summaryrefslogtreecommitdiff
path: root/drivers/net/qla3xxx.c
diff options
context:
space:
mode:
authorJeff Garzik <jeff@garzik.org>2007-10-03 13:52:23 -0400
committerDavid S. Miller <davem@sunset.davemloft.net>2007-10-10 16:54:29 -0700
commit9ddf7774b9d760dc3fa4d5ae7d7fd92d4c02150b (patch)
treea124a3a14b636ef761db0f4bd3b708588c643882 /drivers/net/qla3xxx.c
parent07c2c76e27e629fb5c9a539e249906802866abb8 (diff)
drivers/net/qla3xxx: trim trailing whitespace
Also, hopefully, change the file permissions to 0644. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers/net/qla3xxx.c')
-rw-r--r--[-rwxr-xr-x]drivers/net/qla3xxx.c128
1 files changed, 64 insertions, 64 deletions
diff --git a/drivers/net/qla3xxx.c b/drivers/net/qla3xxx.c
index 48069ece4e51..30adf726743c 100755..100644
--- a/drivers/net/qla3xxx.c
+++ b/drivers/net/qla3xxx.c
@@ -81,7 +81,7 @@ typedef enum {
} PHY_DEVICE_et;
typedef struct {
- PHY_DEVICE_et phyDevice;
+ PHY_DEVICE_et phyDevice;
u32 phyIdOUI;
u16 phyIdModel;
char *name;
@@ -330,7 +330,7 @@ static void ql_release_to_lrg_buf_free_list(struct ql3_adapter *qdev,
PCI_DMA_FROMDEVICE);
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
qdev->ndev->name, err);
dev_kfree_skb(lrg_buf_cb->skb);
lrg_buf_cb->skb = NULL;
@@ -884,14 +884,14 @@ static void ql_petbi_start_neg_ex(struct ql3_adapter *qdev)
u16 reg;
/* Enable Auto-negotiation sense */
- ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg,
+ ql_mii_read_reg_ex(qdev, PETBI_TBI_CTRL, &reg,
PHYAddr[qdev->mac_index]);
reg |= PETBI_TBI_AUTO_SENSE;
- ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg,
+ ql_mii_write_reg_ex(qdev, PETBI_TBI_CTRL, reg,
PHYAddr[qdev->mac_index]);
ql_mii_write_reg_ex(qdev, PETBI_NEG_ADVER,
- PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX,
+ PETBI_NEG_PAUSE | PETBI_NEG_DUPLEX,
PHYAddr[qdev->mac_index]);
ql_mii_write_reg_ex(qdev, PETBI_CONTROL_REG,
@@ -945,7 +945,7 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
ql_mii_write_reg_ex(qdev, 0x10, 0x2806, miiAddr);
/* Write new PHYAD w/bit 5 set */
ql_mii_write_reg_ex(qdev, 0x11, 0x0020 | (PHYAddr[qdev->mac_index] >> 8), miiAddr);
- /*
+ /*
* Disable diagnostic mode bit 2 = 0
* Power up device bit 11 = 0
* Link up (on) and activity (blink)
@@ -955,18 +955,18 @@ static void phyAgereSpecificInit(struct ql3_adapter *qdev, u32 miiAddr)
ql_mii_write_reg(qdev, 0x1c, 0xfaf0);
}
-static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
+static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
u16 phyIdReg0, u16 phyIdReg1)
{
PHY_DEVICE_et result = PHY_TYPE_UNKNOWN;
- u32 oui;
+ u32 oui;
u16 model;
- int i;
+ int i;
if (phyIdReg0 == 0xffff) {
return result;
}
-
+
if (phyIdReg1 == 0xffff) {
return result;
}
@@ -984,7 +984,7 @@ static PHY_DEVICE_et getPhyType (struct ql3_adapter *qdev,
printk(KERN_INFO "%s: Phy: %s\n",
qdev->ndev->name, PHY_DEVICES[i].name);
-
+
break;
}
}
@@ -1033,7 +1033,7 @@ static int ql_is_full_dup(struct ql3_adapter *qdev)
{
if (ql_mii_read_reg(qdev, 0x1A, &reg))
return 0;
-
+
return ((reg & 0x0080) && (reg & 0x1000)) != 0;
}
case PHY_VITESSE_VSC8211:
@@ -1082,19 +1082,19 @@ static int PHY_Setup(struct ql3_adapter *qdev)
/* Check if we have a Agere PHY */
if ((reg1 == 0xffff) || (reg2 == 0xffff)) {
- /* Determine which MII address we should be using
+ /* Determine which MII address we should be using
determined by the index of the card */
if (qdev->mac_index == 0) {
miiAddr = MII_AGERE_ADDR_1;
} else {
miiAddr = MII_AGERE_ADDR_2;
}
-
+
err =ql_mii_read_reg_ex(qdev, PHY_ID_0_REG, &reg1, miiAddr);
if(err != 0) {
printk(KERN_ERR "%s: Could not read from reg PHY_ID_0_REG after Agere detected\n",
qdev->ndev->name);
- return err;
+ return err;
}
err = ql_mii_read_reg_ex(qdev, PHY_ID_1_REG, &reg2, miiAddr);
@@ -1103,9 +1103,9 @@ static int PHY_Setup(struct ql3_adapter *qdev)
qdev->ndev->name);
return err;
}
-
+
/* We need to remember to initialize the Agere PHY */
- agereAddrChangeNeeded = true;
+ agereAddrChangeNeeded = true;
}
/* Determine the particular PHY we have on board to apply
@@ -1114,7 +1114,7 @@ static int PHY_Setup(struct ql3_adapter *qdev)
if ((qdev->phyType == PHY_AGERE_ET1011C) && agereAddrChangeNeeded) {
/* need this here so address gets changed */
- phyAgereSpecificInit(qdev, miiAddr);
+ phyAgereSpecificInit(qdev, miiAddr);
} else if (qdev->phyType == PHY_TYPE_UNKNOWN) {
printk(KERN_ERR "%s: PHY is unknown\n", qdev->ndev->name);
return -EIO;
@@ -1427,7 +1427,7 @@ static int ql_this_adapter_controls_port(struct ql3_adapter *qdev)
static void ql_phy_reset_ex(struct ql3_adapter *qdev)
{
- ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET,
+ ql_mii_write_reg_ex(qdev, CONTROL_REG, PHY_CTRL_SOFT_RESET,
PHYAddr[qdev->mac_index]);
}
@@ -1438,7 +1438,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
if(qdev->phyType == PHY_AGERE_ET1011C) {
/* turn off external loopback */
- ql_mii_write_reg(qdev, 0x13, 0x0000);
+ ql_mii_write_reg(qdev, 0x13, 0x0000);
}
if(qdev->mac_index == 0)
@@ -1452,23 +1452,23 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
portConfiguration = PORT_CONFIG_DEFAULT;
/* Set the 1000 advertisements */
- ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg,
+ ql_mii_read_reg_ex(qdev, PHY_GIG_CONTROL, &reg,
PHYAddr[qdev->mac_index]);
reg &= ~PHY_GIG_ALL_PARAMS;
- if(portConfiguration &
+ if(portConfiguration &
PORT_CONFIG_FULL_DUPLEX_ENABLED &
PORT_CONFIG_1000MB_SPEED) {
reg |= PHY_GIG_ADV_1000F;
}
-
- if(portConfiguration &
+
+ if(portConfiguration &
PORT_CONFIG_HALF_DUPLEX_ENABLED &
PORT_CONFIG_1000MB_SPEED) {
reg |= PHY_GIG_ADV_1000H;
}
- ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
+ ql_mii_write_reg_ex(qdev, PHY_GIG_CONTROL, reg,
PHYAddr[qdev->mac_index]);
/* Set the 10/100 & pause negotiation advertisements */
@@ -1482,7 +1482,7 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
if(portConfiguration & PORT_CONFIG_FULL_DUPLEX_ENABLED) {
if(portConfiguration & PORT_CONFIG_100MB_SPEED)
reg |= PHY_NEG_ADV_100F;
-
+
if(portConfiguration & PORT_CONFIG_10MB_SPEED)
reg |= PHY_NEG_ADV_10F;
}
@@ -1490,22 +1490,22 @@ static void ql_phy_start_neg_ex(struct ql3_adapter *qdev)
if(portConfiguration & PORT_CONFIG_HALF_DUPLEX_ENABLED) {
if(portConfiguration & PORT_CONFIG_100MB_SPEED)
reg |= PHY_NEG_ADV_100H;
-
+
if(portConfiguration & PORT_CONFIG_10MB_SPEED)
reg |= PHY_NEG_ADV_10H;
}
if(portConfiguration &
PORT_CONFIG_1000MB_SPEED) {
- reg |= 1;
+ reg |= 1;
}
- ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg,
+ ql_mii_write_reg_ex(qdev, PHY_NEG_ADVER, reg,
PHYAddr[qdev->mac_index]);
ql_mii_read_reg_ex(qdev, CONTROL_REG, &reg, PHYAddr[qdev->mac_index]);
-
- ql_mii_write_reg_ex(qdev, CONTROL_REG,
+
+ ql_mii_write_reg_ex(qdev, CONTROL_REG,
reg | PHY_CTRL_RESTART_NEG | PHY_CTRL_AUTO_NEG,
PHYAddr[qdev->mac_index]);
}
@@ -1660,7 +1660,7 @@ static void ql_link_state_machine(struct ql3_adapter *qdev)
"%s: Reset in progress, skip processing link "
"state.\n", qdev->ndev->name);
- spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
+ spin_unlock_irqrestore(&qdev->hw_lock, hw_flags);
return;
}
@@ -1752,7 +1752,7 @@ static int ql_mii_setup(struct ql3_adapter *qdev)
return -1;
if (qdev->device_id == QL3032_DEVICE_ID)
- ql_write_page0_reg(qdev,
+ ql_write_page0_reg(qdev,
&port_regs->macMIIMgmtControlReg, 0x0f00000);
/* Divide 125MHz clock by 28 to meet PHY timing requirements */
@@ -1936,7 +1936,7 @@ static int ql_populate_free_queue(struct ql3_adapter *qdev)
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
qdev->ndev->name, err);
dev_kfree_skb(lrg_buf_cb->skb);
lrg_buf_cb->skb = NULL;
@@ -2044,7 +2044,7 @@ static void ql_process_mac_tx_intr(struct ql3_adapter *qdev,
if(mac_rsp->flags & OB_MAC_IOCB_RSP_S) {
printk(KERN_WARNING "Frame short but, frame was padded and sent.\n");
}
-
+
tx_cb = &qdev->tx_buf[mac_rsp->transaction_id];
/* Check the transmit response flags for any errors */
@@ -2108,13 +2108,13 @@ static struct ql_rcv_buf_cb *ql_get_lbuf(struct ql3_adapter *qdev)
/*
* The difference between 3022 and 3032 for inbound completions:
- * 3022 uses two buffers per completion. The first buffer contains
- * (some) header info, the second the remainder of the headers plus
- * the data. For this chip we reserve some space at the top of the
- * receive buffer so that the header info in buffer one can be
- * prepended to the buffer two. Buffer two is the sent up while
+ * 3022 uses two buffers per completion. The first buffer contains
+ * (some) header info, the second the remainder of the headers plus
+ * the data. For this chip we reserve some space at the top of the
+ * receive buffer so that the header info in buffer one can be
+ * prepended to the buffer two. Buffer two is the sent up while
* buffer one is returned to the hardware to be reused.
- * 3032 receives all of it's data and headers in one buffer for a
+ * 3032 receives all of it's data and headers in one buffer for a
* simpler process. 3032 also supports checksum verification as
* can be seen in ql_process_macip_rx_intr().
*/
@@ -2205,13 +2205,13 @@ static void ql_process_macip_rx_intr(struct ql3_adapter *qdev,
skb_push(skb2, size), size);
} else {
u16 checksum = le16_to_cpu(ib_ip_rsp_ptr->checksum);
- if (checksum &
- (IB_IP_IOCB_RSP_3032_ICE |
- IB_IP_IOCB_RSP_3032_CE)) {
+ if (checksum &
+ (IB_IP_IOCB_RSP_3032_ICE |
+ IB_IP_IOCB_RSP_3032_CE)) {
printk(KERN_ERR
"%s: Bad checksum for this %s packet, checksum = %x.\n",
__func__,
- ((checksum &
+ ((checksum &
IB_IP_IOCB_RSP_3032_TCP) ? "TCP" :
"UDP"),checksum);
} else if ((checksum & IB_IP_IOCB_RSP_3032_TCP) ||
@@ -2394,12 +2394,12 @@ static irqreturn_t ql3xxx_isr(int irq, void *dev_id)
}
/*
- * Get the total number of segments needed for the
+ * Get the total number of segments needed for the
* given number of fragments. This is necessary because
* outbound address lists (OAL) will be used when more than
- * two frags are given. Each address list has 5 addr/len
+ * two frags are given. Each address list has 5 addr/len
* pairs. The 5th pair in each AOL is used to point to
- * the next AOL if more frags are coming.
+ * the next AOL if more frags are coming.
* That is why the frags:segment count ratio is not linear.
*/
static int ql_get_seg_count(struct ql3_adapter *qdev,
@@ -2476,12 +2476,12 @@ static int ql_send_map(struct ql3_adapter *qdev,
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping failed with error: %d\n",
qdev->ndev->name, err);
return NETDEV_TX_BUSY;
}
-
+
oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
oal_entry->dma_lo = cpu_to_le32(LS_64BITS(map));
oal_entry->dma_hi = cpu_to_le32(MS_64BITS(map));
@@ -2511,7 +2511,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping outbound address list with error: %d\n",
qdev->ndev->name, err);
goto map_error;
}
@@ -2537,7 +2537,7 @@ static int ql_send_map(struct ql3_adapter *qdev,
err = pci_dma_mapping_error(map);
if(err) {
- printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
+ printk(KERN_ERR "%s: PCI mapping frags failed with error: %d\n",
qdev->ndev->name, err);
goto map_error;
}
@@ -2558,10 +2558,10 @@ static int ql_send_map(struct ql3_adapter *qdev,
map_error:
/* A PCI mapping failed and now we will need to back out
- * We need to traverse through the oal's and associated pages which
+ * We need to traverse through the oal's and associated pages which
* have been mapped and now we must unmap them to clean up properly
*/
-
+
seg = 1;
oal_entry = (struct oal_entry *)&mac_iocb_ptr->buf_addr0_low;
oal = tx_cb->oal;
@@ -2599,11 +2599,11 @@ map_error:
* The difference between 3022 and 3032 sends:
* 3022 only supports a simple single segment transmission.
* 3032 supports checksumming and scatter/gather lists (fragments).
- * The 3032 supports sglists by using the 3 addr/len pairs (ALP)
- * in the IOCB plus a chain of outbound address lists (OAL) that
- * each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th)
- * will used to point to an OAL when more ALP entries are required.
- * The IOCB is always the top of the chain followed by one or more
+ * The 3032 supports sglists by using the 3 addr/len pairs (ALP)
+ * in the IOCB plus a chain of outbound address lists (OAL) that
+ * each contain 5 ALPs. The last ALP of the IOCB (3rd) or OAL (5th)
+ * will used to point to an OAL when more ALP entries are required.
+ * The IOCB is always the top of the chain followed by one or more
* OALs (when necessary).
*/
static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
@@ -2617,14 +2617,14 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
if (unlikely(atomic_read(&qdev->tx_count) < 2)) {
return NETDEV_TX_BUSY;
}
-
+
tx_cb = &qdev->tx_buf[qdev->req_producer_index] ;
if((tx_cb->seg_count = ql_get_seg_count(qdev,
(skb_shinfo(skb)->nr_frags))) == -1) {
printk(KERN_ERR PFX"%s: invalid segment count!\n",__func__);
return NETDEV_TX_OK;
}
-
+
mac_iocb_ptr = tx_cb->queue_entry;
memset((void *)mac_iocb_ptr, 0, sizeof(struct ob_mac_iocb_req));
mac_iocb_ptr->opcode = qdev->mac_ob_opcode;
@@ -2636,12 +2636,12 @@ static int ql3xxx_send(struct sk_buff *skb, struct net_device *ndev)
if (qdev->device_id == QL3032_DEVICE_ID &&
skb->ip_summed == CHECKSUM_PARTIAL)
ql_hw_csum_setup(skb, mac_iocb_ptr);
-
+
if(ql_send_map(qdev,mac_iocb_ptr,tx_cb,skb) != NETDEV_TX_OK) {
printk(KERN_ERR PFX"%s: Could not map the segments!\n",__func__);
return NETDEV_TX_BUSY;
}
-
+
wmb();
qdev->req_producer_index++;
if (qdev->req_producer_index == NUM_REQ_Q_ENTRIES)
@@ -2739,7 +2739,7 @@ static int ql_alloc_buffer_queues(struct ql3_adapter *qdev)
"%s: qdev->lrg_buf alloc failed.\n", qdev->ndev->name);
return -ENOMEM;
}
-
+
qdev->lrg_buf_q_alloc_virt_addr =
pci_alloc_consistent(qdev->pdev,
qdev->lrg_buf_q_alloc_size,