diff options
| author | Raanan Avargil <raanan.avargil@intel.com> | 2015-12-22 15:35:04 +0200 |
|---|---|---|
| committer | Jeff Kirsher <jeffrey.t.kirsher@intel.com> | 2016-02-24 14:50:21 -0800 |
| commit | c5c6d07761a9ff64f0ffff2ca410a578fb7c4579 (patch) | |
| tree | f4a8caf1a69bfb509baca50018741d81105b1cb9 /drivers/net/ethernet/intel/e1000e/ich8lan.h | |
| parent | c26f40daf4e32f970b8337a88b65a8d00332ae6f (diff) | |
e1000e: Clear ULP configuration register on ULP exit
There have been bugs caused by HW ULP configuration settings not being
properly cleared after cable connect in V-Pro capable systems.
This caused HW to get out of sync occasionally.
The fix ensures that ULP settings are cleared in HW after
LAN cable re-connect.
Signed-off-by: Raanan Avargil <raanan.avargil@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/ethernet/intel/e1000e/ich8lan.h')
| -rw-r--r-- | drivers/net/ethernet/intel/e1000e/ich8lan.h | 4 |
1 files changed, 4 insertions, 0 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/ich8lan.h b/drivers/net/ethernet/intel/e1000e/ich8lan.h index 7d85f002c3d2..2311f6003f58 100644 --- a/drivers/net/ethernet/intel/e1000e/ich8lan.h +++ b/drivers/net/ethernet/intel/e1000e/ich8lan.h @@ -188,6 +188,10 @@ #define I218_ULP_CONFIG1_INBAND_EXIT 0x0020 /* Inband on ULP exit */ #define I218_ULP_CONFIG1_WOL_HOST 0x0040 /* WoL Host on ULP exit */ #define I218_ULP_CONFIG1_RESET_TO_SMBUS 0x0100 /* Reset to SMBus mode */ +/* enable ULP even if when phy powered down via lanphypc */ +#define I218_ULP_CONFIG1_EN_ULP_LANPHYPC 0x0400 +/* disable clear of sticky ULP on PERST */ +#define I218_ULP_CONFIG1_DIS_CLR_STICKY_ON_PERST 0x0800 #define I218_ULP_CONFIG1_DISABLE_SMB_PERST 0x1000 /* Disable on PERST# */ /* SMBus Address Phy Register */ |