diff options
| author | Michael Krufky <mkrufky@linuxtv.org> | 2007-09-08 15:17:13 -0300 |
|---|---|---|
| committer | Mauro Carvalho Chehab <mchehab@infradead.org> | 2007-10-09 22:14:29 -0300 |
| commit | 9bc37caadffe8327683980b2323371691fa182e3 (patch) | |
| tree | 0253bee2e4fc0b13e740760399b0ca26fe2b4703 /drivers/media/video/cx23885/cx23885-core.c | |
| parent | 579f1163cd5b2a3fd96ec5b84b18a071e7da3b6b (diff) | |
V4L/DVB (6196): cx23885: add support for DViCO FusionHDTV 5 Express
This patch adds digital ATSC / QAM support for the DViCO FusionHDTV5 Express.
Remote control is supported by ir-kbd-i2c, RTC is supported by rtc-isl1208.
Signed-off-by: Michael Krufky <mkrufky@linuxtv.org>
Signed-off-by: Steven Toth <stoth@hauppauge.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
Diffstat (limited to 'drivers/media/video/cx23885/cx23885-core.c')
| -rw-r--r-- | drivers/media/video/cx23885/cx23885-core.c | 26 |
1 files changed, 26 insertions, 0 deletions
diff --git a/drivers/media/video/cx23885/cx23885-core.c b/drivers/media/video/cx23885/cx23885-core.c index 553a72ae163a..bcba19263476 100644 --- a/drivers/media/video/cx23885/cx23885-core.c +++ b/drivers/media/video/cx23885/cx23885-core.c @@ -793,6 +793,32 @@ static int cx23885_dev_setup(struct cx23885_dev *dev) cx23885_ir_init(dev); switch (dev->board) { + case CX23885_BOARD_DVICO_FUSIONHDTV_5_EXP: + dev->ts2.reg_gpcnt = VID_B_GPCNT; + dev->ts2.reg_gpcnt_ctl = VID_B_GPCNT_CTL; + dev->ts2.reg_dma_ctl = VID_B_DMA_CTL; + dev->ts2.reg_lngth = VID_B_LNGTH; + dev->ts2.reg_hw_sop_ctrl = VID_B_HW_SOP_CTL; + dev->ts2.reg_gen_ctrl = VID_B_GEN_CTL; + dev->ts2.reg_bd_pkt_status = VID_B_BD_PKT_STATUS; + dev->ts2.reg_sop_status = VID_B_SOP_STATUS; + dev->ts2.reg_fifo_ovfl_stat = VID_B_FIFO_OVFL_STAT; + dev->ts2.reg_vld_misc = VID_B_VLD_MISC; + dev->ts2.reg_ts_clk_en = VID_B_TS_CLK_EN; + dev->ts2.reg_ts_int_msk = VID_B_INT_MSK; + dev->ts2.reg_src_sel = VID_B_SRC_SEL; + + // FIXME: Make this board specific + dev->ts2.pci_irqmask = 0x02; /* TS Port 2 bit */ + dev->ts2.dma_ctl_val = 0x11; /* Enable RISC controller and Fifo */ + dev->ts2.ts_int_msk_val = 0x1111; /* TS port bits for RISC */ + dev->ts2.gen_ctrl_val = 0xc; /* Serial bus + punctured clock */ + dev->ts2.ts_clk_en_val = 0x1; /* Enable TS_CLK */ + dev->ts2.src_sel_val = CX23885_SRC_SEL_PARALLEL_MPEG_VIDEO; + + // Drive this from cards.c (portb/c) and move it outside of this switch + dev->ts2.sram_chno = SRAM_CH03; + break; default: dev->ts2.reg_gpcnt = VID_C_GPCNT; dev->ts2.reg_gpcnt_ctl = VID_C_GPCNT_CTL; |