summaryrefslogtreecommitdiff
path: root/drivers/infiniband/hw/ipath/ipath_iba6120.c
diff options
context:
space:
mode:
authorDave Olson <dave.olson@qlogic.com>2008-01-08 01:51:46 -0800
committerRoland Dreier <rolandd@cisco.com>2008-01-25 14:17:43 -0800
commitddb70c83a5ce439271f1699e52a97785a8b45b81 (patch)
treedec9a6a75c595a5348c7970cadd40465b59a4fef /drivers/infiniband/hw/ipath/ipath_iba6120.c
parent359193ef433061515fe24d57e5bd5a1318d71bc3 (diff)
IB/ipath: Minor cleanup of unused fields and chip-specific errors
Clean up some unused header fields, minor related cleanup. Signed-off-by: Dave Olson <dave.olson@qlogic.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
Diffstat (limited to 'drivers/infiniband/hw/ipath/ipath_iba6120.c')
-rw-r--r--drivers/infiniband/hw/ipath/ipath_iba6120.c79
1 files changed, 23 insertions, 56 deletions
diff --git a/drivers/infiniband/hw/ipath/ipath_iba6120.c b/drivers/infiniband/hw/ipath/ipath_iba6120.c
index 597192e912de..c7a2f50824c0 100644
--- a/drivers/infiniband/hw/ipath/ipath_iba6120.c
+++ b/drivers/infiniband/hw/ipath/ipath_iba6120.c
@@ -373,10 +373,28 @@ static const struct ipath_hwerror_msgs ipath_6120_hwerror_msgs[] = {
INFINIPATH_HWE_TXEMEMPARITYERR_PIOPBC) \
<< INFINIPATH_HWE_TXEMEMPARITYERR_SHIFT)
-static int ipath_pe_txe_recover(struct ipath_devdata *);
static void ipath_pe_put_tid_2(struct ipath_devdata *, u64 __iomem *,
u32, unsigned long);
+/*
+ * On platforms using this chip, and not having ordered WC stores, we
+ * can get TXE parity errors due to speculative reads to the PIO buffers,
+ * and this, due to a chip bug can result in (many) false parity error
+ * reports. So it's a debug print on those, and an info print on systems
+ * where the speculative reads don't occur.
+ */
+static void ipath_pe_txe_recover(struct ipath_devdata *dd)
+{
+ if (ipath_unordered_wc())
+ ipath_dbg("Recovering from TXE PIO parity error\n");
+ else {
+ ++ipath_stats.sps_txeparity;
+ dev_info(&dd->pcidev->dev,
+ "Recovering from TXE PIO parity error\n");
+ }
+}
+
+
/**
* ipath_pe_handle_hwerrors - display hardware errors.
* @dd: the infinipath device
@@ -456,35 +474,11 @@ static void ipath_pe_handle_hwerrors(struct ipath_devdata *dd, char *msg,
* occur if a processor speculative read is done to the PIO
* buffer while we are sending a packet, for example.
*/
- if ((hwerrs & TXE_PIO_PARITY) && ipath_pe_txe_recover(dd))
+ if (hwerrs & TXE_PIO_PARITY) {
+ ipath_pe_txe_recover(dd);
hwerrs &= ~TXE_PIO_PARITY;
- if (hwerrs) {
- /*
- * if any set that we aren't ignoring only make the
- * complaint once, in case it's stuck or recurring,
- * and we get here multiple times
- * Force link down, so switch knows, and
- * LEDs are turned off
- */
- if (dd->ipath_flags & IPATH_INITTED) {
- ipath_set_linkstate(dd, IPATH_IB_LINKDOWN);
- ipath_setup_pe_setextled(dd,
- INFINIPATH_IBCS_L_STATE_DOWN,
- INFINIPATH_IBCS_LT_STATE_DISABLED);
- ipath_dev_err(dd, "Fatal Hardware Error (freeze "
- "mode), no longer usable, SN %.16s\n",
- dd->ipath_serial);
- isfatal = 1;
- }
- /*
- * Mark as having had an error for driver, and also
- * for /sys and status word mapped to user programs.
- * This marks unit as not usable, until reset
- */
- *dd->ipath_statusp &= ~IPATH_STATUS_IB_READY;
- *dd->ipath_statusp |= IPATH_STATUS_HWERROR;
- dd->ipath_flags &= ~IPATH_INITTED;
- } else {
+ }
+ if (!hwerrs) {
static u32 freeze_cnt;
freeze_cnt++;
@@ -1569,33 +1563,6 @@ static void ipath_pe_read_counters(struct ipath_devdata *dd,
cntrs->RxDlidFltrCnt = 0;
}
-/*
- * On platforms using this chip, and not having ordered WC stores, we
- * can get TXE parity errors due to speculative reads to the PIO buffers,
- * and this, due to a chip bug can result in (many) false parity error
- * reports. So it's a debug print on those, and an info print on systems
- * where the speculative reads don't occur.
- * Because we can get lots of false errors, we have no upper limit
- * on recovery attempts on those platforms.
- */
-static int ipath_pe_txe_recover(struct ipath_devdata *dd)
-{
- if (ipath_unordered_wc())
- ipath_dbg("Recovering from TXE PIO parity error\n");
- else {
- int cnt = ++ipath_stats.sps_txeparity;
- if (cnt >= IPATH_MAX_PARITY_ATTEMPTS) {
- if (cnt == IPATH_MAX_PARITY_ATTEMPTS)
- ipath_dev_err(dd,
- "Too many attempts to recover from "
- "TXE parity, giving up\n");
- return 0;
- }
- dev_info(&dd->pcidev->dev,
- "Recovering from TXE PIO parity error\n");
- }
- return 1;
-}
/* no interrupt fallback for these chips */
static int ipath_pe_nointr_fallback(struct ipath_devdata *dd)