diff options
| author | Andrew Lunn <andrew@lunn.ch> | 2015-05-06 01:09:49 +0200 |
|---|---|---|
| committer | David S. Miller <davem@davemloft.net> | 2015-05-09 16:05:53 -0400 |
| commit | 15966a2a76f57ee45479cc3e7d28dd105f09260a (patch) | |
| tree | d4f30724f2d2565c4fa53fe6c066b60136ce3b05 /drivers/net/dsa/mv88e6352.c | |
| parent | dbde9e6667166f17d6d70a08becb05c596cb8fb5 (diff) | |
net: dsa: Converting remaining registers to mnemonics
Use defines for registers, shifts and bits in the remaining register
accesses in the individual drivers, in order to aid readability.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/dsa/mv88e6352.c')
| -rw-r--r-- | drivers/net/dsa/mv88e6352.c | 10 |
1 files changed, 8 insertions, 2 deletions
diff --git a/drivers/net/dsa/mv88e6352.c b/drivers/net/dsa/mv88e6352.c index 41d113749878..e9aca7f7945e 100644 --- a/drivers/net/dsa/mv88e6352.c +++ b/drivers/net/dsa/mv88e6352.c @@ -47,7 +47,9 @@ static char *mv88e6352_probe(struct device *host_dev, int sw_addr) static int mv88e6352_setup_global(struct dsa_switch *ds) { + u32 upstream_port = dsa_upstream_port(ds); int ret; + u32 reg; ret = mv88e6xxx_setup_global(ds); if (ret) @@ -56,13 +58,17 @@ static int mv88e6352_setup_global(struct dsa_switch *ds) /* Discard packets with excessive collisions, * mask all interrupt sources, enable PPU (bit 14, undocumented). */ - REG_WRITE(REG_GLOBAL, 0x04, 0x6000); + REG_WRITE(REG_GLOBAL, GLOBAL_CONTROL, + GLOBAL_CONTROL_PPU_ENABLE | GLOBAL_CONTROL_DISCARD_EXCESS); /* Configure the upstream port, and configure the upstream * port as the port to which ingress and egress monitor frames * are to be sent. */ - REG_WRITE(REG_GLOBAL, 0x1a, (dsa_upstream_port(ds) * 0x1110)); + reg = upstream_port << GLOBAL_MONITOR_CONTROL_INGRESS_SHIFT | + upstream_port << GLOBAL_MONITOR_CONTROL_EGRESS_SHIFT | + upstream_port << GLOBAL_MONITOR_CONTROL_ARP_SHIFT; + REG_WRITE(REG_GLOBAL, GLOBAL_MONITOR_CONTROL, reg); /* Disable remote management for now, and set the switch's * DSA device number. |