mmc: core: Fixup broken suspend and eMMC4.5 power off notify

This patch fixes up the broken suspend sequence for eMMC with sleep
support. Additionally it reworks the eMMC4.5 Power Off Notification
feature so it fits together with the existing sleep feature.

The CMD0 based re-initialization of the eMMC at resume is re-introduced
to maintain compatiblity for devices using sleep.

A host shall use MMC_CAP2_POWEROFF_NOTIFY to enable the Power Off
Notification feature. We might be able to remove this cap later on,
if we think that Power Off Notification always is preferred over
sleep, even if the host is not able to cut the eMMC VCCQ power.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Saugata Das <saugata.das@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Chris Ball <cjb@laptop.org>

1 files changed, 0 insertions, 62 deletions

diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index 66121633c9cd..06c42cfb7c34 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -1273,48 +1273,6 @@ void mmc_set_driver_type(struct mmc_host *host, unsigned int drv_type)
 	mmc_host_clk_release(host);
 }
 
-static void mmc_poweroff_notify(struct mmc_host *host)
-{
-	struct mmc_card *card;
-	unsigned int timeout;
-	unsigned int notify_type = EXT_CSD_NO_POWER_NOTIFICATION;
-	int err = 0;
-
-	card = host->card;
-	mmc_claim_host(host);
-
-	/*
-	 * Send power notify command only if card
-	 * is mmc and notify state is powered ON
-	 */
-	if (card && mmc_card_mmc(card) &&
-	    (card->poweroff_notify_state == MMC_POWERED_ON)) {
-
-		if (host->power_notify_type == MMC_HOST_PW_NOTIFY_SHORT) {
-			notify_type = EXT_CSD_POWER_OFF_SHORT;
-			timeout = card->ext_csd.generic_cmd6_time;
-			card->poweroff_notify_state = MMC_POWEROFF_SHORT;
-		} else {
-			notify_type = EXT_CSD_POWER_OFF_LONG;
-			timeout = card->ext_csd.power_off_longtime;
-			card->poweroff_notify_state = MMC_POWEROFF_LONG;
-		}
-
-		err = mmc_switch(card, EXT_CSD_CMD_SET_NORMAL,
-				 EXT_CSD_POWER_OFF_NOTIFICATION,
-				 notify_type, timeout);
-
-		if (err && err != -EBADMSG)
-			pr_err("Device failed to respond within %d poweroff "
-			       "time. Forcefully powering down the device\n",
-			       timeout);
-
-		/* Set the card state to no notification after the poweroff */
-		card->poweroff_notify_state = MMC_NO_POWER_NOTIFICATION;
-	}
-	mmc_release_host(host);
-}
-
 /*
  * Apply power to the MMC stack.  This is a two-stage process.
  * First, we enable power to the card without the clock running.
@@ -1377,8 +1335,6 @@ static void mmc_power_up(struct mmc_host *host)
 
 void mmc_power_off(struct mmc_host *host)
 {
-	int err = 0;
-
 	if (host->ios.power_mode == MMC_POWER_OFF)
 		return;
 
@@ -1387,22 +1343,6 @@ void mmc_power_off(struct mmc_host *host)
 	host->ios.clock = 0;
 	host->ios.vdd = 0;
 
-	/*
-	 * For eMMC 4.5 device send AWAKE command before
-	 * POWER_OFF_NOTIFY command, because in sleep state
-	 * eMMC 4.5 devices respond to only RESET and AWAKE cmd
-	 */
-	if (host->card && mmc_card_is_sleep(host->card) &&
-	    host->bus_ops->resume) {
-		err = host->bus_ops->resume(host);
-
-		if (!err)
-			mmc_poweroff_notify(host);
-		else
-			pr_warning("%s: error %d during resume "
-				   "(continue with poweroff sequence)\n",
-				   mmc_hostname(host), err);
-	}
 
 	/*
 	 * Reset ocr mask to be the highest possible voltage supported for
@@ -2579,7 +2519,6 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 
 		spin_lock_irqsave(&host->lock, flags);
 		host->rescan_disable = 1;
-		host->power_notify_type = MMC_HOST_PW_NOTIFY_SHORT;
 		spin_unlock_irqrestore(&host->lock, flags);
 		cancel_delayed_work_sync(&host->detect);
 
@@ -2603,7 +2542,6 @@ int mmc_pm_notify(struct notifier_block *notify_block,
 
 		spin_lock_irqsave(&host->lock, flags);
 		host->rescan_disable = 0;
-		host->power_notify_type = MMC_HOST_PW_NOTIFY_LONG;
 		spin_unlock_irqrestore(&host->lock, flags);
 		mmc_detect_change(host, 0);