summaryrefslogtreecommitdiff
path: root/drivers/net/ewrk3.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/ewrk3.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/ewrk3.c')
-rw-r--r--drivers/net/ewrk3.c2007
1 files changed, 2007 insertions, 0 deletions
diff --git a/drivers/net/ewrk3.c b/drivers/net/ewrk3.c
new file mode 100644
index 000000000000..dcf969b20be9
--- /dev/null
+++ b/drivers/net/ewrk3.c
@@ -0,0 +1,2007 @@
+/* ewrk3.c: A DIGITAL EtherWORKS 3 ethernet driver for Linux.
+
+ Written 1994 by David C. Davies.
+
+ Copyright 1994 Digital Equipment Corporation.
+
+ This software may be used and distributed according to the terms of
+ the GNU General Public License, incorporated herein by reference.
+
+ This driver is written for the Digital Equipment Corporation series
+ of EtherWORKS ethernet cards:
+
+ DE203 Turbo (BNC)
+ DE204 Turbo (TP)
+ DE205 Turbo (TP BNC)
+
+ The driver has been tested on a relatively busy network using the DE205
+ card and benchmarked with 'ttcp': it transferred 16M of data at 975kB/s
+ (7.8Mb/s) to a DECstation 5000/200.
+
+ The author may be reached at davies@maniac.ultranet.com.
+
+ =========================================================================
+ This driver has been written substantially from scratch, although its
+ inheritance of style and stack interface from 'depca.c' and in turn from
+ Donald Becker's 'lance.c' should be obvious.
+
+ The DE203/4/5 boards all use a new proprietary chip in place of the
+ LANCE chip used in prior cards (DEPCA, DE100, DE200/1/2, DE210, DE422).
+ Use the depca.c driver in the standard distribution for the LANCE based
+ cards from DIGITAL; this driver will not work with them.
+
+ The DE203/4/5 cards have 2 main modes: shared memory and I/O only. I/O
+ only makes all the card accesses through I/O transactions and no high
+ (shared) memory is used. This mode provides a >48% performance penalty
+ and is deprecated in this driver, although allowed to provide initial
+ setup when hardstrapped.
+
+ The shared memory mode comes in 3 flavours: 2kB, 32kB and 64kB. There is
+ no point in using any mode other than the 2kB mode - their performances
+ are virtually identical, although the driver has been tested in the 2kB
+ and 32kB modes. I would suggest you uncomment the line:
+
+ FORCE_2K_MODE;
+
+ to allow the driver to configure the card as a 2kB card at your current
+ base address, thus leaving more room to clutter your system box with
+ other memory hungry boards.
+
+ As many ISA and EISA cards can be supported under this driver as you
+ wish, limited primarily by the available IRQ lines, rather than by the
+ available I/O addresses (24 ISA, 16 EISA). I have checked different
+ configurations of multiple depca cards and ewrk3 cards and have not
+ found a problem yet (provided you have at least depca.c v0.38) ...
+
+ The board IRQ setting must be at an unused IRQ which is auto-probed
+ using Donald Becker's autoprobe routines. All these cards are at
+ {5,10,11,15}.
+
+ No 16MB memory limitation should exist with this driver as DMA is not
+ used and the common memory area is in low memory on the network card (my
+ current system has 20MB and I've not had problems yet).
+
+ The ability to load this driver as a loadable module has been included
+ and used extensively during the driver development (to save those long
+ reboot sequences). To utilise this ability, you have to do 8 things:
+
+ 0) have a copy of the loadable modules code installed on your system.
+ 1) copy ewrk3.c from the /linux/drivers/net directory to your favourite
+ temporary directory.
+ 2) edit the source code near line 1898 to reflect the I/O address and
+ IRQ you're using.
+ 3) compile ewrk3.c, but include -DMODULE in the command line to ensure
+ that the correct bits are compiled (see end of source code).
+ 4) if you are wanting to add a new card, goto 5. Otherwise, recompile a
+ kernel with the ewrk3 configuration turned off and reboot.
+ 5) insmod ewrk3.o
+ [Alan Cox: Changed this so you can insmod ewrk3.o irq=x io=y]
+ [Adam Kropelin: now accepts irq=x1,x2 io=y1,y2 for multiple cards]
+ 6) run the net startup bits for your new eth?? interface manually
+ (usually /etc/rc.inet[12] at boot time).
+ 7) enjoy!
+
+ Note that autoprobing is not allowed in loadable modules - the system is
+ already up and running and you're messing with interrupts.
+
+ To unload a module, turn off the associated interface
+ 'ifconfig eth?? down' then 'rmmod ewrk3'.
+
+ Promiscuous mode has been turned off in this driver, but all the
+ multicast address bits have been turned on. This improved the send
+ performance on a busy network by about 13%.
+
+ Ioctl's have now been provided (primarily because I wanted to grab some
+ packet size statistics). They are patterned after 'plipconfig.c' from a
+ suggestion by Alan Cox. Using these ioctls, you can enable promiscuous
+ mode, add/delete multicast addresses, change the hardware address, get
+ packet size distribution statistics and muck around with the control and
+ status register. I'll add others if and when the need arises.
+
+ TO DO:
+ ------
+
+
+ Revision History
+ ----------------
+
+ Version Date Description
+
+ 0.1 26-aug-94 Initial writing. ALPHA code release.
+ 0.11 31-aug-94 Fixed: 2k mode memory base calc.,
+ LeMAC version calc.,
+ IRQ vector assignments during autoprobe.
+ 0.12 31-aug-94 Tested working on LeMAC2 (DE20[345]-AC) card.
+ Fixed up MCA hash table algorithm.
+ 0.20 4-sep-94 Added IOCTL functionality.
+ 0.21 14-sep-94 Added I/O mode.
+ 0.21axp 15-sep-94 Special version for ALPHA AXP Linux V1.0.
+ 0.22 16-sep-94 Added more IOCTLs & tidied up.
+ 0.23 21-sep-94 Added transmit cut through.
+ 0.24 31-oct-94 Added uid checks in some ioctls.
+ 0.30 1-nov-94 BETA code release.
+ 0.31 5-dec-94 Added check/allocate region code.
+ 0.32 16-jan-95 Broadcast packet fix.
+ 0.33 10-Feb-95 Fix recognition bug reported by <bkm@star.rl.ac.uk>.
+ 0.40 27-Dec-95 Rationalise MODULE and autoprobe code.
+ Rewrite for portability & updated.
+ ALPHA support from <jestabro@amt.tay1.dec.com>
+ Added verify_area() calls in ewrk3_ioctl() from
+ suggestion by <heiko@colossus.escape.de>.
+ Add new multicasting code.
+ 0.41 20-Jan-96 Fix IRQ set up problem reported by
+ <kenneth@bbs.sas.ntu.ac.sg>.
+ 0.42 22-Apr-96 Fix alloc_device() bug <jari@markkus2.fimr.fi>
+ 0.43 16-Aug-96 Update alloc_device() to conform to de4x5.c
+ 0.44 08-Nov-01 use library crc32 functions <Matt_Domsch@dell.com>
+ 0.45 19-Jul-02 fix unaligned access on alpha <martin@bruli.net>
+ 0.46 10-Oct-02 Multiple NIC support when module <akropel1@rochester.rr.com>
+ 0.47 18-Oct-02 ethtool support <akropel1@rochester.rr.com>
+ 0.48 18-Oct-02 cli/sti removal for 2.5 <vda@port.imtp.ilyichevsk.odessa.ua>
+ ioctl locking, signature search cleanup <akropel1@rochester.rr.com>
+
+ =========================================================================
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/ioport.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/crc32.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/skbuff.h>
+#include <linux/ethtool.h>
+#include <linux/time.h>
+#include <linux/types.h>
+#include <linux/unistd.h>
+#include <linux/ctype.h>
+#include <linux/bitops.h>
+
+#include <asm/io.h>
+#include <asm/dma.h>
+#include <asm/uaccess.h>
+
+#include "ewrk3.h"
+
+#define DRV_NAME "ewrk3"
+#define DRV_VERSION "0.48"
+
+static char version[] __initdata =
+DRV_NAME ":v" DRV_VERSION " 2002/10/18 davies@maniac.ultranet.com\n";
+
+#ifdef EWRK3_DEBUG
+static int ewrk3_debug = EWRK3_DEBUG;
+#else
+static int ewrk3_debug = 1;
+#endif
+
+#define EWRK3_NDA 0xffe0 /* No Device Address */
+
+#define PROBE_LENGTH 32
+#define ETH_PROM_SIG 0xAA5500FFUL
+
+#ifndef EWRK3_SIGNATURE
+#define EWRK3_SIGNATURE {"DE203","DE204","DE205",""}
+#define EWRK3_STRLEN 8
+#endif
+
+#ifndef EWRK3_RAM_BASE_ADDRESSES
+#define EWRK3_RAM_BASE_ADDRESSES {0xc0000,0xd0000,0x00000}
+#endif
+
+/*
+ ** Sets up the I/O area for the autoprobe.
+ */
+#define EWRK3_IO_BASE 0x100 /* Start address for probe search */
+#define EWRK3_IOP_INC 0x20 /* I/O address increment */
+#define EWRK3_TOTAL_SIZE 0x20 /* required I/O address length */
+
+#ifndef MAX_NUM_EWRK3S
+#define MAX_NUM_EWRK3S 21
+#endif
+
+#ifndef EWRK3_EISA_IO_PORTS
+#define EWRK3_EISA_IO_PORTS 0x0c00 /* I/O port base address, slot 0 */
+#endif
+
+#ifndef MAX_EISA_SLOTS
+#define MAX_EISA_SLOTS 16
+#define EISA_SLOT_INC 0x1000
+#endif
+
+#define QUEUE_PKT_TIMEOUT (1*HZ) /* Jiffies */
+
+/*
+ ** EtherWORKS 3 shared memory window sizes
+ */
+#define IO_ONLY 0x00
+#define SHMEM_2K 0x800
+#define SHMEM_32K 0x8000
+#define SHMEM_64K 0x10000
+
+/*
+ ** EtherWORKS 3 IRQ ENABLE/DISABLE
+ */
+#define ENABLE_IRQs { \
+ icr |= lp->irq_mask;\
+ outb(icr, EWRK3_ICR); /* Enable the IRQs */\
+}
+
+#define DISABLE_IRQs { \
+ icr = inb(EWRK3_ICR);\
+ icr &= ~lp->irq_mask;\
+ outb(icr, EWRK3_ICR); /* Disable the IRQs */\
+}
+
+/*
+ ** EtherWORKS 3 START/STOP
+ */
+#define START_EWRK3 { \
+ csr = inb(EWRK3_CSR);\
+ csr &= ~(CSR_TXD|CSR_RXD);\
+ outb(csr, EWRK3_CSR); /* Enable the TX and/or RX */\
+}
+
+#define STOP_EWRK3 { \
+ csr = (CSR_TXD|CSR_RXD);\
+ outb(csr, EWRK3_CSR); /* Disable the TX and/or RX */\
+}
+
+/*
+ ** The EtherWORKS 3 private structure
+ */
+#define EWRK3_PKT_STAT_SZ 16
+#define EWRK3_PKT_BIN_SZ 128 /* Should be >=100 unless you
+ increase EWRK3_PKT_STAT_SZ */
+
+struct ewrk3_stats {
+ u32 bins[EWRK3_PKT_STAT_SZ];
+ u32 unicast;
+ u32 multicast;
+ u32 broadcast;
+ u32 excessive_collisions;
+ u32 tx_underruns;
+ u32 excessive_underruns;
+};
+
+struct ewrk3_private {
+ char adapter_name[80]; /* Name exported to /proc/ioports */
+ u_long shmem_base; /* Shared memory start address */
+ void __iomem *shmem;
+ u_long shmem_length; /* Shared memory window length */
+ struct net_device_stats stats; /* Public stats */
+ struct ewrk3_stats pktStats; /* Private stats counters */
+ u_char irq_mask; /* Adapter IRQ mask bits */
+ u_char mPage; /* Maximum 2kB Page number */
+ u_char lemac; /* Chip rev. level */
+ u_char hard_strapped; /* Don't allow a full open */
+ u_char txc; /* Transmit cut through */
+ void __iomem *mctbl; /* Pointer to the multicast table */
+ u_char led_mask; /* Used to reserve LED access for ethtool */
+ spinlock_t hw_lock;
+};
+
+/*
+ ** Force the EtherWORKS 3 card to be in 2kB MODE
+ */
+#define FORCE_2K_MODE { \
+ shmem_length = SHMEM_2K;\
+ outb(((mem_start - 0x80000) >> 11), EWRK3_MBR);\
+}
+
+/*
+ ** Public Functions
+ */
+static int ewrk3_open(struct net_device *dev);
+static int ewrk3_queue_pkt(struct sk_buff *skb, struct net_device *dev);
+static irqreturn_t ewrk3_interrupt(int irq, void *dev_id, struct pt_regs *regs);
+static int ewrk3_close(struct net_device *dev);
+static struct net_device_stats *ewrk3_get_stats(struct net_device *dev);
+static void set_multicast_list(struct net_device *dev);
+static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static struct ethtool_ops ethtool_ops_203;
+static struct ethtool_ops ethtool_ops;
+
+/*
+ ** Private functions
+ */
+static int ewrk3_hw_init(struct net_device *dev, u_long iobase);
+static void ewrk3_init(struct net_device *dev);
+static int ewrk3_rx(struct net_device *dev);
+static int ewrk3_tx(struct net_device *dev);
+static void ewrk3_timeout(struct net_device *dev);
+
+static void EthwrkSignature(char *name, char *eeprom_image);
+static int DevicePresent(u_long iobase);
+static void SetMulticastFilter(struct net_device *dev);
+static int EISA_signature(char *name, s32 eisa_id);
+
+static int Read_EEPROM(u_long iobase, u_char eaddr);
+static int Write_EEPROM(short data, u_long iobase, u_char eaddr);
+static u_char get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType);
+
+static int ewrk3_probe1(struct net_device *dev, u_long iobase, int irq);
+static int isa_probe(struct net_device *dev, u_long iobase);
+static int eisa_probe(struct net_device *dev, u_long iobase);
+
+static u_char irq[MAX_NUM_EWRK3S+1] = {5, 0, 10, 3, 11, 9, 15, 12};
+
+static char name[EWRK3_STRLEN + 1];
+static int num_ewrks3s;
+
+/*
+ ** Miscellaneous defines...
+ */
+#define INIT_EWRK3 {\
+ outb(EEPROM_INIT, EWRK3_IOPR);\
+ mdelay(1);\
+}
+
+#ifndef MODULE
+struct net_device * __init ewrk3_probe(int unit)
+{
+ struct net_device *dev = alloc_etherdev(sizeof(struct ewrk3_private));
+ int err;
+
+ if (!dev)
+ return ERR_PTR(-ENOMEM);
+
+ if (unit >= 0) {
+ sprintf(dev->name, "eth%d", unit);
+ netdev_boot_setup_check(dev);
+ }
+ SET_MODULE_OWNER(dev);
+
+ err = ewrk3_probe1(dev, dev->base_addr, dev->irq);
+ if (err)
+ goto out;
+ return dev;
+out:
+ free_netdev(dev);
+ return ERR_PTR(err);
+
+}
+#endif
+
+static int __init ewrk3_probe1(struct net_device *dev, u_long iobase, int irq)
+{
+ int err;
+
+ dev->base_addr = iobase;
+ dev->irq = irq;
+
+ /* Address PROM pattern */
+ err = isa_probe(dev, iobase);
+ if (err != 0)
+ err = eisa_probe(dev, iobase);
+
+ if (err)
+ return err;
+
+ err = register_netdev(dev);
+ if (err)
+ release_region(dev->base_addr, EWRK3_TOTAL_SIZE);
+
+ return err;
+}
+
+static int __init
+ewrk3_hw_init(struct net_device *dev, u_long iobase)
+{
+ struct ewrk3_private *lp;
+ int i, status = 0;
+ u_long mem_start, shmem_length;
+ u_char cr, cmr, icr, nicsr, lemac, hard_strapped = 0;
+ u_char eeprom_image[EEPROM_MAX], chksum, eisa_cr = 0;
+
+ /*
+ ** Stop the EWRK3. Enable the DBR ROM. Disable interrupts and remote boot.
+ ** This also disables the EISA_ENABLE bit in the EISA Control Register.
+ */
+ if (iobase > 0x400)
+ eisa_cr = inb(EISA_CR);
+ INIT_EWRK3;
+
+ nicsr = inb(EWRK3_CSR);
+
+ icr = inb(EWRK3_ICR);
+ icr &= 0x70;
+ outb(icr, EWRK3_ICR); /* Disable all the IRQs */
+
+ if (nicsr == (CSR_TXD | CSR_RXD))
+ return -ENXIO;
+
+
+ /* Check that the EEPROM is alive and well and not living on Pluto... */
+ for (chksum = 0, i = 0; i < EEPROM_MAX; i += 2) {
+ union {
+ short val;
+ char c[2];
+ } tmp;
+
+ tmp.val = (short) Read_EEPROM(iobase, (i >> 1));
+ eeprom_image[i] = tmp.c[0];
+ eeprom_image[i + 1] = tmp.c[1];
+ chksum += eeprom_image[i] + eeprom_image[i + 1];
+ }
+
+ if (chksum != 0) { /* Bad EEPROM Data! */
+ printk("%s: Device has a bad on-board EEPROM.\n", dev->name);
+ return -ENXIO;
+ }
+
+ EthwrkSignature(name, eeprom_image);
+ if (*name == '\0')
+ return -ENXIO;
+
+ dev->base_addr = iobase;
+
+ if (iobase > 0x400) {
+ outb(eisa_cr, EISA_CR); /* Rewrite the EISA CR */
+ }
+ lemac = eeprom_image[EEPROM_CHIPVER];
+ cmr = inb(EWRK3_CMR);
+
+ if (((lemac == LeMAC) && ((cmr & CMR_NO_EEPROM) != CMR_NO_EEPROM)) ||
+ ((lemac == LeMAC2) && !(cmr & CMR_HS))) {
+ printk("%s: %s at %#4lx", dev->name, name, iobase);
+ hard_strapped = 1;
+ } else if ((iobase & 0x0fff) == EWRK3_EISA_IO_PORTS) {
+ /* EISA slot address */
+ printk("%s: %s at %#4lx (EISA slot %ld)",
+ dev->name, name, iobase, ((iobase >> 12) & 0x0f));
+ } else { /* ISA port address */
+ printk("%s: %s at %#4lx", dev->name, name, iobase);
+ }
+
+ printk(", h/w address ");
+ if (lemac != LeMAC2)
+ DevicePresent(iobase); /* need after EWRK3_INIT */
+ status = get_hw_addr(dev, eeprom_image, lemac);
+ for (i = 0; i < ETH_ALEN - 1; i++) { /* get the ethernet addr. */
+ printk("%2.2x:", dev->dev_addr[i]);
+ }
+ printk("%2.2x,\n", dev->dev_addr[i]);
+
+ if (status) {
+ printk(" which has an EEPROM CRC error.\n");
+ return -ENXIO;
+ }
+
+ if (lemac == LeMAC2) { /* Special LeMAC2 CMR things */
+ cmr &= ~(CMR_RA | CMR_WB | CMR_LINK | CMR_POLARITY | CMR_0WS);
+ if (eeprom_image[EEPROM_MISC0] & READ_AHEAD)
+ cmr |= CMR_RA;
+ if (eeprom_image[EEPROM_MISC0] & WRITE_BEHIND)
+ cmr |= CMR_WB;
+ if (eeprom_image[EEPROM_NETMAN0] & NETMAN_POL)
+ cmr |= CMR_POLARITY;
+ if (eeprom_image[EEPROM_NETMAN0] & NETMAN_LINK)
+ cmr |= CMR_LINK;
+ if (eeprom_image[EEPROM_MISC0] & _0WS_ENA)
+ cmr |= CMR_0WS;
+ }
+ if (eeprom_image[EEPROM_SETUP] & SETUP_DRAM)
+ cmr |= CMR_DRAM;
+ outb(cmr, EWRK3_CMR);
+
+ cr = inb(EWRK3_CR); /* Set up the Control Register */
+ cr |= eeprom_image[EEPROM_SETUP] & SETUP_APD;
+ if (cr & SETUP_APD)
+ cr |= eeprom_image[EEPROM_SETUP] & SETUP_PS;
+ cr |= eeprom_image[EEPROM_MISC0] & FAST_BUS;
+ cr |= eeprom_image[EEPROM_MISC0] & ENA_16;
+ outb(cr, EWRK3_CR);
+
+ /*
+ ** Determine the base address and window length for the EWRK3
+ ** RAM from the memory base register.
+ */
+ mem_start = inb(EWRK3_MBR);
+ shmem_length = 0;
+ if (mem_start != 0) {
+ if ((mem_start >= 0x0a) && (mem_start <= 0x0f)) {
+ mem_start *= SHMEM_64K;
+ shmem_length = SHMEM_64K;
+ } else if ((mem_start >= 0x14) && (mem_start <= 0x1f)) {
+ mem_start *= SHMEM_32K;
+ shmem_length = SHMEM_32K;
+ } else if ((mem_start >= 0x40) && (mem_start <= 0xff)) {
+ mem_start = mem_start * SHMEM_2K + 0x80000;
+ shmem_length = SHMEM_2K;
+ } else {
+ return -ENXIO;
+ }
+ }
+ /*
+ ** See the top of this source code for comments about
+ ** uncommenting this line.
+ */
+/* FORCE_2K_MODE; */
+
+ if (hard_strapped) {
+ printk(" is hard strapped.\n");
+ } else if (mem_start) {
+ printk(" has a %dk RAM window", (int) (shmem_length >> 10));
+ printk(" at 0x%.5lx", mem_start);
+ } else {
+ printk(" is in I/O only mode");
+ }
+
+ lp = netdev_priv(dev);
+ lp->shmem_base = mem_start;
+ lp->shmem = ioremap(mem_start, shmem_length);
+ if (!lp->shmem)
+ return -ENOMEM;
+ lp->shmem_length = shmem_length;
+ lp->lemac = lemac;
+ lp->hard_strapped = hard_strapped;
+ lp->led_mask = CR_LED;
+ spin_lock_init(&lp->hw_lock);
+
+ lp->mPage = 64;
+ if (cmr & CMR_DRAM)
+ lp->mPage <<= 1; /* 2 DRAMS on module */
+
+ sprintf(lp->adapter_name, "%s (%s)", name, dev->name);
+
+ lp->irq_mask = ICR_TNEM | ICR_TXDM | ICR_RNEM | ICR_RXDM;
+
+ if (!hard_strapped) {
+ /*
+ ** Enable EWRK3 board interrupts for autoprobing
+ */
+ icr |= ICR_IE; /* Enable interrupts */
+ outb(icr, EWRK3_ICR);
+
+ /* The DMA channel may be passed in on this parameter. */
+ dev->dma = 0;
+
+ /* To auto-IRQ we enable the initialization-done and DMA err,
+ interrupts. For now we will always get a DMA error. */
+ if (dev->irq < 2) {
+#ifndef MODULE
+ u_char irqnum;
+ unsigned long irq_mask;
+
+
+ irq_mask = probe_irq_on();
+
+ /*
+ ** Trigger a TNE interrupt.
+ */
+ icr |= ICR_TNEM;
+ outb(1, EWRK3_TDQ); /* Write to the TX done queue */
+ outb(icr, EWRK3_ICR); /* Unmask the TXD interrupt */
+
+ irqnum = irq[((icr & IRQ_SEL) >> 4)];
+
+ mdelay(20);
+ dev->irq = probe_irq_off(irq_mask);
+ if ((dev->irq) && (irqnum == dev->irq)) {
+ printk(" and uses IRQ%d.\n", dev->irq);
+ } else {
+ if (!dev->irq) {
+ printk(" and failed to detect IRQ line.\n");
+ } else if ((irqnum == 1) && (lemac == LeMAC2)) {
+ printk(" and an illegal IRQ line detected.\n");
+ } else {
+ printk(", but incorrect IRQ line detected.\n");
+ }
+ iounmap(lp->shmem);
+ return -ENXIO;
+ }
+
+ DISABLE_IRQs; /* Mask all interrupts */
+
+#endif /* MODULE */
+ } else {
+ printk(" and requires IRQ%d.\n", dev->irq);
+ }
+ }
+
+ if (ewrk3_debug > 1) {
+ printk(version);
+ }
+ /* The EWRK3-specific entries in the device structure. */
+ dev->open = ewrk3_open;
+ dev->hard_start_xmit = ewrk3_queue_pkt;
+ dev->stop = ewrk3_close;
+ dev->get_stats = ewrk3_get_stats;
+ dev->set_multicast_list = set_multicast_list;
+ dev->do_ioctl = ewrk3_ioctl;
+ if (lp->adapter_name[4] == '3')
+ SET_ETHTOOL_OPS(dev, &ethtool_ops_203);
+ else
+ SET_ETHTOOL_OPS(dev, &ethtool_ops);
+ dev->tx_timeout = ewrk3_timeout;
+ dev->watchdog_timeo = QUEUE_PKT_TIMEOUT;
+
+ dev->mem_start = 0;
+
+ return 0;
+}
+
+
+static int ewrk3_open(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int i, status = 0;
+ u_char icr, csr;
+
+ /*
+ ** Stop the TX and RX...
+ */
+ STOP_EWRK3;
+
+ if (!lp->hard_strapped) {
+ if (request_irq(dev->irq, (void *) ewrk3_interrupt, 0, "ewrk3", dev)) {
+ printk("ewrk3_open(): Requested IRQ%d is busy\n", dev->irq);
+ status = -EAGAIN;
+ } else {
+
+ /*
+ ** Re-initialize the EWRK3...
+ */
+ ewrk3_init(dev);
+
+ if (ewrk3_debug > 1) {
+ printk("%s: ewrk3 open with irq %d\n", dev->name, dev->irq);
+ printk(" physical address: ");
+ for (i = 0; i < 5; i++) {
+ printk("%2.2x:", (u_char) dev->dev_addr[i]);
+ }
+ printk("%2.2x\n", (u_char) dev->dev_addr[i]);
+ if (lp->shmem_length == 0) {
+ printk(" no shared memory, I/O only mode\n");
+ } else {
+ printk(" start of shared memory: 0x%08lx\n", lp->shmem_base);
+ printk(" window length: 0x%04lx\n", lp->shmem_length);
+ }
+ printk(" # of DRAMS: %d\n", ((inb(EWRK3_CMR) & 0x02) ? 2 : 1));
+ printk(" csr: 0x%02x\n", inb(EWRK3_CSR));
+ printk(" cr: 0x%02x\n", inb(EWRK3_CR));
+ printk(" icr: 0x%02x\n", inb(EWRK3_ICR));
+ printk(" cmr: 0x%02x\n", inb(EWRK3_CMR));
+ printk(" fmqc: 0x%02x\n", inb(EWRK3_FMQC));
+ }
+ netif_start_queue(dev);
+ /*
+ ** Unmask EWRK3 board interrupts
+ */
+ icr = inb(EWRK3_ICR);
+ ENABLE_IRQs;
+
+ }
+ } else {
+ printk(KERN_ERR "%s: ewrk3 available for hard strapped set up only.\n", dev->name);
+ printk(KERN_ERR " Run the 'ewrk3setup' utility or remove the hard straps.\n");
+ return -EINVAL;
+ }
+
+ return status;
+}
+
+/*
+ ** Initialize the EtherWORKS 3 operating conditions
+ */
+static void ewrk3_init(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_char csr, page;
+ u_long iobase = dev->base_addr;
+ int i;
+
+ /*
+ ** Enable any multicasts
+ */
+ set_multicast_list(dev);
+
+ /*
+ ** Set hardware MAC address. Address is initialized from the EEPROM
+ ** during startup but may have since been changed by the user.
+ */
+ for (i=0; i<ETH_ALEN; i++)
+ outb(dev->dev_addr[i], EWRK3_PAR0 + i);
+
+ /*
+ ** Clean out any remaining entries in all the queues here
+ */
+ while (inb(EWRK3_TQ));
+ while (inb(EWRK3_TDQ));
+ while (inb(EWRK3_RQ));
+ while (inb(EWRK3_FMQ));
+
+ /*
+ ** Write a clean free memory queue
+ */
+ for (page = 1; page < lp->mPage; page++) { /* Write the free page numbers */
+ outb(page, EWRK3_FMQ); /* to the Free Memory Queue */
+ }
+
+ START_EWRK3; /* Enable the TX and/or RX */
+}
+
+/*
+ * Transmit timeout
+ */
+
+static void ewrk3_timeout(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_char icr, csr;
+ u_long iobase = dev->base_addr;
+
+ if (!lp->hard_strapped)
+ {
+ printk(KERN_WARNING"%s: transmit timed/locked out, status %04x, resetting.\n",
+ dev->name, inb(EWRK3_CSR));
+
+ /*
+ ** Mask all board interrupts
+ */
+ DISABLE_IRQs;
+
+ /*
+ ** Stop the TX and RX...
+ */
+ STOP_EWRK3;
+
+ ewrk3_init(dev);
+
+ /*
+ ** Unmask EWRK3 board interrupts
+ */
+ ENABLE_IRQs;
+
+ dev->trans_start = jiffies;
+ netif_wake_queue(dev);
+ }
+}
+
+/*
+ ** Writes a socket buffer to the free page queue
+ */
+static int ewrk3_queue_pkt (struct sk_buff *skb, struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ void __iomem *buf = NULL;
+ u_char icr;
+ u_char page;
+
+ spin_lock_irq (&lp->hw_lock);
+ DISABLE_IRQs;
+
+ /* if no resources available, exit, request packet be queued */
+ if (inb (EWRK3_FMQC) == 0) {
+ printk (KERN_WARNING "%s: ewrk3_queue_pkt(): No free resources...\n",
+ dev->name);
+ printk (KERN_WARNING "%s: ewrk3_queue_pkt(): CSR: %02x ICR: %02x FMQC: %02x\n",
+ dev->name, inb (EWRK3_CSR), inb (EWRK3_ICR),
+ inb (EWRK3_FMQC));
+ goto err_out;
+ }
+
+ /*
+ ** Get a free page from the FMQ
+ */
+ if ((page = inb (EWRK3_FMQ)) >= lp->mPage) {
+ printk ("ewrk3_queue_pkt(): Invalid free memory page (%d).\n",
+ (u_char) page);
+ goto err_out;
+ }
+
+
+ /*
+ ** Set up shared memory window and pointer into the window
+ */
+ if (lp->shmem_length == IO_ONLY) {
+ outb (page, EWRK3_IOPR);
+ } else if (lp->shmem_length == SHMEM_2K) {
+ buf = lp->shmem;
+ outb (page, EWRK3_MPR);
+ } else if (lp->shmem_length == SHMEM_32K) {
+ buf = (((short) page << 11) & 0x7800) + lp->shmem;
+ outb ((page >> 4), EWRK3_MPR);
+ } else if (lp->shmem_length == SHMEM_64K) {
+ buf = (((short) page << 11) & 0xf800) + lp->shmem;
+ outb ((page >> 5), EWRK3_MPR);
+ } else {
+ printk (KERN_ERR "%s: Oops - your private data area is hosed!\n",
+ dev->name);
+ BUG ();
+ }
+
+ /*
+ ** Set up the buffer control structures and copy the data from
+ ** the socket buffer to the shared memory .
+ */
+ if (lp->shmem_length == IO_ONLY) {
+ int i;
+ u_char *p = skb->data;
+ outb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), EWRK3_DATA);
+ outb ((char) (skb->len & 0xff), EWRK3_DATA);
+ outb ((char) ((skb->len >> 8) & 0xff), EWRK3_DATA);
+ outb ((char) 0x04, EWRK3_DATA);
+ for (i = 0; i < skb->len; i++) {
+ outb (*p++, EWRK3_DATA);
+ }
+ outb (page, EWRK3_TQ); /* Start sending pkt */
+ } else {
+ writeb ((char) (TCR_QMODE | TCR_PAD | TCR_IFC), buf); /* ctrl byte */
+ buf += 1;
+ writeb ((char) (skb->len & 0xff), buf); /* length (16 bit xfer) */
+ buf += 1;
+ if (lp->txc) {
+ writeb(((skb->len >> 8) & 0xff) | XCT, buf);
+ buf += 1;
+ writeb (0x04, buf); /* index byte */
+ buf += 1;
+ writeb (0x00, (buf + skb->len)); /* Write the XCT flag */
+ memcpy_toio (buf, skb->data, PRELOAD); /* Write PRELOAD bytes */
+ outb (page, EWRK3_TQ); /* Start sending pkt */
+ memcpy_toio (buf + PRELOAD,
+ skb->data + PRELOAD,
+ skb->len - PRELOAD);
+ writeb (0xff, (buf + skb->len)); /* Write the XCT flag */
+ } else {
+ writeb ((skb->len >> 8) & 0xff, buf);
+ buf += 1;
+ writeb (0x04, buf); /* index byte */
+ buf += 1;
+ memcpy_toio (buf, skb->data, skb->len); /* Write data bytes */
+ outb (page, EWRK3_TQ); /* Start sending pkt */
+ }
+ }
+
+ ENABLE_IRQs;
+ spin_unlock_irq (&lp->hw_lock);
+
+ lp->stats.tx_bytes += skb->len;
+ dev->trans_start = jiffies;
+ dev_kfree_skb (skb);
+
+ /* Check for free resources: stop Tx queue if there are none */
+ if (inb (EWRK3_FMQC) == 0)
+ netif_stop_queue (dev);
+
+ return 0;
+
+err_out:
+ ENABLE_IRQs;
+ spin_unlock_irq (&lp->hw_lock);
+ return 1;
+}
+
+/*
+ ** The EWRK3 interrupt handler.
+ */
+static irqreturn_t ewrk3_interrupt(int irq, void *dev_id, struct pt_regs *regs)
+{
+ struct net_device *dev = dev_id;
+ struct ewrk3_private *lp;
+ u_long iobase;
+ u_char icr, cr, csr;
+
+ lp = netdev_priv(dev);
+ iobase = dev->base_addr;
+
+ /* get the interrupt information */
+ csr = inb(EWRK3_CSR);
+
+ /*
+ ** Mask the EWRK3 board interrupts and turn on the LED
+ */
+ spin_lock(&lp->hw_lock);
+ DISABLE_IRQs;
+
+ cr = inb(EWRK3_CR);
+ cr |= lp->led_mask;
+ outb(cr, EWRK3_CR);
+
+ if (csr & CSR_RNE) /* Rx interrupt (packet[s] arrived) */
+ ewrk3_rx(dev);
+
+ if (csr & CSR_TNE) /* Tx interrupt (packet sent) */
+ ewrk3_tx(dev);
+
+ /*
+ ** Now deal with the TX/RX disable flags. These are set when there
+ ** are no more resources. If resources free up then enable these
+ ** interrupts, otherwise mask them - failure to do this will result
+ ** in the system hanging in an interrupt loop.
+ */
+ if (inb(EWRK3_FMQC)) { /* any resources available? */
+ lp->irq_mask |= ICR_TXDM | ICR_RXDM; /* enable the interrupt source */
+ csr &= ~(CSR_TXD | CSR_RXD); /* ensure restart of a stalled TX or RX */
+ outb(csr, EWRK3_CSR);
+ netif_wake_queue(dev);
+ } else {
+ lp->irq_mask &= ~(ICR_TXDM | ICR_RXDM); /* disable the interrupt source */
+ }
+
+ /* Unmask the EWRK3 board interrupts and turn off the LED */
+ cr &= ~(lp->led_mask);
+ outb(cr, EWRK3_CR);
+ ENABLE_IRQs;
+ spin_unlock(&lp->hw_lock);
+ return IRQ_HANDLED;
+}
+
+/* Called with lp->hw_lock held */
+static int ewrk3_rx(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ int i, status = 0;
+ u_char page;
+ void __iomem *buf = NULL;
+
+ while (inb(EWRK3_RQC) && !status) { /* Whilst there's incoming data */
+ if ((page = inb(EWRK3_RQ)) < lp->mPage) { /* Get next entry's buffer page */
+ /*
+ ** Set up shared memory window and pointer into the window
+ */
+ if (lp->shmem_length == IO_ONLY) {
+ outb(page, EWRK3_IOPR);
+ } else if (lp->shmem_length == SHMEM_2K) {
+ buf = lp->shmem;
+ outb(page, EWRK3_MPR);
+ } else if (lp->shmem_length == SHMEM_32K) {
+ buf = (((short) page << 11) & 0x7800) + lp->shmem;
+ outb((page >> 4), EWRK3_MPR);
+ } else if (lp->shmem_length == SHMEM_64K) {
+ buf = (((short) page << 11) & 0xf800) + lp->shmem;
+ outb((page >> 5), EWRK3_MPR);
+ } else {
+ status = -1;
+ printk("%s: Oops - your private data area is hosed!\n", dev->name);
+ }
+
+ if (!status) {
+ char rx_status;
+ int pkt_len;
+
+ if (lp->shmem_length == IO_ONLY) {
+ rx_status = inb(EWRK3_DATA);
+ pkt_len = inb(EWRK3_DATA);
+ pkt_len |= ((u_short) inb(EWRK3_DATA) << 8);
+ } else {
+ rx_status = readb(buf);
+ buf += 1;
+ pkt_len = readw(buf);
+ buf += 3;
+ }
+
+ if (!(rx_status & R_ROK)) { /* There was an error. */
+ lp->stats.rx_errors++; /* Update the error stats. */
+ if (rx_status & R_DBE)
+ lp->stats.rx_frame_errors++;
+ if (rx_status & R_CRC)
+ lp->stats.rx_crc_errors++;
+ if (rx_status & R_PLL)
+ lp->stats.rx_fifo_errors++;
+ } else {
+ struct sk_buff *skb;
+
+ if ((skb = dev_alloc_skb(pkt_len + 2)) != NULL) {
+ unsigned char *p;
+ skb->dev = dev;
+ skb_reserve(skb, 2); /* Align to 16 bytes */
+ p = skb_put(skb, pkt_len);
+
+ if (lp->shmem_length == IO_ONLY) {
+ *p = inb(EWRK3_DATA); /* dummy read */
+ for (i = 0; i < pkt_len; i++) {
+ *p++ = inb(EWRK3_DATA);
+ }
+ } else {
+ memcpy_fromio(p, buf, pkt_len);
+ }
+
+ for (i = 1; i < EWRK3_PKT_STAT_SZ - 1; i++) {
+ if (pkt_len < i * EWRK3_PKT_BIN_SZ) {
+ lp->pktStats.bins[i]++;
+ i = EWRK3_PKT_STAT_SZ;
+ }
+ }
+ p = skb->data; /* Look at the dest addr */
+ if (p[0] & 0x01) { /* Multicast/Broadcast */
+ if ((*(s16 *) & p[0] == -1) && (*(s16 *) & p[2] == -1) && (*(s16 *) & p[4] == -1)) {
+ lp->pktStats.broadcast++;
+ } else {
+ lp->pktStats.multicast++;
+ }
+ } else if ((*(s16 *) & p[0] == *(s16 *) & dev->dev_addr[0]) &&
+ (*(s16 *) & p[2] == *(s16 *) & dev->dev_addr[2]) &&
+ (*(s16 *) & p[4] == *(s16 *) & dev->dev_addr[4])) {
+ lp->pktStats.unicast++;
+ }
+ lp->pktStats.bins[0]++; /* Duplicates stats.rx_packets */
+ if (lp->pktStats.bins[0] == 0) { /* Reset counters */
+ memset(&lp->pktStats, 0, sizeof(lp->pktStats));
+ }
+ /*
+ ** Notify the upper protocol layers that there is another
+ ** packet to handle
+ */
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+
+ /*
+ ** Update stats
+ */
+ dev->last_rx = jiffies;
+ lp->stats.rx_packets++;
+ lp->stats.rx_bytes += pkt_len;
+ } else {
+ printk("%s: Insufficient memory; nuking packet.\n", dev->name);
+ lp->stats.rx_dropped++; /* Really, deferred. */
+ break;
+ }
+ }
+ }
+ /*
+ ** Return the received buffer to the free memory queue
+ */
+ outb(page, EWRK3_FMQ);
+ } else {
+ printk("ewrk3_rx(): Illegal page number, page %d\n", page);
+ printk("ewrk3_rx(): CSR: %02x ICR: %02x FMQC: %02x\n", inb(EWRK3_CSR), inb(EWRK3_ICR), inb(EWRK3_FMQC));
+ }
+ }
+ return status;
+}
+
+/*
+** Buffer sent - check for TX buffer errors.
+** Called with lp->hw_lock held
+*/
+static int ewrk3_tx(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ u_char tx_status;
+
+ while ((tx_status = inb(EWRK3_TDQ)) > 0) { /* Whilst there's old buffers */
+ if (tx_status & T_VSTS) { /* The status is valid */
+ if (tx_status & T_TXE) {
+ lp->stats.tx_errors++;
+ if (tx_status & T_NCL)
+ lp->stats.tx_carrier_errors++;
+ if (tx_status & T_LCL)
+ lp->stats.tx_window_errors++;
+ if (tx_status & T_CTU) {
+ if ((tx_status & T_COLL) ^ T_XUR) {
+ lp->pktStats.tx_underruns++;
+ } else {
+ lp->pktStats.excessive_underruns++;
+ }
+ } else if (tx_status & T_COLL) {
+ if ((tx_status & T_COLL) ^ T_XCOLL) {
+ lp->stats.collisions++;
+ } else {
+ lp->pktStats.excessive_collisions++;
+ }
+ }
+ } else {
+ lp->stats.tx_packets++;
+ }
+ }
+ }
+
+ return 0;
+}
+
+static int ewrk3_close(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ u_char icr, csr;
+
+ netif_stop_queue(dev);
+
+ if (ewrk3_debug > 1) {
+ printk("%s: Shutting down ethercard, status was %2.2x.\n",
+ dev->name, inb(EWRK3_CSR));
+ }
+ /*
+ ** We stop the EWRK3 here... mask interrupts and stop TX & RX
+ */
+ DISABLE_IRQs;
+
+ STOP_EWRK3;
+
+ /*
+ ** Clean out the TX and RX queues here (note that one entry
+ ** may get added to either the TXD or RX queues if the TX or RX
+ ** just starts processing a packet before the STOP_EWRK3 command
+ ** is received. This will be flushed in the ewrk3_open() call).
+ */
+ while (inb(EWRK3_TQ));
+ while (inb(EWRK3_TDQ));
+ while (inb(EWRK3_RQ));
+
+ if (!lp->hard_strapped) {
+ free_irq(dev->irq, dev);
+ }
+ return 0;
+}
+
+static struct net_device_stats *ewrk3_get_stats(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+
+ /* Null body since there is no framing error counter */
+ return &lp->stats;
+}
+
+/*
+ ** Set or clear the multicast filter for this adapter.
+ */
+static void set_multicast_list(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ u_long iobase = dev->base_addr;
+ u_char csr;
+
+ csr = inb(EWRK3_CSR);
+
+ if (lp->shmem_length == IO_ONLY) {
+ lp->mctbl = NULL;
+ } else {
+ lp->mctbl = lp->shmem + PAGE0_HTE;
+ }
+
+ csr &= ~(CSR_PME | CSR_MCE);
+ if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
+ csr |= CSR_PME;
+ outb(csr, EWRK3_CSR);
+ } else {
+ SetMulticastFilter(dev);
+ csr |= CSR_MCE;
+ outb(csr, EWRK3_CSR);
+ }
+}
+
+/*
+ ** Calculate the hash code and update the logical address filter
+ ** from a list of ethernet multicast addresses.
+ ** Little endian crc one liner from Matt Thomas, DEC.
+ **
+ ** Note that when clearing the table, the broadcast bit must remain asserted
+ ** to receive broadcast messages.
+ */
+static void SetMulticastFilter(struct net_device *dev)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ struct dev_mc_list *dmi = dev->mc_list;
+ u_long iobase = dev->base_addr;
+ int i;
+ char *addrs, bit, byte;
+ short __iomem *p = lp->mctbl;
+ u16 hashcode;
+ u32 crc;
+
+ spin_lock_irq(&lp->hw_lock);
+
+ if (lp->shmem_length == IO_ONLY) {
+ outb(0, EWRK3_IOPR);
+ outw(PAGE0_HTE, EWRK3_PIR1);
+ } else {
+ outb(0, EWRK3_MPR);
+ }
+
+ if (dev->flags & IFF_ALLMULTI) {
+ for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) {
+ if (lp->shmem_length == IO_ONLY) {
+ outb(0xff, EWRK3_DATA);
+ } else { /* memset didn't work here */
+ writew(0xffff, p);
+ p++;
+ i++;
+ }
+ }
+ } else {
+ /* Clear table except for broadcast bit */
+ if (lp->shmem_length == IO_ONLY) {
+ for (i = 0; i < (HASH_TABLE_LEN >> 4) - 1; i++) {
+ outb(0x00, EWRK3_DATA);
+ }
+ outb(0x80, EWRK3_DATA);
+ i++; /* insert the broadcast bit */
+ for (; i < (HASH_TABLE_LEN >> 3); i++) {
+ outb(0x00, EWRK3_DATA);
+ }
+ } else {
+ memset_io(lp->mctbl, 0, HASH_TABLE_LEN >> 3);
+ writeb(0x80, lp->mctbl + (HASH_TABLE_LEN >> 4) - 1);
+ }
+
+ /* Update table */
+ for (i = 0; i < dev->mc_count; i++) { /* for each address in the list */
+ addrs = dmi->dmi_addr;
+ dmi = dmi->next;
+ if ((*addrs & 0x01) == 1) { /* multicast address? */
+ crc = ether_crc_le(ETH_ALEN, addrs);
+ hashcode = crc & ((1 << 9) - 1); /* hashcode is 9 LSb of CRC */
+
+ byte = hashcode >> 3; /* bit[3-8] -> byte in filter */
+ bit = 1 << (hashcode & 0x07); /* bit[0-2] -> bit in byte */
+
+ if (lp->shmem_length == IO_ONLY) {
+ u_char tmp;
+
+ outw(PAGE0_HTE + byte, EWRK3_PIR1);
+ tmp = inb(EWRK3_DATA);
+ tmp |= bit;
+ outw(PAGE0_HTE + byte, EWRK3_PIR1);
+ outb(tmp, EWRK3_DATA);
+ } else {
+ writeb(readb(lp->mctbl + byte) | bit, lp->mctbl + byte);
+ }
+ }
+ }
+ }
+
+ spin_unlock_irq(&lp->hw_lock);
+}
+
+/*
+ ** ISA bus I/O device probe
+ */
+static int __init isa_probe(struct net_device *dev, u_long ioaddr)
+{
+ int i = num_ewrks3s, maxSlots;
+ int ret = -ENODEV;
+
+ u_long iobase;
+
+ if (ioaddr >= 0x400)
+ goto out;
+
+ if (ioaddr == 0) { /* Autoprobing */
+ iobase = EWRK3_IO_BASE; /* Get the first slot address */
+ maxSlots = 24;
+ } else { /* Probe a specific location */
+ iobase = ioaddr;
+ maxSlots = i + 1;
+ }
+
+ for (; (i < maxSlots) && (dev != NULL);
+ iobase += EWRK3_IOP_INC, i++)
+ {
+ if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME)) {
+ if (DevicePresent(iobase) == 0) {
+ int irq = dev->irq;
+ ret = ewrk3_hw_init(dev, iobase);
+ if (!ret)
+ break;
+ dev->irq = irq;
+ }
+ release_region(iobase, EWRK3_TOTAL_SIZE);
+ }
+ }
+ out:
+
+ return ret;
+}
+
+/*
+ ** EISA bus I/O device probe. Probe from slot 1 since slot 0 is usually
+ ** the motherboard.
+ */
+static int __init eisa_probe(struct net_device *dev, u_long ioaddr)
+{
+ int i, maxSlots;
+ u_long iobase;
+ int ret = -ENODEV;
+
+ if (ioaddr < 0x1000)
+ goto out;
+
+ if (ioaddr == 0) { /* Autoprobing */
+ iobase = EISA_SLOT_INC; /* Get the first slot address */
+ i = 1;
+ maxSlots = MAX_EISA_SLOTS;
+ } else { /* Probe a specific location */
+ iobase = ioaddr;
+ i = (ioaddr >> 12);
+ maxSlots = i + 1;
+ }
+
+ for (i = 1; (i < maxSlots) && (dev != NULL); i++, iobase += EISA_SLOT_INC) {
+ if (EISA_signature(name, EISA_ID) == 0) {
+ if (request_region(iobase, EWRK3_TOTAL_SIZE, DRV_NAME) &&
+ DevicePresent(iobase) == 0) {
+ int irq = dev->irq;
+ ret = ewrk3_hw_init(dev, iobase);
+ if (!ret)
+ break;
+ dev->irq = irq;
+ }
+ release_region(iobase, EWRK3_TOTAL_SIZE);
+ }
+ }
+
+ out:
+ return ret;
+}
+
+
+/*
+ ** Read the EWRK3 EEPROM using this routine
+ */
+static int Read_EEPROM(u_long iobase, u_char eaddr)
+{
+ int i;
+
+ outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */
+ outb(EEPROM_RD, EWRK3_IOPR); /* issue read command */
+ for (i = 0; i < 5000; i++)
+ inb(EWRK3_CSR); /* wait 1msec */
+
+ return inw(EWRK3_EPROM1); /* 16 bits data return */
+}
+
+/*
+ ** Write the EWRK3 EEPROM using this routine
+ */
+static int Write_EEPROM(short data, u_long iobase, u_char eaddr)
+{
+ int i;
+
+ outb(EEPROM_WR_EN, EWRK3_IOPR); /* issue write enable command */
+ for (i = 0; i < 5000; i++)
+ inb(EWRK3_CSR); /* wait 1msec */
+ outw(data, EWRK3_EPROM1); /* write data to register */
+ outb((eaddr & 0x3f), EWRK3_PIR1); /* set up 6 bits of address info */
+ outb(EEPROM_WR, EWRK3_IOPR); /* issue write command */
+ for (i = 0; i < 75000; i++)
+ inb(EWRK3_CSR); /* wait 15msec */
+ outb(EEPROM_WR_DIS, EWRK3_IOPR); /* issue write disable command */
+ for (i = 0; i < 5000; i++)
+ inb(EWRK3_CSR); /* wait 1msec */
+
+ return 0;
+}
+
+/*
+ ** Look for a particular board name in the on-board EEPROM.
+ */
+static void __init EthwrkSignature(char *name, char *eeprom_image)
+{
+ int i;
+ char *signatures[] = EWRK3_SIGNATURE;
+
+ for (i=0; *signatures[i] != '\0'; i++)
+ if( !strncmp(eeprom_image+EEPROM_PNAME7, signatures[i], strlen(signatures[i])) )
+ break;
+
+ if (*signatures[i] != '\0') {
+ memcpy(name, eeprom_image+EEPROM_PNAME7, EWRK3_STRLEN);
+ name[EWRK3_STRLEN] = '\0';
+ } else
+ name[0] = '\0';
+
+ return;
+}
+
+/*
+ ** Look for a special sequence in the Ethernet station address PROM that
+ ** is common across all EWRK3 products.
+ **
+ ** Search the Ethernet address ROM for the signature. Since the ROM address
+ ** counter can start at an arbitrary point, the search must include the entire
+ ** probe sequence length plus the (length_of_the_signature - 1).
+ ** Stop the search IMMEDIATELY after the signature is found so that the
+ ** PROM address counter is correctly positioned at the start of the
+ ** ethernet address for later read out.
+ */
+
+static int __init DevicePresent(u_long iobase)
+{
+ union {
+ struct {
+ u32 a;
+ u32 b;
+ } llsig;
+ char Sig[sizeof(u32) << 1];
+ }
+ dev;
+ short sigLength;
+ char data;
+ int i, j, status = 0;
+
+ dev.llsig.a = ETH_PROM_SIG;
+ dev.llsig.b = ETH_PROM_SIG;
+ sigLength = sizeof(u32) << 1;
+
+ for (i = 0, j = 0; j < sigLength && i < PROBE_LENGTH + sigLength - 1; i++) {
+ data = inb(EWRK3_APROM);
+ if (dev.Sig[j] == data) { /* track signature */
+ j++;
+ } else { /* lost signature; begin search again */
+ if (data == dev.Sig[0]) {
+ j = 1;
+ } else {
+ j = 0;
+ }
+ }
+ }
+
+ if (j != sigLength) {
+ status = -ENODEV; /* search failed */
+ }
+ return status;
+}
+
+static u_char __init get_hw_addr(struct net_device *dev, u_char * eeprom_image, char chipType)
+{
+ int i, j, k;
+ u_short chksum;
+ u_char crc, lfsr, sd, status = 0;
+ u_long iobase = dev->base_addr;
+ u16 tmp;
+
+ if (chipType == LeMAC2) {
+ for (crc = 0x6a, j = 0; j < ETH_ALEN; j++) {
+ sd = dev->dev_addr[j] = eeprom_image[EEPROM_PADDR0 + j];
+ outb(dev->dev_addr[j], EWRK3_PAR0 + j);
+ for (k = 0; k < 8; k++, sd >>= 1) {
+ lfsr = ((((crc & 0x02) >> 1) ^ (crc & 0x01)) ^ (sd & 0x01)) << 7;
+ crc = (crc >> 1) + lfsr;
+ }
+ }
+ if (crc != eeprom_image[EEPROM_PA_CRC])
+ status = -1;
+ } else {
+ for (i = 0, k = 0; i < ETH_ALEN;) {
+ k <<= 1;
+ if (k > 0xffff)
+ k -= 0xffff;
+
+ k += (u_char) (tmp = inb(EWRK3_APROM));
+ dev->dev_addr[i] = (u_char) tmp;
+ outb(dev->dev_addr[i], EWRK3_PAR0 + i);
+ i++;
+ k += (u_short) ((tmp = inb(EWRK3_APROM)) << 8);
+ dev->dev_addr[i] = (u_char) tmp;
+ outb(dev->dev_addr[i], EWRK3_PAR0 + i);
+ i++;
+
+ if (k > 0xffff)
+ k -= 0xffff;
+ }
+ if (k == 0xffff)
+ k = 0;
+ chksum = inb(EWRK3_APROM);
+ chksum |= (inb(EWRK3_APROM) << 8);
+ if (k != chksum)
+ status = -1;
+ }
+
+ return status;
+}
+
+/*
+ ** Look for a particular board name in the EISA configuration space
+ */
+static int __init EISA_signature(char *name, s32 eisa_id)
+{
+ u_long i;
+ char *signatures[] = EWRK3_SIGNATURE;
+ char ManCode[EWRK3_STRLEN];
+ union {
+ s32 ID;
+ char Id[4];
+ } Eisa;
+ int status = 0;
+
+ *name = '\0';
+ for (i = 0; i < 4; i++) {
+ Eisa.Id[i] = inb(eisa_id + i);
+ }
+
+ ManCode[0] = (((Eisa.Id[0] >> 2) & 0x1f) + 0x40);
+ ManCode[1] = (((Eisa.Id[1] & 0xe0) >> 5) + ((Eisa.Id[0] & 0x03) << 3) + 0x40);
+ ManCode[2] = (((Eisa.Id[2] >> 4) & 0x0f) + 0x30);
+ ManCode[3] = ((Eisa.Id[2] & 0x0f) + 0x30);
+ ManCode[4] = (((Eisa.Id[3] >> 4) & 0x0f) + 0x30);
+ ManCode[5] = '\0';
+
+ for (i = 0; (*signatures[i] != '\0') && (*name == '\0'); i++) {
+ if (strstr(ManCode, signatures[i]) != NULL) {
+ strcpy(name, ManCode);
+ status = 1;
+ }
+ }
+
+ return status; /* return the device name string */
+}
+
+static void ewrk3_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
+{
+ int fwrev = Read_EEPROM(dev->base_addr, EEPROM_REVLVL);
+
+ strcpy(info->driver, DRV_NAME);
+ strcpy(info->version, DRV_VERSION);
+ sprintf(info->fw_version, "%d", fwrev);
+ strcpy(info->bus_info, "N/A");
+ info->eedump_len = EEPROM_MAX;
+}
+
+static int ewrk3_get_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ unsigned long iobase = dev->base_addr;
+ u8 cr = inb(EWRK3_CR);
+
+ switch (lp->adapter_name[4]) {
+ case '3': /* DE203 */
+ ecmd->supported = SUPPORTED_BNC;
+ ecmd->port = PORT_BNC;
+ break;
+
+ case '4': /* DE204 */
+ ecmd->supported = SUPPORTED_TP;
+ ecmd->port = PORT_TP;
+ break;
+
+ case '5': /* DE205 */
+ ecmd->supported = SUPPORTED_TP | SUPPORTED_BNC | SUPPORTED_AUI;
+ ecmd->autoneg = !(cr & CR_APD);
+ /*
+ ** Port is only valid if autoneg is disabled
+ ** and even then we don't know if AUI is jumpered.
+ */
+ if (!ecmd->autoneg)
+ ecmd->port = (cr & CR_PSEL) ? PORT_BNC : PORT_TP;
+ break;
+ }
+
+ ecmd->supported |= SUPPORTED_10baseT_Half;
+ ecmd->speed = SPEED_10;
+ ecmd->duplex = DUPLEX_HALF;
+ return 0;
+}
+
+static int ewrk3_set_settings(struct net_device *dev, struct ethtool_cmd *ecmd)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ unsigned long iobase = dev->base_addr;
+ unsigned long flags;
+ u8 cr;
+
+ /* DE205 is the only card with anything to set */
+ if (lp->adapter_name[4] != '5')
+ return -EOPNOTSUPP;
+
+ /* Sanity-check parameters */
+ if (ecmd->speed != SPEED_10)
+ return -EINVAL;
+ if (ecmd->port != PORT_TP && ecmd->port != PORT_BNC)
+ return -EINVAL; /* AUI is not software-selectable */
+ if (ecmd->transceiver != XCVR_INTERNAL)
+ return -EINVAL;
+ if (ecmd->duplex != DUPLEX_HALF)
+ return -EINVAL;
+ if (ecmd->phy_address != 0)
+ return -EINVAL;
+
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ cr = inb(EWRK3_CR);
+
+ /* If Autoneg is set, change to Auto Port mode */
+ /* Otherwise, disable Auto Port and set port explicitly */
+ if (ecmd->autoneg) {
+ cr &= ~CR_APD;
+ } else {
+ cr |= CR_APD;
+ if (ecmd->port == PORT_TP)
+ cr &= ~CR_PSEL; /* Force TP */
+ else
+ cr |= CR_PSEL; /* Force BNC */
+ }
+
+ /* Commit the changes */
+ outb(cr, EWRK3_CR);
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ return 0;
+}
+
+static u32 ewrk3_get_link(struct net_device *dev)
+{
+ unsigned long iobase = dev->base_addr;
+ u8 cmr = inb(EWRK3_CMR);
+ /* DE203 has BNC only and link status does not apply */
+ /* On DE204 this is always valid since TP is the only port. */
+ /* On DE205 this reflects TP status even if BNC or AUI is selected. */
+ return !(cmr & CMR_LINK);
+}
+
+static int ewrk3_phys_id(struct net_device *dev, u32 data)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ unsigned long iobase = dev->base_addr;
+ unsigned long flags;
+ u8 cr;
+ int count;
+
+ /* Toggle LED 4x per second */
+ count = data << 2;
+
+ spin_lock_irqsave(&lp->hw_lock, flags);
+
+ /* Bail if a PHYS_ID is already in progress */
+ if (lp->led_mask == 0) {
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ return -EBUSY;
+ }
+
+ /* Prevent ISR from twiddling the LED */
+ lp->led_mask = 0;
+
+ while (count--) {
+ /* Toggle the LED */
+ cr = inb(EWRK3_CR);
+ outb(cr ^ CR_LED, EWRK3_CR);
+
+ /* Wait a little while */
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ msleep(250);
+ spin_lock_irqsave(&lp->hw_lock, flags);
+
+ /* Exit if we got a signal */
+ if (signal_pending(current))
+ break;
+ }
+
+ lp->led_mask = CR_LED;
+ cr = inb(EWRK3_CR);
+ outb(cr & ~CR_LED, EWRK3_CR);
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ return signal_pending(current) ? -ERESTARTSYS : 0;
+}
+
+static struct ethtool_ops ethtool_ops_203 = {
+ .get_drvinfo = ewrk3_get_drvinfo,
+ .get_settings = ewrk3_get_settings,
+ .set_settings = ewrk3_set_settings,
+ .phys_id = ewrk3_phys_id,
+};
+
+static struct ethtool_ops ethtool_ops = {
+ .get_drvinfo = ewrk3_get_drvinfo,
+ .get_settings = ewrk3_get_settings,
+ .set_settings = ewrk3_set_settings,
+ .get_link = ewrk3_get_link,
+ .phys_id = ewrk3_phys_id,
+};
+
+/*
+ ** Perform IOCTL call functions here. Some are privileged operations and the
+ ** effective uid is checked in those cases.
+ */
+static int ewrk3_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ struct ewrk3_private *lp = netdev_priv(dev);
+ struct ewrk3_ioctl *ioc = (struct ewrk3_ioctl *) &rq->ifr_ifru;
+ u_long iobase = dev->base_addr;
+ int i, j, status = 0;
+ u_char csr;
+ unsigned long flags;
+ union ewrk3_addr {
+ u_char addr[HASH_TABLE_LEN * ETH_ALEN];
+ u_short val[(HASH_TABLE_LEN * ETH_ALEN) >> 1];
+ };
+
+ union ewrk3_addr *tmp;
+
+ /* All we handle are private IOCTLs */
+ if (cmd != EWRK3IOCTL)
+ return -EOPNOTSUPP;
+
+ tmp = kmalloc(sizeof(union ewrk3_addr), GFP_KERNEL);
+ if(tmp==NULL)
+ return -ENOMEM;
+
+ switch (ioc->cmd) {
+ case EWRK3_GET_HWADDR: /* Get the hardware address */
+ for (i = 0; i < ETH_ALEN; i++) {
+ tmp->addr[i] = dev->dev_addr[i];
+ }
+ ioc->len = ETH_ALEN;
+ if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+ status = -EFAULT;
+ break;
+
+ case EWRK3_SET_HWADDR: /* Set the hardware address */
+ if (capable(CAP_NET_ADMIN)) {
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ csr = inb(EWRK3_CSR);
+ csr |= (CSR_TXD | CSR_RXD);
+ outb(csr, EWRK3_CSR); /* Disable the TX and RX */
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+
+ if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN)) {
+ status = -EFAULT;
+ break;
+ }
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ for (i = 0; i < ETH_ALEN; i++) {
+ dev->dev_addr[i] = tmp->addr[i];
+ outb(tmp->addr[i], EWRK3_PAR0 + i);
+ }
+
+ csr = inb(EWRK3_CSR);
+ csr &= ~(CSR_TXD | CSR_RXD); /* Enable the TX and RX */
+ outb(csr, EWRK3_CSR);
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_SET_PROM: /* Set Promiscuous Mode */
+ if (capable(CAP_NET_ADMIN)) {
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ csr = inb(EWRK3_CSR);
+ csr |= CSR_PME;
+ csr &= ~CSR_MCE;
+ outb(csr, EWRK3_CSR);
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_CLR_PROM: /* Clear Promiscuous Mode */
+ if (capable(CAP_NET_ADMIN)) {
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ csr = inb(EWRK3_CSR);
+ csr &= ~CSR_PME;
+ outb(csr, EWRK3_CSR);
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_GET_MCA: /* Get the multicast address table */
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ if (lp->shmem_length == IO_ONLY) {
+ outb(0, EWRK3_IOPR);
+ outw(PAGE0_HTE, EWRK3_PIR1);
+ for (i = 0; i < (HASH_TABLE_LEN >> 3); i++) {
+ tmp->addr[i] = inb(EWRK3_DATA);
+ }
+ } else {
+ outb(0, EWRK3_MPR);
+ memcpy_fromio(tmp->addr, lp->shmem + PAGE0_HTE, (HASH_TABLE_LEN >> 3));
+ }
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+
+ ioc->len = (HASH_TABLE_LEN >> 3);
+ if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+ status = -EFAULT;
+
+ break;
+ case EWRK3_SET_MCA: /* Set a multicast address */
+ if (capable(CAP_NET_ADMIN)) {
+ if (ioc->len > 1024)
+ {
+ status = -EINVAL;
+ break;
+ }
+ if (copy_from_user(tmp->addr, ioc->data, ETH_ALEN * ioc->len)) {
+ status = -EFAULT;
+ break;
+ }
+ set_multicast_list(dev);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_CLR_MCA: /* Clear all multicast addresses */
+ if (capable(CAP_NET_ADMIN)) {
+ set_multicast_list(dev);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_MCA_EN: /* Enable multicast addressing */
+ if (capable(CAP_NET_ADMIN)) {
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ csr = inb(EWRK3_CSR);
+ csr |= CSR_MCE;
+ csr &= ~CSR_PME;
+ outb(csr, EWRK3_CSR);
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_GET_STATS: { /* Get the driver statistics */
+ struct ewrk3_stats *tmp_stats =
+ kmalloc(sizeof(lp->pktStats), GFP_KERNEL);
+ if (!tmp_stats) {
+ status = -ENOMEM;
+ break;
+ }
+
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ memcpy(tmp_stats, &lp->pktStats, sizeof(lp->pktStats));
+ spin_unlock_irqrestore(&lp->hw_lock, flags);
+
+ ioc->len = sizeof(lp->pktStats);
+ if (copy_to_user(ioc->data, tmp_stats, sizeof(lp->pktStats)))
+ status = -EFAULT;
+ kfree(tmp_stats);
+ break;
+ }
+ case EWRK3_CLR_STATS: /* Zero out the driver statistics */
+ if (capable(CAP_NET_ADMIN)) {
+ spin_lock_irqsave(&lp->hw_lock, flags);
+ memset(&lp->pktStats, 0, sizeof(lp->pktStats));
+ spin_unlock_irqrestore(&lp->hw_lock,flags);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_GET_CSR: /* Get the CSR Register contents */
+ tmp->addr[0] = inb(EWRK3_CSR);
+ ioc->len = 1;
+ if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+ status = -EFAULT;
+ break;
+ case EWRK3_SET_CSR: /* Set the CSR Register contents */
+ if (capable(CAP_NET_ADMIN)) {
+ if (copy_from_user(tmp->addr, ioc->data, 1)) {
+ status = -EFAULT;
+ break;
+ }
+ outb(tmp->addr[0], EWRK3_CSR);
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_GET_EEPROM: /* Get the EEPROM contents */
+ if (capable(CAP_NET_ADMIN)) {
+ for (i = 0; i < (EEPROM_MAX >> 1); i++) {
+ tmp->val[i] = (short) Read_EEPROM(iobase, i);
+ }
+ i = EEPROM_MAX;
+ tmp->addr[i++] = inb(EWRK3_CMR); /* Config/Management Reg. */
+ for (j = 0; j < ETH_ALEN; j++) {
+ tmp->addr[i++] = inb(EWRK3_PAR0 + j);
+ }
+ ioc->len = EEPROM_MAX + 1 + ETH_ALEN;
+ if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+ status = -EFAULT;
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_SET_EEPROM: /* Set the EEPROM contents */
+ if (capable(CAP_NET_ADMIN)) {
+ if (copy_from_user(tmp->addr, ioc->data, EEPROM_MAX)) {
+ status = -EFAULT;
+ break;
+ }
+ for (i = 0; i < (EEPROM_MAX >> 1); i++) {
+ Write_EEPROM(tmp->val[i], iobase, i);
+ }
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_GET_CMR: /* Get the CMR Register contents */
+ tmp->addr[0] = inb(EWRK3_CMR);
+ ioc->len = 1;
+ if (copy_to_user(ioc->data, tmp->addr, ioc->len))
+ status = -EFAULT;
+ break;
+ case EWRK3_SET_TX_CUT_THRU: /* Set TX cut through mode */
+ if (capable(CAP_NET_ADMIN)) {
+ lp->txc = 1;
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ case EWRK3_CLR_TX_CUT_THRU: /* Clear TX cut through mode */
+ if (capable(CAP_NET_ADMIN)) {
+ lp->txc = 0;
+ } else {
+ status = -EPERM;
+ }
+
+ break;
+ default:
+ status = -EOPNOTSUPP;
+ }
+ kfree(tmp);
+ return status;
+}
+
+#ifdef MODULE
+static struct net_device *ewrk3_devs[MAX_NUM_EWRK3S];
+static int ndevs;
+static int io[MAX_NUM_EWRK3S+1] = { 0x300, 0, };
+
+/* '21' below should really be 'MAX_NUM_EWRK3S' */
+module_param_array(io, int, NULL, 0);
+module_param_array(irq, int, NULL, 0);
+MODULE_PARM_DESC(io, "EtherWORKS 3 I/O base address(es)");
+MODULE_PARM_DESC(irq, "EtherWORKS 3 IRQ number(s)");
+
+static __exit void ewrk3_exit_module(void)
+{
+ int i;
+
+ for( i=0; i<ndevs; i++ ) {
+ struct net_device *dev = ewrk3_devs[i];
+ struct ewrk3_private *lp = netdev_priv(dev);
+ ewrk3_devs[i] = NULL;
+ unregister_netdev(dev);
+ release_region(dev->base_addr, EWRK3_TOTAL_SIZE);
+ iounmap(lp->shmem);
+ free_netdev(dev);
+ }
+}
+
+static __init int ewrk3_init_module(void)
+{
+ int i=0;
+
+ while( io[i] && irq[i] ) {
+ struct net_device *dev
+ = alloc_etherdev(sizeof(struct ewrk3_private));
+
+ if (!dev)
+ break;
+
+ if (ewrk3_probe1(dev, io[i], irq[i]) != 0) {
+ free_netdev(dev);
+ break;
+ }
+
+ ewrk3_devs[ndevs++] = dev;
+ i++;
+ }
+
+ return ndevs ? 0 : -EIO;
+}
+
+
+/* Hack for breakage in new module stuff */
+module_exit(ewrk3_exit_module);
+module_init(ewrk3_init_module);
+#endif /* MODULE */
+MODULE_LICENSE("GPL");
+
+
+
+/*
+ * Local variables:
+ * compile-command: "gcc -D__KERNEL__ -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c ewrk3.c"
+ *
+ * compile-command: "gcc -D__KERNEL__ -DMODULE -I/linux/include -Wall -Wstrict-prototypes -fomit-frame-pointer -fno-strength-reduce -malign-loops=2 -malign-jumps=2 -malign-functions=2 -O2 -m486 -c ewrk3.c"
+ * End:
+ */