summaryrefslogtreecommitdiff
path: root/drivers/net/bnx2x
diff options
context:
space:
mode:
authorYaniv Rosner <yanivr@broadcom.com>2011-08-02 22:59:40 +0000
committerDavid S. Miller <davem@davemloft.net>2011-08-03 03:22:17 -0700
commit793bd450370bf85cd63cccaff5e2f1a62908a52f (patch)
treec7fe42c8222837dce3b763992cbc6e177b8e70e2 /drivers/net/bnx2x
parent157fa283a7cb5bc6a55dd4e0daf6eeef66adf354 (diff)
bnx2x: Fix LED behavior
This fix resolve two problems seen regarding LED: 1. LED doesn't flash during port identification. 2. Traffic LED sometimes do not blink. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/bnx2x')
-rw-r--r--drivers/net/bnx2x/bnx2x_link.c24
1 files changed, 17 insertions, 7 deletions
diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c
index 45255bdc5136..d8f6eff2d6b4 100644
--- a/drivers/net/bnx2x/bnx2x_link.c
+++ b/drivers/net/bnx2x/bnx2x_link.c
@@ -5922,20 +5922,30 @@ int bnx2x_set_led(struct link_params *params,
tmp = EMAC_RD(bp, EMAC_REG_EMAC_LED);
EMAC_WR(bp, EMAC_REG_EMAC_LED,
(tmp | EMAC_LED_OVERRIDE));
- return rc;
+ /*
+ * return here without enabling traffic
+ * LED blink andsetting rate in ON mode.
+ * In oper mode, enabling LED blink
+ * and setting rate is needed.
+ */
+ if (mode == LED_MODE_ON)
+ return rc;
}
- } else if (SINGLE_MEDIA_DIRECT(params) &&
- (CHIP_IS_E1x(bp) ||
- CHIP_IS_E2(bp))) {
+ } else if (SINGLE_MEDIA_DIRECT(params)) {
/*
* This is a work-around for HW issue found when link
* is up in CL73
*/
- REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1);
- } else {
+ if (CHIP_IS_E1x(bp) ||
+ CHIP_IS_E2(bp) ||
+ (mode == LED_MODE_ON))
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, 0);
+ else
+ REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4,
+ hw_led_mode);
+ } else
REG_WR(bp, NIG_REG_LED_MODE_P0 + port*4, hw_led_mode);
- }
REG_WR(bp, NIG_REG_LED_CONTROL_OVERRIDE_TRAFFIC_P0 + port*4, 0);
/* Set blinking rate to ~15.9Hz */