summaryrefslogtreecommitdiff
path: root/drivers/net/pcmcia
diff options
context:
space:
mode:
authorJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-07-30 03:27:05 -0700
committerJeff Kirsher <jeffrey.t.kirsher@intel.com>2011-08-12 23:47:43 -0700
commit59ffb30f7d43d4db2b2be165037a1a29d2011cdb (patch)
tree39ba914f7d5c91110fc73b7bd49f02fb202d2588 /drivers/net/pcmcia
parent37b937575b5a93a8fcbd4e1d553415f99381f650 (diff)
xircom: Move the Xircom driver
Move the Xircom driver into drivers/net/ethernet/xircom/ and make the necessary Kconfig and Makefile changes. CC: <psheer@icon.co.za> CC: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Diffstat (limited to 'drivers/net/pcmcia')
-rw-r--r--drivers/net/pcmcia/Kconfig9
-rw-r--r--drivers/net/pcmcia/Makefile1
-rw-r--r--drivers/net/pcmcia/xirc2ps_cs.c1813
3 files changed, 0 insertions, 1823 deletions
diff --git a/drivers/net/pcmcia/Kconfig b/drivers/net/pcmcia/Kconfig
index 80d291ea672f..12e7ae47c066 100644
--- a/drivers/net/pcmcia/Kconfig
+++ b/drivers/net/pcmcia/Kconfig
@@ -21,15 +21,6 @@ menuconfig NET_PCMCIA
if NET_PCMCIA && PCMCIA
-config PCMCIA_XIRC2PS
- tristate "Xircom 16-bit PCMCIA support"
- help
- Say Y here if you intend to attach a Xircom 16-bit PCMCIA (PC-card)
- Ethernet or Fast Ethernet card to your computer.
-
- To compile this driver as a module, choose M here: the module will be
- called xirc2ps_cs. If unsure, say N.
-
config ARCNET_COM20020_CS
tristate "COM20020 ARCnet PCMCIA support"
depends on ARCNET_COM20020
diff --git a/drivers/net/pcmcia/Makefile b/drivers/net/pcmcia/Makefile
index ccf5535e9d3f..618e81667ca0 100644
--- a/drivers/net/pcmcia/Makefile
+++ b/drivers/net/pcmcia/Makefile
@@ -3,7 +3,6 @@
#
# 16-bit client drivers
-obj-$(CONFIG_PCMCIA_XIRC2PS) += xirc2ps_cs.o
obj-$(CONFIG_ARCNET_COM20020_CS)+= com20020_cs.o
obj-$(CONFIG_PCMCIA_IBMTR) += ibmtr_cs.o
diff --git a/drivers/net/pcmcia/xirc2ps_cs.c b/drivers/net/pcmcia/xirc2ps_cs.c
deleted file mode 100644
index e33b190d716f..000000000000
--- a/drivers/net/pcmcia/xirc2ps_cs.c
+++ /dev/null
@@ -1,1813 +0,0 @@
-/* [xirc2ps_cs.c wk 03.11.99] (1.40 1999/11/18 00:06:03)
- * Xircom CreditCard Ethernet Adapter IIps driver
- * Xircom Realport 10/100 (RE-100) driver
- *
- * This driver supports various Xircom CreditCard Ethernet adapters
- * including the CE2, CE IIps, RE-10, CEM28, CEM33, CE33, CEM56,
- * CE3-100, CE3B, RE-100, REM10BT, and REM56G-100.
- *
- * 2000-09-24 <psheer@icon.co.za> The Xircom CE3B-100 may not
- * autodetect the media properly. In this case use the
- * if_port=1 (for 10BaseT) or if_port=4 (for 100BaseT) options
- * to force the media type.
- *
- * Written originally by Werner Koch based on David Hinds' skeleton of the
- * PCMCIA driver.
- *
- * Copyright (c) 1997,1998 Werner Koch (dd9jn)
- *
- * This driver is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * It is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA
- *
- *
- * ALTERNATIVELY, this driver may be distributed under the terms of
- * the following license, in which case the provisions of this license
- * are required INSTEAD OF the GNU General Public License. (This clause
- * is necessary due to a potential bad interaction between the GPL and
- * the restrictions contained in a BSD-style copyright.)
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- * notice, and the entire permission notice in its entirety,
- * including the disclaimer of warranties.
- * 2. Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the distribution.
- * 3. The name of the author may not be used to endorse or promote
- * products derived from this software without specific prior
- * written permission.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
- * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT,
- * INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ptrace.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/in.h>
-#include <linux/delay.h>
-#include <linux/ethtool.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/if_arp.h>
-#include <linux/ioport.h>
-#include <linux/bitops.h>
-#include <linux/mii.h>
-
-#include <pcmcia/cistpl.h>
-#include <pcmcia/cisreg.h>
-#include <pcmcia/ciscode.h>
-
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/uaccess.h>
-
-#ifndef MANFID_COMPAQ
- #define MANFID_COMPAQ 0x0138
- #define MANFID_COMPAQ2 0x0183 /* is this correct? */
-#endif
-
-#include <pcmcia/ds.h>
-
-/* Time in jiffies before concluding Tx hung */
-#define TX_TIMEOUT ((400*HZ)/1000)
-
-/****************
- * Some constants used to access the hardware
- */
-
-/* Register offsets and value constans */
-#define XIRCREG_CR 0 /* Command register (wr) */
-enum xirc_cr {
- TransmitPacket = 0x01,
- SoftReset = 0x02,
- EnableIntr = 0x04,
- ForceIntr = 0x08,
- ClearTxFIFO = 0x10,
- ClearRxOvrun = 0x20,
- RestartTx = 0x40
-};
-#define XIRCREG_ESR 0 /* Ethernet status register (rd) */
-enum xirc_esr {
- FullPktRcvd = 0x01, /* full packet in receive buffer */
- PktRejected = 0x04, /* a packet has been rejected */
- TxPktPend = 0x08, /* TX Packet Pending */
- IncorPolarity = 0x10,
- MediaSelect = 0x20 /* set if TP, clear if AUI */
-};
-#define XIRCREG_PR 1 /* Page Register select */
-#define XIRCREG_EDP 4 /* Ethernet Data Port Register */
-#define XIRCREG_ISR 6 /* Ethernet Interrupt Status Register */
-enum xirc_isr {
- TxBufOvr = 0x01, /* TX Buffer Overflow */
- PktTxed = 0x02, /* Packet Transmitted */
- MACIntr = 0x04, /* MAC Interrupt occurred */
- TxResGrant = 0x08, /* Tx Reservation Granted */
- RxFullPkt = 0x20, /* Rx Full Packet */
- RxPktRej = 0x40, /* Rx Packet Rejected */
- ForcedIntr= 0x80 /* Forced Interrupt */
-};
-#define XIRCREG1_IMR0 12 /* Ethernet Interrupt Mask Register (on page 1)*/
-#define XIRCREG1_IMR1 13
-#define XIRCREG0_TSO 8 /* Transmit Space Open Register (on page 0)*/
-#define XIRCREG0_TRS 10 /* Transmit reservation Size Register (page 0)*/
-#define XIRCREG0_DO 12 /* Data Offset Register (page 0) (wr) */
-#define XIRCREG0_RSR 12 /* Receive Status Register (page 0) (rd) */
-enum xirc_rsr {
- PhyPkt = 0x01, /* set:physical packet, clear: multicast packet */
- BrdcstPkt = 0x02, /* set if it is a broadcast packet */
- PktTooLong = 0x04, /* set if packet length > 1518 */
- AlignErr = 0x10, /* incorrect CRC and last octet not complete */
- CRCErr = 0x20, /* incorrect CRC and last octet is complete */
- PktRxOk = 0x80 /* received ok */
-};
-#define XIRCREG0_PTR 13 /* packets transmitted register (rd) */
-#define XIRCREG0_RBC 14 /* receive byte count regsister (rd) */
-#define XIRCREG1_ECR 14 /* ethernet configurationn register */
-enum xirc_ecr {
- FullDuplex = 0x04, /* enable full duplex mode */
- LongTPMode = 0x08, /* adjust for longer lengths of TP cable */
- DisablePolCor = 0x10,/* disable auto polarity correction */
- DisableLinkPulse = 0x20, /* disable link pulse generation */
- DisableAutoTx = 0x40, /* disable auto-transmit */
-};
-#define XIRCREG2_RBS 8 /* receive buffer start register */
-#define XIRCREG2_LED 10 /* LED Configuration register */
-/* values for the leds: Bits 2-0 for led 1
- * 0 disabled Bits 5-3 for led 2
- * 1 collision
- * 2 noncollision
- * 3 link_detected
- * 4 incor_polarity
- * 5 jabber
- * 6 auto_assertion
- * 7 rx_tx_activity
- */
-#define XIRCREG2_MSR 12 /* Mohawk specific register */
-
-#define XIRCREG4_GPR0 8 /* General Purpose Register 0 */
-#define XIRCREG4_GPR1 9 /* General Purpose Register 1 */
-#define XIRCREG2_GPR2 13 /* General Purpose Register 2 (page2!)*/
-#define XIRCREG4_BOV 10 /* Bonding Version Register */
-#define XIRCREG4_LMA 12 /* Local Memory Address Register */
-#define XIRCREG4_LMD 14 /* Local Memory Data Port */
-/* MAC register can only by accessed with 8 bit operations */
-#define XIRCREG40_CMD0 8 /* Command Register (wr) */
-enum xirc_cmd { /* Commands */
- Transmit = 0x01,
- EnableRecv = 0x04,
- DisableRecv = 0x08,
- Abort = 0x10,
- Online = 0x20,
- IntrAck = 0x40,
- Offline = 0x80
-};
-#define XIRCREG5_RHSA0 10 /* Rx Host Start Address */
-#define XIRCREG40_RXST0 9 /* Receive Status Register */
-#define XIRCREG40_TXST0 11 /* Transmit Status Register 0 */
-#define XIRCREG40_TXST1 12 /* Transmit Status Register 10 */
-#define XIRCREG40_RMASK0 13 /* Receive Mask Register */
-#define XIRCREG40_TMASK0 14 /* Transmit Mask Register 0 */
-#define XIRCREG40_TMASK1 15 /* Transmit Mask Register 0 */
-#define XIRCREG42_SWC0 8 /* Software Configuration 0 */
-#define XIRCREG42_SWC1 9 /* Software Configuration 1 */
-#define XIRCREG42_BOC 10 /* Back-Off Configuration */
-#define XIRCREG44_TDR0 8 /* Time Domain Reflectometry 0 */
-#define XIRCREG44_TDR1 9 /* Time Domain Reflectometry 1 */
-#define XIRCREG44_RXBC_LO 10 /* Rx Byte Count 0 (rd) */
-#define XIRCREG44_RXBC_HI 11 /* Rx Byte Count 1 (rd) */
-#define XIRCREG45_REV 15 /* Revision Register (rd) */
-#define XIRCREG50_IA 8 /* Individual Address (8-13) */
-
-static const char *if_names[] = { "Auto", "10BaseT", "10Base2", "AUI", "100BaseT" };
-
-/* card types */
-#define XIR_UNKNOWN 0 /* unknown: not supported */
-#define XIR_CE 1 /* (prodid 1) different hardware: not supported */
-#define XIR_CE2 2 /* (prodid 2) */
-#define XIR_CE3 3 /* (prodid 3) */
-#define XIR_CEM 4 /* (prodid 1) different hardware: not supported */
-#define XIR_CEM2 5 /* (prodid 2) */
-#define XIR_CEM3 6 /* (prodid 3) */
-#define XIR_CEM33 7 /* (prodid 4) */
-#define XIR_CEM56M 8 /* (prodid 5) */
-#define XIR_CEM56 9 /* (prodid 6) */
-#define XIR_CM28 10 /* (prodid 3) modem only: not supported here */
-#define XIR_CM33 11 /* (prodid 4) modem only: not supported here */
-#define XIR_CM56 12 /* (prodid 5) modem only: not supported here */
-#define XIR_CG 13 /* (prodid 1) GSM modem only: not supported */
-#define XIR_CBE 14 /* (prodid 1) cardbus ethernet: not supported */
-/*====================================================================*/
-
-/* Module parameters */
-
-MODULE_DESCRIPTION("Xircom PCMCIA ethernet driver");
-MODULE_LICENSE("Dual MPL/GPL");
-
-#define INT_MODULE_PARM(n, v) static int n = v; module_param(n, int, 0)
-
-INT_MODULE_PARM(if_port, 0);
-INT_MODULE_PARM(full_duplex, 0);
-INT_MODULE_PARM(do_sound, 1);
-INT_MODULE_PARM(lockup_hack, 0); /* anti lockup hack */
-
-/*====================================================================*/
-
-/* We do not process more than these number of bytes during one
- * interrupt. (Of course we receive complete packets, so this is not
- * an exact value).
- * Something between 2000..22000; first value gives best interrupt latency,
- * the second enables the usage of the complete on-chip buffer. We use the
- * high value as the initial value.
- */
-static unsigned maxrx_bytes = 22000;
-
-/* MII management prototypes */
-static void mii_idle(unsigned int ioaddr);
-static void mii_putbit(unsigned int ioaddr, unsigned data);
-static int mii_getbit(unsigned int ioaddr);
-static void mii_wbits(unsigned int ioaddr, unsigned data, int len);
-static unsigned mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg);
-static void mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg,
- unsigned data, int len);
-
-static int has_ce2_string(struct pcmcia_device * link);
-static int xirc2ps_config(struct pcmcia_device * link);
-static void xirc2ps_release(struct pcmcia_device * link);
-static void xirc2ps_detach(struct pcmcia_device *p_dev);
-
-static irqreturn_t xirc2ps_interrupt(int irq, void *dev_id);
-
-typedef struct local_info_t {
- struct net_device *dev;
- struct pcmcia_device *p_dev;
-
- int card_type;
- int probe_port;
- int silicon; /* silicon revision. 0=old CE2, 1=Scipper, 4=Mohawk */
- int mohawk; /* a CE3 type card */
- int dingo; /* a CEM56 type card */
- int new_mii; /* has full 10baseT/100baseT MII */
- int modem; /* is a multi function card (i.e with a modem) */
- void __iomem *dingo_ccr; /* only used for CEM56 cards */
- unsigned last_ptr_value; /* last packets transmitted value */
- const char *manf_str;
- struct work_struct tx_timeout_task;
-} local_info_t;
-
-/****************
- * Some more prototypes
- */
-static netdev_tx_t do_start_xmit(struct sk_buff *skb,
- struct net_device *dev);
-static void xirc_tx_timeout(struct net_device *dev);
-static void xirc2ps_tx_timeout_task(struct work_struct *work);
-static void set_addresses(struct net_device *dev);
-static void set_multicast_list(struct net_device *dev);
-static int set_card_type(struct pcmcia_device *link);
-static int do_config(struct net_device *dev, struct ifmap *map);
-static int do_open(struct net_device *dev);
-static int do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd);
-static const struct ethtool_ops netdev_ethtool_ops;
-static void hardreset(struct net_device *dev);
-static void do_reset(struct net_device *dev, int full);
-static int init_mii(struct net_device *dev);
-static void do_powerdown(struct net_device *dev);
-static int do_stop(struct net_device *dev);
-
-/*=============== Helper functions =========================*/
-#define SelectPage(pgnr) outb((pgnr), ioaddr + XIRCREG_PR)
-#define GetByte(reg) ((unsigned)inb(ioaddr + (reg)))
-#define GetWord(reg) ((unsigned)inw(ioaddr + (reg)))
-#define PutByte(reg,value) outb((value), ioaddr+(reg))
-#define PutWord(reg,value) outw((value), ioaddr+(reg))
-
-/*====== Functions used for debugging =================================*/
-#if 0 /* reading regs may change system status */
-static void
-PrintRegisters(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
-
- if (pc_debug > 1) {
- int i, page;
-
- printk(KERN_DEBUG pr_fmt("Register common: "));
- for (i = 0; i < 8; i++)
- pr_cont(" %2.2x", GetByte(i));
- pr_cont("\n");
- for (page = 0; page <= 8; page++) {
- printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
- SelectPage(page);
- for (i = 8; i < 16; i++)
- pr_cont(" %2.2x", GetByte(i));
- pr_cont("\n");
- }
- for (page=0x40 ; page <= 0x5f; page++) {
- if (page == 0x43 || (page >= 0x46 && page <= 0x4f) ||
- (page >= 0x51 && page <=0x5e))
- continue;
- printk(KERN_DEBUG pr_fmt("Register page %2x: "), page);
- SelectPage(page);
- for (i = 8; i < 16; i++)
- pr_cont(" %2.2x", GetByte(i));
- pr_cont("\n");
- }
- }
-}
-#endif /* 0 */
-
-/*============== MII Management functions ===============*/
-
-/****************
- * Turn around for read
- */
-static void
-mii_idle(unsigned int ioaddr)
-{
- PutByte(XIRCREG2_GPR2, 0x04|0); /* drive MDCK low */
- udelay(1);
- PutByte(XIRCREG2_GPR2, 0x04|1); /* and drive MDCK high */
- udelay(1);
-}
-
-/****************
- * Write a bit to MDI/O
- */
-static void
-mii_putbit(unsigned int ioaddr, unsigned data)
-{
- #if 1
- if (data) {
- PutByte(XIRCREG2_GPR2, 0x0c|2|0); /* set MDIO */
- udelay(1);
- PutByte(XIRCREG2_GPR2, 0x0c|2|1); /* and drive MDCK high */
- udelay(1);
- } else {
- PutByte(XIRCREG2_GPR2, 0x0c|0|0); /* clear MDIO */
- udelay(1);
- PutByte(XIRCREG2_GPR2, 0x0c|0|1); /* and drive MDCK high */
- udelay(1);
- }
- #else
- if (data) {
- PutWord(XIRCREG2_GPR2-1, 0x0e0e);
- udelay(1);
- PutWord(XIRCREG2_GPR2-1, 0x0f0f);
- udelay(1);
- } else {
- PutWord(XIRCREG2_GPR2-1, 0x0c0c);
- udelay(1);
- PutWord(XIRCREG2_GPR2-1, 0x0d0d);
- udelay(1);
- }
- #endif
-}
-
-/****************
- * Get a bit from MDI/O
- */
-static int
-mii_getbit(unsigned int ioaddr)
-{
- unsigned d;
-
- PutByte(XIRCREG2_GPR2, 4|0); /* drive MDCK low */
- udelay(1);
- d = GetByte(XIRCREG2_GPR2); /* read MDIO */
- PutByte(XIRCREG2_GPR2, 4|1); /* drive MDCK high again */
- udelay(1);
- return d & 0x20; /* read MDIO */
-}
-
-static void
-mii_wbits(unsigned int ioaddr, unsigned data, int len)
-{
- unsigned m = 1 << (len-1);
- for (; m; m >>= 1)
- mii_putbit(ioaddr, data & m);
-}
-
-static unsigned
-mii_rd(unsigned int ioaddr, u_char phyaddr, u_char phyreg)
-{
- int i;
- unsigned data=0, m;
-
- SelectPage(2);
- for (i=0; i < 32; i++) /* 32 bit preamble */
- mii_putbit(ioaddr, 1);
- mii_wbits(ioaddr, 0x06, 4); /* Start and opcode for read */
- mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
- mii_wbits(ioaddr, phyreg, 5); /* PHY register to read */
- mii_idle(ioaddr); /* turn around */
- mii_getbit(ioaddr);
-
- for (m = 1<<15; m; m >>= 1)
- if (mii_getbit(ioaddr))
- data |= m;
- mii_idle(ioaddr);
- return data;
-}
-
-static void
-mii_wr(unsigned int ioaddr, u_char phyaddr, u_char phyreg, unsigned data,
- int len)
-{
- int i;
-
- SelectPage(2);
- for (i=0; i < 32; i++) /* 32 bit preamble */
- mii_putbit(ioaddr, 1);
- mii_wbits(ioaddr, 0x05, 4); /* Start and opcode for write */
- mii_wbits(ioaddr, phyaddr, 5); /* PHY address to be accessed */
- mii_wbits(ioaddr, phyreg, 5); /* PHY Register to write */
- mii_putbit(ioaddr, 1); /* turn around */
- mii_putbit(ioaddr, 0);
- mii_wbits(ioaddr, data, len); /* And write the data */
- mii_idle(ioaddr);
-}
-
-/*============= Main bulk of functions =========================*/
-
-static const struct net_device_ops netdev_ops = {
- .ndo_open = do_open,
- .ndo_stop = do_stop,
- .ndo_start_xmit = do_start_xmit,
- .ndo_tx_timeout = xirc_tx_timeout,
- .ndo_set_config = do_config,
- .ndo_do_ioctl = do_ioctl,
- .ndo_set_multicast_list = set_multicast_list,
- .ndo_change_mtu = eth_change_mtu,
- .ndo_set_mac_address = eth_mac_addr,
- .ndo_validate_addr = eth_validate_addr,
-};
-
-static int
-xirc2ps_probe(struct pcmcia_device *link)
-{
- struct net_device *dev;
- local_info_t *local;
-
- dev_dbg(&link->dev, "attach()\n");
-
- /* Allocate the device structure */
- dev = alloc_etherdev(sizeof(local_info_t));
- if (!dev)
- return -ENOMEM;
- local = netdev_priv(dev);
- local->dev = dev;
- local->p_dev = link;
- link->priv = dev;
-
- /* General socket configuration */
- link->config_index = 1;
-
- /* Fill in card specific entries */
- dev->netdev_ops = &netdev_ops;
- dev->ethtool_ops = &netdev_ethtool_ops;
- dev->watchdog_timeo = TX_TIMEOUT;
- INIT_WORK(&local->tx_timeout_task, xirc2ps_tx_timeout_task);
-
- return xirc2ps_config(link);
-} /* xirc2ps_attach */
-
-static void
-xirc2ps_detach(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- dev_dbg(&link->dev, "detach\n");
-
- unregister_netdev(dev);
-
- xirc2ps_release(link);
-
- free_netdev(dev);
-} /* xirc2ps_detach */
-
-/****************
- * Detect the type of the card. s is the buffer with the data of tuple 0x20
- * Returns: 0 := not supported
- * mediaid=11 and prodid=47
- * Media-Id bits:
- * Ethernet 0x01
- * Tokenring 0x02
- * Arcnet 0x04
- * Wireless 0x08
- * Modem 0x10
- * GSM only 0x20
- * Prod-Id bits:
- * Pocket 0x10
- * External 0x20
- * Creditcard 0x40
- * Cardbus 0x80
- *
- */
-static int
-set_card_type(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
- local_info_t *local = netdev_priv(dev);
- u8 *buf;
- unsigned int cisrev, mediaid, prodid;
- size_t len;
-
- len = pcmcia_get_tuple(link, CISTPL_MANFID, &buf);
- if (len < 5) {
- dev_err(&link->dev, "invalid CIS -- sorry\n");
- return 0;
- }
-
- cisrev = buf[2];
- mediaid = buf[3];
- prodid = buf[4];
-
- dev_dbg(&link->dev, "cisrev=%02x mediaid=%02x prodid=%02x\n",
- cisrev, mediaid, prodid);
-
- local->mohawk = 0;
- local->dingo = 0;
- local->modem = 0;
- local->card_type = XIR_UNKNOWN;
- if (!(prodid & 0x40)) {
- pr_notice("Oops: Not a creditcard\n");
- return 0;
- }
- if (!(mediaid & 0x01)) {
- pr_notice("Not an Ethernet card\n");
- return 0;
- }
- if (mediaid & 0x10) {
- local->modem = 1;
- switch(prodid & 15) {
- case 1: local->card_type = XIR_CEM ; break;
- case 2: local->card_type = XIR_CEM2 ; break;
- case 3: local->card_type = XIR_CEM3 ; break;
- case 4: local->card_type = XIR_CEM33 ; break;
- case 5: local->card_type = XIR_CEM56M;
- local->mohawk = 1;
- break;
- case 6:
- case 7: /* 7 is the RealPort 10/56 */
- local->card_type = XIR_CEM56 ;
- local->mohawk = 1;
- local->dingo = 1;
- break;
- }
- } else {
- switch(prodid & 15) {
- case 1: local->card_type = has_ce2_string(link)? XIR_CE2 : XIR_CE ;
- break;
- case 2: local->card_type = XIR_CE2; break;
- case 3: local->card_type = XIR_CE3;
- local->mohawk = 1;
- break;
- }
- }
- if (local->card_type == XIR_CE || local->card_type == XIR_CEM) {
- pr_notice("Sorry, this is an old CE card\n");
- return 0;
- }
- if (local->card_type == XIR_UNKNOWN)
- pr_notice("unknown card (mediaid=%02x prodid=%02x)\n", mediaid, prodid);
-
- return 1;
-}
-
-/****************
- * There are some CE2 cards out which claim to be a CE card.
- * This function looks for a "CE2" in the 3rd version field.
- * Returns: true if this is a CE2
- */
-static int
-has_ce2_string(struct pcmcia_device * p_dev)
-{
- if (p_dev->prod_id[2] && strstr(p_dev->prod_id[2], "CE2"))
- return 1;
- return 0;
-}
-
-static int
-xirc2ps_config_modem(struct pcmcia_device *p_dev, void *priv_data)
-{
- unsigned int ioaddr;
-
- if ((p_dev->resource[0]->start & 0xf) == 8)
- return -ENODEV;
-
- p_dev->resource[0]->end = 16;
- p_dev->resource[1]->end = 8;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->io_lines = 10;
-
- p_dev->resource[1]->start = p_dev->resource[0]->start;
- for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- p_dev->resource[0]->start = ioaddr;
- if (!pcmcia_request_io(p_dev))
- return 0;
- }
- return -ENODEV;
-}
-
-static int
-xirc2ps_config_check(struct pcmcia_device *p_dev, void *priv_data)
-{
- int *pass = priv_data;
- resource_size_t tmp = p_dev->resource[1]->start;
-
- tmp += (*pass ? (p_dev->config_index & 0x20 ? -24 : 8)
- : (p_dev->config_index & 0x20 ? 8 : -24));
-
- if ((p_dev->resource[0]->start & 0xf) == 8)
- return -ENODEV;
-
- p_dev->resource[0]->end = 18;
- p_dev->resource[1]->end = 8;
- p_dev->resource[0]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- p_dev->resource[1]->flags &= ~IO_DATA_PATH_WIDTH;
- p_dev->resource[1]->flags |= IO_DATA_PATH_WIDTH_8;
- p_dev->io_lines = 10;
-
- p_dev->resource[1]->start = p_dev->resource[0]->start;
- p_dev->resource[0]->start = tmp;
- return pcmcia_request_io(p_dev);
-}
-
-
-static int pcmcia_get_mac_ce(struct pcmcia_device *p_dev,
- tuple_t *tuple,
- void *priv)
-{
- struct net_device *dev = priv;
- int i;
-
- if (tuple->TupleDataLen != 13)
- return -EINVAL;
- if ((tuple->TupleData[0] != 2) || (tuple->TupleData[1] != 1) ||
- (tuple->TupleData[2] != 6))
- return -EINVAL;
- /* another try (James Lehmer's CE2 version 4.1)*/
- for (i = 2; i < 6; i++)
- dev->dev_addr[i] = tuple->TupleData[i+2];
- return 0;
-};
-
-
-static int
-xirc2ps_config(struct pcmcia_device * link)
-{
- struct net_device *dev = link->priv;
- local_info_t *local = netdev_priv(dev);
- unsigned int ioaddr;
- int err;
- u8 *buf;
- size_t len;
-
- local->dingo_ccr = NULL;
-
- dev_dbg(&link->dev, "config\n");
-
- /* Is this a valid card */
- if (link->has_manf_id == 0) {
- pr_notice("manfid not found in CIS\n");
- goto failure;
- }
-
- switch (link->manf_id) {
- case MANFID_XIRCOM:
- local->manf_str = "Xircom";
- break;
- case MANFID_ACCTON:
- local->manf_str = "Accton";
- break;
- case MANFID_COMPAQ:
- case MANFID_COMPAQ2:
- local->manf_str = "Compaq";
- break;
- case MANFID_INTEL:
- local->manf_str = "Intel";
- break;
- case MANFID_TOSHIBA:
- local->manf_str = "Toshiba";
- break;
- default:
- pr_notice("Unknown Card Manufacturer ID: 0x%04x\n",
- (unsigned)link->manf_id);
- goto failure;
- }
- dev_dbg(&link->dev, "found %s card\n", local->manf_str);
-
- if (!set_card_type(link)) {
- pr_notice("this card is not supported\n");
- goto failure;
- }
-
- /* get the ethernet address from the CIS */
- err = pcmcia_get_mac_from_cis(link, dev);
-
- /* not found: try to get the node-id from tuple 0x89 */
- if (err) {
- len = pcmcia_get_tuple(link, 0x89, &buf);
- /* data layout looks like tuple 0x22 */
- if (buf && len == 8) {
- if (*buf == CISTPL_FUNCE_LAN_NODE_ID) {
- int i;
- for (i = 2; i < 6; i++)
- dev->dev_addr[i] = buf[i+2];
- } else
- err = -1;
- }
- kfree(buf);
- }
-
- if (err)
- err = pcmcia_loop_tuple(link, CISTPL_FUNCE, pcmcia_get_mac_ce, dev);
-
- if (err) {
- pr_notice("node-id not found in CIS\n");
- goto failure;
- }
-
- if (local->modem) {
- int pass;
- link->config_flags |= CONF_AUTO_SET_IO;
-
- if (local->dingo) {
- /* Take the Modem IO port from the CIS and scan for a free
- * Ethernet port */
- if (!pcmcia_loop_config(link, xirc2ps_config_modem, NULL))
- goto port_found;
- } else {
- /* We do 2 passes here: The first one uses the regular mapping and
- * the second tries again, thereby considering that the 32 ports are
- * mirrored every 32 bytes. Actually we use a mirrored port for
- * the Mako if (on the first pass) the COR bit 5 is set.
- */
- for (pass=0; pass < 2; pass++)
- if (!pcmcia_loop_config(link, xirc2ps_config_check,
- &pass))
- goto port_found;
- /* if special option:
- * try to configure as Ethernet only.
- * .... */
- }
- pr_notice("no ports available\n");
- } else {
- link->io_lines = 10;
- link->resource[0]->end = 16;
- link->resource[0]->flags |= IO_DATA_PATH_WIDTH_16;
- for (ioaddr = 0x300; ioaddr < 0x400; ioaddr += 0x10) {
- link->resource[0]->start = ioaddr;
- if (!(err = pcmcia_request_io(link)))
- goto port_found;
- }
- link->resource[0]->start = 0; /* let CS decide */
- if ((err = pcmcia_request_io(link)))
- goto config_error;
- }
- port_found:
- if (err)
- goto config_error;
-
- /****************
- * Now allocate an interrupt line. Note that this does not
- * actually assign a handler to the interrupt.
- */
- if ((err=pcmcia_request_irq(link, xirc2ps_interrupt)))
- goto config_error;
-
- link->config_flags |= CONF_ENABLE_IRQ;
- if (do_sound)
- link->config_flags |= CONF_ENABLE_SPKR;
-
- if ((err = pcmcia_enable_device(link)))
- goto config_error;
-
- if (local->dingo) {
- /* Reset the modem's BAR to the correct value
- * This is necessary because in the RequestConfiguration call,
- * the base address of the ethernet port (BasePort1) is written
- * to the BAR registers of the modem.
- */
- err = pcmcia_write_config_byte(link, CISREG_IOBASE_0, (u8)
- link->resource[1]->start & 0xff);
- if (err)
- goto config_error;
-
- err = pcmcia_write_config_byte(link, CISREG_IOBASE_1,
- (link->resource[1]->start >> 8) & 0xff);
- if (err)
- goto config_error;
-
- /* There is no config entry for the Ethernet part which
- * is at 0x0800. So we allocate a window into the attribute
- * memory and write direct to the CIS registers
- */
- link->resource[2]->flags = WIN_DATA_WIDTH_8 | WIN_MEMORY_TYPE_AM |
- WIN_ENABLE;
- link->resource[2]->start = link->resource[2]->end = 0;
- if ((err = pcmcia_request_window(link, link->resource[2], 0)))
- goto config_error;
-
- local->dingo_ccr = ioremap(link->resource[2]->start, 0x1000) + 0x0800;
- if ((err = pcmcia_map_mem_page(link, link->resource[2], 0)))
- goto config_error;
-
- /* Setup the CCRs; there are no infos in the CIS about the Ethernet
- * part.
- */
- writeb(0x47, local->dingo_ccr + CISREG_COR);
- ioaddr = link->resource[0]->start;
- writeb(ioaddr & 0xff , local->dingo_ccr + CISREG_IOBASE_0);
- writeb((ioaddr >> 8)&0xff , local->dingo_ccr + CISREG_IOBASE_1);
-
- #if 0
- {
- u_char tmp;
- pr_info("ECOR:");
- for (i=0; i < 7; i++) {
- tmp = readb(local->dingo_ccr + i*2);
- pr_cont(" %02x", tmp);
- }
- pr_cont("\n");
- pr_info("DCOR:");
- for (i=0; i < 4; i++) {
- tmp = readb(local->dingo_ccr + 0x20 + i*2);
- pr_cont(" %02x", tmp);
- }
- pr_cont("\n");
- pr_info("SCOR:");
- for (i=0; i < 10; i++) {
- tmp = readb(local->dingo_ccr + 0x40 + i*2);
- pr_cont(" %02x", tmp);
- }
- pr_cont("\n");
- }
- #endif
-
- writeb(0x01, local->dingo_ccr + 0x20);
- writeb(0x0c, local->dingo_ccr + 0x22);
- writeb(0x00, local->dingo_ccr + 0x24);
- writeb(0x00, local->dingo_ccr + 0x26);
- writeb(0x00, local->dingo_ccr + 0x28);
- }
-
- /* The if_port symbol can be set when the module is loaded */
- local->probe_port=0;
- if (!if_port) {
- local->probe_port = dev->if_port = 1;
- } else if ((if_port >= 1 && if_port <= 2) ||
- (local->mohawk && if_port==4))
- dev->if_port = if_port;
- else
- pr_notice("invalid if_port requested\n");
-
- /* we can now register the device with the net subsystem */
- dev->irq = link->irq;
- dev->base_addr = link->resource[0]->start;
-
- if (local->dingo)
- do_reset(dev, 1); /* a kludge to make the cem56 work */
-
- SET_NETDEV_DEV(dev, &link->dev);
-
- if ((err=register_netdev(dev))) {
- pr_notice("register_netdev() failed\n");
- goto config_error;
- }
-
- /* give some infos about the hardware */
- netdev_info(dev, "%s: port %#3lx, irq %d, hwaddr %pM\n",
- local->manf_str, (u_long)dev->base_addr, (int)dev->irq,
- dev->dev_addr);
-
- return 0;
-
- config_error:
- xirc2ps_release(link);
- return -ENODEV;
-
- failure:
- return -ENODEV;
-} /* xirc2ps_config */
-
-static void
-xirc2ps_release(struct pcmcia_device *link)
-{
- dev_dbg(&link->dev, "release\n");
-
- if (link->resource[2]->end) {
- struct net_device *dev = link->priv;
- local_info_t *local = netdev_priv(dev);
- if (local->dingo)
- iounmap(local->dingo_ccr - 0x0800);
- }
- pcmcia_disable_device(link);
-} /* xirc2ps_release */
-
-/*====================================================================*/
-
-
-static int xirc2ps_suspend(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open) {
- netif_device_detach(dev);
- do_powerdown(dev);
- }
-
- return 0;
-}
-
-static int xirc2ps_resume(struct pcmcia_device *link)
-{
- struct net_device *dev = link->priv;
-
- if (link->open) {
- do_reset(dev,1);
- netif_device_attach(dev);
- }
-
- return 0;
-}
-
-
-/*====================================================================*/
-
-/****************
- * This is the Interrupt service route.
- */
-static irqreturn_t
-xirc2ps_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- local_info_t *lp = netdev_priv(dev);
- unsigned int ioaddr;
- u_char saved_page;
- unsigned bytes_rcvd;
- unsigned int_status, eth_status, rx_status, tx_status;
- unsigned rsr, pktlen;
- ulong start_ticks = jiffies; /* fixme: jiffies rollover every 497 days
- * is this something to worry about?
- * -- on a laptop?
- */
-
- if (!netif_device_present(dev))
- return IRQ_HANDLED;
-
- ioaddr = dev->base_addr;
- if (lp->mohawk) { /* must disable the interrupt */
- PutByte(XIRCREG_CR, 0);
- }
-
- pr_debug("%s: interrupt %d at %#x.\n", dev->name, irq, ioaddr);
-
- saved_page = GetByte(XIRCREG_PR);
- /* Read the ISR to see whats the cause for the interrupt.
- * This also clears the interrupt flags on CE2 cards
- */
- int_status = GetByte(XIRCREG_ISR);
- bytes_rcvd = 0;
- loop_entry:
- if (int_status == 0xff) { /* card may be ejected */
- pr_debug("%s: interrupt %d for dead card\n", dev->name, irq);
- goto leave;
- }
- eth_status = GetByte(XIRCREG_ESR);
-
- SelectPage(0x40);
- rx_status = GetByte(XIRCREG40_RXST0);
- PutByte(XIRCREG40_RXST0, (~rx_status & 0xff));
- tx_status = GetByte(XIRCREG40_TXST0);
- tx_status |= GetByte(XIRCREG40_TXST1) << 8;
- PutByte(XIRCREG40_TXST0, 0);
- PutByte(XIRCREG40_TXST1, 0);
-
- pr_debug("%s: ISR=%#2.2x ESR=%#2.2x RSR=%#2.2x TSR=%#4.4x\n",
- dev->name, int_status, eth_status, rx_status, tx_status);
-
- /***** receive section ******/
- SelectPage(0);
- while (eth_status & FullPktRcvd) {
- rsr = GetByte(XIRCREG0_RSR);
- if (bytes_rcvd > maxrx_bytes && (rsr & PktRxOk)) {
- /* too many bytes received during this int, drop the rest of the
- * packets */
- dev->stats.rx_dropped++;
- pr_debug("%s: RX drop, too much done\n", dev->name);
- } else if (rsr & PktRxOk) {
- struct sk_buff *skb;
-
- pktlen = GetWord(XIRCREG0_RBC);
- bytes_rcvd += pktlen;
-
- pr_debug("rsr=%#02x packet_length=%u\n", rsr, pktlen);
-
- skb = dev_alloc_skb(pktlen+3); /* 1 extra so we can use insw */
- if (!skb) {
- pr_notice("low memory, packet dropped (size=%u)\n", pktlen);
- dev->stats.rx_dropped++;
- } else { /* okay get the packet */
- skb_reserve(skb, 2);
- if (lp->silicon == 0 ) { /* work around a hardware bug */
- unsigned rhsa; /* receive start address */
-
- SelectPage(5);
- rhsa = GetWord(XIRCREG5_RHSA0);
- SelectPage(0);
- rhsa += 3; /* skip control infos */
- if (rhsa >= 0x8000)
- rhsa = 0;
- if (rhsa + pktlen > 0x8000) {
- unsigned i;
- u_char *buf = skb_put(skb, pktlen);
- for (i=0; i < pktlen ; i++, rhsa++) {
- buf[i] = GetByte(XIRCREG_EDP);
- if (rhsa == 0x8000) {
- rhsa = 0;
- i--;
- }
- }
- } else {
- insw(ioaddr+XIRCREG_EDP,
- skb_put(skb, pktlen), (pktlen+1)>>1);
- }
- }
- #if 0
- else if (lp->mohawk) {
- /* To use this 32 bit access we should use
- * a manual optimized loop
- * Also the words are swapped, we can get more
- * performance by using 32 bit access and swapping
- * the words in a register. Will need this for cardbus
- *
- * Note: don't forget to change the ALLOC_SKB to .. +3
- */
- unsigned i;
- u_long *p = skb_put(skb, pktlen);
- register u_long a;
- unsigned int edpreg = ioaddr+XIRCREG_EDP-2;
- for (i=0; i < len ; i += 4, p++) {
- a = inl(edpreg);
- __asm__("rorl $16,%0\n\t"
- :"=q" (a)
- : "0" (a));
- *p = a;
- }
- }
- #endif
- else {
- insw(ioaddr+XIRCREG_EDP, skb_put(skb, pktlen),
- (pktlen+1)>>1);
- }
- skb->protocol = eth_type_trans(skb, dev);
- netif_rx(skb);
- dev->stats.rx_packets++;
- dev->stats.rx_bytes += pktlen;
- if (!(rsr & PhyPkt))
- dev->stats.multicast++;
- }
- } else { /* bad packet */
- pr_debug("rsr=%#02x\n", rsr);
- }
- if (rsr & PktTooLong) {
- dev->stats.rx_frame_errors++;
- pr_debug("%s: Packet too long\n", dev->name);
- }
- if (rsr & CRCErr) {
- dev->stats.rx_crc_errors++;
- pr_debug("%s: CRC error\n", dev->name);
- }
- if (rsr & AlignErr) {
- dev->stats.rx_fifo_errors++; /* okay ? */
- pr_debug("%s: Alignment error\n", dev->name);
- }
-
- /* clear the received/dropped/error packet */
- PutWord(XIRCREG0_DO, 0x8000); /* issue cmd: skip_rx_packet */
-
- /* get the new ethernet status */
- eth_status = GetByte(XIRCREG_ESR);
- }
- if (rx_status & 0x10) { /* Receive overrun */
- dev->stats.rx_over_errors++;
- PutByte(XIRCREG_CR, ClearRxOvrun);
- pr_debug("receive overrun cleared\n");
- }
-
- /***** transmit section ******/
- if (int_status & PktTxed) {
- unsigned n, nn;
-
- n = lp->last_ptr_value;
- nn = GetByte(XIRCREG0_PTR);
- lp->last_ptr_value = nn;
- if (nn < n) /* rollover */
- dev->stats.tx_packets += 256 - n;
- else if (n == nn) { /* happens sometimes - don't know why */
- pr_debug("PTR not changed?\n");
- } else
- dev->stats.tx_packets += lp->last_ptr_value - n;
- netif_wake_queue(dev);
- }
- if (tx_status & 0x0002) { /* Execessive collissions */
- pr_debug("tx restarted due to execssive collissions\n");
- PutByte(XIRCREG_CR, RestartTx); /* restart transmitter process */
- }
- if (tx_status & 0x0040)
- dev->stats.tx_aborted_errors++;
-
- /* recalculate our work chunk so that we limit the duration of this
- * ISR to about 1/10 of a second.
- * Calculate only if we received a reasonable amount of bytes.
- */
- if (bytes_rcvd > 1000) {
- u_long duration = jiffies - start_ticks;
-
- if (duration >= HZ/10) { /* if more than about 1/10 second */
- maxrx_bytes = (bytes_rcvd * (HZ/10)) / duration;
- if (maxrx_bytes < 2000)
- maxrx_bytes = 2000;
- else if (maxrx_bytes > 22000)
- maxrx_bytes = 22000;
- pr_debug("set maxrx=%u (rcvd=%u ticks=%lu)\n",
- maxrx_bytes, bytes_rcvd, duration);
- } else if (!duration && maxrx_bytes < 22000) {
- /* now much faster */
- maxrx_bytes += 2000;
- if (maxrx_bytes > 22000)
- maxrx_bytes = 22000;
- pr_debug("set maxrx=%u\n", maxrx_bytes);
- }
- }
-
- leave:
- if (lockup_hack) {
- if (int_status != 0xff && (int_status = GetByte(XIRCREG_ISR)) != 0)
- goto loop_entry;
- }
- SelectPage(saved_page);
- PutByte(XIRCREG_CR, EnableIntr); /* re-enable interrupts */
- /* Instead of dropping packets during a receive, we could
- * force an interrupt with this command:
- * PutByte(XIRCREG_CR, EnableIntr|ForceIntr);
- */
- return IRQ_HANDLED;
-} /* xirc2ps_interrupt */
-
-/*====================================================================*/
-
-static void
-xirc2ps_tx_timeout_task(struct work_struct *work)
-{
- local_info_t *local =
- container_of(work, local_info_t, tx_timeout_task);
- struct net_device *dev = local->dev;
- /* reset the card */
- do_reset(dev,1);
- dev->trans_start = jiffies; /* prevent tx timeout */
- netif_wake_queue(dev);
-}
-
-static void
-xirc_tx_timeout(struct net_device *dev)
-{
- local_info_t *lp = netdev_priv(dev);
- dev->stats.tx_errors++;
- netdev_notice(dev, "transmit timed out\n");
- schedule_work(&lp->tx_timeout_task);
-}
-
-static netdev_tx_t
-do_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- local_info_t *lp = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- int okay;
- unsigned freespace;
- unsigned pktlen = skb->len;
-
- pr_debug("do_start_xmit(skb=%p, dev=%p) len=%u\n",
- skb, dev, pktlen);
-
-
- /* adjust the packet length to min. required
- * and hope that the buffer is large enough
- * to provide some random data.
- * fixme: For Mohawk we can change this by sending
- * a larger packetlen than we actually have; the chip will
- * pad this in his buffer with random bytes
- */
- if (pktlen < ETH_ZLEN)
- {
- if (skb_padto(skb, ETH_ZLEN))
- return NETDEV_TX_OK;
- pktlen = ETH_ZLEN;
- }
-
- netif_stop_queue(dev);
- SelectPage(0);
- PutWord(XIRCREG0_TRS, (u_short)pktlen+2);
- freespace = GetWord(XIRCREG0_TSO);
- okay = freespace & 0x8000;
- freespace &= 0x7fff;
- /* TRS doesn't work - (indeed it is eliminated with sil-rev 1) */
- okay = pktlen +2 < freespace;
- pr_debug("%s: avail. tx space=%u%s\n",
- dev->name, freespace, okay ? " (okay)":" (not enough)");
- if (!okay) { /* not enough space */
- return NETDEV_TX_BUSY; /* upper layer may decide to requeue this packet */
- }
- /* send the packet */
- PutWord(XIRCREG_EDP, (u_short)pktlen);
- outsw(ioaddr+XIRCREG_EDP, skb->data, pktlen>>1);
- if (pktlen & 1)
- PutByte(XIRCREG_EDP, skb->data[pktlen-1]);
-
- if (lp->mohawk)
- PutByte(XIRCREG_CR, TransmitPacket|EnableIntr);
-
- dev_kfree_skb (skb);
- dev->stats.tx_bytes += pktlen;
- netif_start_queue(dev);
- return NETDEV_TX_OK;
-}
-
-struct set_address_info {
- int reg_nr;
- int page_nr;
- int mohawk;
- unsigned int ioaddr;
-};
-
-static void set_address(struct set_address_info *sa_info, char *addr)
-{
- unsigned int ioaddr = sa_info->ioaddr;
- int i;
-
- for (i = 0; i < 6; i++) {
- if (sa_info->reg_nr > 15) {
- sa_info->reg_nr = 8;
- sa_info->page_nr++;
- SelectPage(sa_info->page_nr);
- }
- if (sa_info->mohawk)
- PutByte(sa_info->reg_nr++, addr[5 - i]);
- else
- PutByte(sa_info->reg_nr++, addr[i]);
- }
-}
-
-/****************
- * Set all addresses: This first one is the individual address,
- * the next 9 addresses are taken from the multicast list and
- * the rest is filled with the individual address.
- */
-static void set_addresses(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- local_info_t *lp = netdev_priv(dev);
- struct netdev_hw_addr *ha;
- struct set_address_info sa_info;
- int i;
-
- /*
- * Setup the info structure so that by first set_address call it will do
- * SelectPage with the right page number. Hence these ones here.
- */
- sa_info.reg_nr = 15 + 1;
- sa_info.page_nr = 0x50 - 1;
- sa_info.mohawk = lp->mohawk;
- sa_info.ioaddr = ioaddr;
-
- set_address(&sa_info, dev->dev_addr);
- i = 0;
- netdev_for_each_mc_addr(ha, dev) {
- if (i++ == 9)
- break;
- set_address(&sa_info, ha->addr);
- }
- while (i++ < 9)
- set_address(&sa_info, dev->dev_addr);
- SelectPage(0);
-}
-
-/****************
- * Set or clear the multicast filter for this adaptor.
- * We can filter up to 9 addresses, if more are requested we set
- * multicast promiscuous mode.
- */
-
-static void
-set_multicast_list(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- unsigned value;
-
- SelectPage(0x42);
- value = GetByte(XIRCREG42_SWC1) & 0xC0;
-
- if (dev->flags & IFF_PROMISC) { /* snoop */
- PutByte(XIRCREG42_SWC1, value | 0x06); /* set MPE and PME */
- } else if (netdev_mc_count(dev) > 9 || (dev->flags & IFF_ALLMULTI)) {
- PutByte(XIRCREG42_SWC1, value | 0x02); /* set MPE */
- } else if (!netdev_mc_empty(dev)) {
- /* the chip can filter 9 addresses perfectly */
- PutByte(XIRCREG42_SWC1, value | 0x01);
- SelectPage(0x40);
- PutByte(XIRCREG40_CMD0, Offline);
- set_addresses(dev);
- SelectPage(0x40);
- PutByte(XIRCREG40_CMD0, EnableRecv | Online);
- } else { /* standard usage */
- PutByte(XIRCREG42_SWC1, value | 0x00);
- }
- SelectPage(0);
-}
-
-static int
-do_config(struct net_device *dev, struct ifmap *map)
-{
- local_info_t *local = netdev_priv(dev);
-
- pr_debug("do_config(%p)\n", dev);
- if (map->port != 255 && map->port != dev->if_port) {
- if (map->port > 4)
- return -EINVAL;
- if (!map->port) {
- local->probe_port = 1;
- dev->if_port = 1;
- } else {
- local->probe_port = 0;
- dev->if_port = map->port;
- }
- netdev_info(dev, "switching to %s port\n", if_names[dev->if_port]);
- do_reset(dev,1); /* not the fine way :-) */
- }
- return 0;
-}
-
-/****************
- * Open the driver
- */
-static int
-do_open(struct net_device *dev)
-{
- local_info_t *lp = netdev_priv(dev);
- struct pcmcia_device *link = lp->p_dev;
-
- dev_dbg(&link->dev, "do_open(%p)\n", dev);
-
- /* Check that the PCMCIA card is still here. */
- /* Physical device present signature. */
- if (!pcmcia_dev_present(link))
- return -ENODEV;
-
- /* okay */
- link->open++;
-
- netif_start_queue(dev);
- do_reset(dev,1);
-
- return 0;
-}
-
-static void netdev_get_drvinfo(struct net_device *dev,
- struct ethtool_drvinfo *info)
-{
- strcpy(info->driver, "xirc2ps_cs");
- sprintf(info->bus_info, "PCMCIA 0x%lx", dev->base_addr);
-}
-
-static const struct ethtool_ops netdev_ethtool_ops = {
- .get_drvinfo = netdev_get_drvinfo,
-};
-
-static int
-do_ioctl(struct net_device *dev, struct ifreq *rq, int cmd)
-{
- local_info_t *local = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- struct mii_ioctl_data *data = if_mii(rq);
-
- pr_debug("%s: ioctl(%-.6s, %#04x) %04x %04x %04x %04x\n",
- dev->name, rq->ifr_ifrn.ifrn_name, cmd,
- data->phy_id, data->reg_num, data->val_in, data->val_out);
-
- if (!local->mohawk)
- return -EOPNOTSUPP;
-
- switch(cmd) {
- case SIOCGMIIPHY: /* Get the address of the PHY in use. */
- data->phy_id = 0; /* we have only this address */
- /* fall through */
- case SIOCGMIIREG: /* Read the specified MII register. */
- data->val_out = mii_rd(ioaddr, data->phy_id & 0x1f,
- data->reg_num & 0x1f);
- break;
- case SIOCSMIIREG: /* Write the specified MII register */
- mii_wr(ioaddr, data->phy_id & 0x1f, data->reg_num & 0x1f, data->val_in,
- 16);
- break;
- default:
- return -EOPNOTSUPP;
- }
- return 0;
-}
-
-static void
-hardreset(struct net_device *dev)
-{
- local_info_t *local = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
-
- SelectPage(4);
- udelay(1);
- PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
- msleep(40); /* wait 40 msec */
- if (local->mohawk)
- PutByte(XIRCREG4_GPR1, 1); /* set bit 0: power up */
- else
- PutByte(XIRCREG4_GPR1, 1 | 4); /* set bit 0: power up, bit 2: AIC */
- msleep(20); /* wait 20 msec */
-}
-
-static void
-do_reset(struct net_device *dev, int full)
-{
- local_info_t *local = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- unsigned value;
-
- pr_debug("%s: do_reset(%p,%d)\n", dev? dev->name:"eth?", dev, full);
-
- hardreset(dev);
- PutByte(XIRCREG_CR, SoftReset); /* set */
- msleep(20); /* wait 20 msec */
- PutByte(XIRCREG_CR, 0); /* clear */
- msleep(40); /* wait 40 msec */
- if (local->mohawk) {
- SelectPage(4);
- /* set pin GP1 and GP2 to output (0x0c)
- * set GP1 to low to power up the ML6692 (0x00)
- * set GP2 to high to power up the 10Mhz chip (0x02)
- */
- PutByte(XIRCREG4_GPR0, 0x0e);
- }
-
- /* give the circuits some time to power up */
- msleep(500); /* about 500ms */
-
- local->last_ptr_value = 0;
- local->silicon = local->mohawk ? (GetByte(XIRCREG4_BOV) & 0x70) >> 4
- : (GetByte(XIRCREG4_BOV) & 0x30) >> 4;
-
- if (local->probe_port) {
- if (!local->mohawk) {
- SelectPage(4);
- PutByte(XIRCREG4_GPR0, 4);
- local->probe_port = 0;
- }
- } else if (dev->if_port == 2) { /* enable 10Base2 */
- SelectPage(0x42);
- PutByte(XIRCREG42_SWC1, 0xC0);
- } else { /* enable 10BaseT */
- SelectPage(0x42);
- PutByte(XIRCREG42_SWC1, 0x80);
- }
- msleep(40); /* wait 40 msec to let it complete */
-
- #if 0
- {
- SelectPage(0);
- value = GetByte(XIRCREG_ESR); /* read the ESR */
- pr_debug("%s: ESR is: %#02x\n", dev->name, value);
- }
- #endif
-
- /* setup the ECR */
- SelectPage(1);
- PutByte(XIRCREG1_IMR0, 0xff); /* allow all ints */
- PutByte(XIRCREG1_IMR1, 1 ); /* and Set TxUnderrunDetect */
- value = GetByte(XIRCREG1_ECR);
- #if 0
- if (local->mohawk)
- value |= DisableLinkPulse;
- PutByte(XIRCREG1_ECR, value);
- #endif
- pr_debug("%s: ECR is: %#02x\n", dev->name, value);
-
- SelectPage(0x42);
- PutByte(XIRCREG42_SWC0, 0x20); /* disable source insertion */
-
- if (local->silicon != 1) {
- /* set the local memory dividing line.
- * The comments in the sample code say that this is only
- * settable with the scipper version 2 which is revision 0.
- * Always for CE3 cards
- */
- SelectPage(2);
- PutWord(XIRCREG2_RBS, 0x2000);
- }
-
- if (full)
- set_addresses(dev);
-
- /* Hardware workaround:
- * The receive byte pointer after reset is off by 1 so we need
- * to move the offset pointer back to 0.
- */
- SelectPage(0);
- PutWord(XIRCREG0_DO, 0x2000); /* change offset command, off=0 */
-
- /* setup MAC IMRs and clear status registers */
- SelectPage(0x40); /* Bit 7 ... bit 0 */
- PutByte(XIRCREG40_RMASK0, 0xff); /* ROK, RAB, rsv, RO, CRC, AE, PTL, MP */
- PutByte(XIRCREG40_TMASK0, 0xff); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
- PutByte(XIRCREG40_TMASK1, 0xb0); /* rsv, rsv, PTD, EXT, rsv,rsv,rsv, rsv*/
- PutByte(XIRCREG40_RXST0, 0x00); /* ROK, RAB, REN, RO, CRC, AE, PTL, MP */
- PutByte(XIRCREG40_TXST0, 0x00); /* TOK, TAB, SQE, LL, TU, JAB, EXC, CRS */
- PutByte(XIRCREG40_TXST1, 0x00); /* TEN, rsv, PTD, EXT, retry_counter:4 */
-
- if (full && local->mohawk && init_mii(dev)) {
- if (dev->if_port == 4 || local->dingo || local->new_mii) {
- netdev_info(dev, "MII selected\n");
- SelectPage(2);
- PutByte(XIRCREG2_MSR, GetByte(XIRCREG2_MSR) | 0x08);
- msleep(20);
- } else {
- netdev_info(dev, "MII detected; using 10mbs\n");
- SelectPage(0x42);
- if (dev->if_port == 2) /* enable 10Base2 */
- PutByte(XIRCREG42_SWC1, 0xC0);
- else /* enable 10BaseT */
- PutByte(XIRCREG42_SWC1, 0x80);
- msleep(40); /* wait 40 msec to let it complete */
- }
- if (full_duplex)
- PutByte(XIRCREG1_ECR, GetByte(XIRCREG1_ECR | FullDuplex));
- } else { /* No MII */
- SelectPage(0);
- value = GetByte(XIRCREG_ESR); /* read the ESR */
- dev->if_port = (value & MediaSelect) ? 1 : 2;
- }
-
- /* configure the LEDs */
- SelectPage(2);
- if (dev->if_port == 1 || dev->if_port == 4) /* TP: Link and Activity */
- PutByte(XIRCREG2_LED, 0x3b);
- else /* Coax: Not-Collision and Activity */
- PutByte(XIRCREG2_LED, 0x3a);
-
- if (local->dingo)
- PutByte(0x0b, 0x04); /* 100 Mbit LED */
-
- /* enable receiver and put the mac online */
- if (full) {
- set_multicast_list(dev);
- SelectPage(0x40);
- PutByte(XIRCREG40_CMD0, EnableRecv | Online);
- }
-
- /* setup Ethernet IMR and enable interrupts */
- SelectPage(1);
- PutByte(XIRCREG1_IMR0, 0xff);
- udelay(1);
- SelectPage(0);
- PutByte(XIRCREG_CR, EnableIntr);
- if (local->modem && !local->dingo) { /* do some magic */
- if (!(GetByte(0x10) & 0x01))
- PutByte(0x10, 0x11); /* unmask master-int bit */
- }
-
- if (full)
- netdev_info(dev, "media %s, silicon revision %d\n",
- if_names[dev->if_port], local->silicon);
- /* We should switch back to page 0 to avoid a bug in revision 0
- * where regs with offset below 8 can't be read after an access
- * to the MAC registers */
- SelectPage(0);
-}
-
-/****************
- * Initialize the Media-Independent-Interface
- * Returns: True if we have a good MII
- */
-static int
-init_mii(struct net_device *dev)
-{
- local_info_t *local = netdev_priv(dev);
- unsigned int ioaddr = dev->base_addr;
- unsigned control, status, linkpartner;
- int i;
-
- if (if_port == 4 || if_port == 1) { /* force 100BaseT or 10BaseT */
- dev->if_port = if_port;
- local->probe_port = 0;
- return 1;
- }
-
- status = mii_rd(ioaddr, 0, 1);
- if ((status & 0xff00) != 0x7800)
- return 0; /* No MII */
-
- local->new_mii = (mii_rd(ioaddr, 0, 2) != 0xffff);
-
- if (local->probe_port)
- control = 0x1000; /* auto neg */
- else if (dev->if_port == 4)
- control = 0x2000; /* no auto neg, 100mbs mode */
- else
- control = 0x0000; /* no auto neg, 10mbs mode */
- mii_wr(ioaddr, 0, 0, control, 16);
- udelay(100);
- control = mii_rd(ioaddr, 0, 0);
-
- if (control & 0x0400) {
- netdev_notice(dev, "can't take PHY out of isolation mode\n");
- local->probe_port = 0;
- return 0;
- }
-
- if (local->probe_port) {
- /* according to the DP83840A specs the auto negotiation process
- * may take up to 3.5 sec, so we use this also for our ML6692
- * Fixme: Better to use a timer here!
- */
- for (i=0; i < 35; i++) {
- msleep(100); /* wait 100 msec */
- status = mii_rd(ioaddr, 0, 1);
- if ((status & 0x0020) && (status & 0x0004))
- break;
- }
-
- if (!(status & 0x0020)) {
- netdev_info(dev, "autonegotiation failed; using 10mbs\n");
- if (!local->new_mii) {
- control = 0x0000;
- mii_wr(ioaddr, 0, 0, control, 16);
- udelay(100);
- SelectPage(0);
- dev->if_port = (GetByte(XIRCREG_ESR) & MediaSelect) ? 1 : 2;
- }
- } else {
- linkpartner = mii_rd(ioaddr, 0, 5);
- netdev_info(dev, "MII link partner: %04x\n", linkpartner);
- if (linkpartner & 0x0080) {
- dev->if_port = 4;
- } else
- dev->if_port = 1;
- }
- }
-
- return 1;
-}
-
-static void
-do_powerdown(struct net_device *dev)
-{
-
- unsigned int ioaddr = dev->base_addr;
-
- pr_debug("do_powerdown(%p)\n", dev);
-
- SelectPage(4);
- PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
- SelectPage(0);
-}
-
-static int
-do_stop(struct net_device *dev)
-{
- unsigned int ioaddr = dev->base_addr;
- local_info_t *lp = netdev_priv(dev);
- struct pcmcia_device *link = lp->p_dev;
-
- dev_dbg(&link->dev, "do_stop(%p)\n", dev);
-
- if (!link)
- return -ENODEV;
-
- netif_stop_queue(dev);
-
- SelectPage(0);
- PutByte(XIRCREG_CR, 0); /* disable interrupts */
- SelectPage(0x01);
- PutByte(XIRCREG1_IMR0, 0x00); /* forbid all ints */
- SelectPage(4);
- PutByte(XIRCREG4_GPR1, 0); /* clear bit 0: power down */
- SelectPage(0);
-
- link->open--;
- return 0;
-}
-
-static const struct pcmcia_device_id xirc2ps_ids[] = {
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0089, 0x110a),
- PCMCIA_PFC_DEVICE_MANF_CARD(0, 0x0138, 0x110a),
- PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM28", 0x2e3ee845, 0x0ea978ea),
- PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM33", 0x2e3ee845, 0x80609023),
- PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "CEM56", 0x2e3ee845, 0xa650c32a),
- PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "REM10", 0x2e3ee845, 0x76df1d29),
- PCMCIA_PFC_DEVICE_PROD_ID13(0, "Xircom", "XEM5600", 0x2e3ee845, 0xf1403719),
- PCMCIA_PFC_DEVICE_PROD_ID12(0, "Xircom", "CreditCard Ethernet+Modem II", 0x2e3ee845, 0xeca401bf),
- PCMCIA_DEVICE_MANF_CARD(0x01bf, 0x010a),
- PCMCIA_DEVICE_PROD_ID13("Toshiba Information Systems", "TPCENET", 0x1b3b94fe, 0xf381c1a2),
- PCMCIA_DEVICE_PROD_ID13("Xircom", "CE3-10/100", 0x2e3ee845, 0x0ec0ac37),
- PCMCIA_DEVICE_PROD_ID13("Xircom", "PS-CE2-10", 0x2e3ee845, 0x947d9073),
- PCMCIA_DEVICE_PROD_ID13("Xircom", "R2E-100BTX", 0x2e3ee845, 0x2464a6e3),
- PCMCIA_DEVICE_PROD_ID13("Xircom", "RE-10", 0x2e3ee845, 0x3e08d609),
- PCMCIA_DEVICE_PROD_ID13("Xircom", "XE2000", 0x2e3ee845, 0xf7188e46),
- PCMCIA_DEVICE_PROD_ID12("Compaq", "Ethernet LAN Card", 0x54f7c49c, 0x9fd2f0a2),
- PCMCIA_DEVICE_PROD_ID12("Compaq", "Netelligent 10/100 PC Card", 0x54f7c49c, 0xefe96769),
- PCMCIA_DEVICE_PROD_ID12("Intel", "EtherExpress(TM) PRO/100 PC Card Mobile Adapter16", 0x816cc815, 0x174397db),
- PCMCIA_DEVICE_PROD_ID12("Toshiba", "10/100 Ethernet PC Card", 0x44a09d9c, 0xb44deecf),
- /* also matches CFE-10 cards! */
- /* PCMCIA_DEVICE_MANF_CARD(0x0105, 0x010a), */
- PCMCIA_DEVICE_NULL,
-};
-MODULE_DEVICE_TABLE(pcmcia, xirc2ps_ids);
-
-
-static struct pcmcia_driver xirc2ps_cs_driver = {
- .owner = THIS_MODULE,
- .name = "xirc2ps_cs",
- .probe = xirc2ps_probe,
- .remove = xirc2ps_detach,
- .id_table = xirc2ps_ids,
- .suspend = xirc2ps_suspend,
- .resume = xirc2ps_resume,
-};
-
-static int __init
-init_xirc2ps_cs(void)
-{
- return pcmcia_register_driver(&xirc2ps_cs_driver);
-}
-
-static void __exit
-exit_xirc2ps_cs(void)
-{
- pcmcia_unregister_driver(&xirc2ps_cs_driver);
-}
-
-module_init(init_xirc2ps_cs);
-module_exit(exit_xirc2ps_cs);
-
-#ifndef MODULE
-static int __init setup_xirc2ps_cs(char *str)
-{
- /* if_port, full_duplex, do_sound, lockup_hack
- */
- int ints[10] = { -1 };
-
- str = get_options(str, 9, ints);
-
-#define MAYBE_SET(X,Y) if (ints[0] >= Y && ints[Y] != -1) { X = ints[Y]; }
- MAYBE_SET(if_port, 3);
- MAYBE_SET(full_duplex, 4);
- MAYBE_SET(do_sound, 5);
- MAYBE_SET(lockup_hack, 6);
-#undef MAYBE_SET
-
- return 1;
-}
-
-__setup("xirc2ps_cs=", setup_xirc2ps_cs);
-#endif