summaryrefslogtreecommitdiff
path: root/drivers/net/irda/irda-usb.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/net/irda/irda-usb.c
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/net/irda/irda-usb.c')
-rw-r--r--drivers/net/irda/irda-usb.c1602
1 files changed, 1602 insertions, 0 deletions
diff --git a/drivers/net/irda/irda-usb.c b/drivers/net/irda/irda-usb.c
new file mode 100644
index 000000000000..46e0022d3258
--- /dev/null
+++ b/drivers/net/irda/irda-usb.c
@@ -0,0 +1,1602 @@
+/*****************************************************************************
+ *
+ * Filename: irda-usb.c
+ * Version: 0.9b
+ * Description: IrDA-USB Driver
+ * Status: Experimental
+ * Author: Dag Brattli <dag@brattli.net>
+ *
+ * Copyright (C) 2000, Roman Weissgaerber <weissg@vienna.at>
+ * Copyright (C) 2001, Dag Brattli <dag@brattli.net>
+ * Copyright (C) 2001, Jean Tourrilhes <jt@hpl.hp.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *****************************************************************************/
+
+/*
+ * IMPORTANT NOTE
+ * --------------
+ *
+ * As of kernel 2.5.20, this is the state of compliance and testing of
+ * this driver (irda-usb) with regards to the USB low level drivers...
+ *
+ * This driver has been tested SUCCESSFULLY with the following drivers :
+ * o usb-uhci-hcd (For Intel/Via USB controllers)
+ * o uhci-hcd (Alternate/JE driver for Intel/Via USB controllers)
+ * o ohci-hcd (For other USB controllers)
+ *
+ * This driver has NOT been tested with the following drivers :
+ * o ehci-hcd (USB 2.0 controllers)
+ *
+ * Note that all HCD drivers do URB_ZERO_PACKET and timeout properly,
+ * so we don't have to worry about that anymore.
+ * One common problem is the failure to set the address on the dongle,
+ * but this happens before the driver gets loaded...
+ *
+ * Jean II
+ */
+
+/*------------------------------------------------------------------*/
+
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/init.h>
+#include <linux/skbuff.h>
+#include <linux/netdevice.h>
+#include <linux/slab.h>
+#include <linux/rtnetlink.h>
+#include <linux/usb.h>
+
+#include "irda-usb.h"
+
+/*------------------------------------------------------------------*/
+
+static int qos_mtt_bits = 0;
+
+/* These are the currently known IrDA USB dongles. Add new dongles here */
+static struct usb_device_id dongles[] = {
+ /* ACTiSYS Corp., ACT-IR2000U FIR-USB Adapter */
+ { USB_DEVICE(0x9c4, 0x011), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* Look like ACTiSYS, Report : IBM Corp., IBM UltraPort IrDA */
+ { USB_DEVICE(0x4428, 0x012), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* KC Technology Inc., KC-180 USB IrDA Device */
+ { USB_DEVICE(0x50f, 0x180), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ /* Extended Systems, Inc., XTNDAccess IrDA USB (ESI-9685) */
+ { USB_DEVICE(0x8e9, 0x100), .driver_info = IUC_SPEED_BUG | IUC_NO_WINDOW },
+ { .match_flags = USB_DEVICE_ID_MATCH_INT_CLASS |
+ USB_DEVICE_ID_MATCH_INT_SUBCLASS,
+ .bInterfaceClass = USB_CLASS_APP_SPEC,
+ .bInterfaceSubClass = USB_CLASS_IRDA,
+ .driver_info = IUC_DEFAULT, },
+ { }, /* The end */
+};
+
+/*
+ * Important note :
+ * Devices based on the SigmaTel chipset (0x66f, 0x4200) are not designed
+ * using the "USB-IrDA specification" (yes, there exist such a thing), and
+ * therefore not supported by this driver (don't add them above).
+ * There is a Linux driver, stir4200, that support those USB devices.
+ * Jean II
+ */
+
+MODULE_DEVICE_TABLE(usb, dongles);
+
+/*------------------------------------------------------------------*/
+
+static struct irda_class_desc *irda_usb_find_class_desc(struct usb_interface *intf);
+static void irda_usb_disconnect(struct usb_interface *intf);
+static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self);
+static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *dev);
+static int irda_usb_open(struct irda_usb_cb *self);
+static void irda_usb_close(struct irda_usb_cb *self);
+static void speed_bulk_callback(struct urb *urb, struct pt_regs *regs);
+static void write_bulk_callback(struct urb *urb, struct pt_regs *regs);
+static void irda_usb_receive(struct urb *urb, struct pt_regs *regs);
+static int irda_usb_net_open(struct net_device *dev);
+static int irda_usb_net_close(struct net_device *dev);
+static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
+static void irda_usb_net_timeout(struct net_device *dev);
+static struct net_device_stats *irda_usb_net_get_stats(struct net_device *dev);
+
+/************************ TRANSMIT ROUTINES ************************/
+/*
+ * Receive packets from the IrDA stack and send them on the USB pipe.
+ * Handle speed change, timeout and lot's of ugliness...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_build_header(self, skb, header)
+ *
+ * Builds USB-IrDA outbound header
+ *
+ * When we send an IrDA frame over an USB pipe, we add to it a 1 byte
+ * header. This function create this header with the proper values.
+ *
+ * Important note : the USB-IrDA spec 1.0 say very clearly in chapter 5.4.2.2
+ * that the setting of the link speed and xbof number in this outbound header
+ * should be applied *AFTER* the frame has been sent.
+ * Unfortunately, some devices are not compliant with that... It seems that
+ * reading the spec is far too difficult...
+ * Jean II
+ */
+static void irda_usb_build_header(struct irda_usb_cb *self,
+ __u8 *header,
+ int force)
+{
+ /* Set the negotiated link speed */
+ if (self->new_speed != -1) {
+ /* Hum... Ugly hack :-(
+ * Some device are not compliant with the spec and change
+ * parameters *before* sending the frame. - Jean II
+ */
+ if ((self->capability & IUC_SPEED_BUG) &&
+ (!force) && (self->speed != -1)) {
+ /* No speed and xbofs change here
+ * (we'll do it later in the write callback) */
+ IRDA_DEBUG(2, "%s(), not changing speed yet\n", __FUNCTION__);
+ *header = 0;
+ return;
+ }
+
+ IRDA_DEBUG(2, "%s(), changing speed to %d\n", __FUNCTION__, self->new_speed);
+ self->speed = self->new_speed;
+ /* We will do ` self->new_speed = -1; ' in the completion
+ * handler just in case the current URB fail - Jean II */
+
+ switch (self->speed) {
+ case 2400:
+ *header = SPEED_2400;
+ break;
+ default:
+ case 9600:
+ *header = SPEED_9600;
+ break;
+ case 19200:
+ *header = SPEED_19200;
+ break;
+ case 38400:
+ *header = SPEED_38400;
+ break;
+ case 57600:
+ *header = SPEED_57600;
+ break;
+ case 115200:
+ *header = SPEED_115200;
+ break;
+ case 576000:
+ *header = SPEED_576000;
+ break;
+ case 1152000:
+ *header = SPEED_1152000;
+ break;
+ case 4000000:
+ *header = SPEED_4000000;
+ self->new_xbofs = 0;
+ break;
+ }
+ } else
+ /* No change */
+ *header = 0;
+
+ /* Set the negotiated additional XBOFS */
+ if (self->new_xbofs != -1) {
+ IRDA_DEBUG(2, "%s(), changing xbofs to %d\n", __FUNCTION__, self->new_xbofs);
+ self->xbofs = self->new_xbofs;
+ /* We will do ` self->new_xbofs = -1; ' in the completion
+ * handler just in case the current URB fail - Jean II */
+
+ switch (self->xbofs) {
+ case 48:
+ *header |= 0x10;
+ break;
+ case 28:
+ case 24: /* USB spec 1.0 says 24 */
+ *header |= 0x20;
+ break;
+ default:
+ case 12:
+ *header |= 0x30;
+ break;
+ case 5: /* Bug in IrLAP spec? (should be 6) */
+ case 6:
+ *header |= 0x40;
+ break;
+ case 3:
+ *header |= 0x50;
+ break;
+ case 2:
+ *header |= 0x60;
+ break;
+ case 1:
+ *header |= 0x70;
+ break;
+ case 0:
+ *header |= 0x80;
+ break;
+ }
+ }
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Send a command to change the speed of the dongle
+ * Need to be called with spinlock on.
+ */
+static void irda_usb_change_speed_xbofs(struct irda_usb_cb *self)
+{
+ __u8 *frame;
+ struct urb *urb;
+ int ret;
+
+ IRDA_DEBUG(2, "%s(), speed=%d, xbofs=%d\n", __FUNCTION__,
+ self->new_speed, self->new_xbofs);
+
+ /* Grab the speed URB */
+ urb = self->speed_urb;
+ if (urb->status != 0) {
+ IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+ return;
+ }
+
+ /* Allocate the fake frame */
+ frame = self->speed_buff;
+
+ /* Set the new speed and xbofs in this fake frame */
+ irda_usb_build_header(self, frame, 1);
+
+ /* Submit the 0 length IrDA frame to trigger new speed settings */
+ usb_fill_bulk_urb(urb, self->usbdev,
+ usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
+ frame, IRDA_USB_SPEED_MTU,
+ speed_bulk_callback, self);
+ urb->transfer_buffer_length = USB_IRDA_HEADER;
+ urb->transfer_flags = URB_ASYNC_UNLINK;
+
+ /* Irq disabled -> GFP_ATOMIC */
+ if ((ret = usb_submit_urb(urb, GFP_ATOMIC))) {
+ IRDA_WARNING("%s(), failed Speed URB\n", __FUNCTION__);
+ }
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Speed URB callback
+ * Now, we can only get called for the speed URB.
+ */
+static void speed_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ struct irda_usb_cb *self = urb->context;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* We should always have a context */
+ IRDA_ASSERT(self != NULL, return;);
+ /* We should always be called for the speed URB */
+ IRDA_ASSERT(urb == self->speed_urb, return;);
+
+ /* Check for timeout and other USB nasties */
+ if (urb->status != 0) {
+ /* I get a lot of -ECONNABORTED = -103 here - Jean II */
+ IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+
+ /* Don't do anything here, that might confuse the USB layer.
+ * Instead, we will wait for irda_usb_net_timeout(), the
+ * network layer watchdog, to fix the situation.
+ * Jean II */
+ /* A reset of the dongle might be welcomed here - Jean II */
+ return;
+ }
+
+ /* urb is now available */
+ //urb->status = 0; -> tested above
+
+ /* New speed and xbof is now commited in hardware */
+ self->new_speed = -1;
+ self->new_xbofs = -1;
+
+ /* Allow the stack to send more packets */
+ netif_wake_queue(self->netdev);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Send an IrDA frame to the USB dongle (for transmission)
+ */
+static int irda_usb_hard_xmit(struct sk_buff *skb, struct net_device *netdev)
+{
+ struct irda_usb_cb *self = netdev->priv;
+ struct urb *urb = self->tx_urb;
+ unsigned long flags;
+ s32 speed;
+ s16 xbofs;
+ int res, mtt;
+ int err = 1; /* Failed */
+
+ IRDA_DEBUG(4, "%s() on %s\n", __FUNCTION__, netdev->name);
+
+ netif_stop_queue(netdev);
+
+ /* Protect us from USB callbacks, net watchdog and else. */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Check if the device is still there.
+ * We need to check self->present under the spinlock because
+ * of irda_usb_disconnect() is synchronous - Jean II */
+ if (!self->present) {
+ IRDA_DEBUG(0, "%s(), Device is gone...\n", __FUNCTION__);
+ goto drop;
+ }
+
+ /* Check if we need to change the number of xbofs */
+ xbofs = irda_get_next_xbofs(skb);
+ if ((xbofs != self->xbofs) && (xbofs != -1)) {
+ self->new_xbofs = xbofs;
+ }
+
+ /* Check if we need to change the speed */
+ speed = irda_get_next_speed(skb);
+ if ((speed != self->speed) && (speed != -1)) {
+ /* Set the desired speed */
+ self->new_speed = speed;
+
+ /* Check for empty frame */
+ if (!skb->len) {
+ /* IrLAP send us an empty frame to make us change the
+ * speed. Changing speed with the USB adapter is in
+ * fact sending an empty frame to the adapter, so we
+ * could just let the present function do its job.
+ * However, we would wait for min turn time,
+ * do an extra memcpy and increment packet counters...
+ * Jean II */
+ irda_usb_change_speed_xbofs(self);
+ netdev->trans_start = jiffies;
+ /* Will netif_wake_queue() in callback */
+ err = 0; /* No error */
+ goto drop;
+ }
+ }
+
+ if (urb->status != 0) {
+ IRDA_WARNING("%s(), URB still in use!\n", __FUNCTION__);
+ goto drop;
+ }
+
+ /* Make sure there is room for IrDA-USB header. The actual
+ * allocation will be done lower in skb_push().
+ * Also, we don't use directly skb_cow(), because it require
+ * headroom >= 16, which force unnecessary copies - Jean II */
+ if (skb_headroom(skb) < USB_IRDA_HEADER) {
+ IRDA_DEBUG(0, "%s(), Insuficient skb headroom.\n", __FUNCTION__);
+ if (skb_cow(skb, USB_IRDA_HEADER)) {
+ IRDA_WARNING("%s(), failed skb_cow() !!!\n", __FUNCTION__);
+ goto drop;
+ }
+ }
+
+ /* Change setting for next frame */
+ irda_usb_build_header(self, skb_push(skb, USB_IRDA_HEADER), 0);
+
+ /* FIXME: Make macro out of this one */
+ ((struct irda_skb_cb *)skb->cb)->context = self;
+
+ usb_fill_bulk_urb(urb, self->usbdev,
+ usb_sndbulkpipe(self->usbdev, self->bulk_out_ep),
+ skb->data, IRDA_SKB_MAX_MTU,
+ write_bulk_callback, skb);
+ urb->transfer_buffer_length = skb->len;
+ /* Note : unlink *must* be Asynchronous because of the code in
+ * irda_usb_net_timeout() -> call in irq - Jean II */
+ urb->transfer_flags = URB_ASYNC_UNLINK;
+ /* This flag (URB_ZERO_PACKET) indicates that what we send is not
+ * a continuous stream of data but separate packets.
+ * In this case, the USB layer will insert an empty USB frame (TD)
+ * after each of our packets that is exact multiple of the frame size.
+ * This is how the dongle will detect the end of packet - Jean II */
+ urb->transfer_flags |= URB_ZERO_PACKET;
+
+ /* Generate min turn time. FIXME: can we do better than this? */
+ /* Trying to a turnaround time at this level is trying to measure
+ * processor clock cycle with a wrist-watch, approximate at best...
+ *
+ * What we know is the last time we received a frame over USB.
+ * Due to latency over USB that depend on the USB load, we don't
+ * know when this frame was received over IrDA (a few ms before ?)
+ * Then, same story for our outgoing frame...
+ *
+ * In theory, the USB dongle is supposed to handle the turnaround
+ * by itself (spec 1.0, chater 4, page 6). Who knows ??? That's
+ * why this code is enabled only for dongles that doesn't meet
+ * the spec.
+ * Jean II */
+ if (self->capability & IUC_NO_TURN) {
+ mtt = irda_get_mtt(skb);
+ if (mtt) {
+ int diff;
+ do_gettimeofday(&self->now);
+ diff = self->now.tv_usec - self->stamp.tv_usec;
+#ifdef IU_USB_MIN_RTT
+ /* Factor in USB delays -> Get rid of udelay() that
+ * would be lost in the noise - Jean II */
+ diff += IU_USB_MIN_RTT;
+#endif /* IU_USB_MIN_RTT */
+ /* If the usec counter did wraparound, the diff will
+ * go negative (tv_usec is a long), so we need to
+ * correct it by one second. Jean II */
+ if (diff < 0)
+ diff += 1000000;
+
+ /* Check if the mtt is larger than the time we have
+ * already used by all the protocol processing
+ */
+ if (mtt > diff) {
+ mtt -= diff;
+ if (mtt > 1000)
+ mdelay(mtt/1000);
+ else
+ udelay(mtt);
+ }
+ }
+ }
+
+ /* Ask USB to send the packet - Irq disabled -> GFP_ATOMIC */
+ if ((res = usb_submit_urb(urb, GFP_ATOMIC))) {
+ IRDA_WARNING("%s(), failed Tx URB\n", __FUNCTION__);
+ self->stats.tx_errors++;
+ /* Let USB recover : We will catch that in the watchdog */
+ /*netif_start_queue(netdev);*/
+ } else {
+ /* Increment packet stats */
+ self->stats.tx_packets++;
+ self->stats.tx_bytes += skb->len;
+
+ netdev->trans_start = jiffies;
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ return 0;
+
+drop:
+ /* Drop silently the skb and exit */
+ dev_kfree_skb(skb);
+ spin_unlock_irqrestore(&self->lock, flags);
+ return err; /* Usually 1 */
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Note : this function will be called only for tx_urb...
+ */
+static void write_bulk_callback(struct urb *urb, struct pt_regs *regs)
+{
+ unsigned long flags;
+ struct sk_buff *skb = urb->context;
+ struct irda_usb_cb *self = ((struct irda_skb_cb *) skb->cb)->context;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* We should always have a context */
+ IRDA_ASSERT(self != NULL, return;);
+ /* We should always be called for the speed URB */
+ IRDA_ASSERT(urb == self->tx_urb, return;);
+
+ /* Free up the skb */
+ dev_kfree_skb_any(skb);
+ urb->context = NULL;
+
+ /* Check for timeout and other USB nasties */
+ if (urb->status != 0) {
+ /* I get a lot of -ECONNABORTED = -103 here - Jean II */
+ IRDA_DEBUG(0, "%s(), URB complete status %d, transfer_flags 0x%04X\n", __FUNCTION__, urb->status, urb->transfer_flags);
+
+ /* Don't do anything here, that might confuse the USB layer,
+ * and we could go in recursion and blow the kernel stack...
+ * Instead, we will wait for irda_usb_net_timeout(), the
+ * network layer watchdog, to fix the situation.
+ * Jean II */
+ /* A reset of the dongle might be welcomed here - Jean II */
+ return;
+ }
+
+ /* urb is now available */
+ //urb->status = 0; -> tested above
+
+ /* Make sure we read self->present properly */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* If the network is closed, stop everything */
+ if ((!self->netopen) || (!self->present)) {
+ IRDA_DEBUG(0, "%s(), Network is gone...\n", __FUNCTION__);
+ spin_unlock_irqrestore(&self->lock, flags);
+ return;
+ }
+
+ /* If changes to speed or xbofs is pending... */
+ if ((self->new_speed != -1) || (self->new_xbofs != -1)) {
+ if ((self->new_speed != self->speed) ||
+ (self->new_xbofs != self->xbofs)) {
+ /* We haven't changed speed yet (because of
+ * IUC_SPEED_BUG), so do it now - Jean II */
+ IRDA_DEBUG(1, "%s(), Changing speed now...\n", __FUNCTION__);
+ irda_usb_change_speed_xbofs(self);
+ } else {
+ /* New speed and xbof is now commited in hardware */
+ self->new_speed = -1;
+ self->new_xbofs = -1;
+ /* Done, waiting for next packet */
+ netif_wake_queue(self->netdev);
+ }
+ } else {
+ /* Otherwise, allow the stack to send more packets */
+ netif_wake_queue(self->netdev);
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Watchdog timer from the network layer.
+ * After a predetermined timeout, if we don't give confirmation that
+ * the packet has been sent (i.e. no call to netif_wake_queue()),
+ * the network layer will call this function.
+ * Note that URB that we submit have also a timeout. When the URB timeout
+ * expire, the normal URB callback is called (write_bulk_callback()).
+ */
+static void irda_usb_net_timeout(struct net_device *netdev)
+{
+ unsigned long flags;
+ struct irda_usb_cb *self = netdev->priv;
+ struct urb *urb;
+ int done = 0; /* If we have made any progress */
+
+ IRDA_DEBUG(0, "%s(), Network layer thinks we timed out!\n", __FUNCTION__);
+ IRDA_ASSERT(self != NULL, return;);
+
+ /* Protect us from USB callbacks, net Tx and else. */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* self->present *MUST* be read under spinlock */
+ if (!self->present) {
+ IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+ netif_stop_queue(netdev);
+ spin_unlock_irqrestore(&self->lock, flags);
+ return;
+ }
+
+ /* Check speed URB */
+ urb = self->speed_urb;
+ if (urb->status != 0) {
+ IRDA_DEBUG(0, "%s: Speed change timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+
+ switch (urb->status) {
+ case -EINPROGRESS:
+ usb_unlink_urb(urb);
+ /* Note : above will *NOT* call netif_wake_queue()
+ * in completion handler, we will come back here.
+ * Jean II */
+ done = 1;
+ break;
+ case -ECONNABORTED: /* -103 */
+ case -ECONNRESET: /* -104 */
+ case -ETIMEDOUT: /* -110 */
+ case -ENOENT: /* -2 (urb unlinked by us) */
+ default: /* ??? - Play safe */
+ urb->status = 0;
+ netif_wake_queue(self->netdev);
+ done = 1;
+ break;
+ }
+ }
+
+ /* Check Tx URB */
+ urb = self->tx_urb;
+ if (urb->status != 0) {
+ struct sk_buff *skb = urb->context;
+
+ IRDA_DEBUG(0, "%s: Tx timed out, urb->status=%d, urb->transfer_flags=0x%04X\n", netdev->name, urb->status, urb->transfer_flags);
+
+ /* Increase error count */
+ self->stats.tx_errors++;
+
+#ifdef IU_BUG_KICK_TIMEOUT
+ /* Can't be a bad idea to reset the speed ;-) - Jean II */
+ if(self->new_speed == -1)
+ self->new_speed = self->speed;
+ if(self->new_xbofs == -1)
+ self->new_xbofs = self->xbofs;
+ irda_usb_change_speed_xbofs(self);
+#endif /* IU_BUG_KICK_TIMEOUT */
+
+ switch (urb->status) {
+ case -EINPROGRESS:
+ usb_unlink_urb(urb);
+ /* Note : above will *NOT* call netif_wake_queue()
+ * in completion handler, because urb->status will
+ * be -ENOENT. We will fix that at the next watchdog,
+ * leaving more time to USB to recover...
+ * Also, we are in interrupt, so we need to have
+ * URB_ASYNC_UNLINK to work properly...
+ * Jean II */
+ done = 1;
+ break;
+ case -ECONNABORTED: /* -103 */
+ case -ECONNRESET: /* -104 */
+ case -ETIMEDOUT: /* -110 */
+ case -ENOENT: /* -2 (urb unlinked by us) */
+ default: /* ??? - Play safe */
+ if(skb != NULL) {
+ dev_kfree_skb_any(skb);
+ urb->context = NULL;
+ }
+ urb->status = 0;
+ netif_wake_queue(self->netdev);
+ done = 1;
+ break;
+ }
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /* Maybe we need a reset */
+ /* Note : Some drivers seem to use a usb_set_interface() when they
+ * need to reset the hardware. Hum...
+ */
+
+ /* if(done == 0) */
+}
+
+/************************* RECEIVE ROUTINES *************************/
+/*
+ * Receive packets from the USB layer stack and pass them to the IrDA stack.
+ * Try to work around USB failures...
+ */
+
+/*
+ * Note :
+ * Some of you may have noticed that most dongle have an interrupt in pipe
+ * that we don't use. Here is the little secret...
+ * When we hang a Rx URB on the bulk in pipe, it generates some USB traffic
+ * in every USB frame. This is unnecessary overhead.
+ * The interrupt in pipe will generate an event every time a packet is
+ * received. Reading an interrupt pipe adds minimal overhead, but has some
+ * latency (~1ms).
+ * If we are connected (speed != 9600), we want to minimise latency, so
+ * we just always hang the Rx URB and ignore the interrupt.
+ * If we are not connected (speed == 9600), there is usually no Rx traffic,
+ * and we want to minimise the USB overhead. In this case we should wait
+ * on the interrupt pipe and hang the Rx URB only when an interrupt is
+ * received.
+ * Jean II
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Submit a Rx URB to the USB layer to handle reception of a frame
+ * Mostly called by the completion callback of the previous URB.
+ *
+ * Jean II
+ */
+static void irda_usb_submit(struct irda_usb_cb *self, struct sk_buff *skb, struct urb *urb)
+{
+ struct irda_skb_cb *cb;
+ int ret;
+
+ IRDA_DEBUG(2, "%s()\n", __FUNCTION__);
+
+ /* This should never happen */
+ IRDA_ASSERT(skb != NULL, return;);
+ IRDA_ASSERT(urb != NULL, return;);
+
+ /* Save ourselves in the skb */
+ cb = (struct irda_skb_cb *) skb->cb;
+ cb->context = self;
+
+ /* Reinitialize URB */
+ usb_fill_bulk_urb(urb, self->usbdev,
+ usb_rcvbulkpipe(self->usbdev, self->bulk_in_ep),
+ skb->data, skb->truesize,
+ irda_usb_receive, skb);
+ /* Note : unlink *must* be synchronous because of the code in
+ * irda_usb_net_close() -> free the skb - Jean II */
+ urb->status = 0;
+
+ /* Can be called from irda_usb_receive (irq handler) -> GFP_ATOMIC */
+ ret = usb_submit_urb(urb, GFP_ATOMIC);
+ if (ret) {
+ /* If this ever happen, we are in deep s***.
+ * Basically, the Rx path will stop... */
+ IRDA_WARNING("%s(), Failed to submit Rx URB %d\n",
+ __FUNCTION__, ret);
+ }
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_receive(urb)
+ *
+ * Called by the USB subsystem when a frame has been received
+ *
+ */
+static void irda_usb_receive(struct urb *urb, struct pt_regs *regs)
+{
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ struct irda_usb_cb *self;
+ struct irda_skb_cb *cb;
+ struct sk_buff *newskb;
+ struct sk_buff *dataskb;
+ int docopy;
+
+ IRDA_DEBUG(2, "%s(), len=%d\n", __FUNCTION__, urb->actual_length);
+
+ /* Find ourselves */
+ cb = (struct irda_skb_cb *) skb->cb;
+ IRDA_ASSERT(cb != NULL, return;);
+ self = (struct irda_usb_cb *) cb->context;
+ IRDA_ASSERT(self != NULL, return;);
+
+ /* If the network is closed or the device gone, stop everything */
+ if ((!self->netopen) || (!self->present)) {
+ IRDA_DEBUG(0, "%s(), Network is gone!\n", __FUNCTION__);
+ /* Don't re-submit the URB : will stall the Rx path */
+ return;
+ }
+
+ /* Check the status */
+ if (urb->status != 0) {
+ switch (urb->status) {
+ case -EILSEQ:
+ self->stats.rx_errors++;
+ self->stats.rx_crc_errors++;
+ break;
+ case -ECONNRESET: /* -104 */
+ IRDA_DEBUG(0, "%s(), Connection Reset (-104), transfer_flags 0x%04X \n", __FUNCTION__, urb->transfer_flags);
+ /* uhci_cleanup_unlink() is going to kill the Rx
+ * URB just after we return. No problem, at this
+ * point the URB will be idle ;-) - Jean II */
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), RX status %d,transfer_flags 0x%04X \n", __FUNCTION__, urb->status, urb->transfer_flags);
+ break;
+ }
+ goto done;
+ }
+
+ /* Check for empty frames */
+ if (urb->actual_length <= USB_IRDA_HEADER) {
+ IRDA_WARNING("%s(), empty frame!\n", __FUNCTION__);
+ goto done;
+ }
+
+ /*
+ * Remember the time we received this frame, so we can
+ * reduce the min turn time a bit since we will know
+ * how much time we have used for protocol processing
+ */
+ do_gettimeofday(&self->stamp);
+
+ /* Check if we need to copy the data to a new skb or not.
+ * For most frames, we use ZeroCopy and pass the already
+ * allocated skb up the stack.
+ * If the frame is small, it is more efficient to copy it
+ * to save memory (copy will be fast anyway - that's
+ * called Rx-copy-break). Jean II */
+ docopy = (urb->actual_length < IRDA_RX_COPY_THRESHOLD);
+
+ /* Allocate a new skb */
+ newskb = dev_alloc_skb(docopy ? urb->actual_length : IRDA_SKB_MAX_MTU);
+ if (!newskb) {
+ self->stats.rx_dropped++;
+ /* We could deliver the current skb, but this would stall
+ * the Rx path. Better drop the packet... Jean II */
+ goto done;
+ }
+
+ /* Make sure IP header get aligned (IrDA header is 5 bytes) */
+ /* But IrDA-USB header is 1 byte. Jean II */
+ //skb_reserve(newskb, USB_IRDA_HEADER - 1);
+
+ if(docopy) {
+ /* Copy packet, so we can recycle the original */
+ memcpy(newskb->data, skb->data, urb->actual_length);
+ /* Deliver this new skb */
+ dataskb = newskb;
+ /* And hook the old skb to the URB
+ * Note : we don't need to "clean up" the old skb,
+ * as we never touched it. Jean II */
+ } else {
+ /* We are using ZeroCopy. Deliver old skb */
+ dataskb = skb;
+ /* And hook the new skb to the URB */
+ skb = newskb;
+ }
+
+ /* Set proper length on skb & remove USB-IrDA header */
+ skb_put(dataskb, urb->actual_length);
+ skb_pull(dataskb, USB_IRDA_HEADER);
+
+ /* Ask the networking layer to queue the packet for the IrDA stack */
+ dataskb->dev = self->netdev;
+ dataskb->mac.raw = dataskb->data;
+ dataskb->protocol = htons(ETH_P_IRDA);
+ netif_rx(dataskb);
+
+ /* Keep stats up to date */
+ self->stats.rx_bytes += dataskb->len;
+ self->stats.rx_packets++;
+ self->netdev->last_rx = jiffies;
+
+done:
+ /* Note : at this point, the URB we've just received (urb)
+ * is still referenced by the USB layer. For example, if we
+ * have received a -ECONNRESET, uhci_cleanup_unlink() will
+ * continue to process it (in fact, cleaning it up).
+ * If we were to submit this URB, disaster would ensue.
+ * Therefore, we submit our idle URB, and put this URB in our
+ * idle slot....
+ * Jean II */
+ /* Note : with this scheme, we could submit the idle URB before
+ * processing the Rx URB. Another time... Jean II */
+
+ /* Submit the idle URB to replace the URB we've just received */
+ irda_usb_submit(self, skb, self->idle_rx_urb);
+ /* Recycle Rx URB : Now, the idle URB is the present one */
+ urb->context = NULL;
+ self->idle_rx_urb = urb;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Callbak from IrDA layer. IrDA wants to know if we have
+ * started receiving anything.
+ */
+static int irda_usb_is_receiving(struct irda_usb_cb *self)
+{
+ /* Note : because of the way UHCI works, it's almost impossible
+ * to get this info. The Controller DMA directly to memory and
+ * signal only when the whole frame is finished. To know if the
+ * first TD of the URB has been filled or not seems hard work...
+ *
+ * The other solution would be to use the "receiving" command
+ * on the default decriptor with a usb_control_msg(), but that
+ * would add USB traffic and would return result only in the
+ * next USB frame (~1ms).
+ *
+ * I've been told that current dongles send status info on their
+ * interrupt endpoint, and that's what the Windows driver uses
+ * to know this info. Unfortunately, this is not yet in the spec...
+ *
+ * Jean II
+ */
+
+ return 0; /* For now */
+}
+
+/********************** IRDA DEVICE CALLBACKS **********************/
+/*
+ * Main calls from the IrDA/Network subsystem.
+ * Mostly registering a new irda-usb device and removing it....
+ * We only deal with the IrDA side of the business, the USB side will
+ * be dealt with below...
+ */
+
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_net_open (dev)
+ *
+ * Network device is taken up. Usually this is done by "ifconfig irda0 up"
+ *
+ * Note : don't mess with self->netopen - Jean II
+ */
+static int irda_usb_net_open(struct net_device *netdev)
+{
+ struct irda_usb_cb *self;
+ char hwname[16];
+ int i;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(netdev != NULL, return -1;);
+ self = (struct irda_usb_cb *) netdev->priv;
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ /* Can only open the device if it's there */
+ if(!self->present) {
+ IRDA_WARNING("%s(), device not present!\n", __FUNCTION__);
+ return -1;
+ }
+
+ /* Initialise default speed and xbofs value
+ * (IrLAP will change that soon) */
+ self->speed = -1;
+ self->xbofs = -1;
+ self->new_speed = -1;
+ self->new_xbofs = -1;
+
+ /* To do *before* submitting Rx urbs and starting net Tx queue
+ * Jean II */
+ self->netopen = 1;
+
+ /*
+ * Now that everything should be initialized properly,
+ * Open new IrLAP layer instance to take care of us...
+ * Note : will send immediately a speed change...
+ */
+ sprintf(hwname, "usb#%d", self->usbdev->devnum);
+ self->irlap = irlap_open(netdev, &self->qos, hwname);
+ IRDA_ASSERT(self->irlap != NULL, return -1;);
+
+ /* Allow IrLAP to send data to us */
+ netif_start_queue(netdev);
+
+ /* We submit all the Rx URB except for one that we keep idle.
+ * Need to be initialised before submitting other USBs, because
+ * in some cases as soon as we submit the URBs the USB layer
+ * will trigger a dummy receive - Jean II */
+ self->idle_rx_urb = self->rx_urb[IU_MAX_ACTIVE_RX_URBS];
+ self->idle_rx_urb->context = NULL;
+
+ /* Now that we can pass data to IrLAP, allow the USB layer
+ * to send us some data... */
+ for (i = 0; i < IU_MAX_ACTIVE_RX_URBS; i++) {
+ struct sk_buff *skb = dev_alloc_skb(IRDA_SKB_MAX_MTU);
+ if (!skb) {
+ /* If this ever happen, we are in deep s***.
+ * Basically, we can't start the Rx path... */
+ IRDA_WARNING("%s(), Failed to allocate Rx skb\n",
+ __FUNCTION__);
+ return -1;
+ }
+ //skb_reserve(newskb, USB_IRDA_HEADER - 1);
+ irda_usb_submit(self, skb, self->rx_urb[i]);
+ }
+
+ /* Ready to play !!! */
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_net_close (self)
+ *
+ * Network device is taken down. Usually this is done by
+ * "ifconfig irda0 down"
+ */
+static int irda_usb_net_close(struct net_device *netdev)
+{
+ struct irda_usb_cb *self;
+ int i;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ IRDA_ASSERT(netdev != NULL, return -1;);
+ self = (struct irda_usb_cb *) netdev->priv;
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ /* Clear this flag *before* unlinking the urbs and *before*
+ * stopping the network Tx queue - Jean II */
+ self->netopen = 0;
+
+ /* Stop network Tx queue */
+ netif_stop_queue(netdev);
+
+ /* Deallocate all the Rx path buffers (URBs and skb) */
+ for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ struct urb *urb = self->rx_urb[i];
+ struct sk_buff *skb = (struct sk_buff *) urb->context;
+ /* Cancel the receive command */
+ usb_kill_urb(urb);
+ /* The skb is ours, free it */
+ if(skb) {
+ dev_kfree_skb(skb);
+ urb->context = NULL;
+ }
+ }
+ /* Cancel Tx and speed URB - need to be synchronous to avoid races */
+ self->tx_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->tx_urb);
+ self->speed_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->speed_urb);
+
+ /* Stop and remove instance of IrLAP */
+ if (self->irlap)
+ irlap_close(self->irlap);
+ self->irlap = NULL;
+
+ return 0;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * IOCTLs : Extra out-of-band network commands...
+ */
+static int irda_usb_net_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
+{
+ unsigned long flags;
+ struct if_irda_req *irq = (struct if_irda_req *) rq;
+ struct irda_usb_cb *self;
+ int ret = 0;
+
+ IRDA_ASSERT(dev != NULL, return -1;);
+ self = dev->priv;
+ IRDA_ASSERT(self != NULL, return -1;);
+
+ IRDA_DEBUG(2, "%s(), %s, (cmd=0x%X)\n", __FUNCTION__, dev->name, cmd);
+
+ switch (cmd) {
+ case SIOCSBANDWIDTH: /* Set bandwidth */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* Protect us from USB callbacks, net watchdog and else. */
+ spin_lock_irqsave(&self->lock, flags);
+ /* Check if the device is still there */
+ if(self->present) {
+ /* Set the desired speed */
+ self->new_speed = irq->ifr_baudrate;
+ irda_usb_change_speed_xbofs(self);
+ }
+ spin_unlock_irqrestore(&self->lock, flags);
+ break;
+ case SIOCSMEDIABUSY: /* Set media busy */
+ if (!capable(CAP_NET_ADMIN))
+ return -EPERM;
+ /* Check if the IrDA stack is still there */
+ if(self->netopen)
+ irda_device_set_media_busy(self->netdev, TRUE);
+ break;
+ case SIOCGRECEIVING: /* Check if we are receiving right now */
+ irq->ifr_receiving = irda_usb_is_receiving(self);
+ break;
+ default:
+ ret = -EOPNOTSUPP;
+ }
+
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Get device stats (for /proc/net/dev and ifconfig)
+ */
+static struct net_device_stats *irda_usb_net_get_stats(struct net_device *dev)
+{
+ struct irda_usb_cb *self = dev->priv;
+ return &self->stats;
+}
+
+/********************* IRDA CONFIG SUBROUTINES *********************/
+/*
+ * Various subroutines dealing with IrDA and network stuff we use to
+ * configure and initialise each irda-usb instance.
+ * These functions are used below in the main calls of the driver...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Set proper values in the IrDA QOS structure
+ */
+static inline void irda_usb_init_qos(struct irda_usb_cb *self)
+{
+ struct irda_class_desc *desc;
+
+ IRDA_DEBUG(3, "%s()\n", __FUNCTION__);
+
+ desc = self->irda_desc;
+
+ /* Initialize QoS for this device */
+ irda_init_max_qos_capabilies(&self->qos);
+
+ /* See spec section 7.2 for meaning.
+ * Values are little endian (as most USB stuff), the IrDA stack
+ * use it in native order (see parameters.c). - Jean II */
+ self->qos.baud_rate.bits = le16_to_cpu(desc->wBaudRate);
+ self->qos.min_turn_time.bits = desc->bmMinTurnaroundTime;
+ self->qos.additional_bofs.bits = desc->bmAdditionalBOFs;
+ self->qos.window_size.bits = desc->bmWindowSize;
+ self->qos.data_size.bits = desc->bmDataSize;
+
+ IRDA_DEBUG(0, "%s(), dongle says speed=0x%X, size=0x%X, window=0x%X, bofs=0x%X, turn=0x%X\n",
+ __FUNCTION__, self->qos.baud_rate.bits, self->qos.data_size.bits, self->qos.window_size.bits, self->qos.additional_bofs.bits, self->qos.min_turn_time.bits);
+
+ /* Don't always trust what the dongle tell us */
+ if(self->capability & IUC_SIR_ONLY)
+ self->qos.baud_rate.bits &= 0x00ff;
+ if(self->capability & IUC_SMALL_PKT)
+ self->qos.data_size.bits = 0x07;
+ if(self->capability & IUC_NO_WINDOW)
+ self->qos.window_size.bits = 0x01;
+ if(self->capability & IUC_MAX_WINDOW)
+ self->qos.window_size.bits = 0x7f;
+ if(self->capability & IUC_MAX_XBOFS)
+ self->qos.additional_bofs.bits = 0x01;
+
+#if 1
+ /* Module parameter can override the rx window size */
+ if (qos_mtt_bits)
+ self->qos.min_turn_time.bits = qos_mtt_bits;
+#endif
+ /*
+ * Note : most of those values apply only for the receive path,
+ * the transmit path will be set differently - Jean II
+ */
+ irda_qos_bits_to_value(&self->qos);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Initialise the network side of the irda-usb instance
+ * Called when a new USB instance is registered in irda_usb_probe()
+ */
+static inline int irda_usb_open(struct irda_usb_cb *self)
+{
+ struct net_device *netdev = self->netdev;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ irda_usb_init_qos(self);
+
+ /* Override the network functions we need to use */
+ netdev->hard_start_xmit = irda_usb_hard_xmit;
+ netdev->tx_timeout = irda_usb_net_timeout;
+ netdev->watchdog_timeo = 250*HZ/1000; /* 250 ms > USB timeout */
+ netdev->open = irda_usb_net_open;
+ netdev->stop = irda_usb_net_close;
+ netdev->get_stats = irda_usb_net_get_stats;
+ netdev->do_ioctl = irda_usb_net_ioctl;
+
+ return register_netdev(netdev);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * Cleanup the network side of the irda-usb instance
+ * Called when a USB instance is removed in irda_usb_disconnect()
+ */
+static inline void irda_usb_close(struct irda_usb_cb *self)
+{
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ /* Remove netdevice */
+ unregister_netdev(self->netdev);
+
+ /* Remove the speed buffer */
+ if (self->speed_buff != NULL) {
+ kfree(self->speed_buff);
+ self->speed_buff = NULL;
+ }
+}
+
+/********************** USB CONFIG SUBROUTINES **********************/
+/*
+ * Various subroutines dealing with USB stuff we use to configure and
+ * initialise each irda-usb instance.
+ * These functions are used below in the main calls of the driver...
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_parse_endpoints(dev, ifnum)
+ *
+ * Parse the various endpoints and find the one we need.
+ *
+ * The endpoint are the pipes used to communicate with the USB device.
+ * The spec defines 2 endpoints of type bulk transfer, one in, and one out.
+ * These are used to pass frames back and forth with the dongle.
+ * Most dongle have also an interrupt endpoint, that will be probably
+ * documented in the next spec...
+ */
+static inline int irda_usb_parse_endpoints(struct irda_usb_cb *self, struct usb_host_endpoint *endpoint, int ennum)
+{
+ int i; /* Endpoint index in table */
+
+ /* Init : no endpoints */
+ self->bulk_in_ep = 0;
+ self->bulk_out_ep = 0;
+ self->bulk_int_ep = 0;
+
+ /* Let's look at all those endpoints */
+ for(i = 0; i < ennum; i++) {
+ /* All those variables will get optimised by the compiler,
+ * so let's aim for clarity... - Jean II */
+ __u8 ep; /* Endpoint address */
+ __u8 dir; /* Endpoint direction */
+ __u8 attr; /* Endpoint attribute */
+ __u16 psize; /* Endpoint max packet size in bytes */
+
+ /* Get endpoint address, direction and attribute */
+ ep = endpoint[i].desc.bEndpointAddress & USB_ENDPOINT_NUMBER_MASK;
+ dir = endpoint[i].desc.bEndpointAddress & USB_ENDPOINT_DIR_MASK;
+ attr = endpoint[i].desc.bmAttributes;
+ psize = le16_to_cpu(endpoint[i].desc.wMaxPacketSize);
+
+ /* Is it a bulk endpoint ??? */
+ if(attr == USB_ENDPOINT_XFER_BULK) {
+ /* We need to find an IN and an OUT */
+ if(dir == USB_DIR_IN) {
+ /* This is our Rx endpoint */
+ self->bulk_in_ep = ep;
+ } else {
+ /* This is our Tx endpoint */
+ self->bulk_out_ep = ep;
+ self->bulk_out_mtu = psize;
+ }
+ } else {
+ if((attr == USB_ENDPOINT_XFER_INT) &&
+ (dir == USB_DIR_IN)) {
+ /* This is our interrupt endpoint */
+ self->bulk_int_ep = ep;
+ } else {
+ IRDA_ERROR("%s(), Unrecognised endpoint %02X.\n", __FUNCTION__, ep);
+ }
+ }
+ }
+
+ IRDA_DEBUG(0, "%s(), And our endpoints are : in=%02X, out=%02X (%d), int=%02X\n",
+ __FUNCTION__, self->bulk_in_ep, self->bulk_out_ep, self->bulk_out_mtu, self->bulk_int_ep);
+ /* Should be 8, 16, 32 or 64 bytes */
+ IRDA_ASSERT(self->bulk_out_mtu == 64, ;);
+
+ return((self->bulk_in_ep != 0) && (self->bulk_out_ep != 0));
+}
+
+#ifdef IU_DUMP_CLASS_DESC
+/*------------------------------------------------------------------*/
+/*
+ * Function usb_irda_dump_class_desc(desc)
+ *
+ * Prints out the contents of the IrDA class descriptor
+ *
+ */
+static inline void irda_usb_dump_class_desc(struct irda_class_desc *desc)
+{
+ /* Values are little endian */
+ printk("bLength=%x\n", desc->bLength);
+ printk("bDescriptorType=%x\n", desc->bDescriptorType);
+ printk("bcdSpecRevision=%x\n", le16_to_cpu(desc->bcdSpecRevision));
+ printk("bmDataSize=%x\n", desc->bmDataSize);
+ printk("bmWindowSize=%x\n", desc->bmWindowSize);
+ printk("bmMinTurnaroundTime=%d\n", desc->bmMinTurnaroundTime);
+ printk("wBaudRate=%x\n", le16_to_cpu(desc->wBaudRate));
+ printk("bmAdditionalBOFs=%x\n", desc->bmAdditionalBOFs);
+ printk("bIrdaRateSniff=%x\n", desc->bIrdaRateSniff);
+ printk("bMaxUnicastList=%x\n", desc->bMaxUnicastList);
+}
+#endif /* IU_DUMP_CLASS_DESC */
+
+/*------------------------------------------------------------------*/
+/*
+ * Function irda_usb_find_class_desc(intf)
+ *
+ * Returns instance of IrDA class descriptor, or NULL if not found
+ *
+ * The class descriptor is some extra info that IrDA USB devices will
+ * offer to us, describing their IrDA characteristics. We will use that in
+ * irda_usb_init_qos()
+ */
+static inline struct irda_class_desc *irda_usb_find_class_desc(struct usb_interface *intf)
+{
+ struct usb_device *dev = interface_to_usbdev (intf);
+ struct irda_class_desc *desc;
+ int ret;
+
+ desc = kmalloc(sizeof (*desc), GFP_KERNEL);
+ if (desc == NULL)
+ return NULL;
+ memset(desc, 0, sizeof(*desc));
+
+ /* USB-IrDA class spec 1.0:
+ * 6.1.3: Standard "Get Descriptor" Device Request is not
+ * appropriate to retrieve class-specific descriptor
+ * 6.2.5: Class Specific "Get Class Descriptor" Interface Request
+ * is mandatory and returns the USB-IrDA class descriptor
+ */
+
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev,0),
+ IU_REQ_GET_CLASS_DESC,
+ USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
+ 0, intf->altsetting->desc.bInterfaceNumber, desc,
+ sizeof(*desc), 500);
+
+ IRDA_DEBUG(1, "%s(), ret=%d\n", __FUNCTION__, ret);
+ if (ret < sizeof(*desc)) {
+ IRDA_WARNING("usb-irda: class_descriptor read %s (%d)\n",
+ (ret<0) ? "failed" : "too short", ret);
+ }
+ else if (desc->bDescriptorType != USB_DT_IRDA) {
+ IRDA_WARNING("usb-irda: bad class_descriptor type\n");
+ }
+ else {
+#ifdef IU_DUMP_CLASS_DESC
+ irda_usb_dump_class_desc(desc);
+#endif /* IU_DUMP_CLASS_DESC */
+
+ return desc;
+ }
+ kfree(desc);
+ return NULL;
+}
+
+/*********************** USB DEVICE CALLBACKS ***********************/
+/*
+ * Main calls from the USB subsystem.
+ * Mostly registering a new irda-usb device and removing it....
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * This routine is called by the USB subsystem for each new device
+ * in the system. We need to check if the device is ours, and in
+ * this case start handling it.
+ * The USB layer protect us from reentrancy (via BKL), so we don't need
+ * to spinlock in there... Jean II
+ */
+static int irda_usb_probe(struct usb_interface *intf,
+ const struct usb_device_id *id)
+{
+ struct net_device *net;
+ struct usb_device *dev = interface_to_usbdev(intf);
+ struct irda_usb_cb *self = NULL;
+ struct usb_host_interface *interface;
+ struct irda_class_desc *irda_desc;
+ int ret = -ENOMEM;
+ int i; /* Driver instance index / Rx URB index */
+
+ /* Note : the probe make sure to call us only for devices that
+ * matches the list of dongle (top of the file). So, we
+ * don't need to check if the dongle is really ours.
+ * Jean II */
+
+ IRDA_MESSAGE("IRDA-USB found at address %d, Vendor: %x, Product: %x\n",
+ dev->devnum, le16_to_cpu(dev->descriptor.idVendor),
+ le16_to_cpu(dev->descriptor.idProduct));
+
+ net = alloc_irdadev(sizeof(*self));
+ if (!net)
+ goto err_out;
+
+ SET_MODULE_OWNER(net);
+ SET_NETDEV_DEV(net, &intf->dev);
+ self = net->priv;
+ self->netdev = net;
+ spin_lock_init(&self->lock);
+
+ /* Create all of the needed urbs */
+ for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ self->rx_urb[i] = usb_alloc_urb(0, GFP_KERNEL);
+ if (!self->rx_urb[i]) {
+ goto err_out_1;
+ }
+ }
+ self->tx_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!self->tx_urb) {
+ goto err_out_1;
+ }
+ self->speed_urb = usb_alloc_urb(0, GFP_KERNEL);
+ if (!self->speed_urb) {
+ goto err_out_2;
+ }
+
+ /* Is this really necessary? (no, except maybe for broken devices) */
+ if (usb_reset_configuration (dev) < 0) {
+ err("reset_configuration failed");
+ ret = -EIO;
+ goto err_out_3;
+ }
+
+ /* Is this really necessary? */
+ /* Note : some driver do hardcode the interface number, some others
+ * specify an alternate, but very few driver do like this.
+ * Jean II */
+ ret = usb_set_interface(dev, intf->altsetting->desc.bInterfaceNumber, 0);
+ IRDA_DEBUG(1, "usb-irda: set interface %d result %d\n", intf->altsetting->desc.bInterfaceNumber, ret);
+ switch (ret) {
+ case 0:
+ break;
+ case -EPIPE: /* -EPIPE = -32 */
+ /* Martin Diehl says if we get a -EPIPE we should
+ * be fine and we don't need to do a usb_clear_halt().
+ * - Jean II */
+ IRDA_DEBUG(0, "%s(), Received -EPIPE, ignoring...\n", __FUNCTION__);
+ break;
+ default:
+ IRDA_DEBUG(0, "%s(), Unknown error %d\n", __FUNCTION__, ret);
+ ret = -EIO;
+ goto err_out_3;
+ }
+
+ /* Find our endpoints */
+ interface = intf->cur_altsetting;
+ if(!irda_usb_parse_endpoints(self, interface->endpoint,
+ interface->desc.bNumEndpoints)) {
+ IRDA_ERROR("%s(), Bogus endpoints...\n", __FUNCTION__);
+ ret = -EIO;
+ goto err_out_3;
+ }
+
+ /* Find IrDA class descriptor */
+ irda_desc = irda_usb_find_class_desc(intf);
+ ret = -ENODEV;
+ if (irda_desc == NULL)
+ goto err_out_3;
+
+ self->irda_desc = irda_desc;
+ self->present = 1;
+ self->netopen = 0;
+ self->capability = id->driver_info;
+ self->usbdev = dev;
+ self->usbintf = intf;
+
+ /* Allocate the buffer for speed changes */
+ /* Don't change this buffer size and allocation without doing
+ * some heavy and complete testing. Don't ask why :-(
+ * Jean II */
+ self->speed_buff = (char *) kmalloc(IRDA_USB_SPEED_MTU, GFP_KERNEL);
+ if (self->speed_buff == NULL)
+ goto err_out_3;
+
+ memset(self->speed_buff, 0, IRDA_USB_SPEED_MTU);
+
+ ret = irda_usb_open(self);
+ if (ret)
+ goto err_out_4;
+
+ IRDA_MESSAGE("IrDA: Registered device %s\n", net->name);
+ usb_set_intfdata(intf, self);
+ return 0;
+
+err_out_4:
+ kfree(self->speed_buff);
+err_out_3:
+ /* Free all urbs that we may have created */
+ usb_free_urb(self->speed_urb);
+err_out_2:
+ usb_free_urb(self->tx_urb);
+err_out_1:
+ for (i = 0; i < IU_MAX_RX_URBS; i++) {
+ if (self->rx_urb[i])
+ usb_free_urb(self->rx_urb[i]);
+ }
+ free_netdev(net);
+err_out:
+ return ret;
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * The current irda-usb device is removed, the USB layer tell us
+ * to shut it down...
+ * One of the constraints is that when we exit this function,
+ * we cannot use the usb_device no more. Gone. Destroyed. kfree().
+ * Most other subsystem allow you to destroy the instance at a time
+ * when it's convenient to you, to postpone it to a later date, but
+ * not the USB subsystem.
+ * So, we must make bloody sure that everything gets deactivated.
+ * Jean II
+ */
+static void irda_usb_disconnect(struct usb_interface *intf)
+{
+ unsigned long flags;
+ struct irda_usb_cb *self = usb_get_intfdata(intf);
+ int i;
+
+ IRDA_DEBUG(1, "%s()\n", __FUNCTION__);
+
+ usb_set_intfdata(intf, NULL);
+ if (!self)
+ return;
+
+ /* Make sure that the Tx path is not executing. - Jean II */
+ spin_lock_irqsave(&self->lock, flags);
+
+ /* Oups ! We are not there any more.
+ * This will stop/desactivate the Tx path. - Jean II */
+ self->present = 0;
+
+ /* We need to have irq enabled to unlink the URBs. That's OK,
+ * at this point the Tx path is gone - Jean II */
+ spin_unlock_irqrestore(&self->lock, flags);
+
+ /* Hum... Check if networking is still active (avoid races) */
+ if((self->netopen) || (self->irlap)) {
+ /* Accept no more transmissions */
+ /*netif_device_detach(self->netdev);*/
+ netif_stop_queue(self->netdev);
+ /* Stop all the receive URBs */
+ for (i = 0; i < IU_MAX_RX_URBS; i++)
+ usb_kill_urb(self->rx_urb[i]);
+ /* Cancel Tx and speed URB.
+ * Toggle flags to make sure it's synchronous. */
+ self->tx_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->tx_urb);
+ self->speed_urb->transfer_flags &= ~URB_ASYNC_UNLINK;
+ usb_kill_urb(self->speed_urb);
+ }
+
+ /* Cleanup the device stuff */
+ irda_usb_close(self);
+ /* No longer attached to USB bus */
+ self->usbdev = NULL;
+ self->usbintf = NULL;
+
+ /* Clean up our urbs */
+ for (i = 0; i < IU_MAX_RX_URBS; i++)
+ usb_free_urb(self->rx_urb[i]);
+ /* Clean up Tx and speed URB */
+ usb_free_urb(self->tx_urb);
+ usb_free_urb(self->speed_urb);
+
+ /* Free self and network device */
+ free_netdev(self->netdev);
+ IRDA_DEBUG(0, "%s(), USB IrDA Disconnected\n", __FUNCTION__);
+}
+
+/*------------------------------------------------------------------*/
+/*
+ * USB device callbacks
+ */
+static struct usb_driver irda_driver = {
+ .owner = THIS_MODULE,
+ .name = "irda-usb",
+ .probe = irda_usb_probe,
+ .disconnect = irda_usb_disconnect,
+ .id_table = dongles,
+};
+
+/************************* MODULE CALLBACKS *************************/
+/*
+ * Deal with module insertion/removal
+ * Mostly tell USB about our existence
+ */
+
+/*------------------------------------------------------------------*/
+/*
+ * Module insertion
+ */
+static int __init usb_irda_init(void)
+{
+ int ret;
+
+ ret = usb_register(&irda_driver);
+ if (ret < 0)
+ return ret;
+
+ IRDA_MESSAGE("USB IrDA support registered\n");
+ return 0;
+}
+module_init(usb_irda_init);
+
+/*------------------------------------------------------------------*/
+/*
+ * Module removal
+ */
+static void __exit usb_irda_cleanup(void)
+{
+ /* Deregister the driver and remove all pending instances */
+ usb_deregister(&irda_driver);
+}
+module_exit(usb_irda_cleanup);
+
+/*------------------------------------------------------------------*/
+/*
+ * Module parameters
+ */
+module_param(qos_mtt_bits, int, 0);
+MODULE_PARM_DESC(qos_mtt_bits, "Minimum Turn Time");
+MODULE_AUTHOR("Roman Weissgaerber <weissg@vienna.at>, Dag Brattli <dag@brattli.net> and Jean Tourrilhes <jt@hpl.hp.com>");
+MODULE_DESCRIPTION("IrDA-USB Dongle Driver");
+MODULE_LICENSE("GPL");