diff options
| author | Haibo Chen <haibo.chen@freescale.com> | 2015-09-15 18:32:58 +0800 |
|---|---|---|
| committer | Ulf Hansson <ulf.hansson@linaro.org> | 2015-10-26 15:59:55 +0100 |
| commit | 14a7b416434a8076afb2dea8bb51c6514b41a47b (patch) | |
| tree | 67e38d102d8dcbbb1386a070a20ab572cdd783cc /drivers/mmc/host/sdhci.c | |
| parent | 28804293b9086100ae784a15d62ebf6249db433c (diff) | |
mmc: sdhci: call sdhci_init() before request irq
sdhci_init() will clear all irqs and set the needed irqs. So
logically sdhci_init() should be called before request irq.
If not, some irqs may be triggled and handled wrongly. Take
the following into consideration, after request irq, if
SDIO card interrupt enabled, a sd card in the sd slot will
trigger a mass of interrupt(SDHCI_INT_CARD_INT), because at
this time, the vmmc-regulator still not restore, no voltage
supply for the sd card, so the pin of data0~data3 change and
keep low, interrupt(SDHCI_INT_CARD_INT) will rise up ceaselessly.
Due to we already reguest irq, system will be busy in handling
this endless irq, can't response to other event.
So we should call sdhci_init() before request irq in sd resume.
Signed-off-by: Haibo Chen <haibo.chen@freescale.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Diffstat (limited to 'drivers/mmc/host/sdhci.c')
| -rw-r--r-- | drivers/mmc/host/sdhci.c | 22 |
1 files changed, 11 insertions, 11 deletions
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index fbc7efdddcb5..2cadf0891f15 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -2716,17 +2716,6 @@ int sdhci_resume_host(struct sdhci_host *host) host->ops->enable_dma(host); } - if (!device_may_wakeup(mmc_dev(host->mmc))) { - ret = request_threaded_irq(host->irq, sdhci_irq, - sdhci_thread_irq, IRQF_SHARED, - mmc_hostname(host->mmc), host); - if (ret) - return ret; - } else { - sdhci_disable_irq_wakeups(host); - disable_irq_wake(host->irq); - } - if ((host->mmc->pm_flags & MMC_PM_KEEP_POWER) && (host->quirks2 & SDHCI_QUIRK2_HOST_OFF_CARD_ON)) { /* Card keeps power but host controller does not */ @@ -2739,6 +2728,17 @@ int sdhci_resume_host(struct sdhci_host *host) mmiowb(); } + if (!device_may_wakeup(mmc_dev(host->mmc))) { + ret = request_threaded_irq(host->irq, sdhci_irq, + sdhci_thread_irq, IRQF_SHARED, + mmc_hostname(host->mmc), host); + if (ret) + return ret; + } else { + sdhci_disable_irq_wakeups(host); + disable_irq_wake(host->irq); + } + sdhci_enable_card_detection(host); return ret; |