summaryrefslogtreecommitdiff
path: root/drivers/net/sfc/tenxpress.c
diff options
context:
space:
mode:
authorBen Hutchings <bhutchings@solarflare.com>2008-12-26 13:48:00 -0800
committerDavid S. Miller <davem@davemloft.net>2008-12-26 13:48:00 -0800
commit307505e9a4ce0b13b2f996385669039806e07390 (patch)
tree964307da71ddcd8b5bfcced1d701d80964a1b090 /drivers/net/sfc/tenxpress.c
parent1796721a5a691a5d392abf8070ad40a0b787b667 (diff)
sfc: SFT9001: Add cable diagnostics
The SFT9001 firmware implements cable diagnostics; run those and include their results in a self-test. In case of a cable fault, do not fail the self-test as a whole; only faults in the NIC should cause that. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'drivers/net/sfc/tenxpress.c')
-rw-r--r--drivers/net/sfc/tenxpress.c115
1 files changed, 107 insertions, 8 deletions
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index bd204820e189..b9768760fae7 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -106,6 +106,25 @@
#define PMA_PMD_SPEED_LBN 4
#define PMA_PMD_SPEED_WIDTH 4
+/* Cable diagnostics - SFT9001 only */
+#define PMA_PMD_CDIAG_CTRL_REG 49213
+#define CDIAG_CTRL_IMMED_LBN 15
+#define CDIAG_CTRL_BRK_LINK_LBN 12
+#define CDIAG_CTRL_IN_PROG_LBN 11
+#define CDIAG_CTRL_LEN_UNIT_LBN 10
+#define CDIAG_CTRL_LEN_METRES 1
+#define PMA_PMD_CDIAG_RES_REG 49174
+#define CDIAG_RES_A_LBN 12
+#define CDIAG_RES_B_LBN 8
+#define CDIAG_RES_C_LBN 4
+#define CDIAG_RES_D_LBN 0
+#define CDIAG_RES_WIDTH 4
+#define CDIAG_RES_OPEN 2
+#define CDIAG_RES_OK 1
+#define CDIAG_RES_INVALID 0
+/* Set of 4 registers for pairs A-D */
+#define PMA_PMD_CDIAG_LEN_REG 49175
+
/* Serdes control registers - SFT9001 only */
#define PMA_PMD_CSERDES_CTRL_REG 64258
/* Set the 156.25 MHz output to 312.5 MHz to drive Falcon's XMAC */
@@ -654,12 +673,12 @@ void tenxpress_phy_blink(struct efx_nic *efx, bool blink)
PMA_PMD_LED_OVERR_REG, reg);
}
-static const char *const tenxpress_test_names[] = {
+static const char *const sfx7101_test_names[] = {
"bist"
};
static int
-tenxpress_run_tests(struct efx_nic *efx, int *results, unsigned flags)
+sfx7101_run_tests(struct efx_nic *efx, int *results, unsigned flags)
{
int rc;
@@ -672,6 +691,86 @@ tenxpress_run_tests(struct efx_nic *efx, int *results, unsigned flags)
return rc;
}
+static const char *const sft9001_test_names[] = {
+ "bist",
+ "cable.pairA.status",
+ "cable.pairB.status",
+ "cable.pairC.status",
+ "cable.pairD.status",
+ "cable.pairA.length",
+ "cable.pairB.length",
+ "cable.pairC.length",
+ "cable.pairD.length",
+};
+
+static int sft9001_run_tests(struct efx_nic *efx, int *results, unsigned flags)
+{
+ struct ethtool_cmd ecmd;
+ int phy_id = efx->mii.phy_id;
+ int rc = 0, rc2, i, res_reg;
+
+ if (!(flags & ETH_TEST_FL_OFFLINE))
+ return 0;
+
+ efx->phy_op->get_settings(efx, &ecmd);
+
+ /* Initialise cable diagnostic results to unknown failure */
+ for (i = 1; i < 9; ++i)
+ results[i] = -1;
+
+ /* Run cable diagnostics; wait up to 5 seconds for them to complete.
+ * A cable fault is not a self-test failure, but a timeout is. */
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+ PMA_PMD_CDIAG_CTRL_REG,
+ (1 << CDIAG_CTRL_IMMED_LBN) |
+ (1 << CDIAG_CTRL_BRK_LINK_LBN) |
+ (CDIAG_CTRL_LEN_METRES << CDIAG_CTRL_LEN_UNIT_LBN));
+ i = 0;
+ while (mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+ PMA_PMD_CDIAG_CTRL_REG) &
+ (1 << CDIAG_CTRL_IN_PROG_LBN)) {
+ if (++i == 50) {
+ rc = -ETIMEDOUT;
+ goto reset;
+ }
+ msleep(100);
+ }
+ res_reg = mdio_clause45_read(efx, efx->mii.phy_id, MDIO_MMD_PMAPMD,
+ PMA_PMD_CDIAG_RES_REG);
+ for (i = 0; i < 4; i++) {
+ int pair_res =
+ (res_reg >> (CDIAG_RES_A_LBN - i * CDIAG_RES_WIDTH))
+ & ((1 << CDIAG_RES_WIDTH) - 1);
+ int len_reg = mdio_clause45_read(efx, efx->mii.phy_id,
+ MDIO_MMD_PMAPMD,
+ PMA_PMD_CDIAG_LEN_REG + i);
+ if (pair_res == CDIAG_RES_OK)
+ results[1 + i] = 1;
+ else if (pair_res == CDIAG_RES_INVALID)
+ results[1 + i] = -1;
+ else
+ results[1 + i] = -pair_res;
+ if (pair_res != CDIAG_RES_INVALID &&
+ pair_res != CDIAG_RES_OPEN &&
+ len_reg != 0xffff)
+ results[5 + i] = len_reg;
+ }
+
+ /* We must reset to exit cable diagnostic mode. The BIST will
+ * also run when we do this. */
+reset:
+ rc2 = tenxpress_special_reset(efx);
+ results[0] = rc2 ? -1 : 1;
+ if (!rc)
+ rc = rc2;
+
+ rc2 = efx->phy_op->set_settings(efx, &ecmd);
+ if (!rc)
+ rc = rc2;
+
+ return rc;
+}
+
static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
{
int phy = efx->mii.phy_id;
@@ -784,9 +883,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
.clear_interrupt = efx_port_dummy_op_void,
.get_settings = sfx7101_get_settings,
.set_settings = mdio_clause45_set_settings,
- .num_tests = ARRAY_SIZE(tenxpress_test_names),
- .test_names = tenxpress_test_names,
- .run_tests = tenxpress_run_tests,
+ .num_tests = ARRAY_SIZE(sfx7101_test_names),
+ .test_names = sfx7101_test_names,
+ .run_tests = sfx7101_run_tests,
.mmds = TENXPRESS_REQUIRED_DEVS,
.loopbacks = SFX7101_LOOPBACKS,
};
@@ -801,9 +900,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = {
.get_settings = sft9001_get_settings,
.set_settings = sft9001_set_settings,
.set_xnp_advertise = sft9001_set_xnp_advertise,
- .num_tests = ARRAY_SIZE(tenxpress_test_names),
- .test_names = tenxpress_test_names,
- .run_tests = tenxpress_run_tests,
+ .num_tests = ARRAY_SIZE(sft9001_test_names),
+ .test_names = sft9001_test_names,
+ .run_tests = sft9001_run_tests,
.mmds = TENXPRESS_REQUIRED_DEVS,
.loopbacks = SFT9001_LOOPBACKS,
};