summaryrefslogtreecommitdiff
path: root/drivers/net/3c523.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/3c523.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/3c523.c')
-rw-r--r--drivers/net/3c523.c1323
1 files changed, 1323 insertions, 0 deletions
diff --git a/drivers/net/3c523.c b/drivers/net/3c523.c
new file mode 100644
index 000000000000..8f6b2fa13e28
--- /dev/null
+++ b/drivers/net/3c523.c
@@ -0,0 +1,1323 @@
+/*
+ net-3-driver for the 3c523 Etherlink/MC card (i82586 Ethernet chip)
+
+
+ This is an extension to the Linux operating system, and is covered by the
+ same GNU General Public License that covers that work.
+
+ Copyright 1995, 1996 by Chris Beauregard (cpbeaure@undergrad.math.uwaterloo.ca)
+
+ This is basically Michael Hipp's ni52 driver, with a new probing
+ algorithm and some minor changes to the 82586 CA and reset routines.
+ Thanks a lot Michael for a really clean i82586 implementation! Unless
+ otherwise documented in ni52.c, any bugs are mine.
+
+ Contrary to the Ethernet-HOWTO, this isn't based on the 3c507 driver in
+ any way. The ni52 is a lot easier to modify.
+
+ sources:
+ ni52.c
+
+ Crynwr packet driver collection was a great reference for my first
+ attempt at this sucker. The 3c507 driver also helped, until I noticed
+ that ni52.c was a lot nicer.
+
+ EtherLink/MC: Micro Channel Ethernet Adapter Technical Reference
+ Manual, courtesy of 3Com CardFacts, documents the 3c523-specific
+ stuff. Information on CardFacts is found in the Ethernet HOWTO.
+ Also see <a href="http://www.3com.com/">
+
+ Microprocessor Communications Support Chips, T.J. Byers, ISBN
+ 0-444-01224-9, has a section on the i82586. It tells you just enough
+ to know that you really don't want to learn how to program the chip.
+
+ The original device probe code was stolen from ps2esdi.c
+
+ Known Problems:
+ Since most of the code was stolen from ni52.c, you'll run across the
+ same bugs in the 0.62 version of ni52.c, plus maybe a few because of
+ the 3c523 idiosynchacies. The 3c523 has 16K of RAM though, so there
+ shouldn't be the overrun problem that the 8K ni52 has.
+
+ This driver is for a 16K adapter. It should work fine on the 64K
+ adapters, but it will only use one of the 4 banks of RAM. Modifying
+ this for the 64K version would require a lot of heinous bank
+ switching, which I'm sure not interested in doing. If you try to
+ implement a bank switching version, you'll basically have to remember
+ what bank is enabled and do a switch everytime you access a memory
+ location that's not current. You'll also have to remap pointers on
+ the driver side, because it only knows about 16K of the memory.
+ Anyone desperate or masochistic enough to try?
+
+ It seems to be stable now when multiple transmit buffers are used. I
+ can't see any performance difference, but then I'm working on a 386SX.
+
+ Multicast doesn't work. It doesn't even pretend to work. Don't use
+ it. Don't compile your kernel with multicast support. I don't know
+ why.
+
+ Features:
+ This driver is useable as a loadable module. If you try to specify an
+ IRQ or a IO address (via insmod 3c523.o irq=xx io=0xyyy), it will
+ search the MCA slots until it finds a 3c523 with the specified
+ parameters.
+
+ This driver does support multiple ethernet cards when used as a module
+ (up to MAX_3C523_CARDS, the default being 4)
+
+ This has been tested with both BNC and TP versions, internal and
+ external transceivers. Haven't tested with the 64K version (that I
+ know of).
+
+ History:
+ Jan 1st, 1996
+ first public release
+ Feb 4th, 1996
+ update to 1.3.59, incorporated multicast diffs from ni52.c
+ Feb 15th, 1996
+ added shared irq support
+ Apr 1999
+ added support for multiple cards when used as a module
+ added option to disable multicast as is causes problems
+ Ganesh Sittampalam <ganesh.sittampalam@magdalen.oxford.ac.uk>
+ Stuart Adamson <stuart.adamson@compsoc.net>
+ Nov 2001
+ added support for ethtool (jgarzik)
+
+ $Header: /fsys2/home/chrisb/linux-1.3.59-MCA/drivers/net/RCS/3c523.c,v 1.1 1996/02/05 01:53:46 chrisb Exp chrisb $
+ */
+
+#define DRV_NAME "3c523"
+#define DRV_VERSION "17-Nov-2001"
+
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/skbuff.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/mca-legacy.h>
+#include <linux/ethtool.h>
+#include <linux/bitops.h>
+
+#include <asm/uaccess.h>
+#include <asm/processor.h>
+#include <asm/io.h>
+
+#include "3c523.h"
+
+/*************************************************************************/
+#define DEBUG /* debug on */
+#define SYSBUSVAL 0 /* 1 = 8 Bit, 0 = 16 bit - 3c523 only does 16 bit */
+#undef ELMC_MULTICAST /* Disable multicast support as it is somewhat seriously broken at the moment */
+
+#define make32(ptr16) (p->memtop + (short) (ptr16) )
+#define make24(ptr32) ((char *) (ptr32) - p->base)
+#define make16(ptr32) ((unsigned short) ((unsigned long) (ptr32) - (unsigned long) p->memtop ))
+
+/*************************************************************************/
+/*
+ Tables to which we can map values in the configuration registers.
+ */
+static int irq_table[] __initdata = {
+ 12, 7, 3, 9
+};
+
+static int csr_table[] __initdata = {
+ 0x300, 0x1300, 0x2300, 0x3300
+};
+
+static int shm_table[] __initdata = {
+ 0x0c0000, 0x0c8000, 0x0d0000, 0x0d8000
+};
+
+/******************* how to calculate the buffers *****************************
+
+
+ * IMPORTANT NOTE: if you configure only one NUM_XMIT_BUFFS, the driver works
+ * --------------- in a different (more stable?) mode. Only in this mode it's
+ * possible to configure the driver with 'NO_NOPCOMMANDS'
+
+sizeof(scp)=12; sizeof(scb)=16; sizeof(iscp)=8;
+sizeof(scp)+sizeof(iscp)+sizeof(scb) = 36 = INIT
+sizeof(rfd) = 24; sizeof(rbd) = 12;
+sizeof(tbd) = 8; sizeof(transmit_cmd) = 16;
+sizeof(nop_cmd) = 8;
+
+ * if you don't know the driver, better do not change this values: */
+
+#define RECV_BUFF_SIZE 1524 /* slightly oversized */
+#define XMIT_BUFF_SIZE 1524 /* slightly oversized */
+#define NUM_XMIT_BUFFS 1 /* config for both, 8K and 16K shmem */
+#define NUM_RECV_BUFFS_8 4 /* config for 8K shared mem */
+#define NUM_RECV_BUFFS_16 9 /* config for 16K shared mem */
+
+#if (NUM_XMIT_BUFFS == 1)
+#define NO_NOPCOMMANDS /* only possible with NUM_XMIT_BUFFS=1 */
+#endif
+
+/**************************************************************************/
+
+#define DELAY(x) { mdelay(32 * x); }
+
+/* a much shorter delay: */
+#define DELAY_16(); { udelay(16) ; }
+
+/* wait for command with timeout: */
+#define WAIT_4_SCB_CMD() { int i; \
+ for(i=0;i<1024;i++) { \
+ if(!p->scb->cmd) break; \
+ DELAY_16(); \
+ if(i == 1023) { \
+ printk(KERN_WARNING "%s:%d: scb_cmd timed out .. resetting i82586\n",\
+ dev->name,__LINE__); \
+ elmc_id_reset586(); } } }
+
+static irqreturn_t elmc_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr);
+static int elmc_open(struct net_device *dev);
+static int elmc_close(struct net_device *dev);
+static int elmc_send_packet(struct sk_buff *, struct net_device *);
+static struct net_device_stats *elmc_get_stats(struct net_device *dev);
+static void elmc_timeout(struct net_device *dev);
+#ifdef ELMC_MULTICAST
+static void set_multicast_list(struct net_device *dev);
+#endif
+static struct ethtool_ops netdev_ethtool_ops;
+
+/* helper-functions */
+static int init586(struct net_device *dev);
+static int check586(struct net_device *dev, unsigned long where, unsigned size);
+static void alloc586(struct net_device *dev);
+static void startrecv586(struct net_device *dev);
+static void *alloc_rfa(struct net_device *dev, void *ptr);
+static void elmc_rcv_int(struct net_device *dev);
+static void elmc_xmt_int(struct net_device *dev);
+static void elmc_rnr_int(struct net_device *dev);
+
+struct priv {
+ struct net_device_stats stats;
+ unsigned long base;
+ char *memtop;
+ unsigned long mapped_start; /* Start of ioremap */
+ volatile struct rfd_struct *rfd_last, *rfd_top, *rfd_first;
+ volatile struct scp_struct *scp; /* volatile is important */
+ volatile struct iscp_struct *iscp; /* volatile is important */
+ volatile struct scb_struct *scb; /* volatile is important */
+ volatile struct tbd_struct *xmit_buffs[NUM_XMIT_BUFFS];
+#if (NUM_XMIT_BUFFS == 1)
+ volatile struct transmit_cmd_struct *xmit_cmds[2];
+ volatile struct nop_cmd_struct *nop_cmds[2];
+#else
+ volatile struct transmit_cmd_struct *xmit_cmds[NUM_XMIT_BUFFS];
+ volatile struct nop_cmd_struct *nop_cmds[NUM_XMIT_BUFFS];
+#endif
+ volatile int nop_point, num_recv_buffs;
+ volatile char *xmit_cbuffs[NUM_XMIT_BUFFS];
+ volatile int xmit_count, xmit_last;
+ volatile int slot;
+};
+
+#define elmc_attn586() {elmc_do_attn586(dev->base_addr,ELMC_CTRL_INTE);}
+#define elmc_reset586() {elmc_do_reset586(dev->base_addr,ELMC_CTRL_INTE);}
+
+/* with interrupts disabled - this will clear the interrupt bit in the
+ 3c523 control register, and won't put it back. This effectively
+ disables interrupts on the card. */
+#define elmc_id_attn586() {elmc_do_attn586(dev->base_addr,0);}
+#define elmc_id_reset586() {elmc_do_reset586(dev->base_addr,0);}
+
+/*************************************************************************/
+/*
+ Do a Channel Attention on the 3c523. This is extremely board dependent.
+ */
+static void elmc_do_attn586(int ioaddr, int ints)
+{
+ /* the 3c523 requires a minimum of 500 ns. The delays here might be
+ a little too large, and hence they may cut the performance of the
+ card slightly. If someone who knows a little more about Linux
+ timing would care to play with these, I'd appreciate it. */
+
+ /* this bit masking stuff is crap. I'd rather have separate
+ registers with strobe triggers for each of these functions. <sigh>
+ Ya take what ya got. */
+
+ outb(ELMC_CTRL_RST | 0x3 | ELMC_CTRL_CA | ints, ioaddr + ELMC_CTRL);
+ DELAY_16(); /* > 500 ns */
+ outb(ELMC_CTRL_RST | 0x3 | ints, ioaddr + ELMC_CTRL);
+}
+
+/*************************************************************************/
+/*
+ Reset the 82586 on the 3c523. Also very board dependent.
+ */
+static void elmc_do_reset586(int ioaddr, int ints)
+{
+ /* toggle the RST bit low then high */
+ outb(0x3 | ELMC_CTRL_LBK, ioaddr + ELMC_CTRL);
+ DELAY_16(); /* > 500 ns */
+ outb(ELMC_CTRL_RST | ELMC_CTRL_LBK | 0x3, ioaddr + ELMC_CTRL);
+
+ elmc_do_attn586(ioaddr, ints);
+}
+
+/**********************************************
+ * close device
+ */
+
+static int elmc_close(struct net_device *dev)
+{
+ netif_stop_queue(dev);
+ elmc_id_reset586(); /* the hard way to stop the receiver */
+ free_irq(dev->irq, dev);
+ return 0;
+}
+
+/**********************************************
+ * open device
+ */
+
+static int elmc_open(struct net_device *dev)
+{
+ int ret;
+
+ elmc_id_attn586(); /* disable interrupts */
+
+ ret = request_irq(dev->irq, &elmc_interrupt, SA_SHIRQ | SA_SAMPLE_RANDOM,
+ dev->name, dev);
+ if (ret) {
+ printk(KERN_ERR "%s: couldn't get irq %d\n", dev->name, dev->irq);
+ elmc_id_reset586();
+ return ret;
+ }
+ alloc586(dev);
+ init586(dev);
+ startrecv586(dev);
+ netif_start_queue(dev);
+ return 0; /* most done by init */
+}
+
+/**********************************************
+ * Check to see if there's an 82586 out there.
+ */
+
+static int __init check586(struct net_device *dev, unsigned long where, unsigned size)
+{
+ struct priv *p = (struct priv *) dev->priv;
+ char *iscp_addrs[2];
+ int i = 0;
+
+ p->base = (unsigned long) isa_bus_to_virt((unsigned long)where) + size - 0x01000000;
+ p->memtop = isa_bus_to_virt((unsigned long)where) + size;
+ p->scp = (struct scp_struct *)(p->base + SCP_DEFAULT_ADDRESS);
+ memset((char *) p->scp, 0, sizeof(struct scp_struct));
+ p->scp->sysbus = SYSBUSVAL; /* 1 = 8Bit-Bus, 0 = 16 Bit */
+
+ iscp_addrs[0] = isa_bus_to_virt((unsigned long)where);
+ iscp_addrs[1] = (char *) p->scp - sizeof(struct iscp_struct);
+
+ for (i = 0; i < 2; i++) {
+ p->iscp = (struct iscp_struct *) iscp_addrs[i];
+ memset((char *) p->iscp, 0, sizeof(struct iscp_struct));
+
+ p->scp->iscp = make24(p->iscp);
+ p->iscp->busy = 1;
+
+ elmc_id_reset586();
+
+ /* reset586 does an implicit CA */
+
+ /* apparently, you sometimes have to kick the 82586 twice... */
+ elmc_id_attn586();
+ DELAY(1);
+
+ if (p->iscp->busy) { /* i82586 clears 'busy' after successful init */
+ return 0;
+ }
+ }
+ return 1;
+}
+
+/******************************************************************
+ * set iscp at the right place, called by elmc_probe and open586.
+ */
+
+void alloc586(struct net_device *dev)
+{
+ struct priv *p = (struct priv *) dev->priv;
+
+ elmc_id_reset586();
+ DELAY(2);
+
+ p->scp = (struct scp_struct *) (p->base + SCP_DEFAULT_ADDRESS);
+ p->scb = (struct scb_struct *) isa_bus_to_virt(dev->mem_start);
+ p->iscp = (struct iscp_struct *) ((char *) p->scp - sizeof(struct iscp_struct));
+
+ memset((char *) p->iscp, 0, sizeof(struct iscp_struct));
+ memset((char *) p->scp, 0, sizeof(struct scp_struct));
+
+ p->scp->iscp = make24(p->iscp);
+ p->scp->sysbus = SYSBUSVAL;
+ p->iscp->scb_offset = make16(p->scb);
+
+ p->iscp->busy = 1;
+ elmc_id_reset586();
+ elmc_id_attn586();
+
+ DELAY(2);
+
+ if (p->iscp->busy) {
+ printk(KERN_ERR "%s: Init-Problems (alloc).\n", dev->name);
+ }
+ memset((char *) p->scb, 0, sizeof(struct scb_struct));
+}
+
+/*****************************************************************/
+
+static int elmc_getinfo(char *buf, int slot, void *d)
+{
+ int len = 0;
+ struct net_device *dev = (struct net_device *) d;
+ int i;
+
+ if (dev == NULL)
+ return len;
+
+ len += sprintf(buf + len, "Revision: 0x%x\n",
+ inb(dev->base_addr + ELMC_REVISION) & 0xf);
+ len += sprintf(buf + len, "IRQ: %d\n", dev->irq);
+ len += sprintf(buf + len, "IO Address: %#lx-%#lx\n", dev->base_addr,
+ dev->base_addr + ELMC_IO_EXTENT);
+ len += sprintf(buf + len, "Memory: %#lx-%#lx\n", dev->mem_start,
+ dev->mem_end - 1);
+ len += sprintf(buf + len, "Transceiver: %s\n", dev->if_port ?
+ "External" : "Internal");
+ len += sprintf(buf + len, "Device: %s\n", dev->name);
+ len += sprintf(buf + len, "Hardware Address:");
+ for (i = 0; i < 6; i++) {
+ len += sprintf(buf + len, " %02x", dev->dev_addr[i]);
+ }
+ buf[len++] = '\n';
+ buf[len] = 0;
+
+ return len;
+} /* elmc_getinfo() */
+
+/*****************************************************************/
+
+static int __init do_elmc_probe(struct net_device *dev)
+{
+ static int slot;
+ int base_addr = dev->base_addr;
+ int irq = dev->irq;
+ u_char status = 0;
+ u_char revision = 0;
+ int i = 0;
+ unsigned int size = 0;
+ int retval;
+ struct priv *pr = dev->priv;
+
+ SET_MODULE_OWNER(dev);
+ if (MCA_bus == 0) {
+ return -ENODEV;
+ }
+ /* search through the slots for the 3c523. */
+ slot = mca_find_adapter(ELMC_MCA_ID, 0);
+ while (slot != -1) {
+ status = mca_read_stored_pos(slot, 2);
+
+ dev->irq=irq_table[(status & ELMC_STATUS_IRQ_SELECT) >> 6];
+ dev->base_addr=csr_table[(status & ELMC_STATUS_CSR_SELECT) >> 1];
+
+ /*
+ If we're trying to match a specified irq or IO address,
+ we'll reject a match unless it's what we're looking for.
+ Also reject it if the card is already in use.
+ */
+
+ if ((irq && irq != dev->irq) ||
+ (base_addr && base_addr != dev->base_addr)) {
+ slot = mca_find_adapter(ELMC_MCA_ID, slot + 1);
+ continue;
+ }
+ if (!request_region(dev->base_addr, ELMC_IO_EXTENT, DRV_NAME)) {
+ slot = mca_find_adapter(ELMC_MCA_ID, slot + 1);
+ continue;
+ }
+
+ /* found what we're looking for... */
+ break;
+ }
+
+ /* we didn't find any 3c523 in the slots we checked for */
+ if (slot == MCA_NOTFOUND)
+ return ((base_addr || irq) ? -ENXIO : -ENODEV);
+
+ mca_set_adapter_name(slot, "3Com 3c523 Etherlink/MC");
+ mca_set_adapter_procfn(slot, (MCA_ProcFn) elmc_getinfo, dev);
+
+ /* if we get this far, adapter has been found - carry on */
+ printk(KERN_INFO "%s: 3c523 adapter found in slot %d\n", dev->name, slot + 1);
+
+ /* Now we extract configuration info from the card.
+ The 3c523 provides information in two of the POS registers, but
+ the second one is only needed if we want to tell the card what IRQ
+ to use. I suspect that whoever sets the thing up initially would
+ prefer we don't screw with those things.
+
+ Note that we read the status info when we found the card...
+
+ See 3c523.h for more details.
+ */
+
+ /* revision is stored in the first 4 bits of the revision register */
+ revision = inb(dev->base_addr + ELMC_REVISION) & 0xf;
+
+ /* according to docs, we read the interrupt and write it back to
+ the IRQ select register, since the POST might not configure the IRQ
+ properly. */
+ switch (dev->irq) {
+ case 3:
+ mca_write_pos(slot, 3, 0x04);
+ break;
+ case 7:
+ mca_write_pos(slot, 3, 0x02);
+ break;
+ case 9:
+ mca_write_pos(slot, 3, 0x08);
+ break;
+ case 12:
+ mca_write_pos(slot, 3, 0x01);
+ break;
+ }
+
+ memset(pr, 0, sizeof(struct priv));
+ pr->slot = slot;
+
+ printk(KERN_INFO "%s: 3Com 3c523 Rev 0x%x at %#lx\n", dev->name, (int) revision,
+ dev->base_addr);
+
+ /* Determine if we're using the on-board transceiver (i.e. coax) or
+ an external one. The information is pretty much useless, but I
+ guess it's worth brownie points. */
+ dev->if_port = (status & ELMC_STATUS_DISABLE_THIN);
+
+ /* The 3c523 has a 24K chunk of memory. The first 16K is the
+ shared memory, while the last 8K is for the EtherStart BIOS ROM.
+ Which we don't care much about here. We'll just tell Linux that
+ we're using 16K. MCA won't permit address space conflicts caused
+ by not mapping the other 8K. */
+ dev->mem_start = shm_table[(status & ELMC_STATUS_MEMORY_SELECT) >> 3];
+
+ /* We're using MCA, so it's a given that the information about memory
+ size is correct. The Crynwr drivers do something like this. */
+
+ elmc_id_reset586(); /* seems like a good idea before checking it... */
+
+ size = 0x4000; /* check for 16K mem */
+ if (!check586(dev, dev->mem_start, size)) {
+ printk(KERN_ERR "%s: memprobe, Can't find memory at 0x%lx!\n", dev->name,
+ dev->mem_start);
+ retval = -ENODEV;
+ goto err_out;
+ }
+ dev->mem_end = dev->mem_start + size; /* set mem_end showed by 'ifconfig' */
+
+ pr->memtop = isa_bus_to_virt(dev->mem_start) + size;
+ pr->base = (unsigned long) isa_bus_to_virt(dev->mem_start) + size - 0x01000000;
+ alloc586(dev);
+
+ elmc_id_reset586(); /* make sure it doesn't generate spurious ints */
+
+ /* set number of receive-buffs according to memsize */
+ pr->num_recv_buffs = NUM_RECV_BUFFS_16;
+
+ /* dump all the assorted information */
+ printk(KERN_INFO "%s: IRQ %d, %sternal xcvr, memory %#lx-%#lx.\n", dev->name,
+ dev->irq, dev->if_port ? "ex" : "in",
+ dev->mem_start, dev->mem_end - 1);
+
+ /* The hardware address for the 3c523 is stored in the first six
+ bytes of the IO address. */
+ printk(KERN_INFO "%s: hardware address ", dev->name);
+ for (i = 0; i < 6; i++) {
+ dev->dev_addr[i] = inb(dev->base_addr + i);
+ printk(" %02x", dev->dev_addr[i]);
+ }
+ printk("\n");
+
+ dev->open = &elmc_open;
+ dev->stop = &elmc_close;
+ dev->get_stats = &elmc_get_stats;
+ dev->hard_start_xmit = &elmc_send_packet;
+ dev->tx_timeout = &elmc_timeout;
+ dev->watchdog_timeo = HZ;
+#ifdef ELMC_MULTICAST
+ dev->set_multicast_list = &set_multicast_list;
+#else
+ dev->set_multicast_list = NULL;
+#endif
+ dev->ethtool_ops = &netdev_ethtool_ops;
+
+ /* note that we haven't actually requested the IRQ from the kernel.
+ That gets done in elmc_open(). I'm not sure that's such a good idea,
+ but it works, so I'll go with it. */
+
+#ifndef ELMC_MULTICAST
+ dev->flags&=~IFF_MULTICAST; /* Multicast doesn't work */
+#endif
+
+ return 0;
+err_out:
+ mca_set_adapter_procfn(slot, NULL, NULL);
+ release_region(dev->base_addr, ELMC_IO_EXTENT);
+ return retval;
+}
+
+static void cleanup_card(struct net_device *dev)
+{
+ mca_set_adapter_procfn(((struct priv *) (dev->priv))->slot, NULL, NULL);
+ release_region(dev->base_addr, ELMC_IO_EXTENT);
+}
+
+#ifndef MODULE
+struct net_device * __init elmc_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct priv));
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+
+ err = do_elmc_probe(dev);
+ if (err)
+ goto out;
+ err = register_netdev(dev);
+ if (err)
+ goto out1;
+ return dev;
+out1:
+ cleanup_card(dev);
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+}
+#endif
+
+/**********************************************
+ * init the chip (elmc-interrupt should be disabled?!)
+ * needs a correct 'allocated' memory
+ */
+
+static int init586(struct net_device *dev)
+{
+ void *ptr;
+ unsigned long s;
+ int i, result = 0;
+ struct priv *p = (struct priv *) dev->priv;
+ volatile struct configure_cmd_struct *cfg_cmd;
+ volatile struct iasetup_cmd_struct *ias_cmd;
+ volatile struct tdr_cmd_struct *tdr_cmd;
+ volatile struct mcsetup_cmd_struct *mc_cmd;
+ struct dev_mc_list *dmi = dev->mc_list;
+ int num_addrs = dev->mc_count;
+
+ ptr = (void *) ((char *) p->scb + sizeof(struct scb_struct));
+
+ cfg_cmd = (struct configure_cmd_struct *) ptr; /* configure-command */
+ cfg_cmd->cmd_status = 0;
+ cfg_cmd->cmd_cmd = CMD_CONFIGURE | CMD_LAST;
+ cfg_cmd->cmd_link = 0xffff;
+
+ cfg_cmd->byte_cnt = 0x0a; /* number of cfg bytes */
+ cfg_cmd->fifo = 0x08; /* fifo-limit (8=tx:32/rx:64) */
+ cfg_cmd->sav_bf = 0x40; /* hold or discard bad recv frames (bit 7) */
+ cfg_cmd->adr_len = 0x2e; /* addr_len |!src_insert |pre-len |loopback */
+ cfg_cmd->priority = 0x00;
+ cfg_cmd->ifs = 0x60;
+ cfg_cmd->time_low = 0x00;
+ cfg_cmd->time_high = 0xf2;
+ cfg_cmd->promisc = 0;
+ if (dev->flags & (IFF_ALLMULTI | IFF_PROMISC)) {
+ cfg_cmd->promisc = 1;
+ dev->flags |= IFF_PROMISC;
+ }
+ cfg_cmd->carr_coll = 0x00;
+
+ p->scb->cbl_offset = make16(cfg_cmd);
+
+ p->scb->cmd = CUC_START; /* cmd.-unit start */
+ elmc_id_attn586();
+
+ s = jiffies; /* warning: only active with interrupts on !! */
+ while (!(cfg_cmd->cmd_status & STAT_COMPL)) {
+ if (jiffies - s > 30*HZ/100)
+ break;
+ }
+
+ if ((cfg_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_COMPL | STAT_OK)) {
+ printk(KERN_WARNING "%s (elmc): configure command failed: %x\n", dev->name, cfg_cmd->cmd_status);
+ return 1;
+ }
+ /*
+ * individual address setup
+ */
+ ias_cmd = (struct iasetup_cmd_struct *) ptr;
+
+ ias_cmd->cmd_status = 0;
+ ias_cmd->cmd_cmd = CMD_IASETUP | CMD_LAST;
+ ias_cmd->cmd_link = 0xffff;
+
+ memcpy((char *) &ias_cmd->iaddr, (char *) dev->dev_addr, ETH_ALEN);
+
+ p->scb->cbl_offset = make16(ias_cmd);
+
+ p->scb->cmd = CUC_START; /* cmd.-unit start */
+ elmc_id_attn586();
+
+ s = jiffies;
+ while (!(ias_cmd->cmd_status & STAT_COMPL)) {
+ if (jiffies - s > 30*HZ/100)
+ break;
+ }
+
+ if ((ias_cmd->cmd_status & (STAT_OK | STAT_COMPL)) != (STAT_OK | STAT_COMPL)) {
+ printk(KERN_WARNING "%s (elmc): individual address setup command failed: %04x\n", dev->name, ias_cmd->cmd_status);
+ return 1;
+ }
+ /*
+ * TDR, wire check .. e.g. no resistor e.t.c
+ */
+ tdr_cmd = (struct tdr_cmd_struct *) ptr;
+
+ tdr_cmd->cmd_status = 0;
+ tdr_cmd->cmd_cmd = CMD_TDR | CMD_LAST;
+ tdr_cmd->cmd_link = 0xffff;
+ tdr_cmd->status = 0;
+
+ p->scb->cbl_offset = make16(tdr_cmd);
+
+ p->scb->cmd = CUC_START; /* cmd.-unit start */
+ elmc_attn586();
+
+ s = jiffies;
+ while (!(tdr_cmd->cmd_status & STAT_COMPL)) {
+ if (jiffies - s > 30*HZ/100) {
+ printk(KERN_WARNING "%s: %d Problems while running the TDR.\n", dev->name, __LINE__);
+ result = 1;
+ break;
+ }
+ }
+
+ if (!result) {
+ DELAY(2); /* wait for result */
+ result = tdr_cmd->status;
+
+ p->scb->cmd = p->scb->status & STAT_MASK;
+ elmc_id_attn586(); /* ack the interrupts */
+
+ if (result & TDR_LNK_OK) {
+ /* empty */
+ } else if (result & TDR_XCVR_PRB) {
+ printk(KERN_WARNING "%s: TDR: Transceiver problem!\n", dev->name);
+ } else if (result & TDR_ET_OPN) {
+ printk(KERN_WARNING "%s: TDR: No correct termination %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+ } else if (result & TDR_ET_SRT) {
+ if (result & TDR_TIMEMASK) /* time == 0 -> strange :-) */
+ printk(KERN_WARNING "%s: TDR: Detected a short circuit %d clocks away.\n", dev->name, result & TDR_TIMEMASK);
+ } else {
+ printk(KERN_WARNING "%s: TDR: Unknown status %04x\n", dev->name, result);
+ }
+ }
+ /*
+ * ack interrupts
+ */
+ p->scb->cmd = p->scb->status & STAT_MASK;
+ elmc_id_attn586();
+
+ /*
+ * alloc nop/xmit-cmds
+ */
+#if (NUM_XMIT_BUFFS == 1)
+ for (i = 0; i < 2; i++) {
+ p->nop_cmds[i] = (struct nop_cmd_struct *) ptr;
+ p->nop_cmds[i]->cmd_cmd = CMD_NOP;
+ p->nop_cmds[i]->cmd_status = 0;
+ p->nop_cmds[i]->cmd_link = make16((p->nop_cmds[i]));
+ ptr = (char *) ptr + sizeof(struct nop_cmd_struct);
+ }
+ p->xmit_cmds[0] = (struct transmit_cmd_struct *) ptr; /* transmit cmd/buff 0 */
+ ptr = (char *) ptr + sizeof(struct transmit_cmd_struct);
+#else
+ for (i = 0; i < NUM_XMIT_BUFFS; i++) {
+ p->nop_cmds[i] = (struct nop_cmd_struct *) ptr;
+ p->nop_cmds[i]->cmd_cmd = CMD_NOP;
+ p->nop_cmds[i]->cmd_status = 0;
+ p->nop_cmds[i]->cmd_link = make16((p->nop_cmds[i]));
+ ptr = (char *) ptr + sizeof(struct nop_cmd_struct);
+ p->xmit_cmds[i] = (struct transmit_cmd_struct *) ptr; /*transmit cmd/buff 0 */
+ ptr = (char *) ptr + sizeof(struct transmit_cmd_struct);
+ }
+#endif
+
+ ptr = alloc_rfa(dev, (void *) ptr); /* init receive-frame-area */
+
+ /*
+ * Multicast setup
+ */
+
+ if (dev->mc_count) {
+ /* I don't understand this: do we really need memory after the init? */
+ int len = ((char *) p->iscp - (char *) ptr - 8) / 6;
+ if (len <= 0) {
+ printk(KERN_ERR "%s: Ooooops, no memory for MC-Setup!\n", dev->name);
+ } else {
+ if (len < num_addrs) {
+ num_addrs = len;
+ printk(KERN_WARNING "%s: Sorry, can only apply %d MC-Address(es).\n",
+ dev->name, num_addrs);
+ }
+ mc_cmd = (struct mcsetup_cmd_struct *) ptr;
+ mc_cmd->cmd_status = 0;
+ mc_cmd->cmd_cmd = CMD_MCSETUP | CMD_LAST;
+ mc_cmd->cmd_link = 0xffff;
+ mc_cmd->mc_cnt = num_addrs * 6;
+ for (i = 0; i < num_addrs; i++) {
+ memcpy((char *) mc_cmd->mc_list[i], dmi->dmi_addr, 6);
+ dmi = dmi->next;
+ }
+ p->scb->cbl_offset = make16(mc_cmd);
+ p->scb->cmd = CUC_START;
+ elmc_id_attn586();
+ s = jiffies;
+ while (!(mc_cmd->cmd_status & STAT_COMPL)) {
+ if (jiffies - s > 30*HZ/100)
+ break;
+ }
+ if (!(mc_cmd->cmd_status & STAT_COMPL)) {
+ printk(KERN_WARNING "%s: Can't apply multicast-address-list.\n", dev->name);
+ }
+ }
+ }
+ /*
+ * alloc xmit-buffs / init xmit_cmds
+ */
+ for (i = 0; i < NUM_XMIT_BUFFS; i++) {
+ p->xmit_cbuffs[i] = (char *) ptr; /* char-buffs */
+ ptr = (char *) ptr + XMIT_BUFF_SIZE;
+ p->xmit_buffs[i] = (struct tbd_struct *) ptr; /* TBD */
+ ptr = (char *) ptr + sizeof(struct tbd_struct);
+ if ((void *) ptr > (void *) p->iscp) {
+ printk(KERN_ERR "%s: not enough shared-mem for your configuration!\n", dev->name);
+ return 1;
+ }
+ memset((char *) (p->xmit_cmds[i]), 0, sizeof(struct transmit_cmd_struct));
+ memset((char *) (p->xmit_buffs[i]), 0, sizeof(struct tbd_struct));
+ p->xmit_cmds[i]->cmd_status = STAT_COMPL;
+ p->xmit_cmds[i]->cmd_cmd = CMD_XMIT | CMD_INT;
+ p->xmit_cmds[i]->tbd_offset = make16((p->xmit_buffs[i]));
+ p->xmit_buffs[i]->next = 0xffff;
+ p->xmit_buffs[i]->buffer = make24((p->xmit_cbuffs[i]));
+ }
+
+ p->xmit_count = 0;
+ p->xmit_last = 0;
+#ifndef NO_NOPCOMMANDS
+ p->nop_point = 0;
+#endif
+
+ /*
+ * 'start transmitter' (nop-loop)
+ */
+#ifndef NO_NOPCOMMANDS
+ p->scb->cbl_offset = make16(p->nop_cmds[0]);
+ p->scb->cmd = CUC_START;
+ elmc_id_attn586();
+ WAIT_4_SCB_CMD();
+#else
+ p->xmit_cmds[0]->cmd_link = 0xffff;
+ p->xmit_cmds[0]->cmd_cmd = CMD_XMIT | CMD_LAST | CMD_INT;
+#endif
+
+ return 0;
+}
+
+/******************************************************
+ * This is a helper routine for elmc_rnr_int() and init586().
+ * It sets up the Receive Frame Area (RFA).
+ */
+
+static void *alloc_rfa(struct net_device *dev, void *ptr)
+{
+ volatile struct rfd_struct *rfd = (struct rfd_struct *) ptr;
+ volatile struct rbd_struct *rbd;
+ int i;
+ struct priv *p = (struct priv *) dev->priv;
+
+ memset((char *) rfd, 0, sizeof(struct rfd_struct) * p->num_recv_buffs);
+ p->rfd_first = rfd;
+
+ for (i = 0; i < p->num_recv_buffs; i++) {
+ rfd[i].next = make16(rfd + (i + 1) % p->num_recv_buffs);
+ }
+ rfd[p->num_recv_buffs - 1].last = RFD_SUSP; /* RU suspend */
+
+ ptr = (void *) (rfd + p->num_recv_buffs);
+
+ rbd = (struct rbd_struct *) ptr;
+ ptr = (void *) (rbd + p->num_recv_buffs);
+
+ /* clr descriptors */
+ memset((char *) rbd, 0, sizeof(struct rbd_struct) * p->num_recv_buffs);
+
+ for (i = 0; i < p->num_recv_buffs; i++) {
+ rbd[i].next = make16((rbd + (i + 1) % p->num_recv_buffs));
+ rbd[i].size = RECV_BUFF_SIZE;
+ rbd[i].buffer = make24(ptr);
+ ptr = (char *) ptr + RECV_BUFF_SIZE;
+ }
+
+ p->rfd_top = p->rfd_first;
+ p->rfd_last = p->rfd_first + p->num_recv_buffs - 1;
+
+ p->scb->rfa_offset = make16(p->rfd_first);
+ p->rfd_first->rbd_offset = make16(rbd);
+
+ return ptr;
+}
+
+
+/**************************************************
+ * Interrupt Handler ...
+ */
+
+static irqreturn_t
+elmc_interrupt(int irq, void *dev_id, struct pt_regs *reg_ptr)
+{
+ struct net_device *dev = (struct net_device *) dev_id;
+ unsigned short stat;
+ struct priv *p;
+
+ if (dev == NULL) {
+ printk(KERN_ERR "elmc-interrupt: irq %d for unknown device.\n", (int) -(((struct pt_regs *) reg_ptr)->orig_eax + 2));
+ return IRQ_NONE;
+ } else if (!netif_running(dev)) {
+ /* The 3c523 has this habit of generating interrupts during the
+ reset. I'm not sure if the ni52 has this same problem, but it's
+ really annoying if we haven't finished initializing it. I was
+ hoping all the elmc_id_* commands would disable this, but I
+ might have missed a few. */
+
+ elmc_id_attn586(); /* ack inter. and disable any more */
+ return IRQ_HANDLED;
+ } else if (!(ELMC_CTRL_INT & inb(dev->base_addr + ELMC_CTRL))) {
+ /* wasn't this device */
+ return IRQ_NONE;
+ }
+ /* reading ELMC_CTRL also clears the INT bit. */
+
+ p = (struct priv *) dev->priv;
+
+ while ((stat = p->scb->status & STAT_MASK))
+ {
+ p->scb->cmd = stat;
+ elmc_attn586(); /* ack inter. */
+
+ if (stat & STAT_CX) {
+ /* command with I-bit set complete */
+ elmc_xmt_int(dev);
+ }
+ if (stat & STAT_FR) {
+ /* received a frame */
+ elmc_rcv_int(dev);
+ }
+#ifndef NO_NOPCOMMANDS
+ if (stat & STAT_CNA) {
+ /* CU went 'not ready' */
+ if (netif_running(dev)) {
+ printk(KERN_WARNING "%s: oops! CU has left active state. stat: %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+ }
+ }
+#endif
+
+ if (stat & STAT_RNR) {
+ /* RU went 'not ready' */
+
+ if (p->scb->status & RU_SUSPEND) {
+ /* special case: RU_SUSPEND */
+
+ WAIT_4_SCB_CMD();
+ p->scb->cmd = RUC_RESUME;
+ elmc_attn586();
+ } else {
+ printk(KERN_WARNING "%s: Receiver-Unit went 'NOT READY': %04x/%04x.\n", dev->name, (int) stat, (int) p->scb->status);
+ elmc_rnr_int(dev);
+ }
+ }
+ WAIT_4_SCB_CMD(); /* wait for ack. (elmc_xmt_int can be faster than ack!!) */
+ if (p->scb->cmd) { /* timed out? */
+ break;
+ }
+ }
+ return IRQ_HANDLED;
+}
+
+/*******************************************************
+ * receive-interrupt
+ */
+
+static void elmc_rcv_int(struct net_device *dev)
+{
+ int status;
+ unsigned short totlen;
+ struct sk_buff *skb;
+ struct rbd_struct *rbd;
+ struct priv *p = (struct priv *) dev->priv;
+
+ for (; (status = p->rfd_top->status) & STAT_COMPL;) {
+ rbd = (struct rbd_struct *) make32(p->rfd_top->rbd_offset);
+
+ if (status & STAT_OK) { /* frame received without error? */
+ if ((totlen = rbd->status) & RBD_LAST) { /* the first and the last buffer? */
+ totlen &= RBD_MASK; /* length of this frame */
+ rbd->status = 0;
+ skb = (struct sk_buff *) dev_alloc_skb(totlen + 2);
+ if (skb != NULL) {
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* 16 byte alignment */
+ skb_put(skb,totlen);
+ eth_copy_and_sum(skb, (char *) p->base+(unsigned long) rbd->buffer,totlen,0);
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+ dev->last_rx = jiffies;
+ p->stats.rx_packets++;
+ p->stats.rx_bytes += totlen;
+ } else {
+ p->stats.rx_dropped++;
+ }
+ } else {
+ printk(KERN_WARNING "%s: received oversized frame.\n", dev->name);
+ p->stats.rx_dropped++;
+ }
+ } else { /* frame !(ok), only with 'save-bad-frames' */
+ printk(KERN_WARNING "%s: oops! rfd-error-status: %04x\n", dev->name, status);
+ p->stats.rx_errors++;
+ }
+ p->rfd_top->status = 0;
+ p->rfd_top->last = RFD_SUSP;
+ p->rfd_last->last = 0; /* delete RU_SUSP */
+ p->rfd_last = p->rfd_top;
+ p->rfd_top = (struct rfd_struct *) make32(p->rfd_top->next); /* step to next RFD */
+ }
+}
+
+/**********************************************************
+ * handle 'Receiver went not ready'.
+ */
+
+static void elmc_rnr_int(struct net_device *dev)
+{
+ struct priv *p = (struct priv *) dev->priv;
+
+ p->stats.rx_errors++;
+
+ WAIT_4_SCB_CMD(); /* wait for the last cmd */
+ p->scb->cmd = RUC_ABORT; /* usually the RU is in the 'no resource'-state .. abort it now. */
+ elmc_attn586();
+ WAIT_4_SCB_CMD(); /* wait for accept cmd. */
+
+ alloc_rfa(dev, (char *) p->rfd_first);
+ startrecv586(dev); /* restart RU */
+
+ printk(KERN_WARNING "%s: Receive-Unit restarted. Status: %04x\n", dev->name, p->scb->status);
+
+}
+
+/**********************************************************
+ * handle xmit - interrupt
+ */
+
+static void elmc_xmt_int(struct net_device *dev)
+{
+ int status;
+ struct priv *p = (struct priv *) dev->priv;
+
+ status = p->xmit_cmds[p->xmit_last]->cmd_status;
+ if (!(status & STAT_COMPL)) {
+ printk(KERN_WARNING "%s: strange .. xmit-int without a 'COMPLETE'\n", dev->name);
+ }
+ if (status & STAT_OK) {
+ p->stats.tx_packets++;
+ p->stats.collisions += (status & TCMD_MAXCOLLMASK);
+ } else {
+ p->stats.tx_errors++;
+ if (status & TCMD_LATECOLL) {
+ printk(KERN_WARNING "%s: late collision detected.\n", dev->name);
+ p->stats.collisions++;
+ } else if (status & TCMD_NOCARRIER) {
+ p->stats.tx_carrier_errors++;
+ printk(KERN_WARNING "%s: no carrier detected.\n", dev->name);
+ } else if (status & TCMD_LOSTCTS) {
+ printk(KERN_WARNING "%s: loss of CTS detected.\n", dev->name);
+ } else if (status & TCMD_UNDERRUN) {
+ p->stats.tx_fifo_errors++;
+ printk(KERN_WARNING "%s: DMA underrun detected.\n", dev->name);
+ } else if (status & TCMD_MAXCOLL) {
+ printk(KERN_WARNING "%s: Max. collisions exceeded.\n", dev->name);
+ p->stats.collisions += 16;
+ }
+ }
+
+#if (NUM_XMIT_BUFFS != 1)
+ if ((++p->xmit_last) == NUM_XMIT_BUFFS) {
+ p->xmit_last = 0;
+ }
+#endif
+
+ netif_wake_queue(dev);
+}
+
+/***********************************************************
+ * (re)start the receiver
+ */
+
+static void startrecv586(struct net_device *dev)
+{
+ struct priv *p = (struct priv *) dev->priv;
+
+ p->scb->rfa_offset = make16(p->rfd_first);
+ p->scb->cmd = RUC_START;
+ elmc_attn586(); /* start cmd. */
+ WAIT_4_SCB_CMD(); /* wait for accept cmd. (no timeout!!) */
+}
+
+/******************************************************
+ * timeout
+ */
+
+static void elmc_timeout(struct net_device *dev)
+{
+ struct priv *p = (struct priv *) dev->priv;
+ /* COMMAND-UNIT active? */
+ if (p->scb->status & CU_ACTIVE) {
+#ifdef DEBUG
+ printk("%s: strange ... timeout with CU active?!?\n", dev->name);
+ printk("%s: X0: %04x N0: %04x N1: %04x %d\n", dev->name, (int) p->xmit_cmds[0]->cmd_status, (int) p->nop_cmds[0]->cmd_status, (int) p->nop_cmds[1]->cmd_status, (int) p->nop_point);
+#endif
+ p->scb->cmd = CUC_ABORT;
+ elmc_attn586();
+ WAIT_4_SCB_CMD();
+ p->scb->cbl_offset = make16(p->nop_cmds[p->nop_point]);
+ p->scb->cmd = CUC_START;
+ elmc_attn586();
+ WAIT_4_SCB_CMD();
+ netif_wake_queue(dev);
+ } else {
+#ifdef DEBUG
+ printk("%s: xmitter timed out, try to restart! stat: %04x\n", dev->name, p->scb->status);
+ printk("%s: command-stats: %04x %04x\n", dev->name, p->xmit_cmds[0]->cmd_status, p->xmit_cmds[1]->cmd_status);
+#endif
+ elmc_close(dev);
+ elmc_open(dev);
+ }
+}
+
+/******************************************************
+ * send frame
+ */
+
+static int elmc_send_packet(struct sk_buff *skb, struct net_device *dev)
+{
+ int len;
+ int i;
+#ifndef NO_NOPCOMMANDS
+ int next_nop;
+#endif
+ struct priv *p = (struct priv *) dev->priv;
+
+ netif_stop_queue(dev);
+
+ len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
+
+ if (len != skb->len)
+ memset((char *) p->xmit_cbuffs[p->xmit_count], 0, ETH_ZLEN);
+ memcpy((char *) p->xmit_cbuffs[p->xmit_count], (char *) (skb->data), skb->len);
+
+#if (NUM_XMIT_BUFFS == 1)
+#ifdef NO_NOPCOMMANDS
+ p->xmit_buffs[0]->size = TBD_LAST | len;
+ for (i = 0; i < 16; i++) {
+ p->scb->cbl_offset = make16(p->xmit_cmds[0]);
+ p->scb->cmd = CUC_START;
+ p->xmit_cmds[0]->cmd_status = 0;
+ elmc_attn586();
+ dev->trans_start = jiffies;
+ if (!i) {
+ dev_kfree_skb(skb);
+ }
+ WAIT_4_SCB_CMD();
+ if ((p->scb->status & CU_ACTIVE)) { /* test it, because CU sometimes doesn't start immediately */
+ break;
+ }
+ if (p->xmit_cmds[0]->cmd_status) {
+ break;
+ }
+ if (i == 15) {
+ printk(KERN_WARNING "%s: Can't start transmit-command.\n", dev->name);
+ }
+ }
+#else
+ next_nop = (p->nop_point + 1) & 0x1;
+ p->xmit_buffs[0]->size = TBD_LAST | len;
+
+ p->xmit_cmds[0]->cmd_link = p->nop_cmds[next_nop]->cmd_link
+ = make16((p->nop_cmds[next_nop]));
+ p->xmit_cmds[0]->cmd_status = p->nop_cmds[next_nop]->cmd_status = 0;
+
+ p->nop_cmds[p->nop_point]->cmd_link = make16((p->xmit_cmds[0]));
+ dev->trans_start = jiffies;
+ p->nop_point = next_nop;
+ dev_kfree_skb(skb);
+#endif
+#else
+ p->xmit_buffs[p->xmit_count]->size = TBD_LAST | len;
+ if ((next_nop = p->xmit_count + 1) == NUM_XMIT_BUFFS) {
+ next_nop = 0;
+ }
+ p->xmit_cmds[p->xmit_count]->cmd_status = 0;
+ p->xmit_cmds[p->xmit_count]->cmd_link = p->nop_cmds[next_nop]->cmd_link
+ = make16((p->nop_cmds[next_nop]));
+ p->nop_cmds[next_nop]->cmd_status = 0;
+ p->nop_cmds[p->xmit_count]->cmd_link = make16((p->xmit_cmds[p->xmit_count]));
+ dev->trans_start = jiffies;
+ p->xmit_count = next_nop;
+ if (p->xmit_count != p->xmit_last)
+ netif_wake_queue(dev);
+ dev_kfree_skb(skb);
+#endif
+ return 0;
+}
+
+/*******************************************
+ * Someone wanna have the statistics
+ */
+
+static struct net_device_stats *elmc_get_stats(struct net_device *dev)
+{
+ struct priv *p = (struct priv *) dev->priv;
+ unsigned short crc, aln, rsc, ovrn;
+
+ crc = p->scb->crc_errs; /* get error-statistic from the ni82586 */
+ p->scb->crc_errs -= crc;
+ aln = p->scb->aln_errs;
+ p->scb->aln_errs -= aln;
+ rsc = p->scb->rsc_errs;
+ p->scb->rsc_errs -= rsc;
+ ovrn = p->scb->ovrn_errs;
+ p->scb->ovrn_errs -= ovrn;
+
+ p->stats.rx_crc_errors += crc;
+ p->stats.rx_fifo_errors += ovrn;
+ p->stats.rx_frame_errors += aln;
+ p->stats.rx_dropped += rsc;
+
+ return &p->stats;
+}
+
+/********************************************************
+ * Set MC list ..
+ */
+
+#ifdef ELMC_MULTICAST
+static void set_multicast_list(struct net_device *dev)
+{
+ if (!dev->start) {
+ /* without a running interface, promiscuous doesn't work */
+ return;
+ }
+ dev->start = 0;
+ alloc586(dev);
+ init586(dev);
+ startrecv586(dev);
+ dev->start = 1;
+}
+#endif
+
+static void netdev_get_drvinfo(struct net_device *dev,
+ struct ethtool_drvinfo *info)
+{
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->bus_info, "MCA 0x%lx", dev->base_addr);
+}
+
+static struct ethtool_ops netdev_ethtool_ops = {
+ .get_drvinfo = netdev_get_drvinfo,
+};
+
+#ifdef MODULE
+
+/* Increase if needed ;) */
+#define MAX_3C523_CARDS 4
+
+static struct net_device *dev_elmc[MAX_3C523_CARDS];
+static int irq[MAX_3C523_CARDS];
+static int io[MAX_3C523_CARDS];
+module_param_array(irq, int, NULL, 0);
+module_param_array(io, int, NULL, 0);
+MODULE_PARM_DESC(io, "EtherLink/MC I/O base address(es)");
+MODULE_PARM_DESC(irq, "EtherLink/MC IRQ number(s)");
+
+int init_module(void)
+{
+ int this_dev,found = 0;
+
+ /* Loop until we either can't find any more cards, or we have MAX_3C523_CARDS */
+ for(this_dev=0; this_dev<MAX_3C523_CARDS; this_dev++) {
+ struct net_device *dev = alloc_etherdev(sizeof(struct priv));
+ if (!dev)
+ break;
+ dev->irq=irq[this_dev];
+ dev->base_addr=io[this_dev];
+ if (do_elmc_probe(dev) == 0) {
+ if (register_netdev(dev) == 0) {
+ dev_elmc[this_dev] = dev;
+ found++;
+ continue;
+ }
+ cleanup_card(dev);
+ }
+ free_netdev(dev);
+ if (io[this_dev]==0)
+ break;
+ printk(KERN_WARNING "3c523.c: No 3c523 card found at io=%#x\n",io[this_dev]);
+ }
+
+ if(found==0) {
+ if(io[0]==0) printk(KERN_NOTICE "3c523.c: No 3c523 cards found\n");
+ return -ENXIO;
+ } else return 0;
+}
+
+void cleanup_module(void)
+{
+ int this_dev;
+ for (this_dev=0; this_dev<MAX_3C523_CARDS; this_dev++) {
+ struct net_device *dev = dev_elmc[this_dev];
+ if (dev) {
+ unregister_netdev(dev);
+ cleanup_card(dev);
+ free_netdev(dev);
+ }
+ }
+}
+
+#endif /* MODULE */