net/mlx5e: In case of LAG, one switch parent id is used for all representors

When the uplink representors are put into lag, set all the
representors (VFs and uplinks) of the same NIC to return the same
switchdev id.

Currently, the route lookup code on the encapsulation offload path
assumes that same switchdev id for the source and dest devices means
that the dest is also mlx5 HW netdev. This doesn't hold anymore when we
align the switchdev Id of the uplinks to be same, which in turn causes
the bond/team to return that id to the caller. As such, enhance the
relevant check to take into account the uplink lag case.

Signed-off-by: Rabie Loulou <rabiel@mellanox.com>
Signed-off-by: Aviv Heller <avivh@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

1 files changed, 31 insertions, 10 deletions

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
index c1515f013501..d5d161ab0dbc 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/en/tc_tun.c
@@ -14,7 +14,8 @@ static int mlx5e_route_lookup_ipv4(struct mlx5e_priv *priv,
 				   u8 *out_ttl)
 {
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
-	struct mlx5e_rep_priv *uplink_rpriv;
+	struct net_device *uplink_dev, *uplink_upper;
+	bool dst_is_lag_dev;
 	struct rtable *rt;
 	struct neighbour *n = NULL;
 
@@ -28,10 +29,20 @@ static int mlx5e_route_lookup_ipv4(struct mlx5e_priv *priv,
 #else
 	return -EOPNOTSUPP;
 #endif
-	uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
-	/* if the egress device isn't on the same HW e-switch, we use the uplink */
-	if (!switchdev_port_same_parent_id(priv->netdev, rt->dst.dev))
-		*out_dev = uplink_rpriv->netdev;
+
+	uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
+	uplink_upper = netdev_master_upper_dev_get(uplink_dev);
+	dst_is_lag_dev = (uplink_upper &&
+			  netif_is_lag_master(uplink_upper) &&
+			  rt->dst.dev == uplink_upper &&
+			  mlx5_lag_is_active(priv->mdev));
+
+	/* if the egress device isn't on the same HW e-switch or
+	 * it's a LAG device, use the uplink
+	 */
+	if (!switchdev_port_same_parent_id(priv->netdev, rt->dst.dev) ||
+	    dst_is_lag_dev)
+		*out_dev = uplink_dev;
 	else
 		*out_dev = rt->dst.dev;
 
@@ -65,8 +76,9 @@ static int mlx5e_route_lookup_ipv6(struct mlx5e_priv *priv,
 	struct dst_entry *dst;
 
 #if IS_ENABLED(CONFIG_INET) && IS_ENABLED(CONFIG_IPV6)
-	struct mlx5e_rep_priv *uplink_rpriv;
 	struct mlx5_eswitch *esw = priv->mdev->priv.eswitch;
+	struct net_device *uplink_dev, *uplink_upper;
+	bool dst_is_lag_dev;
 	int ret;
 
 	ret = ipv6_stub->ipv6_dst_lookup(dev_net(mirred_dev), NULL, &dst,
@@ -77,10 +89,19 @@ static int mlx5e_route_lookup_ipv6(struct mlx5e_priv *priv,
 	if (!(*out_ttl))
 		*out_ttl = ip6_dst_hoplimit(dst);
 
-	uplink_rpriv = mlx5_eswitch_get_uplink_priv(esw, REP_ETH);
-	/* if the egress device isn't on the same HW e-switch, we use the uplink */
-	if (!switchdev_port_same_parent_id(priv->netdev, dst->dev))
-		*out_dev = uplink_rpriv->netdev;
+	uplink_dev = mlx5_eswitch_uplink_get_proto_dev(esw, REP_ETH);
+	uplink_upper = netdev_master_upper_dev_get(uplink_dev);
+	dst_is_lag_dev = (uplink_upper &&
+			  netif_is_lag_master(uplink_upper) &&
+			  dst->dev == uplink_upper &&
+			  mlx5_lag_is_active(priv->mdev));
+
+	/* if the egress device isn't on the same HW e-switch or
+	 * it's a LAG device, use the uplink
+	 */
+	if (!switchdev_port_same_parent_id(priv->netdev, dst->dev) ||
+	    dst_is_lag_dev)
+		*out_dev = uplink_dev;
 	else
 		*out_dev = dst->dev;
 #else