diff options
| author | Ben Hutchings <ben@decadent.org.uk> | 2010-01-07 02:41:51 +0000 |
|---|---|---|
| committer | Greg Kroah-Hartman <gregkh@suse.de> | 2010-07-05 11:11:10 -0700 |
| commit | 411f04e3b62272894de8829e80bce5a22d1dca38 (patch) | |
| tree | 20427206641ef5ae921d7af1bce5d8976ba13fe6 /drivers/net/tulip/tulip_core.c | |
| parent | 3a088cb06e66adb133052d3fab43ec0cebb4f709 (diff) | |
dmfe/tulip: Let dmfe handle DM910x except for SPARC on-board chips
commit 4d907069bc1b745f4abd4745c332d33098e733b8 upstream.
The Davicom DM9100 and DM9102 chips are used on the motherboards of
some SPARC systems (supported by the tulip driver) and also in PCI
expansion cards (supported by the dmfe driver). There is no
difference in the PCI device ids for the two different configurations,
so these drivers both claim the device ids. However, it is possible
to distinguish the two configurations by the presence of Open Firmware
properties for them, so we do that.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Grant Grundler <grundler@parisc-linux.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Diffstat (limited to 'drivers/net/tulip/tulip_core.c')
| -rw-r--r-- | drivers/net/tulip/tulip_core.c | 32 |
1 files changed, 25 insertions, 7 deletions
diff --git a/drivers/net/tulip/tulip_core.c b/drivers/net/tulip/tulip_core.c index 6b2330e4206e..88bf54f8562c 100644 --- a/drivers/net/tulip/tulip_core.c +++ b/drivers/net/tulip/tulip_core.c @@ -196,9 +196,13 @@ struct tulip_chip_table tulip_tbl[] = { | HAS_NWAY | HAS_PCI_MWI, tulip_timer, tulip_media_task }, /* DM910X */ +#ifdef CONFIG_TULIP_DM910X { "Davicom DM9102/DM9102A", 128, 0x0001ebef, HAS_MII | HAS_MEDIA_TABLE | CSR12_IN_SROM | HAS_ACPI, tulip_timer, tulip_media_task }, +#else + { NULL }, +#endif /* RS7112 */ { "Conexant LANfinity", 256, 0x0001ebef, @@ -228,8 +232,10 @@ static struct pci_device_id tulip_pci_tbl[] = { { 0x1259, 0xa120, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x11F6, 0x9881, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMPEX9881 }, { 0x8086, 0x0039, PCI_ANY_ID, PCI_ANY_ID, 0, 0, I21145 }, +#ifdef CONFIG_TULIP_DM910X { 0x1282, 0x9100, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, { 0x1282, 0x9102, PCI_ANY_ID, PCI_ANY_ID, 0, 0, DM910X }, +#endif { 0x1113, 0x1216, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, { 0x1113, 0x1217, PCI_ANY_ID, PCI_ANY_ID, 0, 0, MX98715 }, { 0x1113, 0x9511, PCI_ANY_ID, PCI_ANY_ID, 0, 0, COMET }, @@ -1299,18 +1305,30 @@ static int __devinit tulip_init_one (struct pci_dev *pdev, } /* - * Early DM9100's need software CRC and the DMFE driver + * DM910x chips should be handled by the dmfe driver, except + * on-board chips on SPARC systems. Also, early DM9100s need + * software CRC which only the dmfe driver supports. */ - if (pdev->vendor == 0x1282 && pdev->device == 0x9100) - { - /* Read Chip revision */ - if (pdev->revision < 0x30) - { - printk(KERN_ERR PFX "skipping early DM9100 with Crc bug (use dmfe)\n"); +#ifdef CONFIG_TULIP_DM910X + if (chip_idx == DM910X) { + struct device_node *dp; + + if (pdev->vendor == 0x1282 && pdev->device == 0x9100 && + pdev->revision < 0x30) { + printk(KERN_INFO PFX + "skipping early DM9100 with Crc bug (use dmfe)\n"); + return -ENODEV; + } + + dp = pci_device_to_OF_node(pdev); + if (!(dp && of_get_property(dp, "local-mac-address", NULL))) { + printk(KERN_INFO PFX + "skipping DM910x expansion card (use dmfe)\n"); return -ENODEV; } } +#endif /* * Looks for early PCI chipsets where people report hangs |