 DMA STOP bit is still 1\n",
- __func__, drive->name);
- }
-
- /* Address of the Scatter Gather List */
- dma_addr = cpu_to_le32(hwif->dmatable_dma);
- writel(dma_addr, (void __iomem *)(dma_base + IOC4_DMA_PTR_L * 4));
-
- /* Address of the Ending DMA */
- memset(ide_get_hwifdata(hwif), 0, IOC4_IDE_CACHELINE_SIZE);
- ending_dma_addr = cpu_to_le32(hwif->extra_base);
- writel(ending_dma_addr, (void __iomem *)(dma_base + IOC4_DMA_END_ADDR * 4));
-
- writel(dma_direction, (void __iomem *)ioc4_dma_addr);
- drive->waiting_for_dma = 1;
-}
-
-/* IOC4 Scatter Gather list Format */
-/* 128 Bit entries to support 64 bit addresses in the future */
-/* The Scatter Gather list Entry should be in the BIG-ENDIAN Format */
-/* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero | Lower 32 bits- address | */
-/* --------------------------------------------------------------------- */
-/* | Upper 32 bits - Zero |EOL| 15 unused | 16 Bit Length| */
-/* --------------------------------------------------------------------- */
-/* Creates the scatter gather list, DMA Table */
-static unsigned int
-sgiioc4_build_dma_table(ide_drive_t * drive, struct request *rq, int ddir)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned int *table = hwif->dmatable_cpu;
- unsigned int count = 0, i = 1;
- struct scatterlist *sg;
-
- hwif->sg_nents = i = ide_build_sglist(drive, rq);
-
- if (!i)
- return 0; /* sglist of length Zero */
-
- sg = hwif->sg_table;
- while (i && sg_dma_len(sg)) {
- dma_addr_t cur_addr;
- int cur_len;
- cur_addr = sg_dma_address(sg);
- cur_len = sg_dma_len(sg);
-
- while (cur_len) {
- if (count++ >= IOC4_PRD_ENTRIES) {
- printk(KERN_WARNING
- "%s: DMA table too small\n",
- drive->name);
- goto use_pio_instead;
- } else {
- u32 bcount =
- 0x10000 - (cur_addr & 0xffff);
-
- if (bcount > cur_len)
- bcount = cur_len;
-
- /* put the addr, length in
- * the IOC4 dma-table format */
- *table = 0x0;
- table++;
- *table = cpu_to_be32(cur_addr);
- table++;
- *table = 0x0;
- table++;
-
- *table = cpu_to_be32(bcount);
- table++;
-
- cur_addr += bcount;
- cur_len -= bcount;
- }
- }
-
- sg = sg_next(sg);
- i--;
- }
-
- if (count) {
- table--;
- *table |= cpu_to_be32(0x80000000);
- return count;
- }
-
-use_pio_instead:
- ide_destroy_dmatable(drive);
-
- return 0; /* revert to PIO for this request */
-}
-
-static int sgiioc4_dma_setup(ide_drive_t *drive)
-{
- struct request *rq = HWGROUP(drive)->rq;
- unsigned int count = 0;
- int ddir;
-
- if (rq_data_dir(rq))
- ddir = PCI_DMA_TODEVICE;
- else
- ddir = PCI_DMA_FROMDEVICE;
-
- if (!(count = sgiioc4_build_dma_table(drive, rq, ddir))) {
- /* try PIO instead of DMA */
- ide_map_sg(drive, rq);
- return 1;
- }
-
- if (rq_data_dir(rq))
- /* Writes TO the IOC4 FROM Main Memory */
- ddir = IOC4_DMA_READ;
- else
- /* Writes FROM the IOC4 TO Main Memory */
- ddir = IOC4_DMA_WRITE;
-
- sgiioc4_configure_for_dma(ddir, drive);
-
- return 0;
-}
-
-static const struct ide_tp_ops sgiioc4_tp_ops = {
- .exec_command = ide_exec_command,
- .read_status = sgiioc4_read_status,
- .read_altstatus = ide_read_altstatus,
- .read_sff_dma_status = ide_read_sff_dma_status,
-
- .set_irq = ide_set_irq,
-
- .tf_load = ide_tf_load,
- .tf_read = ide_tf_read,
-
- .input_data = ide_input_data,
- .output_data = ide_output_data,
-};
-
-static const struct ide_port_ops sgiioc4_port_ops = {
- .set_dma_mode = sgiioc4_set_dma_mode,
- /* reset DMA engine, clear IRQs */
- .resetproc = sgiioc4_resetproc,
-};
-
-static const struct ide_dma_ops sgiioc4_dma_ops = {
- .dma_host_set = sgiioc4_dma_host_set,
- .dma_setup = sgiioc4_dma_setup,
- .dma_start = sgiioc4_dma_start,
- .dma_end = sgiioc4_dma_end,
- .dma_test_irq = sgiioc4_dma_test_irq,
- .dma_lost_irq = sgiioc4_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info sgiioc4_port_info __devinitdata = {
- .name = DRV_NAME,
- .chipset = ide_pci,
- .init_dma = ide_dma_sgiioc4,
- .tp_ops = &sgiioc4_tp_ops,
- .port_ops = &sgiioc4_port_ops,
- .dma_ops = &sgiioc4_dma_ops,
- .host_flags = IDE_HFLAG_MMIO,
- .mwdma_mask = ATA_MWDMA2_ONLY,
-};
-
-static int __devinit
-sgiioc4_ide_setup_pci_device(struct pci_dev *dev)
-{
- unsigned long cmd_base, irqport;
- unsigned long bar0, cmd_phys_base, ctl;
- void __iomem *virt_base;
- struct ide_host *host;
- hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL };
- struct ide_port_info d = sgiioc4_port_info;
- int rc;
-
- /* Get the CmdBlk and CtrlBlk Base Registers */
- bar0 = pci_resource_start(dev, 0);
- virt_base = ioremap(bar0, pci_resource_len(dev, 0));
- if (virt_base == NULL) {
- printk(KERN_ERR "%s: Unable to remap BAR 0 address: 0x%lx\n",
- DRV_NAME, bar0);
- return -ENOMEM;
- }
- cmd_base = (unsigned long) virt_base + IOC4_CMD_OFFSET;
- ctl = (unsigned long) virt_base + IOC4_CTRL_OFFSET;
- irqport = (unsigned long) virt_base + IOC4_INTR_OFFSET;
-
- cmd_phys_base = bar0 + IOC4_CMD_OFFSET;
- if (request_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE,
- DRV_NAME) == NULL) {
- printk(KERN_ERR "%s %s -- ERROR: addresses 0x%08lx to 0x%08lx "
- "already in use\n", DRV_NAME, pci_name(dev),
- cmd_phys_base, cmd_phys_base + IOC4_CMD_CTL_BLK_SIZE);
- return -EBUSY;
- }
-
- /* Initialize the IO registers */
- memset(&hw, 0, sizeof(hw));
- sgiioc4_init_hwif_ports(&hw, cmd_base, ctl, irqport);
- hw.irq = dev->irq;
- hw.chipset = ide_pci;
- hw.dev = &dev->dev;
-
- /* Initializing chipset IRQ Registers */
- writel(0x03, (void __iomem *)(irqport + IOC4_INTR_SET * 4));
-
- host = ide_host_alloc(&d, hws);
- if (host == NULL) {
- rc = -ENOMEM;
- goto err;
- }
-
- rc = ide_host_register(host, &d, hws);
- if (rc)
- goto err_free;
-
- return 0;
-err_free:
- ide_host_free(host);
-err:
- release_mem_region(cmd_phys_base, IOC4_CMD_CTL_BLK_SIZE);
- iounmap(virt_base);
- return rc;
-}
-
-static unsigned int __devinit
-pci_init_sgiioc4(struct pci_dev *dev)
-{
- int ret;
-
- printk(KERN_INFO "%s: IDE controller at PCI slot %s, revision %d\n",
- DRV_NAME, pci_name(dev), dev->revision);
-
- if (dev->revision < IOC4_SUPPORTED_FIRMWARE_REV) {
- printk(KERN_ERR "Skipping %s IDE controller in slot %s: "
- "firmware is obsolete - please upgrade to "
- "revision46 or higher\n",
- DRV_NAME, pci_name(dev));
- ret = -EAGAIN;
- goto out;
- }
- ret = sgiioc4_ide_setup_pci_device(dev);
-out:
- return ret;
-}
-
-int
-ioc4_ide_attach_one(struct ioc4_driver_data *idd)
-{
- /* PCI-RT does not bring out IDE connection.
- * Do not attach to this particular IOC4.
- */
- if (idd->idd_variant == IOC4_VARIANT_PCI_RT)
- return 0;
-
- return pci_init_sgiioc4(idd->idd_pdev);
-}
-
-static struct ioc4_submodule ioc4_ide_submodule = {
- .is_name = "IOC4_ide",
- .is_owner = THIS_MODULE,
- .is_probe = ioc4_ide_attach_one,
-/* .is_remove = ioc4_ide_remove_one, */
-};
-
-static int __init ioc4_ide_init(void)
-{
- return ioc4_register_submodule(&ioc4_ide_submodule);
-}
-
-late_initcall(ioc4_ide_init); /* Call only after IDE init is done */
-
-MODULE_AUTHOR("Aniket Malatpure/Jeremy Higdon");
-MODULE_DESCRIPTION("IDE PCI driver module for SGI IOC4 Base-IO Card");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c
deleted file mode 100644
index eb4faf92c571..000000000000
--- a/drivers/ide/pci/siimage.c
+++ /dev/null
@@ -1,857 +0,0 @@
-/*
- * Copyright (C) 2001-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2003 Red Hat <alan@redhat.com>
- * Copyright (C) 2007-2008 MontaVista Software, Inc.
- * Copyright (C) 2007-2008 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * Documentation for CMD680:
- * http://gkernel.sourceforge.net/specs/sii/sii-0680a-v1.31.pdf.bz2
- *
- * Documentation for SiI 3112:
- * http://gkernel.sourceforge.net/specs/sii/3112A_SiI-DS-0095-B2.pdf.bz2
- *
- * Errata and other documentation only available under NDA.
- *
- *
- * FAQ Items:
- * If you are using Marvell SATA-IDE adapters with Maxtor drives
- * ensure the system is set up for ATA100/UDMA5, not UDMA6.
- *
- * If you are using WD drives with SATA bridges you must set the
- * drive to "Single". "Master" will hang.
- *
- * If you have strange problems with nVidia chipset systems please
- * see the SI support documentation and update your system BIOS
- * if necessary
- *
- * The Dell DRAC4 has some interesting features including effectively hot
- * unplugging/replugging the virtual CD interface when the DRAC is reset.
- * This often causes drivers/ide/siimage to panic but is ok with the rather
- * smarter code in libata.
- *
- * TODO:
- * - IORDY fixes
- * - VDMA support
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#define DRV_NAME "siimage"
-
-/**
- * pdev_is_sata - check if device is SATA
- * @pdev: PCI device to check
- *
- * Returns true if this is a SATA controller
- */
-
-static int pdev_is_sata(struct pci_dev *pdev)
-{
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- switch (pdev->device) {
- case PCI_DEVICE_ID_SII_3112:
- case PCI_DEVICE_ID_SII_1210SA:
- return 1;
- case PCI_DEVICE_ID_SII_680:
- return 0;
- }
- BUG();
-#endif
- return 0;
-}
-
-/**
- * is_sata - check if hwif is SATA
- * @hwif: interface to check
- *
- * Returns true if this is a SATA controller
- */
-
-static inline int is_sata(ide_hwif_t *hwif)
-{
- return pdev_is_sata(to_pci_dev(hwif->dev));
-}
-
-/**
- * siimage_selreg - return register base
- * @hwif: interface
- * @r: config offset
- *
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
- * Thankfully this is a configuration operation, so isn't performance
- * critical.
- */
-
-static unsigned long siimage_selreg(ide_hwif_t *hwif, int r)
-{
- unsigned long base = (unsigned long)hwif->hwif_data;
-
- base += 0xA0 + r;
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- base += hwif->channel << 6;
- else
- base += hwif->channel << 4;
- return base;
-}
-
-/**
- * siimage_seldev - return register base
- * @hwif: interface
- * @r: config offset
- *
- * Turn a config register offset into the right address in either
- * PCI space or MMIO space to access the control register in question
- * including accounting for the unit shift.
- */
-
-static inline unsigned long siimage_seldev(ide_drive_t *drive, int r)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long base = (unsigned long)hwif->hwif_data;
- u8 unit = drive->dn & 1;
-
- base += 0xA0 + r;
- if (hwif->host_flags & IDE_HFLAG_MMIO)
- base += hwif->channel << 6;
- else
- base += hwif->channel << 4;
- base |= unit << unit;
- return base;
-}
-
-static u8 sil_ioread8(struct pci_dev *dev, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- u8 tmp = 0;
-
- if (host->host_priv)
- tmp = readb((void __iomem *)addr);
- else
- pci_read_config_byte(dev, addr, &tmp);
-
- return tmp;
-}
-
-static u16 sil_ioread16(struct pci_dev *dev, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- u16 tmp = 0;
-
- if (host->host_priv)
- tmp = readw((void __iomem *)addr);
- else
- pci_read_config_word(dev, addr, &tmp);
-
- return tmp;
-}
-
-static void sil_iowrite8(struct pci_dev *dev, u8 val, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- if (host->host_priv)
- writeb(val, (void __iomem *)addr);
- else
- pci_write_config_byte(dev, addr, val);
-}
-
-static void sil_iowrite16(struct pci_dev *dev, u16 val, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- if (host->host_priv)
- writew(val, (void __iomem *)addr);
- else
- pci_write_config_word(dev, addr, val);
-}
-
-static void sil_iowrite32(struct pci_dev *dev, u32 val, unsigned long addr)
-{
- struct ide_host *host = pci_get_drvdata(dev);
-
- if (host->host_priv)
- writel(val, (void __iomem *)addr);
- else
- pci_write_config_dword(dev, addr, val);
-}
-
-/**
- * sil_udma_filter - compute UDMA mask
- * @drive: IDE device
- *
- * Compute the available UDMA speeds for the device on the interface.
- *
- * For the CMD680 this depends on the clocking mode (scsc), for the
- * SI3112 SATA controller life is a bit simpler.
- */
-
-static u8 sil_pata_udma_filter(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = (unsigned long)hwif->hwif_data;
- u8 scsc, mask = 0;
-
- base += (hwif->host_flags & IDE_HFLAG_MMIO) ? 0x4A : 0x8A;
-
- scsc = sil_ioread8(dev, base);
-
- switch (scsc & 0x30) {
- case 0x10: /* 133 */
- mask = ATA_UDMA6;
- break;
- case 0x20: /* 2xPCI */
- mask = ATA_UDMA6;
- break;
- case 0x00: /* 100 */
- mask = ATA_UDMA5;
- break;
- default: /* Disabled ? */
- BUG();
- }
-
- return mask;
-}
-
-static u8 sil_sata_udma_filter(ide_drive_t *drive)
-{
- char *m = (char *)&drive->id[ATA_ID_PROD];
-
- return strstr(m, "Maxtor") ? ATA_UDMA5 : ATA_UDMA6;
-}
-
-/**
- * sil_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * Load the timing settings for this device mode into the
- * controller. If we are in PIO mode 3 or 4 turn on IORDY
- * monitoring (bit 9). The TF timing is bits 31:16
- */
-
-static void sil_set_pio_mode(ide_drive_t *drive, u8 pio)
-{
- static const u16 tf_speed[] = { 0x328a, 0x2283, 0x1281, 0x10c3, 0x10c1 };
- static const u16 data_speed[] = { 0x328a, 0x2283, 0x1104, 0x10c3, 0x10c1 };
-
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- ide_drive_t *pair = ide_get_pair_dev(drive);
- u32 speedt = 0;
- u16 speedp = 0;
- unsigned long addr = siimage_seldev(drive, 0x04);
- unsigned long tfaddr = siimage_selreg(hwif, 0x02);
- unsigned long base = (unsigned long)hwif->hwif_data;
- u8 tf_pio = pio;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
- : (mmio ? 0xB4 : 0x80);
- u8 mode = 0;
- u8 unit = drive->dn & 1;
-
- /* trim *taskfile* PIO to the slowest of the master/slave */
- if (pair) {
- u8 pair_pio = ide_get_best_pio_mode(pair, 255, 4);
-
- if (pair_pio < tf_pio)
- tf_pio = pair_pio;
- }
-
- /* cheat for now and use the docs */
- speedp = data_speed[pio];
- speedt = tf_speed[tf_pio];
-
- sil_iowrite16(dev, speedp, addr);
- sil_iowrite16(dev, speedt, tfaddr);
-
- /* now set up IORDY */
- speedp = sil_ioread16(dev, tfaddr - 2);
- speedp &= ~0x200;
- if (pio > 2)
- speedp |= 0x200;
- sil_iowrite16(dev, speedp, tfaddr - 2);
-
- mode = sil_ioread8(dev, base + addr_mask);
- mode &= ~(unit ? 0x30 : 0x03);
- mode |= unit ? 0x10 : 0x01;
- sil_iowrite8(dev, mode, base + addr_mask);
-}
-
-/**
- * sil_set_dma_mode - set host controller for DMA mode
- * @drive: drive
- * @speed: DMA mode
- *
- * Tune the SiI chipset for the desired DMA mode.
- */
-
-static void sil_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- static const u8 ultra6[] = { 0x0F, 0x0B, 0x07, 0x05, 0x03, 0x02, 0x01 };
- static const u8 ultra5[] = { 0x0C, 0x07, 0x05, 0x04, 0x02, 0x01 };
- static const u16 dma[] = { 0x2208, 0x10C2, 0x10C1 };
-
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long base = (unsigned long)hwif->hwif_data;
- u16 ultra = 0, multi = 0;
- u8 mode = 0, unit = drive->dn & 1;
- u8 mmio = (hwif->host_flags & IDE_HFLAG_MMIO) ? 1 : 0;
- u8 scsc = 0, addr_mask = hwif->channel ? (mmio ? 0xF4 : 0x84)
- : (mmio ? 0xB4 : 0x80);
- unsigned long ma = siimage_seldev(drive, 0x08);
- unsigned long ua = siimage_seldev(drive, 0x0C);
-
- scsc = sil_ioread8 (dev, base + (mmio ? 0x4A : 0x8A));
- mode = sil_ioread8 (dev, base + addr_mask);
- multi = sil_ioread16(dev, ma);
- ultra = sil_ioread16(dev, ua);
-
- mode &= ~(unit ? 0x30 : 0x03);
- ultra &= ~0x3F;
- scsc = ((scsc & 0x30) == 0x00) ? 0 : 1;
-
- scsc = is_sata(hwif) ? 1 : scsc;
-
- if (speed >= XFER_UDMA_0) {
- multi = dma[2];
- ultra |= scsc ? ultra6[speed - XFER_UDMA_0] :
- ultra5[speed - XFER_UDMA_0];
- mode |= unit ? 0x30 : 0x03;
- } else {
- multi = dma[speed - XFER_MW_DMA_0];
- mode |= unit ? 0x20 : 0x02;
- }
-
- sil_iowrite8 (dev, mode, base + addr_mask);
- sil_iowrite16(dev, multi, ma);
- sil_iowrite16(dev, ultra, ua);
-}
-
-/* returns 1 if dma irq issued, 0 otherwise */
-static int siimage_io_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 dma_altstat = 0;
- unsigned long addr = siimage_selreg(hwif, 1);
-
- /* return 1 if INTR asserted */
- if (inb(hwif->dma_base + ATA_DMA_STATUS) & 4)
- return 1;
-
- /* return 1 if Device INTR asserted */
- pci_read_config_byte(dev, addr, &dma_altstat);
- if (dma_altstat & 8)
- return 0; /* return 1; */
-
- return 0;
-}
-
-/**
- * siimage_mmio_dma_test_irq - check we caused an IRQ
- * @drive: drive we are testing
- *
- * Check if we caused an IDE DMA interrupt. We may also have caused
- * SATA status interrupts, if so we clean them up and continue.
- */
-
-static int siimage_mmio_dma_test_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long addr = siimage_selreg(hwif, 0x1);
- void __iomem *sata_error_addr
- = (void __iomem *)hwif->sata_scr[SATA_ERROR_OFFSET];
-
- if (sata_error_addr) {
- unsigned long base = (unsigned long)hwif->hwif_data;
- u32 ext_stat = readl((void __iomem *)(base + 0x10));
- u8 watchdog = 0;
-
- if (ext_stat & ((hwif->channel) ? 0x40 : 0x10)) {
- u32 sata_error = readl(sata_error_addr);
-
- writel(sata_error, sata_error_addr);
- watchdog = (sata_error & 0x00680000) ? 1 : 0;
- printk(KERN_WARNING "%s: sata_error = 0x%08x, "
- "watchdog = %d, %s\n",
- drive->name, sata_error, watchdog, __func__);
- } else
- watchdog = (ext_stat & 0x8000) ? 1 : 0;
-
- ext_stat >>= 16;
- if (!(ext_stat & 0x0404) && !watchdog)
- return 0;
- }
-
- /* return 1 if INTR asserted */
- if (readb((void __iomem *)(hwif->dma_base + ATA_DMA_STATUS)) & 4)
- return 1;
-
- /* return 1 if Device INTR asserted */
- if (readb((void __iomem *)addr) & 8)
- return 0; /* return 1; */
-
- return 0;
-}
-
-static int siimage_dma_test_irq(ide_drive_t *drive)
-{
- if (drive->hwif->host_flags & IDE_HFLAG_MMIO)
- return siimage_mmio_dma_test_irq(drive);
- else
- return siimage_io_dma_test_irq(drive);
-}
-
-/**
- * sil_sata_reset_poll - wait for SATA reset
- * @drive: drive we are resetting
- *
- * Poll the SATA phy and see whether it has come back from the dead
- * yet.
- */
-
-static int sil_sata_reset_poll(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- void __iomem *sata_status_addr
- = (void __iomem *)hwif->sata_scr[SATA_STATUS_OFFSET];
-
- if (sata_status_addr) {
- /* SATA Status is available only when in MMIO mode */
- u32 sata_stat = readl(sata_status_addr);
-
- if ((sata_stat & 0x03) != 0x03) {
- printk(KERN_WARNING "%s: reset phy dead, status=0x%08x\n",
- hwif->name, sata_stat);
- return -ENXIO;
- }
- }
-
- return 0;
-}
-
-/**
- * sil_sata_pre_reset - reset hook
- * @drive: IDE device being reset
- *
- * For the SATA devices we need to handle recalibration/geometry
- * differently
- */
-
-static void sil_sata_pre_reset(ide_drive_t *drive)
-{
- if (drive->media == ide_disk) {
- drive->special.b.set_geometry = 0;
- drive->special.b.recalibrate = 0;
- }
-}
-
-/**
- * init_chipset_siimage - set up an SI device
- * @dev: PCI device
- *
- * Perform the initial PCI set up for this device. Attempt to switch
- * to 133 MHz clocking if the system isn't already set up to do it.
- */
-
-static unsigned int init_chipset_siimage(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- void __iomem *ioaddr = host->host_priv;
- unsigned long base, scsc_addr;
- u8 rev = dev->revision, tmp;
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, rev ? 1 : 255);
-
- if (ioaddr)
- pci_set_master(dev);
-
- base = (unsigned long)ioaddr;
-
- if (ioaddr && pdev_is_sata(dev)) {
- u32 tmp32, irq_mask;
-
- /* make sure IDE0/1 interrupts are not masked */
- irq_mask = (1 << 22) | (1 << 23);
- tmp32 = readl(ioaddr + 0x48);
- if (tmp32 & irq_mask) {
- tmp32 &= ~irq_mask;
- writel(tmp32, ioaddr + 0x48);
- readl(ioaddr + 0x48); /* flush */
- }
- writel(0, ioaddr + 0x148);
- writel(0, ioaddr + 0x1C8);
- }
-
- sil_iowrite8(dev, 0, base ? (base + 0xB4) : 0x80);
- sil_iowrite8(dev, 0, base ? (base + 0xF4) : 0x84);
-
- scsc_addr = base ? (base + 0x4A) : 0x8A;
- tmp = sil_ioread8(dev, scsc_addr);
-
- switch (tmp & 0x30) {
- case 0x00:
- /* On 100 MHz clocking, try and switch to 133 MHz */
- sil_iowrite8(dev, tmp | 0x10, scsc_addr);
- break;
- case 0x30:
- /* Clocking is disabled, attempt to force 133MHz clocking. */
- sil_iowrite8(dev, tmp & ~0x20, scsc_addr);
- case 0x10:
- /* On 133Mhz clocking. */
- break;
- case 0x20:
- /* On PCIx2 clocking. */
- break;
- }
-
- tmp = sil_ioread8(dev, scsc_addr);
-
- sil_iowrite8 (dev, 0x72, base + 0xA1);
- sil_iowrite16(dev, 0x328A, base + 0xA2);
- sil_iowrite32(dev, 0x62DD62DD, base + 0xA4);
- sil_iowrite32(dev, 0x43924392, base + 0xA8);
- sil_iowrite32(dev, 0x40094009, base + 0xAC);
- sil_iowrite8 (dev, 0x72, base ? (base + 0xE1) : 0xB1);
- sil_iowrite16(dev, 0x328A, base ? (base + 0xE2) : 0xB2);
- sil_iowrite32(dev, 0x62DD62DD, base ? (base + 0xE4) : 0xB4);
- sil_iowrite32(dev, 0x43924392, base ? (base + 0xE8) : 0xB8);
- sil_iowrite32(dev, 0x40094009, base ? (base + 0xEC) : 0xBC);
-
- if (base && pdev_is_sata(dev)) {
- writel(0xFFFF0000, ioaddr + 0x108);
- writel(0xFFFF0000, ioaddr + 0x188);
- writel(0x00680000, ioaddr + 0x148);
- writel(0x00680000, ioaddr + 0x1C8);
- }
-
- /* report the clocking mode of the controller */
- if (!pdev_is_sata(dev)) {
- static const char *clk_str[] =
- { "== 100", "== 133", "== 2X PCI", "DISABLED!" };
-
- tmp >>= 4;
- printk(KERN_INFO DRV_NAME " %s: BASE CLOCK %s\n",
- pci_name(dev), clk_str[tmp & 3]);
- }
-
- return 0;
-}
-
-/**
- * init_mmio_iops_siimage - set up the iops for MMIO
- * @hwif: interface to set up
- *
- * The basic setup here is fairly simple, we can use standard MMIO
- * operations. However we do have to set the taskfile register offsets
- * by hand as there isn't a standard defined layout for them this time.
- *
- * The hardware supports buffered taskfiles and also some rather nice
- * extended PRD tables. For better SI3112 support use the libata driver
- */
-
-static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- void *addr = host->host_priv;
- u8 ch = hwif->channel;
- struct ide_io_ports *io_ports = &hwif->io_ports;
- unsigned long base;
-
- /*
- * Fill in the basic hwif bits
- */
- hwif->host_flags |= IDE_HFLAG_MMIO;
-
- hwif->hwif_data = addr;
-
- /*
- * Now set up the hw. We have to do this ourselves as the
- * MMIO layout isn't the same as the standard port based I/O.
- */
- memset(io_ports, 0, sizeof(*io_ports));
-
- base = (unsigned long)addr;
- if (ch)
- base += 0xC0;
- else
- base += 0x80;
-
- /*
- * The buffered task file doesn't have status/control, so we
- * can't currently use it sanely since we want to use LBA48 mode.
- */
- io_ports->data_addr = base;
- io_ports->error_addr = base + 1;
- io_ports->nsect_addr = base + 2;
- io_ports->lbal_addr = base + 3;
- io_ports->lbam_addr = base + 4;
- io_ports->lbah_addr = base + 5;
- io_ports->device_addr = base + 6;
- io_ports->status_addr = base + 7;
- io_ports->ctl_addr = base + 10;
-
- if (pdev_is_sata(dev)) {
- base = (unsigned long)addr;
- if (ch)
- base += 0x80;
- hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104;
- hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108;
- hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100;
- }
-
- hwif->irq = dev->irq;
-
- hwif->dma_base = (unsigned long)addr + (ch ? 0x08 : 0x00);
-}
-
-static int is_dev_seagate_sata(ide_drive_t *drive)
-{
- const char *s = (const char *)&drive->id[ATA_ID_PROD];
- unsigned len = strnlen(s, ATA_ID_PROD_LEN);
-
- if ((len > 4) && (!memcmp(s, "ST", 2)))
- if ((!memcmp(s + len - 2, "AS", 2)) ||
- (!memcmp(s + len - 3, "ASL", 3))) {
- printk(KERN_INFO "%s: applying pessimistic Seagate "
- "errata fix\n", drive->name);
- return 1;
- }
-
- return 0;
-}
-
-/**
- * sil_quirkproc - post probe fixups
- * @drive: drive
- *
- * Called after drive probe we use this to decide whether the
- * Seagate fixup must be applied. This used to be in init_iops but
- * that can occur before we know what drives are present.
- */
-
-static void sil_quirkproc(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
-
- /* Try and rise the rqsize */
- if (!is_sata(hwif) || !is_dev_seagate_sata(drive))
- hwif->rqsize = 128;
-}
-
-/**
- * init_iops_siimage - set up iops
- * @hwif: interface to set up
- *
- * Do the basic setup for the SIIMAGE hardware interface
- * and then do the MMIO setup if we can. This is the first
- * look in we get for setting up the hwif so that we
- * can get the iops right before using them.
- */
-
-static void __devinit init_iops_siimage(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
-
- hwif->hwif_data = NULL;
-
- /* Pessimal until we finish probing */
- hwif->rqsize = 15;
-
- if (host->host_priv)
- init_mmio_iops_siimage(hwif);
-}
-
-/**
- * sil_cable_detect - cable detection
- * @hwif: interface to check
- *
- * Check for the presence of an ATA66 capable cable on the interface.
- */
-
-static u8 sil_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long addr = siimage_selreg(hwif, 0);
- u8 ata66 = sil_ioread8(dev, addr);
-
- return (ata66 & 0x01) ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops sil_pata_port_ops = {
- .set_pio_mode = sil_set_pio_mode,
- .set_dma_mode = sil_set_dma_mode,
- .quirkproc = sil_quirkproc,
- .udma_filter = sil_pata_udma_filter,
- .cable_detect = sil_cable_detect,
-};
-
-static const struct ide_port_ops sil_sata_port_ops = {
- .set_pio_mode = sil_set_pio_mode,
- .set_dma_mode = sil_set_dma_mode,
- .reset_poll = sil_sata_reset_poll,
- .pre_reset = sil_sata_pre_reset,
- .quirkproc = sil_quirkproc,
- .udma_filter = sil_sata_udma_filter,
- .cable_detect = sil_cable_detect,
-};
-
-static const struct ide_dma_ops sil_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = ide_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = siimage_dma_test_irq,
- .dma_timeout = ide_dma_timeout,
- .dma_lost_irq = ide_dma_lost_irq,
-};
-
-#define DECLARE_SII_DEV(p_ops) \
- { \
- .name = DRV_NAME, \
- .init_chipset = init_chipset_siimage, \
- .init_iops = init_iops_siimage, \
- .port_ops = p_ops, \
- .dma_ops = &sil_dma_ops, \
- .pio_mask = ATA_PIO4, \
- .mwdma_mask = ATA_MWDMA2, \
- .udma_mask = ATA_UDMA6, \
- }
-
-static const struct ide_port_info siimage_chipsets[] __devinitdata = {
- /* 0: SiI680 */ DECLARE_SII_DEV(&sil_pata_port_ops),
- /* 1: SiI3112 */ DECLARE_SII_DEV(&sil_sata_port_ops)
-};
-
-/**
- * siimage_init_one - PCI layer discovery entry
- * @dev: PCI device
- * @id: ident table entry
- *
- * Called by the PCI code when it finds an SiI680 or SiI3112 controller.
- * We then use the IDE PCI generic helper to do most of the work.
- */
-
-static int __devinit siimage_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- void __iomem *ioaddr = NULL;
- resource_size_t bar5 = pci_resource_start(dev, 5);
- unsigned long barsize = pci_resource_len(dev, 5);
- int rc;
- struct ide_port_info d;
- u8 idx = id->driver_data;
- u8 BA5_EN;
-
- d = siimage_chipsets[idx];
-
- if (idx) {
- static int first = 1;
-
- if (first) {
- printk(KERN_INFO DRV_NAME ": For full SATA support you "
- "should use the libata sata_sil module.\n");
- first = 0;
- }
-
- d.host_flags |= IDE_HFLAG_NO_ATAPI_DMA;
- }
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- pci_read_config_byte(dev, 0x8A, &BA5_EN);
- if ((BA5_EN & 0x01) || bar5) {
- /*
- * Drop back to PIO if we can't map the MMIO. Some systems
- * seem to get terminally confused in the PCI spaces.
- */
- if (!request_mem_region(bar5, barsize, d.name)) {
- printk(KERN_WARNING DRV_NAME " %s: MMIO ports not "
- "available\n", pci_name(dev));
- } else {
- ioaddr = ioremap(bar5, barsize);
- if (ioaddr == NULL)
- release_mem_region(bar5, barsize);
- }
- }
-
- rc = ide_pci_init_one(dev, &d, ioaddr);
- if (rc) {
- if (ioaddr) {
- iounmap(ioaddr);
- release_mem_region(bar5, barsize);
- }
- pci_disable_device(dev);
- }
-
- return rc;
-}
-
-static void __devexit siimage_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- void __iomem *ioaddr = host->host_priv;
-
- ide_pci_remove(dev);
-
- if (ioaddr) {
- resource_size_t bar5 = pci_resource_start(dev, 5);
- unsigned long barsize = pci_resource_len(dev, 5);
-
- iounmap(ioaddr);
- release_mem_region(bar5, barsize);
- }
-
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id siimage_pci_tbl[] = {
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_680), 0 },
-#ifdef CONFIG_BLK_DEV_IDE_SATA
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_3112), 1 },
- { PCI_VDEVICE(CMD, PCI_DEVICE_ID_SII_1210SA), 1 },
-#endif
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, siimage_pci_tbl);
-
-static struct pci_driver siimage_pci_driver = {
- .name = "SiI_IDE",
- .id_table = siimage_pci_tbl,
- .probe = siimage_init_one,
- .remove = __devexit_p(siimage_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init siimage_ide_init(void)
-{
- return ide_pci_register_driver(&siimage_pci_driver);
-}
-
-static void __exit siimage_ide_exit(void)
-{
- pci_unregister_driver(&siimage_pci_driver);
-}
-
-module_init(siimage_ide_init);
-module_exit(siimage_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick, Alan Cox");
-MODULE_DESCRIPTION("PCI driver module for SiI IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/sis5513.c b/drivers/ide/pci/sis5513.c
deleted file mode 100644
index ad32e18c5ba3..000000000000
--- a/drivers/ide/pci/sis5513.c
+++ /dev/null
@@ -1,641 +0,0 @@
-/*
- * Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2002 Lionel Bouton <Lionel.Bouton@inet6.fr>, Maintainer
- * Copyright (C) 2003 Vojtech Pavlik <vojtech@suse.cz>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- *
- * Thanks :
- *
- * SiS Taiwan : for direct support and hardware.
- * Daniela Engert : for initial ATA100 advices and numerous others.
- * John Fremlin, Manfred Spraul, Dave Morgan, Peter Kjellerstedt :
- * for checking code correctness, providing patches.
- *
- *
- * Original tests and design on the SiS620 chipset.
- * ATA100 tests and design on the SiS735 chipset.
- * ATA16/33 support from specs
- * ATA133 support for SiS961/962 by L.C. Chang <lcchang@sis.com.tw>
- * ATA133 961/962/963 fixes by Vojtech Pavlik <vojtech@suse.cz>
- *
- * Documentation:
- * SiS chipset documentation available under NDA to companies only
- * (not to individuals).
- */
-
-/*
- * The original SiS5513 comes from a SiS5511/55112/5513 chipset. The original
- * SiS5513 was also used in the SiS5596/5513 chipset. Thus if we see a SiS5511
- * or SiS5596, we can assume we see the first MWDMA-16 capable SiS5513 chip.
- *
- * Later SiS chipsets integrated the 5513 functionality into the NorthBridge,
- * starting with SiS5571 and up to SiS745. The PCI ID didn't change, though. We
- * can figure out that we have a more modern and more capable 5513 by looking
- * for the respective NorthBridge IDs.
- *
- * Even later (96x family) SiS chipsets use the MuTIOL link and place the 5513
- * into the SouthBrige. Here we cannot rely on looking up the NorthBridge PCI
- * ID, while the now ATA-133 capable 5513 still has the same PCI ID.
- * Fortunately the 5513 can be 'unmasked' by fiddling with some config space
- * bits, changing its device id to the true one - 5517 for 961 and 5518 for
- * 962/963.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "sis5513"
-
-/* registers layout and init values are chipset family dependant */
-
-#define ATA_16 0x01
-#define ATA_33 0x02
-#define ATA_66 0x03
-#define ATA_100a 0x04 /* SiS730/SiS550 is ATA100 with ATA66 layout */
-#define ATA_100 0x05
-#define ATA_133a 0x06 /* SiS961b with 133 support */
-#define ATA_133 0x07 /* SiS962/963 */
-
-static u8 chipset_family;
-
-/*
- * Devices supported
- */
-static const struct {
- const char *name;
- u16 host_id;
- u8 chipset_family;
- u8 flags;
-} SiSHostChipInfo[] = {
- { "SiS968", PCI_DEVICE_ID_SI_968, ATA_133 },
- { "SiS966", PCI_DEVICE_ID_SI_966, ATA_133 },
- { "SiS965", PCI_DEVICE_ID_SI_965, ATA_133 },
- { "SiS745", PCI_DEVICE_ID_SI_745, ATA_100 },
- { "SiS735", PCI_DEVICE_ID_SI_735, ATA_100 },
- { "SiS733", PCI_DEVICE_ID_SI_733, ATA_100 },
- { "SiS635", PCI_DEVICE_ID_SI_635, ATA_100 },
- { "SiS633", PCI_DEVICE_ID_SI_633, ATA_100 },
-
- { "SiS730", PCI_DEVICE_ID_SI_730, ATA_100a },
- { "SiS550", PCI_DEVICE_ID_SI_550, ATA_100a },
-
- { "SiS640", PCI_DEVICE_ID_SI_640, ATA_66 },
- { "SiS630", PCI_DEVICE_ID_SI_630, ATA_66 },
- { "SiS620", PCI_DEVICE_ID_SI_620, ATA_66 },
- { "SiS540", PCI_DEVICE_ID_SI_540, ATA_66 },
- { "SiS530", PCI_DEVICE_ID_SI_530, ATA_66 },
-
- { "SiS5600", PCI_DEVICE_ID_SI_5600, ATA_33 },
- { "SiS5598", PCI_DEVICE_ID_SI_5598, ATA_33 },
- { "SiS5597", PCI_DEVICE_ID_SI_5597, ATA_33 },
- { "SiS5591/2", PCI_DEVICE_ID_SI_5591, ATA_33 },
- { "SiS5582", PCI_DEVICE_ID_SI_5582, ATA_33 },
- { "SiS5581", PCI_DEVICE_ID_SI_5581, ATA_33 },
-
- { "SiS5596", PCI_DEVICE_ID_SI_5596, ATA_16 },
- { "SiS5571", PCI_DEVICE_ID_SI_5571, ATA_16 },
- { "SiS5517", PCI_DEVICE_ID_SI_5517, ATA_16 },
- { "SiS551x", PCI_DEVICE_ID_SI_5511, ATA_16 },
-};
-
-/* Cycle time bits and values vary across chip dma capabilities
- These three arrays hold the register layout and the values to set.
- Indexed by chipset_family and (dma_mode - XFER_UDMA_0) */
-
-/* {0, ATA_16, ATA_33, ATA_66, ATA_100a, ATA_100, ATA_133} */
-static u8 cycle_time_offset[] = { 0, 0, 5, 4, 4, 0, 0 };
-static u8 cycle_time_range[] = { 0, 0, 2, 3, 3, 4, 4 };
-static u8 cycle_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 3, 2, 1, 0, 0, 0, 0 }, /* ATA_33 */
- { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_66 */
- { 7, 5, 3, 2, 1, 0, 0 }, /* ATA_100a (730 specific),
- different cycle_time range and offset */
- { 11, 7, 5, 4, 2, 1, 0 }, /* ATA_100 */
- { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133a (earliest 691 southbridges) */
- { 15, 10, 7, 5, 3, 2, 1 }, /* ATA_133 */
-};
-/* CRC Valid Setup Time vary across IDE clock setting 33/66/100/133
- See SiS962 data sheet for more detail */
-static u8 cvs_time_value[][XFER_UDMA_6 - XFER_UDMA_0 + 1] = {
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 0, 0, 0, 0, 0, 0, 0 }, /* no UDMA */
- { 2, 1, 1, 0, 0, 0, 0 },
- { 4, 3, 2, 1, 0, 0, 0 },
- { 4, 3, 2, 1, 0, 0, 0 },
- { 6, 4, 3, 1, 1, 1, 0 },
- { 9, 6, 4, 2, 2, 2, 2 },
- { 9, 6, 4, 2, 2, 2, 2 },
-};
-/* Initialize time, Active time, Recovery time vary across
- IDE clock settings. These 3 arrays hold the register value
- for PIO0/1/2/3/4 and DMA0/1/2 mode in order */
-static u8 ini_time_value[][8] = {
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 2, 1, 0, 0, 0, 1, 0, 0 },
- { 4, 3, 1, 1, 1, 3, 1, 1 },
- { 4, 3, 1, 1, 1, 3, 1, 1 },
- { 6, 4, 2, 2, 2, 4, 2, 2 },
- { 9, 6, 3, 3, 3, 6, 3, 3 },
- { 9, 6, 3, 3, 3, 6, 3, 3 },
-};
-static u8 act_time_value[][8] = {
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 9, 9, 9, 2, 2, 7, 2, 2 },
- { 19, 19, 19, 5, 4, 14, 5, 4 },
- { 19, 19, 19, 5, 4, 14, 5, 4 },
- { 28, 28, 28, 7, 6, 21, 7, 6 },
- { 38, 38, 38, 10, 9, 28, 10, 9 },
- { 38, 38, 38, 10, 9, 28, 10, 9 },
-};
-static u8 rco_time_value[][8] = {
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 0, 0, 0, 0, 0, 0, 0, 0 },
- { 9, 2, 0, 2, 0, 7, 1, 1 },
- { 19, 5, 1, 5, 2, 16, 3, 2 },
- { 19, 5, 1, 5, 2, 16, 3, 2 },
- { 30, 9, 3, 9, 4, 25, 6, 4 },
- { 40, 12, 4, 12, 5, 34, 12, 5 },
- { 40, 12, 4, 12, 5, 34, 12, 5 },
-};
-
-/*
- * Printing configuration
- */
-/* Used for chipset type printing at boot time */
-static char *chipset_capability[] = {
- "ATA", "ATA 16",
- "ATA 33", "ATA 66",
- "ATA 100 (1st gen)", "ATA 100 (2nd gen)",
- "ATA 133 (1st gen)", "ATA 133 (2nd gen)"
-};
-
-/*
- * Configuration functions
- */
-
-static u8 sis_ata133_get_base(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 reg54 = 0;
-
- pci_read_config_dword(dev, 0x54, &reg54);
-
- return ((reg54 & 0x40000000) ? 0x70 : 0x40) + drive->dn * 4;
-}
-
-static void sis_ata16_program_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u16 t1 = 0;
- u8 drive_pci = 0x40 + drive->dn * 2;
-
- const u16 pio_timings[] = { 0x000, 0x607, 0x404, 0x303, 0x301 };
- const u16 mwdma_timings[] = { 0x008, 0x302, 0x301 };
-
- pci_read_config_word(dev, drive_pci, &t1);
-
- /* clear active/recovery timings */
- t1 &= ~0x070f;
- if (mode >= XFER_MW_DMA_0) {
- if (chipset_family > ATA_16)
- t1 &= ~0x8000; /* disable UDMA */
- t1 |= mwdma_timings[mode - XFER_MW_DMA_0];
- } else
- t1 |= pio_timings[mode - XFER_PIO_0];
-
- pci_write_config_word(dev, drive_pci, t1);
-}
-
-static void sis_ata100_program_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 t1, drive_pci = 0x40 + drive->dn * 2;
-
- /* timing bits: 7:4 active 3:0 recovery */
- const u8 pio_timings[] = { 0x00, 0x67, 0x44, 0x33, 0x31 };
- const u8 mwdma_timings[] = { 0x08, 0x32, 0x31 };
-
- if (mode >= XFER_MW_DMA_0) {
- u8 t2 = 0;
-
- pci_read_config_byte(dev, drive_pci, &t2);
- t2 &= ~0x80; /* disable UDMA */
- pci_write_config_byte(dev, drive_pci, t2);
-
- t1 = mwdma_timings[mode - XFER_MW_DMA_0];
- } else
- t1 = pio_timings[mode - XFER_PIO_0];
-
- pci_write_config_byte(dev, drive_pci + 1, t1);
-}
-
-static void sis_ata133_program_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 t1 = 0;
- u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
-
- pci_read_config_dword(dev, drive_pci, &t1);
-
- t1 &= 0xc0c00fff;
- clk = (t1 & 0x08) ? ATA_133 : ATA_100;
- if (mode >= XFER_MW_DMA_0) {
- t1 &= ~0x04; /* disable UDMA */
- idx = mode - XFER_MW_DMA_0 + 5;
- } else
- idx = mode - XFER_PIO_0;
- t1 |= ini_time_value[clk][idx] << 12;
- t1 |= act_time_value[clk][idx] << 16;
- t1 |= rco_time_value[clk][idx] << 24;
-
- pci_write_config_dword(dev, drive_pci, t1);
-}
-
-static void sis_program_timings(ide_drive_t *drive, const u8 mode)
-{
- if (chipset_family < ATA_100) /* ATA_16/33/66/100a */
- sis_ata16_program_timings(drive, mode);
- else if (chipset_family < ATA_133) /* ATA_100/133a */
- sis_ata100_program_timings(drive, mode);
- else /* ATA_133 */
- sis_ata133_program_timings(drive, mode);
-}
-
-static void config_drive_art_rwp(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg4bh = 0;
- u8 rw_prefetch = 0;
-
- pci_read_config_byte(dev, 0x4b, &reg4bh);
-
- if (drive->media == ide_disk)
- rw_prefetch = 0x11 << drive->dn;
-
- if ((reg4bh & (0x11 << drive->dn)) != rw_prefetch)
- pci_write_config_byte(dev, 0x4b, reg4bh|rw_prefetch);
-}
-
-static void sis_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- config_drive_art_rwp(drive);
- sis_program_timings(drive, XFER_PIO_0 + pio);
-}
-
-static void sis_ata133_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 regdw = 0;
- u8 drive_pci = sis_ata133_get_base(drive), clk, idx;
-
- pci_read_config_dword(dev, drive_pci, &regdw);
-
- regdw |= 0x04;
- regdw &= 0xfffff00f;
- /* check if ATA133 enable */
- clk = (regdw & 0x08) ? ATA_133 : ATA_100;
- idx = mode - XFER_UDMA_0;
- regdw |= cycle_time_value[clk][idx] << 4;
- regdw |= cvs_time_value[clk][idx] << 8;
-
- pci_write_config_dword(dev, drive_pci, regdw);
-}
-
-static void sis_ata33_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u8 drive_pci = 0x40 + drive->dn * 2, reg = 0, i = chipset_family;
-
- pci_read_config_byte(dev, drive_pci + 1, &reg);
-
- /* force the UDMA bit on if we want to use UDMA */
- reg |= 0x80;
- /* clean reg cycle time bits */
- reg &= ~((0xff >> (8 - cycle_time_range[i])) << cycle_time_offset[i]);
- /* set reg cycle time bits */
- reg |= cycle_time_value[i][mode - XFER_UDMA_0] << cycle_time_offset[i];
-
- pci_write_config_byte(dev, drive_pci + 1, reg);
-}
-
-static void sis_program_udma_timings(ide_drive_t *drive, const u8 mode)
-{
- if (chipset_family >= ATA_133) /* ATA_133 */
- sis_ata133_program_udma_timings(drive, mode);
- else /* ATA_33/66/100a/100/133a */
- sis_ata33_program_udma_timings(drive, mode);
-}
-
-static void sis_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- if (speed >= XFER_UDMA_0)
- sis_program_udma_timings(drive, speed);
- else
- sis_program_timings(drive, speed);
-}
-
-static u8 sis_ata133_udma_filter(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 regdw = 0;
- u8 drive_pci = sis_ata133_get_base(drive);
-
- pci_read_config_dword(dev, drive_pci, &regdw);
-
- /* if ATA133 disable, we should not set speed above UDMA5 */
- return (regdw & 0x08) ? ATA_UDMA6 : ATA_UDMA5;
-}
-
-static int __devinit sis_find_family(struct pci_dev *dev)
-{
- struct pci_dev *host;
- int i = 0;
-
- chipset_family = 0;
-
- for (i = 0; i < ARRAY_SIZE(SiSHostChipInfo) && !chipset_family; i++) {
-
- host = pci_get_device(PCI_VENDOR_ID_SI, SiSHostChipInfo[i].host_id, NULL);
-
- if (!host)
- continue;
-
- chipset_family = SiSHostChipInfo[i].chipset_family;
-
- /* Special case for SiS630 : 630S/ET is ATA_100a */
- if (SiSHostChipInfo[i].host_id == PCI_DEVICE_ID_SI_630) {
- if (host->revision >= 0x30)
- chipset_family = ATA_100a;
- }
- pci_dev_put(host);
-
- printk(KERN_INFO DRV_NAME " %s: %s %s controller\n",
- pci_name(dev), SiSHostChipInfo[i].name,
- chipset_capability[chipset_family]);
- }
-
- if (!chipset_family) { /* Belongs to pci-quirks */
-
- u32 idemisc;
- u16 trueid;
-
- /* Disable ID masking and register remapping */
- pci_read_config_dword(dev, 0x54, &idemisc);
- pci_write_config_dword(dev, 0x54, (idemisc & 0x7fffffff));
- pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
- pci_write_config_dword(dev, 0x54, idemisc);
-
- if (trueid == 0x5518) {
- printk(KERN_INFO DRV_NAME " %s: SiS 962/963 MuTIOL IDE UDMA133 controller\n",
- pci_name(dev));
- chipset_family = ATA_133;
-
- /* Check for 5513 compability mapping
- * We must use this, else the port enabled code will fail,
- * as it expects the enablebits at 0x4a.
- */
- if ((idemisc & 0x40000000) == 0) {
- pci_write_config_dword(dev, 0x54, idemisc | 0x40000000);
- printk(KERN_INFO DRV_NAME " %s: Switching to 5513 register mapping\n",
- pci_name(dev));
- }
- }
- }
-
- if (!chipset_family) { /* Belongs to pci-quirks */
-
- struct pci_dev *lpc_bridge;
- u16 trueid;
- u8 prefctl;
- u8 idecfg;
-
- pci_read_config_byte(dev, 0x4a, &idecfg);
- pci_write_config_byte(dev, 0x4a, idecfg | 0x10);
- pci_read_config_word(dev, PCI_DEVICE_ID, &trueid);
- pci_write_config_byte(dev, 0x4a, idecfg);
-
- if (trueid == 0x5517) { /* SiS 961/961B */
-
- lpc_bridge = pci_get_slot(dev->bus, 0x10); /* Bus 0, Dev 2, Fn 0 */
- pci_read_config_byte(dev, 0x49, &prefctl);
- pci_dev_put(lpc_bridge);
-
- if (lpc_bridge->revision == 0x10 && (prefctl & 0x80)) {
- printk(KERN_INFO DRV_NAME " %s: SiS 961B MuTIOL IDE UDMA133 controller\n",
- pci_name(dev));
- chipset_family = ATA_133a;
- } else {
- printk(KERN_INFO DRV_NAME " %s: SiS 961 MuTIOL IDE UDMA100 controller\n",
- pci_name(dev));
- chipset_family = ATA_100;
- }
- }
- }
-
- return chipset_family;
-}
-
-static unsigned int init_chipset_sis5513(struct pci_dev *dev)
-{
- /* Make general config ops here
- 1/ tell IDE channels to operate in Compatibility mode only
- 2/ tell old chips to allow per drive IDE timings */
-
- u8 reg;
- u16 regw;
-
- switch (chipset_family) {
- case ATA_133:
- /* SiS962 operation mode */
- pci_read_config_word(dev, 0x50, &regw);
- if (regw & 0x08)
- pci_write_config_word(dev, 0x50, regw&0xfff7);
- pci_read_config_word(dev, 0x52, &regw);
- if (regw & 0x08)
- pci_write_config_word(dev, 0x52, regw&0xfff7);
- break;
- case ATA_133a:
- case ATA_100:
- /* Fixup latency */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x80);
- /* Set compatibility bit */
- pci_read_config_byte(dev, 0x49, &reg);
- if (!(reg & 0x01))
- pci_write_config_byte(dev, 0x49, reg|0x01);
- break;
- case ATA_100a:
- case ATA_66:
- /* Fixup latency */
- pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x10);
-
- /* On ATA_66 chips the bit was elsewhere */
- pci_read_config_byte(dev, 0x52, &reg);
- if (!(reg & 0x04))
- pci_write_config_byte(dev, 0x52, reg|0x04);
- break;
- case ATA_33:
- /* On ATA_33 we didn't have a single bit to set */
- pci_read_config_byte(dev, 0x09, &reg);
- if ((reg & 0x0f) != 0x00)
- pci_write_config_byte(dev, 0x09, reg&0xf0);
- case ATA_16:
- /* force per drive recovery and active timings
- needed on ATA_33 and below chips */
- pci_read_config_byte(dev, 0x52, &reg);
- if (!(reg & 0x08))
- pci_write_config_byte(dev, 0x52, reg|0x08);
- break;
- }
-
- return 0;
-}
-
-struct sis_laptop {
- u16 device;
- u16 subvendor;
- u16 subdevice;
-};
-
-static const struct sis_laptop sis_laptop[] = {
- /* devid, subvendor, subdev */
- { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */
- { 0x5513, 0x1734, 0x105f }, /* FSC Amilo A1630 */
- { 0x5513, 0x1071, 0x8640 }, /* EasyNote K5305 */
- /* end marker */
- { 0, }
-};
-
-static u8 sis_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- const struct sis_laptop *lap = &sis_laptop[0];
- u8 ata66 = 0;
-
- while (lap->device) {
- if (lap->device == pdev->device &&
- lap->subvendor == pdev->subsystem_vendor &&
- lap->subdevice == pdev->subsystem_device)
- return ATA_CBL_PATA40_SHORT;
- lap++;
- }
-
- if (chipset_family >= ATA_133) {
- u16 regw = 0;
- u16 reg_addr = hwif->channel ? 0x52: 0x50;
- pci_read_config_word(pdev, reg_addr, &regw);
- ata66 = (regw & 0x8000) ? 0 : 1;
- } else if (chipset_family >= ATA_66) {
- u8 reg48h = 0;
- u8 mask = hwif->channel ? 0x20 : 0x10;
- pci_read_config_byte(pdev, 0x48, &reg48h);
- ata66 = (reg48h & mask) ? 0 : 1;
- }
-
- return ata66 ? ATA_CBL_PATA80 : ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops sis_port_ops = {
- .set_pio_mode = sis_set_pio_mode,
- .set_dma_mode = sis_set_dma_mode,
- .cable_detect = sis_cable_detect,
-};
-
-static const struct ide_port_ops sis_ata133_port_ops = {
- .set_pio_mode = sis_set_pio_mode,
- .set_dma_mode = sis_set_dma_mode,
- .udma_filter = sis_ata133_udma_filter,
- .cable_detect = sis_cable_detect,
-};
-
-static const struct ide_port_info sis5513_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_sis5513,
- .enablebits = { {0x4a, 0x02, 0x02}, {0x4a, 0x04, 0x04} },
- .host_flags = IDE_HFLAG_LEGACY_IRQS | IDE_HFLAG_NO_AUTODMA,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int __devinit sis5513_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = sis5513_chipset;
- u8 udma_rates[] = { 0x00, 0x00, 0x07, 0x1f, 0x3f, 0x3f, 0x7f, 0x7f };
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- return rc;
-
- if (sis_find_family(dev) == 0)
- return -ENOTSUPP;
-
- if (chipset_family >= ATA_133)
- d.port_ops = &sis_ata133_port_ops;
- else
- d.port_ops = &sis_port_ops;
-
- d.udma_mask = udma_rates[chipset_family];
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static void __devexit sis5513_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id sis5513_pci_tbl[] = {
- { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5513), 0 },
- { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_5518), 0 },
- { PCI_VDEVICE(SI, PCI_DEVICE_ID_SI_1180), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, sis5513_pci_tbl);
-
-static struct pci_driver sis5513_pci_driver = {
- .name = "SIS_IDE",
- .id_table = sis5513_pci_tbl,
- .probe = sis5513_init_one,
- .remove = __devexit_p(sis5513_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init sis5513_ide_init(void)
-{
- return ide_pci_register_driver(&sis5513_pci_driver);
-}
-
-static void __exit sis5513_ide_exit(void)
-{
- pci_unregister_driver(&sis5513_pci_driver);
-}
-
-module_init(sis5513_ide_init);
-module_exit(sis5513_ide_exit);
-
-MODULE_AUTHOR("Lionel Bouton, L C Chang, Andre Hedrick, Vojtech Pavlik");
-MODULE_DESCRIPTION("PCI driver module for SIS IDE");
-MODULE_LICENSE("GPL");
-
-/*
- * TODO:
- * - CLEANUP
- * - More checks in the config registers (force values instead of
- * relying on the BIOS setting them correctly).
- * - Further optimisations ?
- * . for example ATA66+ regs 0x48 & 0x4A
- */
diff --git a/drivers/ide/pci/sl82c105.c b/drivers/ide/pci/sl82c105.c
deleted file mode 100644
index 84dc33602ff8..000000000000
--- a/drivers/ide/pci/sl82c105.c
+++ /dev/null
@@ -1,371 +0,0 @@
-/*
- * SL82C105/Winbond 553 IDE driver
- *
- * Maintainer unknown.
- *
- * Drive tuning added from Rebel.com's kernel sources
- * -- Russell King (15/11/98) linux@arm.linux.org.uk
- *
- * Merge in Russell's HW workarounds, fix various problems
- * with the timing registers setup.
- * -- Benjamin Herrenschmidt (01/11/03) benh@kernel.crashing.org
- *
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
- * Copyright (C) 2007 Bartlomiej Zolnierkiewicz
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "sl82c105"
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(arg) printk arg
-#else
-#define DBG(fmt,...)
-#endif
-/*
- * SL82C105 PCI config register 0x40 bits.
- */
-#define CTRL_IDE_IRQB (1 << 30)
-#define CTRL_IDE_IRQA (1 << 28)
-#define CTRL_LEGIRQ (1 << 11)
-#define CTRL_P1F16 (1 << 5)
-#define CTRL_P1EN (1 << 4)
-#define CTRL_P0F16 (1 << 1)
-#define CTRL_P0EN (1 << 0)
-
-/*
- * Convert a PIO mode and cycle time to the required on/off times
- * for the interface. This has protection against runaway timings.
- */
-static unsigned int get_pio_timings(ide_drive_t *drive, u8 pio)
-{
- struct ide_timing *t = ide_timing_find_mode(XFER_PIO_0 + pio);
- unsigned int cmd_on, cmd_off;
- u8 iordy = 0;
-
- cmd_on = (t->active + 29) / 30;
- cmd_off = (ide_pio_cycle_time(drive, pio) - 30 * cmd_on + 29) / 30;
-
- if (cmd_on == 0)
- cmd_on = 1;
-
- if (cmd_off == 0)
- cmd_off = 1;
-
- if (pio > 2 || ata_id_has_iordy(drive->id))
- iordy = 0x40;
-
- return (cmd_on - 1) << 8 | (cmd_off - 1) | iordy;
-}
-
-/*
- * Configure the chipset for PIO mode.
- */
-static void sl82c105_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- int reg = 0x44 + drive->dn * 4;
- u16 drv_ctrl;
-
- drv_ctrl = get_pio_timings(drive, pio);
-
- /*
- * Store the PIO timings so that we can restore them
- * in case DMA will be turned off...
- */
- drive->drive_data &= 0xffff0000;
- drive->drive_data |= drv_ctrl;
-
- pci_write_config_word(dev, reg, drv_ctrl);
- pci_read_config_word (dev, reg, &drv_ctrl);
-
- printk(KERN_DEBUG "%s: selected %s (%dns) (%04X)\n", drive->name,
- ide_xfer_verbose(pio + XFER_PIO_0),
- ide_pio_cycle_time(drive, pio), drv_ctrl);
-}
-
-/*
- * Configure the chipset for DMA mode.
- */
-static void sl82c105_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- static u16 mwdma_timings[] = {0x0707, 0x0201, 0x0200};
- u16 drv_ctrl;
-
- DBG(("sl82c105_tune_chipset(drive:%s, speed:%s)\n",
- drive->name, ide_xfer_verbose(speed)));
-
- drv_ctrl = mwdma_timings[speed - XFER_MW_DMA_0];
-
- /*
- * Store the DMA timings so that we can actually program
- * them when DMA will be turned on...
- */
- drive->drive_data &= 0x0000ffff;
- drive->drive_data |= (unsigned long)drv_ctrl << 16;
-}
-
-/*
- * The SL82C105 holds off all IDE interrupts while in DMA mode until
- * all DMA activity is completed. Sometimes this causes problems (eg,
- * when the drive wants to report an error condition).
- *
- * 0x7e is a "chip testing" register. Bit 2 resets the DMA controller
- * state machine. We need to kick this to work around various bugs.
- */
-static inline void sl82c105_reset_host(struct pci_dev *dev)
-{
- u16 val;
-
- pci_read_config_word(dev, 0x7e, &val);
- pci_write_config_word(dev, 0x7e, val | (1 << 2));
- pci_write_config_word(dev, 0x7e, val & ~(1 << 2));
-}
-
-/*
- * If we get an IRQ timeout, it might be that the DMA state machine
- * got confused. Fix from Todd Inglett. Details from Winbond.
- *
- * This function is called when the IDE timer expires, the drive
- * indicates that it is READY, and we were waiting for DMA to complete.
- */
-static void sl82c105_dma_lost_irq(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u32 val, mask = hwif->channel ? CTRL_IDE_IRQB : CTRL_IDE_IRQA;
- u8 dma_cmd;
-
- printk("sl82c105: lost IRQ, resetting host\n");
-
- /*
- * Check the raw interrupt from the drive.
- */
- pci_read_config_dword(dev, 0x40, &val);
- if (val & mask)
- printk("sl82c105: drive was requesting IRQ, but host lost it\n");
-
- /*
- * Was DMA enabled? If so, disable it - we're resetting the
- * host. The IDE layer will be handling the drive for us.
- */
- dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
- if (dma_cmd & 1) {
- outb(dma_cmd & ~1, hwif->dma_base + ATA_DMA_CMD);
- printk("sl82c105: DMA was enabled\n");
- }
-
- sl82c105_reset_host(dev);
-}
-
-/*
- * ATAPI devices can cause the SL82C105 DMA state machine to go gaga.
- * Winbond recommend that the DMA state machine is reset prior to
- * setting the bus master DMA enable bit.
- *
- * The generic IDE core will have disabled the BMEN bit before this
- * function is called.
- */
-static void sl82c105_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int reg = 0x44 + drive->dn * 4;
-
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
- pci_write_config_word(dev, reg, drive->drive_data >> 16);
-
- sl82c105_reset_host(dev);
- ide_dma_start(drive);
-}
-
-static void sl82c105_dma_timeout(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
-
- DBG(("sl82c105_dma_timeout(drive:%s)\n", drive->name));
-
- sl82c105_reset_host(dev);
- ide_dma_timeout(drive);
-}
-
-static int sl82c105_dma_end(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- int reg = 0x44 + drive->dn * 4;
- int ret;
-
- DBG(("%s(drive:%s)\n", __func__, drive->name));
-
- ret = ide_dma_end(drive);
-
- pci_write_config_word(dev, reg, drive->drive_data);
-
- return ret;
-}
-
-/*
- * ATA reset will clear the 16 bits mode in the control
- * register, we need to reprogram it
- */
-static void sl82c105_resetproc(ide_drive_t *drive)
-{
- struct pci_dev *dev = to_pci_dev(drive->hwif->dev);
- u32 val;
-
- DBG(("sl82c105_resetproc(drive:%s)\n", drive->name));
-
- pci_read_config_dword(dev, 0x40, &val);
- val |= (CTRL_P1F16 | CTRL_P0F16);
- pci_write_config_dword(dev, 0x40, val);
-}
-
-/*
- * Return the revision of the Winbond bridge
- * which this function is part of.
- */
-static u8 sl82c105_bridge_revision(struct pci_dev *dev)
-{
- struct pci_dev *bridge;
-
- /*
- * The bridge should be part of the same device, but function 0.
- */
- bridge = pci_get_bus_and_slot(dev->bus->number,
- PCI_DEVFN(PCI_SLOT(dev->devfn), 0));
- if (!bridge)
- return -1;
-
- /*
- * Make sure it is a Winbond 553 and is an ISA bridge.
- */
- if (bridge->vendor != PCI_VENDOR_ID_WINBOND ||
- bridge->device != PCI_DEVICE_ID_WINBOND_83C553 ||
- bridge->class >> 8 != PCI_CLASS_BRIDGE_ISA) {
- pci_dev_put(bridge);
- return -1;
- }
- /*
- * We need to find function 0's revision, not function 1
- */
- pci_dev_put(bridge);
-
- return bridge->revision;
-}
-
-/*
- * Enable the PCI device
- *
- * --BenH: It's arch fixup code that should enable channels that
- * have not been enabled by firmware. I decided we can still enable
- * channel 0 here at least, but channel 1 has to be enabled by
- * firmware or arch code. We still set both to 16 bits mode.
- */
-static unsigned int init_chipset_sl82c105(struct pci_dev *dev)
-{
- u32 val;
-
- DBG(("init_chipset_sl82c105()\n"));
-
- pci_read_config_dword(dev, 0x40, &val);
- val |= CTRL_P0EN | CTRL_P0F16 | CTRL_P1F16;
- pci_write_config_dword(dev, 0x40, val);
-
- return dev->irq;
-}
-
-static const struct ide_port_ops sl82c105_port_ops = {
- .set_pio_mode = sl82c105_set_pio_mode,
- .set_dma_mode = sl82c105_set_dma_mode,
- .resetproc = sl82c105_resetproc,
-};
-
-static const struct ide_dma_ops sl82c105_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = sl82c105_dma_start,
- .dma_end = sl82c105_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = sl82c105_dma_lost_irq,
- .dma_timeout = sl82c105_dma_timeout,
-};
-
-static const struct ide_port_info sl82c105_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_sl82c105,
- .enablebits = {{0x40,0x01,0x01}, {0x40,0x10,0x10}},
- .port_ops = &sl82c105_port_ops,
- .dma_ops = &sl82c105_dma_ops,
- .host_flags = IDE_HFLAG_IO_32BIT |
- IDE_HFLAG_UNMASK_IRQS |
-/* FIXME: check for Compatibility mode in generic IDE PCI code */
-#if defined(CONFIG_LOPEC) || defined(CONFIG_SANDPOINT)
- IDE_HFLAG_FORCE_LEGACY_IRQS |
-#endif
- IDE_HFLAG_SERIALIZE_DMA |
- IDE_HFLAG_NO_AUTODMA,
- .pio_mask = ATA_PIO5,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int __devinit sl82c105_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct ide_port_info d = sl82c105_chipset;
- u8 rev = sl82c105_bridge_revision(dev);
-
- if (rev <= 5) {
- /*
- * Never ever EVER under any circumstances enable
- * DMA when the bridge is this old.
- */
- printk(KERN_INFO DRV_NAME ": Winbond W83C553 bridge "
- "revision %d, BM-DMA disabled\n", rev);
- d.dma_ops = NULL;
- d.mwdma_mask = 0;
- d.host_flags &= ~IDE_HFLAG_SERIALIZE_DMA;
- }
-
- return ide_pci_init_one(dev, &d, NULL);
-}
-
-static const struct pci_device_id sl82c105_pci_tbl[] = {
- { PCI_VDEVICE(WINBOND, PCI_DEVICE_ID_WINBOND_82C105), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, sl82c105_pci_tbl);
-
-static struct pci_driver sl82c105_pci_driver = {
- .name = "W82C105_IDE",
- .id_table = sl82c105_pci_tbl,
- .probe = sl82c105_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init sl82c105_ide_init(void)
-{
- return ide_pci_register_driver(&sl82c105_pci_driver);
-}
-
-static void __exit sl82c105_ide_exit(void)
-{
- pci_unregister_driver(&sl82c105_pci_driver);
-}
-
-module_init(sl82c105_ide_init);
-module_exit(sl82c105_ide_exit);
-
-MODULE_DESCRIPTION("PCI driver module for W82C105 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/slc90e66.c b/drivers/ide/pci/slc90e66.c
deleted file mode 100644
index 0f759e4ed779..000000000000
--- a/drivers/ide/pci/slc90e66.c
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- * Copyright (C) 2000-2002 Andre Hedrick <andre@linux-ide.org>
- * Copyright (C) 2006-2007 MontaVista Software, Inc. <source@mvista.com>
- *
- * This is a look-alike variation of the ICH0 PIIX4 Ultra-66,
- * but this keeps the ISA-Bridge and slots alive.
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "slc90e66"
-
-static DEFINE_SPINLOCK(slc90e66_lock);
-
-static void slc90e66_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- int is_slave = drive->dn & 1;
- int master_port = hwif->channel ? 0x42 : 0x40;
- int slave_port = 0x44;
- unsigned long flags;
- u16 master_data;
- u8 slave_data;
- int control = 0;
- /* ISP RTC */
- static const u8 timings[][2] = {
- { 0, 0 },
- { 0, 0 },
- { 1, 0 },
- { 2, 1 },
- { 2, 3 }, };
-
- spin_lock_irqsave(&slc90e66_lock, flags);
- pci_read_config_word(dev, master_port, &master_data);
-
- if (pio > 1)
- control |= 1; /* Programmable timing on */
- if (drive->media == ide_disk)
- control |= 4; /* Prefetch, post write */
- if (pio > 2)
- control |= 2; /* IORDY */
- if (is_slave) {
- master_data |= 0x4000;
- master_data &= ~0x0070;
- if (pio > 1) {
- /* Set PPE, IE and TIME */
- master_data |= control << 4;
- }
- pci_read_config_byte(dev, slave_port, &slave_data);
- slave_data &= hwif->channel ? 0x0f : 0xf0;
- slave_data |= ((timings[pio][0] << 2) | timings[pio][1]) <<
- (hwif->channel ? 4 : 0);
- } else {
- master_data &= ~0x3307;
- if (pio > 1) {
- /* enable PPE, IE and TIME */
- master_data |= control;
- }
- master_data |= (timings[pio][0] << 12) | (timings[pio][1] << 8);
- }
- pci_write_config_word(dev, master_port, master_data);
- if (is_slave)
- pci_write_config_byte(dev, slave_port, slave_data);
- spin_unlock_irqrestore(&slc90e66_lock, flags);
-}
-
-static void slc90e66_set_dma_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 maslave = hwif->channel ? 0x42 : 0x40;
- int sitre = 0, a_speed = 7 << (drive->dn * 4);
- int u_speed = 0, u_flag = 1 << drive->dn;
- u16 reg4042, reg44, reg48, reg4a;
-
- pci_read_config_word(dev, maslave, &reg4042);
- sitre = (reg4042 & 0x4000) ? 1 : 0;
- pci_read_config_word(dev, 0x44, &reg44);
- pci_read_config_word(dev, 0x48, &reg48);
- pci_read_config_word(dev, 0x4a, &reg4a);
-
- if (speed >= XFER_UDMA_0) {
- u_speed = (speed - XFER_UDMA_0) << (drive->dn * 4);
-
- if (!(reg48 & u_flag))
- pci_write_config_word(dev, 0x48, reg48|u_flag);
- /* FIXME: (reg4a & a_speed) ? */
- if ((reg4a & u_speed) != u_speed) {
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
- pci_read_config_word(dev, 0x4a, &reg4a);
- pci_write_config_word(dev, 0x4a, reg4a|u_speed);
- }
- } else {
- const u8 mwdma_to_pio[] = { 0, 3, 4 };
- u8 pio;
-
- if (reg48 & u_flag)
- pci_write_config_word(dev, 0x48, reg48 & ~u_flag);
- if (reg4a & a_speed)
- pci_write_config_word(dev, 0x4a, reg4a & ~a_speed);
-
- if (speed >= XFER_MW_DMA_0)
- pio = mwdma_to_pio[speed - XFER_MW_DMA_0];
- else
- pio = 2; /* only SWDMA2 is allowed */
-
- slc90e66_set_pio_mode(drive, pio);
- }
-}
-
-static u8 slc90e66_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u8 reg47 = 0, mask = hwif->channel ? 0x01 : 0x02;
-
- pci_read_config_byte(dev, 0x47, &reg47);
-
- /* bit[0(1)]: 0:80, 1:40 */
- return (reg47 & mask) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static const struct ide_port_ops slc90e66_port_ops = {
- .set_pio_mode = slc90e66_set_pio_mode,
- .set_dma_mode = slc90e66_set_dma_mode,
- .cable_detect = slc90e66_cable_detect,
-};
-
-static const struct ide_port_info slc90e66_chipset __devinitdata = {
- .name = DRV_NAME,
- .enablebits = { {0x41, 0x80, 0x80}, {0x43, 0x80, 0x80} },
- .port_ops = &slc90e66_port_ops,
- .host_flags = IDE_HFLAG_LEGACY_IRQS,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2_ONLY,
- .mwdma_mask = ATA_MWDMA12_ONLY,
- .udma_mask = ATA_UDMA4,
-};
-
-static int __devinit slc90e66_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &slc90e66_chipset, NULL);
-}
-
-static const struct pci_device_id slc90e66_pci_tbl[] = {
- { PCI_VDEVICE(EFAR, PCI_DEVICE_ID_EFAR_SLC90E66_1), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, slc90e66_pci_tbl);
-
-static struct pci_driver slc90e66_pci_driver = {
- .name = "SLC90e66_IDE",
- .id_table = slc90e66_pci_tbl,
- .probe = slc90e66_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init slc90e66_ide_init(void)
-{
- return ide_pci_register_driver(&slc90e66_pci_driver);
-}
-
-static void __exit slc90e66_ide_exit(void)
-{
- pci_unregister_driver(&slc90e66_pci_driver);
-}
-
-module_init(slc90e66_ide_init);
-module_exit(slc90e66_ide_exit);
-
-MODULE_AUTHOR("Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for SLC90E66 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/tc86c001.c b/drivers/ide/pci/tc86c001.c
deleted file mode 100644
index 93e2cce4b296..000000000000
--- a/drivers/ide/pci/tc86c001.c
+++ /dev/null
@@ -1,270 +0,0 @@
-/*
- * Copyright (C) 2002 Toshiba Corporation
- * Copyright (C) 2005-2006 MontaVista Software, Inc. <source@mvista.com>
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#define DRV_NAME "tc86c001"
-
-static void tc86c001_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- unsigned long scr_port = hwif->config_data + (drive->dn ? 0x02 : 0x00);
- u16 mode, scr = inw(scr_port);
-
- switch (speed) {
- case XFER_UDMA_4: mode = 0x00c0; break;
- case XFER_UDMA_3: mode = 0x00b0; break;
- case XFER_UDMA_2: mode = 0x00a0; break;
- case XFER_UDMA_1: mode = 0x0090; break;
- case XFER_UDMA_0: mode = 0x0080; break;
- case XFER_MW_DMA_2: mode = 0x0070; break;
- case XFER_MW_DMA_1: mode = 0x0060; break;
- case XFER_MW_DMA_0: mode = 0x0050; break;
- case XFER_PIO_4: mode = 0x0400; break;
- case XFER_PIO_3: mode = 0x0300; break;
- case XFER_PIO_2: mode = 0x0200; break;
- case XFER_PIO_1: mode = 0x0100; break;
- case XFER_PIO_0:
- default: mode = 0x0000; break;
- }
-
- scr &= (speed < XFER_MW_DMA_0) ? 0xf8ff : 0xff0f;
- scr |= mode;
- outw(scr, scr_port);
-}
-
-static void tc86c001_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- tc86c001_set_mode(drive, XFER_PIO_0 + pio);
-}
-
-/*
- * HACKITY HACK
- *
- * This is a workaround for the limitation 5 of the TC86C001 IDE controller:
- * if a DMA transfer terminates prematurely, the controller leaves the device's
- * interrupt request (INTRQ) pending and does not generate a PCI interrupt (or
- * set the interrupt bit in the DMA status register), thus no PCI interrupt
- * will occur until a DMA transfer has been successfully completed.
- *
- * We work around this by initiating dummy, zero-length DMA transfer on
- * a DMA timeout expiration. I found no better way to do this with the current
- * IDE core than to temporarily replace a higher level driver's timer expiry
- * handler with our own backing up to that handler in case our recovery fails.
- */
-static int tc86c001_timer_expiry(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- ide_expiry_t *expiry = ide_get_hwifdata(hwif);
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
- u8 dma_stat = inb(hwif->dma_base + ATA_DMA_STATUS);
-
- /* Restore a higher level driver's expiry handler first. */
- hwgroup->expiry = expiry;
-
- if ((dma_stat & 5) == 1) { /* DMA active and no interrupt */
- unsigned long sc_base = hwif->config_data;
- unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- u8 dma_cmd = inb(hwif->dma_base + ATA_DMA_CMD);
-
- printk(KERN_WARNING "%s: DMA interrupt possibly stuck, "
- "attempting recovery...\n", drive->name);
-
- /* Stop DMA */
- outb(dma_cmd & ~0x01, hwif->dma_base + ATA_DMA_CMD);
-
- /* Setup the dummy DMA transfer */
- outw(0, sc_base + 0x0a); /* Sector Count */
- outw(0, twcr_port); /* Transfer Word Count 1 or 2 */
-
- /* Start the dummy DMA transfer */
-
- /* clear R_OR_WCTR for write */
- outb(0x00, hwif->dma_base + ATA_DMA_CMD);
- /* set START_STOPBM */
- outb(0x01, hwif->dma_base + ATA_DMA_CMD);
-
- /*
- * If an interrupt was pending, it should come thru shortly.
- * If not, a higher level driver's expiry handler should
- * eventually cause some kind of recovery from the DMA stall.
- */
- return WAIT_MIN_SLEEP;
- }
-
- /* Chain to the restored expiry handler if DMA wasn't active. */
- if (likely(expiry != NULL))
- return expiry(drive);
-
- /* If there was no handler, "emulate" that for ide_timer_expiry()... */
- return -1;
-}
-
-static void tc86c001_dma_start(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = HWIF(drive);
- ide_hwgroup_t *hwgroup = HWGROUP(drive);
- unsigned long sc_base = hwif->config_data;
- unsigned long twcr_port = sc_base + (drive->dn ? 0x06 : 0x04);
- unsigned long nsectors = hwgroup->rq->nr_sectors;
-
- /*
- * We have to manually load the sector count and size into
- * the appropriate system control registers for DMA to work
- * with LBA48 and ATAPI devices...
- */
- outw(nsectors, sc_base + 0x0a); /* Sector Count */
- outw(SECTOR_SIZE / 2, twcr_port); /* Transfer Word Count 1/2 */
-
- /* Install our timeout expiry hook, saving the current handler... */
- ide_set_hwifdata(hwif, hwgroup->expiry);
- hwgroup->expiry = &tc86c001_timer_expiry;
-
- ide_dma_start(drive);
-}
-
-static u8 tc86c001_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long sc_base = pci_resource_start(dev, 5);
- u16 scr1 = inw(sc_base + 0x00);
-
- /*
- * System Control 1 Register bit 13 (PDIAGN):
- * 0=80-pin cable, 1=40-pin cable
- */
- return (scr1 & 0x2000) ? ATA_CBL_PATA40 : ATA_CBL_PATA80;
-}
-
-static void __devinit init_hwif_tc86c001(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned long sc_base = pci_resource_start(dev, 5);
- u16 scr1 = inw(sc_base + 0x00);
-
- /* System Control 1 Register bit 15 (Soft Reset) set */
- outw(scr1 | 0x8000, sc_base + 0x00);
-
- /* System Control 1 Register bit 14 (FIFO Reset) set */
- outw(scr1 | 0x4000, sc_base + 0x00);
-
- /* System Control 1 Register: reset clear */
- outw(scr1 & ~0xc000, sc_base + 0x00);
-
- /* Store the system control register base for convenience... */
- hwif->config_data = sc_base;
-
- if (!hwif->dma_base)
- return;
-
- /*
- * Sector Count Control Register bits 0 and 1 set:
- * software sets Sector Count Register for master and slave device
- */
- outw(0x0003, sc_base + 0x0c);
-
- /* Sector Count Register limit */
- hwif->rqsize = 0xffff;
-}
-
-static const struct ide_port_ops tc86c001_port_ops = {
- .set_pio_mode = tc86c001_set_pio_mode,
- .set_dma_mode = tc86c001_set_mode,
- .cable_detect = tc86c001_cable_detect,
-};
-
-static const struct ide_dma_ops tc86c001_dma_ops = {
- .dma_host_set = ide_dma_host_set,
- .dma_setup = ide_dma_setup,
- .dma_exec_cmd = ide_dma_exec_cmd,
- .dma_start = tc86c001_dma_start,
- .dma_end = ide_dma_end,
- .dma_test_irq = ide_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info tc86c001_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_tc86c001,
- .port_ops = &tc86c001_port_ops,
- .dma_ops = &tc86c001_dma_ops,
- .host_flags = IDE_HFLAG_SINGLE | IDE_HFLAG_OFF_BOARD,
- .pio_mask = ATA_PIO4,
- .mwdma_mask = ATA_MWDMA2,
- .udma_mask = ATA_UDMA4,
-};
-
-static int __devinit tc86c001_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- int rc;
-
- rc = pci_enable_device(dev);
- if (rc)
- goto out;
-
- rc = pci_request_region(dev, 5, DRV_NAME);
- if (rc) {
- printk(KERN_ERR DRV_NAME ": system control regs already in use");
- goto out_disable;
- }
-
- rc = ide_pci_init_one(dev, &tc86c001_chipset, NULL);
- if (rc)
- goto out_release;
-
- goto out;
-
-out_release:
- pci_release_region(dev, 5);
-out_disable:
- pci_disable_device(dev);
-out:
- return rc;
-}
-
-static void __devexit tc86c001_remove(struct pci_dev *dev)
-{
- ide_pci_remove(dev);
- pci_release_region(dev, 5);
- pci_disable_device(dev);
-}
-
-static const struct pci_device_id tc86c001_pci_tbl[] = {
- { PCI_VDEVICE(TOSHIBA_2, PCI_DEVICE_ID_TOSHIBA_TC86C001_IDE), 0 },
- { 0, }
-};
-MODULE_DEVICE_TABLE(pci, tc86c001_pci_tbl);
-
-static struct pci_driver tc86c001_pci_driver = {
- .name = "TC86C001",
- .id_table = tc86c001_pci_tbl,
- .probe = tc86c001_init_one,
- .remove = __devexit_p(tc86c001_remove),
-};
-
-static int __init tc86c001_ide_init(void)
-{
- return ide_pci_register_driver(&tc86c001_pci_driver);
-}
-
-static void __exit tc86c001_ide_exit(void)
-{
- pci_unregister_driver(&tc86c001_pci_driver);
-}
-
-module_init(tc86c001_ide_init);
-module_exit(tc86c001_ide_exit);
-
-MODULE_AUTHOR("MontaVista Software, Inc. <source@mvista.com>");
-MODULE_DESCRIPTION("PCI driver module for TC86C001 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/triflex.c b/drivers/ide/pci/triflex.c
deleted file mode 100644
index b6ff40336aa9..000000000000
--- a/drivers/ide/pci/triflex.c
+++ /dev/null
@@ -1,142 +0,0 @@
-/*
- * IDE Chipset driver for the Compaq TriFlex IDE controller.
- *
- * Known to work with the Compaq Workstation 5x00 series.
- *
- * Copyright (C) 2002 Hewlett-Packard Development Group, L.P.
- * Author: Torben Mathiasen <torben.mathiasen@hp.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- *
- * Loosely based on the piix & svwks drivers.
- *
- * Documentation:
- * Not publically available.
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-#include <linux/init.h>
-
-#define DRV_NAME "triflex"
-
-static void triflex_set_mode(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = HWIF(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- u32 triflex_timings = 0;
- u16 timing = 0;
- u8 channel_offset = hwif->channel ? 0x74 : 0x70, unit = drive->dn & 1;
-
- pci_read_config_dword(dev, channel_offset, &triflex_timings);
-
- switch(speed) {
- case XFER_MW_DMA_2:
- timing = 0x0103;
- break;
- case XFER_MW_DMA_1:
- timing = 0x0203;
- break;
- case XFER_MW_DMA_0:
- timing = 0x0808;
- break;
- case XFER_SW_DMA_2:
- case XFER_SW_DMA_1:
- case XFER_SW_DMA_0:
- timing = 0x0f0f;
- break;
- case XFER_PIO_4:
- timing = 0x0202;
- break;
- case XFER_PIO_3:
- timing = 0x0204;
- break;
- case XFER_PIO_2:
- timing = 0x0404;
- break;
- case XFER_PIO_1:
- timing = 0x0508;
- break;
- case XFER_PIO_0:
- timing = 0x0808;
- break;
- }
-
- triflex_timings &= ~(0xFFFF << (16 * unit));
- triflex_timings |= (timing << (16 * unit));
-
- pci_write_config_dword(dev, channel_offset, triflex_timings);
-}
-
-static void triflex_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- triflex_set_mode(drive, XFER_PIO_0 + pio);
-}
-
-static const struct ide_port_ops triflex_port_ops = {
- .set_pio_mode = triflex_set_pio_mode,
- .set_dma_mode = triflex_set_mode,
-};
-
-static const struct ide_port_info triflex_device __devinitdata = {
- .name = DRV_NAME,
- .enablebits = {{0x80, 0x01, 0x01}, {0x80, 0x02, 0x02}},
- .port_ops = &triflex_port_ops,
- .pio_mask = ATA_PIO4,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int __devinit triflex_init_one(struct pci_dev *dev,
- const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &triflex_device, NULL);
-}
-
-static const struct pci_device_id triflex_pci_tbl[] = {
- { PCI_VDEVICE(COMPAQ, PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, triflex_pci_tbl);
-
-static struct pci_driver triflex_pci_driver = {
- .name = "TRIFLEX_IDE",
- .id_table = triflex_pci_tbl,
- .probe = triflex_init_one,
- .remove = ide_pci_remove,
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init triflex_ide_init(void)
-{
- return ide_pci_register_driver(&triflex_pci_driver);
-}
-
-static void __exit triflex_ide_exit(void)
-{
- pci_unregister_driver(&triflex_pci_driver);
-}
-
-module_init(triflex_ide_init);
-module_exit(triflex_ide_exit);
-
-MODULE_AUTHOR("Torben Mathiasen");
-MODULE_DESCRIPTION("PCI driver module for Compaq Triflex IDE");
-MODULE_LICENSE("GPL");
-
-
diff --git a/drivers/ide/pci/trm290.c b/drivers/ide/pci/trm290.c
deleted file mode 100644
index 75ea61526566..000000000000
--- a/drivers/ide/pci/trm290.c
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- * Copyright (c) 1997-1998 Mark Lord
- * Copyright (c) 2007 MontaVista Software, Inc. <source@mvista.com>
- *
- * May be copied or modified under the terms of the GNU General Public License
- *
- * June 22, 2004 - get rid of check_region
- * - Jesper Juhl
- *
- */
-
-/*
- * This module provides support for the bus-master IDE DMA function
- * of the Tekram TRM290 chip, used on a variety of PCI IDE add-on boards,
- * including a "Precision Instruments" board. The TRM290 pre-dates
- * the sff-8038 standard (ide-dma.c) by a few months, and differs
- * significantly enough to warrant separate routines for some functions,
- * while re-using others from ide-dma.c.
- *
- * EXPERIMENTAL! It works for me (a sample of one).
- *
- * Works reliably for me in DMA mode (READs only),
- * DMA WRITEs are disabled by default (see #define below);
- *
- * DMA is not enabled automatically for this chipset,
- * but can be turned on manually (with "hdparm -d1") at run time.
- *
- * I need volunteers with "spare" drives for further testing
- * and development, and maybe to help figure out the peculiarities.
- * Even knowing the registers (below), some things behave strangely.
- */
-
-#define TRM290_NO_DMA_WRITES /* DMA writes seem unreliable sometimes */
-
-/*
- * TRM-290 PCI-IDE2 Bus Master Chip
- * ================================
- * The configuration registers are addressed in normal I/O port space
- * and are used as follows:
- *
- * trm290_base depends on jumper settings, and is probed for by ide-dma.c
- *
- * trm290_base+2 when WRITTEN: chiptest register (byte, write-only)
- * bit7 must always be written as "1"
- * bits6-2 undefined
- * bit1 1=legacy_compatible_mode, 0=native_pci_mode
- * bit0 1=test_mode, 0=normal(default)
- *
- * trm290_base+2 when READ: status register (byte, read-only)
- * bits7-2 undefined
- * bit1 channel0 busmaster interrupt status 0=none, 1=asserted
- * bit0 channel0 interrupt status 0=none, 1=asserted
- *
- * trm290_base+3 Interrupt mask register
- * bits7-5 undefined
- * bit4 legacy_header: 1=present, 0=absent
- * bit3 channel1 busmaster interrupt status 0=none, 1=asserted (read only)
- * bit2 channel1 interrupt status 0=none, 1=asserted (read only)
- * bit1 channel1 interrupt mask: 1=masked, 0=unmasked(default)
- * bit0 channel0 interrupt mask: 1=masked, 0=unmasked(default)
- *
- * trm290_base+1 "CPR" Config Pointer Register (byte)
- * bit7 1=autoincrement CPR bits 2-0 after each access of CDR
- * bit6 1=min. 1 wait-state posted write cycle (default), 0=0 wait-state
- * bit5 0=enabled master burst access (default), 1=disable (write only)
- * bit4 PCI DEVSEL# timing select: 1=medium(default), 0=fast
- * bit3 0=primary IDE channel, 1=secondary IDE channel
- * bits2-0 register index for accesses through CDR port
- *
- * trm290_base+0 "CDR" Config Data Register (word)
- * two sets of seven config registers,
- * selected by CPR bit 3 (channel) and CPR bits 2-0 (index 0 to 6),
- * each index defined below:
- *
- * Index-0 Base address register for command block (word)
- * defaults: 0x1f0 for primary, 0x170 for secondary
- *
- * Index-1 general config register (byte)
- * bit7 1=DMA enable, 0=DMA disable
- * bit6 1=activate IDE_RESET, 0=no action (default)
- * bit5 1=enable IORDY, 0=disable IORDY (default)
- * bit4 0=16-bit data port(default), 1=8-bit (XT) data port
- * bit3 interrupt polarity: 1=active_low, 0=active_high(default)
- * bit2 power-saving-mode(?): 1=enable, 0=disable(default) (write only)
- * bit1 bus_master_mode(?): 1=enable, 0=disable(default)
- * bit0 enable_io_ports: 1=enable(default), 0=disable
- *
- * Index-2 read-ahead counter preload bits 0-7 (byte, write only)
- * bits7-0 bits7-0 of readahead count
- *
- * Index-3 read-ahead config register (byte, write only)
- * bit7 1=enable_readahead, 0=disable_readahead(default)
- * bit6 1=clear_FIFO, 0=no_action
- * bit5 undefined
- * bit4 mode4 timing control: 1=enable, 0=disable(default)
- * bit3 undefined
- * bit2 undefined
- * bits1-0 bits9-8 of read-ahead count
- *
- * Index-4 base address register for control block (word)
- * defaults: 0x3f6 for primary, 0x376 for secondary
- *
- * Index-5 data port timings (shared by both drives) (byte)
- * standard PCI "clk" (clock) counts, default value = 0xf5
- *
- * bits7-6 setup time: 00=1clk, 01=2clk, 10=3clk, 11=4clk
- * bits5-3 hold time: 000=1clk, 001=2clk, 010=3clk,
- * 011=4clk, 100=5clk, 101=6clk,
- * 110=8clk, 111=12clk
- * bits2-0 active time: 000=2clk, 001=3clk, 010=4clk,
- * 011=5clk, 100=6clk, 101=8clk,
- * 110=12clk, 111=16clk
- *
- * Index-6 command/control port timings (shared by both drives) (byte)
- * same layout as Index-5, default value = 0xde
- *
- * Suggested CDR programming for PIO mode0 (600ns):
- * 0x01f0,0x21,0xff,0x80,0x03f6,0xf5,0xde ; primary
- * 0x0170,0x21,0xff,0x80,0x0376,0xf5,0xde ; secondary
- *
- * Suggested CDR programming for PIO mode3 (180ns):
- * 0x01f0,0x21,0xff,0x80,0x03f6,0x09,0xde ; primary
- * 0x0170,0x21,0xff,0x80,0x0376,0x09,0xde ; secondary
- *
- * Suggested CDR programming for PIO mode4 (120ns):
- * 0x01f0,0x21,0xff,0x80,0x03f6,0x00,0xde ; primary
- * 0x0170,0x21,0xff,0x80,0x0376,0x00,0xde ; secondary
- *
- */
-
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/ioport.h>
-#include <linux/interrupt.h>
-#include <linux/blkdev.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/ide.h>
-
-#include <asm/io.h>
-
-#define DRV_NAME "trm290"
-
-static void trm290_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
-{
- ide_hwif_t *hwif = HWIF(drive);
- u16 reg = 0;
- unsigned long flags;
-
- /* select PIO or DMA */
- reg = use_dma ? (0x21 | 0x82) : (0x21 & ~0x82);
-
- local_irq_save(flags);
-
- if (reg != hwif->select_data) {
- hwif->select_data = reg;
- /* set PIO/DMA */
- outb(0x51 | (hwif->channel << 3), hwif->config_data + 1);
- outw(reg & 0xff, hwif->config_data);
- }
-
- /* enable IRQ if not probing */
- if (drive->dev_flags & IDE_DFLAG_PRESENT) {
- reg = inw(hwif->config_data + 3);
- reg &= 0x13;
- reg &= ~(1 << hwif->channel);
- outw(reg, hwif->config_data + 3);
- }
-
- local_irq_restore(flags);
-}
-
-static void trm290_selectproc (ide_drive_t *drive)
-{
- trm290_prepare_drive(drive, !!(drive->dev_flags & IDE_DFLAG_USING_DMA));
-}
-
-static void trm290_dma_exec_cmd(ide_drive_t *drive, u8 command)
-{
- ide_execute_command(drive, command, &ide_dma_intr, WAIT_CMD, NULL);
-}
-
-static int trm290_dma_setup(ide_drive_t *drive)
-{
- ide_hwif_t *hwif = drive->hwif;
- struct request *rq = hwif->hwgroup->rq;
- unsigned int count, rw;
-
- if (rq_data_dir(rq)) {
-#ifdef TRM290_NO_DMA_WRITES
- /* always use PIO for writes */
- trm290_prepare_drive(drive, 0); /* select PIO xfer */
- return 1;
-#endif
- rw = 1;
- } else
- rw = 2;
-
- if (!(count = ide_build_dmatable(drive, rq))) {
- /* try PIO instead of DMA */
- trm290_prepare_drive(drive, 0); /* select PIO xfer */
- return 1;
- }
- /* select DMA xfer */
- trm290_prepare_drive(drive, 1);
- outl(hwif->dmatable_dma | rw, hwif->dma_base);
- drive->waiting_for_dma = 1;
- /* start DMA */
- outw(count * 2 - 1, hwif->dma_base + 2);
- return 0;
-}
-
-static void trm290_dma_start(ide_drive_t *drive)
-{
-}
-
-static int trm290_dma_end(ide_drive_t *drive)
-{
- u16 status;
-
- drive->waiting_for_dma = 0;
- /* purge DMA mappings */
- ide_destroy_dmatable(drive);
- status = inw(HWIF(drive)->dma_base + 2);
- return status != 0x00ff;
-}
-
-static int trm290_dma_test_irq(ide_drive_t *drive)
-{
- u16 status;
-
- status = inw(HWIF(drive)->dma_base + 2);
- return status == 0x00ff;
-}
-
-static void trm290_dma_host_set(ide_drive_t *drive, int on)
-{
-}
-
-static void __devinit init_hwif_trm290(ide_hwif_t *hwif)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- unsigned int cfg_base = pci_resource_start(dev, 4);
- unsigned long flags;
- u8 reg = 0;
-
- if ((dev->class & 5) && cfg_base)
- printk(KERN_INFO DRV_NAME " %s: chip", pci_name(dev));
- else {
- cfg_base = 0x3df0;
- printk(KERN_INFO DRV_NAME " %s: using default", pci_name(dev));
- }
- printk(KERN_CONT " config base at 0x%04x\n", cfg_base);
- hwif->config_data = cfg_base;
- hwif->dma_base = (cfg_base + 4) ^ (hwif->channel ? 0x80 : 0);
-
- printk(KERN_INFO " %s: BM-DMA at 0x%04lx-0x%04lx\n",
- hwif->name, hwif->dma_base, hwif->dma_base + 3);
-
- if (ide_allocate_dma_engine(hwif))
- return;
-
- local_irq_save(flags);
- /* put config reg into first byte of hwif->select_data */
- outb(0x51 | (hwif->channel << 3), hwif->config_data + 1);
- /* select PIO as default */
- hwif->select_data = 0x21;
- outb(hwif->select_data, hwif->config_data);
- /* get IRQ info */
- reg = inb(hwif->config_data + 3);
- /* mask IRQs for both ports */
- reg = (reg & 0x10) | 0x03;
- outb(reg, hwif->config_data + 3);
- local_irq_restore(flags);
-
- if (reg & 0x10)
- /* legacy mode */
- hwif->irq = hwif->channel ? 15 : 14;
- else if (!hwif->irq && hwif->mate && hwif->mate->irq)
- /* sharing IRQ with mate */
- hwif->irq = hwif->mate->irq;
-
-#if 1
- {
- /*
- * My trm290-based card doesn't seem to work with all possible values
- * for the control basereg, so this kludge ensures that we use only
- * values that are known to work. Ugh. -ml
- */
- u16 new, old, compat = hwif->channel ? 0x374 : 0x3f4;
- static u16 next_offset = 0;
- u8 old_mask;
-
- outb(0x54 | (hwif->channel << 3), hwif->config_data + 1);
- old = inw(hwif->config_data);
- old &= ~1;
- old_mask = inb(old + 2);
- if (old != compat && old_mask == 0xff) {
- /* leave lower 10 bits untouched */
- compat += (next_offset += 0x400);
- hwif->io_ports.ctl_addr = compat + 2;
- outw(compat | 1, hwif->config_data);
- new = inw(hwif->config_data);
- printk(KERN_INFO "%s: control basereg workaround: "
- "old=0x%04x, new=0x%04x\n",
- hwif->name, old, new & ~1);
- }
- }
-#endif
-}
-
-static const struct ide_port_ops trm290_port_ops = {
- .selectproc = trm290_selectproc,
-};
-
-static struct ide_dma_ops trm290_dma_ops = {
- .dma_host_set = trm290_dma_host_set,
- .dma_setup = trm290_dma_setup,
- .dma_exec_cmd = trm290_dma_exec_cmd,
- .dma_start = trm290_dma_start,
- .dma_end = trm290_dma_end,
- .dma_test_irq = trm290_dma_test_irq,
- .dma_lost_irq = ide_dma_lost_irq,
- .dma_timeout = ide_dma_timeout,
-};
-
-static const struct ide_port_info trm290_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_hwif = init_hwif_trm290,
- .chipset = ide_trm290,
- .port_ops = &trm290_port_ops,
- .dma_ops = &trm290_dma_ops,
- .host_flags = IDE_HFLAG_NO_ATAPI_DMA |
-#if 0 /* play it safe for now */
- IDE_HFLAG_TRUST_BIOS_FOR_DMA |
-#endif
- IDE_HFLAG_NO_AUTODMA |
- IDE_HFLAG_NO_LBA48,
-};
-
-static int __devinit trm290_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- return ide_pci_init_one(dev, &trm290_chipset, NULL);
-}
-
-static const struct pci_device_id trm290_pci_tbl[] = {
- { PCI_VDEVICE(TEKRAM, PCI_DEVICE_ID_TEKRAM_DC290), 0 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, trm290_pci_tbl);
-
-static struct pci_driver trm290_pci_driver = {
- .name = "TRM290_IDE",
- .id_table = trm290_pci_tbl,
- .probe = trm290_init_one,
- .remove = ide_pci_remove,
-};
-
-static int __init trm290_ide_init(void)
-{
- return ide_pci_register_driver(&trm290_pci_driver);
-}
-
-static void __exit trm290_ide_exit(void)
-{
- pci_unregister_driver(&trm290_pci_driver);
-}
-
-module_init(trm290_ide_init);
-module_exit(trm290_ide_exit);
-
-MODULE_AUTHOR("Mark Lord");
-MODULE_DESCRIPTION("PCI driver module for Tekram TRM290 IDE");
-MODULE_LICENSE("GPL");
diff --git a/drivers/ide/pci/via82cxxx.c b/drivers/ide/pci/via82cxxx.c
deleted file mode 100644
index 2a812d3207e9..000000000000
--- a/drivers/ide/pci/via82cxxx.c
+++ /dev/null
@@ -1,514 +0,0 @@
-/*
- * VIA IDE driver for Linux. Supported southbridges:
- *
- * vt82c576, vt82c586, vt82c586a, vt82c586b, vt82c596a, vt82c596b,
- * vt82c686, vt82c686a, vt82c686b, vt8231, vt8233, vt8233c, vt8233a,
- * vt8235, vt8237, vt8237a
- *
- * Copyright (c) 2000-2002 Vojtech Pavlik
- * Copyright (c) 2007 Bartlomiej Zolnierkiewicz
- *
- * Based on the work of:
- * Michel Aubry
- * Jeff Garzik
- * Andre Hedrick
- *
- * Documentation:
- * Obsolete device documentation publically available from via.com.tw
- * Current device documentation available under NDA only
- */
-
-/*
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License version 2 as published by
- * the Free Software Foundation.
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/init.h>
-#include <linux/ide.h>
-#include <linux/dmi.h>
-
-#ifdef CONFIG_PPC_CHRP
-#include <asm/processor.h>
-#endif
-
-#define DRV_NAME "via82cxxx"
-
-#define VIA_IDE_ENABLE 0x40
-#define VIA_IDE_CONFIG 0x41
-#define VIA_FIFO_CONFIG 0x43
-#define VIA_MISC_1 0x44
-#define VIA_MISC_2 0x45
-#define VIA_MISC_3 0x46
-#define VIA_DRIVE_TIMING 0x48
-#define VIA_8BIT_TIMING 0x4e
-#define VIA_ADDRESS_SETUP 0x4c
-#define VIA_UDMA_TIMING 0x50
-
-#define VIA_BAD_PREQ 0x01 /* Crashes if PREQ# till DDACK# set */
-#define VIA_BAD_CLK66 0x02 /* 66 MHz clock doesn't work correctly */
-#define VIA_SET_FIFO 0x04 /* Needs to have FIFO split set */
-#define VIA_NO_UNMASK 0x08 /* Doesn't work with IRQ unmasking on */
-#define VIA_BAD_ID 0x10 /* Has wrong vendor ID (0x1107) */
-#define VIA_BAD_AST 0x20 /* Don't touch Address Setup Timing */
-
-/*
- * VIA SouthBridge chips.
- */
-
-static struct via_isa_bridge {
- char *name;
- u16 id;
- u8 rev_min;
- u8 rev_max;
- u8 udma_mask;
- u8 flags;
-} via_isa_bridges[] = {
- { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt6410", PCI_DEVICE_ID_VIA_6410, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237", PCI_DEVICE_ID_VIA_8237, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8237a", PCI_DEVICE_ID_VIA_8237A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8235", PCI_DEVICE_ID_VIA_8235, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8233a", PCI_DEVICE_ID_VIA_8233A, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
- { "vt8233c", PCI_DEVICE_ID_VIA_8233C_0, 0x00, 0x2f, ATA_UDMA5, },
- { "vt8233", PCI_DEVICE_ID_VIA_8233_0, 0x00, 0x2f, ATA_UDMA5, },
- { "vt8231", PCI_DEVICE_ID_VIA_8231, 0x00, 0x2f, ATA_UDMA5, },
- { "vt82c686b", PCI_DEVICE_ID_VIA_82C686, 0x40, 0x4f, ATA_UDMA5, },
- { "vt82c686a", PCI_DEVICE_ID_VIA_82C686, 0x10, 0x2f, ATA_UDMA4, },
- { "vt82c686", PCI_DEVICE_ID_VIA_82C686, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
- { "vt82c596b", PCI_DEVICE_ID_VIA_82C596, 0x10, 0x2f, ATA_UDMA4, },
- { "vt82c596a", PCI_DEVICE_ID_VIA_82C596, 0x00, 0x0f, ATA_UDMA2, VIA_BAD_CLK66 },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x47, 0x4f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x40, 0x46, ATA_UDMA2, VIA_SET_FIFO | VIA_BAD_PREQ },
- { "vt82c586b", PCI_DEVICE_ID_VIA_82C586_0, 0x30, 0x3f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586a", PCI_DEVICE_ID_VIA_82C586_0, 0x20, 0x2f, ATA_UDMA2, VIA_SET_FIFO },
- { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, 0x00, VIA_SET_FIFO },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK },
- { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, 0x00, VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID },
- { NULL }
-};
-
-static unsigned int via_clock;
-static char *via_dma[] = { "16", "25", "33", "44", "66", "100", "133" };
-
-struct via82cxxx_dev
-{
- struct via_isa_bridge *via_config;
- unsigned int via_80w;
-};
-
-/**
- * via_set_speed - write timing registers
- * @dev: PCI device
- * @dn: device
- * @timing: IDE timing data to use
- *
- * via_set_speed writes timing values to the chipset registers
- */
-
-static void via_set_speed(ide_hwif_t *hwif, u8 dn, struct ide_timing *timing)
-{
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- u8 t;
-
- if (~vdev->via_config->flags & VIA_BAD_AST) {
- pci_read_config_byte(dev, VIA_ADDRESS_SETUP, &t);
- t = (t & ~(3 << ((3 - dn) << 1))) | ((clamp_val(timing->setup, 1, 4) - 1) << ((3 - dn) << 1));
- pci_write_config_byte(dev, VIA_ADDRESS_SETUP, t);
- }
-
- pci_write_config_byte(dev, VIA_8BIT_TIMING + (1 - (dn >> 1)),
- ((clamp_val(timing->act8b, 1, 16) - 1) << 4) | (clamp_val(timing->rec8b, 1, 16) - 1));
-
- pci_write_config_byte(dev, VIA_DRIVE_TIMING + (3 - dn),
- ((clamp_val(timing->active, 1, 16) - 1) << 4) | (clamp_val(timing->recover, 1, 16) - 1));
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA2: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 5) - 2)) : 0x03; break;
- case ATA_UDMA4: t = timing->udma ? (0xe8 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x0f; break;
- case ATA_UDMA5: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
- case ATA_UDMA6: t = timing->udma ? (0xe0 | (clamp_val(timing->udma, 2, 9) - 2)) : 0x07; break;
- default: return;
- }
-
- pci_write_config_byte(dev, VIA_UDMA_TIMING + (3 - dn), t);
-}
-
-/**
- * via_set_drive - configure transfer mode
- * @drive: Drive to set up
- * @speed: desired speed
- *
- * via_set_drive() computes timing values configures the chipset to
- * a desired transfer mode. It also can be called by upper layers.
- */
-
-static void via_set_drive(ide_drive_t *drive, const u8 speed)
-{
- ide_hwif_t *hwif = drive->hwif;
- ide_drive_t *peer = ide_get_pair_dev(drive);
- struct pci_dev *dev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- struct ide_timing t, p;
- unsigned int T, UT;
-
- T = 1000000000 / via_clock;
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA2: UT = T; break;
- case ATA_UDMA4: UT = T/2; break;
- case ATA_UDMA5: UT = T/3; break;
- case ATA_UDMA6: UT = T/4; break;
- default: UT = T;
- }
-
- ide_timing_compute(drive, speed, &t, T, UT);
-
- if (peer) {
- ide_timing_compute(peer, peer->current_speed, &p, T, UT);
- ide_timing_merge(&p, &t, &t, IDE_TIMING_8BIT);
- }
-
- via_set_speed(HWIF(drive), drive->dn, &t);
-}
-
-/**
- * via_set_pio_mode - set host controller for PIO mode
- * @drive: drive
- * @pio: PIO mode number
- *
- * A callback from the upper layers for PIO-only tuning.
- */
-
-static void via_set_pio_mode(ide_drive_t *drive, const u8 pio)
-{
- via_set_drive(drive, XFER_PIO_0 + pio);
-}
-
-static struct via_isa_bridge *via_config_find(struct pci_dev **isa)
-{
- struct via_isa_bridge *via_config;
-
- for (via_config = via_isa_bridges; via_config->id; via_config++)
- if ((*isa = pci_get_device(PCI_VENDOR_ID_VIA +
- !!(via_config->flags & VIA_BAD_ID),
- via_config->id, NULL))) {
-
- if ((*isa)->revision >= via_config->rev_min &&
- (*isa)->revision <= via_config->rev_max)
- break;
- pci_dev_put(*isa);
- }
-
- return via_config;
-}
-
-/*
- * Check and handle 80-wire cable presence
- */
-static void via_cable_detect(struct via82cxxx_dev *vdev, u32 u)
-{
- int i;
-
- switch (vdev->via_config->udma_mask) {
- case ATA_UDMA4:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> (i & 16)) & 8) &&
- ((u >> i) & 0x20) &&
- (((u >> i) & 7) < 2)) {
- /*
- * 2x PCI clock and
- * UDMA w/ < 3T/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA5:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 4))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
-
- case ATA_UDMA6:
- for (i = 24; i >= 0; i -= 8)
- if (((u >> i) & 0x10) ||
- (((u >> i) & 0x20) &&
- (((u >> i) & 7) < 6))) {
- /* BIOS 80-wire bit or
- * UDMA w/ < 60ns/cycle
- */
- vdev->via_80w |= (1 << (1 - (i >> 4)));
- }
- break;
- }
-}
-
-/**
- * init_chipset_via82cxxx - initialization handler
- * @dev: PCI device
- *
- * The initialization callback. Here we determine the IDE chip type
- * and initialize its drive independent registers.
- */
-
-static unsigned int init_chipset_via82cxxx(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
- struct via_isa_bridge *via_config = vdev->via_config;
- u8 t, v;
- u32 u;
-
- /*
- * Detect cable and configure Clk66
- */
- pci_read_config_dword(dev, VIA_UDMA_TIMING, &u);
-
- via_cable_detect(vdev, u);
-
- if (via_config->udma_mask == ATA_UDMA4) {
- /* Enable Clk66 */
- pci_write_config_dword(dev, VIA_UDMA_TIMING, u|0x80008);
- } else if (via_config->flags & VIA_BAD_CLK66) {
- /* Would cause trouble on 596a and 686 */
- pci_write_config_dword(dev, VIA_UDMA_TIMING, u & ~0x80008);
- }
-
- /*
- * Check whether interfaces are enabled.
- */
-
- pci_read_config_byte(dev, VIA_IDE_ENABLE, &v);
-
- /*
- * Set up FIFO sizes and thresholds.
- */
-
- pci_read_config_byte(dev, VIA_FIFO_CONFIG, &t);
-
- /* Disable PREQ# till DDACK# */
- if (via_config->flags & VIA_BAD_PREQ) {
- /* Would crash on 586b rev 41 */
- t &= 0x7f;
- }
-
- /* Fix FIFO split between channels */
- if (via_config->flags & VIA_SET_FIFO) {
- t &= (t & 0x9f);
- switch (v & 3) {
- case 2: t |= 0x00; break; /* 16 on primary */
- case 1: t |= 0x60; break; /* 16 on secondary */
- case 3: t |= 0x20; break; /* 8 pri 8 sec */
- }
- }
-
- pci_write_config_byte(dev, VIA_FIFO_CONFIG, t);
-
- return 0;
-}
-
-/*
- * Cable special cases
- */
-
-static const struct dmi_system_id cable_dmi_table[] = {
- {
- .ident = "Acer Ferrari 3400",
- .matches = {
- DMI_MATCH(DMI_BOARD_VENDOR, "Acer,Inc."),
- DMI_MATCH(DMI_BOARD_NAME, "Ferrari 3400"),
- },
- },
- { }
-};
-
-static int via_cable_override(struct pci_dev *pdev)
-{
- /* Systems by DMI */
- if (dmi_check_system(cable_dmi_table))
- return 1;
-
- /* Arima W730-K8/Targa Visionary 811/... */
- if (pdev->subsystem_vendor == 0x161F &&
- pdev->subsystem_device == 0x2032)
- return 1;
-
- return 0;
-}
-
-static u8 via82cxxx_cable_detect(ide_hwif_t *hwif)
-{
- struct pci_dev *pdev = to_pci_dev(hwif->dev);
- struct ide_host *host = pci_get_drvdata(pdev);
- struct via82cxxx_dev *vdev = host->host_priv;
-
- if (via_cable_override(pdev))
- return ATA_CBL_PATA40_SHORT;
-
- if ((vdev->via_80w >> hwif->channel) & 1)
- return ATA_CBL_PATA80;
- else
- return ATA_CBL_PATA40;
-}
-
-static const struct ide_port_ops via_port_ops = {
- .set_pio_mode = via_set_pio_mode,
- .set_dma_mode = via_set_drive,
- .cable_detect = via82cxxx_cable_detect,
-};
-
-static const struct ide_port_info via82cxxx_chipset __devinitdata = {
- .name = DRV_NAME,
- .init_chipset = init_chipset_via82cxxx,
- .enablebits = { { 0x40, 0x02, 0x02 }, { 0x40, 0x01, 0x01 } },
- .port_ops = &via_port_ops,
- .host_flags = IDE_HFLAG_PIO_NO_BLACKLIST |
- IDE_HFLAG_POST_SET_MODE |
- IDE_HFLAG_IO_32BIT,
- .pio_mask = ATA_PIO5,
- .swdma_mask = ATA_SWDMA2,
- .mwdma_mask = ATA_MWDMA2,
-};
-
-static int __devinit via_init_one(struct pci_dev *dev, const struct pci_device_id *id)
-{
- struct pci_dev *isa = NULL;
- struct via_isa_bridge *via_config;
- struct via82cxxx_dev *vdev;
- int rc;
- u8 idx = id->driver_data;
- struct ide_port_info d;
-
- d = via82cxxx_chipset;
-
- /*
- * Find the ISA bridge and check we know what it is.
- */
- via_config = via_config_find(&isa);
- if (!via_config->id) {
- printk(KERN_WARNING DRV_NAME " %s: unknown chipset, skipping\n",
- pci_name(dev));
- return -ENODEV;
- }
-
- /*
- * Print the boot message.
- */
- printk(KERN_INFO DRV_NAME " %s: VIA %s (rev %02x) IDE %sDMA%s\n",
- pci_name(dev), via_config->name, isa->revision,
- via_config->udma_mask ? "U" : "MW",
- via_dma[via_config->udma_mask ?
- (fls(via_config->udma_mask) - 1) : 0]);
-
- pci_dev_put(isa);
-
- /*
- * Determine system bus clock.
- */
- via_clock = (ide_pci_clk ? ide_pci_clk : 33) * 1000;
-
- switch (via_clock) {
- case 33000: via_clock = 33333; break;
- case 37000: via_clock = 37500; break;
- case 41000: via_clock = 41666; break;
- }
-
- if (via_clock < 20000 || via_clock > 50000) {
- printk(KERN_WARNING DRV_NAME ": User given PCI clock speed "
- "impossible (%d), using 33 MHz instead.\n", via_clock);
- printk(KERN_WARNING DRV_NAME ": Use ide0=ata66 if you want "
- "to assume 80-wire cable.\n");
- via_clock = 33333;
- }
-
- if (idx == 0)
- d.host_flags |= IDE_HFLAG_NO_AUTODMA;
- else
- d.enablebits[1].reg = d.enablebits[0].reg = 0;
-
- if ((via_config->flags & VIA_NO_UNMASK) == 0)
- d.host_flags |= IDE_HFLAG_UNMASK_IRQS;
-
-#ifdef CONFIG_PPC_CHRP
- if (machine_is(chrp) && _chrp_type == _CHRP_Pegasos)
- d.host_flags |= IDE_HFLAG_FORCE_LEGACY_IRQS;
-#endif
-
- d.udma_mask = via_config->udma_mask;
-
- vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
- if (!vdev) {
- printk(KERN_ERR DRV_NAME " %s: out of memory :(\n",
- pci_name(dev));
- return -ENOMEM;
- }
-
- vdev->via_config = via_config;
-
- rc = ide_pci_init_one(dev, &d, vdev);
- if (rc)
- kfree(vdev);
-
- return rc;
-}
-
-static void __devexit via_remove(struct pci_dev *dev)
-{
- struct ide_host *host = pci_get_drvdata(dev);
- struct via82cxxx_dev *vdev = host->host_priv;
-
- ide_pci_remove(dev);
- kfree(vdev);
-}
-
-static const struct pci_device_id via_pci_tbl[] = {
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
- { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
- { 0, },
-};
-MODULE_DEVICE_TABLE(pci, via_pci_tbl);
-
-static struct pci_driver via_pci_driver = {
- .name = "VIA_IDE",
- .id_table = via_pci_tbl,
- .probe = via_init_one,
- .remove = __devexit_p(via_remove),
- .suspend = ide_pci_suspend,
- .resume = ide_pci_resume,
-};
-
-static int __init via_ide_init(void)
-{
- return ide_pci_register_driver(&via_pci_driver);
-}
-
-static void __exit via_ide_exit(void)
-{
- pci_unregister_driver(&via_pci_driver);
-}
-
-module_init(via_ide_init);
-module_exit(via_ide_exit);
-
-MODULE_AUTHOR("Vojtech Pavlik, Michel Aubry, Jeff Garzik, Andre Hedrick");
-MODULE_DESCRIPTION("PCI driver module for VIA IDE");
-MODULE_LICENSE("GPL");